AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:082d3600
  set TERM
  ph data[0]=0:82d3600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff2b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff2c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff2c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:082d3800
  set TERM
  ph data[0]=0:82d3800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff2c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff2d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff2d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:082d3a00
  set TERM
  ph data[0]=0:82d3a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff2d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff2e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff2e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:082d3c00
  set TERM
  ph data[0]=0:82d3c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff2e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff2f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff2f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:082d3e00
  set TERM
  ph data[0]=0:82d3e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff2f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff30, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff30, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:082d4000
  set TERM
  ph data[0]=0:82d4000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff30, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff31, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff31, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:082d4200
  set TERM
  ph data[0]=0:82d4200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff31, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff32, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff32, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:082d4400
  set TERM
  ph data[0]=0:82d4400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff32, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff33, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff33, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:082d4600
  set TERM
  ph data[0]=0:82d4600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff33, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff34, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff34, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:082d4800
  set TERM
  ph data[0]=0:82d4800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff34, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff35, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff35, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:082d4a00
  set TERM
  ph data[0]=0:82d4a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff35, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff36, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff36, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:082d4c00
  set TERM
  ph data[0]=0:82d4c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff36, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff37, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff37, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:082d4e00
  set TERM
  ph data[0]=0:82d4e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff37, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff38, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff38, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:082d5000
  set TERM
  ph data[0]=0:82d5000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff38, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff39, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff39, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:082d5200
  set TERM
  ph data[0]=0:82d5200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff39, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff3a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff3a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:082d5400
  set TERM
  ph data[0]=0:82d5400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff3a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff3b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff3b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:082d5600
  set TERM
  ph data[0]=0:82d5600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff3b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff3c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff3c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:082d5800
  set TERM
  ph data[0]=0:82d5800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff3c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff3d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff3d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:082d5a00
  set TERM
  ph data[0]=0:82d5a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff3d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff3e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff3e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:082d5c00
  set TERM
  ph data[0]=0:82d5c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff3e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff3f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:082d5e00
  set TERM
  ph data[0]=0:82d5e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff3f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff40, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff40, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:082d6000
  set TERM
  ph data[0]=0:82d6000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff40, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff41, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff41, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:082d6200
  set TERM
  ph data[0]=0:82d6200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff41, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff42, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff42, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:082d6400
  set TERM
  ph data[0]=0:82d6400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff42, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff43, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff43, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:082d6600
  set TERM
  ph data[0]=0:82d6600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff43, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff44, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff44, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:082d6800
  set TERM
  ph data[0]=0:82d6800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff44, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff45, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff45, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:082d6a00
  set TERM
  ph data[0]=0:82d6a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff45, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff46, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff46, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:082d6c00
  set TERM
  ph data[0]=0:82d6c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff46, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff47, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff47, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:082d6e00
  set TERM
  ph data[0]=0:82d6e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff47, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff48, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff48, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:082d7000
  set TERM
  ph data[0]=0:82d7000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff48, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff49, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff49, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:082d7200
  set TERM
  ph data[0]=0:82d7200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff49, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff4a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff4a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:082d7400
  set TERM
  ph data[0]=0:82d7400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff4a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff4b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff4b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:082d7600
  set TERM
  ph data[0]=0:82d7600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff4b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff4c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff4c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:082d7800
  set TERM
  ph data[0]=0:82d7800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff4c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff4d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff4d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:082d7a00
  set TERM
  ph data[0]=0:82d7a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff4d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff4e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff4e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:082d7c00
  set TERM
  ph data[0]=0:82d7c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff4e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff4f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff4f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:082d7e00
  set TERM
  ph data[0]=0:82d7e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff4f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff50, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff50, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:082d8000
  set TERM
  ph data[0]=0:82d8000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff50, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff51, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff51, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:082d8200
  set TERM
  ph data[0]=0:82d8200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff51, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff52, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff52, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:082d8400
  set TERM
  ph data[0]=0:82d8400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff52, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff53, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff53, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:082d8600
  set TERM
  ph data[0]=0:82d8600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff53, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff54, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff54, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:082d8800
  set TERM
  ph data[0]=0:82d8800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff54, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff55, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff55, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:082d8a00
  set TERM
  ph data[0]=0:82d8a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff55, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff56, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff56, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:082d8c00
  set TERM
  ph data[0]=0:82d8c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff56, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff57, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff57, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:082d8e00
  set TERM
  ph data[0]=0:82d8e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff57, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff58, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff58, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:082d9000
  set TERM
  ph data[0]=0:82d9000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff58, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff59, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff59, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:082d9200
  set TERM
  ph data[0]=0:82d9200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff59, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff5a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff5a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:082d9400
  set TERM
  ph data[0]=0:82d9400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff5a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff5b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff5b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:082d9600
  set TERM
  ph data[0]=0:82d9600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff5b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff5c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff5c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:082d9800
  set TERM
  ph data[0]=0:82d9800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff5c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff5d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff5d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:082d9a00
  set TERM
  ph data[0]=0:82d9a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff5d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff5e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff5e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:082d9c00
  set TERM
  ph data[0]=0:82d9c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff5e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff5f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff5f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:082d9e00
  set TERM
  ph data[0]=0:82d9e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff5f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff60, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff60, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:082da000
  set TERM
  ph data[0]=0:82da000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff60, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff61, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff61, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:082da200
  set TERM
  ph data[0]=0:82da200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff61, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff62, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff62, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:082da400
  set TERM
  ph data[0]=0:82da400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff62, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff63, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff63, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:082da600
  set TERM
  ph data[0]=0:82da600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff63, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff64, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff64, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:082da800
  set TERM
  ph data[0]=0:82da800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff64, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff65, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff65, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:082daa00
  set TERM
  ph data[0]=0:82daa00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff65, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff66, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff66, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:082dac00
  set TERM
  ph data[0]=0:82dac00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff66, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff67, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff67, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:082dae00
  set TERM
  ph data[0]=0:82dae00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff67, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff68, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff68, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:082db000
  set TERM
  ph data[0]=0:82db000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff68, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff69, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff69, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:082db200
  set TERM
  ph data[0]=0:82db200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff69, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff6a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff6a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:082db400
  set TERM
  ph data[0]=0:82db400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff6a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff6b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff6b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:082db600
  set TERM
  ph data[0]=0:82db600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff6b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff6c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff6c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:082db800
  set TERM
  ph data[0]=0:82db800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff6c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff6d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff6d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:082dba00
  set TERM
  ph data[0]=0:82dba00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff6d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff6e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff6e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:082dbc00
  set TERM
  ph data[0]=0:82dbc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff6e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff6f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff6f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:082dbe00
  set TERM
  ph data[0]=0:82dbe00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff6f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff70, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff70, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:082dc000
  set TERM
  ph data[0]=0:82dc000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff70, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff71, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff71, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:082dc200
  set TERM
  ph data[0]=0:82dc200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff71, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff72, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff72, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:082dc400
  set TERM
  ph data[0]=0:82dc400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff72, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff73, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff73, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:082dc600
  set TERM
  ph data[0]=0:82dc600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff73, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff74, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff74, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:082dc800
  set TERM
  ph data[0]=0:82dc800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff74, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff75, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff75, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:082dca00
  set TERM
  ph data[0]=0:82dca00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff75, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff76, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff76, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:082dcc00
  set TERM
  ph data[0]=0:82dcc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff76, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff77, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff77, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:082dce00
  set TERM
  ph data[0]=0:82dce00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff77, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff78, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff78, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:082dd000
  set TERM
  ph data[0]=0:82dd000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff78, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff79, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff79, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:082dd200
  set TERM
  ph data[0]=0:82dd200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff79, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff7a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff7a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:082dd400
  set TERM
  ph data[0]=0:82dd400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff7a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff7b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff7b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:082dd600
  set TERM
  ph data[0]=0:82dd600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff7b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff7c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff7c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:082dd800
  set TERM
  ph data[0]=0:82dd800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff7c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff7d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff7d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:082dda00
  set TERM
  ph data[0]=0:82dda00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff7d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff7e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff7e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:082ddc00
  set TERM
  ph data[0]=0:82ddc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff7e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff7f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff7f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:082dde00
  set TERM
  ph data[0]=0:82dde00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff7f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff80, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff80, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:082de000
  set TERM
  ph data[0]=0:82de000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff80, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff81, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff81, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:082de200
  set TERM
  ph data[0]=0:82de200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff81, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff82, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff82, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:082de400
  set TERM
  ph data[0]=0:82de400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff82, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff83, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff83, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:082de600
  set TERM
  ph data[0]=0:82de600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff83, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff84, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff84, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:082de800
  set TERM
  ph data[0]=0:82de800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff84, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff85, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff85, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:082dea00
  set TERM
  ph data[0]=0:82dea00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff85, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff86, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff86, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:082dec00
  set TERM
  ph data[0]=0:82dec00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff86, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff87, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff87, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:082dee00
  set TERM
  ph data[0]=0:82dee00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff87, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff88, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff88, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:082df000
  set TERM
  ph data[0]=0:82df000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff88, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff89, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff89, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:082df200
  set TERM
  ph data[0]=0:82df200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff89, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff8a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff8a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:082df400
  set TERM
  ph data[0]=0:82df400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff8a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff8b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff8b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:082df600
  set TERM
  ph data[0]=0:82df600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff8b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff8c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff8c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:082df800
  set TERM
  ph data[0]=0:82df800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff8c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff8d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff8d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:082dfa00
  set TERM
  ph data[0]=0:82dfa00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff8d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff8e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff8e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:082dfc00
  set TERM
  ph data[0]=0:82dfc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff8e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff8f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff8f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:082dfe00
  set TERM
  ph data[0]=0:82dfe00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff8f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff90, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff90, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:082e0000
  set TERM
  ph data[0]=0:82e0000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff90, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff91, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff91, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:082e0200
  set TERM
  ph data[0]=0:82e0200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff91, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff92, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff92, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:082e0400
  set TERM
  ph data[0]=0:82e0400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff92, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff93, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff93, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:082e0600
  set TERM
  ph data[0]=0:82e0600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff93, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff94, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff94, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:082e0800
  set TERM
  ph data[0]=0:82e0800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff94, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff95, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff95, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:082e0a00
  set TERM
  ph data[0]=0:82e0a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff95, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff96, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff96, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:082e0c00
  set TERM
  ph data[0]=0:82e0c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff96, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff97, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff97, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:082e0e00
  set TERM
  ph data[0]=0:82e0e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff97, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff98, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff98, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:082e1000
  set TERM
  ph data[0]=0:82e1000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff98, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff99, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff99, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:082e1200
  set TERM
  ph data[0]=0:82e1200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff99, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff9a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff9a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:082e1400
  set TERM
  ph data[0]=0:82e1400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff9a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff9b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff9b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:082e1600
  set TERM
  ph data[0]=0:82e1600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff9b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff9c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff9c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:082e1800
  set TERM
  ph data[0]=0:82e1800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff9c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff9d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff9d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:082e1a00
  set TERM
  ph data[0]=0:82e1a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff9d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff9e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff9e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:082e1c00
  set TERM
  ph data[0]=0:82e1c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff9e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ff9f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ff9f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:082e1e00
  set TERM
  ph data[0]=0:82e1e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ff9f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ffa0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ffa0, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:082e2000
  set TERM
  ph data[0]=0:82e2000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ffa0, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ffa1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ffa1, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:082e2200
  set TERM
  ph data[0]=0:82e2200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ffa1, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 70ffa2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 70ffa2, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:082e2400
  set TERM
  ph data[0]=0:82e2400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x70ffa2, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102e4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102e4, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0834a800
  set TERM
  ph data[0]=0:834a800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102e4, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102e5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102e5, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0834aa00
  set TERM
  ph data[0]=0:834aa00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102e5, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102e6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102e6, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0834ac00
  set TERM
  ph data[0]=0:834ac00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102e6, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102e7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102e7, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0834ae00
  set TERM
  ph data[0]=0:834ae00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102e7, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102e8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102e8, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0834b000
  set TERM
  ph data[0]=0:834b000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102e8, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102e9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102e9, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0834b200
  set TERM
  ph data[0]=0:834b200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102e9, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102ea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102ea, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0834b400
  set TERM
  ph data[0]=0:834b400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102ea, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102eb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102eb, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0834b600
  set TERM
  ph data[0]=0:834b600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102eb, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102ec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102ec, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0834b800
  set TERM
  ph data[0]=0:834b800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102ec, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102ed, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102ed, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0834ba00
  set TERM
  ph data[0]=0:834ba00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102ed, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102ee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102ee, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0834bc00
  set TERM
  ph data[0]=0:834bc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102ee, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102ef, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102ef, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0834be00
  set TERM
  ph data[0]=0:834be00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102ef, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102f0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102f0, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0834c000
  set TERM
  ph data[0]=0:834c000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102f0, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102f1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102f1, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0834c200
  set TERM
  ph data[0]=0:834c200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102f1, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102f2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102f2, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0834c400
  set TERM
  ph data[0]=0:834c400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102f2, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102f3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102f3, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0834c600
  set TERM
  ph data[0]=0:834c600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102f3, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102f4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102f4, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0834c800
  set TERM
  ph data[0]=0:834c800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102f4, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102f5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102f5, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0834ca00
  set TERM
  ph data[0]=0:834ca00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102f5, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102f6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102f6, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0834cc00
  set TERM
  ph data[0]=0:834cc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102f6, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102f7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102f7, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0834ce00
  set TERM
  ph data[0]=0:834ce00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102f7, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102f8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102f8, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0834d000
  set TERM
  ph data[0]=0:834d000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102f8, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102f9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102f9, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0834d200
  set TERM
  ph data[0]=0:834d200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102f9, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102fa, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102fa, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0834d400
  set TERM
  ph data[0]=0:834d400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102fa, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102fb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102fb, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0834d600
  set TERM
  ph data[0]=0:834d600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102fb, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102fc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102fc, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0834d800
  set TERM
  ph data[0]=0:834d800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102fc, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102fd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102fd, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0834da00
  set TERM
  ph data[0]=0:834da00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102fd, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102fe, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102fe, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0834dc00
  set TERM
  ph data[0]=0:834dc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102fe, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7102ff, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7102ff, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0834de00
  set TERM
  ph data[0]=0:834de00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7102ff, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710300, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710300, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0834e000
  set TERM
  ph data[0]=0:834e000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710300, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710301, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710301, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0834e200
  set TERM
  ph data[0]=0:834e200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710301, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710302, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710302, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0834e400
  set TERM
  ph data[0]=0:834e400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710302, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710303, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710303, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0834e600
  set TERM
  ph data[0]=0:834e600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710303, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710304, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710304, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0834e800
  set TERM
  ph data[0]=0:834e800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710304, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710305, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710305, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0834ea00
  set TERM
  ph data[0]=0:834ea00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710305, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710306, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710306, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0834ec00
  set TERM
  ph data[0]=0:834ec00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710306, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710307, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710307, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0834ee00
  set TERM
  ph data[0]=0:834ee00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710307, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710308, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710308, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0834f000
  set TERM
  ph data[0]=0:834f000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710308, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710309, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710309, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0834f200
  set TERM
  ph data[0]=0:834f200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710309, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71030a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71030a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0834f400
  set TERM
  ph data[0]=0:834f400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71030a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71030b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71030b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0834f600
  set TERM
  ph data[0]=0:834f600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71030b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71030c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71030c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0834f800
  set TERM
  ph data[0]=0:834f800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71030c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71030d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71030d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0834fa00
  set TERM
  ph data[0]=0:834fa00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71030d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71030e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71030e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0834fc00
  set TERM
  ph data[0]=0:834fc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71030e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71030f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71030f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0834fe00
  set TERM
  ph data[0]=0:834fe00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71030f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710310, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710310, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08350000
  set TERM
  ph data[0]=0:8350000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710310, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710311, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710311, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08350200
  set TERM
  ph data[0]=0:8350200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710311, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710312, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710312, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08350400
  set TERM
  ph data[0]=0:8350400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710312, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710313, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710313, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08350600
  set TERM
  ph data[0]=0:8350600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710313, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710314, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710314, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08350800
  set TERM
  ph data[0]=0:8350800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710314, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710315, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710315, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08350a00
  set TERM
  ph data[0]=0:8350a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710315, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710316, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710316, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08350c00
  set TERM
  ph data[0]=0:8350c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710316, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710317, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710317, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08350e00
  set TERM
  ph data[0]=0:8350e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710317, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710318, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710318, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08351000
  set TERM
  ph data[0]=0:8351000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710318, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710319, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710319, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08351200
  set TERM
  ph data[0]=0:8351200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710319, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71031a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71031a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08351400
  set TERM
  ph data[0]=0:8351400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71031a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71031b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71031b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08351600
  set TERM
  ph data[0]=0:8351600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71031b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71031c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71031c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08351800
  set TERM
  ph data[0]=0:8351800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71031c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71031d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71031d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08351a00
  set TERM
  ph data[0]=0:8351a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71031d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71031e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71031e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08351c00
  set TERM
  ph data[0]=0:8351c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71031e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71031f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71031f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08351e00
  set TERM
  ph data[0]=0:8351e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71031f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710320, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710320, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08352000
  set TERM
  ph data[0]=0:8352000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710320, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710321, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710321, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08352200
  set TERM
  ph data[0]=0:8352200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710321, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710322, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710322, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08352400
  set TERM
  ph data[0]=0:8352400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710322, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710323, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710323, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08352600
  set TERM
  ph data[0]=0:8352600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710323, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710324, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710324, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08352800
  set TERM
  ph data[0]=0:8352800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710324, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710325, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710325, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08352a00
  set TERM
  ph data[0]=0:8352a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710325, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710326, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710326, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08352c00
  set TERM
  ph data[0]=0:8352c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710326, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710327, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710327, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08352e00
  set TERM
  ph data[0]=0:8352e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710327, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710328, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710328, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08353000
  set TERM
  ph data[0]=0:8353000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710328, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710329, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710329, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08353200
  set TERM
  ph data[0]=0:8353200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710329, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71032a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71032a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08353400
  set TERM
  ph data[0]=0:8353400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71032a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71032b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71032b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08353600
  set TERM
  ph data[0]=0:8353600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71032b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71032c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71032c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08353800
  set TERM
  ph data[0]=0:8353800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71032c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71032d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71032d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08353a00
  set TERM
  ph data[0]=0:8353a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71032d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71032e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71032e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08353c00
  set TERM
  ph data[0]=0:8353c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71032e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71032f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71032f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08353e00
  set TERM
  ph data[0]=0:8353e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71032f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710330, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710330, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08354000
  set TERM
  ph data[0]=0:8354000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710330, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710331, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710331, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08354200
  set TERM
  ph data[0]=0:8354200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710331, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710332, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710332, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08354400
  set TERM
  ph data[0]=0:8354400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710332, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710333, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710333, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08354600
  set TERM
  ph data[0]=0:8354600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710333, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710334, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710334, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08354800
  set TERM
  ph data[0]=0:8354800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710334, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710335, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710335, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08354a00
  set TERM
  ph data[0]=0:8354a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710335, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710336, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710336, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08354c00
  set TERM
  ph data[0]=0:8354c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710336, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710337, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710337, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08354e00
  set TERM
  ph data[0]=0:8354e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710337, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710338, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710338, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08355000
  set TERM
  ph data[0]=0:8355000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710338, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710339, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710339, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08355200
  set TERM
  ph data[0]=0:8355200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710339, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71033a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71033a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08355400
  set TERM
  ph data[0]=0:8355400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71033a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71033b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71033b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08355600
  set TERM
  ph data[0]=0:8355600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71033b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71033c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71033c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08355800
  set TERM
  ph data[0]=0:8355800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71033c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71033d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71033d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08355a00
  set TERM
  ph data[0]=0:8355a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71033d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71033e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71033e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08355c00
  set TERM
  ph data[0]=0:8355c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71033e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71033f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71033f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08355e00
  set TERM
  ph data[0]=0:8355e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71033f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710340, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710340, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08356000
  set TERM
  ph data[0]=0:8356000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710340, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710341, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710341, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08356200
  set TERM
  ph data[0]=0:8356200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710341, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710342, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710342, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08356400
  set TERM
  ph data[0]=0:8356400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710342, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710343, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710343, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08356600
  set TERM
  ph data[0]=0:8356600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710343, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710344, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710344, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08356800
  set TERM
  ph data[0]=0:8356800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710344, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710345, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710345, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08356a00
  set TERM
  ph data[0]=0:8356a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710345, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710346, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710346, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08356c00
  set TERM
  ph data[0]=0:8356c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710346, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710347, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710347, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08356e00
  set TERM
  ph data[0]=0:8356e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710347, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710348, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710348, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08357000
  set TERM
  ph data[0]=0:8357000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710348, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710349, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710349, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08357200
  set TERM
  ph data[0]=0:8357200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710349, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71034a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71034a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08357400
  set TERM
  ph data[0]=0:8357400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71034a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71034b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71034b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08357600
  set TERM
  ph data[0]=0:8357600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71034b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71034c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71034c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08357800
  set TERM
  ph data[0]=0:8357800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71034c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71034d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71034d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08357a00
  set TERM
  ph data[0]=0:8357a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71034d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71034e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71034e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08357c00
  set TERM
  ph data[0]=0:8357c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71034e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71034f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71034f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08357e00
  set TERM
  ph data[0]=0:8357e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71034f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710350, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710350, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08358000
  set TERM
  ph data[0]=0:8358000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710350, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710351, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710351, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08358200
  set TERM
  ph data[0]=0:8358200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710351, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710352, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710352, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08358400
  set TERM
  ph data[0]=0:8358400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710352, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710353, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710353, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08358600
  set TERM
  ph data[0]=0:8358600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710353, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710354, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710354, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08358800
  set TERM
  ph data[0]=0:8358800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710354, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710355, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710355, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08358a00
  set TERM
  ph data[0]=0:8358a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710355, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710356, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710356, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08358c00
  set TERM
  ph data[0]=0:8358c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710356, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710357, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710357, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08358e00
  set TERM
  ph data[0]=0:8358e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710357, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710358, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710358, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08359000
  set TERM
  ph data[0]=0:8359000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710358, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710359, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710359, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08359200
  set TERM
  ph data[0]=0:8359200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710359, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71035a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71035a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08359400
  set TERM
  ph data[0]=0:8359400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71035a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71035b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71035b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08359600
  set TERM
  ph data[0]=0:8359600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71035b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71035c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71035c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08359800
  set TERM
  ph data[0]=0:8359800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71035c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71035d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71035d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08359a00
  set TERM
  ph data[0]=0:8359a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71035d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71035e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71035e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08359c00
  set TERM
  ph data[0]=0:8359c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71035e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71035f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71035f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08359e00
  set TERM
  ph data[0]=0:8359e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71035f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710360, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710360, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0835a000
  set TERM
  ph data[0]=0:835a000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710360, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710361, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710361, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0835a200
  set TERM
  ph data[0]=0:835a200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710361, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710362, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710362, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0835a400
  set TERM
  ph data[0]=0:835a400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710362, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710363, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710363, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0835a600
  set TERM
  ph data[0]=0:835a600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710363, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710364, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710364, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0835a800
  set TERM
  ph data[0]=0:835a800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710364, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710365, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710365, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0835aa00
  set TERM
  ph data[0]=0:835aa00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710365, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710366, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710366, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0835ac00
  set TERM
  ph data[0]=0:835ac00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710366, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710367, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710367, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0835ae00
  set TERM
  ph data[0]=0:835ae00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710367, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710368, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710368, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0835b000
  set TERM
  ph data[0]=0:835b000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710368, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710369, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710369, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0835b200
  set TERM
  ph data[0]=0:835b200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710369, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71036a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71036a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0835b400
  set TERM
  ph data[0]=0:835b400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71036a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71036b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71036b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0835b600
  set TERM
  ph data[0]=0:835b600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71036b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0xAtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7109f5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7109f5, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0842ca00
  set TERM
  ph data[0]=0:842ca00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7109f5, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7109f6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7109f6, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0842cc00
  set TERM
  ph data[0]=0:842cc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7109f6, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7109f7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7109f7, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0842ce00
  set TERM
  ph data[0]=0:842ce00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7109f7, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7109f8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7109f8, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0842d000
  set TERM
  ph data[0]=0:842d000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7109f8, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7109f9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7109f9, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0842d200
  set TERM
  ph data[0]=0:842d200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7109f9, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7109fa, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7109fa, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0842d400
  set TERM
  ph data[0]=0:842d400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7109fa, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7109fb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7109fb, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0842d600
  set TERM
  ph data[0]=0:842d600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7109fb, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7109fc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7109fc, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0842d800
  set TERM
  ph data[0]=0:842d800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7109fc, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7109fd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7109fd, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0842da00
  set TERM
  ph data[0]=0:842da00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7109fd, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7109fe, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7109fe, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0842dc00
  set TERM
  ph data[0]=0:842dc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7109fe, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7109ff, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7109ff, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0842de00
  set TERM
  ph data[0]=0:842de00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7109ff, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a00, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a00, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0842e000
  set TERM
  ph data[0]=0:842e000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a00, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a01, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a01, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0842e200
  set TERM
  ph data[0]=0:842e200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a01, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a02, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a02, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0842e400
  set TERM
  ph data[0]=0:842e400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a02, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a03, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a03, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0842e600
  set TERM
  ph data[0]=0:842e600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a03, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a04, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a04, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0842e800
  set TERM
  ph data[0]=0:842e800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a04, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a05, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a05, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0842ea00
  set TERM
  ph data[0]=0:842ea00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a05, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a06, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a06, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0842ec00
  set TERM
  ph data[0]=0:842ec00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a06, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a07, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a07, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0842ee00
  set TERM
  ph data[0]=0:842ee00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a07, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a08, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a08, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0842f000
  set TERM
  ph data[0]=0:842f000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a08, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a09, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a09, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0842f200
  set TERM
  ph data[0]=0:842f200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a09, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a0a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a0a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0842f400
  set TERM
  ph data[0]=0:842f400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a0a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a0b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a0b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0842f600
  set TERM
  ph data[0]=0:842f600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a0b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a0c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a0c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0842f800
  set TERM
  ph data[0]=0:842f800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a0c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a0d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a0d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0842fa00
  set TERM
  ph data[0]=0:842fa00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a0d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a0e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a0e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0842fc00
  set TERM
  ph data[0]=0:842fc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a0e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a0f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a0f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0842fe00
  set TERM
  ph data[0]=0:842fe00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a0f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a10, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a10, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08430000
  set TERM
  ph data[0]=0:8430000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a10, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a11, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a11, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08430200
  set TERM
  ph data[0]=0:8430200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a11, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a12, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a12, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08430400
  set TERM
  ph data[0]=0:8430400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a12, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a13, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a13, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08430600
  set TERM
  ph data[0]=0:8430600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a13, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a14, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a14, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08430800
  set TERM
  ph data[0]=0:8430800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a14, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a15, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a15, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08430a00
  set TERM
  ph data[0]=0:8430a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a15, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a16, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a16, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08430c00
  set TERM
  ph data[0]=0:8430c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a16, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a17, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a17, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08430e00
  set TERM
  ph data[0]=0:8430e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a17, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a18, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a18, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08431000
  set TERM
  ph data[0]=0:8431000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a18, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a19, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a19, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08431200
  set TERM
  ph data[0]=0:8431200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a19, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a1a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a1a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08431400
  set TERM
  ph data[0]=0:8431400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a1a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a1b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a1b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08431600
  set TERM
  ph data[0]=0:8431600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a1b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a1c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a1c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08431800
  set TERM
  ph data[0]=0:8431800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a1c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a1d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a1d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08431a00
  set TERM
  ph data[0]=0:8431a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a1d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a1e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a1e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08431c00
  set TERM
  ph data[0]=0:8431c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a1e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a1f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a1f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08431e00
  set TERM
  ph data[0]=0:8431e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a1f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a20, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a20, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08432000
  set TERM
  ph data[0]=0:8432000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a20, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a21, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a21, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08432200
  set TERM
  ph data[0]=0:8432200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a21, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a22, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a22, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08432400
  set TERM
  ph data[0]=0:8432400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a22, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a23, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a23, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08432600
  set TERM
  ph data[0]=0:8432600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a23, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a24, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a24, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08432800
  set TERM
  ph data[0]=0:8432800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a24, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a25, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a25, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08432a00
  set TERM
  ph data[0]=0:8432a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a25, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a26, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a26, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08432c00
  set TERM
  ph data[0]=0:8432c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a26, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a27, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a27, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08432e00
  set TERM
  ph data[0]=0:8432e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a27, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a28, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a28, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08433000
  set TERM
  ph data[0]=0:8433000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a28, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a29, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a29, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08433200
  set TERM
  ph data[0]=0:8433200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a29, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a2a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a2a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08433400
  set TERM
  ph data[0]=0:8433400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a2a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a2b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a2b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08433600
  set TERM
  ph data[0]=0:8433600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a2b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a2c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a2c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08433800
  set TERM
  ph data[0]=0:8433800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a2c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a2d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a2d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08433a00
  set TERM
  ph data[0]=0:8433a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a2d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a2e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a2e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08433c00
  set TERM
  ph data[0]=0:8433c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a2e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a2f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a2f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08433e00
  set TERM
  ph data[0]=0:8433e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a2f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a30, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a30, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08434000
  set TERM
  ph data[0]=0:8434000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a30, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a31, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a31, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08434200
  set TERM
  ph data[0]=0:8434200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a31, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a32, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a32, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08434400
  set TERM
  ph data[0]=0:8434400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a32, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a33, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a33, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08434600
  set TERM
  ph data[0]=0:8434600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a33, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a34, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a34, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08434800
  set TERM
  ph data[0]=0:8434800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a34, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a35, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a35, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08434a00
  set TERM
  ph data[0]=0:8434a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a35, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a36, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a36, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08434c00
  set TERM
  ph data[0]=0:8434c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a36, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a37, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a37, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08434e00
  set TERM
  ph data[0]=0:8434e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a37, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a38, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a38, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08435000
  set TERM
  ph data[0]=0:8435000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a38, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a39, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a39, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08435200
  set TERM
  ph data[0]=0:8435200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a39, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a3a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a3a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08435400
  set TERM
  ph data[0]=0:8435400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a3a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a3b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a3b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08435600
  set TERM
  ph data[0]=0:8435600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a3b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a3c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a3c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08435800
  set TERM
  ph data[0]=0:8435800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a3c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a3d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a3d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08435a00
  set TERM
  ph data[0]=0:8435a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a3d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a3e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a3e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08435c00
  set TERM
  ph data[0]=0:8435c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a3e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a3f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08435e00
  set TERM
  ph data[0]=0:8435e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a3f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a40, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a40, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08436000
  set TERM
  ph data[0]=0:8436000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a40, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a41, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a41, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08436200
  set TERM
  ph data[0]=0:8436200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a41, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a42, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a42, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08436400
  set TERM
  ph data[0]=0:8436400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a42, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a43, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a43, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08436600
  set TERM
  ph data[0]=0:8436600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a43, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a44, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a44, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08436800
  set TERM
  ph data[0]=0:8436800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a44, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a45, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a45, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08436a00
  set TERM
  ph data[0]=0:8436a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a45, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a46, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a46, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08436c00
  set TERM
  ph data[0]=0:8436c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a46, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a47, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a47, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08436e00
  set TERM
  ph data[0]=0:8436e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a47, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a48, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a48, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08437000
  set TERM
  ph data[0]=0:8437000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a48, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a49, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a49, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08437200
  set TERM
  ph data[0]=0:8437200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a49, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a4a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a4a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08437400
  set TERM
  ph data[0]=0:8437400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a4a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a4b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a4b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08437600
  set TERM
  ph data[0]=0:8437600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a4b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a4c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a4c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08437800
  set TERM
  ph data[0]=0:8437800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a4c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a4d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a4d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08437a00
  set TERM
  ph data[0]=0:8437a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a4d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a4e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a4e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08437c00
  set TERM
  ph data[0]=0:8437c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a4e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a4f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a4f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08437e00
  set TERM
  ph data[0]=0:8437e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a4f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a50, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a50, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08438000
  set TERM
  ph data[0]=0:8438000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a50, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a51, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a51, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08438200
  set TERM
  ph data[0]=0:8438200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a51, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a52, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a52, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08438400
  set TERM
  ph data[0]=0:8438400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a52, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a53, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a53, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08438600
  set TERM
  ph data[0]=0:8438600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a53, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a54, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a54, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08438800
  set TERM
  ph data[0]=0:8438800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a54, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a55, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a55, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08438a00
  set TERM
  ph data[0]=0:8438a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a55, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a56, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a56, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08438c00
  set TERM
  ph data[0]=0:8438c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a56, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a57, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a57, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08438e00
  set TERM
  ph data[0]=0:8438e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a57, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a58, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a58, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08439000
  set TERM
  ph data[0]=0:8439000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a58, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a59, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a59, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08439200
  set TERM
  ph data[0]=0:8439200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a59, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a5a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a5a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08439400
  set TERM
  ph data[0]=0:8439400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a5a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a5b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a5b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08439600
  set TERM
  ph data[0]=0:8439600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a5b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a5c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a5c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08439800
  set TERM
  ph data[0]=0:8439800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a5c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a5d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a5d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08439a00
  set TERM
  ph data[0]=0:8439a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a5d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a5e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a5e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08439c00
  set TERM
  ph data[0]=0:8439c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a5e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a5f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a5f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08439e00
  set TERM
  ph data[0]=0:8439e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a5f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a60, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a60, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0843a000
  set TERM
  ph data[0]=0:843a000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a60, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a61, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a61, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0843a200
  set TERM
  ph data[0]=0:843a200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a61, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a62, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a62, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0843a400
  set TERM
  ph data[0]=0:843a400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a62, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a63, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a63, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0843a600
  set TERM
  ph data[0]=0:843a600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a63, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a64, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a64, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0843a800
  set TERM
  ph data[0]=0:843a800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a64, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a65, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a65, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0843aa00
  set TERM
  ph data[0]=0:843aa00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a65, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a66, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a66, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0843ac00
  set TERM
  ph data[0]=0:843ac00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a66, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a67, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a67, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0843ae00
  set TERM
  ph data[0]=0:843ae00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a67, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a68, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a68, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0843b000
  set TERM
  ph data[0]=0:843b000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a68, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a69, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a69, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0843b200
  set TERM
  ph data[0]=0:843b200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a69, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a6a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a6a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0843b400
  set TERM
  ph data[0]=0:843b400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a6a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a6b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a6b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0843b600
  set TERM
  ph data[0]=0:843b600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a6b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a6c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a6c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0843b800
  set TERM
  ph data[0]=0:843b800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a6c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a6d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a6d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0843ba00
  set TERM
  ph data[0]=0:843ba00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a6d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a6e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a6e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0843bc00
  set TERM
  ph data[0]=0:843bc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a6e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a6f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a6f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0843be00
  set TERM
  ph data[0]=0:843be00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a6f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a70, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a70, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0843c000
  set TERM
  ph data[0]=0:843c000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a70, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a71, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a71, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0843c200
  set TERM
  ph data[0]=0:843c200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a71, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a72, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a72, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0843c400
  set TERM
  ph data[0]=0:843c400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a72, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a73, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a73, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0843c600
  set TERM
  ph data[0]=0:843c600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a73, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a74, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a74, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0843c800
  set TERM
  ph data[0]=0:843c800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a74, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a75, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a75, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0843ca00
  set TERM
  ph data[0]=0:843ca00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a75, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a76, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a76, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0843cc00
  set TERM
  ph data[0]=0:843cc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a76, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a77, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a77, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0843ce00
  set TERM
  ph data[0]=0:843ce00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a77, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a78, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a78, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0843d000
  set TERM
  ph data[0]=0:843d000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a78, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a79, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a79, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0843d200
  set TERM
  ph data[0]=0:843d200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a79, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a7a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a7a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0843d400
  set TERM
  ph data[0]=0:843d400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a7a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a7b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a7b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0843d600
  set TERM
  ph data[0]=0:843d600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a7b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710a7c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710a7c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0843d800
  set TERM
  ph data[0]=0:843d800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710a7c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0xAtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d26, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d26, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08492c00
  set TERM
  ph data[0]=0:8492c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d26, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d27, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d27, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08492e00
  set TERM
  ph data[0]=0:8492e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d27, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d28, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d28, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08493000
  set TERM
  ph data[0]=0:8493000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d28, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d29, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d29, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08493200
  set TERM
  ph data[0]=0:8493200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d29, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d2a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d2a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08493400
  set TERM
  ph data[0]=0:8493400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d2a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d2b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d2b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08493600
  set TERM
  ph data[0]=0:8493600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d2b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d2c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d2c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08493800
  set TERM
  ph data[0]=0:8493800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d2c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d2d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d2d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08493a00
  set TERM
  ph data[0]=0:8493a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d2d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d2e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d2e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08493c00
  set TERM
  ph data[0]=0:8493c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d2e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d2f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d2f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08493e00
  set TERM
  ph data[0]=0:8493e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d2f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d30, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d30, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08494000
  set TERM
  ph data[0]=0:8494000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d30, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d31, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d31, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08494200
  set TERM
  ph data[0]=0:8494200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d31, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d32, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d32, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08494400
  set TERM
  ph data[0]=0:8494400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d32, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d33, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d33, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08494600
  set TERM
  ph data[0]=0:8494600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d33, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d34, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d34, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08494800
  set TERM
  ph data[0]=0:8494800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d34, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d35, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d35, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08494a00
  set TERM
  ph data[0]=0:8494a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d35, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d36, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d36, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08494c00
  set TERM
  ph data[0]=0:8494c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d36, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d37, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d37, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08494e00
  set TERM
  ph data[0]=0:8494e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d37, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d38, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d38, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08495000
  set TERM
  ph data[0]=0:8495000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d38, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d39, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d39, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08495200
  set TERM
  ph data[0]=0:8495200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d39, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d3a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d3a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08495400
  set TERM
  ph data[0]=0:8495400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d3a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d3b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d3b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08495600
  set TERM
  ph data[0]=0:8495600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d3b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d3c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d3c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08495800
  set TERM
  ph data[0]=0:8495800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d3c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d3d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d3d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08495a00
  set TERM
  ph data[0]=0:8495a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d3d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d3e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d3e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08495c00
  set TERM
  ph data[0]=0:8495c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d3e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d3f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08495e00
  set TERM
  ph data[0]=0:8495e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d3f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d40, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d40, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08496000
  set TERM
  ph data[0]=0:8496000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d40, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d41, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d41, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08496200
  set TERM
  ph data[0]=0:8496200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d41, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d42, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d42, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08496400
  set TERM
  ph data[0]=0:8496400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d42, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d43, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d43, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08496600
  set TERM
  ph data[0]=0:8496600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d43, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d44, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d44, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08496800
  set TERM
  ph data[0]=0:8496800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d44, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d45, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d45, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08496a00
  set TERM
  ph data[0]=0:8496a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d45, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d46, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d46, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08496c00
  set TERM
  ph data[0]=0:8496c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d46, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d47, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d47, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08496e00
  set TERM
  ph data[0]=0:8496e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d47, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d48, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d48, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08497000
  set TERM
  ph data[0]=0:8497000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d48, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d49, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d49, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08497200
  set TERM
  ph data[0]=0:8497200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d49, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d4a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d4a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08497400
  set TERM
  ph data[0]=0:8497400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d4a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d4b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d4b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08497600
  set TERM
  ph data[0]=0:8497600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d4b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d4c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d4c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08497800
  set TERM
  ph data[0]=0:8497800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d4c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d4d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d4d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08497a00
  set TERM
  ph data[0]=0:8497a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d4d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d4e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d4e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08497c00
  set TERM
  ph data[0]=0:8497c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d4e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d4f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d4f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08497e00
  set TERM
  ph data[0]=0:8497e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d4f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d50, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d50, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08498000
  set TERM
  ph data[0]=0:8498000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d50, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d51, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d51, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08498200
  set TERM
  ph data[0]=0:8498200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d51, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d52, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d52, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08498400
  set TERM
  ph data[0]=0:8498400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d52, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d53, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d53, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08498600
  set TERM
  ph data[0]=0:8498600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d53, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d54, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d54, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08498800
  set TERM
  ph data[0]=0:8498800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d54, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d55, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d55, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08498a00
  set TERM
  ph data[0]=0:8498a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d55, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d56, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d56, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08498c00
  set TERM
  ph data[0]=0:8498c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d56, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d57, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d57, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08498e00
  set TERM
  ph data[0]=0:8498e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d57, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d58, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d58, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08499000
  set TERM
  ph data[0]=0:8499000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d58, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d59, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d59, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08499200
  set TERM
  ph data[0]=0:8499200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d59, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d5a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d5a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08499400
  set TERM
  ph data[0]=0:8499400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d5a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d5b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d5b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08499600
  set TERM
  ph data[0]=0:8499600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d5b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d5c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d5c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08499800
  set TERM
  ph data[0]=0:8499800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d5c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d5d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d5d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08499a00
  set TERM
  ph data[0]=0:8499a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d5d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d5e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d5e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08499c00
  set TERM
  ph data[0]=0:8499c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d5e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d5f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d5f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08499e00
  set TERM
  ph data[0]=0:8499e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d5f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d60, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d60, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0849a000
  set TERM
  ph data[0]=0:849a000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d60, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d61, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d61, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0849a200
  set TERM
  ph data[0]=0:849a200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d61, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d62, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d62, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0849a400
  set TERM
  ph data[0]=0:849a400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d62, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d63, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d63, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0849a600
  set TERM
  ph data[0]=0:849a600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d63, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d64, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d64, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0849a800
  set TERM
  ph data[0]=0:849a800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d64, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d65, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d65, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0849aa00
  set TERM
  ph data[0]=0:849aa00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d65, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d66, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d66, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0849ac00
  set TERM
  ph data[0]=0:849ac00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d66, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d67, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d67, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0849ae00
  set TERM
  ph data[0]=0:849ae00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d67, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d68, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d68, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0849b000
  set TERM
  ph data[0]=0:849b000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d68, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d69, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d69, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0849b200
  set TERM
  ph data[0]=0:849b200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d69, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d6a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d6a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0849b400
  set TERM
  ph data[0]=0:849b400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d6a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d6b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d6b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0849b600
  set TERM
  ph data[0]=0:849b600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d6b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d6c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d6c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0849b800
  set TERM
  ph data[0]=0:849b800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d6c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d6d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d6d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0849ba00
  set TERM
  ph data[0]=0:849ba00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d6d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d6e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d6e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0849bc00
  set TERM
  ph data[0]=0:849bc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d6e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d6f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d6f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0849be00
  set TERM
  ph data[0]=0:849be00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d6f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d70, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d70, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0849c000
  set TERM
  ph data[0]=0:849c000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d70, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d71, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d71, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0849c200
  set TERM
  ph data[0]=0:849c200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d71, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d72, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d72, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0849c400
  set TERM
  ph data[0]=0:849c400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d72, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d73, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d73, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0849c600
  set TERM
  ph data[0]=0:849c600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d73, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d74, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d74, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0849c800
  set TERM
  ph data[0]=0:849c800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d74, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d75, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d75, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0849ca00
  set TERM
  ph data[0]=0:849ca00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d75, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d76, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d76, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0849cc00
  set TERM
  ph data[0]=0:849cc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d76, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d77, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d77, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0849ce00
  set TERM
  ph data[0]=0:849ce00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d77, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d78, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d78, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0849d000
  set TERM
  ph data[0]=0:849d000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d78, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d79, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d79, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0849d200
  set TERM
  ph data[0]=0:849d200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d79, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d7a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d7a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0849d400
  set TERM
  ph data[0]=0:849d400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d7a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d7b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d7b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0849d600
  set TERM
  ph data[0]=0:849d600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d7b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d7c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d7c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0849d800
  set TERM
  ph data[0]=0:849d800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d7c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d7d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d7d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0849da00
  set TERM
  ph data[0]=0:849da00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d7d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d7e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d7e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0849dc00
  set TERM
  ph data[0]=0:849dc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d7e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d7f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d7f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0849de00
  set TERM
  ph data[0]=0:849de00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d7f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d80, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d80, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0849e000
  set TERM
  ph data[0]=0:849e000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d80, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d81, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d81, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0849e200
  set TERM
  ph data[0]=0:849e200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d81, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d82, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d82, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0849e400
  set TERM
  ph data[0]=0:849e400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d82, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d83, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d83, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0849e600
  set TERM
  ph data[0]=0:849e600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d83, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d84, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d84, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0849e800
  set TERM
  ph data[0]=0:849e800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d84, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d85, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d85, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0849ea00
  set TERM
  ph data[0]=0:849ea00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d85, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d86, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d86, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0849ec00
  set TERM
  ph data[0]=0:849ec00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d86, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d87, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d87, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0849ee00
  set TERM
  ph data[0]=0:849ee00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d87, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d88, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d88, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0849f000
  set TERM
  ph data[0]=0:849f000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d88, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d89, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d89, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0849f200
  set TERM
  ph data[0]=0:849f200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d89, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d8a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d8a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0849f400
  set TERM
  ph data[0]=0:849f400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d8a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d8b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d8b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0849f600
  set TERM
  ph data[0]=0:849f600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d8b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d8c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d8c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0849f800
  set TERM
  ph data[0]=0:849f800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d8c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d8d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d8d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0849fa00
  set TERM
  ph data[0]=0:849fa00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d8d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d8e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d8e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0849fc00
  set TERM
  ph data[0]=0:849fc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d8e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d8f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d8f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0849fe00
  set TERM
  ph data[0]=0:849fe00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d8f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d90, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d90, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:084a0000
  set TERM
  ph data[0]=0:84a0000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d90, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d91, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d91, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:084a0200
  set TERM
  ph data[0]=0:84a0200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d91, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d92, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d92, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:084a0400
  set TERM
  ph data[0]=0:84a0400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d92, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d93, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d93, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:084a0600
  set TERM
  ph data[0]=0:84a0600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d93, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d94, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d94, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:084a0800
  set TERM
  ph data[0]=0:84a0800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d94, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d95, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d95, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:084a0a00
  set TERM
  ph data[0]=0:84a0a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d95, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d96, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d96, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:084a0c00
  set TERM
  ph data[0]=0:84a0c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d96, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d97, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d97, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:084a0e00
  set TERM
  ph data[0]=0:84a0e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d97, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d98, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d98, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:084a1000
  set TERM
  ph data[0]=0:84a1000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d98, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d99, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d99, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:084a1200
  set TERM
  ph data[0]=0:84a1200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d99, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d9a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d9a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:084a1400
  set TERM
  ph data[0]=0:84a1400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d9a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d9b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d9b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:084a1600
  set TERM
  ph data[0]=0:84a1600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d9b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d9c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d9c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:084a1800
  set TERM
  ph data[0]=0:84a1800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d9c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d9d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d9d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:084a1a00
  set TERM
  ph data[0]=0:84a1a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d9d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d9e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d9e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:084a1c00
  set TERM
  ph data[0]=0:84a1c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d9e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710d9f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710d9f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:084a1e00
  set TERM
  ph data[0]=0:84a1e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710d9f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710da0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710da0, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:084a2000
  set TERM
  ph data[0]=0:84a2000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710da0, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710da1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710da1, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:084a2200
  set TERM
  ph data[0]=0:84a2200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710da1, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710da2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710da2, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:084a2400
  set TERM
  ph data[0]=0:84a2400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710da2, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710da3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710da3, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:084a2600
  set TERM
  ph data[0]=0:84a2600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710da3, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710da4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710da4, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:084a2800
  set TERM
  ph data[0]=0:84a2800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710da4, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710da5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710da5, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:084a2a00
  set TERM
  ph data[0]=0:84a2a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710da5, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710da6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710da6, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:084a2c00
  set TERM
  ph data[0]=0:84a2c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710da6, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710da7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710da7, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:084a2e00
  set TERM
  ph data[0]=0:84a2e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710da7, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710da8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710da8, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:084a3000
  set TERM
  ph data[0]=0:84a3000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710da8, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710da9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710da9, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:084a3200
  set TERM
  ph data[0]=0:84a3200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710da9, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710daa, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710daa, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:084a3400
  set TERM
  ph data[0]=0:84a3400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710daa, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710dab, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710dab, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:084a3600
  set TERM
  ph data[0]=0:84a3600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710dab, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710dac, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710dac, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:084a3800
  set TERM
  ph data[0]=0:84a3800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710dac, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 710dad, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 710dad, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:084a3a00
  set TERM
  ph data[0]=0:84a3a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x710dad, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0xAtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711390, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711390, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08560000
  set TERM
  ph data[0]=0:8560000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711390, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711391, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711391, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08560200
  set TERM
  ph data[0]=0:8560200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711391, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711392, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711392, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08560400
  set TERM
  ph data[0]=0:8560400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711392, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711393, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711393, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08560600
  set TERM
  ph data[0]=0:8560600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711393, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711394, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711394, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08560800
  set TERM
  ph data[0]=0:8560800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711394, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711395, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711395, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08560a00
  set TERM
  ph data[0]=0:8560a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711395, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711396, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711396, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08560c00
  set TERM
  ph data[0]=0:8560c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711396, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711397, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711397, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08560e00
  set TERM
  ph data[0]=0:8560e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711397, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711398, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711398, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08561000
  set TERM
  ph data[0]=0:8561000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711398, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711399, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711399, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08561200
  set TERM
  ph data[0]=0:8561200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711399, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71139a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71139a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08561400
  set TERM
  ph data[0]=0:8561400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71139a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71139b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71139b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08561600
  set TERM
  ph data[0]=0:8561600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71139b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71139c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71139c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08561800
  set TERM
  ph data[0]=0:8561800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71139c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71139d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71139d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08561a00
  set TERM
  ph data[0]=0:8561a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71139d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71139e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71139e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08561c00
  set TERM
  ph data[0]=0:8561c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71139e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71139f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71139f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08561e00
  set TERM
  ph data[0]=0:8561e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71139f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113a0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113a0, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08562000
  set TERM
  ph data[0]=0:8562000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113a0, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113a1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113a1, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08562200
  set TERM
  ph data[0]=0:8562200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113a1, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113a2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113a2, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08562400
  set TERM
  ph data[0]=0:8562400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113a2, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113a3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113a3, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08562600
  set TERM
  ph data[0]=0:8562600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113a3, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113a4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113a4, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08562800
  set TERM
  ph data[0]=0:8562800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113a4, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113a5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113a5, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08562a00
  set TERM
  ph data[0]=0:8562a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113a5, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113a6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113a6, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08562c00
  set TERM
  ph data[0]=0:8562c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113a6, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113a7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113a7, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08562e00
  set TERM
  ph data[0]=0:8562e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113a7, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113a8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113a8, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08563000
  set TERM
  ph data[0]=0:8563000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113a8, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113a9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113a9, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08563200
  set TERM
  ph data[0]=0:8563200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113a9, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113aa, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113aa, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08563400
  set TERM
  ph data[0]=0:8563400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113aa, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113ab, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113ab, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08563600
  set TERM
  ph data[0]=0:8563600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113ab, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113ac, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113ac, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08563800
  set TERM
  ph data[0]=0:8563800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113ac, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113ad, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113ad, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08563a00
  set TERM
  ph data[0]=0:8563a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113ad, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113ae, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113ae, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08563c00
  set TERM
  ph data[0]=0:8563c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113ae, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113af, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113af, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08563e00
  set TERM
  ph data[0]=0:8563e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113af, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113b0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113b0, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08564000
  set TERM
  ph data[0]=0:8564000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113b0, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113b1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113b1, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08564200
  set TERM
  ph data[0]=0:8564200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113b1, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113b2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113b2, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08564400
  set TERM
  ph data[0]=0:8564400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113b2, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113b3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113b3, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08564600
  set TERM
  ph data[0]=0:8564600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113b3, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113b4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113b4, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08564800
  set TERM
  ph data[0]=0:8564800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113b4, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113b5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113b5, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08564a00
  set TERM
  ph data[0]=0:8564a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113b5, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113b6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113b6, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08564c00
  set TERM
  ph data[0]=0:8564c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113b6, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113b7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113b7, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08564e00
  set TERM
  ph data[0]=0:8564e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113b7, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113b8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113b8, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08565000
  set TERM
  ph data[0]=0:8565000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113b8, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113b9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113b9, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08565200
  set TERM
  ph data[0]=0:8565200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113b9, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113ba, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113ba, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08565400
  set TERM
  ph data[0]=0:8565400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113ba, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113bb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113bb, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08565600
  set TERM
  ph data[0]=0:8565600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113bb, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113bc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113bc, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08565800
  set TERM
  ph data[0]=0:8565800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113bc, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113bd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113bd, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08565a00
  set TERM
  ph data[0]=0:8565a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113bd, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113be, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113be, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08565c00
  set TERM
  ph data[0]=0:8565c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113be, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113bf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113bf, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08565e00
  set TERM
  ph data[0]=0:8565e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113bf, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113c0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113c0, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08566000
  set TERM
  ph data[0]=0:8566000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113c0, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113c1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113c1, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08566200
  set TERM
  ph data[0]=0:8566200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113c1, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113c2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113c2, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08566400
  set TERM
  ph data[0]=0:8566400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113c2, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113c3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113c3, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08566600
  set TERM
  ph data[0]=0:8566600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113c3, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113c4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113c4, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08566800
  set TERM
  ph data[0]=0:8566800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113c4, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113c5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113c5, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08566a00
  set TERM
  ph data[0]=0:8566a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113c5, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113c6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113c6, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08566c00
  set TERM
  ph data[0]=0:8566c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113c6, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113c7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113c7, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08566e00
  set TERM
  ph data[0]=0:8566e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113c7, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113c8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113c8, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08567000
  set TERM
  ph data[0]=0:8567000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113c8, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113c9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113c9, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08567200
  set TERM
  ph data[0]=0:8567200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113c9, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113ca, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113ca, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08567400
  set TERM
  ph data[0]=0:8567400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113ca, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113cb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113cb, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08567600
  set TERM
  ph data[0]=0:8567600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113cb, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113cc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113cc, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08567800
  set TERM
  ph data[0]=0:8567800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113cc, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113cd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113cd, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08567a00
  set TERM
  ph data[0]=0:8567a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113cd, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113ce, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113ce, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08567c00
  set TERM
  ph data[0]=0:8567c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113ce, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113cf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113cf, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08567e00
  set TERM
  ph data[0]=0:8567e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113cf, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113d0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113d0, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08568000
  set TERM
  ph data[0]=0:8568000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113d0, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113d1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113d1, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08568200
  set TERM
  ph data[0]=0:8568200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113d1, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113d2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113d2, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08568400
  set TERM
  ph data[0]=0:8568400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113d2, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113d3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113d3, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08568600
  set TERM
  ph data[0]=0:8568600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113d3, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113d4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113d4, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08568800
  set TERM
  ph data[0]=0:8568800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113d4, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113d5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113d5, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08568a00
  set TERM
  ph data[0]=0:8568a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113d5, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113d6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113d6, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08568c00
  set TERM
  ph data[0]=0:8568c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113d6, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113d7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113d7, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08568e00
  set TERM
  ph data[0]=0:8568e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113d7, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113d8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113d8, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08569000
  set TERM
  ph data[0]=0:8569000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113d8, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113d9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113d9, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08569200
  set TERM
  ph data[0]=0:8569200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113d9, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113da, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113da, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08569400
  set TERM
  ph data[0]=0:8569400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113da, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113db, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113db, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08569600
  set TERM
  ph data[0]=0:8569600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113db, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113dc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113dc, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08569800
  set TERM
  ph data[0]=0:8569800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113dc, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113dd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113dd, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08569a00
  set TERM
  ph data[0]=0:8569a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113dd, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113de, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113de, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08569c00
  set TERM
  ph data[0]=0:8569c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113de, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113df, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113df, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08569e00
  set TERM
  ph data[0]=0:8569e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113df, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113e0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113e0, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0856a000
  set TERM
  ph data[0]=0:856a000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113e0, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113e1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113e1, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0856a200
  set TERM
  ph data[0]=0:856a200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113e1, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113e2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113e2, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0856a400
  set TERM
  ph data[0]=0:856a400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113e2, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113e3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113e3, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0856a600
  set TERM
  ph data[0]=0:856a600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113e3, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113e4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113e4, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0856a800
  set TERM
  ph data[0]=0:856a800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113e4, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113e5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113e5, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0856aa00
  set TERM
  ph data[0]=0:856aa00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113e5, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113e6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113e6, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0856ac00
  set TERM
  ph data[0]=0:856ac00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113e6, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113e7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113e7, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0856ae00
  set TERM
  ph data[0]=0:856ae00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113e7, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113e8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113e8, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0856b000
  set TERM
  ph data[0]=0:856b000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113e8, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113e9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113e9, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0856b200
  set TERM
  ph data[0]=0:856b200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113e9, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113ea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113ea, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0856b400
  set TERM
  ph data[0]=0:856b400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113ea, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113eb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113eb, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0856b600
  set TERM
  ph data[0]=0:856b600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113eb, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113ec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113ec, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0856b800
  set TERM
  ph data[0]=0:856b800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113ec, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113ed, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113ed, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0856ba00
  set TERM
  ph data[0]=0:856ba00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113ed, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113ee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113ee, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0856bc00
  set TERM
  ph data[0]=0:856bc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113ee, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113ef, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113ef, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0856be00
  set TERM
  ph data[0]=0:856be00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113ef, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113f0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113f0, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0856c000
  set TERM
  ph data[0]=0:856c000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113f0, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113f1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113f1, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0856c200
  set TERM
  ph data[0]=0:856c200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113f1, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113f2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113f2, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0856c400
  set TERM
  ph data[0]=0:856c400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113f2, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113f3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113f3, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0856c600
  set TERM
  ph data[0]=0:856c600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113f3, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113f4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113f4, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0856c800
  set TERM
  ph data[0]=0:856c800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113f4, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113f5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113f5, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0856ca00
  set TERM
  ph data[0]=0:856ca00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113f5, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113f6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113f6, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0856cc00
  set TERM
  ph data[0]=0:856cc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113f6, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113f7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113f7, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0856ce00
  set TERM
  ph data[0]=0:856ce00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113f7, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113f8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113f8, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0856d000
  set TERM
  ph data[0]=0:856d000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113f8, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113f9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113f9, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0856d200
  set TERM
  ph data[0]=0:856d200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113f9, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113fa, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113fa, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0856d400
  set TERM
  ph data[0]=0:856d400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113fa, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113fb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113fb, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0856d600
  set TERM
  ph data[0]=0:856d600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113fb, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113fc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113fc, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0856d800
  set TERM
  ph data[0]=0:856d800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113fc, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113fd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113fd, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0856da00
  set TERM
  ph data[0]=0:856da00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113fd, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113fe, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113fe, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0856dc00
  set TERM
  ph data[0]=0:856dc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113fe, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7113ff, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7113ff, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0856de00
  set TERM
  ph data[0]=0:856de00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7113ff, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711400, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711400, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0856e000
  set TERM
  ph data[0]=0:856e000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711400, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711401, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711401, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0856e200
  set TERM
  ph data[0]=0:856e200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711401, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711402, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711402, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0856e400
  set TERM
  ph data[0]=0:856e400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711402, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711403, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711403, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0856e600
  set TERM
  ph data[0]=0:856e600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711403, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711404, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711404, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0856e800
  set TERM
  ph data[0]=0:856e800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711404, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711405, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711405, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0856ea00
  set TERM
  ph data[0]=0:856ea00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711405, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711406, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711406, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0856ec00
  set TERM
  ph data[0]=0:856ec00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711406, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711407, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711407, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0856ee00
  set TERM
  ph data[0]=0:856ee00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711407, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711408, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711408, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0856f000
  set TERM
  ph data[0]=0:856f000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711408, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711409, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711409, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0856f200
  set TERM
  ph data[0]=0:856f200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711409, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71140a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71140a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0856f400
  set TERM
  ph data[0]=0:856f400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71140a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71140b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71140b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0856f600
  set TERM
  ph data[0]=0:856f600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71140b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71140c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71140c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0856f800
  set TERM
  ph data[0]=0:856f800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71140c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71140d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71140d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0856fa00
  set TERM
  ph data[0]=0:856fa00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71140d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71140e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71140e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0856fc00
  set TERM
  ph data[0]=0:856fc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71140e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71140f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71140f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0856fe00
  set TERM
  ph data[0]=0:856fe00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71140f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711410, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711410, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08570000
  set TERM
  ph data[0]=0:8570000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711410, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711411, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711411, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08570200
  set TERM
  ph data[0]=0:8570200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711411, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711412, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711412, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08570400
  set TERM
  ph data[0]=0:8570400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711412, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711413, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711413, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08570600
  set TERM
  ph data[0]=0:8570600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711413, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711414, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711414, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08570800
  set TERM
  ph data[0]=0:8570800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711414, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711415, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711415, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08570a00
  set TERM
  ph data[0]=0:8570a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711415, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711416, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711416, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08570c00
  set TERM
  ph data[0]=0:8570c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711416, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711417, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711417, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08570e00
  set TERM
  ph data[0]=0:8570e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711417, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0xAtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71173f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71173f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:085d5e00
  set TERM
  ph data[0]=0:85d5e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71173f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711740, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711740, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:085d6000
  set TERM
  ph data[0]=0:85d6000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711740, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711741, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711741, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:085d6200
  set TERM
  ph data[0]=0:85d6200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711741, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711742, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711742, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:085d6400
  set TERM
  ph data[0]=0:85d6400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711742, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711743, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711743, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:085d6600
  set TERM
  ph data[0]=0:85d6600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711743, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711744, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711744, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:085d6800
  set TERM
  ph data[0]=0:85d6800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711744, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711745, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711745, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:085d6a00
  set TERM
  ph data[0]=0:85d6a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711745, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711746, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711746, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:085d6c00
  set TERM
  ph data[0]=0:85d6c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711746, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711747, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711747, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:085d6e00
  set TERM
  ph data[0]=0:85d6e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711747, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711748, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711748, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:085d7000
  set TERM
  ph data[0]=0:85d7000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711748, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711749, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711749, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:085d7200
  set TERM
  ph data[0]=0:85d7200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711749, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71174a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71174a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:085d7400
  set TERM
  ph data[0]=0:85d7400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71174a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71174b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71174b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:085d7600
  set TERM
  ph data[0]=0:85d7600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71174b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71174c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71174c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:085d7800
  set TERM
  ph data[0]=0:85d7800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71174c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71174d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71174d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:085d7a00
  set TERM
  ph data[0]=0:85d7a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71174d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71174e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71174e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:085d7c00
  set TERM
  ph data[0]=0:85d7c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71174e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71174f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71174f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:085d7e00
  set TERM
  ph data[0]=0:85d7e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71174f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711750, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711750, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:085d8000
  set TERM
  ph data[0]=0:85d8000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711750, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711751, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711751, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:085d8200
  set TERM
  ph data[0]=0:85d8200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711751, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711752, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711752, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:085d8400
  set TERM
  ph data[0]=0:85d8400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711752, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711753, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711753, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:085d8600
  set TERM
  ph data[0]=0:85d8600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711753, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711754, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711754, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:085d8800
  set TERM
  ph data[0]=0:85d8800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711754, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711755, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711755, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:085d8a00
  set TERM
  ph data[0]=0:85d8a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711755, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711756, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711756, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:085d8c00
  set TERM
  ph data[0]=0:85d8c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711756, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711757, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711757, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:085d8e00
  set TERM
  ph data[0]=0:85d8e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711757, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711758, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711758, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:085d9000
  set TERM
  ph data[0]=0:85d9000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711758, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711759, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711759, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:085d9200
  set TERM
  ph data[0]=0:85d9200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711759, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71175a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71175a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:085d9400
  set TERM
  ph data[0]=0:85d9400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71175a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71175b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71175b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:085d9600
  set TERM
  ph data[0]=0:85d9600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71175b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71175c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71175c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:085d9800
  set TERM
  ph data[0]=0:85d9800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71175c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71175d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71175d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:085d9a00
  set TERM
  ph data[0]=0:85d9a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71175d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71175e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71175e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:085d9c00
  set TERM
  ph data[0]=0:85d9c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71175e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71175f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71175f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:085d9e00
  set TERM
  ph data[0]=0:85d9e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71175f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711760, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711760, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:085da000
  set TERM
  ph data[0]=0:85da000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711760, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711761, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711761, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:085da200
  set TERM
  ph data[0]=0:85da200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711761, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711762, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711762, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:085da400
  set TERM
  ph data[0]=0:85da400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711762, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711763, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711763, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:085da600
  set TERM
  ph data[0]=0:85da600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711763, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711764, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711764, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:085da800
  set TERM
  ph data[0]=0:85da800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711764, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711765, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711765, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:085daa00
  set TERM
  ph data[0]=0:85daa00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711765, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711766, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711766, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:085dac00
  set TERM
  ph data[0]=0:85dac00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711766, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711767, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711767, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:085dae00
  set TERM
  ph data[0]=0:85dae00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711767, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711768, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711768, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:085db000
  set TERM
  ph data[0]=0:85db000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711768, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711769, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711769, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:085db200
  set TERM
  ph data[0]=0:85db200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711769, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71176a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71176a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:085db400
  set TERM
  ph data[0]=0:85db400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71176a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71176b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71176b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:085db600
  set TERM
  ph data[0]=0:85db600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71176b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71176c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71176c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:085db800
  set TERM
  ph data[0]=0:85db800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71176c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71176d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71176d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:085dba00
  set TERM
  ph data[0]=0:85dba00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71176d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71176e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71176e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:085dbc00
  set TERM
  ph data[0]=0:85dbc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71176e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71176f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71176f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:085dbe00
  set TERM
  ph data[0]=0:85dbe00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71176f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711770, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711770, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:085dc000
  set TERM
  ph data[0]=0:85dc000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711770, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711771, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711771, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:085dc200
  set TERM
  ph data[0]=0:85dc200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711771, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711772, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711772, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:085dc400
  set TERM
  ph data[0]=0:85dc400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711772, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711773, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711773, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:085dc600
  set TERM
  ph data[0]=0:85dc600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711773, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711774, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711774, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:085dc800
  set TERM
  ph data[0]=0:85dc800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711774, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711775, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711775, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:085dca00
  set TERM
  ph data[0]=0:85dca00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711775, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711776, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711776, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:085dcc00
  set TERM
  ph data[0]=0:85dcc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711776, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711777, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711777, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:085dce00
  set TERM
  ph data[0]=0:85dce00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711777, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711778, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711778, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:085dd000
  set TERM
  ph data[0]=0:85dd000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711778, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711779, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711779, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:085dd200
  set TERM
  ph data[0]=0:85dd200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711779, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71177a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71177a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:085dd400
  set TERM
  ph data[0]=0:85dd400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71177a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71177b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71177b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:085dd600
  set TERM
  ph data[0]=0:85dd600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71177b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71177c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71177c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:085dd800
  set TERM
  ph data[0]=0:85dd800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71177c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71177d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71177d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:085dda00
  set TERM
  ph data[0]=0:85dda00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71177d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71177e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71177e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:085ddc00
  set TERM
  ph data[0]=0:85ddc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71177e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71177f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71177f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:085dde00
  set TERM
  ph data[0]=0:85dde00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71177f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711780, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711780, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:085de000
  set TERM
  ph data[0]=0:85de000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711780, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711781, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711781, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:085de200
  set TERM
  ph data[0]=0:85de200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711781, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711782, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711782, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:085de400
  set TERM
  ph data[0]=0:85de400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711782, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711783, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711783, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:085de600
  set TERM
  ph data[0]=0:85de600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711783, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711784, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711784, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:085de800
  set TERM
  ph data[0]=0:85de800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711784, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711785, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711785, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:085dea00
  set TERM
  ph data[0]=0:85dea00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711785, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711786, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711786, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:085dec00
  set TERM
  ph data[0]=0:85dec00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711786, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711787, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711787, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:085dee00
  set TERM
  ph data[0]=0:85dee00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711787, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711788, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711788, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:085df000
  set TERM
  ph data[0]=0:85df000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711788, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711789, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711789, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:085df200
  set TERM
  ph data[0]=0:85df200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711789, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71178a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71178a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:085df400
  set TERM
  ph data[0]=0:85df400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71178a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71178b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71178b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:085df600
  set TERM
  ph data[0]=0:85df600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71178b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71178c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71178c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:085df800
  set TERM
  ph data[0]=0:85df800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71178c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71178d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71178d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:085dfa00
  set TERM
  ph data[0]=0:85dfa00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71178d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71178e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71178e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:085dfc00
  set TERM
  ph data[0]=0:85dfc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71178e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71178f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71178f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:085dfe00
  set TERM
  ph data[0]=0:85dfe00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71178f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711790, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711790, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:085e0000
  set TERM
  ph data[0]=0:85e0000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711790, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711791, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711791, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:085e0200
  set TERM
  ph data[0]=0:85e0200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711791, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711792, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711792, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:085e0400
  set TERM
  ph data[0]=0:85e0400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711792, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711793, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711793, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:085e0600
  set TERM
  ph data[0]=0:85e0600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711793, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711794, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711794, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:085e0800
  set TERM
  ph data[0]=0:85e0800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711794, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711795, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711795, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:085e0a00
  set TERM
  ph data[0]=0:85e0a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711795, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711796, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711796, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:085e0c00
  set TERM
  ph data[0]=0:85e0c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711796, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711797, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711797, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:085e0e00
  set TERM
  ph data[0]=0:85e0e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711797, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711798, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711798, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:085e1000
  set TERM
  ph data[0]=0:85e1000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711798, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711799, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711799, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:085e1200
  set TERM
  ph data[0]=0:85e1200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711799, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71179a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71179a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:085e1400
  set TERM
  ph data[0]=0:85e1400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71179a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71179b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71179b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:085e1600
  set TERM
  ph data[0]=0:85e1600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71179b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71179c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71179c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:085e1800
  set TERM
  ph data[0]=0:85e1800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71179c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71179d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71179d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:085e1a00
  set TERM
  ph data[0]=0:85e1a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71179d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71179e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71179e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:085e1c00
  set TERM
  ph data[0]=0:85e1c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71179e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71179f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71179f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:085e1e00
  set TERM
  ph data[0]=0:85e1e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71179f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117a0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117a0, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:085e2000
  set TERM
  ph data[0]=0:85e2000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117a0, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117a1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117a1, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:085e2200
  set TERM
  ph data[0]=0:85e2200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117a1, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117a2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117a2, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:085e2400
  set TERM
  ph data[0]=0:85e2400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117a2, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117a3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117a3, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:085e2600
  set TERM
  ph data[0]=0:85e2600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117a3, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117a4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117a4, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:085e2800
  set TERM
  ph data[0]=0:85e2800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117a4, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117a5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117a5, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:085e2a00
  set TERM
  ph data[0]=0:85e2a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117a5, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117a6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117a6, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:085e2c00
  set TERM
  ph data[0]=0:85e2c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117a6, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117a7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117a7, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:085e2e00
  set TERM
  ph data[0]=0:85e2e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117a7, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117a8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117a8, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:085e3000
  set TERM
  ph data[0]=0:85e3000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117a8, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117a9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117a9, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:085e3200
  set TERM
  ph data[0]=0:85e3200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117a9, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117aa, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117aa, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:085e3400
  set TERM
  ph data[0]=0:85e3400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117aa, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117ab, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117ab, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:085e3600
  set TERM
  ph data[0]=0:85e3600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117ab, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117ac, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117ac, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:085e3800
  set TERM
  ph data[0]=0:85e3800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117ac, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117ad, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117ad, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:085e3a00
  set TERM
  ph data[0]=0:85e3a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117ad, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117ae, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117ae, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:085e3c00
  set TERM
  ph data[0]=0:85e3c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117ae, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117af, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117af, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:085e3e00
  set TERM
  ph data[0]=0:85e3e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117af, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117b0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117b0, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:085e4000
  set TERM
  ph data[0]=0:85e4000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117b0, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117b1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117b1, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:085e4200
  set TERM
  ph data[0]=0:85e4200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117b1, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117b2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117b2, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:085e4400
  set TERM
  ph data[0]=0:85e4400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117b2, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117b3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117b3, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:085e4600
  set TERM
  ph data[0]=0:85e4600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117b3, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117b4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117b4, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:085e4800
  set TERM
  ph data[0]=0:85e4800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117b4, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117b5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117b5, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:085e4a00
  set TERM
  ph data[0]=0:85e4a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117b5, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117b6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117b6, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:085e4c00
  set TERM
  ph data[0]=0:85e4c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117b6, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117b7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117b7, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:085e4e00
  set TERM
  ph data[0]=0:85e4e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117b7, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117b8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117b8, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:085e5000
  set TERM
  ph data[0]=0:85e5000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117b8, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117b9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117b9, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:085e5200
  set TERM
  ph data[0]=0:85e5200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117b9, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117ba, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117ba, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:085e5400
  set TERM
  ph data[0]=0:85e5400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117ba, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117bb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117bb, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:085e5600
  set TERM
  ph data[0]=0:85e5600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117bb, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117bc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117bc, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:085e5800
  set TERM
  ph data[0]=0:85e5800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117bc, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117bd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117bd, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:085e5a00
  set TERM
  ph data[0]=0:85e5a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117bd, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117be, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117be, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:085e5c00
  set TERM
  ph data[0]=0:85e5c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117be, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117bf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117bf, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:085e5e00
  set TERM
  ph data[0]=0:85e5e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117bf, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117c0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117c0, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:085e6000
  set TERM
  ph data[0]=0:85e6000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117c0, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117c1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117c1, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:085e6200
  set TERM
  ph data[0]=0:85e6200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117c1, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117c2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117c2, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:085e6400
  set TERM
  ph data[0]=0:85e6400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117c2, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117c3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117c3, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:085e6600
  set TERM
  ph data[0]=0:85e6600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117c3, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117c4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117c4, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:085e6800
  set TERM
  ph data[0]=0:85e6800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117c4, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117c5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117c5, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:085e6a00
  set TERM
  ph data[0]=0:85e6a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117c5, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7117c6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7117c6, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:085e6c00
  set TERM
  ph data[0]=0:85e6c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7117c6, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0xAtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711df7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711df7, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:086ace00
  set TERM
  ph data[0]=0:86ace00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711df7, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711df8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711df8, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:086ad000
  set TERM
  ph data[0]=0:86ad000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711df8, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711df9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711df9, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:086ad200
  set TERM
  ph data[0]=0:86ad200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711df9, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711dfa, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711dfa, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:086ad400
  set TERM
  ph data[0]=0:86ad400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711dfa, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711dfb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711dfb, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:086ad600
  set TERM
  ph data[0]=0:86ad600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711dfb, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711dfc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711dfc, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:086ad800
  set TERM
  ph data[0]=0:86ad800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711dfc, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711dfd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711dfd, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:086ada00
  set TERM
  ph data[0]=0:86ada00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711dfd, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711dfe, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711dfe, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:086adc00
  set TERM
  ph data[0]=0:86adc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711dfe, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711dff, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711dff, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:086ade00
  set TERM
  ph data[0]=0:86ade00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711dff, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e00, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e00, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:086ae000
  set TERM
  ph data[0]=0:86ae000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e00, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e01, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e01, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:086ae200
  set TERM
  ph data[0]=0:86ae200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e01, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e02, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e02, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:086ae400
  set TERM
  ph data[0]=0:86ae400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e02, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e03, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e03, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:086ae600
  set TERM
  ph data[0]=0:86ae600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e03, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e04, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e04, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:086ae800
  set TERM
  ph data[0]=0:86ae800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e04, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e05, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e05, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:086aea00
  set TERM
  ph data[0]=0:86aea00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e05, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e06, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e06, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:086aec00
  set TERM
  ph data[0]=0:86aec00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e06, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e07, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e07, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:086aee00
  set TERM
  ph data[0]=0:86aee00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e07, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e08, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e08, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:086af000
  set TERM
  ph data[0]=0:86af000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e08, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e09, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e09, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:086af200
  set TERM
  ph data[0]=0:86af200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e09, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e0a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e0a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:086af400
  set TERM
  ph data[0]=0:86af400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e0a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e0b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e0b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:086af600
  set TERM
  ph data[0]=0:86af600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e0b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e0c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e0c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:086af800
  set TERM
  ph data[0]=0:86af800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e0c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e0d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e0d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:086afa00
  set TERM
  ph data[0]=0:86afa00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e0d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e0e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e0e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:086afc00
  set TERM
  ph data[0]=0:86afc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e0e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e0f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e0f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:086afe00
  set TERM
  ph data[0]=0:86afe00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e0f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e10, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e10, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:086b0000
  set TERM
  ph data[0]=0:86b0000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e10, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e11, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e11, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:086b0200
  set TERM
  ph data[0]=0:86b0200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e11, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e12, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e12, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:086b0400
  set TERM
  ph data[0]=0:86b0400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e12, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e13, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e13, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:086b0600
  set TERM
  ph data[0]=0:86b0600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e13, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e14, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e14, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:086b0800
  set TERM
  ph data[0]=0:86b0800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e14, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e15, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e15, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:086b0a00
  set TERM
  ph data[0]=0:86b0a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e15, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e16, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e16, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:086b0c00
  set TERM
  ph data[0]=0:86b0c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e16, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e17, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e17, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:086b0e00
  set TERM
  ph data[0]=0:86b0e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e17, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e18, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e18, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:086b1000
  set TERM
  ph data[0]=0:86b1000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e18, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e19, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e19, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:086b1200
  set TERM
  ph data[0]=0:86b1200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e19, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e1a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e1a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:086b1400
  set TERM
  ph data[0]=0:86b1400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e1a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e1b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e1b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:086b1600
  set TERM
  ph data[0]=0:86b1600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e1b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e1c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e1c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:086b1800
  set TERM
  ph data[0]=0:86b1800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e1c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e1d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e1d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:086b1a00
  set TERM
  ph data[0]=0:86b1a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e1d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e1e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e1e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:086b1c00
  set TERM
  ph data[0]=0:86b1c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e1e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e1f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e1f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:086b1e00
  set TERM
  ph data[0]=0:86b1e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e1f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e20, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e20, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:086b2000
  set TERM
  ph data[0]=0:86b2000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e20, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e21, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e21, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:086b2200
  set TERM
  ph data[0]=0:86b2200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e21, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e22, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e22, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:086b2400
  set TERM
  ph data[0]=0:86b2400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e22, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e23, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e23, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:086b2600
  set TERM
  ph data[0]=0:86b2600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e23, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e24, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e24, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:086b2800
  set TERM
  ph data[0]=0:86b2800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e24, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e25, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e25, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:086b2a00
  set TERM
  ph data[0]=0:86b2a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e25, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e26, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e26, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:086b2c00
  set TERM
  ph data[0]=0:86b2c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e26, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e27, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e27, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:086b2e00
  set TERM
  ph data[0]=0:86b2e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e27, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e28, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e28, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:086b3000
  set TERM
  ph data[0]=0:86b3000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e28, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e29, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e29, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:086b3200
  set TERM
  ph data[0]=0:86b3200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e29, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e2a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e2a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:086b3400
  set TERM
  ph data[0]=0:86b3400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e2a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e2b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e2b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:086b3600
  set TERM
  ph data[0]=0:86b3600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e2b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e2c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e2c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:086b3800
  set TERM
  ph data[0]=0:86b3800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e2c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e2d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e2d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:086b3a00
  set TERM
  ph data[0]=0:86b3a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e2d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e2e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e2e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:086b3c00
  set TERM
  ph data[0]=0:86b3c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e2e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e2f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e2f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:086b3e00
  set TERM
  ph data[0]=0:86b3e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e2f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e30, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e30, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:086b4000
  set TERM
  ph data[0]=0:86b4000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e30, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e31, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e31, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:086b4200
  set TERM
  ph data[0]=0:86b4200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e31, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e32, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e32, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:086b4400
  set TERM
  ph data[0]=0:86b4400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e32, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e33, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e33, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:086b4600
  set TERM
  ph data[0]=0:86b4600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e33, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e34, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e34, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:086b4800
  set TERM
  ph data[0]=0:86b4800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e34, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e35, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e35, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:086b4a00
  set TERM
  ph data[0]=0:86b4a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e35, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e36, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e36, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:086b4c00
  set TERM
  ph data[0]=0:86b4c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e36, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e37, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e37, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:086b4e00
  set TERM
  ph data[0]=0:86b4e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e37, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e38, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e38, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:086b5000
  set TERM
  ph data[0]=0:86b5000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e38, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e39, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e39, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:086b5200
  set TERM
  ph data[0]=0:86b5200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e39, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e3a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e3a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:086b5400
  set TERM
  ph data[0]=0:86b5400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e3a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e3b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e3b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:086b5600
  set TERM
  ph data[0]=0:86b5600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e3b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e3c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e3c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:086b5800
  set TERM
  ph data[0]=0:86b5800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e3c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e3d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e3d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:086b5a00
  set TERM
  ph data[0]=0:86b5a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e3d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e3e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e3e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:086b5c00
  set TERM
  ph data[0]=0:86b5c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e3e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e3f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:086b5e00
  set TERM
  ph data[0]=0:86b5e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e3f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e40, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e40, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:086b6000
  set TERM
  ph data[0]=0:86b6000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e40, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e41, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e41, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:086b6200
  set TERM
  ph data[0]=0:86b6200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e41, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e42, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e42, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:086b6400
  set TERM
  ph data[0]=0:86b6400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e42, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e43, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e43, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:086b6600
  set TERM
  ph data[0]=0:86b6600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e43, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e44, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e44, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:086b6800
  set TERM
  ph data[0]=0:86b6800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e44, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e45, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e45, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:086b6a00
  set TERM
  ph data[0]=0:86b6a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e45, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e46, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e46, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:086b6c00
  set TERM
  ph data[0]=0:86b6c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e46, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e47, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e47, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:086b6e00
  set TERM
  ph data[0]=0:86b6e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e47, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e48, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e48, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:086b7000
  set TERM
  ph data[0]=0:86b7000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e48, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e49, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e49, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:086b7200
  set TERM
  ph data[0]=0:86b7200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e49, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e4a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e4a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:086b7400
  set TERM
  ph data[0]=0:86b7400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e4a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e4b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e4b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:086b7600
  set TERM
  ph data[0]=0:86b7600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e4b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e4c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e4c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:086b7800
  set TERM
  ph data[0]=0:86b7800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e4c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e4d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e4d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:086b7a00
  set TERM
  ph data[0]=0:86b7a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e4d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e4e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e4e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:086b7c00
  set TERM
  ph data[0]=0:86b7c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e4e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e4f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e4f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:086b7e00
  set TERM
  ph data[0]=0:86b7e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e4f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e50, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e50, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:086b8000
  set TERM
  ph data[0]=0:86b8000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e50, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e51, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e51, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:086b8200
  set TERM
  ph data[0]=0:86b8200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e51, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e52, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e52, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:086b8400
  set TERM
  ph data[0]=0:86b8400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e52, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e53, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e53, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:086b8600
  set TERM
  ph data[0]=0:86b8600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e53, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e54, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e54, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:086b8800
  set TERM
  ph data[0]=0:86b8800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e54, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e55, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e55, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:086b8a00
  set TERM
  ph data[0]=0:86b8a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e55, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e56, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e56, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:086b8c00
  set TERM
  ph data[0]=0:86b8c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e56, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e57, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e57, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:086b8e00
  set TERM
  ph data[0]=0:86b8e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e57, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e58, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e58, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:086b9000
  set TERM
  ph data[0]=0:86b9000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e58, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e59, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e59, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:086b9200
  set TERM
  ph data[0]=0:86b9200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e59, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e5a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e5a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:086b9400
  set TERM
  ph data[0]=0:86b9400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e5a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e5b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e5b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:086b9600
  set TERM
  ph data[0]=0:86b9600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e5b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e5c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e5c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:086b9800
  set TERM
  ph data[0]=0:86b9800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e5c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e5d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e5d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:086b9a00
  set TERM
  ph data[0]=0:86b9a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e5d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e5e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e5e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:086b9c00
  set TERM
  ph data[0]=0:86b9c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e5e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e5f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e5f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:086b9e00
  set TERM
  ph data[0]=0:86b9e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e5f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e60, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e60, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:086ba000
  set TERM
  ph data[0]=0:86ba000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e60, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e61, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e61, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:086ba200
  set TERM
  ph data[0]=0:86ba200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e61, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e62, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e62, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:086ba400
  set TERM
  ph data[0]=0:86ba400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e62, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e63, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e63, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:086ba600
  set TERM
  ph data[0]=0:86ba600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e63, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e64, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e64, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:086ba800
  set TERM
  ph data[0]=0:86ba800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e64, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e65, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e65, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:086baa00
  set TERM
  ph data[0]=0:86baa00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e65, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e66, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e66, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:086bac00
  set TERM
  ph data[0]=0:86bac00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e66, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e67, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e67, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:086bae00
  set TERM
  ph data[0]=0:86bae00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e67, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e68, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e68, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:086bb000
  set TERM
  ph data[0]=0:86bb000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e68, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e69, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e69, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:086bb200
  set TERM
  ph data[0]=0:86bb200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e69, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e6a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e6a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:086bb400
  set TERM
  ph data[0]=0:86bb400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e6a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e6b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e6b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:086bb600
  set TERM
  ph data[0]=0:86bb600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e6b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e6c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e6c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:086bb800
  set TERM
  ph data[0]=0:86bb800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e6c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e6d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e6d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:086bba00
  set TERM
  ph data[0]=0:86bba00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e6d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e6e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e6e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:086bbc00
  set TERM
  ph data[0]=0:86bbc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e6e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e6f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e6f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:086bbe00
  set TERM
  ph data[0]=0:86bbe00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e6f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e70, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e70, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:086bc000
  set TERM
  ph data[0]=0:86bc000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e70, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e71, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e71, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:086bc200
  set TERM
  ph data[0]=0:86bc200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e71, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e72, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e72, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:086bc400
  set TERM
  ph data[0]=0:86bc400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e72, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e73, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e73, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:086bc600
  set TERM
  ph data[0]=0:86bc600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e73, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e74, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e74, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:086bc800
  set TERM
  ph data[0]=0:86bc800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e74, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e75, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e75, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:086bca00
  set TERM
  ph data[0]=0:86bca00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e75, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e76, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e76, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:086bcc00
  set TERM
  ph data[0]=0:86bcc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e76, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e77, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e77, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:086bce00
  set TERM
  ph data[0]=0:86bce00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e77, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e78, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e78, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:086bd000
  set TERM
  ph data[0]=0:86bd000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e78, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e79, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e79, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:086bd200
  set TERM
  ph data[0]=0:86bd200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e79, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e7a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e7a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:086bd400
  set TERM
  ph data[0]=0:86bd400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e7a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e7b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e7b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:086bd600
  set TERM
  ph data[0]=0:86bd600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e7b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e7c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e7c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:086bd800
  set TERM
  ph data[0]=0:86bd800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e7c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e7d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e7d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:086bda00
  set TERM
  ph data[0]=0:86bda00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e7d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 711e7e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 711e7e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:086bdc00
  set TERM
  ph data[0]=0:86bdc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x711e7e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71213f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71213f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08715e00
  set TERM
  ph data[0]=0:8715e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71213f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712140, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712140, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08716000
  set TERM
  ph data[0]=0:8716000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712140, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712141, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712141, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08716200
  set TERM
  ph data[0]=0:8716200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712141, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712142, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712142, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08716400
  set TERM
  ph data[0]=0:8716400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712142, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712143, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712143, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08716600
  set TERM
  ph data[0]=0:8716600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712143, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712144, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712144, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08716800
  set TERM
  ph data[0]=0:8716800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712144, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712145, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712145, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08716a00
  set TERM
  ph data[0]=0:8716a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712145, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712146, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712146, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08716c00
  set TERM
  ph data[0]=0:8716c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712146, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712147, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712147, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08716e00
  set TERM
  ph data[0]=0:8716e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712147, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712148, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712148, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08717000
  set TERM
  ph data[0]=0:8717000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712148, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712149, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712149, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08717200
  set TERM
  ph data[0]=0:8717200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712149, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71214a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71214a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08717400
  set TERM
  ph data[0]=0:8717400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71214a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71214b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71214b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08717600
  set TERM
  ph data[0]=0:8717600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71214b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71214c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71214c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08717800
  set TERM
  ph data[0]=0:8717800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71214c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71214d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71214d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08717a00
  set TERM
  ph data[0]=0:8717a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71214d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71214e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71214e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08717c00
  set TERM
  ph data[0]=0:8717c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71214e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71214f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71214f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08717e00
  set TERM
  ph data[0]=0:8717e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71214f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712150, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712150, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08718000
  set TERM
  ph data[0]=0:8718000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712150, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712151, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712151, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08718200
  set TERM
  ph data[0]=0:8718200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712151, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712152, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712152, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08718400
  set TERM
  ph data[0]=0:8718400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712152, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712153, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712153, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08718600
  set TERM
  ph data[0]=0:8718600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712153, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712154, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712154, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08718800
  set TERM
  ph data[0]=0:8718800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712154, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712155, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712155, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08718a00
  set TERM
  ph data[0]=0:8718a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712155, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712156, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712156, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08718c00
  set TERM
  ph data[0]=0:8718c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712156, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712157, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712157, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08718e00
  set TERM
  ph data[0]=0:8718e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712157, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712158, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712158, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08719000
  set TERM
  ph data[0]=0:8719000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712158, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712159, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712159, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08719200
  set TERM
  ph data[0]=0:8719200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712159, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71215a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71215a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08719400
  set TERM
  ph data[0]=0:8719400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71215a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71215b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71215b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08719600
  set TERM
  ph data[0]=0:8719600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71215b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71215c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71215c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08719800
  set TERM
  ph data[0]=0:8719800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71215c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71215d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71215d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08719a00
  set TERM
  ph data[0]=0:8719a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71215d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71215e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71215e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08719c00
  set TERM
  ph data[0]=0:8719c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71215e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71215f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71215f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08719e00
  set TERM
  ph data[0]=0:8719e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71215f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712160, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712160, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0871a000
  set TERM
  ph data[0]=0:871a000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712160, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712161, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712161, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0871a200
  set TERM
  ph data[0]=0:871a200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712161, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712162, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712162, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0871a400
  set TERM
  ph data[0]=0:871a400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712162, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712163, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712163, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0871a600
  set TERM
  ph data[0]=0:871a600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712163, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712164, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712164, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0871a800
  set TERM
  ph data[0]=0:871a800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712164, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712165, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712165, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0871aa00
  set TERM
  ph data[0]=0:871aa00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712165, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712166, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712166, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0871ac00
  set TERM
  ph data[0]=0:871ac00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712166, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712167, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712167, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0871ae00
  set TERM
  ph data[0]=0:871ae00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712167, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712168, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712168, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0871b000
  set TERM
  ph data[0]=0:871b000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712168, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712169, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712169, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0871b200
  set TERM
  ph data[0]=0:871b200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712169, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71216a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71216a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0871b400
  set TERM
  ph data[0]=0:871b400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71216a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71216b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71216b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0871b600
  set TERM
  ph data[0]=0:871b600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71216b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71216c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71216c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0871b800
  set TERM
  ph data[0]=0:871b800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71216c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71216d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71216d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0871ba00
  set TERM
  ph data[0]=0:871ba00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71216d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71216e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71216e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0871bc00
  set TERM
  ph data[0]=0:871bc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71216e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71216f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71216f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0871be00
  set TERM
  ph data[0]=0:871be00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71216f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712170, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712170, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0871c000
  set TERM
  ph data[0]=0:871c000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712170, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712171, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712171, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0871c200
  set TERM
  ph data[0]=0:871c200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712171, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712172, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712172, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0871c400
  set TERM
  ph data[0]=0:871c400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712172, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712173, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712173, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0871c600
  set TERM
  ph data[0]=0:871c600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712173, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712174, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712174, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0871c800
  set TERM
  ph data[0]=0:871c800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712174, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712175, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712175, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0871ca00
  set TERM
  ph data[0]=0:871ca00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712175, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712176, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712176, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0871cc00
  set TERM
  ph data[0]=0:871cc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712176, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712177, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712177, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0871ce00
  set TERM
  ph data[0]=0:871ce00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712177, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712178, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712178, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0871d000
  set TERM
  ph data[0]=0:871d000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712178, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712179, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712179, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0871d200
  set TERM
  ph data[0]=0:871d200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712179, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71217a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71217a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0871d400
  set TERM
  ph data[0]=0:871d400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71217a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71217b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71217b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0871d600
  set TERM
  ph data[0]=0:871d600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71217b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71217c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71217c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0871d800
  set TERM
  ph data[0]=0:871d800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71217c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71217d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71217d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0871da00
  set TERM
  ph data[0]=0:871da00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71217d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71217e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71217e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0871dc00
  set TERM
  ph data[0]=0:871dc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71217e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71217f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71217f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0871de00
  set TERM
  ph data[0]=0:871de00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71217f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712180, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712180, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0871e000
  set TERM
  ph data[0]=0:871e000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712180, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712181, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712181, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0871e200
  set TERM
  ph data[0]=0:871e200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712181, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712182, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712182, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0871e400
  set TERM
  ph data[0]=0:871e400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712182, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712183, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712183, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0871e600
  set TERM
  ph data[0]=0:871e600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712183, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712184, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712184, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0871e800
  set TERM
  ph data[0]=0:871e800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712184, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712185, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712185, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0871ea00
  set TERM
  ph data[0]=0:871ea00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712185, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712186, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712186, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0871ec00
  set TERM
  ph data[0]=0:871ec00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712186, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712187, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712187, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0871ee00
  set TERM
  ph data[0]=0:871ee00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712187, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712188, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712188, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0871f000
  set TERM
  ph data[0]=0:871f000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712188, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712189, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712189, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0871f200
  set TERM
  ph data[0]=0:871f200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712189, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71218a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71218a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0871f400
  set TERM
  ph data[0]=0:871f400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71218a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71218b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71218b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0871f600
  set TERM
  ph data[0]=0:871f600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71218b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71218c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71218c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0871f800
  set TERM
  ph data[0]=0:871f800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71218c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71218d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71218d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0871fa00
  set TERM
  ph data[0]=0:871fa00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71218d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71218e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71218e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0871fc00
  set TERM
  ph data[0]=0:871fc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71218e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71218f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71218f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0871fe00
  set TERM
  ph data[0]=0:871fe00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71218f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712190, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712190, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08720000
  set TERM
  ph data[0]=0:8720000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712190, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712191, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712191, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08720200
  set TERM
  ph data[0]=0:8720200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712191, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712192, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712192, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08720400
  set TERM
  ph data[0]=0:8720400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712192, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712193, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712193, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08720600
  set TERM
  ph data[0]=0:8720600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712193, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712194, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712194, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08720800
  set TERM
  ph data[0]=0:8720800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712194, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712195, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712195, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08720a00
  set TERM
  ph data[0]=0:8720a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712195, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712196, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712196, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08720c00
  set TERM
  ph data[0]=0:8720c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712196, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712197, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712197, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08720e00
  set TERM
  ph data[0]=0:8720e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712197, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712198, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712198, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08721000
  set TERM
  ph data[0]=0:8721000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712198, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712199, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712199, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08721200
  set TERM
  ph data[0]=0:8721200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712199, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71219a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71219a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08721400
  set TERM
  ph data[0]=0:8721400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71219a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71219b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71219b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08721600
  set TERM
  ph data[0]=0:8721600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71219b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71219c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71219c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08721800
  set TERM
  ph data[0]=0:8721800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71219c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71219d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71219d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08721a00
  set TERM
  ph data[0]=0:8721a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71219d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71219e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71219e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08721c00
  set TERM
  ph data[0]=0:8721c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71219e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71219f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71219f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08721e00
  set TERM
  ph data[0]=0:8721e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71219f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121a0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121a0, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08722000
  set TERM
  ph data[0]=0:8722000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121a0, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121a1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121a1, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08722200
  set TERM
  ph data[0]=0:8722200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121a1, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121a2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121a2, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08722400
  set TERM
  ph data[0]=0:8722400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121a2, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121a3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121a3, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08722600
  set TERM
  ph data[0]=0:8722600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121a3, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121a4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121a4, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08722800
  set TERM
  ph data[0]=0:8722800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121a4, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121a5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121a5, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08722a00
  set TERM
  ph data[0]=0:8722a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121a5, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121a6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121a6, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08722c00
  set TERM
  ph data[0]=0:8722c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121a6, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121a7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121a7, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08722e00
  set TERM
  ph data[0]=0:8722e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121a7, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121a8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121a8, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08723000
  set TERM
  ph data[0]=0:8723000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121a8, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121a9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121a9, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08723200
  set TERM
  ph data[0]=0:8723200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121a9, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121aa, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121aa, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08723400
  set TERM
  ph data[0]=0:8723400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121aa, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121ab, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121ab, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08723600
  set TERM
  ph data[0]=0:8723600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121ab, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121ac, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121ac, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08723800
  set TERM
  ph data[0]=0:8723800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121ac, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121ad, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121ad, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08723a00
  set TERM
  ph data[0]=0:8723a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121ad, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121ae, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121ae, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08723c00
  set TERM
  ph data[0]=0:8723c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121ae, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121af, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121af, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08723e00
  set TERM
  ph data[0]=0:8723e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121af, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121b0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121b0, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08724000
  set TERM
  ph data[0]=0:8724000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121b0, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121b1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121b1, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08724200
  set TERM
  ph data[0]=0:8724200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121b1, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121b2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121b2, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08724400
  set TERM
  ph data[0]=0:8724400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121b2, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121b3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121b3, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08724600
  set TERM
  ph data[0]=0:8724600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121b3, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121b4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121b4, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08724800
  set TERM
  ph data[0]=0:8724800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121b4, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121b5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121b5, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08724a00
  set TERM
  ph data[0]=0:8724a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121b5, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121b6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121b6, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08724c00
  set TERM
  ph data[0]=0:8724c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121b6, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121b7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121b7, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08724e00
  set TERM
  ph data[0]=0:8724e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121b7, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121b8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121b8, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08725000
  set TERM
  ph data[0]=0:8725000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121b8, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121b9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121b9, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08725200
  set TERM
  ph data[0]=0:8725200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121b9, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121ba, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121ba, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08725400
  set TERM
  ph data[0]=0:8725400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121ba, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121bb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121bb, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08725600
  set TERM
  ph data[0]=0:8725600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121bb, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121bc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121bc, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08725800
  set TERM
  ph data[0]=0:8725800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121bc, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121bd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121bd, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08725a00
  set TERM
  ph data[0]=0:8725a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121bd, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121be, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121be, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08725c00
  set TERM
  ph data[0]=0:8725c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121be, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121bf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121bf, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08725e00
  set TERM
  ph data[0]=0:8725e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121bf, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121c0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121c0, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08726000
  set TERM
  ph data[0]=0:8726000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121c0, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121c1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121c1, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08726200
  set TERM
  ph data[0]=0:8726200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121c1, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121c2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121c2, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08726400
  set TERM
  ph data[0]=0:8726400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121c2, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121c3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121c3, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08726600
  set TERM
  ph data[0]=0:8726600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121c3, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121c4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121c4, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08726800
  set TERM
  ph data[0]=0:8726800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121c4, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121c5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121c5, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08726a00
  set TERM
  ph data[0]=0:8726a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121c5, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7121c6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7121c6, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08726c00
  set TERM
  ph data[0]=0:8726c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7121c6, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0xAtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7127eb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7127eb, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:087eb600
  set TERM
  ph data[0]=0:87eb600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7127eb, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7127ec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7127ec, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:087eb800
  set TERM
  ph data[0]=0:87eb800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7127ec, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7127ed, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7127ed, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:087eba00
  set TERM
  ph data[0]=0:87eba00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7127ed, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7127ee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7127ee, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:087ebc00
  set TERM
  ph data[0]=0:87ebc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7127ee, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7127ef, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7127ef, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:087ebe00
  set TERM
  ph data[0]=0:87ebe00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7127ef, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7127f0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7127f0, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:087ec000
  set TERM
  ph data[0]=0:87ec000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7127f0, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7127f1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7127f1, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:087ec200
  set TERM
  ph data[0]=0:87ec200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7127f1, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7127f2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7127f2, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:087ec400
  set TERM
  ph data[0]=0:87ec400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7127f2, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7127f3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7127f3, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:087ec600
  set TERM
  ph data[0]=0:87ec600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7127f3, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7127f4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7127f4, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:087ec800
  set TERM
  ph data[0]=0:87ec800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7127f4, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7127f5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7127f5, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:087eca00
  set TERM
  ph data[0]=0:87eca00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7127f5, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7127f6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7127f6, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:087ecc00
  set TERM
  ph data[0]=0:87ecc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7127f6, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7127f7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7127f7, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:087ece00
  set TERM
  ph data[0]=0:87ece00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7127f7, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7127f8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7127f8, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:087ed000
  set TERM
  ph data[0]=0:87ed000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7127f8, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7127f9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7127f9, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:087ed200
  set TERM
  ph data[0]=0:87ed200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7127f9, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7127fa, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7127fa, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:087ed400
  set TERM
  ph data[0]=0:87ed400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7127fa, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7127fb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7127fb, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:087ed600
  set TERM
  ph data[0]=0:87ed600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7127fb, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7127fc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7127fc, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:087ed800
  set TERM
  ph data[0]=0:87ed800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7127fc, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7127fd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7127fd, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:087eda00
  set TERM
  ph data[0]=0:87eda00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7127fd, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7127fe, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7127fe, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:087edc00
  set TERM
  ph data[0]=0:87edc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7127fe, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 7127ff, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 7127ff, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:087ede00
  set TERM
  ph data[0]=0:87ede00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x7127ff, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712800, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712800, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:087ee000
  set TERM
  ph data[0]=0:87ee000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712800, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712801, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712801, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:087ee200
  set TERM
  ph data[0]=0:87ee200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712801, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712802, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712802, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:087ee400
  set TERM
  ph data[0]=0:87ee400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712802, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712803, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712803, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:087ee600
  set TERM
  ph data[0]=0:87ee600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712803, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712804, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712804, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:087ee800
  set TERM
  ph data[0]=0:87ee800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712804, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712805, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712805, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:087eea00
  set TERM
  ph data[0]=0:87eea00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712805, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712806, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712806, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:087eec00
  set TERM
  ph data[0]=0:87eec00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712806, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712807, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712807, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:087eee00
  set TERM
  ph data[0]=0:87eee00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712807, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712808, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712808, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:087ef000
  set TERM
  ph data[0]=0:87ef000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712808, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712809, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712809, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:087ef200
  set TERM
  ph data[0]=0:87ef200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712809, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71280a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71280a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:087ef400
  set TERM
  ph data[0]=0:87ef400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71280a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71280b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71280b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:087ef600
  set TERM
  ph data[0]=0:87ef600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71280b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71280c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71280c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:087ef800
  set TERM
  ph data[0]=0:87ef800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71280c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71280d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71280d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:087efa00
  set TERM
  ph data[0]=0:87efa00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71280d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71280e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71280e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:087efc00
  set TERM
  ph data[0]=0:87efc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71280e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71280f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71280f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:087efe00
  set TERM
  ph data[0]=0:87efe00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71280f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712810, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712810, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:087f0000
  set TERM
  ph data[0]=0:87f0000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712810, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712811, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712811, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:087f0200
  set TERM
  ph data[0]=0:87f0200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712811, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712812, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712812, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:087f0400
  set TERM
  ph data[0]=0:87f0400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712812, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712813, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712813, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:087f0600
  set TERM
  ph data[0]=0:87f0600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712813, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712814, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712814, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:087f0800
  set TERM
  ph data[0]=0:87f0800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712814, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712815, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712815, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:087f0a00
  set TERM
  ph data[0]=0:87f0a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712815, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712816, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712816, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:087f0c00
  set TERM
  ph data[0]=0:87f0c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712816, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712817, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712817, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:087f0e00
  set TERM
  ph data[0]=0:87f0e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712817, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712818, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712818, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:087f1000
  set TERM
  ph data[0]=0:87f1000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712818, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712819, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712819, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:087f1200
  set TERM
  ph data[0]=0:87f1200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712819, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71281a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71281a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:087f1400
  set TERM
  ph data[0]=0:87f1400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71281a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71281b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71281b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:087f1600
  set TERM
  ph data[0]=0:87f1600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71281b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71281c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71281c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:087f1800
  set TERM
  ph data[0]=0:87f1800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71281c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71281d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71281d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:087f1a00
  set TERM
  ph data[0]=0:87f1a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71281d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71281e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71281e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:087f1c00
  set TERM
  ph data[0]=0:87f1c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71281e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71281f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71281f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:087f1e00
  set TERM
  ph data[0]=0:87f1e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71281f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712820, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712820, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:087f2000
  set TERM
  ph data[0]=0:87f2000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712820, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712821, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712821, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:087f2200
  set TERM
  ph data[0]=0:87f2200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712821, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712822, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712822, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:087f2400
  set TERM
  ph data[0]=0:87f2400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712822, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712823, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712823, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:087f2600
  set TERM
  ph data[0]=0:87f2600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712823, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712824, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712824, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:087f2800
  set TERM
  ph data[0]=0:87f2800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712824, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712825, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712825, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:087f2a00
  set TERM
  ph data[0]=0:87f2a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712825, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712826, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712826, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:087f2c00
  set TERM
  ph data[0]=0:87f2c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712826, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712827, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712827, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:087f2e00
  set TERM
  ph data[0]=0:87f2e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712827, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712828, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712828, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:087f3000
  set TERM
  ph data[0]=0:87f3000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712828, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712829, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712829, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:087f3200
  set TERM
  ph data[0]=0:87f3200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712829, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71282a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71282a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:087f3400
  set TERM
  ph data[0]=0:87f3400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71282a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71282b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71282b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:087f3600
  set TERM
  ph data[0]=0:87f3600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71282b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71282c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71282c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:087f3800
  set TERM
  ph data[0]=0:87f3800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71282c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71282d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71282d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:087f3a00
  set TERM
  ph data[0]=0:87f3a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71282d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71282e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71282e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:087f3c00
  set TERM
  ph data[0]=0:87f3c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71282e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71282f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71282f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:087f3e00
  set TERM
  ph data[0]=0:87f3e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71282f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712830, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712830, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:087f4000
  set TERM
  ph data[0]=0:87f4000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712830, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712831, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712831, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:087f4200
  set TERM
  ph data[0]=0:87f4200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712831, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712832, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712832, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:087f4400
  set TERM
  ph data[0]=0:87f4400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712832, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712833, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712833, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:087f4600
  set TERM
  ph data[0]=0:87f4600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712833, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712834, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712834, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:087f4800
  set TERM
  ph data[0]=0:87f4800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712834, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712835, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712835, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:087f4a00
  set TERM
  ph data[0]=0:87f4a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712835, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712836, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712836, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:087f4c00
  set TERM
  ph data[0]=0:87f4c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712836, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712837, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712837, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:087f4e00
  set TERM
  ph data[0]=0:87f4e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712837, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712838, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712838, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:087f5000
  set TERM
  ph data[0]=0:87f5000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712838, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712839, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712839, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:087f5200
  set TERM
  ph data[0]=0:87f5200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712839, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71283a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71283a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:087f5400
  set TERM
  ph data[0]=0:87f5400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71283a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71283b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71283b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:087f5600
  set TERM
  ph data[0]=0:87f5600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71283b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71283c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71283c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:087f5800
  set TERM
  ph data[0]=0:87f5800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71283c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71283d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71283d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:087f5a00
  set TERM
  ph data[0]=0:87f5a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71283d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71283e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71283e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:087f5c00
  set TERM
  ph data[0]=0:87f5c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71283e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71283f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71283f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:087f5e00
  set TERM
  ph data[0]=0:87f5e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71283f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712840, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712840, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:087f6000
  set TERM
  ph data[0]=0:87f6000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712840, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712841, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712841, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:087f6200
  set TERM
  ph data[0]=0:87f6200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712841, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712842, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712842, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:087f6400
  set TERM
  ph data[0]=0:87f6400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712842, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712843, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712843, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:087f6600
  set TERM
  ph data[0]=0:87f6600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712843, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712844, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712844, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:087f6800
  set TERM
  ph data[0]=0:87f6800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712844, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712845, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712845, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:087f6a00
  set TERM
  ph data[0]=0:87f6a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712845, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712846, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712846, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:087f6c00
  set TERM
  ph data[0]=0:87f6c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712846, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712847, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712847, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:087f6e00
  set TERM
  ph data[0]=0:87f6e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712847, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712848, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712848, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:087f7000
  set TERM
  ph data[0]=0:87f7000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712848, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712849, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712849, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:087f7200
  set TERM
  ph data[0]=0:87f7200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712849, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71284a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71284a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:087f7400
  set TERM
  ph data[0]=0:87f7400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71284a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71284b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71284b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:087f7600
  set TERM
  ph data[0]=0:87f7600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71284b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71284c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71284c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:087f7800
  set TERM
  ph data[0]=0:87f7800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71284c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71284d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71284d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:087f7a00
  set TERM
  ph data[0]=0:87f7a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71284d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71284e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71284e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:087f7c00
  set TERM
  ph data[0]=0:87f7c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71284e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71284f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71284f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:087f7e00
  set TERM
  ph data[0]=0:87f7e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71284f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712850, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712850, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:087f8000
  set TERM
  ph data[0]=0:87f8000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712850, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712851, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712851, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:087f8200
  set TERM
  ph data[0]=0:87f8200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712851, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712852, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712852, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:087f8400
  set TERM
  ph data[0]=0:87f8400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712852, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712853, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712853, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:087f8600
  set TERM
  ph data[0]=0:87f8600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712853, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712854, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712854, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:087f8800
  set TERM
  ph data[0]=0:87f8800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712854, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712855, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712855, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:087f8a00
  set TERM
  ph data[0]=0:87f8a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712855, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712856, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712856, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:087f8c00
  set TERM
  ph data[0]=0:87f8c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712856, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712857, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712857, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:087f8e00
  set TERM
  ph data[0]=0:87f8e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712857, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712858, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712858, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:087f9000
  set TERM
  ph data[0]=0:87f9000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712858, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712859, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712859, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:087f9200
  set TERM
  ph data[0]=0:87f9200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712859, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71285a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71285a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:087f9400
  set TERM
  ph data[0]=0:87f9400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71285a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71285b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71285b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:087f9600
  set TERM
  ph data[0]=0:87f9600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71285b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71285c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71285c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:087f9800
  set TERM
  ph data[0]=0:87f9800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71285c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71285d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71285d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:087f9a00
  set TERM
  ph data[0]=0:87f9a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71285d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71285e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71285e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:087f9c00
  set TERM
  ph data[0]=0:87f9c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71285e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71285f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71285f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:087f9e00
  set TERM
  ph data[0]=0:87f9e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71285f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712860, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712860, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:087fa000
  set TERM
  ph data[0]=0:87fa000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712860, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712861, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712861, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:087fa200
  set TERM
  ph data[0]=0:87fa200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712861, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712862, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712862, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:087fa400
  set TERM
  ph data[0]=0:87fa400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712862, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712863, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712863, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:087fa600
  set TERM
  ph data[0]=0:87fa600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712863, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712864, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712864, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:087fa800
  set TERM
  ph data[0]=0:87fa800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712864, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712865, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712865, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:087faa00
  set TERM
  ph data[0]=0:87faa00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712865, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712866, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712866, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:087fac00
  set TERM
  ph data[0]=0:87fac00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712866, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712867, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712867, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:087fae00
  set TERM
  ph data[0]=0:87fae00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712867, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712868, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712868, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:087fb000
  set TERM
  ph data[0]=0:87fb000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712868, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712869, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712869, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:087fb200
  set TERM
  ph data[0]=0:87fb200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712869, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71286a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71286a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:087fb400
  set TERM
  ph data[0]=0:87fb400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71286a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71286b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71286b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:087fb600
  set TERM
  ph data[0]=0:87fb600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71286b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71286c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71286c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:087fb800
  set TERM
  ph data[0]=0:87fb800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71286c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71286d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71286d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:087fba00
  set TERM
  ph data[0]=0:87fba00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71286d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71286e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71286e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:087fbc00
  set TERM
  ph data[0]=0:87fbc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71286e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 71286f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 71286f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:087fbe00
  set TERM
  ph data[0]=0:87fbe00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x71286f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712870, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712870, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:087fc000
  set TERM
  ph data[0]=0:87fc000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712870, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712871, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712871, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:087fc200
  set TERM
  ph data[0]=0:87fc200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712871, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712872, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712872, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:087fc400
  set TERM
  ph data[0]=0:87fc400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712872, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0xAtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bb6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bb6, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08864c00
  set TERM
  ph data[0]=0:8864c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bb6, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bb7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bb7, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08864e00
  set TERM
  ph data[0]=0:8864e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bb7, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bb8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bb8, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08865000
  set TERM
  ph data[0]=0:8865000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bb8, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bb9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bb9, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08865200
  set TERM
  ph data[0]=0:8865200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bb9, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bba, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bba, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08865400
  set TERM
  ph data[0]=0:8865400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bba, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bbb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bbb, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08865600
  set TERM
  ph data[0]=0:8865600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bbb, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bbc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bbc, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08865800
  set TERM
  ph data[0]=0:8865800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bbc, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bbd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bbd, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08865a00
  set TERM
  ph data[0]=0:8865a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bbd, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bbe, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bbe, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08865c00
  set TERM
  ph data[0]=0:8865c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bbe, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bbf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bbf, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08865e00
  set TERM
  ph data[0]=0:8865e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bbf, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bc0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bc0, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08866000
  set TERM
  ph data[0]=0:8866000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bc0, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bc1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bc1, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08866200
  set TERM
  ph data[0]=0:8866200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bc1, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bc2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bc2, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08866400
  set TERM
  ph data[0]=0:8866400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bc2, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bc3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bc3, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08866600
  set TERM
  ph data[0]=0:8866600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bc3, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bc4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bc4, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08866800
  set TERM
  ph data[0]=0:8866800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bc4, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bc5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bc5, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08866a00
  set TERM
  ph data[0]=0:8866a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bc5, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bc6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bc6, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08866c00
  set TERM
  ph data[0]=0:8866c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bc6, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bc7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bc7, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08866e00
  set TERM
  ph data[0]=0:8866e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bc7, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bc8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bc8, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08867000
  set TERM
  ph data[0]=0:8867000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bc8, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bc9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bc9, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08867200
  set TERM
  ph data[0]=0:8867200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bc9, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bca, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bca, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08867400
  set TERM
  ph data[0]=0:8867400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bca, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bcb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bcb, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08867600
  set TERM
  ph data[0]=0:8867600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bcb, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bcc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bcc, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08867800
  set TERM
  ph data[0]=0:8867800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bcc, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bcd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bcd, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08867a00
  set TERM
  ph data[0]=0:8867a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bcd, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bce, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bce, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08867c00
  set TERM
  ph data[0]=0:8867c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bce, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bcf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bcf, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08867e00
  set TERM
  ph data[0]=0:8867e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bcf, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bd0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bd0, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08868000
  set TERM
  ph data[0]=0:8868000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bd0, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bd1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bd1, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08868200
  set TERM
  ph data[0]=0:8868200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bd1, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bd2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bd2, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08868400
  set TERM
  ph data[0]=0:8868400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bd2, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bd3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bd3, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08868600
  set TERM
  ph data[0]=0:8868600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bd3, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bd4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bd4, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08868800
  set TERM
  ph data[0]=0:8868800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bd4, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bd5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bd5, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08868a00
  set TERM
  ph data[0]=0:8868a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bd5, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bd6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bd6, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08868c00
  set TERM
  ph data[0]=0:8868c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bd6, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bd7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bd7, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08868e00
  set TERM
  ph data[0]=0:8868e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bd7, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bd8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bd8, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08869000
  set TERM
  ph data[0]=0:8869000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bd8, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bd9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bd9, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08869200
  set TERM
  ph data[0]=0:8869200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bd9, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bda, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bda, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08869400
  set TERM
  ph data[0]=0:8869400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bda, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bdb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bdb, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08869600
  set TERM
  ph data[0]=0:8869600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bdb, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bdc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bdc, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08869800
  set TERM
  ph data[0]=0:8869800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bdc, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bdd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bdd, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08869a00
  set TERM
  ph data[0]=0:8869a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bdd, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bde, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bde, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08869c00
  set TERM
  ph data[0]=0:8869c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bde, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bdf, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bdf, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08869e00
  set TERM
  ph data[0]=0:8869e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bdf, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712be0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712be0, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0886a000
  set TERM
  ph data[0]=0:886a000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712be0, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712be1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712be1, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0886a200
  set TERM
  ph data[0]=0:886a200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712be1, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712be2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712be2, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0886a400
  set TERM
  ph data[0]=0:886a400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712be2, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712be3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712be3, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0886a600
  set TERM
  ph data[0]=0:886a600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712be3, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712be4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712be4, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0886a800
  set TERM
  ph data[0]=0:886a800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712be4, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712be5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712be5, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0886aa00
  set TERM
  ph data[0]=0:886aa00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712be5, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712be6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712be6, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0886ac00
  set TERM
  ph data[0]=0:886ac00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712be6, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712be7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712be7, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0886ae00
  set TERM
  ph data[0]=0:886ae00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712be7, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712be8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712be8, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0886b000
  set TERM
  ph data[0]=0:886b000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712be8, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712be9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712be9, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0886b200
  set TERM
  ph data[0]=0:886b200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712be9, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bea, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bea, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0886b400
  set TERM
  ph data[0]=0:886b400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bea, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712beb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712beb, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0886b600
  set TERM
  ph data[0]=0:886b600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712beb, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bec, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bec, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0886b800
  set TERM
  ph data[0]=0:886b800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bec, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bed, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bed, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0886ba00
  set TERM
  ph data[0]=0:886ba00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bed, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bee, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bee, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0886bc00
  set TERM
  ph data[0]=0:886bc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bee, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bef, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bef, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0886be00
  set TERM
  ph data[0]=0:886be00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bef, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bf0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bf0, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0886c000
  set TERM
  ph data[0]=0:886c000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bf0, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bf1, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bf1, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0886c200
  set TERM
  ph data[0]=0:886c200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bf1, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bf2, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bf2, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0886c400
  set TERM
  ph data[0]=0:886c400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bf2, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bf3, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bf3, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0886c600
  set TERM
  ph data[0]=0:886c600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bf3, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bf4, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bf4, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0886c800
  set TERM
  ph data[0]=0:886c800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bf4, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bf5, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bf5, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0886ca00
  set TERM
  ph data[0]=0:886ca00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bf5, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bf6, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bf6, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0886cc00
  set TERM
  ph data[0]=0:886cc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bf6, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bf7, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bf7, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0886ce00
  set TERM
  ph data[0]=0:886ce00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bf7, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bf8, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bf8, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0886d000
  set TERM
  ph data[0]=0:886d000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bf8, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bf9, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bf9, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0886d200
  set TERM
  ph data[0]=0:886d200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bf9, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bfa, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bfa, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0886d400
  set TERM
  ph data[0]=0:886d400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bfa, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bfb, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bfb, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0886d600
  set TERM
  ph data[0]=0:886d600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bfb, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bfc, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bfc, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0886d800
  set TERM
  ph data[0]=0:886d800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bfc, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bfd, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bfd, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0886da00
  set TERM
  ph data[0]=0:886da00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bfd, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bfe, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bfe, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0886dc00
  set TERM
  ph data[0]=0:886dc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bfe, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712bff, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712bff, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0886de00
  set TERM
  ph data[0]=0:886de00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712bff, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c00, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c00, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0886e000
  set TERM
  ph data[0]=0:886e000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c00, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c01, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c01, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0886e200
  set TERM
  ph data[0]=0:886e200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c01, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c02, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c02, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0886e400
  set TERM
  ph data[0]=0:886e400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c02, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c03, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c03, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0886e600
  set TERM
  ph data[0]=0:886e600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c03, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c04, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c04, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0886e800
  set TERM
  ph data[0]=0:886e800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c04, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c05, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c05, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0886ea00
  set TERM
  ph data[0]=0:886ea00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c05, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c06, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c06, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0886ec00
  set TERM
  ph data[0]=0:886ec00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c06, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c07, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c07, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0886ee00
  set TERM
  ph data[0]=0:886ee00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c07, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c08, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c08, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:0886f000
  set TERM
  ph data[0]=0:886f000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c08, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c09, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c09, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:0886f200
  set TERM
  ph data[0]=0:886f200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c09, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c0a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c0a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:0886f400
  set TERM
  ph data[0]=0:886f400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c0a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c0b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c0b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:0886f600
  set TERM
  ph data[0]=0:886f600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c0b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c0c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c0c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:0886f800
  set TERM
  ph data[0]=0:886f800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c0c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c0d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c0d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:0886fa00
  set TERM
  ph data[0]=0:886fa00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c0d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c0e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c0e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:0886fc00
  set TERM
  ph data[0]=0:886fc00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c0e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c0f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c0f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:0886fe00
  set TERM
  ph data[0]=0:886fe00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c0f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c10, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c10, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08870000
  set TERM
  ph data[0]=0:8870000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c10, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c11, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c11, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08870200
  set TERM
  ph data[0]=0:8870200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c11, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c12, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c12, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08870400
  set TERM
  ph data[0]=0:8870400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c12, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c13, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c13, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08870600
  set TERM
  ph data[0]=0:8870600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c13, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c14, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c14, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08870800
  set TERM
  ph data[0]=0:8870800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c14, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c15, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c15, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08870a00
  set TERM
  ph data[0]=0:8870a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c15, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c16, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c16, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08870c00
  set TERM
  ph data[0]=0:8870c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c16, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c17, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c17, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08870e00
  set TERM
  ph data[0]=0:8870e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c17, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c18, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c18, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08871000
  set TERM
  ph data[0]=0:8871000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c18, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c19, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c19, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08871200
  set TERM
  ph data[0]=0:8871200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c19, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c1a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c1a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08871400
  set TERM
  ph data[0]=0:8871400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c1a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c1b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c1b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08871600
  set TERM
  ph data[0]=0:8871600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c1b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c1c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c1c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08871800
  set TERM
  ph data[0]=0:8871800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c1c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c1d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c1d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08871a00
  set TERM
  ph data[0]=0:8871a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c1d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c1e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c1e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08871c00
  set TERM
  ph data[0]=0:8871c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c1e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c1f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c1f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08871e00
  set TERM
  ph data[0]=0:8871e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c1f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c20, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c20, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08872000
  set TERM
  ph data[0]=0:8872000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c20, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c21, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c21, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08872200
  set TERM
  ph data[0]=0:8872200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c21, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c22, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c22, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08872400
  set TERM
  ph data[0]=0:8872400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c22, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c23, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c23, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08872600
  set TERM
  ph data[0]=0:8872600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c23, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c24, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c24, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08872800
  set TERM
  ph data[0]=0:8872800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c24, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c25, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c25, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08872a00
  set TERM
  ph data[0]=0:8872a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c25, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c26, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c26, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08872c00
  set TERM
  ph data[0]=0:8872c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c26, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c27, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c27, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08872e00
  set TERM
  ph data[0]=0:8872e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c27, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c28, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c28, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08873000
  set TERM
  ph data[0]=0:8873000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c28, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c29, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c29, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08873200
  set TERM
  ph data[0]=0:8873200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c29, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c2a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c2a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08873400
  set TERM
  ph data[0]=0:8873400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c2a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c2b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c2b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08873600
  set TERM
  ph data[0]=0:8873600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c2b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c2c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c2c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08873800
  set TERM
  ph data[0]=0:8873800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c2c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c2d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c2d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08873a00
  set TERM
  ph data[0]=0:8873a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c2d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c2e, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c2e, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08873c00
  set TERM
  ph data[0]=0:8873c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c2e, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c2f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c2f, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08873e00
  set TERM
  ph data[0]=0:8873e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c2f, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c30, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c30, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08874000
  set TERM
  ph data[0]=0:8874000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c30, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c31, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c31, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08874200
  set TERM
  ph data[0]=0:8874200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c31, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c32, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c32, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08874400
  set TERM
  ph data[0]=0:8874400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c32, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c33, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c33, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08874600
  set TERM
  ph data[0]=0:8874600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c33, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c34, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c34, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08874800
  set TERM
  ph data[0]=0:8874800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c34, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c35, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c35, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08874a00
  set TERM
  ph data[0]=0:8874a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c35, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c36, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c36, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515c00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515c00)
AtapiVirtToPhysAddr_: f7515c00 -> 00000000:08874c00
  set TERM
  ph data[0]=0:8874c00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c36, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c37, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c37, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515e00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515e00)
AtapiVirtToPhysAddr_: f7515e00 -> 00000000:08874e00
  set TERM
  ph data[0]=0:8874e00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c37, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c38, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c38, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515000)
AtapiVirtToPhysAddr_: f7515000 -> 00000000:08875000
  set TERM
  ph data[0]=0:8875000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c38, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c39, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c39, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515200, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515200)
AtapiVirtToPhysAddr_: f7515200 -> 00000000:08875200
  set TERM
  ph data[0]=0:8875200 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c39, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c3a, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c3a, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515400, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515400)
AtapiVirtToPhysAddr_: f7515400 -> 00000000:08875400
  set TERM
  ph data[0]=0:8875400 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c3a, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c3b, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c3b, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515600, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515600)
AtapiVirtToPhysAddr_: f7515600 -> 00000000:08875600
  set TERM
  ph data[0]=0:8875600 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c3b, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c3c, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c3c, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515800, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515800)
AtapiVirtToPhysAddr_: f7515800 -> 00000000:08875800
  set TERM
  ph data[0]=0:8875800 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c3c, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64be670, CDB 0xb64be6a0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb64be670
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521704
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 712c3d, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 712c3d, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7515a00, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7515a00)
AtapiVirtToPhysAddr_: f7515a00 -> 00000000:08875a00
  set TERM
  ph data[0]=0:8875a00 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x712c3d, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64be670
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64be670, status 1
AtapiInterrupt: RequestComplete, srb 0xb64be670
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64f3618, status 1
AtapiInterrupt: RequestComplete, srb 0xb64f3618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
WARNING:  IoInitializeCrashDump at ntoskrnl/io/iomgr/iomgr.c:658 is UNIMPLEMENTED!
Boot took 48062633251 cycles!
Interrupts: 61550 System Calls: 64450 Context Switches: 59503
(ntoskrnl/config/cmsysini.c:1191) CmpGetRegistryPath: ConfigPath = '\SystemRoot\System32\Config\'
(ntoskrnl/config/cmsysini.c:1191) CmpGetRegistryPath: ConfigPath = '\SystemRoot\System32\Config\'
(ntoskrnl/config/cmsysini.c:1191) CmpGetRegistryPath: ConfigPath = '\SystemRoot\System32\Config\'
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75144cc
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fb5930, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fb5930, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f74fc000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:6dc74000
  ph data[0]=0:6dc74000 (fff)
  get Phys(data[n=1+1000]=f74fd000)
AtapiVirtToPhysAddr_: f74fd000 -> 00000000:6dc75000
  set TERM
  ph data[0]=0:6dc74000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fb5930, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75144cc
** Ide: Command AtaReq 0xb6777018
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38f95990, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38f95990, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f74fe000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:6dc76000
  ph data[0]=0:6dc76000 (fff)
  get Phys(data[n=1+1000]=f74ff000)
AtapiVirtToPhysAddr_: f74ff000 -> 00000000:6dc77000
  set TERM
  ph data[0]=0:6dc76000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75144cc
** Ide: Command AtaReq 0xb677b078
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ff3fc0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38ff3fc0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7500000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7500000)
AtapiVirtToPhysAddr_: f7500000 -> 00000000:6dc78000
  ph data[0]=0:6dc78000 (fff)
  get Phys(data[n=1+1000]=f7501000)
AtapiVirtToPhysAddr_: f7501000 -> 00000000:6dc79000
  set TERM
  ph data[0]=0:6dc78000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
(ntoskrnl/config/cmsysini.c:1191) CmpGetRegistryPath: ConfigPath = '\SystemRoot\System32\Config\'
(ntoskrnl/config/cmsysini.c:1191) CmpGetRegistryPath: ConfigPath = '\SystemRoot\System32\Config\'
(ntoskrnl/config/cmsysini.c:1191) CmpGetRegistryPath: ConfigPath = '\SystemRoot\System32\Config\'
(ntoskrnl/config/cmsysini.c:1191) CmpGetRegistryPath: ConfigPath = '\SystemRoot\System32\Config\'
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb67194b8
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f95990, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb67194b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb67194b8
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ff3fc0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75144cc
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001d30, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 39001d30, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7500000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7500000)
AtapiVirtToPhysAddr_: f7500000 -> 00000000:6bbd5000
  ph data[0]=0:6bbd5000 (fff)
  get Phys(data[n=1+1000]=f7501000)
AtapiVirtToPhysAddr_: f7501000 -> 00000000:6bbce000
  set TERM
  ph data[1]=0:6bbce000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001d30, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x2, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7665468
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39609860, OrigWordsRequested 0x900, DevSize 0x9
IdeReadWrite (REQ): Starting sector is 39609860, Number of WORDS 0x900, DevSize 0x9
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7500000, count 1200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7500000)
AtapiVirtToPhysAddr_: f7500000 -> 00000000:6aecd000
  ph data[0]=0:6aecd000 (fff)
  get Phys(data[n=1+1000]=f7501000)
AtapiVirtToPhysAddr_: f7501000 -> 00000000:6aece000
  set TERM
  ph data[0]=0:6aecd000 (11ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39609860, Count 0x9(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 900, WordsLeft 900
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 1200, full size 1200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7504b54
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39003150, OrigWordsRequested 0x2000, DevSize 0x20
IdeReadWrite (REQ): Starting sector is 39003150, Number of WORDS 0x2000, DevSize 0x20
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f74fe000, count 4000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:6af0e000
  ph data[0]=0:6af0e000 (fff)
  get Phys(data[n=1+1000]=f74ff000)
AtapiVirtToPhysAddr_: f74ff000 -> 00000000:6af0f000
  ph data[0]=0:6af0e000 (1fff)
  get Phys(data[n=1+2000]=f7500000)
AtapiVirtToPhysAddr_: f7500000 -> 00000000:6af10000
  ph data[0]=0:6af0e000 (2fff)
  get Phys(data[n=1+3000]=f7501000)
AtapiVirtToPhysAddr_: f7501000 -> 00000000:6af11000
  set TERM
  ph data[0]=0:6af0e000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39003150, Count 0x20(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7508b04
** Ide: Command AtaReq 0xb6777018
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002fe0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002fe0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f74d6000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f74d6000)
AtapiVirtToPhysAddr_: f74d6000 -> 00000000:6af4f000
  ph data[0]=0:6af4f000 (fff)
  get Phys(data[n=1+1000]=f74d7000)
AtapiVirtToPhysAddr_: f74d7000 -> 00000000:6af50000
  ph data[0]=0:6af4f000 (1fff)
  get Phys(data[n=1+2000]=f74d8000)
AtapiVirtToPhysAddr_: f74d8000 -> 00000000:6af51000
  ph data[0]=0:6af4f000 (2fff)
  get Phys(data[n=1+3000]=f74d9000)
AtapiVirtToPhysAddr_: f74d9000 -> 00000000:6af4a000
  ph data[1]=0:6af4a000 (fff)
  get Phys(data[n=2+1000]=f74da000)
AtapiVirtToPhysAddr_: f74da000 -> 00000000:6af4b000
  ph data[1]=0:6af4a000 (1fff)
  get Phys(data[n=2+2000]=f74db000)
AtapiVirtToPhysAddr_: f74db000 -> 00000000:6af4c000
  ph data[1]=0:6af4a000 (2fff)
  get Phys(data[n=2+3000]=f74dc000)
AtapiVirtToPhysAddr_: f74dc000 -> 00000000:6af4d000
  ph data[1]=0:6af4a000 (3fff)
  get Phys(data[n=2+4000]=f74dd000)
AtapiVirtToPhysAddr_: f74dd000 -> 00000000:6af4e000
  ph data[1]=0:6af4a000 (4fff)
  get Phys(data[n=2+5000]=f74de000)
AtapiVirtToPhysAddr_: f74de000 -> 00000000:6af57000
  ph data[2]=0:6af57000 (fff)
  get Phys(data[n=3+1000]=f74df000)
AtapiVirtToPhysAddr_: f74df000 -> 00000000:6af58000
  ph data[2]=0:6af57000 (1fff)
  get Phys(data[n=3+2000]=f74e0000)
AtapiVirtToPhysAddr_: f74e0000 -> 00000000:6af59000
  ph data[2]=0:6af57000 (2fff)
  get Phys(data[n=3+3000]=f74e1000)
AtapiVirtToPhysAddr_: f74e1000 -> 00000000:6af52000
  ph data[3]=0:6af52000 (fff)
  get Phys(data[n=4+1000]=f74e2000)
AtapiVirtToPhysAddr_: f74e2000 -> 00000000:6af53000
  ph data[3]=0:6af52000 (1fff)
  get Phys(data[n=4+2000]=f74e3000)
AtapiVirtToPhysAddr_: f74e3000 -> 00000000:6af54000
  ph data[3]=0:6af52000 (2fff)
  get Phys(data[n=4+3000]=f74e4000)
AtapiVirtToPhysAddr_: f74e4000 -> 00000000:6af55000
  ph data[3]=0:6af52000 (3fff)
  get Phys(data[n=4+4000]=f74e5000)
AtapiVirtToPhysAddr_: f74e5000 -> 00000000:6af56000
  set TERM
  ph data[3]=0:6af52000 (4fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7508b04
** Ide: Command AtaReq 0xb6779048
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39003060, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39003060, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f74e6000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f74e6000)
AtapiVirtToPhysAddr_: f74e6000 -> 00000000:6af5f000
  ph data[0]=0:6af5f000 (fff)
  get Phys(data[n=1+1000]=f74e7000)
AtapiVirtToPhysAddr_: f74e7000 -> 00000000:6af60000
  ph data[0]=0:6af5f000 (1fff)
  get Phys(data[n=1+2000]=f74e8000)
AtapiVirtToPhysAddr_: f74e8000 -> 00000000:6af61000
  ph data[0]=0:6af5f000 (2fff)
  get Phys(data[n=1+3000]=f74e9000)
AtapiVirtToPhysAddr_: f74e9000 -> 00000000:6af5a000
  ph data[1]=0:6af5a000 (fff)
  get Phys(data[n=2+1000]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:6af5b000
  ph data[1]=0:6af5a000 (1fff)
  get Phys(data[n=2+2000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:6af5c000
  ph data[1]=0:6af5a000 (2fff)
  get Phys(data[n=2+3000]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:6af5d000
  ph data[1]=0:6af5a000 (3fff)
  get Phys(data[n=2+4000]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:6af5e000
  ph data[1]=0:6af5a000 (4fff)
  get Phys(data[n=2+5000]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:6af67000
  ph data[2]=0:6af67000 (fff)
  get Phys(data[n=3+1000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:6af68000
  ph data[2]=0:6af67000 (1fff)
  get Phys(data[n=3+2000]=f74f0000)
AtapiVirtToPhysAddr_: f74f0000 -> 00000000:6af69000
  ph data[2]=0:6af67000 (2fff)
  get Phys(data[n=3+3000]=f74f1000)
AtapiVirtToPhysAddr_: f74f1000 -> 00000000:6af62000
  ph data[3]=0:6af62000 (fff)
  get Phys(data[n=4+1000]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:6af63000
  ph data[3]=0:6af62000 (1fff)
  get Phys(data[n=4+2000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:6af64000
  ph data[3]=0:6af62000 (2fff)
  get Phys(data[n=4+3000]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:6af65000
  ph data[3]=0:6af62000 (3fff)
  get Phys(data[n=4+4000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:6af66000
  set TERM
  ph data[3]=0:6af62000 (4fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64ca720, CDB 0xb64ca750, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7508b04
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390030e0, OrigWordsRequested 0x3800, DevSize 0x38
IdeReadWrite (REQ): Starting sector is 390030e0, Number of WORDS 0x3800, DevSize 0x38
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f74f6000, count 7000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:6af6f000
  ph data[0]=0:6af6f000 (fff)
  get Phys(data[n=1+1000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:6af70000
  ph data[0]=0:6af6f000 (1fff)
  get Phys(data[n=1+2000]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:6af71000
  ph data[0]=0:6af6f000 (2fff)
  get Phys(data[n=1+3000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:6af6a000
  ph data[1]=0:6af6a000 (fff)
  get Phys(data[n=2+1000]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:6af6b000
  ph data[1]=0:6af6a000 (1fff)
  get Phys(data[n=2+2000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:6af6c000
  ph data[1]=0:6af6a000 (2fff)
  get Phys(data[n=2+3000]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:6af6d000
  set TERM
  ph data[1]=0:6af6a000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b64ca720
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64f3618, CDB 0xb64f3648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=4
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b04
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002290, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002290, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7447000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7447000)
AtapiVirtToPhysAddr_: f7447000 -> 00000000:6af90000
  ph data[0]=0:6af90000 (fff)
  get Phys(data[n=1+1000]=f7448000)
AtapiVirtToPhysAddr_: f7448000 -> 00000000:6af91000
  ph data[0]=0:6af90000 (1fff)
  get Phys(data[n=1+2000]=f7449000)
AtapiVirtToPhysAddr_: f7449000 -> 00000000:6af8a000
  ph data[1]=0:6af8a000 (fff)
  get Phys(data[n=2+1000]=f744a000)
AtapiVirtToPhysAddr_: f744a000 -> 00000000:6af8b000
  ph data[1]=0:6af8a000 (1fff)
  get Phys(data[n=2+2000]=f744b000)
AtapiVirtToPhysAddr_: f744b000 -> 00000000:6af8c000
  ph data[1]=0:6af8a000 (2fff)
  get Phys(data[n=2+3000]=f744c000)
AtapiVirtToPhysAddr_: f744c000 -> 00000000:6af8d000
  ph data[1]=0:6af8a000 (3fff)
  get Phys(data[n=2+4000]=f744d000)
AtapiVirtToPhysAddr_: f744d000 -> 00000000:6af8e000
  ph data[1]=0:6af8a000 (4fff)
  get Phys(data[n=2+5000]=f744e000)
AtapiVirtToPhysAddr_: f744e000 -> 00000000:6af8f000
  ph data[1]=0:6af8a000 (5fff)
  get Phys(data[n=2+6000]=f744f000)
AtapiVirtToPhysAddr_: f744f000 -> 00000000:6af98000
  ph data[2]=0:6af98000 (fff)
  get Phys(data[n=3+1000]=f7450000)
AtapiVirtToPhysAddr_: f7450000 -> 00000000:6af99000
  ph data[2]=0:6af98000 (1fff)
  get Phys(data[n=3+2000]=f7451000)
AtapiVirtToPhysAddr_: f7451000 -> 00000000:6af92000
  ph data[3]=0:6af92000 (fff)
  get Phys(data[n=4+1000]=f7452000)
AtapiVirtToPhysAddr_: f7452000 -> 00000000:6af93000
  ph data[3]=0:6af92000 (1fff)
  get Phys(data[n=4+2000]=f7453000)
AtapiVirtToPhysAddr_: f7453000 -> 00000000:6af94000
  ph data[3]=0:6af92000 (2fff)
  get Phys(data[n=4+3000]=f7454000)
AtapiVirtToPhysAddr_: f7454000 -> 00000000:6af95000
  ph data[3]=0:6af92000 (3fff)
  get Phys(data[n=4+4000]=f7455000)
AtapiVirtToPhysAddr_: f7455000 -> 00000000:6af96000
  ph data[3]=0:6af92000 (4fff)
  get Phys(data[n=4+5000]=f7456000)
AtapiVirtToPhysAddr_: f7456000 -> 00000000:6af97000
  set TERM
  ph data[3]=0:6af92000 (5fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 5 request(s)!
AtapiStartIo: next Srb b64f3618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6484618, CDB 0xb6484648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=5
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b04
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002310, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002310, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7457000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7457000)
AtapiVirtToPhysAddr_: f7457000 -> 00000000:6afa0000
  ph data[0]=0:6afa0000 (fff)
  get Phys(data[n=1+1000]=f7458000)
AtapiVirtToPhysAddr_: f7458000 -> 00000000:6afa1000
  ph data[0]=0:6afa0000 (1fff)
  get Phys(data[n=1+2000]=f7459000)
AtapiVirtToPhysAddr_: f7459000 -> 00000000:6af9a000
  ph data[1]=0:6af9a000 (fff)
  get Phys(data[n=2+1000]=f745a000)
AtapiVirtToPhysAddr_: f745a000 -> 00000000:6af9b000
  ph data[1]=0:6af9a000 (1fff)
  get Phys(data[n=2+2000]=f745b000)
AtapiVirtToPhysAddr_: f745b000 -> 00000000:6af9c000
  ph data[1]=0:6af9a000 (2fff)
  get Phys(data[n=2+3000]=f745c000)
AtapiVirtToPhysAddr_: f745c000 -> 00000000:6af9d000
  ph data[1]=0:6af9a000 (3fff)
  get Phys(data[n=2+4000]=f745d000)
AtapiVirtToPhysAddr_: f745d000 -> 00000000:6af9e000
  ph data[1]=0:6af9a000 (4fff)
  get Phys(data[n=2+5000]=f745e000)
AtapiVirtToPhysAddr_: f745e000 -> 00000000:6af9f000
  ph data[1]=0:6af9a000 (5fff)
  get Phys(data[n=2+6000]=f745f000)
AtapiVirtToPhysAddr_: f745f000 -> 00000000:6afa8000
  ph data[2]=0:6afa8000 (fff)
  get Phys(data[n=3+1000]=f7460000)
AtapiVirtToPhysAddr_: f7460000 -> 00000000:6afa9000
  ph data[2]=0:6afa8000 (1fff)
  get Phys(data[n=3+2000]=f7461000)
AtapiVirtToPhysAddr_: f7461000 -> 00000000:6afa2000
  ph data[3]=0:6afa2000 (fff)
  get Phys(data[n=4+1000]=f7462000)
AtapiVirtToPhysAddr_: f7462000 -> 00000000:6afa3000
  ph data[3]=0:6afa2000 (1fff)
  get Phys(data[n=4+2000]=f7463000)
AtapiVirtToPhysAddr_: f7463000 -> 00000000:6afa4000
  ph data[3]=0:6afa2000 (2fff)
  get Phys(data[n=4+3000]=f7464000)
AtapiVirtToPhysAddr_: f7464000 -> 00000000:6afa5000
  ph data[3]=0:6afa2000 (3fff)
  get Phys(data[n=4+4000]=f7465000)
AtapiVirtToPhysAddr_: f7465000 -> 00000000:6afa6000
  ph data[3]=0:6afa2000 (4fff)
  get Phys(data[n=4+5000]=f7466000)
AtapiVirtToPhysAddr_: f7466000 -> 00000000:6afa7000
  set TERM
  ph data[3]=0:6afa2000 (5fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 6 request(s)!
AtapiStartIo: next Srb b6484618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6483618, CDB 0xb6483648, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=6
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b04
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002390, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002390, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7467000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7467000)
AtapiVirtToPhysAddr_: f7467000 -> 00000000:6afb0000
  ph data[0]=0:6afb0000 (fff)
  get Phys(data[n=1+1000]=f7468000)
AtapiVirtToPhysAddr_: f7468000 -> 00000000:6afb1000
  ph data[0]=0:6afb0000 (1fff)
  get Phys(data[n=1+2000]=f7469000)
AtapiVirtToPhysAddr_: f7469000 -> 00000000:6afaa000
  ph data[1]=0:6afaa000 (fff)
  get Phys(data[n=2+1000]=f746a000)
AtapiVirtToPhysAddr_: f746a000 -> 00000000:6afab000
  ph data[1]=0:6afaa000 (1fff)
  get Phys(data[n=2+2000]=f746b000)
AtapiVirtToPhysAddr_: f746b000 -> 00000000:6afac000
  ph data[1]=0:6afaa000 (2fff)
  get Phys(data[n=2+3000]=f746c000)
AtapiVirtToPhysAddr_: f746c000 -> 00000000:6afad000
  ph data[1]=0:6afaa000 (3fff)
  get Phys(data[n=2+4000]=f746d000)
AtapiVirtToPhysAddr_: f746d000 -> 00000000:6afae000
  ph data[1]=0:6afaa000 (4fff)
  get Phys(data[n=2+5000]=f746e000)
AtapiVirtToPhysAddr_: f746e000 -> 00000000:6afaf000
  ph data[1]=0:6afaa000 (5fff)
  get Phys(data[n=2+6000]=f746f000)
AtapiVirtToPhysAddr_: f746f000 -> 00000000:6afb8000
  ph data[2]=0:6afb8000 (fff)
  get Phys(data[n=3+1000]=f7470000)
AtapiVirtToPhysAddr_: f7470000 -> 00000000:6afb9000
  ph data[2]=0:6afb8000 (1fff)
  get Phys(data[n=3+2000]=f7471000)
AtapiVirtToPhysAddr_: f7471000 -> 00000000:6afb2000
  ph data[3]=0:6afb2000 (fff)
  get Phys(data[n=4+1000]=f7472000)
AtapiVirtToPhysAddr_: f7472000 -> 00000000:6afb3000
  ph data[3]=0:6afb2000 (1fff)
  get Phys(data[n=4+2000]=f7473000)
AtapiVirtToPhysAddr_: f7473000 -> 00000000:6afb4000
  ph data[3]=0:6afb2000 (2fff)
  get Phys(data[n=4+3000]=f7474000)
AtapiVirtToPhysAddr_: f7474000 -> 00000000:6afb5000
  ph data[3]=0:6afb2000 (3fff)
  get Phys(data[n=4+4000]=f7475000)
AtapiVirtToPhysAddr_: f7475000 -> 00000000:6afb6000
  ph data[3]=0:6afb2000 (4fff)
  get Phys(data[n=4+5000]=f7476000)
AtapiVirtToPhysAddr_: f7476000 -> 00000000:6afb7000
  set TERM
  ph data[3]=0:6afb2000 (5fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 7 request(s)!
AtapiStartIo: next Srb b6483618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6482618, CDB 0xb6482648, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=7
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b04
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002410, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002410, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7477000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7477000)
AtapiVirtToPhysAddr_: f7477000 -> 00000000:6afc0000
  ph data[0]=0:6afc0000 (fff)
  get Phys(data[n=1+1000]=f7478000)
AtapiVirtToPhysAddr_: f7478000 -> 00000000:6afc1000
  ph data[0]=0:6afc0000 (1fff)
  get Phys(data[n=1+2000]=f7479000)
AtapiVirtToPhysAddr_: f7479000 -> 00000000:6afba000
  ph data[1]=0:6afba000 (fff)
  get Phys(data[n=2+1000]=f747a000)
AtapiVirtToPhysAddr_: f747a000 -> 00000000:6afbb000
  ph data[1]=0:6afba000 (1fff)
  get Phys(data[n=2+2000]=f747b000)
AtapiVirtToPhysAddr_: f747b000 -> 00000000:6afbc000
  ph data[1]=0:6afba000 (2fff)
  get Phys(data[n=2+3000]=f747c000)
AtapiVirtToPhysAddr_: f747c000 -> 00000000:6afbd000
  ph data[1]=0:6afba000 (3fff)
  get Phys(data[n=2+4000]=f747d000)
AtapiVirtToPhysAddr_: f747d000 -> 00000000:6afbe000
  ph data[1]=0:6afba000 (4fff)
  get Phys(data[n=2+5000]=f747e000)
AtapiVirtToPhysAddr_: f747e000 -> 00000000:6afbf000
  ph data[1]=0:6afba000 (5fff)
  get Phys(data[n=2+6000]=f747f000)
AtapiVirtToPhysAddr_: f747f000 -> 00000000:6afc8000
  ph data[2]=0:6afc8000 (fff)
  get Phys(data[n=3+1000]=f7480000)
AtapiVirtToPhysAddr_: f7480000 -> 00000000:6afc9000
  ph data[2]=0:6afc8000 (1fff)
  get Phys(data[n=3+2000]=f7481000)
AtapiVirtToPhysAddr_: f7481000 -> 00000000:6afc2000
  ph data[3]=0:6afc2000 (fff)
  get Phys(data[n=4+1000]=f7482000)
AtapiVirtToPhysAddr_: f7482000 -> 00000000:6afc3000
  ph data[3]=0:6afc2000 (1fff)
  get Phys(data[n=4+2000]=f7483000)
AtapiVirtToPhysAddr_: f7483000 -> 00000000:6afc4000
  ph data[3]=0:6afc2000 (2fff)
  get Phys(data[n=4+3000]=f7484000)
AtapiVirtToPhysAddr_: f7484000 -> 00000000:6afc5000
  ph data[3]=0:6afc2000 (3fff)
  get Phys(data[n=4+4000]=f7485000)
AtapiVirtToPhysAddr_: f7485000 -> 00000000:6afc6000
  ph data[3]=0:6afc2000 (4fff)
  get Phys(data[n=4+5000]=f7486000)
AtapiVirtToPhysAddr_: f7486000 -> 00000000:6afc7000
  set TERM
  ph data[3]=0:6afc2000 (5fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 8 request(s)!
AtapiStartIo: next Srb b6482618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677e0c0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=8
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7514b54
** Ide: Command AtaReq 0xb677e0c0
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39003120, OrigWordsRequested 0x2800, DevSize 0x28
IdeReadWrite (REQ): Starting sector is 39003120, Number of WORDS 0x2800, DevSize 0x28
  AtaReq 0xb677e0c0: cmd aligned b677e180, d=60
  ahci_cmd_ptr 0xb677e180
AtapiDmaSetup: mode 0x0, data f7441000, count 5000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677e180)
AtapiVirtToPhysAddr_: b677e180 -> 00000000:08e41180
  get Phys(data[0]=f7441000)
AtapiVirtToPhysAddr_: f7441000 -> 00000000:6afd1000
  ph data[0]=0:6afd1000 (fff)
  get Phys(data[n=1+1000]=f7442000)
AtapiVirtToPhysAddr_: f7442000 -> 00000000:6afca000
  ph data[1]=0:6afca000 (fff)
  get Phys(data[n=2+1000]=f7443000)
AtapiVirtToPhysAddr_: f7443000 -> 00000000:6afcb000
  ph data[1]=0:6afca000 (1fff)
  get Phys(data[n=2+2000]=f7444000)
AtapiVirtToPhysAddr_: f7444000 -> 00000000:6afcc000
  ph data[1]=0:6afca000 (2fff)
  get Phys(data[n=2+3000]=f7445000)
AtapiVirtToPhysAddr_: f7445000 -> 00000000:6afcd000
  set TERM
  ph data[1]=0:6afca000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677e180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 9 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 2000, WordsLeft 2000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 4000, full size 4000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677e0c0, SCmd 0x28
UniataNeedQueueing: qd=8
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677e0c0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39003120, Count 0x28(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677e0c0
  AHCI AtaReq CMD 0xb677e180 (ph 0x8e41180)
  prd_length 0x2, flags 0x5, base 8e41180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 2800, WordsLeft 2800
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 5000, full size 5000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb67194b8
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: qd=7
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801988
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002fe0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x4, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
(ntoskrnl/config/cmcheck.c:25) CmCheckRegistry(0xB61B6008, 0) is UNIMPLEMENTED!
(ntoskrnl/config/cmcheck.c:25) CmCheckRegistry(0xB61B9008, 0) is UNIMPLEMENTED!
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb67194b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb67194b8
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: qd=6
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39003060, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x4, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb64ca720
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64ca720, CDB 0xb64ca750, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=5
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390030e0, Count 0x38(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x2, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64ca720
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 3800, WordsLeft 3800
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 7000, full size 7000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64ca720, status 1
AtapiInterrupt: RequestComplete, srb 0xb64ca720
AtapiInterrupt: NextRequest, srb=0xb64f3618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64f3618, CDB 0xb64f3648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=4
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002290, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64f3618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
(ntoskrnl/config/cmcheck.c:25) CmCheckRegistry(0xB61B8008, 0) is UNIMPLEMENTED!
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64f3618, status 1
AtapiInterrupt: RequestComplete, srb 0xb64f3618
AtapiInterrupt: NextRequest, srb=0xb6484618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6484618, CDB 0xb6484648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002310, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6484618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6484618, status 1
AtapiInterrupt: RequestComplete, srb 0xb6484618
AtapiInterrupt: NextRequest, srb=0xb6483618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6483618, CDB 0xb6483648, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002390, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6483618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6483618, status 1
AtapiInterrupt: RequestComplete, srb 0xb6483618
AtapiInterrupt: NextRequest, srb=0xb6482618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6482618, CDB 0xb6482648, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002410, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6482618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6482618, status 1
AtapiInterrupt: RequestComplete, srb 0xb6482618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b3c
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002490, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002490, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7447000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7447000)
AtapiVirtToPhysAddr_: f7447000 -> 00000000:6956b000
  ph data[0]=0:6956b000 (fff)
  get Phys(data[n=1+1000]=f7448000)
AtapiVirtToPhysAddr_: f7448000 -> 00000000:6956c000
  ph data[0]=0:6956b000 (1fff)
  get Phys(data[n=1+2000]=f7449000)
AtapiVirtToPhysAddr_: f7449000 -> 00000000:6956d000
  ph data[0]=0:6956b000 (2fff)
  get Phys(data[n=1+3000]=f744a000)
AtapiVirtToPhysAddr_: f744a000 -> 00000000:6956e000
  ph data[0]=0:6956b000 (3fff)
  get Phys(data[n=1+4000]=f744b000)
AtapiVirtToPhysAddr_: f744b000 -> 00000000:6956f000
  ph data[0]=0:6956b000 (4fff)
  get Phys(data[n=1+5000]=f744c000)
AtapiVirtToPhysAddr_: f744c000 -> 00000000:69570000
  ph data[0]=0:6956b000 (5fff)
  get Phys(data[n=1+6000]=f744d000)
AtapiVirtToPhysAddr_: f744d000 -> 00000000:69569000
  ph data[1]=0:69569000 (fff)
  get Phys(data[n=2+1000]=f744e000)
AtapiVirtToPhysAddr_: f744e000 -> 00000000:6956a000
  ph data[1]=0:69569000 (1fff)
  get Phys(data[n=2+2000]=f744f000)
AtapiVirtToPhysAddr_: f744f000 -> 00000000:69573000
  ph data[2]=0:69573000 (fff)
  get Phys(data[n=3+1000]=f7450000)
AtapiVirtToPhysAddr_: f7450000 -> 00000000:69574000
  ph data[2]=0:69573000 (1fff)
  get Phys(data[n=3+2000]=f7451000)
AtapiVirtToPhysAddr_: f7451000 -> 00000000:69575000
  ph data[2]=0:69573000 (2fff)
  get Phys(data[n=3+3000]=f7452000)
AtapiVirtToPhysAddr_: f7452000 -> 00000000:69576000
  ph data[2]=0:69573000 (3fff)
  get Phys(data[n=3+4000]=f7453000)
AtapiVirtToPhysAddr_: f7453000 -> 00000000:69577000
  ph data[2]=0:69573000 (4fff)
  get Phys(data[n=3+5000]=f7454000)
AtapiVirtToPhysAddr_: f7454000 -> 00000000:69578000
  ph data[2]=0:69573000 (5fff)
  get Phys(data[n=3+6000]=f7455000)
AtapiVirtToPhysAddr_: f7455000 -> 00000000:69571000
  ph data[3]=0:69571000 (fff)
  get Phys(data[n=4+1000]=f7456000)
AtapiVirtToPhysAddr_: f7456000 -> 00000000:69572000
  set TERM
  ph data[3]=0:69571000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002490, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b3c
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002510, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002510, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7457000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7457000)
AtapiVirtToPhysAddr_: f7457000 -> 00000000:6957b000
  ph data[0]=0:6957b000 (fff)
  get Phys(data[n=1+1000]=f7458000)
AtapiVirtToPhysAddr_: f7458000 -> 00000000:6957c000
  ph data[0]=0:6957b000 (1fff)
  get Phys(data[n=1+2000]=f7459000)
AtapiVirtToPhysAddr_: f7459000 -> 00000000:6957d000
  ph data[0]=0:6957b000 (2fff)
  get Phys(data[n=1+3000]=f745a000)
AtapiVirtToPhysAddr_: f745a000 -> 00000000:6957e000
  ph data[0]=0:6957b000 (3fff)
  get Phys(data[n=1+4000]=f745b000)
AtapiVirtToPhysAddr_: f745b000 -> 00000000:6957f000
  ph data[0]=0:6957b000 (4fff)
  get Phys(data[n=1+5000]=f745c000)
AtapiVirtToPhysAddr_: f745c000 -> 00000000:69580000
  ph data[0]=0:6957b000 (5fff)
  get Phys(data[n=1+6000]=f745d000)
AtapiVirtToPhysAddr_: f745d000 -> 00000000:69579000
  ph data[1]=0:69579000 (fff)
  get Phys(data[n=2+1000]=f745e000)
AtapiVirtToPhysAddr_: f745e000 -> 00000000:6957a000
  ph data[1]=0:69579000 (1fff)
  get Phys(data[n=2+2000]=f745f000)
AtapiVirtToPhysAddr_: f745f000 -> 00000000:69583000
  ph data[2]=0:69583000 (fff)
  get Phys(data[n=3+1000]=f7460000)
AtapiVirtToPhysAddr_: f7460000 -> 00000000:69584000
  ph data[2]=0:69583000 (1fff)
  get Phys(data[n=3+2000]=f7461000)
AtapiVirtToPhysAddr_: f7461000 -> 00000000:69585000
  ph data[2]=0:69583000 (2fff)
  get Phys(data[n=3+3000]=f7462000)
AtapiVirtToPhysAddr_: f7462000 -> 00000000:69586000
  ph data[2]=0:69583000 (3fff)
  get Phys(data[n=3+4000]=f7463000)
AtapiVirtToPhysAddr_: f7463000 -> 00000000:69587000
  ph data[2]=0:69583000 (4fff)
  get Phys(data[n=3+5000]=f7464000)
AtapiVirtToPhysAddr_: f7464000 -> 00000000:69588000
  ph data[2]=0:69583000 (5fff)
  get Phys(data[n=3+6000]=f7465000)
AtapiVirtToPhysAddr_: f7465000 -> 00000000:69581000
  ph data[3]=0:69581000 (fff)
  get Phys(data[n=4+1000]=f7466000)
AtapiVirtToPhysAddr_: f7466000 -> 00000000:69582000
  set TERM
  ph data[3]=0:69581000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b3c
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002590, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002590, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7467000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7467000)
AtapiVirtToPhysAddr_: f7467000 -> 00000000:6958b000
  ph data[0]=0:6958b000 (fff)
  get Phys(data[n=1+1000]=f7468000)
AtapiVirtToPhysAddr_: f7468000 -> 00000000:6958c000
  ph data[0]=0:6958b000 (1fff)
  get Phys(data[n=1+2000]=f7469000)
AtapiVirtToPhysAddr_: f7469000 -> 00000000:6958d000
  ph data[0]=0:6958b000 (2fff)
  get Phys(data[n=1+3000]=f746a000)
AtapiVirtToPhysAddr_: f746a000 -> 00000000:6958e000
  ph data[0]=0:6958b000 (3fff)
  get Phys(data[n=1+4000]=f746b000)
AtapiVirtToPhysAddr_: f746b000 -> 00000000:6958f000
  ph data[0]=0:6958b000 (4fff)
  get Phys(data[n=1+5000]=f746c000)
AtapiVirtToPhysAddr_: f746c000 -> 00000000:69590000
  ph data[0]=0:6958b000 (5fff)
  get Phys(data[n=1+6000]=f746d000)
AtapiVirtToPhysAddr_: f746d000 -> 00000000:69589000
  ph data[1]=0:69589000 (fff)
  get Phys(data[n=2+1000]=f746e000)
AtapiVirtToPhysAddr_: f746e000 -> 00000000:6958a000
  ph data[1]=0:69589000 (1fff)
  get Phys(data[n=2+2000]=f746f000)
AtapiVirtToPhysAddr_: f746f000 -> 00000000:69593000
  ph data[2]=0:69593000 (fff)
  get Phys(data[n=3+1000]=f7470000)
AtapiVirtToPhysAddr_: f7470000 -> 00000000:69594000
  ph data[2]=0:69593000 (1fff)
  get Phys(data[n=3+2000]=f7471000)
AtapiVirtToPhysAddr_: f7471000 -> 00000000:69595000
  ph data[2]=0:69593000 (2fff)
  get Phys(data[n=3+3000]=f7472000)
AtapiVirtToPhysAddr_: f7472000 -> 00000000:69596000
  ph data[2]=0:69593000 (3fff)
  get Phys(data[n=3+4000]=f7473000)
AtapiVirtToPhysAddr_: f7473000 -> 00000000:69597000
  ph data[2]=0:69593000 (4fff)
  get Phys(data[n=3+5000]=f7474000)
AtapiVirtToPhysAddr_: f7474000 -> 00000000:69598000
  ph data[2]=0:69593000 (5fff)
  get Phys(data[n=3+6000]=f7475000)
AtapiVirtToPhysAddr_: f7475000 -> 00000000:69591000
  ph data[3]=0:69591000 (fff)
  get Phys(data[n=4+1000]=f7476000)
AtapiVirtToPhysAddr_: f7476000 -> 00000000:69592000
  set TERM
  ph data[3]=0:69591000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb67194b8
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510a08
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002510, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b3c
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002610, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002610, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7477000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7477000)
AtapiVirtToPhysAddr_: f7477000 -> 00000000:6959b000
  ph data[0]=0:6959b000 (fff)
  get Phys(data[n=1+1000]=f7478000)
AtapiVirtToPhysAddr_: f7478000 -> 00000000:6959c000
  ph data[0]=0:6959b000 (1fff)
  get Phys(data[n=1+2000]=f7479000)
AtapiVirtToPhysAddr_: f7479000 -> 00000000:6959d000
  ph data[0]=0:6959b000 (2fff)
  get Phys(data[n=1+3000]=f747a000)
AtapiVirtToPhysAddr_: f747a000 -> 00000000:6959e000
  ph data[0]=0:6959b000 (3fff)
  get Phys(data[n=1+4000]=f747b000)
AtapiVirtToPhysAddr_: f747b000 -> 00000000:6959f000
  ph data[0]=0:6959b000 (4fff)
  get Phys(data[n=1+5000]=f747c000)
AtapiVirtToPhysAddr_: f747c000 -> 00000000:695a0000
  ph data[0]=0:6959b000 (5fff)
  get Phys(data[n=1+6000]=f747d000)
AtapiVirtToPhysAddr_: f747d000 -> 00000000:69599000
  ph data[1]=0:69599000 (fff)
  get Phys(data[n=2+1000]=f747e000)
AtapiVirtToPhysAddr_: f747e000 -> 00000000:6959a000
  ph data[1]=0:69599000 (1fff)
  get Phys(data[n=2+2000]=f747f000)
AtapiVirtToPhysAddr_: f747f000 -> 00000000:695a3000
  ph data[2]=0:695a3000 (fff)
  get Phys(data[n=3+1000]=f7480000)
AtapiVirtToPhysAddr_: f7480000 -> 00000000:695a4000
  ph data[2]=0:695a3000 (1fff)
  get Phys(data[n=3+2000]=f7481000)
AtapiVirtToPhysAddr_: f7481000 -> 00000000:695a5000
  ph data[2]=0:695a3000 (2fff)
  get Phys(data[n=3+3000]=f7482000)
AtapiVirtToPhysAddr_: f7482000 -> 00000000:695a6000
  ph data[2]=0:695a3000 (3fff)
  get Phys(data[n=3+4000]=f7483000)
AtapiVirtToPhysAddr_: f7483000 -> 00000000:695a7000
  ph data[2]=0:695a3000 (4fff)
  get Phys(data[n=3+5000]=f7484000)
AtapiVirtToPhysAddr_: f7484000 -> 00000000:695a8000
  ph data[2]=0:695a3000 (5fff)
  get Phys(data[n=3+6000]=f7485000)
AtapiVirtToPhysAddr_: f7485000 -> 00000000:695a1000
  ph data[3]=0:695a1000 (fff)
  get Phys(data[n=4+1000]=f7486000)
AtapiVirtToPhysAddr_: f7486000 -> 00000000:695a2000
  set TERM
  ph data[3]=0:695a1000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb67194b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb67194b8
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002590, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002610, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b3c
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002690, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002690, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7447000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7447000)
AtapiVirtToPhysAddr_: f7447000 -> 00000000:692ab000
  ph data[0]=0:692ab000 (fff)
  get Phys(data[n=1+1000]=f7448000)
AtapiVirtToPhysAddr_: f7448000 -> 00000000:692ac000
  ph data[0]=0:692ab000 (1fff)
  get Phys(data[n=1+2000]=f7449000)
AtapiVirtToPhysAddr_: f7449000 -> 00000000:692ad000
  ph data[0]=0:692ab000 (2fff)
  get Phys(data[n=1+3000]=f744a000)
AtapiVirtToPhysAddr_: f744a000 -> 00000000:692ae000
  ph data[0]=0:692ab000 (3fff)
  get Phys(data[n=1+4000]=f744b000)
AtapiVirtToPhysAddr_: f744b000 -> 00000000:692af000
  ph data[0]=0:692ab000 (4fff)
  get Phys(data[n=1+5000]=f744c000)
AtapiVirtToPhysAddr_: f744c000 -> 00000000:692b0000
  ph data[0]=0:692ab000 (5fff)
  get Phys(data[n=1+6000]=f744d000)
AtapiVirtToPhysAddr_: f744d000 -> 00000000:692b1000
  ph data[0]=0:692ab000 (6fff)
  get Phys(data[n=1+7000]=f744e000)
AtapiVirtToPhysAddr_: f744e000 -> 00000000:692aa000
  ph data[1]=0:692aa000 (fff)
  get Phys(data[n=2+1000]=f744f000)
AtapiVirtToPhysAddr_: f744f000 -> 00000000:692b3000
  ph data[2]=0:692b3000 (fff)
  get Phys(data[n=3+1000]=f7450000)
AtapiVirtToPhysAddr_: f7450000 -> 00000000:692b4000
  ph data[2]=0:692b3000 (1fff)
  get Phys(data[n=3+2000]=f7451000)
AtapiVirtToPhysAddr_: f7451000 -> 00000000:692b5000
  ph data[2]=0:692b3000 (2fff)
  get Phys(data[n=3+3000]=f7452000)
AtapiVirtToPhysAddr_: f7452000 -> 00000000:692b6000
  ph data[2]=0:692b3000 (3fff)
  get Phys(data[n=3+4000]=f7453000)
AtapiVirtToPhysAddr_: f7453000 -> 00000000:692b7000
  ph data[2]=0:692b3000 (4fff)
  get Phys(data[n=3+5000]=f7454000)
AtapiVirtToPhysAddr_: f7454000 -> 00000000:692b8000
  ph data[2]=0:692b3000 (5fff)
  get Phys(data[n=3+6000]=f7455000)
AtapiVirtToPhysAddr_: f7455000 -> 00000000:692b9000
  ph data[2]=0:692b3000 (6fff)
  get Phys(data[n=3+7000]=f7456000)
AtapiVirtToPhysAddr_: f7456000 -> 00000000:692b2000
  set TERM
  ph data[3]=0:692b2000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002690, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b3c
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002710, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002710, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7457000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7457000)
AtapiVirtToPhysAddr_: f7457000 -> 00000000:692bb000
  ph data[0]=0:692bb000 (fff)
  get Phys(data[n=1+1000]=f7458000)
AtapiVirtToPhysAddr_: f7458000 -> 00000000:692bc000
  ph data[0]=0:692bb000 (1fff)
  get Phys(data[n=1+2000]=f7459000)
AtapiVirtToPhysAddr_: f7459000 -> 00000000:692bd000
  ph data[0]=0:692bb000 (2fff)
  get Phys(data[n=1+3000]=f745a000)
AtapiVirtToPhysAddr_: f745a000 -> 00000000:692be000
  ph data[0]=0:692bb000 (3fff)
  get Phys(data[n=1+4000]=f745b000)
AtapiVirtToPhysAddr_: f745b000 -> 00000000:692bf000
  ph data[0]=0:692bb000 (4fff)
  get Phys(data[n=1+5000]=f745c000)
AtapiVirtToPhysAddr_: f745c000 -> 00000000:692c0000
  ph data[0]=0:692bb000 (5fff)
  get Phys(data[n=1+6000]=f745d000)
AtapiVirtToPhysAddr_: f745d000 -> 00000000:692c1000
  ph data[0]=0:692bb000 (6fff)
  get Phys(data[n=1+7000]=f745e000)
AtapiVirtToPhysAddr_: f745e000 -> 00000000:692ba000
  ph data[1]=0:692ba000 (fff)
  get Phys(data[n=2+1000]=f745f000)
AtapiVirtToPhysAddr_: f745f000 -> 00000000:692c3000
  ph data[2]=0:692c3000 (fff)
  get Phys(data[n=3+1000]=f7460000)
AtapiVirtToPhysAddr_: f7460000 -> 00000000:692c4000
  ph data[2]=0:692c3000 (1fff)
  get Phys(data[n=3+2000]=f7461000)
AtapiVirtToPhysAddr_: f7461000 -> 00000000:692c5000
  ph data[2]=0:692c3000 (2fff)
  get Phys(data[n=3+3000]=f7462000)
AtapiVirtToPhysAddr_: f7462000 -> 00000000:692c6000
  ph data[2]=0:692c3000 (3fff)
  get Phys(data[n=3+4000]=f7463000)
AtapiVirtToPhysAddr_: f7463000 -> 00000000:692c7000
  ph data[2]=0:692c3000 (4fff)
  get Phys(data[n=3+5000]=f7464000)
AtapiVirtToPhysAddr_: f7464000 -> 00000000:692c8000
  ph data[2]=0:692c3000 (5fff)
  get Phys(data[n=3+6000]=f7465000)
AtapiVirtToPhysAddr_: f7465000 -> 00000000:692c9000
  ph data[2]=0:692c3000 (6fff)
  get Phys(data[n=3+7000]=f7466000)
AtapiVirtToPhysAddr_: f7466000 -> 00000000:692c2000
  set TERM
  ph data[3]=0:692c2000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b3c
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002790, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002790, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7467000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7467000)
AtapiVirtToPhysAddr_: f7467000 -> 00000000:692cb000
  ph data[0]=0:692cb000 (fff)
  get Phys(data[n=1+1000]=f7468000)
AtapiVirtToPhysAddr_: f7468000 -> 00000000:692cc000
  ph data[0]=0:692cb000 (1fff)
  get Phys(data[n=1+2000]=f7469000)
AtapiVirtToPhysAddr_: f7469000 -> 00000000:692cd000
  ph data[0]=0:692cb000 (2fff)
  get Phys(data[n=1+3000]=f746a000)
AtapiVirtToPhysAddr_: f746a000 -> 00000000:692ce000
  ph data[0]=0:692cb000 (3fff)
  get Phys(data[n=1+4000]=f746b000)
AtapiVirtToPhysAddr_: f746b000 -> 00000000:692cf000
  ph data[0]=0:692cb000 (4fff)
  get Phys(data[n=1+5000]=f746c000)
AtapiVirtToPhysAddr_: f746c000 -> 00000000:692d0000
  ph data[0]=0:692cb000 (5fff)
  get Phys(data[n=1+6000]=f746d000)
AtapiVirtToPhysAddr_: f746d000 -> 00000000:692d1000
  ph data[0]=0:692cb000 (6fff)
  get Phys(data[n=1+7000]=f746e000)
AtapiVirtToPhysAddr_: f746e000 -> 00000000:692ca000
  ph data[1]=0:692ca000 (fff)
  get Phys(data[n=2+1000]=f746f000)
AtapiVirtToPhysAddr_: f746f000 -> 00000000:692d3000
  ph data[2]=0:692d3000 (fff)
  get Phys(data[n=3+1000]=f7470000)
AtapiVirtToPhysAddr_: f7470000 -> 00000000:692d4000
  ph data[2]=0:692d3000 (1fff)
  get Phys(data[n=3+2000]=f7471000)
AtapiVirtToPhysAddr_: f7471000 -> 00000000:692d5000
  ph data[2]=0:692d3000 (2fff)
  get Phys(data[n=3+3000]=f7472000)
AtapiVirtToPhysAddr_: f7472000 -> 00000000:692d6000
  ph data[2]=0:692d3000 (3fff)
  get Phys(data[n=3+4000]=f7473000)
AtapiVirtToPhysAddr_: f7473000 -> 00000000:692d7000
  ph data[2]=0:692d3000 (4fff)
  get Phys(data[n=3+5000]=f7474000)
AtapiVirtToPhysAddr_: f7474000 -> 00000000:692d8000
  ph data[2]=0:692d3000 (5fff)
  get Phys(data[n=3+6000]=f7475000)
AtapiVirtToPhysAddr_: f7475000 -> 00000000:692d9000
  ph data[2]=0:692d3000 (6fff)
  get Phys(data[n=3+7000]=f7476000)
AtapiVirtToPhysAddr_: f7476000 -> 00000000:692d2000
  set TERM
  ph data[3]=0:692d2000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b3c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002810, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002810, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7477000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7477000)
AtapiVirtToPhysAddr_: f7477000 -> 00000000:692db000
  ph data[0]=0:692db000 (fff)
  get Phys(data[n=1+1000]=f7478000)
AtapiVirtToPhysAddr_: f7478000 -> 00000000:692dc000
  ph data[0]=0:692db000 (1fff)
  get Phys(data[n=1+2000]=f7479000)
AtapiVirtToPhysAddr_: f7479000 -> 00000000:692dd000
  ph data[0]=0:692db000 (2fff)
  get Phys(data[n=1+3000]=f747a000)
AtapiVirtToPhysAddr_: f747a000 -> 00000000:692de000
  ph data[0]=0:692db000 (3fff)
  get Phys(data[n=1+4000]=f747b000)
AtapiVirtToPhysAddr_: f747b000 -> 00000000:692df000
  ph data[0]=0:692db000 (4fff)
  get Phys(data[n=1+5000]=f747c000)
AtapiVirtToPhysAddr_: f747c000 -> 00000000:692e0000
  ph data[0]=0:692db000 (5fff)
  get Phys(data[n=1+6000]=f747d000)
AtapiVirtToPhysAddr_: f747d000 -> 00000000:692e1000
  ph data[0]=0:692db000 (6fff)
  get Phys(data[n=1+7000]=f747e000)
AtapiVirtToPhysAddr_: f747e000 -> 00000000:692da000
  ph data[1]=0:692da000 (fff)
  get Phys(data[n=2+1000]=f747f000)
AtapiVirtToPhysAddr_: f747f000 -> 00000000:692e3000
  ph data[2]=0:692e3000 (fff)
  get Phys(data[n=3+1000]=f7480000)
AtapiVirtToPhysAddr_: f7480000 -> 00000000:692e4000
  ph data[2]=0:692e3000 (1fff)
  get Phys(data[n=3+2000]=f7481000)
AtapiVirtToPhysAddr_: f7481000 -> 00000000:692e5000
  ph data[2]=0:692e3000 (2fff)
  get Phys(data[n=3+3000]=f7482000)
AtapiVirtToPhysAddr_: f7482000 -> 00000000:692e6000
  ph data[2]=0:692e3000 (3fff)
  get Phys(data[n=3+4000]=f7483000)
AtapiVirtToPhysAddr_: f7483000 -> 00000000:692e7000
  ph data[2]=0:692e3000 (4fff)
  get Phys(data[n=3+5000]=f7484000)
AtapiVirtToPhysAddr_: f7484000 -> 00000000:692e8000
  ph data[2]=0:692e3000 (5fff)
  get Phys(data[n=3+6000]=f7485000)
AtapiVirtToPhysAddr_: f7485000 -> 00000000:692e9000
  ph data[2]=0:692e3000 (6fff)
  get Phys(data[n=3+7000]=f7486000)
AtapiVirtToPhysAddr_: f7486000 -> 00000000:692e2000
  set TERM
  ph data[3]=0:692e2000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002710, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb67194b8
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002790, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb67194b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb67194b8
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002810, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b3c
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002890, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002890, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7447000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7447000)
AtapiVirtToPhysAddr_: f7447000 -> 00000000:68e1b000
  ph data[0]=0:68e1b000 (fff)
  get Phys(data[n=1+1000]=f7448000)
AtapiVirtToPhysAddr_: f7448000 -> 00000000:68e14000
  ph data[1]=0:68e14000 (fff)
  get Phys(data[n=2+1000]=f7449000)
AtapiVirtToPhysAddr_: f7449000 -> 00000000:68e15000
  ph data[1]=0:68e14000 (1fff)
  get Phys(data[n=2+2000]=f744a000)
AtapiVirtToPhysAddr_: f744a000 -> 00000000:68e16000
  ph data[1]=0:68e14000 (2fff)
  get Phys(data[n=2+3000]=f744b000)
AtapiVirtToPhysAddr_: f744b000 -> 00000000:68e17000
  ph data[1]=0:68e14000 (3fff)
  get Phys(data[n=2+4000]=f744c000)
AtapiVirtToPhysAddr_: f744c000 -> 00000000:68e18000
  ph data[1]=0:68e14000 (4fff)
  get Phys(data[n=2+5000]=f744d000)
AtapiVirtToPhysAddr_: f744d000 -> 00000000:68e19000
  ph data[1]=0:68e14000 (5fff)
  get Phys(data[n=2+6000]=f744e000)
AtapiVirtToPhysAddr_: f744e000 -> 00000000:68e1a000
  ph data[1]=0:68e14000 (6fff)
  get Phys(data[n=2+7000]=f744f000)
AtapiVirtToPhysAddr_: f744f000 -> 00000000:68e23000
  ph data[2]=0:68e23000 (fff)
  get Phys(data[n=3+1000]=f7450000)
AtapiVirtToPhysAddr_: f7450000 -> 00000000:68e1c000
  ph data[3]=0:68e1c000 (fff)
  get Phys(data[n=4+1000]=f7451000)
AtapiVirtToPhysAddr_: f7451000 -> 00000000:68e1d000
  ph data[3]=0:68e1c000 (1fff)
  get Phys(data[n=4+2000]=f7452000)
AtapiVirtToPhysAddr_: f7452000 -> 00000000:68e1e000
  ph data[3]=0:68e1c000 (2fff)
  get Phys(data[n=4+3000]=f7453000)
AtapiVirtToPhysAddr_: f7453000 -> 00000000:68e1f000
  ph data[3]=0:68e1c000 (3fff)
  get Phys(data[n=4+4000]=f7454000)
AtapiVirtToPhysAddr_: f7454000 -> 00000000:68e20000
  ph data[3]=0:68e1c000 (4fff)
  get Phys(data[n=4+5000]=f7455000)
AtapiVirtToPhysAddr_: f7455000 -> 00000000:68e21000
  ph data[3]=0:68e1c000 (5fff)
  get Phys(data[n=4+6000]=f7456000)
AtapiVirtToPhysAddr_: f7456000 -> 00000000:68e22000
  set TERM
  ph data[3]=0:68e1c000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002890, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b3c
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002910, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002910, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7457000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7457000)
AtapiVirtToPhysAddr_: f7457000 -> 00000000:68e2b000
  ph data[0]=0:68e2b000 (fff)
  get Phys(data[n=1+1000]=f7458000)
AtapiVirtToPhysAddr_: f7458000 -> 00000000:68e24000
  ph data[1]=0:68e24000 (fff)
  get Phys(data[n=2+1000]=f7459000)
AtapiVirtToPhysAddr_: f7459000 -> 00000000:68e25000
  ph data[1]=0:68e24000 (1fff)
  get Phys(data[n=2+2000]=f745a000)
AtapiVirtToPhysAddr_: f745a000 -> 00000000:68e26000
  ph data[1]=0:68e24000 (2fff)
  get Phys(data[n=2+3000]=f745b000)
AtapiVirtToPhysAddr_: f745b000 -> 00000000:68e27000
  ph data[1]=0:68e24000 (3fff)
  get Phys(data[n=2+4000]=f745c000)
AtapiVirtToPhysAddr_: f745c000 -> 00000000:68e28000
  ph data[1]=0:68e24000 (4fff)
  get Phys(data[n=2+5000]=f745d000)
AtapiVirtToPhysAddr_: f745d000 -> 00000000:68e29000
  ph data[1]=0:68e24000 (5fff)
  get Phys(data[n=2+6000]=f745e000)
AtapiVirtToPhysAddr_: f745e000 -> 00000000:68e2a000
  ph data[1]=0:68e24000 (6fff)
  get Phys(data[n=2+7000]=f745f000)
AtapiVirtToPhysAddr_: f745f000 -> 00000000:68e33000
  ph data[2]=0:68e33000 (fff)
  get Phys(data[n=3+1000]=f7460000)
AtapiVirtToPhysAddr_: f7460000 -> 00000000:68e2c000
  ph data[3]=0:68e2c000 (fff)
  get Phys(data[n=4+1000]=f7461000)
AtapiVirtToPhysAddr_: f7461000 -> 00000000:68e2d000
  ph data[3]=0:68e2c000 (1fff)
  get Phys(data[n=4+2000]=f7462000)
AtapiVirtToPhysAddr_: f7462000 -> 00000000:68e2e000
  ph data[3]=0:68e2c000 (2fff)
  get Phys(data[n=4+3000]=f7463000)
AtapiVirtToPhysAddr_: f7463000 -> 00000000:68e2f000
  ph data[3]=0:68e2c000 (3fff)
  get Phys(data[n=4+4000]=f7464000)
AtapiVirtToPhysAddr_: f7464000 -> 00000000:68e30000
  ph data[3]=0:68e2c000 (4fff)
  get Phys(data[n=4+5000]=f7465000)
AtapiVirtToPhysAddr_: f7465000 -> 00000000:68e31000
  ph data[3]=0:68e2c000 (5fff)
  get Phys(data[n=4+6000]=f7466000)
AtapiVirtToPhysAddr_: f7466000 -> 00000000:68e32000
  set TERM
  ph data[3]=0:68e2c000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb67194b8
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002910, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b3c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002990, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002990, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7467000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7467000)
AtapiVirtToPhysAddr_: f7467000 -> 00000000:68e3b000
  ph data[0]=0:68e3b000 (fff)
  get Phys(data[n=1+1000]=f7468000)
AtapiVirtToPhysAddr_: f7468000 -> 00000000:68e34000
  ph data[1]=0:68e34000 (fff)
  get Phys(data[n=2+1000]=f7469000)
AtapiVirtToPhysAddr_: f7469000 -> 00000000:68e35000
  ph data[1]=0:68e34000 (1fff)
  get Phys(data[n=2+2000]=f746a000)
AtapiVirtToPhysAddr_: f746a000 -> 00000000:68e36000
  ph data[1]=0:68e34000 (2fff)
  get Phys(data[n=2+3000]=f746b000)
AtapiVirtToPhysAddr_: f746b000 -> 00000000:68e37000
  ph data[1]=0:68e34000 (3fff)
  get Phys(data[n=2+4000]=f746c000)
AtapiVirtToPhysAddr_: f746c000 -> 00000000:68e38000
  ph data[1]=0:68e34000 (4fff)
  get Phys(data[n=2+5000]=f746d000)
AtapiVirtToPhysAddr_: f746d000 -> 00000000:68e39000
  ph data[1]=0:68e34000 (5fff)
  get Phys(data[n=2+6000]=f746e000)
AtapiVirtToPhysAddr_: f746e000 -> 00000000:68e3a000
  ph data[1]=0:68e34000 (6fff)
  get Phys(data[n=2+7000]=f746f000)
AtapiVirtToPhysAddr_: f746f000 -> 00000000:68e43000
  ph data[2]=0:68e43000 (fff)
  get Phys(data[n=3+1000]=f7470000)
AtapiVirtToPhysAddr_: f7470000 -> 00000000:68e3c000
  ph data[3]=0:68e3c000 (fff)
  get Phys(data[n=4+1000]=f7471000)
AtapiVirtToPhysAddr_: f7471000 -> 00000000:68e3d000
  ph data[3]=0:68e3c000 (1fff)
  get Phys(data[n=4+2000]=f7472000)
AtapiVirtToPhysAddr_: f7472000 -> 00000000:68e3e000
  ph data[3]=0:68e3c000 (2fff)
  get Phys(data[n=4+3000]=f7473000)
AtapiVirtToPhysAddr_: f7473000 -> 00000000:68e3f000
  ph data[3]=0:68e3c000 (3fff)
  get Phys(data[n=4+4000]=f7474000)
AtapiVirtToPhysAddr_: f7474000 -> 00000000:68e40000
  ph data[3]=0:68e3c000 (4fff)
  get Phys(data[n=4+5000]=f7475000)
AtapiVirtToPhysAddr_: f7475000 -> 00000000:68e41000
  ph data[3]=0:68e3c000 (5fff)
  get Phys(data[n=4+6000]=f7476000)
AtapiVirtToPhysAddr_: f7476000 -> 00000000:68e42000
  set TERM
  ph data[3]=0:68e3c000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b3c
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002a10, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002a10, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7477000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7477000)
AtapiVirtToPhysAddr_: f7477000 -> 00000000:68e4b000
  ph data[0]=0:68e4b000 (fff)
  get Phys(data[n=1+1000]=f7478000)
AtapiVirtToPhysAddr_: f7478000 -> 00000000:68e44000
  ph data[1]=0:68e44000 (fff)
  get Phys(data[n=2+1000]=f7479000)
AtapiVirtToPhysAddr_: f7479000 -> 00000000:68e45000
  ph data[1]=0:68e44000 (1fff)
  get Phys(data[n=2+2000]=f747a000)
AtapiVirtToPhysAddr_: f747a000 -> 00000000:68e46000
  ph data[1]=0:68e44000 (2fff)
  get Phys(data[n=2+3000]=f747b000)
AtapiVirtToPhysAddr_: f747b000 -> 00000000:68e47000
  ph data[1]=0:68e44000 (3fff)
  get Phys(data[n=2+4000]=f747c000)
AtapiVirtToPhysAddr_: f747c000 -> 00000000:68e48000
  ph data[1]=0:68e44000 (4fff)
  get Phys(data[n=2+5000]=f747d000)
AtapiVirtToPhysAddr_: f747d000 -> 00000000:68e49000
  ph data[1]=0:68e44000 (5fff)
  get Phys(data[n=2+6000]=f747e000)
AtapiVirtToPhysAddr_: f747e000 -> 00000000:68e4a000
  ph data[1]=0:68e44000 (6fff)
  get Phys(data[n=2+7000]=f747f000)
AtapiVirtToPhysAddr_: f747f000 -> 00000000:68e53000
  ph data[2]=0:68e53000 (fff)
  get Phys(data[n=3+1000]=f7480000)
AtapiVirtToPhysAddr_: f7480000 -> 00000000:68e4c000
  ph data[3]=0:68e4c000 (fff)
  get Phys(data[n=4+1000]=f7481000)
AtapiVirtToPhysAddr_: f7481000 -> 00000000:68e4d000
  ph data[3]=0:68e4c000 (1fff)
  get Phys(data[n=4+2000]=f7482000)
AtapiVirtToPhysAddr_: f7482000 -> 00000000:68e4e000
  ph data[3]=0:68e4c000 (2fff)
  get Phys(data[n=4+3000]=f7483000)
AtapiVirtToPhysAddr_: f7483000 -> 00000000:68e4f000
  ph data[3]=0:68e4c000 (3fff)
  get Phys(data[n=4+4000]=f7484000)
AtapiVirtToPhysAddr_: f7484000 -> 00000000:68e50000
  ph data[3]=0:68e4c000 (4fff)
  get Phys(data[n=4+5000]=f7485000)
AtapiVirtToPhysAddr_: f7485000 -> 00000000:68e51000
  ph data[3]=0:68e4c000 (5fff)
  get Phys(data[n=4+6000]=f7486000)
AtapiVirtToPhysAddr_: f7486000 -> 00000000:68e52000
  set TERM
  ph data[3]=0:68e4c000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb67194b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb67194b8
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002990, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002a10, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b3c
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002a90, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002a90, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7447000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7447000)
AtapiVirtToPhysAddr_: f7447000 -> 00000000:68b4b000
  ph data[0]=0:68b4b000 (fff)
  get Phys(data[n=1+1000]=f7448000)
AtapiVirtToPhysAddr_: f7448000 -> 00000000:68b4c000
  ph data[0]=0:68b4b000 (1fff)
  get Phys(data[n=1+2000]=f7449000)
AtapiVirtToPhysAddr_: f7449000 -> 00000000:68b4d000
  ph data[0]=0:68b4b000 (2fff)
  get Phys(data[n=1+3000]=f744a000)
AtapiVirtToPhysAddr_: f744a000 -> 00000000:68b46000
  ph data[1]=0:68b46000 (fff)
  get Phys(data[n=2+1000]=f744b000)
AtapiVirtToPhysAddr_: f744b000 -> 00000000:68b47000
  ph data[1]=0:68b46000 (1fff)
  get Phys(data[n=2+2000]=f744c000)
AtapiVirtToPhysAddr_: f744c000 -> 00000000:68b48000
  ph data[1]=0:68b46000 (2fff)
  get Phys(data[n=2+3000]=f744d000)
AtapiVirtToPhysAddr_: f744d000 -> 00000000:68b49000
  ph data[1]=0:68b46000 (3fff)
  get Phys(data[n=2+4000]=f744e000)
AtapiVirtToPhysAddr_: f744e000 -> 00000000:68b4a000
  ph data[1]=0:68b46000 (4fff)
  get Phys(data[n=2+5000]=f744f000)
AtapiVirtToPhysAddr_: f744f000 -> 00000000:68b53000
  ph data[2]=0:68b53000 (fff)
  get Phys(data[n=3+1000]=f7450000)
AtapiVirtToPhysAddr_: f7450000 -> 00000000:68b54000
  ph data[2]=0:68b53000 (1fff)
  get Phys(data[n=3+2000]=f7451000)
AtapiVirtToPhysAddr_: f7451000 -> 00000000:68b55000
  ph data[2]=0:68b53000 (2fff)
  get Phys(data[n=3+3000]=f7452000)
AtapiVirtToPhysAddr_: f7452000 -> 00000000:68b4e000
  ph data[3]=0:68b4e000 (fff)
  get Phys(data[n=4+1000]=f7453000)
AtapiVirtToPhysAddr_: f7453000 -> 00000000:68b4f000
  ph data[3]=0:68b4e000 (1fff)
  get Phys(data[n=4+2000]=f7454000)
AtapiVirtToPhysAddr_: f7454000 -> 00000000:68b50000
  ph data[3]=0:68b4e000 (2fff)
  get Phys(data[n=4+3000]=f7455000)
AtapiVirtToPhysAddr_: f7455000 -> 00000000:68b51000
  ph data[3]=0:68b4e000 (3fff)
  get Phys(data[n=4+4000]=f7456000)
AtapiVirtToPhysAddr_: f7456000 -> 00000000:68b52000
  set TERM
  ph data[3]=0:68b4e000 (4fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002a90, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b3c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002b10, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002b10, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7457000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7457000)
AtapiVirtToPhysAddr_: f7457000 -> 00000000:68b5b000
  ph data[0]=0:68b5b000 (fff)
  get Phys(data[n=1+1000]=f7458000)
AtapiVirtToPhysAddr_: f7458000 -> 00000000:68b5c000
  ph data[0]=0:68b5b000 (1fff)
  get Phys(data[n=1+2000]=f7459000)
AtapiVirtToPhysAddr_: f7459000 -> 00000000:68b5d000
  ph data[0]=0:68b5b000 (2fff)
  get Phys(data[n=1+3000]=f745a000)
AtapiVirtToPhysAddr_: f745a000 -> 00000000:68b56000
  ph data[1]=0:68b56000 (fff)
  get Phys(data[n=2+1000]=f745b000)
AtapiVirtToPhysAddr_: f745b000 -> 00000000:68b57000
  ph data[1]=0:68b56000 (1fff)
  get Phys(data[n=2+2000]=f745c000)
AtapiVirtToPhysAddr_: f745c000 -> 00000000:68b58000
  ph data[1]=0:68b56000 (2fff)
  get Phys(data[n=2+3000]=f745d000)
AtapiVirtToPhysAddr_: f745d000 -> 00000000:68b59000
  ph data[1]=0:68b56000 (3fff)
  get Phys(data[n=2+4000]=f745e000)
AtapiVirtToPhysAddr_: f745e000 -> 00000000:68b5a000
  ph data[1]=0:68b56000 (4fff)
  get Phys(data[n=2+5000]=f745f000)
AtapiVirtToPhysAddr_: f745f000 -> 00000000:68b63000
  ph data[2]=0:68b63000 (fff)
  get Phys(data[n=3+1000]=f7460000)
AtapiVirtToPhysAddr_: f7460000 -> 00000000:68b64000
  ph data[2]=0:68b63000 (1fff)
  get Phys(data[n=3+2000]=f7461000)
AtapiVirtToPhysAddr_: f7461000 -> 00000000:68b65000
  ph data[2]=0:68b63000 (2fff)
  get Phys(data[n=3+3000]=f7462000)
AtapiVirtToPhysAddr_: f7462000 -> 00000000:68b5e000
  ph data[3]=0:68b5e000 (fff)
  get Phys(data[n=4+1000]=f7463000)
AtapiVirtToPhysAddr_: f7463000 -> 00000000:68b5f000
  ph data[3]=0:68b5e000 (1fff)
  get Phys(data[n=4+2000]=f7464000)
AtapiVirtToPhysAddr_: f7464000 -> 00000000:68b60000
  ph data[3]=0:68b5e000 (2fff)
  get Phys(data[n=4+3000]=f7465000)
AtapiVirtToPhysAddr_: f7465000 -> 00000000:68b61000
  ph data[3]=0:68b5e000 (3fff)
  get Phys(data[n=4+4000]=f7466000)
AtapiVirtToPhysAddr_: f7466000 -> 00000000:68b62000
  set TERM
  ph data[3]=0:68b5e000 (4fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b3c
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002b90, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002b90, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7467000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7467000)
AtapiVirtToPhysAddr_: f7467000 -> 00000000:68b6b000
  ph data[0]=0:68b6b000 (fff)
  get Phys(data[n=1+1000]=f7468000)
AtapiVirtToPhysAddr_: f7468000 -> 00000000:68b6c000
  ph data[0]=0:68b6b000 (1fff)
  get Phys(data[n=1+2000]=f7469000)
AtapiVirtToPhysAddr_: f7469000 -> 00000000:68b6d000
  ph data[0]=0:68b6b000 (2fff)
  get Phys(data[n=1+3000]=f746a000)
AtapiVirtToPhysAddr_: f746a000 -> 00000000:68b66000
  ph data[1]=0:68b66000 (fff)
  get Phys(data[n=2+1000]=f746b000)
AtapiVirtToPhysAddr_: f746b000 -> 00000000:68b67000
  ph data[1]=0:68b66000 (1fff)
  get Phys(data[n=2+2000]=f746c000)
AtapiVirtToPhysAddr_: f746c000 -> 00000000:68b68000
  ph data[1]=0:68b66000 (2fff)
  get Phys(data[n=2+3000]=f746d000)
AtapiVirtToPhysAddr_: f746d000 -> 00000000:68b69000
  ph data[1]=0:68b66000 (3fff)
  get Phys(data[n=2+4000]=f746e000)
AtapiVirtToPhysAddr_: f746e000 -> 00000000:68b6a000
  ph data[1]=0:68b66000 (4fff)
  get Phys(data[n=2+5000]=f746f000)
AtapiVirtToPhysAddr_: f746f000 -> 00000000:68b73000
  ph data[2]=0:68b73000 (fff)
  get Phys(data[n=3+1000]=f7470000)
AtapiVirtToPhysAddr_: f7470000 -> 00000000:68b74000
  ph data[2]=0:68b73000 (1fff)
  get Phys(data[n=3+2000]=f7471000)
AtapiVirtToPhysAddr_: f7471000 -> 00000000:68b75000
  ph data[2]=0:68b73000 (2fff)
  get Phys(data[n=3+3000]=f7472000)
AtapiVirtToPhysAddr_: f7472000 -> 00000000:68b6e000
  ph data[3]=0:68b6e000 (fff)
  get Phys(data[n=4+1000]=f7473000)
AtapiVirtToPhysAddr_: f7473000 -> 00000000:68b6f000
  ph data[3]=0:68b6e000 (1fff)
  get Phys(data[n=4+2000]=f7474000)
AtapiVirtToPhysAddr_: f7474000 -> 00000000:68b70000
  ph data[3]=0:68b6e000 (2fff)
  get Phys(data[n=4+3000]=f7475000)
AtapiVirtToPhysAddr_: f7475000 -> 00000000:68b71000
  ph data[3]=0:68b6e000 (3fff)
  get Phys(data[n=4+4000]=f7476000)
AtapiVirtToPhysAddr_: f7476000 -> 00000000:68b72000
  set TERM
  ph data[3]=0:68b6e000 (4fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b3c
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002c10, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002c10, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7477000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7477000)
AtapiVirtToPhysAddr_: f7477000 -> 00000000:68b7b000
  ph data[0]=0:68b7b000 (fff)
  get Phys(data[n=1+1000]=f7478000)
AtapiVirtToPhysAddr_: f7478000 -> 00000000:68b7c000
  ph data[0]=0:68b7b000 (1fff)
  get Phys(data[n=1+2000]=f7479000)
AtapiVirtToPhysAddr_: f7479000 -> 00000000:68b7d000
  ph data[0]=0:68b7b000 (2fff)
  get Phys(data[n=1+3000]=f747a000)
AtapiVirtToPhysAddr_: f747a000 -> 00000000:68b76000
  ph data[1]=0:68b76000 (fff)
  get Phys(data[n=2+1000]=f747b000)
AtapiVirtToPhysAddr_: f747b000 -> 00000000:68b77000
  ph data[1]=0:68b76000 (1fff)
  get Phys(data[n=2+2000]=f747c000)
AtapiVirtToPhysAddr_: f747c000 -> 00000000:68b78000
  ph data[1]=0:68b76000 (2fff)
  get Phys(data[n=2+3000]=f747d000)
AtapiVirtToPhysAddr_: f747d000 -> 00000000:68b79000
  ph data[1]=0:68b76000 (3fff)
  get Phys(data[n=2+4000]=f747e000)
AtapiVirtToPhysAddr_: f747e000 -> 00000000:68b7a000
  ph data[1]=0:68b76000 (4fff)
  get Phys(data[n=2+5000]=f747f000)
AtapiVirtToPhysAddr_: f747f000 -> 00000000:68b83000
  ph data[2]=0:68b83000 (fff)
  get Phys(data[n=3+1000]=f7480000)
AtapiVirtToPhysAddr_: f7480000 -> 00000000:68b84000
  ph data[2]=0:68b83000 (1fff)
  get Phys(data[n=3+2000]=f7481000)
AtapiVirtToPhysAddr_: f7481000 -> 00000000:68b85000
  ph data[2]=0:68b83000 (2fff)
  get Phys(data[n=3+3000]=f7482000)
AtapiVirtToPhysAddr_: f7482000 -> 00000000:68b7e000
  ph data[3]=0:68b7e000 (fff)
  get Phys(data[n=4+1000]=f7483000)
AtapiVirtToPhysAddr_: f7483000 -> 00000000:68b7f000
  ph data[3]=0:68b7e000 (1fff)
  get Phys(data[n=4+2000]=f7484000)
AtapiVirtToPhysAddr_: f7484000 -> 00000000:68b80000
  ph data[3]=0:68b7e000 (2fff)
  get Phys(data[n=4+3000]=f7485000)
AtapiVirtToPhysAddr_: f7485000 -> 00000000:68b81000
  ph data[3]=0:68b7e000 (3fff)
  get Phys(data[n=4+4000]=f7486000)
AtapiVirtToPhysAddr_: f7486000 -> 00000000:68b82000
  set TERM
  ph data[3]=0:68b7e000 (4fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002b10, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb67194b8
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002b90, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb67194b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb67194b8
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf78019ec
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002c10, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b3c
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002c90, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002c90, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7447000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7447000)
AtapiVirtToPhysAddr_: f7447000 -> 00000000:686c3000
  ph data[0]=0:686c3000 (fff)
  get Phys(data[n=1+1000]=f7448000)
AtapiVirtToPhysAddr_: f7448000 -> 00000000:686c4000
  ph data[0]=0:686c3000 (1fff)
  get Phys(data[n=1+2000]=f7449000)
AtapiVirtToPhysAddr_: f7449000 -> 00000000:686c5000
  ph data[0]=0:686c3000 (2fff)
  get Phys(data[n=1+3000]=f744a000)
AtapiVirtToPhysAddr_: f744a000 -> 00000000:686c6000
  ph data[0]=0:686c3000 (3fff)
  get Phys(data[n=1+4000]=f744b000)
AtapiVirtToPhysAddr_: f744b000 -> 00000000:686c7000
  ph data[0]=0:686c3000 (4fff)
  get Phys(data[n=1+5000]=f744c000)
AtapiVirtToPhysAddr_: f744c000 -> 00000000:686c0000
  ph data[1]=0:686c0000 (fff)
  get Phys(data[n=2+1000]=f744d000)
AtapiVirtToPhysAddr_: f744d000 -> 00000000:686c1000
  ph data[1]=0:686c0000 (1fff)
  get Phys(data[n=2+2000]=f744e000)
AtapiVirtToPhysAddr_: f744e000 -> 00000000:686c2000
  ph data[1]=0:686c0000 (2fff)
  get Phys(data[n=2+3000]=f744f000)
AtapiVirtToPhysAddr_: f744f000 -> 00000000:686cb000
  ph data[2]=0:686cb000 (fff)
  get Phys(data[n=3+1000]=f7450000)
AtapiVirtToPhysAddr_: f7450000 -> 00000000:686cc000
  ph data[2]=0:686cb000 (1fff)
  get Phys(data[n=3+2000]=f7451000)
AtapiVirtToPhysAddr_: f7451000 -> 00000000:686cd000
  ph data[2]=0:686cb000 (2fff)
  get Phys(data[n=3+3000]=f7452000)
AtapiVirtToPhysAddr_: f7452000 -> 00000000:686ce000
  ph data[2]=0:686cb000 (3fff)
  get Phys(data[n=3+4000]=f7453000)
AtapiVirtToPhysAddr_: f7453000 -> 00000000:686cf000
  ph data[2]=0:686cb000 (4fff)
  get Phys(data[n=3+5000]=f7454000)
AtapiVirtToPhysAddr_: f7454000 -> 00000000:686c8000
  ph data[3]=0:686c8000 (fff)
  get Phys(data[n=4+1000]=f7455000)
AtapiVirtToPhysAddr_: f7455000 -> 00000000:686c9000
  ph data[3]=0:686c8000 (1fff)
  get Phys(data[n=4+2000]=f7456000)
AtapiVirtToPhysAddr_: f7456000 -> 00000000:686ca000
  set TERM
  ph data[3]=0:686c8000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002c90, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b3c
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002d10, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002d10, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7457000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7457000)
AtapiVirtToPhysAddr_: f7457000 -> 00000000:686d3000
  ph data[0]=0:686d3000 (fff)
  get Phys(data[n=1+1000]=f7458000)
AtapiVirtToPhysAddr_: f7458000 -> 00000000:686d4000
  ph data[0]=0:686d3000 (1fff)
  get Phys(data[n=1+2000]=f7459000)
AtapiVirtToPhysAddr_: f7459000 -> 00000000:686d5000
  ph data[0]=0:686d3000 (2fff)
  get Phys(data[n=1+3000]=f745a000)
AtapiVirtToPhysAddr_: f745a000 -> 00000000:686d6000
  ph data[0]=0:686d3000 (3fff)
  get Phys(data[n=1+4000]=f745b000)
AtapiVirtToPhysAddr_: f745b000 -> 00000000:686d7000
  ph data[0]=0:686d3000 (4fff)
  get Phys(data[n=1+5000]=f745c000)
AtapiVirtToPhysAddr_: f745c000 -> 00000000:686d0000
  ph data[1]=0:686d0000 (fff)
  get Phys(data[n=2+1000]=f745d000)
AtapiVirtToPhysAddr_: f745d000 -> 00000000:686d1000
  ph data[1]=0:686d0000 (1fff)
  get Phys(data[n=2+2000]=f745e000)
AtapiVirtToPhysAddr_: f745e000 -> 00000000:686d2000
  ph data[1]=0:686d0000 (2fff)
  get Phys(data[n=2+3000]=f745f000)
AtapiVirtToPhysAddr_: f745f000 -> 00000000:686db000
  ph data[2]=0:686db000 (fff)
  get Phys(data[n=3+1000]=f7460000)
AtapiVirtToPhysAddr_: f7460000 -> 00000000:686dc000
  ph data[2]=0:686db000 (1fff)
  get Phys(data[n=3+2000]=f7461000)
AtapiVirtToPhysAddr_: f7461000 -> 00000000:686dd000
  ph data[2]=0:686db000 (2fff)
  get Phys(data[n=3+3000]=f7462000)
AtapiVirtToPhysAddr_: f7462000 -> 00000000:686de000
  ph data[2]=0:686db000 (3fff)
  get Phys(data[n=3+4000]=f7463000)
AtapiVirtToPhysAddr_: f7463000 -> 00000000:686df000
  ph data[2]=0:686db000 (4fff)
  get Phys(data[n=3+5000]=f7464000)
AtapiVirtToPhysAddr_: f7464000 -> 00000000:686d8000
  ph data[3]=0:686d8000 (fff)
  get Phys(data[n=4+1000]=f7465000)
AtapiVirtToPhysAddr_: f7465000 -> 00000000:686d9000
  ph data[3]=0:686d8000 (1fff)
  get Phys(data[n=4+2000]=f7466000)
AtapiVirtToPhysAddr_: f7466000 -> 00000000:686da000
  set TERM
  ph data[3]=0:686d8000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b3c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002d90, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002d90, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7467000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7467000)
AtapiVirtToPhysAddr_: f7467000 -> 00000000:686e3000
  ph data[0]=0:686e3000 (fff)
  get Phys(data[n=1+1000]=f7468000)
AtapiVirtToPhysAddr_: f7468000 -> 00000000:686e4000
  ph data[0]=0:686e3000 (1fff)
  get Phys(data[n=1+2000]=f7469000)
AtapiVirtToPhysAddr_: f7469000 -> 00000000:686e5000
  ph data[0]=0:686e3000 (2fff)
  get Phys(data[n=1+3000]=f746a000)
AtapiVirtToPhysAddr_: f746a000 -> 00000000:686e6000
  ph data[0]=0:686e3000 (3fff)
  get Phys(data[n=1+4000]=f746b000)
AtapiVirtToPhysAddr_: f746b000 -> 00000000:686e7000
  ph data[0]=0:686e3000 (4fff)
  get Phys(data[n=1+5000]=f746c000)
AtapiVirtToPhysAddr_: f746c000 -> 00000000:686e0000
  ph data[1]=0:686e0000 (fff)
  get Phys(data[n=2+1000]=f746d000)
AtapiVirtToPhysAddr_: f746d000 -> 00000000:686e1000
  ph data[1]=0:686e0000 (1fff)
  get Phys(data[n=2+2000]=f746e000)
AtapiVirtToPhysAddr_: f746e000 -> 00000000:686e2000
  ph data[1]=0:686e0000 (2fff)
  get Phys(data[n=2+3000]=f746f000)
AtapiVirtToPhysAddr_: f746f000 -> 00000000:686eb000
  ph data[2]=0:686eb000 (fff)
  get Phys(data[n=3+1000]=f7470000)
AtapiVirtToPhysAddr_: f7470000 -> 00000000:686ec000
  ph data[2]=0:686eb000 (1fff)
  get Phys(data[n=3+2000]=f7471000)
AtapiVirtToPhysAddr_: f7471000 -> 00000000:686ed000
  ph data[2]=0:686eb000 (2fff)
  get Phys(data[n=3+3000]=f7472000)
AtapiVirtToPhysAddr_: f7472000 -> 00000000:686ee000
  ph data[2]=0:686eb000 (3fff)
  get Phys(data[n=3+4000]=f7473000)
AtapiVirtToPhysAddr_: f7473000 -> 00000000:686ef000
  ph data[2]=0:686eb000 (4fff)
  get Phys(data[n=3+5000]=f7474000)
AtapiVirtToPhysAddr_: f7474000 -> 00000000:686e8000
  ph data[3]=0:686e8000 (fff)
  get Phys(data[n=4+1000]=f7475000)
AtapiVirtToPhysAddr_: f7475000 -> 00000000:686e9000
  ph data[3]=0:686e8000 (1fff)
  get Phys(data[n=4+2000]=f7476000)
AtapiVirtToPhysAddr_: f7476000 -> 00000000:686ea000
  set TERM
  ph data[3]=0:686e8000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb67194b8
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510a10
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002d10, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b3c
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002e10, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002e10, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7477000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7477000)
AtapiVirtToPhysAddr_: f7477000 -> 00000000:686f3000
  ph data[0]=0:686f3000 (fff)
  get Phys(data[n=1+1000]=f7478000)
AtapiVirtToPhysAddr_: f7478000 -> 00000000:686f4000
  ph data[0]=0:686f3000 (1fff)
  get Phys(data[n=1+2000]=f7479000)
AtapiVirtToPhysAddr_: f7479000 -> 00000000:686f5000
  ph data[0]=0:686f3000 (2fff)
  get Phys(data[n=1+3000]=f747a000)
AtapiVirtToPhysAddr_: f747a000 -> 00000000:686f6000
  ph data[0]=0:686f3000 (3fff)
  get Phys(data[n=1+4000]=f747b000)
AtapiVirtToPhysAddr_: f747b000 -> 00000000:686f7000
  ph data[0]=0:686f3000 (4fff)
  get Phys(data[n=1+5000]=f747c000)
AtapiVirtToPhysAddr_: f747c000 -> 00000000:686f0000
  ph data[1]=0:686f0000 (fff)
  get Phys(data[n=2+1000]=f747d000)
AtapiVirtToPhysAddr_: f747d000 -> 00000000:686f1000
  ph data[1]=0:686f0000 (1fff)
  get Phys(data[n=2+2000]=f747e000)
AtapiVirtToPhysAddr_: f747e000 -> 00000000:686f2000
  ph data[1]=0:686f0000 (2fff)
  get Phys(data[n=2+3000]=f747f000)
AtapiVirtToPhysAddr_: f747f000 -> 00000000:686fb000
  ph data[2]=0:686fb000 (fff)
  get Phys(data[n=3+1000]=f7480000)
AtapiVirtToPhysAddr_: f7480000 -> 00000000:686fc000
  ph data[2]=0:686fb000 (1fff)
  get Phys(data[n=3+2000]=f7481000)
AtapiVirtToPhysAddr_: f7481000 -> 00000000:686fd000
  ph data[2]=0:686fb000 (2fff)
  get Phys(data[n=3+3000]=f7482000)
AtapiVirtToPhysAddr_: f7482000 -> 00000000:686fe000
  ph data[2]=0:686fb000 (3fff)
  get Phys(data[n=3+4000]=f7483000)
AtapiVirtToPhysAddr_: f7483000 -> 00000000:686ff000
  ph data[2]=0:686fb000 (4fff)
  get Phys(data[n=3+5000]=f7484000)
AtapiVirtToPhysAddr_: f7484000 -> 00000000:686f8000
  ph data[3]=0:686f8000 (fff)
  get Phys(data[n=4+1000]=f7485000)
AtapiVirtToPhysAddr_: f7485000 -> 00000000:686f9000
  ph data[3]=0:686f8000 (1fff)
  get Phys(data[n=4+2000]=f7486000)
AtapiVirtToPhysAddr_: f7486000 -> 00000000:686fa000
  set TERM
  ph data[3]=0:686f8000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb67194b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb67194b8
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002d90, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002e10, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b3c
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002e90, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002e90, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f74d4000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f74d4000)
AtapiVirtToPhysAddr_: f74d4000 -> 00000000:683fb000
  ph data[0]=0:683fb000 (fff)
  get Phys(data[n=1+1000]=f74d5000)
AtapiVirtToPhysAddr_: f74d5000 -> 00000000:683fd000
  ph data[1]=0:683fd000 (fff)
  get Phys(data[n=2+1000]=f74d6000)
AtapiVirtToPhysAddr_: f74d6000 -> 00000000:683fe000
  ph data[1]=0:683fd000 (1fff)
  get Phys(data[n=2+2000]=f74d7000)
AtapiVirtToPhysAddr_: f74d7000 -> 00000000:683ff000
  ph data[1]=0:683fd000 (2fff)
  get Phys(data[n=2+3000]=f74d8000)
AtapiVirtToPhysAddr_: f74d8000 -> 00000000:68400000
  ph data[1]=0:683fd000 (3fff)
  get Phys(data[n=2+4000]=f74d9000)
AtapiVirtToPhysAddr_: f74d9000 -> 00000000:683f9000
  ph data[2]=0:683f9000 (fff)
  get Phys(data[n=3+1000]=f74da000)
AtapiVirtToPhysAddr_: f74da000 -> 00000000:683fa000
  ph data[2]=0:683f9000 (1fff)
  get Phys(data[n=3+2000]=f74db000)
AtapiVirtToPhysAddr_: f74db000 -> 00000000:68403000
  ph data[3]=0:68403000 (fff)
  get Phys(data[n=4+1000]=f74dc000)
AtapiVirtToPhysAddr_: f74dc000 -> 00000000:68404000
  ph data[3]=0:68403000 (1fff)
  get Phys(data[n=4+2000]=f74dd000)
AtapiVirtToPhysAddr_: f74dd000 -> 00000000:68405000
  ph data[3]=0:68403000 (2fff)
  get Phys(data[n=4+3000]=f74de000)
AtapiVirtToPhysAddr_: f74de000 -> 00000000:68406000
  ph data[3]=0:68403000 (3fff)
  get Phys(data[n=4+4000]=f74df000)
AtapiVirtToPhysAddr_: f74df000 -> 00000000:68407000
  ph data[3]=0:68403000 (4fff)
  get Phys(data[n=4+5000]=f74e0000)
AtapiVirtToPhysAddr_: f74e0000 -> 00000000:68408000
  ph data[3]=0:68403000 (5fff)
  get Phys(data[n=4+6000]=f74e1000)
AtapiVirtToPhysAddr_: f74e1000 -> 00000000:68401000
  ph data[4]=0:68401000 (fff)
  get Phys(data[n=5+1000]=f74e2000)
AtapiVirtToPhysAddr_: f74e2000 -> 00000000:68402000
  ph data[4]=0:68401000 (1fff)
  get Phys(data[n=5+2000]=f74e3000)
AtapiVirtToPhysAddr_: f74e3000 -> 00000000:6840b000
  set TERM
  ph data[5]=0:6840b000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002e90, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x6, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b3c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002f10, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002f10, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f74e4000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f74e4000)
AtapiVirtToPhysAddr_: f74e4000 -> 00000000:6840c000
  ph data[0]=0:6840c000 (fff)
  get Phys(data[n=1+1000]=f74e5000)
AtapiVirtToPhysAddr_: f74e5000 -> 00000000:6840d000
  ph data[0]=0:6840c000 (1fff)
  get Phys(data[n=1+2000]=f74e6000)
AtapiVirtToPhysAddr_: f74e6000 -> 00000000:6840e000
  ph data[0]=0:6840c000 (2fff)
  get Phys(data[n=1+3000]=f74e7000)
AtapiVirtToPhysAddr_: f74e7000 -> 00000000:6840f000
  ph data[0]=0:6840c000 (3fff)
  get Phys(data[n=1+4000]=f74e8000)
AtapiVirtToPhysAddr_: f74e8000 -> 00000000:68410000
  ph data[0]=0:6840c000 (4fff)
  get Phys(data[n=1+5000]=f74e9000)
AtapiVirtToPhysAddr_: f74e9000 -> 00000000:68409000
  ph data[1]=0:68409000 (fff)
  get Phys(data[n=2+1000]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:6840a000
  ph data[1]=0:68409000 (1fff)
  get Phys(data[n=2+2000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:68413000
  ph data[2]=0:68413000 (fff)
  get Phys(data[n=3+1000]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:68414000
  ph data[2]=0:68413000 (1fff)
  get Phys(data[n=3+2000]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:68415000
  ph data[2]=0:68413000 (2fff)
  get Phys(data[n=3+3000]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:68416000
  ph data[2]=0:68413000 (3fff)
  get Phys(data[n=3+4000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:68417000
  ph data[2]=0:68413000 (4fff)
  get Phys(data[n=3+5000]=f74f0000)
AtapiVirtToPhysAddr_: f74f0000 -> 00000000:68418000
  ph data[2]=0:68413000 (5fff)
  get Phys(data[n=3+6000]=f74f1000)
AtapiVirtToPhysAddr_: f74f1000 -> 00000000:68411000
  ph data[3]=0:68411000 (fff)
  get Phys(data[n=4+1000]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:68412000
  ph data[3]=0:68411000 (1fff)
  get Phys(data[n=4+2000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:6841b000
  set TERM
  ph data[4]=0:6841b000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b3c
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002f90, OrigWordsRequested 0x5000, DevSize 0x50
IdeReadWrite (REQ): Starting sector is 39002f90, Number of WORDS 0x5000, DevSize 0x50
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f74f4000, count a000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:6841c000
  ph data[0]=0:6841c000 (fff)
  get Phys(data[n=1+1000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:6841d000
  ph data[0]=0:6841c000 (1fff)
  get Phys(data[n=1+2000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:6841e000
  ph data[0]=0:6841c000 (2fff)
  get Phys(data[n=1+3000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:6841f000
  ph data[0]=0:6841c000 (3fff)
  get Phys(data[n=1+4000]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:68420000
  ph data[0]=0:6841c000 (4fff)
  get Phys(data[n=1+5000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:68419000
  ph data[1]=0:68419000 (fff)
  get Phys(data[n=2+1000]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:6841a000
  ph data[1]=0:68419000 (1fff)
  get Phys(data[n=2+2000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:68423000
  ph data[2]=0:68423000 (fff)
  get Phys(data[n=3+1000]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:68424000
  ph data[2]=0:68423000 (1fff)
  get Phys(data[n=3+2000]=f74fd000)
AtapiVirtToPhysAddr_: f74fd000 -> 00000000:68425000
  set TERM
  ph data[2]=0:68423000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7510b8c
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39719d60, OrigWordsRequested 0x2000, DevSize 0x20
IdeReadWrite (REQ): Starting sector is 39719d60, Number of WORDS 0x2000, DevSize 0x20
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f74fe000, count 4000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:68426000
  ph data[0]=0:68426000 (fff)
  get Phys(data[n=1+1000]=f74ff000)
AtapiVirtToPhysAddr_: f74ff000 -> 00000000:68427000
  ph data[0]=0:68426000 (1fff)
  get Phys(data[n=1+2000]=f7500000)
AtapiVirtToPhysAddr_: f7500000 -> 00000000:68428000
  ph data[0]=0:68426000 (2fff)
  get Phys(data[n=1+3000]=f7501000)
AtapiVirtToPhysAddr_: f7501000 -> 00000000:68421000
  set TERM
  ph data[1]=0:68421000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002f10, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x5, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb67194b8
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002f90, Count 0x50(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x3, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 5000, WordsLeft 5000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered a000, full size a000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb67194b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb67194b8
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39719d60, Count 0x20(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x2, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 2000, WordsLeft 2000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 4000, full size 4000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(ntoskrnl/config/cmcheck.c:25) CmCheckRegistry(0xB61B7008, 0) is UNIMPLEMENTED!
(ntoskrnl/mm/ARM3/session.c:790) Session 0 is ready to go: 0xBF7F0000 0xF7500000, 6774c 0xB64887F8
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520c18
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000680, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000680, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7447000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7447000)
AtapiVirtToPhysAddr_: f7447000 -> 00000000:67751000
  ph data[0]=0:67751000 (fff)
  get Phys(data[n=1+1000]=f7448000)
AtapiVirtToPhysAddr_: f7448000 -> 00000000:6775a000
  ph data[1]=0:6775a000 (fff)
  get Phys(data[n=2+1000]=f7449000)
AtapiVirtToPhysAddr_: f7449000 -> 00000000:6775b000
  ph data[1]=0:6775a000 (1fff)
  get Phys(data[n=2+2000]=f744a000)
AtapiVirtToPhysAddr_: f744a000 -> 00000000:67754000
  ph data[2]=0:67754000 (fff)
  get Phys(data[n=3+1000]=f744b000)
AtapiVirtToPhysAddr_: f744b000 -> 00000000:67755000
  ph data[2]=0:67754000 (1fff)
  get Phys(data[n=3+2000]=f744c000)
AtapiVirtToPhysAddr_: f744c000 -> 00000000:67756000
  ph data[2]=0:67754000 (2fff)
  get Phys(data[n=3+3000]=f744d000)
AtapiVirtToPhysAddr_: f744d000 -> 00000000:67757000
  ph data[2]=0:67754000 (3fff)
  get Phys(data[n=3+4000]=f744e000)
AtapiVirtToPhysAddr_: f744e000 -> 00000000:67758000
  ph data[2]=0:67754000 (4fff)
  get Phys(data[n=3+5000]=f744f000)
AtapiVirtToPhysAddr_: f744f000 -> 00000000:67759000
  ph data[2]=0:67754000 (5fff)
  get Phys(data[n=3+6000]=f7450000)
AtapiVirtToPhysAddr_: f7450000 -> 00000000:67762000
  ph data[3]=0:67762000 (fff)
  get Phys(data[n=4+1000]=f7451000)
AtapiVirtToPhysAddr_: f7451000 -> 00000000:67763000
  ph data[3]=0:67762000 (1fff)
  get Phys(data[n=4+2000]=f7452000)
AtapiVirtToPhysAddr_: f7452000 -> 00000000:6775c000
  ph data[4]=0:6775c000 (fff)
  get Phys(data[n=5+1000]=f7453000)
AtapiVirtToPhysAddr_: f7453000 -> 00000000:6775d000
  ph data[4]=0:6775c000 (1fff)
  get Phys(data[n=5+2000]=f7454000)
AtapiVirtToPhysAddr_: f7454000 -> 00000000:6775e000
  ph data[4]=0:6775c000 (2fff)
  get Phys(data[n=5+3000]=f7455000)
AtapiVirtToPhysAddr_: f7455000 -> 00000000:6775f000
  ph data[4]=0:6775c000 (3fff)
  get Phys(data[n=5+4000]=f7456000)
AtapiVirtToPhysAddr_: f7456000 -> 00000000:67760000
  set TERM
  ph data[4]=0:6775c000 (4fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000680, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x5, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520c18
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000700, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000700, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7457000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7457000)
AtapiVirtToPhysAddr_: f7457000 -> 00000000:67761000
  ph data[0]=0:67761000 (fff)
  get Phys(data[n=1+1000]=f7458000)
AtapiVirtToPhysAddr_: f7458000 -> 00000000:6776a000
  ph data[1]=0:6776a000 (fff)
  get Phys(data[n=2+1000]=f7459000)
AtapiVirtToPhysAddr_: f7459000 -> 00000000:6776b000
  ph data[1]=0:6776a000 (1fff)
  get Phys(data[n=2+2000]=f745a000)
AtapiVirtToPhysAddr_: f745a000 -> 00000000:67764000
  ph data[2]=0:67764000 (fff)
  get Phys(data[n=3+1000]=f745b000)
AtapiVirtToPhysAddr_: f745b000 -> 00000000:67765000
  ph data[2]=0:67764000 (1fff)
  get Phys(data[n=3+2000]=f745c000)
AtapiVirtToPhysAddr_: f745c000 -> 00000000:67766000
  ph data[2]=0:67764000 (2fff)
  get Phys(data[n=3+3000]=f745d000)
AtapiVirtToPhysAddr_: f745d000 -> 00000000:67767000
  ph data[2]=0:67764000 (3fff)
  get Phys(data[n=3+4000]=f745e000)
AtapiVirtToPhysAddr_: f745e000 -> 00000000:67768000
  ph data[2]=0:67764000 (4fff)
  get Phys(data[n=3+5000]=f745f000)
AtapiVirtToPhysAddr_: f745f000 -> 00000000:67769000
  ph data[2]=0:67764000 (5fff)
  get Phys(data[n=3+6000]=f7460000)
AtapiVirtToPhysAddr_: f7460000 -> 00000000:67772000
  ph data[3]=0:67772000 (fff)
  get Phys(data[n=4+1000]=f7461000)
AtapiVirtToPhysAddr_: f7461000 -> 00000000:67773000
  ph data[3]=0:67772000 (1fff)
  get Phys(data[n=4+2000]=f7462000)
AtapiVirtToPhysAddr_: f7462000 -> 00000000:6776c000
  ph data[4]=0:6776c000 (fff)
  get Phys(data[n=5+1000]=f7463000)
AtapiVirtToPhysAddr_: f7463000 -> 00000000:6776d000
  ph data[4]=0:6776c000 (1fff)
  get Phys(data[n=5+2000]=f7464000)
AtapiVirtToPhysAddr_: f7464000 -> 00000000:6776e000
  ph data[4]=0:6776c000 (2fff)
  get Phys(data[n=5+3000]=f7465000)
AtapiVirtToPhysAddr_: f7465000 -> 00000000:6776f000
  ph data[4]=0:6776c000 (3fff)
  get Phys(data[n=5+4000]=f7466000)
AtapiVirtToPhysAddr_: f7466000 -> 00000000:67770000
  set TERM
  ph data[4]=0:6776c000 (4fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520c18
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000780, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000780, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7467000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7467000)
AtapiVirtToPhysAddr_: f7467000 -> 00000000:67771000
  ph data[0]=0:67771000 (fff)
  get Phys(data[n=1+1000]=f7468000)
AtapiVirtToPhysAddr_: f7468000 -> 00000000:6777a000
  ph data[1]=0:6777a000 (fff)
  get Phys(data[n=2+1000]=f7469000)
AtapiVirtToPhysAddr_: f7469000 -> 00000000:6777b000
  ph data[1]=0:6777a000 (1fff)
  get Phys(data[n=2+2000]=f746a000)
AtapiVirtToPhysAddr_: f746a000 -> 00000000:67774000
  ph data[2]=0:67774000 (fff)
  get Phys(data[n=3+1000]=f746b000)
AtapiVirtToPhysAddr_: f746b000 -> 00000000:67775000
  ph data[2]=0:67774000 (1fff)
  get Phys(data[n=3+2000]=f746c000)
AtapiVirtToPhysAddr_: f746c000 -> 00000000:67776000
  ph data[2]=0:67774000 (2fff)
  get Phys(data[n=3+3000]=f746d000)
AtapiVirtToPhysAddr_: f746d000 -> 00000000:67777000
  ph data[2]=0:67774000 (3fff)
  get Phys(data[n=3+4000]=f746e000)
AtapiVirtToPhysAddr_: f746e000 -> 00000000:67778000
  ph data[2]=0:67774000 (4fff)
  get Phys(data[n=3+5000]=f746f000)
AtapiVirtToPhysAddr_: f746f000 -> 00000000:67779000
  ph data[2]=0:67774000 (5fff)
  get Phys(data[n=3+6000]=f7470000)
AtapiVirtToPhysAddr_: f7470000 -> 00000000:67782000
  ph data[3]=0:67782000 (fff)
  get Phys(data[n=4+1000]=f7471000)
AtapiVirtToPhysAddr_: f7471000 -> 00000000:67783000
  ph data[3]=0:67782000 (1fff)
  get Phys(data[n=4+2000]=f7472000)
AtapiVirtToPhysAddr_: f7472000 -> 00000000:6777c000
  ph data[4]=0:6777c000 (fff)
  get Phys(data[n=5+1000]=f7473000)
AtapiVirtToPhysAddr_: f7473000 -> 00000000:6777d000
  ph data[4]=0:6777c000 (1fff)
  get Phys(data[n=5+2000]=f7474000)
AtapiVirtToPhysAddr_: f7474000 -> 00000000:6777e000
  ph data[4]=0:6777c000 (2fff)
  get Phys(data[n=5+3000]=f7475000)
AtapiVirtToPhysAddr_: f7475000 -> 00000000:6777f000
  ph data[4]=0:6777c000 (3fff)
  get Phys(data[n=5+4000]=f7476000)
AtapiVirtToPhysAddr_: f7476000 -> 00000000:67780000
  set TERM
  ph data[4]=0:6777c000 (4fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520c18
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000800, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000800, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7477000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7477000)
AtapiVirtToPhysAddr_: f7477000 -> 00000000:67781000
  ph data[0]=0:67781000 (fff)
  get Phys(data[n=1+1000]=f7478000)
AtapiVirtToPhysAddr_: f7478000 -> 00000000:6778a000
  ph data[1]=0:6778a000 (fff)
  get Phys(data[n=2+1000]=f7479000)
AtapiVirtToPhysAddr_: f7479000 -> 00000000:6778b000
  ph data[1]=0:6778a000 (1fff)
  get Phys(data[n=2+2000]=f747a000)
AtapiVirtToPhysAddr_: f747a000 -> 00000000:67784000
  ph data[2]=0:67784000 (fff)
  get Phys(data[n=3+1000]=f747b000)
AtapiVirtToPhysAddr_: f747b000 -> 00000000:67785000
  ph data[2]=0:67784000 (1fff)
  get Phys(data[n=3+2000]=f747c000)
AtapiVirtToPhysAddr_: f747c000 -> 00000000:67786000
  ph data[2]=0:67784000 (2fff)
  get Phys(data[n=3+3000]=f747d000)
AtapiVirtToPhysAddr_: f747d000 -> 00000000:67787000
  ph data[2]=0:67784000 (3fff)
  get Phys(data[n=3+4000]=f747e000)
AtapiVirtToPhysAddr_: f747e000 -> 00000000:67788000
  ph data[2]=0:67784000 (4fff)
  get Phys(data[n=3+5000]=f747f000)
AtapiVirtToPhysAddr_: f747f000 -> 00000000:67789000
  ph data[2]=0:67784000 (5fff)
  get Phys(data[n=3+6000]=f7480000)
AtapiVirtToPhysAddr_: f7480000 -> 00000000:67792000
  ph data[3]=0:67792000 (fff)
  get Phys(data[n=4+1000]=f7481000)
AtapiVirtToPhysAddr_: f7481000 -> 00000000:67793000
  ph data[3]=0:67792000 (1fff)
  get Phys(data[n=4+2000]=f7482000)
AtapiVirtToPhysAddr_: f7482000 -> 00000000:6778c000
  ph data[4]=0:6778c000 (fff)
  get Phys(data[n=5+1000]=f7483000)
AtapiVirtToPhysAddr_: f7483000 -> 00000000:6778d000
  ph data[4]=0:6778c000 (1fff)
  get Phys(data[n=5+2000]=f7484000)
AtapiVirtToPhysAddr_: f7484000 -> 00000000:6778e000
  ph data[4]=0:6778c000 (2fff)
  get Phys(data[n=5+3000]=f7485000)
AtapiVirtToPhysAddr_: f7485000 -> 00000000:6778f000
  ph data[4]=0:6778c000 (3fff)
  get Phys(data[n=5+4000]=f7486000)
AtapiVirtToPhysAddr_: f7486000 -> 00000000:67790000
  set TERM
  ph data[4]=0:6778c000 (4fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb67194b8
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000700, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x5, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb67194b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb67194b8
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a10
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000780, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x5, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf78019e4
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000800, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x5, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000680, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 39000680, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7510000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7510000)
AtapiVirtToPhysAddr_: f7510000 -> 00000000:662a1000
  ph data[0]=0:662a1000 (fff)
  get Phys(data[n=1+1000]=f7511000)
AtapiVirtToPhysAddr_: f7511000 -> 00000000:662a2000
  set TERM
  ph data[0]=0:662a1000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000680, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\win32k.sys at F71C8000 with 2bf pages
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000880, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000880, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7188000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7188000)
AtapiVirtToPhysAddr_: f7188000 -> 00000000:66292000
  ph data[0]=0:66292000 (fff)
  get Phys(data[n=1+1000]=f7189000)
AtapiVirtToPhysAddr_: f7189000 -> 00000000:6628b000
  ph data[1]=0:6628b000 (fff)
  get Phys(data[n=2+1000]=f718a000)
AtapiVirtToPhysAddr_: f718a000 -> 00000000:6628c000
  ph data[1]=0:6628b000 (1fff)
  get Phys(data[n=2+2000]=f718b000)
AtapiVirtToPhysAddr_: f718b000 -> 00000000:6628d000
  ph data[1]=0:6628b000 (2fff)
  get Phys(data[n=2+3000]=f718c000)
AtapiVirtToPhysAddr_: f718c000 -> 00000000:6628e000
  ph data[1]=0:6628b000 (3fff)
  get Phys(data[n=2+4000]=f718d000)
AtapiVirtToPhysAddr_: f718d000 -> 00000000:6628f000
  ph data[1]=0:6628b000 (4fff)
  get Phys(data[n=2+5000]=f718e000)
AtapiVirtToPhysAddr_: f718e000 -> 00000000:66290000
  ph data[1]=0:6628b000 (5fff)
  get Phys(data[n=2+6000]=f718f000)
AtapiVirtToPhysAddr_: f718f000 -> 00000000:66291000
  ph data[1]=0:6628b000 (6fff)
  get Phys(data[n=2+7000]=f7190000)
AtapiVirtToPhysAddr_: f7190000 -> 00000000:6629a000
  ph data[2]=0:6629a000 (fff)
  get Phys(data[n=3+1000]=f7191000)
AtapiVirtToPhysAddr_: f7191000 -> 00000000:66293000
  ph data[3]=0:66293000 (fff)
  get Phys(data[n=4+1000]=f7192000)
AtapiVirtToPhysAddr_: f7192000 -> 00000000:66294000
  ph data[3]=0:66293000 (1fff)
  get Phys(data[n=4+2000]=f7193000)
AtapiVirtToPhysAddr_: f7193000 -> 00000000:66295000
  ph data[3]=0:66293000 (2fff)
  get Phys(data[n=4+3000]=f7194000)
AtapiVirtToPhysAddr_: f7194000 -> 00000000:66296000
  ph data[3]=0:66293000 (3fff)
  get Phys(data[n=4+4000]=f7195000)
AtapiVirtToPhysAddr_: f7195000 -> 00000000:66297000
  ph data[3]=0:66293000 (4fff)
  get Phys(data[n=4+5000]=f7196000)
AtapiVirtToPhysAddr_: f7196000 -> 00000000:66298000
  ph data[3]=0:66293000 (5fff)
  get Phys(data[n=4+6000]=f7197000)
AtapiVirtToPhysAddr_: f7197000 -> 00000000:66299000
  set TERM
  ph data[3]=0:66293000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000880, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000900, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000900, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7198000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7198000)
AtapiVirtToPhysAddr_: f7198000 -> 00000000:662aa000
  ph data[0]=0:662aa000 (fff)
  get Phys(data[n=1+1000]=f7199000)
AtapiVirtToPhysAddr_: f7199000 -> 00000000:6629b000
  ph data[1]=0:6629b000 (fff)
  get Phys(data[n=2+1000]=f719a000)
AtapiVirtToPhysAddr_: f719a000 -> 00000000:6629c000
  ph data[1]=0:6629b000 (1fff)
  get Phys(data[n=2+2000]=f719b000)
AtapiVirtToPhysAddr_: f719b000 -> 00000000:6629d000
  ph data[1]=0:6629b000 (2fff)
  get Phys(data[n=2+3000]=f719c000)
AtapiVirtToPhysAddr_: f719c000 -> 00000000:6629e000
  ph data[1]=0:6629b000 (3fff)
  get Phys(data[n=2+4000]=f719d000)
AtapiVirtToPhysAddr_: f719d000 -> 00000000:6629f000
  ph data[1]=0:6629b000 (4fff)
  get Phys(data[n=2+5000]=f719e000)
AtapiVirtToPhysAddr_: f719e000 -> 00000000:662a0000
  ph data[1]=0:6629b000 (5fff)
  get Phys(data[n=2+6000]=f719f000)
AtapiVirtToPhysAddr_: f719f000 -> 00000000:662a9000
  ph data[2]=0:662a9000 (fff)
  get Phys(data[n=3+1000]=f71a0000)
AtapiVirtToPhysAddr_: f71a0000 -> 00000000:662b2000
  ph data[3]=0:662b2000 (fff)
  get Phys(data[n=4+1000]=f71a1000)
AtapiVirtToPhysAddr_: f71a1000 -> 00000000:662a3000
  ph data[4]=0:662a3000 (fff)
  get Phys(data[n=5+1000]=f71a2000)
AtapiVirtToPhysAddr_: f71a2000 -> 00000000:662a4000
  ph data[4]=0:662a3000 (1fff)
  get Phys(data[n=5+2000]=f71a3000)
AtapiVirtToPhysAddr_: f71a3000 -> 00000000:662a5000
  ph data[4]=0:662a3000 (2fff)
  get Phys(data[n=5+3000]=f71a4000)
AtapiVirtToPhysAddr_: f71a4000 -> 00000000:662a6000
  ph data[4]=0:662a3000 (3fff)
  get Phys(data[n=5+4000]=f71a5000)
AtapiVirtToPhysAddr_: f71a5000 -> 00000000:662a7000
  ph data[4]=0:662a3000 (4fff)
  get Phys(data[n=5+5000]=f71a6000)
AtapiVirtToPhysAddr_: f71a6000 -> 00000000:662a8000
  ph data[4]=0:662a3000 (5fff)
  get Phys(data[n=5+6000]=f71a7000)
AtapiVirtToPhysAddr_: f71a7000 -> 00000000:662b1000
  set TERM
  ph data[5]=0:662b1000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000980, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000980, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f71a8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f71a8000)
AtapiVirtToPhysAddr_: f71a8000 -> 00000000:662ba000
  ph data[0]=0:662ba000 (fff)
  get Phys(data[n=1+1000]=f71a9000)
AtapiVirtToPhysAddr_: f71a9000 -> 00000000:662ab000
  ph data[1]=0:662ab000 (fff)
  get Phys(data[n=2+1000]=f71aa000)
AtapiVirtToPhysAddr_: f71aa000 -> 00000000:662ac000
  ph data[1]=0:662ab000 (1fff)
  get Phys(data[n=2+2000]=f71ab000)
AtapiVirtToPhysAddr_: f71ab000 -> 00000000:662ad000
  ph data[1]=0:662ab000 (2fff)
  get Phys(data[n=2+3000]=f71ac000)
AtapiVirtToPhysAddr_: f71ac000 -> 00000000:662ae000
  ph data[1]=0:662ab000 (3fff)
  get Phys(data[n=2+4000]=f71ad000)
AtapiVirtToPhysAddr_: f71ad000 -> 00000000:662af000
  ph data[1]=0:662ab000 (4fff)
  get Phys(data[n=2+5000]=f71ae000)
AtapiVirtToPhysAddr_: f71ae000 -> 00000000:662b0000
  ph data[1]=0:662ab000 (5fff)
  get Phys(data[n=2+6000]=f71af000)
AtapiVirtToPhysAddr_: f71af000 -> 00000000:662b9000
  ph data[2]=0:662b9000 (fff)
  get Phys(data[n=3+1000]=f71b0000)
AtapiVirtToPhysAddr_: f71b0000 -> 00000000:662c2000
  ph data[3]=0:662c2000 (fff)
  get Phys(data[n=4+1000]=f71b1000)
AtapiVirtToPhysAddr_: f71b1000 -> 00000000:662b3000
  ph data[4]=0:662b3000 (fff)
  get Phys(data[n=5+1000]=f71b2000)
AtapiVirtToPhysAddr_: f71b2000 -> 00000000:662b4000
  ph data[4]=0:662b3000 (1fff)
  get Phys(data[n=5+2000]=f71b3000)
AtapiVirtToPhysAddr_: f71b3000 -> 00000000:662b5000
  ph data[4]=0:662b3000 (2fff)
  get Phys(data[n=5+3000]=f71b4000)
AtapiVirtToPhysAddr_: f71b4000 -> 00000000:662b6000
  ph data[4]=0:662b3000 (3fff)
  get Phys(data[n=5+4000]=f71b5000)
AtapiVirtToPhysAddr_: f71b5000 -> 00000000:662b7000
  ph data[4]=0:662b3000 (4fff)
  get Phys(data[n=5+5000]=f71b6000)
AtapiVirtToPhysAddr_: f71b6000 -> 00000000:662b8000
  ph data[4]=0:662b3000 (5fff)
  get Phys(data[n=5+6000]=f71b7000)
AtapiVirtToPhysAddr_: f71b7000 -> 00000000:662c1000
  set TERM
  ph data[5]=0:662c1000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520e90
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000900, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x6, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000a00, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000a00, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f71b8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f71b8000)
AtapiVirtToPhysAddr_: f71b8000 -> 00000000:662ca000
  ph data[0]=0:662ca000 (fff)
  get Phys(data[n=1+1000]=f71b9000)
AtapiVirtToPhysAddr_: f71b9000 -> 00000000:662bb000
  ph data[1]=0:662bb000 (fff)
  get Phys(data[n=2+1000]=f71ba000)
AtapiVirtToPhysAddr_: f71ba000 -> 00000000:662bc000
  ph data[1]=0:662bb000 (1fff)
  get Phys(data[n=2+2000]=f71bb000)
AtapiVirtToPhysAddr_: f71bb000 -> 00000000:662bd000
  ph data[1]=0:662bb000 (2fff)
  get Phys(data[n=2+3000]=f71bc000)
AtapiVirtToPhysAddr_: f71bc000 -> 00000000:662be000
  ph data[1]=0:662bb000 (3fff)
  get Phys(data[n=2+4000]=f71bd000)
AtapiVirtToPhysAddr_: f71bd000 -> 00000000:662bf000
  ph data[1]=0:662bb000 (4fff)
  get Phys(data[n=2+5000]=f71be000)
AtapiVirtToPhysAddr_: f71be000 -> 00000000:662c0000
  ph data[1]=0:662bb000 (5fff)
  get Phys(data[n=2+6000]=f71bf000)
AtapiVirtToPhysAddr_: f71bf000 -> 00000000:662c9000
  ph data[2]=0:662c9000 (fff)
  get Phys(data[n=3+1000]=f71c0000)
AtapiVirtToPhysAddr_: f71c0000 -> 00000000:662d2000
  ph data[3]=0:662d2000 (fff)
  get Phys(data[n=4+1000]=f71c1000)
AtapiVirtToPhysAddr_: f71c1000 -> 00000000:662c3000
  ph data[4]=0:662c3000 (fff)
  get Phys(data[n=5+1000]=f71c2000)
AtapiVirtToPhysAddr_: f71c2000 -> 00000000:662c4000
  ph data[4]=0:662c3000 (1fff)
  get Phys(data[n=5+2000]=f71c3000)
AtapiVirtToPhysAddr_: f71c3000 -> 00000000:662c5000
  ph data[4]=0:662c3000 (2fff)
  get Phys(data[n=5+3000]=f71c4000)
AtapiVirtToPhysAddr_: f71c4000 -> 00000000:662c6000
  ph data[4]=0:662c3000 (3fff)
  get Phys(data[n=5+4000]=f71c5000)
AtapiVirtToPhysAddr_: f71c5000 -> 00000000:662c7000
  ph data[4]=0:662c3000 (4fff)
  get Phys(data[n=5+5000]=f71c6000)
AtapiVirtToPhysAddr_: f71c6000 -> 00000000:662c8000
  ph data[4]=0:662c3000 (5fff)
  get Phys(data[n=5+6000]=f71c7000)
AtapiVirtToPhysAddr_: f71c7000 -> 00000000:662d1000
  set TERM
  ph data[5]=0:662d1000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb67194b8
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520f18
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000980, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x6, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb67194b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb67194b8
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7665654
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000a00, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x6, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7665468
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39609a60, OrigWordsRequested 0x2100, DevSize 0x21
IdeReadWrite (REQ): Starting sector is 39609a60, Number of WORDS 0x2100, DevSize 0x21
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f74fa000, count 4200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:662da000
  ph data[0]=0:662da000 (fff)
  get Phys(data[n=1+1000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:662cb000
  ph data[1]=0:662cb000 (fff)
  get Phys(data[n=2+1000]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:662cc000
  ph data[1]=0:662cb000 (1fff)
  get Phys(data[n=2+2000]=f74fd000)
AtapiVirtToPhysAddr_: f74fd000 -> 00000000:662cd000
  ph data[1]=0:662cb000 (2fff)
  get Phys(data[n=2+3000]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:662ce000
  set TERM
  ph data[1]=0:662cb000 (31ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb67194b8
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39609a60, Count 0x21(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x2, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000a80, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000a80, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7188000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7188000)
AtapiVirtToPhysAddr_: f7188000 -> 00000000:65f72000
  ph data[0]=0:65f72000 (fff)
  get Phys(data[n=1+1000]=f7189000)
AtapiVirtToPhysAddr_: f7189000 -> 00000000:65f73000
  ph data[0]=0:65f72000 (1fff)
  get Phys(data[n=1+2000]=f718a000)
AtapiVirtToPhysAddr_: f718a000 -> 00000000:65f74000
  ph data[0]=0:65f72000 (2fff)
  get Phys(data[n=1+3000]=f718b000)
AtapiVirtToPhysAddr_: f718b000 -> 00000000:65f75000
  ph data[0]=0:65f72000 (3fff)
  get Phys(data[n=1+4000]=f718c000)
AtapiVirtToPhysAddr_: f718c000 -> 00000000:65f76000
  ph data[0]=0:65f72000 (4fff)
  get Phys(data[n=1+5000]=f718d000)
AtapiVirtToPhysAddr_: f718d000 -> 00000000:65f77000
  ph data[0]=0:65f72000 (5fff)
  get Phys(data[n=1+6000]=f718e000)
AtapiVirtToPhysAddr_: f718e000 -> 00000000:65f78000
  ph data[0]=0:65f72000 (6fff)
  get Phys(data[n=1+7000]=f718f000)
AtapiVirtToPhysAddr_: f718f000 -> 00000000:65f71000
  ph data[1]=0:65f71000 (fff)
  get Phys(data[n=2+1000]=f7190000)
AtapiVirtToPhysAddr_: f7190000 -> 00000000:65f7a000
  ph data[2]=0:65f7a000 (fff)
  get Phys(data[n=3+1000]=f7191000)
AtapiVirtToPhysAddr_: f7191000 -> 00000000:65f7b000
  ph data[2]=0:65f7a000 (1fff)
  get Phys(data[n=3+2000]=f7192000)
AtapiVirtToPhysAddr_: f7192000 -> 00000000:65f7c000
  ph data[2]=0:65f7a000 (2fff)
  get Phys(data[n=3+3000]=f7193000)
AtapiVirtToPhysAddr_: f7193000 -> 00000000:65f7d000
  ph data[2]=0:65f7a000 (3fff)
  get Phys(data[n=3+4000]=f7194000)
AtapiVirtToPhysAddr_: f7194000 -> 00000000:65f7e000
  ph data[2]=0:65f7a000 (4fff)
  get Phys(data[n=3+5000]=f7195000)
AtapiVirtToPhysAddr_: f7195000 -> 00000000:65f7f000
  ph data[2]=0:65f7a000 (5fff)
  get Phys(data[n=3+6000]=f7196000)
AtapiVirtToPhysAddr_: f7196000 -> 00000000:65f80000
  ph data[2]=0:65f7a000 (6fff)
  get Phys(data[n=3+7000]=f7197000)
AtapiVirtToPhysAddr_: f7197000 -> 00000000:65f79000
  set TERM
  ph data[3]=0:65f79000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000b00, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000b00, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7198000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7198000)
AtapiVirtToPhysAddr_: f7198000 -> 00000000:65f82000
  ph data[0]=0:65f82000 (fff)
  get Phys(data[n=1+1000]=f7199000)
AtapiVirtToPhysAddr_: f7199000 -> 00000000:65f83000
  ph data[0]=0:65f82000 (1fff)
  get Phys(data[n=1+2000]=f719a000)
AtapiVirtToPhysAddr_: f719a000 -> 00000000:65f84000
  ph data[0]=0:65f82000 (2fff)
  get Phys(data[n=1+3000]=f719b000)
AtapiVirtToPhysAddr_: f719b000 -> 00000000:65f85000
  ph data[0]=0:65f82000 (3fff)
  get Phys(data[n=1+4000]=f719c000)
AtapiVirtToPhysAddr_: f719c000 -> 00000000:65f86000
  ph data[0]=0:65f82000 (4fff)
  get Phys(data[n=1+5000]=f719d000)
AtapiVirtToPhysAddr_: f719d000 -> 00000000:65f87000
  ph data[0]=0:65f82000 (5fff)
  get Phys(data[n=1+6000]=f719e000)
AtapiVirtToPhysAddr_: f719e000 -> 00000000:65f88000
  ph data[0]=0:65f82000 (6fff)
  get Phys(data[n=1+7000]=f719f000)
AtapiVirtToPhysAddr_: f719f000 -> 00000000:65f81000
  ph data[1]=0:65f81000 (fff)
  get Phys(data[n=2+1000]=f71a0000)
AtapiVirtToPhysAddr_: f71a0000 -> 00000000:65f8a000
  ph data[2]=0:65f8a000 (fff)
  get Phys(data[n=3+1000]=f71a1000)
AtapiVirtToPhysAddr_: f71a1000 -> 00000000:65f8b000
  ph data[2]=0:65f8a000 (1fff)
  get Phys(data[n=3+2000]=f71a2000)
AtapiVirtToPhysAddr_: f71a2000 -> 00000000:65f8c000
  ph data[2]=0:65f8a000 (2fff)
  get Phys(data[n=3+3000]=f71a3000)
AtapiVirtToPhysAddr_: f71a3000 -> 00000000:65f8d000
  ph data[2]=0:65f8a000 (3fff)
  get Phys(data[n=3+4000]=f71a4000)
AtapiVirtToPhysAddr_: f71a4000 -> 00000000:65f8e000
  ph data[2]=0:65f8a000 (4fff)
  get Phys(data[n=3+5000]=f71a5000)
AtapiVirtToPhysAddr_: f71a5000 -> 00000000:65f8f000
  ph data[2]=0:65f8a000 (5fff)
  get Phys(data[n=3+6000]=f71a6000)
AtapiVirtToPhysAddr_: f71a6000 -> 00000000:65f90000
  ph data[2]=0:65f8a000 (6fff)
  get Phys(data[n=3+7000]=f71a7000)
AtapiVirtToPhysAddr_: f71a7000 -> 00000000:65f89000
  set TERM
  ph data[3]=0:65f89000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000b80, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000b80, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f71a8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f71a8000)
AtapiVirtToPhysAddr_: f71a8000 -> 00000000:65f92000
  ph data[0]=0:65f92000 (fff)
  get Phys(data[n=1+1000]=f71a9000)
AtapiVirtToPhysAddr_: f71a9000 -> 00000000:65f93000
  ph data[0]=0:65f92000 (1fff)
  get Phys(data[n=1+2000]=f71aa000)
AtapiVirtToPhysAddr_: f71aa000 -> 00000000:65f94000
  ph data[0]=0:65f92000 (2fff)
  get Phys(data[n=1+3000]=f71ab000)
AtapiVirtToPhysAddr_: f71ab000 -> 00000000:65f95000
  ph data[0]=0:65f92000 (3fff)
  get Phys(data[n=1+4000]=f71ac000)
AtapiVirtToPhysAddr_: f71ac000 -> 00000000:65f96000
  ph data[0]=0:65f92000 (4fff)
  get Phys(data[n=1+5000]=f71ad000)
AtapiVirtToPhysAddr_: f71ad000 -> 00000000:65f97000
  ph data[0]=0:65f92000 (5fff)
  get Phys(data[n=1+6000]=f71ae000)
AtapiVirtToPhysAddr_: f71ae000 -> 00000000:65f98000
  ph data[0]=0:65f92000 (6fff)
  get Phys(data[n=1+7000]=f71af000)
AtapiVirtToPhysAddr_: f71af000 -> 00000000:65f91000
  ph data[1]=0:65f91000 (fff)
  get Phys(data[n=2+1000]=f71b0000)
AtapiVirtToPhysAddr_: f71b0000 -> 00000000:65f9a000
  ph data[2]=0:65f9a000 (fff)
  get Phys(data[n=3+1000]=f71b1000)
AtapiVirtToPhysAddr_: f71b1000 -> 00000000:65f9b000
  ph data[2]=0:65f9a000 (1fff)
  get Phys(data[n=3+2000]=f71b2000)
AtapiVirtToPhysAddr_: f71b2000 -> 00000000:65f9c000
  ph data[2]=0:65f9a000 (2fff)
  get Phys(data[n=3+3000]=f71b3000)
AtapiVirtToPhysAddr_: f71b3000 -> 00000000:65f9d000
  ph data[2]=0:65f9a000 (3fff)
  get Phys(data[n=3+4000]=f71b4000)
AtapiVirtToPhysAddr_: f71b4000 -> 00000000:65f9e000
  ph data[2]=0:65f9a000 (4fff)
  get Phys(data[n=3+5000]=f71b5000)
AtapiVirtToPhysAddr_: f71b5000 -> 00000000:65f9f000
  ph data[2]=0:65f9a000 (5fff)
  get Phys(data[n=3+6000]=f71b6000)
AtapiVirtToPhysAddr_: f71b6000 -> 00000000:65fa0000
  ph data[2]=0:65f9a000 (6fff)
  get Phys(data[n=3+7000]=f71b7000)
AtapiVirtToPhysAddr_: f71b7000 -> 00000000:65f99000
  set TERM
  ph data[3]=0:65f99000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64f3618, CDB 0xb64f3648, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=4
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000c00, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000c00, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f71b8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f71b8000)
AtapiVirtToPhysAddr_: f71b8000 -> 00000000:65fa2000
  ph data[0]=0:65fa2000 (fff)
  get Phys(data[n=1+1000]=f71b9000)
AtapiVirtToPhysAddr_: f71b9000 -> 00000000:65fa3000
  ph data[0]=0:65fa2000 (1fff)
  get Phys(data[n=1+2000]=f71ba000)
AtapiVirtToPhysAddr_: f71ba000 -> 00000000:65fa4000
  ph data[0]=0:65fa2000 (2fff)
  get Phys(data[n=1+3000]=f71bb000)
AtapiVirtToPhysAddr_: f71bb000 -> 00000000:65fa5000
  ph data[0]=0:65fa2000 (3fff)
  get Phys(data[n=1+4000]=f71bc000)
AtapiVirtToPhysAddr_: f71bc000 -> 00000000:65fa6000
  ph data[0]=0:65fa2000 (4fff)
  get Phys(data[n=1+5000]=f71bd000)
AtapiVirtToPhysAddr_: f71bd000 -> 00000000:65fa7000
  ph data[0]=0:65fa2000 (5fff)
  get Phys(data[n=1+6000]=f71be000)
AtapiVirtToPhysAddr_: f71be000 -> 00000000:65fa8000
  ph data[0]=0:65fa2000 (6fff)
  get Phys(data[n=1+7000]=f71bf000)
AtapiVirtToPhysAddr_: f71bf000 -> 00000000:65fa1000
  ph data[1]=0:65fa1000 (fff)
  get Phys(data[n=2+1000]=f71c0000)
AtapiVirtToPhysAddr_: f71c0000 -> 00000000:65faa000
  ph data[2]=0:65faa000 (fff)
  get Phys(data[n=3+1000]=f71c1000)
AtapiVirtToPhysAddr_: f71c1000 -> 00000000:65fab000
  ph data[2]=0:65faa000 (1fff)
  get Phys(data[n=3+2000]=f71c2000)
AtapiVirtToPhysAddr_: f71c2000 -> 00000000:65fac000
  ph data[2]=0:65faa000 (2fff)
  get Phys(data[n=3+3000]=f71c3000)
AtapiVirtToPhysAddr_: f71c3000 -> 00000000:65fad000
  ph data[2]=0:65faa000 (3fff)
  get Phys(data[n=3+4000]=f71c4000)
AtapiVirtToPhysAddr_: f71c4000 -> 00000000:65fae000
  ph data[2]=0:65faa000 (4fff)
  get Phys(data[n=3+5000]=f71c5000)
AtapiVirtToPhysAddr_: f71c5000 -> 00000000:65faf000
  ph data[2]=0:65faa000 (5fff)
  get Phys(data[n=3+6000]=f71c6000)
AtapiVirtToPhysAddr_: f71c6000 -> 00000000:65fb0000
  ph data[2]=0:65faa000 (6fff)
  get Phys(data[n=3+7000]=f71c7000)
AtapiVirtToPhysAddr_: f71c7000 -> 00000000:65fa9000
  set TERM
  ph data[3]=0:65fa9000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 5 request(s)!
AtapiStartIo: next Srb b64f3618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 2100, WordsLeft 2100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 4200, full size 4200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb67194b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb67194b8
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=4
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000a80, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000b00, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf78019e4
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000b80, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb64f3618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64f3618, CDB 0xb64f3648, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000c00, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x4, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64f3618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64f3618, status 1
AtapiInterrupt: RequestComplete, srb 0xb64f3618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000c80, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000c80, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7188000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7188000)
AtapiVirtToPhysAddr_: f7188000 -> 00000000:647a2000
  ph data[0]=0:647a2000 (fff)
  get Phys(data[n=1+1000]=f7189000)
AtapiVirtToPhysAddr_: f7189000 -> 00000000:647a3000
  ph data[0]=0:647a2000 (1fff)
  get Phys(data[n=1+2000]=f718a000)
AtapiVirtToPhysAddr_: f718a000 -> 00000000:6479c000
  ph data[1]=0:6479c000 (fff)
  get Phys(data[n=2+1000]=f718b000)
AtapiVirtToPhysAddr_: f718b000 -> 00000000:6479d000
  ph data[1]=0:6479c000 (1fff)
  get Phys(data[n=2+2000]=f718c000)
AtapiVirtToPhysAddr_: f718c000 -> 00000000:6479e000
  ph data[1]=0:6479c000 (2fff)
  get Phys(data[n=2+3000]=f718d000)
AtapiVirtToPhysAddr_: f718d000 -> 00000000:6479f000
  ph data[1]=0:6479c000 (3fff)
  get Phys(data[n=2+4000]=f718e000)
AtapiVirtToPhysAddr_: f718e000 -> 00000000:647a0000
  ph data[1]=0:6479c000 (4fff)
  get Phys(data[n=2+5000]=f718f000)
AtapiVirtToPhysAddr_: f718f000 -> 00000000:647a1000
  ph data[1]=0:6479c000 (5fff)
  get Phys(data[n=2+6000]=f7190000)
AtapiVirtToPhysAddr_: f7190000 -> 00000000:647aa000
  ph data[2]=0:647aa000 (fff)
  get Phys(data[n=3+1000]=f7191000)
AtapiVirtToPhysAddr_: f7191000 -> 00000000:647ab000
  ph data[2]=0:647aa000 (1fff)
  get Phys(data[n=3+2000]=f7192000)
AtapiVirtToPhysAddr_: f7192000 -> 00000000:647a4000
  ph data[3]=0:647a4000 (fff)
  get Phys(data[n=4+1000]=f7193000)
AtapiVirtToPhysAddr_: f7193000 -> 00000000:647a5000
  ph data[3]=0:647a4000 (1fff)
  get Phys(data[n=4+2000]=f7194000)
AtapiVirtToPhysAddr_: f7194000 -> 00000000:647a6000
  ph data[3]=0:647a4000 (2fff)
  get Phys(data[n=4+3000]=f7195000)
AtapiVirtToPhysAddr_: f7195000 -> 00000000:647a7000
  ph data[3]=0:647a4000 (3fff)
  get Phys(data[n=4+4000]=f7196000)
AtapiVirtToPhysAddr_: f7196000 -> 00000000:647a8000
  ph data[3]=0:647a4000 (4fff)
  get Phys(data[n=4+5000]=f7197000)
AtapiVirtToPhysAddr_: f7197000 -> 00000000:647a9000
  set TERM
  ph data[3]=0:647a4000 (5fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000c80, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x4, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000d00, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000d00, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7198000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7198000)
AtapiVirtToPhysAddr_: f7198000 -> 00000000:647b2000
  ph data[0]=0:647b2000 (fff)
  get Phys(data[n=1+1000]=f7199000)
AtapiVirtToPhysAddr_: f7199000 -> 00000000:647b3000
  ph data[0]=0:647b2000 (1fff)
  get Phys(data[n=1+2000]=f719a000)
AtapiVirtToPhysAddr_: f719a000 -> 00000000:647ac000
  ph data[1]=0:647ac000 (fff)
  get Phys(data[n=2+1000]=f719b000)
AtapiVirtToPhysAddr_: f719b000 -> 00000000:647ad000
  ph data[1]=0:647ac000 (1fff)
  get Phys(data[n=2+2000]=f719c000)
AtapiVirtToPhysAddr_: f719c000 -> 00000000:647ae000
  ph data[1]=0:647ac000 (2fff)
  get Phys(data[n=2+3000]=f719d000)
AtapiVirtToPhysAddr_: f719d000 -> 00000000:647af000
  ph data[1]=0:647ac000 (3fff)
  get Phys(data[n=2+4000]=f719e000)
AtapiVirtToPhysAddr_: f719e000 -> 00000000:647b0000
  ph data[1]=0:647ac000 (4fff)
  get Phys(data[n=2+5000]=f719f000)
AtapiVirtToPhysAddr_: f719f000 -> 00000000:647b1000
  ph data[1]=0:647ac000 (5fff)
  get Phys(data[n=2+6000]=f71a0000)
AtapiVirtToPhysAddr_: f71a0000 -> 00000000:647ba000
  ph data[2]=0:647ba000 (fff)
  get Phys(data[n=3+1000]=f71a1000)
AtapiVirtToPhysAddr_: f71a1000 -> 00000000:647bb000
  ph data[2]=0:647ba000 (1fff)
  get Phys(data[n=3+2000]=f71a2000)
AtapiVirtToPhysAddr_: f71a2000 -> 00000000:647b4000
  ph data[3]=0:647b4000 (fff)
  get Phys(data[n=4+1000]=f71a3000)
AtapiVirtToPhysAddr_: f71a3000 -> 00000000:647b5000
  ph data[3]=0:647b4000 (1fff)
  get Phys(data[n=4+2000]=f71a4000)
AtapiVirtToPhysAddr_: f71a4000 -> 00000000:647b6000
  ph data[3]=0:647b4000 (2fff)
  get Phys(data[n=4+3000]=f71a5000)
AtapiVirtToPhysAddr_: f71a5000 -> 00000000:647b7000
  ph data[3]=0:647b4000 (3fff)
  get Phys(data[n=4+4000]=f71a6000)
AtapiVirtToPhysAddr_: f71a6000 -> 00000000:647b8000
  ph data[3]=0:647b4000 (4fff)
  get Phys(data[n=4+5000]=f71a7000)
AtapiVirtToPhysAddr_: f71a7000 -> 00000000:647b9000
  set TERM
  ph data[3]=0:647b4000 (5fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000d80, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000d80, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f71a8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f71a8000)
AtapiVirtToPhysAddr_: f71a8000 -> 00000000:647c2000
  ph data[0]=0:647c2000 (fff)
  get Phys(data[n=1+1000]=f71a9000)
AtapiVirtToPhysAddr_: f71a9000 -> 00000000:647c3000
  ph data[0]=0:647c2000 (1fff)
  get Phys(data[n=1+2000]=f71aa000)
AtapiVirtToPhysAddr_: f71aa000 -> 00000000:647bc000
  ph data[1]=0:647bc000 (fff)
  get Phys(data[n=2+1000]=f71ab000)
AtapiVirtToPhysAddr_: f71ab000 -> 00000000:647bd000
  ph data[1]=0:647bc000 (1fff)
  get Phys(data[n=2+2000]=f71ac000)
AtapiVirtToPhysAddr_: f71ac000 -> 00000000:647be000
  ph data[1]=0:647bc000 (2fff)
  get Phys(data[n=2+3000]=f71ad000)
AtapiVirtToPhysAddr_: f71ad000 -> 00000000:647bf000
  ph data[1]=0:647bc000 (3fff)
  get Phys(data[n=2+4000]=f71ae000)
AtapiVirtToPhysAddr_: f71ae000 -> 00000000:647c0000
  ph data[1]=0:647bc000 (4fff)
  get Phys(data[n=2+5000]=f71af000)
AtapiVirtToPhysAddr_: f71af000 -> 00000000:647c1000
  ph data[1]=0:647bc000 (5fff)
  get Phys(data[n=2+6000]=f71b0000)
AtapiVirtToPhysAddr_: f71b0000 -> 00000000:647ca000
  ph data[2]=0:647ca000 (fff)
  get Phys(data[n=3+1000]=f71b1000)
AtapiVirtToPhysAddr_: f71b1000 -> 00000000:647cb000
  ph data[2]=0:647ca000 (1fff)
  get Phys(data[n=3+2000]=f71b2000)
AtapiVirtToPhysAddr_: f71b2000 -> 00000000:647c4000
  ph data[3]=0:647c4000 (fff)
  get Phys(data[n=4+1000]=f71b3000)
AtapiVirtToPhysAddr_: f71b3000 -> 00000000:647c5000
  ph data[3]=0:647c4000 (1fff)
  get Phys(data[n=4+2000]=f71b4000)
AtapiVirtToPhysAddr_: f71b4000 -> 00000000:647c6000
  ph data[3]=0:647c4000 (2fff)
  get Phys(data[n=4+3000]=f71b5000)
AtapiVirtToPhysAddr_: f71b5000 -> 00000000:647c7000
  ph data[3]=0:647c4000 (3fff)
  get Phys(data[n=4+4000]=f71b6000)
AtapiVirtToPhysAddr_: f71b6000 -> 00000000:647c8000
  ph data[3]=0:647c4000 (4fff)
  get Phys(data[n=4+5000]=f71b7000)
AtapiVirtToPhysAddr_: f71b7000 -> 00000000:647c9000
  set TERM
  ph data[3]=0:647c4000 (5fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ec8
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000d00, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000e00, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000e00, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f71b8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f71b8000)
AtapiVirtToPhysAddr_: f71b8000 -> 00000000:647d2000
  ph data[0]=0:647d2000 (fff)
  get Phys(data[n=1+1000]=f71b9000)
AtapiVirtToPhysAddr_: f71b9000 -> 00000000:647d3000
  ph data[0]=0:647d2000 (1fff)
  get Phys(data[n=1+2000]=f71ba000)
AtapiVirtToPhysAddr_: f71ba000 -> 00000000:647cc000
  ph data[1]=0:647cc000 (fff)
  get Phys(data[n=2+1000]=f71bb000)
AtapiVirtToPhysAddr_: f71bb000 -> 00000000:647cd000
  ph data[1]=0:647cc000 (1fff)
  get Phys(data[n=2+2000]=f71bc000)
AtapiVirtToPhysAddr_: f71bc000 -> 00000000:647ce000
  ph data[1]=0:647cc000 (2fff)
  get Phys(data[n=2+3000]=f71bd000)
AtapiVirtToPhysAddr_: f71bd000 -> 00000000:647cf000
  ph data[1]=0:647cc000 (3fff)
  get Phys(data[n=2+4000]=f71be000)
AtapiVirtToPhysAddr_: f71be000 -> 00000000:647d0000
  ph data[1]=0:647cc000 (4fff)
  get Phys(data[n=2+5000]=f71bf000)
AtapiVirtToPhysAddr_: f71bf000 -> 00000000:647d1000
  ph data[1]=0:647cc000 (5fff)
  get Phys(data[n=2+6000]=f71c0000)
AtapiVirtToPhysAddr_: f71c0000 -> 00000000:647da000
  ph data[2]=0:647da000 (fff)
  get Phys(data[n=3+1000]=f71c1000)
AtapiVirtToPhysAddr_: f71c1000 -> 00000000:647db000
  ph data[2]=0:647da000 (1fff)
  get Phys(data[n=3+2000]=f71c2000)
AtapiVirtToPhysAddr_: f71c2000 -> 00000000:647d4000
  ph data[3]=0:647d4000 (fff)
  get Phys(data[n=4+1000]=f71c3000)
AtapiVirtToPhysAddr_: f71c3000 -> 00000000:647d5000
  ph data[3]=0:647d4000 (1fff)
  get Phys(data[n=4+2000]=f71c4000)
AtapiVirtToPhysAddr_: f71c4000 -> 00000000:647d6000
  ph data[3]=0:647d4000 (2fff)
  get Phys(data[n=4+3000]=f71c5000)
AtapiVirtToPhysAddr_: f71c5000 -> 00000000:647d7000
  ph data[3]=0:647d4000 (3fff)
  get Phys(data[n=4+4000]=f71c6000)
AtapiVirtToPhysAddr_: f71c6000 -> 00000000:647d8000
  ph data[3]=0:647d4000 (4fff)
  get Phys(data[n=4+5000]=f71c7000)
AtapiVirtToPhysAddr_: f71c7000 -> 00000000:647d9000
  set TERM
  ph data[3]=0:647d4000 (5fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000d80, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000e00, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x4, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000e80, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000e80, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7188000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7188000)
AtapiVirtToPhysAddr_: f7188000 -> 00000000:645c2000
  ph data[0]=0:645c2000 (fff)
  get Phys(data[n=1+1000]=f7189000)
AtapiVirtToPhysAddr_: f7189000 -> 00000000:645c3000
  ph data[0]=0:645c2000 (1fff)
  get Phys(data[n=1+2000]=f718a000)
AtapiVirtToPhysAddr_: f718a000 -> 00000000:645c4000
  ph data[0]=0:645c2000 (2fff)
  get Phys(data[n=1+3000]=f718b000)
AtapiVirtToPhysAddr_: f718b000 -> 00000000:645c5000
  ph data[0]=0:645c2000 (3fff)
  get Phys(data[n=1+4000]=f718c000)
AtapiVirtToPhysAddr_: f718c000 -> 00000000:645c6000
  ph data[0]=0:645c2000 (4fff)
  get Phys(data[n=1+5000]=f718d000)
AtapiVirtToPhysAddr_: f718d000 -> 00000000:645c7000
  ph data[0]=0:645c2000 (5fff)
  get Phys(data[n=1+6000]=f718e000)
AtapiVirtToPhysAddr_: f718e000 -> 00000000:645c8000
  ph data[0]=0:645c2000 (6fff)
  get Phys(data[n=1+7000]=f718f000)
AtapiVirtToPhysAddr_: f718f000 -> 00000000:645c1000
  ph data[1]=0:645c1000 (fff)
  get Phys(data[n=2+1000]=f7190000)
AtapiVirtToPhysAddr_: f7190000 -> 00000000:645ca000
  ph data[2]=0:645ca000 (fff)
  get Phys(data[n=3+1000]=f7191000)
AtapiVirtToPhysAddr_: f7191000 -> 00000000:645cb000
  ph data[2]=0:645ca000 (1fff)
  get Phys(data[n=3+2000]=f7192000)
AtapiVirtToPhysAddr_: f7192000 -> 00000000:645cc000
  ph data[2]=0:645ca000 (2fff)
  get Phys(data[n=3+3000]=f7193000)
AtapiVirtToPhysAddr_: f7193000 -> 00000000:645cd000
  ph data[2]=0:645ca000 (3fff)
  get Phys(data[n=3+4000]=f7194000)
AtapiVirtToPhysAddr_: f7194000 -> 00000000:645ce000
  ph data[2]=0:645ca000 (4fff)
  get Phys(data[n=3+5000]=f7195000)
AtapiVirtToPhysAddr_: f7195000 -> 00000000:645cf000
  ph data[2]=0:645ca000 (5fff)
  get Phys(data[n=3+6000]=f7196000)
AtapiVirtToPhysAddr_: f7196000 -> 00000000:645d0000
  ph data[2]=0:645ca000 (6fff)
  get Phys(data[n=3+7000]=f7197000)
AtapiVirtToPhysAddr_: f7197000 -> 00000000:645c9000
  set TERM
  ph data[3]=0:645c9000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000e80, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x4, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000f00, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000f00, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7198000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7198000)
AtapiVirtToPhysAddr_: f7198000 -> 00000000:645d2000
  ph data[0]=0:645d2000 (fff)
  get Phys(data[n=1+1000]=f7199000)
AtapiVirtToPhysAddr_: f7199000 -> 00000000:645d3000
  ph data[0]=0:645d2000 (1fff)
  get Phys(data[n=1+2000]=f719a000)
AtapiVirtToPhysAddr_: f719a000 -> 00000000:645d4000
  ph data[0]=0:645d2000 (2fff)
  get Phys(data[n=1+3000]=f719b000)
AtapiVirtToPhysAddr_: f719b000 -> 00000000:645d5000
  ph data[0]=0:645d2000 (3fff)
  get Phys(data[n=1+4000]=f719c000)
AtapiVirtToPhysAddr_: f719c000 -> 00000000:645d6000
  ph data[0]=0:645d2000 (4fff)
  get Phys(data[n=1+5000]=f719d000)
AtapiVirtToPhysAddr_: f719d000 -> 00000000:645d7000
  ph data[0]=0:645d2000 (5fff)
  get Phys(data[n=1+6000]=f719e000)
AtapiVirtToPhysAddr_: f719e000 -> 00000000:645d8000
  ph data[0]=0:645d2000 (6fff)
  get Phys(data[n=1+7000]=f719f000)
AtapiVirtToPhysAddr_: f719f000 -> 00000000:645d1000
  ph data[1]=0:645d1000 (fff)
  get Phys(data[n=2+1000]=f71a0000)
AtapiVirtToPhysAddr_: f71a0000 -> 00000000:645da000
  ph data[2]=0:645da000 (fff)
  get Phys(data[n=3+1000]=f71a1000)
AtapiVirtToPhysAddr_: f71a1000 -> 00000000:645db000
  ph data[2]=0:645da000 (1fff)
  get Phys(data[n=3+2000]=f71a2000)
AtapiVirtToPhysAddr_: f71a2000 -> 00000000:645dc000
  ph data[2]=0:645da000 (2fff)
  get Phys(data[n=3+3000]=f71a3000)
AtapiVirtToPhysAddr_: f71a3000 -> 00000000:645dd000
  ph data[2]=0:645da000 (3fff)
  get Phys(data[n=3+4000]=f71a4000)
AtapiVirtToPhysAddr_: f71a4000 -> 00000000:645de000
  ph data[2]=0:645da000 (4fff)
  get Phys(data[n=3+5000]=f71a5000)
AtapiVirtToPhysAddr_: f71a5000 -> 00000000:645df000
  ph data[2]=0:645da000 (5fff)
  get Phys(data[n=3+6000]=f71a6000)
AtapiVirtToPhysAddr_: f71a6000 -> 00000000:645e0000
  ph data[2]=0:645da000 (6fff)
  get Phys(data[n=3+7000]=f71a7000)
AtapiVirtToPhysAddr_: f71a7000 -> 00000000:645d9000
  set TERM
  ph data[3]=0:645d9000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520e9c
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000f00, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000f80, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000f80, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f71a8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f71a8000)
AtapiVirtToPhysAddr_: f71a8000 -> 00000000:645e2000
  ph data[0]=0:645e2000 (fff)
  get Phys(data[n=1+1000]=f71a9000)
AtapiVirtToPhysAddr_: f71a9000 -> 00000000:645e3000
  ph data[0]=0:645e2000 (1fff)
  get Phys(data[n=1+2000]=f71aa000)
AtapiVirtToPhysAddr_: f71aa000 -> 00000000:645e4000
  ph data[0]=0:645e2000 (2fff)
  get Phys(data[n=1+3000]=f71ab000)
AtapiVirtToPhysAddr_: f71ab000 -> 00000000:645e5000
  ph data[0]=0:645e2000 (3fff)
  get Phys(data[n=1+4000]=f71ac000)
AtapiVirtToPhysAddr_: f71ac000 -> 00000000:645e6000
  ph data[0]=0:645e2000 (4fff)
  get Phys(data[n=1+5000]=f71ad000)
AtapiVirtToPhysAddr_: f71ad000 -> 00000000:645e7000
  ph data[0]=0:645e2000 (5fff)
  get Phys(data[n=1+6000]=f71ae000)
AtapiVirtToPhysAddr_: f71ae000 -> 00000000:645e8000
  ph data[0]=0:645e2000 (6fff)
  get Phys(data[n=1+7000]=f71af000)
AtapiVirtToPhysAddr_: f71af000 -> 00000000:645e1000
  ph data[1]=0:645e1000 (fff)
  get Phys(data[n=2+1000]=f71b0000)
AtapiVirtToPhysAddr_: f71b0000 -> 00000000:645ea000
  ph data[2]=0:645ea000 (fff)
  get Phys(data[n=3+1000]=f71b1000)
AtapiVirtToPhysAddr_: f71b1000 -> 00000000:645eb000
  ph data[2]=0:645ea000 (1fff)
  get Phys(data[n=3+2000]=f71b2000)
AtapiVirtToPhysAddr_: f71b2000 -> 00000000:645ec000
  ph data[2]=0:645ea000 (2fff)
  get Phys(data[n=3+3000]=f71b3000)
AtapiVirtToPhysAddr_: f71b3000 -> 00000000:645ed000
  ph data[2]=0:645ea000 (3fff)
  get Phys(data[n=3+4000]=f71b4000)
AtapiVirtToPhysAddr_: f71b4000 -> 00000000:645ee000
  ph data[2]=0:645ea000 (4fff)
  get Phys(data[n=3+5000]=f71b5000)
AtapiVirtToPhysAddr_: f71b5000 -> 00000000:645ef000
  ph data[2]=0:645ea000 (5fff)
  get Phys(data[n=3+6000]=f71b6000)
AtapiVirtToPhysAddr_: f71b6000 -> 00000000:645f0000
  ph data[2]=0:645ea000 (6fff)
  get Phys(data[n=3+7000]=f71b7000)
AtapiVirtToPhysAddr_: f71b7000 -> 00000000:645e9000
  set TERM
  ph data[3]=0:645e9000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001000, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001000, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f71b8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f71b8000)
AtapiVirtToPhysAddr_: f71b8000 -> 00000000:645f2000
  ph data[0]=0:645f2000 (fff)
  get Phys(data[n=1+1000]=f71b9000)
AtapiVirtToPhysAddr_: f71b9000 -> 00000000:645f3000
  ph data[0]=0:645f2000 (1fff)
  get Phys(data[n=1+2000]=f71ba000)
AtapiVirtToPhysAddr_: f71ba000 -> 00000000:645f4000
  ph data[0]=0:645f2000 (2fff)
  get Phys(data[n=1+3000]=f71bb000)
AtapiVirtToPhysAddr_: f71bb000 -> 00000000:645f5000
  ph data[0]=0:645f2000 (3fff)
  get Phys(data[n=1+4000]=f71bc000)
AtapiVirtToPhysAddr_: f71bc000 -> 00000000:645f6000
  ph data[0]=0:645f2000 (4fff)
  get Phys(data[n=1+5000]=f71bd000)
AtapiVirtToPhysAddr_: f71bd000 -> 00000000:645f7000
  ph data[0]=0:645f2000 (5fff)
  get Phys(data[n=1+6000]=f71be000)
AtapiVirtToPhysAddr_: f71be000 -> 00000000:645f8000
  ph data[0]=0:645f2000 (6fff)
  get Phys(data[n=1+7000]=f71bf000)
AtapiVirtToPhysAddr_: f71bf000 -> 00000000:645f1000
  ph data[1]=0:645f1000 (fff)
  get Phys(data[n=2+1000]=f71c0000)
AtapiVirtToPhysAddr_: f71c0000 -> 00000000:645fa000
  ph data[2]=0:645fa000 (fff)
  get Phys(data[n=3+1000]=f71c1000)
AtapiVirtToPhysAddr_: f71c1000 -> 00000000:645fb000
  ph data[2]=0:645fa000 (1fff)
  get Phys(data[n=3+2000]=f71c2000)
AtapiVirtToPhysAddr_: f71c2000 -> 00000000:645fc000
  ph data[2]=0:645fa000 (2fff)
  get Phys(data[n=3+3000]=f71c3000)
AtapiVirtToPhysAddr_: f71c3000 -> 00000000:645fd000
  ph data[2]=0:645fa000 (3fff)
  get Phys(data[n=3+4000]=f71c4000)
AtapiVirtToPhysAddr_: f71c4000 -> 00000000:645fe000
  ph data[2]=0:645fa000 (4fff)
  get Phys(data[n=3+5000]=f71c5000)
AtapiVirtToPhysAddr_: f71c5000 -> 00000000:645ff000
  ph data[2]=0:645fa000 (5fff)
  get Phys(data[n=3+6000]=f71c6000)
AtapiVirtToPhysAddr_: f71c6000 -> 00000000:64600000
  ph data[2]=0:645fa000 (6fff)
  get Phys(data[n=3+7000]=f71c7000)
AtapiVirtToPhysAddr_: f71c7000 -> 00000000:645f9000
  set TERM
  ph data[3]=0:645f9000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000f80, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x4, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001000, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001080, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001080, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7188000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7188000)
AtapiVirtToPhysAddr_: f7188000 -> 00000000:64212000
  ph data[0]=0:64212000 (fff)
  get Phys(data[n=1+1000]=f7189000)
AtapiVirtToPhysAddr_: f7189000 -> 00000000:64213000
  ph data[0]=0:64212000 (1fff)
  get Phys(data[n=1+2000]=f718a000)
AtapiVirtToPhysAddr_: f718a000 -> 00000000:64214000
  ph data[0]=0:64212000 (2fff)
  get Phys(data[n=1+3000]=f718b000)
AtapiVirtToPhysAddr_: f718b000 -> 00000000:64215000
  ph data[0]=0:64212000 (3fff)
  get Phys(data[n=1+4000]=f718c000)
AtapiVirtToPhysAddr_: f718c000 -> 00000000:64216000
  ph data[0]=0:64212000 (4fff)
  get Phys(data[n=1+5000]=f718d000)
AtapiVirtToPhysAddr_: f718d000 -> 00000000:64217000
  ph data[0]=0:64212000 (5fff)
  get Phys(data[n=1+6000]=f718e000)
AtapiVirtToPhysAddr_: f718e000 -> 00000000:64218000
  ph data[0]=0:64212000 (6fff)
  get Phys(data[n=1+7000]=f718f000)
AtapiVirtToPhysAddr_: f718f000 -> 00000000:64219000
  ph data[0]=0:64212000 (7fff)
  get Phys(data[n=1+8000]=f7190000)
AtapiVirtToPhysAddr_: f7190000 -> 00000000:6421a000
  ph data[0]=0:64212000 (8fff)
  get Phys(data[n=1+9000]=f7191000)
AtapiVirtToPhysAddr_: f7191000 -> 00000000:6421b000
  ph data[0]=0:64212000 (9fff)
  get Phys(data[n=1+a000]=f7192000)
AtapiVirtToPhysAddr_: f7192000 -> 00000000:6421c000
  ph data[0]=0:64212000 (afff)
  get Phys(data[n=1+b000]=f7193000)
AtapiVirtToPhysAddr_: f7193000 -> 00000000:6421d000
  ph data[0]=0:64212000 (bfff)
  get Phys(data[n=1+c000]=f7194000)
AtapiVirtToPhysAddr_: f7194000 -> 00000000:6421e000
  ph data[0]=0:64212000 (cfff)
  get Phys(data[n=1+d000]=f7195000)
AtapiVirtToPhysAddr_: f7195000 -> 00000000:6421f000
  ph data[0]=0:64212000 (dfff)
  get Phys(data[n=1+e000]=f7196000)
AtapiVirtToPhysAddr_: f7196000 -> 00000000:64220000
  ph data[0]=0:64212000 (efff)
  get Phys(data[n=1+f000]=f7197000)
AtapiVirtToPhysAddr_: f7197000 -> 00000000:64221000
  set TERM
  ph data[0]=0:64212000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001080, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x1, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001100, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001100, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7198000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7198000)
AtapiVirtToPhysAddr_: f7198000 -> 00000000:64222000
  ph data[0]=0:64222000 (fff)
  get Phys(data[n=1+1000]=f7199000)
AtapiVirtToPhysAddr_: f7199000 -> 00000000:64223000
  ph data[0]=0:64222000 (1fff)
  get Phys(data[n=1+2000]=f719a000)
AtapiVirtToPhysAddr_: f719a000 -> 00000000:64224000
  ph data[0]=0:64222000 (2fff)
  get Phys(data[n=1+3000]=f719b000)
AtapiVirtToPhysAddr_: f719b000 -> 00000000:64225000
  ph data[0]=0:64222000 (3fff)
  get Phys(data[n=1+4000]=f719c000)
AtapiVirtToPhysAddr_: f719c000 -> 00000000:64226000
  ph data[0]=0:64222000 (4fff)
  get Phys(data[n=1+5000]=f719d000)
AtapiVirtToPhysAddr_: f719d000 -> 00000000:64227000
  ph data[0]=0:64222000 (5fff)
  get Phys(data[n=1+6000]=f719e000)
AtapiVirtToPhysAddr_: f719e000 -> 00000000:64228000
  ph data[0]=0:64222000 (6fff)
  get Phys(data[n=1+7000]=f719f000)
AtapiVirtToPhysAddr_: f719f000 -> 00000000:64229000
  ph data[0]=0:64222000 (7fff)
  get Phys(data[n=1+8000]=f71a0000)
AtapiVirtToPhysAddr_: f71a0000 -> 00000000:6422a000
  ph data[0]=0:64222000 (8fff)
  get Phys(data[n=1+9000]=f71a1000)
AtapiVirtToPhysAddr_: f71a1000 -> 00000000:6422b000
  ph data[0]=0:64222000 (9fff)
  get Phys(data[n=1+a000]=f71a2000)
AtapiVirtToPhysAddr_: f71a2000 -> 00000000:6422c000
  ph data[0]=0:64222000 (afff)
  get Phys(data[n=1+b000]=f71a3000)
AtapiVirtToPhysAddr_: f71a3000 -> 00000000:6422d000
  ph data[0]=0:64222000 (bfff)
  get Phys(data[n=1+c000]=f71a4000)
AtapiVirtToPhysAddr_: f71a4000 -> 00000000:6422e000
  ph data[0]=0:64222000 (cfff)
  get Phys(data[n=1+d000]=f71a5000)
AtapiVirtToPhysAddr_: f71a5000 -> 00000000:6422f000
  ph data[0]=0:64222000 (dfff)
  get Phys(data[n=1+e000]=f71a6000)
AtapiVirtToPhysAddr_: f71a6000 -> 00000000:64230000
  ph data[0]=0:64222000 (efff)
  get Phys(data[n=1+f000]=f71a7000)
AtapiVirtToPhysAddr_: f71a7000 -> 00000000:64231000
  set TERM
  ph data[0]=0:64222000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001180, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001180, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f71a8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f71a8000)
AtapiVirtToPhysAddr_: f71a8000 -> 00000000:64232000
  ph data[0]=0:64232000 (fff)
  get Phys(data[n=1+1000]=f71a9000)
AtapiVirtToPhysAddr_: f71a9000 -> 00000000:64233000
  ph data[0]=0:64232000 (1fff)
  get Phys(data[n=1+2000]=f71aa000)
AtapiVirtToPhysAddr_: f71aa000 -> 00000000:64234000
  ph data[0]=0:64232000 (2fff)
  get Phys(data[n=1+3000]=f71ab000)
AtapiVirtToPhysAddr_: f71ab000 -> 00000000:64235000
  ph data[0]=0:64232000 (3fff)
  get Phys(data[n=1+4000]=f71ac000)
AtapiVirtToPhysAddr_: f71ac000 -> 00000000:64236000
  ph data[0]=0:64232000 (4fff)
  get Phys(data[n=1+5000]=f71ad000)
AtapiVirtToPhysAddr_: f71ad000 -> 00000000:64237000
  ph data[0]=0:64232000 (5fff)
  get Phys(data[n=1+6000]=f71ae000)
AtapiVirtToPhysAddr_: f71ae000 -> 00000000:64238000
  ph data[0]=0:64232000 (6fff)
  get Phys(data[n=1+7000]=f71af000)
AtapiVirtToPhysAddr_: f71af000 -> 00000000:64239000
  ph data[0]=0:64232000 (7fff)
  get Phys(data[n=1+8000]=f71b0000)
AtapiVirtToPhysAddr_: f71b0000 -> 00000000:6423a000
  ph data[0]=0:64232000 (8fff)
  get Phys(data[n=1+9000]=f71b1000)
AtapiVirtToPhysAddr_: f71b1000 -> 00000000:6423b000
  ph data[0]=0:64232000 (9fff)
  get Phys(data[n=1+a000]=f71b2000)
AtapiVirtToPhysAddr_: f71b2000 -> 00000000:6423c000
  ph data[0]=0:64232000 (afff)
  get Phys(data[n=1+b000]=f71b3000)
AtapiVirtToPhysAddr_: f71b3000 -> 00000000:6423d000
  ph data[0]=0:64232000 (bfff)
  get Phys(data[n=1+c000]=f71b4000)
AtapiVirtToPhysAddr_: f71b4000 -> 00000000:6423e000
  ph data[0]=0:64232000 (cfff)
  get Phys(data[n=1+d000]=f71b5000)
AtapiVirtToPhysAddr_: f71b5000 -> 00000000:6423f000
  ph data[0]=0:64232000 (dfff)
  get Phys(data[n=1+e000]=f71b6000)
AtapiVirtToPhysAddr_: f71b6000 -> 00000000:64240000
  ph data[0]=0:64232000 (efff)
  get Phys(data[n=1+f000]=f71b7000)
AtapiVirtToPhysAddr_: f71b7000 -> 00000000:64241000
  set TERM
  ph data[0]=0:64232000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ea0
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001100, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001200, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001200, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f71b8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f71b8000)
AtapiVirtToPhysAddr_: f71b8000 -> 00000000:64242000
  ph data[0]=0:64242000 (fff)
  get Phys(data[n=1+1000]=f71b9000)
AtapiVirtToPhysAddr_: f71b9000 -> 00000000:64243000
  ph data[0]=0:64242000 (1fff)
  get Phys(data[n=1+2000]=f71ba000)
AtapiVirtToPhysAddr_: f71ba000 -> 00000000:64244000
  ph data[0]=0:64242000 (2fff)
  get Phys(data[n=1+3000]=f71bb000)
AtapiVirtToPhysAddr_: f71bb000 -> 00000000:64245000
  ph data[0]=0:64242000 (3fff)
  get Phys(data[n=1+4000]=f71bc000)
AtapiVirtToPhysAddr_: f71bc000 -> 00000000:64246000
  ph data[0]=0:64242000 (4fff)
  get Phys(data[n=1+5000]=f71bd000)
AtapiVirtToPhysAddr_: f71bd000 -> 00000000:64247000
  ph data[0]=0:64242000 (5fff)
  get Phys(data[n=1+6000]=f71be000)
AtapiVirtToPhysAddr_: f71be000 -> 00000000:64248000
  ph data[0]=0:64242000 (6fff)
  get Phys(data[n=1+7000]=f71bf000)
AtapiVirtToPhysAddr_: f71bf000 -> 00000000:64249000
  ph data[0]=0:64242000 (7fff)
  get Phys(data[n=1+8000]=f71c0000)
AtapiVirtToPhysAddr_: f71c0000 -> 00000000:6424a000
  ph data[0]=0:64242000 (8fff)
  get Phys(data[n=1+9000]=f71c1000)
AtapiVirtToPhysAddr_: f71c1000 -> 00000000:6424b000
  ph data[0]=0:64242000 (9fff)
  get Phys(data[n=1+a000]=f71c2000)
AtapiVirtToPhysAddr_: f71c2000 -> 00000000:6424c000
  ph data[0]=0:64242000 (afff)
  get Phys(data[n=1+b000]=f71c3000)
AtapiVirtToPhysAddr_: f71c3000 -> 00000000:6424d000
  ph data[0]=0:64242000 (bfff)
  get Phys(data[n=1+c000]=f71c4000)
AtapiVirtToPhysAddr_: f71c4000 -> 00000000:6424e000
  ph data[0]=0:64242000 (cfff)
  get Phys(data[n=1+d000]=f71c5000)
AtapiVirtToPhysAddr_: f71c5000 -> 00000000:6424f000
  ph data[0]=0:64242000 (dfff)
  get Phys(data[n=1+e000]=f71c6000)
AtapiVirtToPhysAddr_: f71c6000 -> 00000000:64250000
  ph data[0]=0:64242000 (efff)
  get Phys(data[n=1+f000]=f71c7000)
AtapiVirtToPhysAddr_: f71c7000 -> 00000000:64251000
  set TERM
  ph data[0]=0:64242000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001180, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001200, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x1, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001280, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001280, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7188000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7188000)
AtapiVirtToPhysAddr_: f7188000 -> 00000000:6403c000
  ph data[0]=0:6403c000 (fff)
  get Phys(data[n=1+1000]=f7189000)
AtapiVirtToPhysAddr_: f7189000 -> 00000000:6403d000
  ph data[0]=0:6403c000 (1fff)
  get Phys(data[n=1+2000]=f718a000)
AtapiVirtToPhysAddr_: f718a000 -> 00000000:6403e000
  ph data[0]=0:6403c000 (2fff)
  get Phys(data[n=1+3000]=f718b000)
AtapiVirtToPhysAddr_: f718b000 -> 00000000:6403f000
  ph data[0]=0:6403c000 (3fff)
  get Phys(data[n=1+4000]=f718c000)
AtapiVirtToPhysAddr_: f718c000 -> 00000000:64040000
  ph data[0]=0:6403c000 (4fff)
  get Phys(data[n=1+5000]=f718d000)
AtapiVirtToPhysAddr_: f718d000 -> 00000000:64039000
  ph data[1]=0:64039000 (fff)
  get Phys(data[n=2+1000]=f718e000)
AtapiVirtToPhysAddr_: f718e000 -> 00000000:64042000
  ph data[2]=0:64042000 (fff)
  get Phys(data[n=3+1000]=f718f000)
AtapiVirtToPhysAddr_: f718f000 -> 00000000:64043000
  ph data[2]=0:64042000 (1fff)
  get Phys(data[n=3+2000]=f7190000)
AtapiVirtToPhysAddr_: f7190000 -> 00000000:64044000
  ph data[2]=0:64042000 (2fff)
  get Phys(data[n=3+3000]=f7191000)
AtapiVirtToPhysAddr_: f7191000 -> 00000000:64045000
  ph data[2]=0:64042000 (3fff)
  get Phys(data[n=3+4000]=f7192000)
AtapiVirtToPhysAddr_: f7192000 -> 00000000:64046000
  ph data[2]=0:64042000 (4fff)
  get Phys(data[n=3+5000]=f7193000)
AtapiVirtToPhysAddr_: f7193000 -> 00000000:64047000
  ph data[2]=0:64042000 (5fff)
  get Phys(data[n=3+6000]=f7194000)
AtapiVirtToPhysAddr_: f7194000 -> 00000000:64048000
  ph data[2]=0:64042000 (6fff)
  get Phys(data[n=3+7000]=f7195000)
AtapiVirtToPhysAddr_: f7195000 -> 00000000:64041000
  ph data[3]=0:64041000 (fff)
  get Phys(data[n=4+1000]=f7196000)
AtapiVirtToPhysAddr_: f7196000 -> 00000000:6404a000
  ph data[4]=0:6404a000 (fff)
  get Phys(data[n=5+1000]=f7197000)
AtapiVirtToPhysAddr_: f7197000 -> 00000000:6404b000
  set TERM
  ph data[4]=0:6404a000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001280, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x5, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001300, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001300, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7198000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7198000)
AtapiVirtToPhysAddr_: f7198000 -> 00000000:6404c000
  ph data[0]=0:6404c000 (fff)
  get Phys(data[n=1+1000]=f7199000)
AtapiVirtToPhysAddr_: f7199000 -> 00000000:6404d000
  ph data[0]=0:6404c000 (1fff)
  get Phys(data[n=1+2000]=f719a000)
AtapiVirtToPhysAddr_: f719a000 -> 00000000:6404e000
  ph data[0]=0:6404c000 (2fff)
  get Phys(data[n=1+3000]=f719b000)
AtapiVirtToPhysAddr_: f719b000 -> 00000000:6404f000
  ph data[0]=0:6404c000 (3fff)
  get Phys(data[n=1+4000]=f719c000)
AtapiVirtToPhysAddr_: f719c000 -> 00000000:64050000
  ph data[0]=0:6404c000 (4fff)
  get Phys(data[n=1+5000]=f719d000)
AtapiVirtToPhysAddr_: f719d000 -> 00000000:64049000
  ph data[1]=0:64049000 (fff)
  get Phys(data[n=2+1000]=f719e000)
AtapiVirtToPhysAddr_: f719e000 -> 00000000:64052000
  ph data[2]=0:64052000 (fff)
  get Phys(data[n=3+1000]=f719f000)
AtapiVirtToPhysAddr_: f719f000 -> 00000000:64053000
  ph data[2]=0:64052000 (1fff)
  get Phys(data[n=3+2000]=f71a0000)
AtapiVirtToPhysAddr_: f71a0000 -> 00000000:64054000
  ph data[2]=0:64052000 (2fff)
  get Phys(data[n=3+3000]=f71a1000)
AtapiVirtToPhysAddr_: f71a1000 -> 00000000:64055000
  ph data[2]=0:64052000 (3fff)
  get Phys(data[n=3+4000]=f71a2000)
AtapiVirtToPhysAddr_: f71a2000 -> 00000000:64056000
  ph data[2]=0:64052000 (4fff)
  get Phys(data[n=3+5000]=f71a3000)
AtapiVirtToPhysAddr_: f71a3000 -> 00000000:64057000
  ph data[2]=0:64052000 (5fff)
  get Phys(data[n=3+6000]=f71a4000)
AtapiVirtToPhysAddr_: f71a4000 -> 00000000:64058000
  ph data[2]=0:64052000 (6fff)
  get Phys(data[n=3+7000]=f71a5000)
AtapiVirtToPhysAddr_: f71a5000 -> 00000000:64051000
  ph data[3]=0:64051000 (fff)
  get Phys(data[n=4+1000]=f71a6000)
AtapiVirtToPhysAddr_: f71a6000 -> 00000000:6405a000
  ph data[4]=0:6405a000 (fff)
  get Phys(data[n=5+1000]=f71a7000)
AtapiVirtToPhysAddr_: f71a7000 -> 00000000:6405b000
  set TERM
  ph data[4]=0:6405a000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001380, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001380, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f71a8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f71a8000)
AtapiVirtToPhysAddr_: f71a8000 -> 00000000:6405c000
  ph data[0]=0:6405c000 (fff)
  get Phys(data[n=1+1000]=f71a9000)
AtapiVirtToPhysAddr_: f71a9000 -> 00000000:6405d000
  ph data[0]=0:6405c000 (1fff)
  get Phys(data[n=1+2000]=f71aa000)
AtapiVirtToPhysAddr_: f71aa000 -> 00000000:6405e000
  ph data[0]=0:6405c000 (2fff)
  get Phys(data[n=1+3000]=f71ab000)
AtapiVirtToPhysAddr_: f71ab000 -> 00000000:6405f000
  ph data[0]=0:6405c000 (3fff)
  get Phys(data[n=1+4000]=f71ac000)
AtapiVirtToPhysAddr_: f71ac000 -> 00000000:64060000
  ph data[0]=0:6405c000 (4fff)
  get Phys(data[n=1+5000]=f71ad000)
AtapiVirtToPhysAddr_: f71ad000 -> 00000000:64059000
  ph data[1]=0:64059000 (fff)
  get Phys(data[n=2+1000]=f71ae000)
AtapiVirtToPhysAddr_: f71ae000 -> 00000000:64062000
  ph data[2]=0:64062000 (fff)
  get Phys(data[n=3+1000]=f71af000)
AtapiVirtToPhysAddr_: f71af000 -> 00000000:64063000
  ph data[2]=0:64062000 (1fff)
  get Phys(data[n=3+2000]=f71b0000)
AtapiVirtToPhysAddr_: f71b0000 -> 00000000:64064000
  ph data[2]=0:64062000 (2fff)
  get Phys(data[n=3+3000]=f71b1000)
AtapiVirtToPhysAddr_: f71b1000 -> 00000000:64065000
  ph data[2]=0:64062000 (3fff)
  get Phys(data[n=3+4000]=f71b2000)
AtapiVirtToPhysAddr_: f71b2000 -> 00000000:64066000
  ph data[2]=0:64062000 (4fff)
  get Phys(data[n=3+5000]=f71b3000)
AtapiVirtToPhysAddr_: f71b3000 -> 00000000:64067000
  ph data[2]=0:64062000 (5fff)
  get Phys(data[n=3+6000]=f71b4000)
AtapiVirtToPhysAddr_: f71b4000 -> 00000000:64068000
  ph data[2]=0:64062000 (6fff)
  get Phys(data[n=3+7000]=f71b5000)
AtapiVirtToPhysAddr_: f71b5000 -> 00000000:64061000
  ph data[3]=0:64061000 (fff)
  get Phys(data[n=4+1000]=f71b6000)
AtapiVirtToPhysAddr_: f71b6000 -> 00000000:6406a000
  ph data[4]=0:6406a000 (fff)
  get Phys(data[n=5+1000]=f71b7000)
AtapiVirtToPhysAddr_: f71b7000 -> 00000000:6406b000
  set TERM
  ph data[4]=0:6406a000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520e9c
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001300, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x5, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001400, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001400, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f71b8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f71b8000)
AtapiVirtToPhysAddr_: f71b8000 -> 00000000:6406c000
  ph data[0]=0:6406c000 (fff)
  get Phys(data[n=1+1000]=f71b9000)
AtapiVirtToPhysAddr_: f71b9000 -> 00000000:6406d000
  ph data[0]=0:6406c000 (1fff)
  get Phys(data[n=1+2000]=f71ba000)
AtapiVirtToPhysAddr_: f71ba000 -> 00000000:6406e000
  ph data[0]=0:6406c000 (2fff)
  get Phys(data[n=1+3000]=f71bb000)
AtapiVirtToPhysAddr_: f71bb000 -> 00000000:6406f000
  ph data[0]=0:6406c000 (3fff)
  get Phys(data[n=1+4000]=f71bc000)
AtapiVirtToPhysAddr_: f71bc000 -> 00000000:64070000
  ph data[0]=0:6406c000 (4fff)
  get Phys(data[n=1+5000]=f71bd000)
AtapiVirtToPhysAddr_: f71bd000 -> 00000000:64069000
  ph data[1]=0:64069000 (fff)
  get Phys(data[n=2+1000]=f71be000)
AtapiVirtToPhysAddr_: f71be000 -> 00000000:64072000
  ph data[2]=0:64072000 (fff)
  get Phys(data[n=3+1000]=f71bf000)
AtapiVirtToPhysAddr_: f71bf000 -> 00000000:64073000
  ph data[2]=0:64072000 (1fff)
  get Phys(data[n=3+2000]=f71c0000)
AtapiVirtToPhysAddr_: f71c0000 -> 00000000:64074000
  ph data[2]=0:64072000 (2fff)
  get Phys(data[n=3+3000]=f71c1000)
AtapiVirtToPhysAddr_: f71c1000 -> 00000000:64075000
  ph data[2]=0:64072000 (3fff)
  get Phys(data[n=3+4000]=f71c2000)
AtapiVirtToPhysAddr_: f71c2000 -> 00000000:64076000
  ph data[2]=0:64072000 (4fff)
  get Phys(data[n=3+5000]=f71c3000)
AtapiVirtToPhysAddr_: f71c3000 -> 00000000:64077000
  ph data[2]=0:64072000 (5fff)
  get Phys(data[n=3+6000]=f71c4000)
AtapiVirtToPhysAddr_: f71c4000 -> 00000000:64078000
  ph data[2]=0:64072000 (6fff)
  get Phys(data[n=3+7000]=f71c5000)
AtapiVirtToPhysAddr_: f71c5000 -> 00000000:64071000
  ph data[3]=0:64071000 (fff)
  get Phys(data[n=4+1000]=f71c6000)
AtapiVirtToPhysAddr_: f71c6000 -> 00000000:6407a000
  ph data[4]=0:6407a000 (fff)
  get Phys(data[n=5+1000]=f71c7000)
AtapiVirtToPhysAddr_: f71c7000 -> 00000000:6407b000
  set TERM
  ph data[4]=0:6407a000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520f18
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001380, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x5, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001400, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x5, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001480, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001480, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7188000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7188000)
AtapiVirtToPhysAddr_: f7188000 -> 00000000:63cac000
  ph data[0]=0:63cac000 (fff)
  get Phys(data[n=1+1000]=f7189000)
AtapiVirtToPhysAddr_: f7189000 -> 00000000:63cad000
  ph data[0]=0:63cac000 (1fff)
  get Phys(data[n=1+2000]=f718a000)
AtapiVirtToPhysAddr_: f718a000 -> 00000000:63cae000
  ph data[0]=0:63cac000 (2fff)
  get Phys(data[n=1+3000]=f718b000)
AtapiVirtToPhysAddr_: f718b000 -> 00000000:63caf000
  ph data[0]=0:63cac000 (3fff)
  get Phys(data[n=1+4000]=f718c000)
AtapiVirtToPhysAddr_: f718c000 -> 00000000:63cb0000
  ph data[0]=0:63cac000 (4fff)
  get Phys(data[n=1+5000]=f718d000)
AtapiVirtToPhysAddr_: f718d000 -> 00000000:63ca9000
  ph data[1]=0:63ca9000 (fff)
  get Phys(data[n=2+1000]=f718e000)
AtapiVirtToPhysAddr_: f718e000 -> 00000000:63caa000
  ph data[1]=0:63ca9000 (1fff)
  get Phys(data[n=2+2000]=f718f000)
AtapiVirtToPhysAddr_: f718f000 -> 00000000:63cab000
  ph data[1]=0:63ca9000 (2fff)
  get Phys(data[n=2+3000]=f7190000)
AtapiVirtToPhysAddr_: f7190000 -> 00000000:63cb4000
  ph data[2]=0:63cb4000 (fff)
  get Phys(data[n=3+1000]=f7191000)
AtapiVirtToPhysAddr_: f7191000 -> 00000000:63cb5000
  ph data[2]=0:63cb4000 (1fff)
  get Phys(data[n=3+2000]=f7192000)
AtapiVirtToPhysAddr_: f7192000 -> 00000000:63cb6000
  ph data[2]=0:63cb4000 (2fff)
  get Phys(data[n=3+3000]=f7193000)
AtapiVirtToPhysAddr_: f7193000 -> 00000000:63cb7000
  ph data[2]=0:63cb4000 (3fff)
  get Phys(data[n=3+4000]=f7194000)
AtapiVirtToPhysAddr_: f7194000 -> 00000000:63cb8000
  ph data[2]=0:63cb4000 (4fff)
  get Phys(data[n=3+5000]=f7195000)
AtapiVirtToPhysAddr_: f7195000 -> 00000000:63cb1000
  ph data[3]=0:63cb1000 (fff)
  get Phys(data[n=4+1000]=f7196000)
AtapiVirtToPhysAddr_: f7196000 -> 00000000:63cb2000
  ph data[3]=0:63cb1000 (1fff)
  get Phys(data[n=4+2000]=f7197000)
AtapiVirtToPhysAddr_: f7197000 -> 00000000:63cb3000
  set TERM
  ph data[3]=0:63cb1000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001480, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001500, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001500, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7198000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7198000)
AtapiVirtToPhysAddr_: f7198000 -> 00000000:63cbc000
  ph data[0]=0:63cbc000 (fff)
  get Phys(data[n=1+1000]=f7199000)
AtapiVirtToPhysAddr_: f7199000 -> 00000000:63cbd000
  ph data[0]=0:63cbc000 (1fff)
  get Phys(data[n=1+2000]=f719a000)
AtapiVirtToPhysAddr_: f719a000 -> 00000000:63cbe000
  ph data[0]=0:63cbc000 (2fff)
  get Phys(data[n=1+3000]=f719b000)
AtapiVirtToPhysAddr_: f719b000 -> 00000000:63cbf000
  ph data[0]=0:63cbc000 (3fff)
  get Phys(data[n=1+4000]=f719c000)
AtapiVirtToPhysAddr_: f719c000 -> 00000000:63cc0000
  ph data[0]=0:63cbc000 (4fff)
  get Phys(data[n=1+5000]=f719d000)
AtapiVirtToPhysAddr_: f719d000 -> 00000000:63cb9000
  ph data[1]=0:63cb9000 (fff)
  get Phys(data[n=2+1000]=f719e000)
AtapiVirtToPhysAddr_: f719e000 -> 00000000:63cba000
  ph data[1]=0:63cb9000 (1fff)
  get Phys(data[n=2+2000]=f719f000)
AtapiVirtToPhysAddr_: f719f000 -> 00000000:63cbb000
  ph data[1]=0:63cb9000 (2fff)
  get Phys(data[n=2+3000]=f71a0000)
AtapiVirtToPhysAddr_: f71a0000 -> 00000000:63cc4000
  ph data[2]=0:63cc4000 (fff)
  get Phys(data[n=3+1000]=f71a1000)
AtapiVirtToPhysAddr_: f71a1000 -> 00000000:63cc5000
  ph data[2]=0:63cc4000 (1fff)
  get Phys(data[n=3+2000]=f71a2000)
AtapiVirtToPhysAddr_: f71a2000 -> 00000000:63cc6000
  ph data[2]=0:63cc4000 (2fff)
  get Phys(data[n=3+3000]=f71a3000)
AtapiVirtToPhysAddr_: f71a3000 -> 00000000:63cc7000
  ph data[2]=0:63cc4000 (3fff)
  get Phys(data[n=3+4000]=f71a4000)
AtapiVirtToPhysAddr_: f71a4000 -> 00000000:63cc8000
  ph data[2]=0:63cc4000 (4fff)
  get Phys(data[n=3+5000]=f71a5000)
AtapiVirtToPhysAddr_: f71a5000 -> 00000000:63cc1000
  ph data[3]=0:63cc1000 (fff)
  get Phys(data[n=4+1000]=f71a6000)
AtapiVirtToPhysAddr_: f71a6000 -> 00000000:63cc2000
  ph data[3]=0:63cc1000 (1fff)
  get Phys(data[n=4+2000]=f71a7000)
AtapiVirtToPhysAddr_: f71a7000 -> 00000000:63cc3000
  set TERM
  ph data[3]=0:63cc1000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001580, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001580, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f71a8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f71a8000)
AtapiVirtToPhysAddr_: f71a8000 -> 00000000:63ccc000
  ph data[0]=0:63ccc000 (fff)
  get Phys(data[n=1+1000]=f71a9000)
AtapiVirtToPhysAddr_: f71a9000 -> 00000000:63ccd000
  ph data[0]=0:63ccc000 (1fff)
  get Phys(data[n=1+2000]=f71aa000)
AtapiVirtToPhysAddr_: f71aa000 -> 00000000:63cce000
  ph data[0]=0:63ccc000 (2fff)
  get Phys(data[n=1+3000]=f71ab000)
AtapiVirtToPhysAddr_: f71ab000 -> 00000000:63ccf000
  ph data[0]=0:63ccc000 (3fff)
  get Phys(data[n=1+4000]=f71ac000)
AtapiVirtToPhysAddr_: f71ac000 -> 00000000:63cd0000
  ph data[0]=0:63ccc000 (4fff)
  get Phys(data[n=1+5000]=f71ad000)
AtapiVirtToPhysAddr_: f71ad000 -> 00000000:63cc9000
  ph data[1]=0:63cc9000 (fff)
  get Phys(data[n=2+1000]=f71ae000)
AtapiVirtToPhysAddr_: f71ae000 -> 00000000:63cca000
  ph data[1]=0:63cc9000 (1fff)
  get Phys(data[n=2+2000]=f71af000)
AtapiVirtToPhysAddr_: f71af000 -> 00000000:63ccb000
  ph data[1]=0:63cc9000 (2fff)
  get Phys(data[n=2+3000]=f71b0000)
AtapiVirtToPhysAddr_: f71b0000 -> 00000000:63cd4000
  ph data[2]=0:63cd4000 (fff)
  get Phys(data[n=3+1000]=f71b1000)
AtapiVirtToPhysAddr_: f71b1000 -> 00000000:63cd5000
  ph data[2]=0:63cd4000 (1fff)
  get Phys(data[n=3+2000]=f71b2000)
AtapiVirtToPhysAddr_: f71b2000 -> 00000000:63cd6000
  ph data[2]=0:63cd4000 (2fff)
  get Phys(data[n=3+3000]=f71b3000)
AtapiVirtToPhysAddr_: f71b3000 -> 00000000:63cd7000
  ph data[2]=0:63cd4000 (3fff)
  get Phys(data[n=3+4000]=f71b4000)
AtapiVirtToPhysAddr_: f71b4000 -> 00000000:63cd8000
  ph data[2]=0:63cd4000 (4fff)
  get Phys(data[n=3+5000]=f71b5000)
AtapiVirtToPhysAddr_: f71b5000 -> 00000000:63cd1000
  ph data[3]=0:63cd1000 (fff)
  get Phys(data[n=4+1000]=f71b6000)
AtapiVirtToPhysAddr_: f71b6000 -> 00000000:63cd2000
  ph data[3]=0:63cd1000 (1fff)
  get Phys(data[n=4+2000]=f71b7000)
AtapiVirtToPhysAddr_: f71b7000 -> 00000000:63cd3000
  set TERM
  ph data[3]=0:63cd1000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520f18
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001500, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x4, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001600, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001600, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f71b8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f71b8000)
AtapiVirtToPhysAddr_: f71b8000 -> 00000000:63cdc000
  ph data[0]=0:63cdc000 (fff)
  get Phys(data[n=1+1000]=f71b9000)
AtapiVirtToPhysAddr_: f71b9000 -> 00000000:63cdd000
  ph data[0]=0:63cdc000 (1fff)
  get Phys(data[n=1+2000]=f71ba000)
AtapiVirtToPhysAddr_: f71ba000 -> 00000000:63cde000
  ph data[0]=0:63cdc000 (2fff)
  get Phys(data[n=1+3000]=f71bb000)
AtapiVirtToPhysAddr_: f71bb000 -> 00000000:63cdf000
  ph data[0]=0:63cdc000 (3fff)
  get Phys(data[n=1+4000]=f71bc000)
AtapiVirtToPhysAddr_: f71bc000 -> 00000000:63ce0000
  ph data[0]=0:63cdc000 (4fff)
  get Phys(data[n=1+5000]=f71bd000)
AtapiVirtToPhysAddr_: f71bd000 -> 00000000:63cd9000
  ph data[1]=0:63cd9000 (fff)
  get Phys(data[n=2+1000]=f71be000)
AtapiVirtToPhysAddr_: f71be000 -> 00000000:63cda000
  ph data[1]=0:63cd9000 (1fff)
  get Phys(data[n=2+2000]=f71bf000)
AtapiVirtToPhysAddr_: f71bf000 -> 00000000:63cdb000
  ph data[1]=0:63cd9000 (2fff)
  get Phys(data[n=2+3000]=f71c0000)
AtapiVirtToPhysAddr_: f71c0000 -> 00000000:63ce4000
  ph data[2]=0:63ce4000 (fff)
  get Phys(data[n=3+1000]=f71c1000)
AtapiVirtToPhysAddr_: f71c1000 -> 00000000:63ce5000
  ph data[2]=0:63ce4000 (1fff)
  get Phys(data[n=3+2000]=f71c2000)
AtapiVirtToPhysAddr_: f71c2000 -> 00000000:63ce6000
  ph data[2]=0:63ce4000 (2fff)
  get Phys(data[n=3+3000]=f71c3000)
AtapiVirtToPhysAddr_: f71c3000 -> 00000000:63ce7000
  ph data[2]=0:63ce4000 (3fff)
  get Phys(data[n=3+4000]=f71c4000)
AtapiVirtToPhysAddr_: f71c4000 -> 00000000:63ce8000
  ph data[2]=0:63ce4000 (4fff)
  get Phys(data[n=3+5000]=f71c5000)
AtapiVirtToPhysAddr_: f71c5000 -> 00000000:63ce1000
  ph data[3]=0:63ce1000 (fff)
  get Phys(data[n=4+1000]=f71c6000)
AtapiVirtToPhysAddr_: f71c6000 -> 00000000:63ce2000
  ph data[3]=0:63ce1000 (1fff)
  get Phys(data[n=4+2000]=f71c7000)
AtapiVirtToPhysAddr_: f71c7000 -> 00000000:63ce3000
  set TERM
  ph data[3]=0:63ce1000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001580, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001600, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001680, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001680, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7188000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7188000)
AtapiVirtToPhysAddr_: f7188000 -> 00000000:63ac4000
  ph data[0]=0:63ac4000 (fff)
  get Phys(data[n=1+1000]=f7189000)
AtapiVirtToPhysAddr_: f7189000 -> 00000000:63ac5000
  ph data[0]=0:63ac4000 (1fff)
  get Phys(data[n=1+2000]=f718a000)
AtapiVirtToPhysAddr_: f718a000 -> 00000000:63ac6000
  ph data[0]=0:63ac4000 (2fff)
  get Phys(data[n=1+3000]=f718b000)
AtapiVirtToPhysAddr_: f718b000 -> 00000000:63ac7000
  ph data[0]=0:63ac4000 (3fff)
  get Phys(data[n=1+4000]=f718c000)
AtapiVirtToPhysAddr_: f718c000 -> 00000000:63ac8000
  ph data[0]=0:63ac4000 (4fff)
  get Phys(data[n=1+5000]=f718d000)
AtapiVirtToPhysAddr_: f718d000 -> 00000000:63ac1000
  ph data[1]=0:63ac1000 (fff)
  get Phys(data[n=2+1000]=f718e000)
AtapiVirtToPhysAddr_: f718e000 -> 00000000:63ac2000
  ph data[1]=0:63ac1000 (1fff)
  get Phys(data[n=2+2000]=f718f000)
AtapiVirtToPhysAddr_: f718f000 -> 00000000:63ac3000
  ph data[1]=0:63ac1000 (2fff)
  get Phys(data[n=2+3000]=f7190000)
AtapiVirtToPhysAddr_: f7190000 -> 00000000:63acc000
  ph data[2]=0:63acc000 (fff)
  get Phys(data[n=3+1000]=f7191000)
AtapiVirtToPhysAddr_: f7191000 -> 00000000:63acd000
  ph data[2]=0:63acc000 (1fff)
  get Phys(data[n=3+2000]=f7192000)
AtapiVirtToPhysAddr_: f7192000 -> 00000000:63ace000
  ph data[2]=0:63acc000 (2fff)
  get Phys(data[n=3+3000]=f7193000)
AtapiVirtToPhysAddr_: f7193000 -> 00000000:63acf000
  ph data[2]=0:63acc000 (3fff)
  get Phys(data[n=3+4000]=f7194000)
AtapiVirtToPhysAddr_: f7194000 -> 00000000:63ad0000
  ph data[2]=0:63acc000 (4fff)
  get Phys(data[n=3+5000]=f7195000)
AtapiVirtToPhysAddr_: f7195000 -> 00000000:63ac9000
  ph data[3]=0:63ac9000 (fff)
  get Phys(data[n=4+1000]=f7196000)
AtapiVirtToPhysAddr_: f7196000 -> 00000000:63aca000
  ph data[3]=0:63ac9000 (1fff)
  get Phys(data[n=4+2000]=f7197000)
AtapiVirtToPhysAddr_: f7197000 -> 00000000:63acb000
  set TERM
  ph data[3]=0:63ac9000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001680, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001700, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001700, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7198000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7198000)
AtapiVirtToPhysAddr_: f7198000 -> 00000000:63ad4000
  ph data[0]=0:63ad4000 (fff)
  get Phys(data[n=1+1000]=f7199000)
AtapiVirtToPhysAddr_: f7199000 -> 00000000:63ad5000
  ph data[0]=0:63ad4000 (1fff)
  get Phys(data[n=1+2000]=f719a000)
AtapiVirtToPhysAddr_: f719a000 -> 00000000:63ad6000
  ph data[0]=0:63ad4000 (2fff)
  get Phys(data[n=1+3000]=f719b000)
AtapiVirtToPhysAddr_: f719b000 -> 00000000:63ad7000
  ph data[0]=0:63ad4000 (3fff)
  get Phys(data[n=1+4000]=f719c000)
AtapiVirtToPhysAddr_: f719c000 -> 00000000:63ad8000
  ph data[0]=0:63ad4000 (4fff)
  get Phys(data[n=1+5000]=f719d000)
AtapiVirtToPhysAddr_: f719d000 -> 00000000:63ad1000
  ph data[1]=0:63ad1000 (fff)
  get Phys(data[n=2+1000]=f719e000)
AtapiVirtToPhysAddr_: f719e000 -> 00000000:63ad2000
  ph data[1]=0:63ad1000 (1fff)
  get Phys(data[n=2+2000]=f719f000)
AtapiVirtToPhysAddr_: f719f000 -> 00000000:63ad3000
  ph data[1]=0:63ad1000 (2fff)
  get Phys(data[n=2+3000]=f71a0000)
AtapiVirtToPhysAddr_: f71a0000 -> 00000000:63adc000
  ph data[2]=0:63adc000 (fff)
  get Phys(data[n=3+1000]=f71a1000)
AtapiVirtToPhysAddr_: f71a1000 -> 00000000:63add000
  ph data[2]=0:63adc000 (1fff)
  get Phys(data[n=3+2000]=f71a2000)
AtapiVirtToPhysAddr_: f71a2000 -> 00000000:63ade000
  ph data[2]=0:63adc000 (2fff)
  get Phys(data[n=3+3000]=f71a3000)
AtapiVirtToPhysAddr_: f71a3000 -> 00000000:63adf000
  ph data[2]=0:63adc000 (3fff)
  get Phys(data[n=3+4000]=f71a4000)
AtapiVirtToPhysAddr_: f71a4000 -> 00000000:63ae0000
  ph data[2]=0:63adc000 (4fff)
  get Phys(data[n=3+5000]=f71a5000)
AtapiVirtToPhysAddr_: f71a5000 -> 00000000:63ad9000
  ph data[3]=0:63ad9000 (fff)
  get Phys(data[n=4+1000]=f71a6000)
AtapiVirtToPhysAddr_: f71a6000 -> 00000000:63ada000
  ph data[3]=0:63ad9000 (1fff)
  get Phys(data[n=4+2000]=f71a7000)
AtapiVirtToPhysAddr_: f71a7000 -> 00000000:63adb000
  set TERM
  ph data[3]=0:63ad9000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001780, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001780, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f71a8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f71a8000)
AtapiVirtToPhysAddr_: f71a8000 -> 00000000:63ae4000
  ph data[0]=0:63ae4000 (fff)
  get Phys(data[n=1+1000]=f71a9000)
AtapiVirtToPhysAddr_: f71a9000 -> 00000000:63ae5000
  ph data[0]=0:63ae4000 (1fff)
  get Phys(data[n=1+2000]=f71aa000)
AtapiVirtToPhysAddr_: f71aa000 -> 00000000:63ae6000
  ph data[0]=0:63ae4000 (2fff)
  get Phys(data[n=1+3000]=f71ab000)
AtapiVirtToPhysAddr_: f71ab000 -> 00000000:63ae7000
  ph data[0]=0:63ae4000 (3fff)
  get Phys(data[n=1+4000]=f71ac000)
AtapiVirtToPhysAddr_: f71ac000 -> 00000000:63ae8000
  ph data[0]=0:63ae4000 (4fff)
  get Phys(data[n=1+5000]=f71ad000)
AtapiVirtToPhysAddr_: f71ad000 -> 00000000:63ae1000
  ph data[1]=0:63ae1000 (fff)
  get Phys(data[n=2+1000]=f71ae000)
AtapiVirtToPhysAddr_: f71ae000 -> 00000000:63ae2000
  ph data[1]=0:63ae1000 (1fff)
  get Phys(data[n=2+2000]=f71af000)
AtapiVirtToPhysAddr_: f71af000 -> 00000000:63ae3000
  ph data[1]=0:63ae1000 (2fff)
  get Phys(data[n=2+3000]=f71b0000)
AtapiVirtToPhysAddr_: f71b0000 -> 00000000:63aec000
  ph data[2]=0:63aec000 (fff)
  get Phys(data[n=3+1000]=f71b1000)
AtapiVirtToPhysAddr_: f71b1000 -> 00000000:63aed000
  ph data[2]=0:63aec000 (1fff)
  get Phys(data[n=3+2000]=f71b2000)
AtapiVirtToPhysAddr_: f71b2000 -> 00000000:63aee000
  ph data[2]=0:63aec000 (2fff)
  get Phys(data[n=3+3000]=f71b3000)
AtapiVirtToPhysAddr_: f71b3000 -> 00000000:63aef000
  ph data[2]=0:63aec000 (3fff)
  get Phys(data[n=3+4000]=f71b4000)
AtapiVirtToPhysAddr_: f71b4000 -> 00000000:63af0000
  ph data[2]=0:63aec000 (4fff)
  get Phys(data[n=3+5000]=f71b5000)
AtapiVirtToPhysAddr_: f71b5000 -> 00000000:63ae9000
  ph data[3]=0:63ae9000 (fff)
  get Phys(data[n=4+1000]=f71b6000)
AtapiVirtToPhysAddr_: f71b6000 -> 00000000:63aea000
  ph data[3]=0:63ae9000 (1fff)
  get Phys(data[n=4+2000]=f71b7000)
AtapiVirtToPhysAddr_: f71b7000 -> 00000000:63aeb000
  set TERM
  ph data[3]=0:63ae9000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ec8
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001700, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001800, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001800, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f71b8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f71b8000)
AtapiVirtToPhysAddr_: f71b8000 -> 00000000:63af4000
  ph data[0]=0:63af4000 (fff)
  get Phys(data[n=1+1000]=f71b9000)
AtapiVirtToPhysAddr_: f71b9000 -> 00000000:63af5000
  ph data[0]=0:63af4000 (1fff)
  get Phys(data[n=1+2000]=f71ba000)
AtapiVirtToPhysAddr_: f71ba000 -> 00000000:63af6000
  ph data[0]=0:63af4000 (2fff)
  get Phys(data[n=1+3000]=f71bb000)
AtapiVirtToPhysAddr_: f71bb000 -> 00000000:63af7000
  ph data[0]=0:63af4000 (3fff)
  get Phys(data[n=1+4000]=f71bc000)
AtapiVirtToPhysAddr_: f71bc000 -> 00000000:63af8000
  ph data[0]=0:63af4000 (4fff)
  get Phys(data[n=1+5000]=f71bd000)
AtapiVirtToPhysAddr_: f71bd000 -> 00000000:63af1000
  ph data[1]=0:63af1000 (fff)
  get Phys(data[n=2+1000]=f71be000)
AtapiVirtToPhysAddr_: f71be000 -> 00000000:63af2000
  ph data[1]=0:63af1000 (1fff)
  get Phys(data[n=2+2000]=f71bf000)
AtapiVirtToPhysAddr_: f71bf000 -> 00000000:63af3000
  ph data[1]=0:63af1000 (2fff)
  get Phys(data[n=2+3000]=f71c0000)
AtapiVirtToPhysAddr_: f71c0000 -> 00000000:63afc000
  ph data[2]=0:63afc000 (fff)
  get Phys(data[n=3+1000]=f71c1000)
AtapiVirtToPhysAddr_: f71c1000 -> 00000000:63afd000
  ph data[2]=0:63afc000 (1fff)
  get Phys(data[n=3+2000]=f71c2000)
AtapiVirtToPhysAddr_: f71c2000 -> 00000000:63afe000
  ph data[2]=0:63afc000 (2fff)
  get Phys(data[n=3+3000]=f71c3000)
AtapiVirtToPhysAddr_: f71c3000 -> 00000000:63aff000
  ph data[2]=0:63afc000 (3fff)
  get Phys(data[n=3+4000]=f71c4000)
AtapiVirtToPhysAddr_: f71c4000 -> 00000000:63b00000
  ph data[2]=0:63afc000 (4fff)
  get Phys(data[n=3+5000]=f71c5000)
AtapiVirtToPhysAddr_: f71c5000 -> 00000000:63af9000
  ph data[3]=0:63af9000 (fff)
  get Phys(data[n=4+1000]=f71c6000)
AtapiVirtToPhysAddr_: f71c6000 -> 00000000:63afa000
  ph data[3]=0:63af9000 (1fff)
  get Phys(data[n=4+2000]=f71c7000)
AtapiVirtToPhysAddr_: f71c7000 -> 00000000:63afb000
  set TERM
  ph data[3]=0:63af9000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520f18
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001780, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x4, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001800, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001880, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001880, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7188000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7188000)
AtapiVirtToPhysAddr_: f7188000 -> 00000000:6371c000
  ph data[0]=0:6371c000 (fff)
  get Phys(data[n=1+1000]=f7189000)
AtapiVirtToPhysAddr_: f7189000 -> 00000000:6371d000
  ph data[0]=0:6371c000 (1fff)
  get Phys(data[n=1+2000]=f718a000)
AtapiVirtToPhysAddr_: f718a000 -> 00000000:6371e000
  ph data[0]=0:6371c000 (2fff)
  get Phys(data[n=1+3000]=f718b000)
AtapiVirtToPhysAddr_: f718b000 -> 00000000:6371f000
  ph data[0]=0:6371c000 (3fff)
  get Phys(data[n=1+4000]=f718c000)
AtapiVirtToPhysAddr_: f718c000 -> 00000000:63720000
  ph data[0]=0:6371c000 (4fff)
  get Phys(data[n=1+5000]=f718d000)
AtapiVirtToPhysAddr_: f718d000 -> 00000000:63721000
  ph data[0]=0:6371c000 (5fff)
  get Phys(data[n=1+6000]=f718e000)
AtapiVirtToPhysAddr_: f718e000 -> 00000000:6371a000
  ph data[1]=0:6371a000 (fff)
  get Phys(data[n=2+1000]=f718f000)
AtapiVirtToPhysAddr_: f718f000 -> 00000000:6371b000
  ph data[1]=0:6371a000 (1fff)
  get Phys(data[n=2+2000]=f7190000)
AtapiVirtToPhysAddr_: f7190000 -> 00000000:63724000
  ph data[2]=0:63724000 (fff)
  get Phys(data[n=3+1000]=f7191000)
AtapiVirtToPhysAddr_: f7191000 -> 00000000:63725000
  ph data[2]=0:63724000 (1fff)
  get Phys(data[n=3+2000]=f7192000)
AtapiVirtToPhysAddr_: f7192000 -> 00000000:63726000
  ph data[2]=0:63724000 (2fff)
  get Phys(data[n=3+3000]=f7193000)
AtapiVirtToPhysAddr_: f7193000 -> 00000000:63727000
  ph data[2]=0:63724000 (3fff)
  get Phys(data[n=3+4000]=f7194000)
AtapiVirtToPhysAddr_: f7194000 -> 00000000:63728000
  ph data[2]=0:63724000 (4fff)
  get Phys(data[n=3+5000]=f7195000)
AtapiVirtToPhysAddr_: f7195000 -> 00000000:63729000
  ph data[2]=0:63724000 (5fff)
  get Phys(data[n=3+6000]=f7196000)
AtapiVirtToPhysAddr_: f7196000 -> 00000000:63722000
  ph data[3]=0:63722000 (fff)
  get Phys(data[n=4+1000]=f7197000)
AtapiVirtToPhysAddr_: f7197000 -> 00000000:63723000
  set TERM
  ph data[3]=0:63722000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001880, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001900, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001900, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7198000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7198000)
AtapiVirtToPhysAddr_: f7198000 -> 00000000:6372c000
  ph data[0]=0:6372c000 (fff)
  get Phys(data[n=1+1000]=f7199000)
AtapiVirtToPhysAddr_: f7199000 -> 00000000:6372d000
  ph data[0]=0:6372c000 (1fff)
  get Phys(data[n=1+2000]=f719a000)
AtapiVirtToPhysAddr_: f719a000 -> 00000000:6372e000
  ph data[0]=0:6372c000 (2fff)
  get Phys(data[n=1+3000]=f719b000)
AtapiVirtToPhysAddr_: f719b000 -> 00000000:6372f000
  ph data[0]=0:6372c000 (3fff)
  get Phys(data[n=1+4000]=f719c000)
AtapiVirtToPhysAddr_: f719c000 -> 00000000:63730000
  ph data[0]=0:6372c000 (4fff)
  get Phys(data[n=1+5000]=f719d000)
AtapiVirtToPhysAddr_: f719d000 -> 00000000:63731000
  ph data[0]=0:6372c000 (5fff)
  get Phys(data[n=1+6000]=f719e000)
AtapiVirtToPhysAddr_: f719e000 -> 00000000:6372a000
  ph data[1]=0:6372a000 (fff)
  get Phys(data[n=2+1000]=f719f000)
AtapiVirtToPhysAddr_: f719f000 -> 00000000:6372b000
  ph data[1]=0:6372a000 (1fff)
  get Phys(data[n=2+2000]=f71a0000)
AtapiVirtToPhysAddr_: f71a0000 -> 00000000:63734000
  ph data[2]=0:63734000 (fff)
  get Phys(data[n=3+1000]=f71a1000)
AtapiVirtToPhysAddr_: f71a1000 -> 00000000:63735000
  ph data[2]=0:63734000 (1fff)
  get Phys(data[n=3+2000]=f71a2000)
AtapiVirtToPhysAddr_: f71a2000 -> 00000000:63736000
  ph data[2]=0:63734000 (2fff)
  get Phys(data[n=3+3000]=f71a3000)
AtapiVirtToPhysAddr_: f71a3000 -> 00000000:63737000
  ph data[2]=0:63734000 (3fff)
  get Phys(data[n=3+4000]=f71a4000)
AtapiVirtToPhysAddr_: f71a4000 -> 00000000:63738000
  ph data[2]=0:63734000 (4fff)
  get Phys(data[n=3+5000]=f71a5000)
AtapiVirtToPhysAddr_: f71a5000 -> 00000000:63739000
  ph data[2]=0:63734000 (5fff)
  get Phys(data[n=3+6000]=f71a6000)
AtapiVirtToPhysAddr_: f71a6000 -> 00000000:63732000
  ph data[3]=0:63732000 (fff)
  get Phys(data[n=4+1000]=f71a7000)
AtapiVirtToPhysAddr_: f71a7000 -> 00000000:63733000
  set TERM
  ph data[3]=0:63732000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ec8
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001900, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x4, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001980, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001980, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f71a8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f71a8000)
AtapiVirtToPhysAddr_: f71a8000 -> 00000000:6373c000
  ph data[0]=0:6373c000 (fff)
  get Phys(data[n=1+1000]=f71a9000)
AtapiVirtToPhysAddr_: f71a9000 -> 00000000:6373d000
  ph data[0]=0:6373c000 (1fff)
  get Phys(data[n=1+2000]=f71aa000)
AtapiVirtToPhysAddr_: f71aa000 -> 00000000:6373e000
  ph data[0]=0:6373c000 (2fff)
  get Phys(data[n=1+3000]=f71ab000)
AtapiVirtToPhysAddr_: f71ab000 -> 00000000:6373f000
  ph data[0]=0:6373c000 (3fff)
  get Phys(data[n=1+4000]=f71ac000)
AtapiVirtToPhysAddr_: f71ac000 -> 00000000:63740000
  ph data[0]=0:6373c000 (4fff)
  get Phys(data[n=1+5000]=f71ad000)
AtapiVirtToPhysAddr_: f71ad000 -> 00000000:63741000
  ph data[0]=0:6373c000 (5fff)
  get Phys(data[n=1+6000]=f71ae000)
AtapiVirtToPhysAddr_: f71ae000 -> 00000000:6373a000
  ph data[1]=0:6373a000 (fff)
  get Phys(data[n=2+1000]=f71af000)
AtapiVirtToPhysAddr_: f71af000 -> 00000000:6373b000
  ph data[1]=0:6373a000 (1fff)
  get Phys(data[n=2+2000]=f71b0000)
AtapiVirtToPhysAddr_: f71b0000 -> 00000000:63744000
  ph data[2]=0:63744000 (fff)
  get Phys(data[n=3+1000]=f71b1000)
AtapiVirtToPhysAddr_: f71b1000 -> 00000000:63745000
  ph data[2]=0:63744000 (1fff)
  get Phys(data[n=3+2000]=f71b2000)
AtapiVirtToPhysAddr_: f71b2000 -> 00000000:63746000
  ph data[2]=0:63744000 (2fff)
  get Phys(data[n=3+3000]=f71b3000)
AtapiVirtToPhysAddr_: f71b3000 -> 00000000:63747000
  ph data[2]=0:63744000 (3fff)
  get Phys(data[n=3+4000]=f71b4000)
AtapiVirtToPhysAddr_: f71b4000 -> 00000000:63748000
  ph data[2]=0:63744000 (4fff)
  get Phys(data[n=3+5000]=f71b5000)
AtapiVirtToPhysAddr_: f71b5000 -> 00000000:63749000
  ph data[2]=0:63744000 (5fff)
  get Phys(data[n=3+6000]=f71b6000)
AtapiVirtToPhysAddr_: f71b6000 -> 00000000:63742000
  ph data[3]=0:63742000 (fff)
  get Phys(data[n=4+1000]=f71b7000)
AtapiVirtToPhysAddr_: f71b7000 -> 00000000:63743000
  set TERM
  ph data[3]=0:63742000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001980, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001a00, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001a00, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f71b8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f71b8000)
AtapiVirtToPhysAddr_: f71b8000 -> 00000000:6374c000
  ph data[0]=0:6374c000 (fff)
  get Phys(data[n=1+1000]=f71b9000)
AtapiVirtToPhysAddr_: f71b9000 -> 00000000:6374d000
  ph data[0]=0:6374c000 (1fff)
  get Phys(data[n=1+2000]=f71ba000)
AtapiVirtToPhysAddr_: f71ba000 -> 00000000:6374e000
  ph data[0]=0:6374c000 (2fff)
  get Phys(data[n=1+3000]=f71bb000)
AtapiVirtToPhysAddr_: f71bb000 -> 00000000:6374f000
  ph data[0]=0:6374c000 (3fff)
  get Phys(data[n=1+4000]=f71bc000)
AtapiVirtToPhysAddr_: f71bc000 -> 00000000:63750000
  ph data[0]=0:6374c000 (4fff)
  get Phys(data[n=1+5000]=f71bd000)
AtapiVirtToPhysAddr_: f71bd000 -> 00000000:63751000
  ph data[0]=0:6374c000 (5fff)
  get Phys(data[n=1+6000]=f71be000)
AtapiVirtToPhysAddr_: f71be000 -> 00000000:6374a000
  ph data[1]=0:6374a000 (fff)
  get Phys(data[n=2+1000]=f71bf000)
AtapiVirtToPhysAddr_: f71bf000 -> 00000000:6374b000
  ph data[1]=0:6374a000 (1fff)
  get Phys(data[n=2+2000]=f71c0000)
AtapiVirtToPhysAddr_: f71c0000 -> 00000000:63754000
  ph data[2]=0:63754000 (fff)
  get Phys(data[n=3+1000]=f71c1000)
AtapiVirtToPhysAddr_: f71c1000 -> 00000000:63755000
  ph data[2]=0:63754000 (1fff)
  get Phys(data[n=3+2000]=f71c2000)
AtapiVirtToPhysAddr_: f71c2000 -> 00000000:63756000
  ph data[2]=0:63754000 (2fff)
  get Phys(data[n=3+3000]=f71c3000)
AtapiVirtToPhysAddr_: f71c3000 -> 00000000:63757000
  ph data[2]=0:63754000 (3fff)
  get Phys(data[n=3+4000]=f71c4000)
AtapiVirtToPhysAddr_: f71c4000 -> 00000000:63758000
  ph data[2]=0:63754000 (4fff)
  get Phys(data[n=3+5000]=f71c5000)
AtapiVirtToPhysAddr_: f71c5000 -> 00000000:63759000
  ph data[2]=0:63754000 (5fff)
  get Phys(data[n=3+6000]=f71c6000)
AtapiVirtToPhysAddr_: f71c6000 -> 00000000:63752000
  ph data[3]=0:63752000 (fff)
  get Phys(data[n=4+1000]=f71c7000)
AtapiVirtToPhysAddr_: f71c7000 -> 00000000:63753000
  set TERM
  ph data[3]=0:63752000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001a00, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x4, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001a80, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001a80, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f718a000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f718a000)
AtapiVirtToPhysAddr_: f718a000 -> 00000000:6354c000
  ph data[0]=0:6354c000 (fff)
  get Phys(data[n=1+1000]=f718b000)
AtapiVirtToPhysAddr_: f718b000 -> 00000000:6354d000
  ph data[0]=0:6354c000 (1fff)
  get Phys(data[n=1+2000]=f718c000)
AtapiVirtToPhysAddr_: f718c000 -> 00000000:6354e000
  ph data[0]=0:6354c000 (2fff)
  get Phys(data[n=1+3000]=f718d000)
AtapiVirtToPhysAddr_: f718d000 -> 00000000:6354f000
  ph data[0]=0:6354c000 (3fff)
  get Phys(data[n=1+4000]=f718e000)
AtapiVirtToPhysAddr_: f718e000 -> 00000000:63550000
  ph data[0]=0:6354c000 (4fff)
  get Phys(data[n=1+5000]=f718f000)
AtapiVirtToPhysAddr_: f718f000 -> 00000000:63549000
  ph data[1]=0:63549000 (fff)
  get Phys(data[n=2+1000]=f7190000)
AtapiVirtToPhysAddr_: f7190000 -> 00000000:6354a000
  ph data[1]=0:63549000 (1fff)
  get Phys(data[n=2+2000]=f7191000)
AtapiVirtToPhysAddr_: f7191000 -> 00000000:6354b000
  ph data[1]=0:63549000 (2fff)
  get Phys(data[n=2+3000]=f7192000)
AtapiVirtToPhysAddr_: f7192000 -> 00000000:63554000
  ph data[2]=0:63554000 (fff)
  get Phys(data[n=3+1000]=f7193000)
AtapiVirtToPhysAddr_: f7193000 -> 00000000:63555000
  ph data[2]=0:63554000 (1fff)
  get Phys(data[n=3+2000]=f7194000)
AtapiVirtToPhysAddr_: f7194000 -> 00000000:63556000
  ph data[2]=0:63554000 (2fff)
  get Phys(data[n=3+3000]=f7195000)
AtapiVirtToPhysAddr_: f7195000 -> 00000000:63557000
  ph data[2]=0:63554000 (3fff)
  get Phys(data[n=3+4000]=f7196000)
AtapiVirtToPhysAddr_: f7196000 -> 00000000:63558000
  ph data[2]=0:63554000 (4fff)
  get Phys(data[n=3+5000]=f7197000)
AtapiVirtToPhysAddr_: f7197000 -> 00000000:63551000
  ph data[3]=0:63551000 (fff)
  get Phys(data[n=4+1000]=f7198000)
AtapiVirtToPhysAddr_: f7198000 -> 00000000:63552000
  ph data[3]=0:63551000 (1fff)
  get Phys(data[n=4+2000]=f7199000)
AtapiVirtToPhysAddr_: f7199000 -> 00000000:63553000
  set TERM
  ph data[3]=0:63551000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001a80, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x4, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001b00, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001b00, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f719a000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f719a000)
AtapiVirtToPhysAddr_: f719a000 -> 00000000:6355c000
  ph data[0]=0:6355c000 (fff)
  get Phys(data[n=1+1000]=f719b000)
AtapiVirtToPhysAddr_: f719b000 -> 00000000:6355d000
  ph data[0]=0:6355c000 (1fff)
  get Phys(data[n=1+2000]=f719c000)
AtapiVirtToPhysAddr_: f719c000 -> 00000000:6355e000
  ph data[0]=0:6355c000 (2fff)
  get Phys(data[n=1+3000]=f719d000)
AtapiVirtToPhysAddr_: f719d000 -> 00000000:6355f000
  ph data[0]=0:6355c000 (3fff)
  get Phys(data[n=1+4000]=f719e000)
AtapiVirtToPhysAddr_: f719e000 -> 00000000:63560000
  ph data[0]=0:6355c000 (4fff)
  get Phys(data[n=1+5000]=f719f000)
AtapiVirtToPhysAddr_: f719f000 -> 00000000:63559000
  ph data[1]=0:63559000 (fff)
  get Phys(data[n=2+1000]=f71a0000)
AtapiVirtToPhysAddr_: f71a0000 -> 00000000:6355a000
  ph data[1]=0:63559000 (1fff)
  get Phys(data[n=2+2000]=f71a1000)
AtapiVirtToPhysAddr_: f71a1000 -> 00000000:6355b000
  ph data[1]=0:63559000 (2fff)
  get Phys(data[n=2+3000]=f71a2000)
AtapiVirtToPhysAddr_: f71a2000 -> 00000000:63564000
  ph data[2]=0:63564000 (fff)
  get Phys(data[n=3+1000]=f71a3000)
AtapiVirtToPhysAddr_: f71a3000 -> 00000000:63565000
  ph data[2]=0:63564000 (1fff)
  get Phys(data[n=3+2000]=f71a4000)
AtapiVirtToPhysAddr_: f71a4000 -> 00000000:63566000
  ph data[2]=0:63564000 (2fff)
  get Phys(data[n=3+3000]=f71a5000)
AtapiVirtToPhysAddr_: f71a5000 -> 00000000:63567000
  ph data[2]=0:63564000 (3fff)
  get Phys(data[n=3+4000]=f71a6000)
AtapiVirtToPhysAddr_: f71a6000 -> 00000000:63568000
  ph data[2]=0:63564000 (4fff)
  get Phys(data[n=3+5000]=f71a7000)
AtapiVirtToPhysAddr_: f71a7000 -> 00000000:63561000
  ph data[3]=0:63561000 (fff)
  get Phys(data[n=4+1000]=f71a8000)
AtapiVirtToPhysAddr_: f71a8000 -> 00000000:63562000
  ph data[3]=0:63561000 (1fff)
  get Phys(data[n=4+2000]=f71a9000)
AtapiVirtToPhysAddr_: f71a9000 -> 00000000:63563000
  set TERM
  ph data[3]=0:63561000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001b80, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001b80, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f71aa000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f71aa000)
AtapiVirtToPhysAddr_: f71aa000 -> 00000000:6356c000
  ph data[0]=0:6356c000 (fff)
  get Phys(data[n=1+1000]=f71ab000)
AtapiVirtToPhysAddr_: f71ab000 -> 00000000:6356d000
  ph data[0]=0:6356c000 (1fff)
  get Phys(data[n=1+2000]=f71ac000)
AtapiVirtToPhysAddr_: f71ac000 -> 00000000:6356e000
  ph data[0]=0:6356c000 (2fff)
  get Phys(data[n=1+3000]=f71ad000)
AtapiVirtToPhysAddr_: f71ad000 -> 00000000:6356f000
  ph data[0]=0:6356c000 (3fff)
  get Phys(data[n=1+4000]=f71ae000)
AtapiVirtToPhysAddr_: f71ae000 -> 00000000:63570000
  ph data[0]=0:6356c000 (4fff)
  get Phys(data[n=1+5000]=f71af000)
AtapiVirtToPhysAddr_: f71af000 -> 00000000:63569000
  ph data[1]=0:63569000 (fff)
  get Phys(data[n=2+1000]=f71b0000)
AtapiVirtToPhysAddr_: f71b0000 -> 00000000:6356a000
  ph data[1]=0:63569000 (1fff)
  get Phys(data[n=2+2000]=f71b1000)
AtapiVirtToPhysAddr_: f71b1000 -> 00000000:6356b000
  ph data[1]=0:63569000 (2fff)
  get Phys(data[n=2+3000]=f71b2000)
AtapiVirtToPhysAddr_: f71b2000 -> 00000000:63574000
  ph data[2]=0:63574000 (fff)
  get Phys(data[n=3+1000]=f71b3000)
AtapiVirtToPhysAddr_: f71b3000 -> 00000000:63575000
  ph data[2]=0:63574000 (1fff)
  get Phys(data[n=3+2000]=f71b4000)
AtapiVirtToPhysAddr_: f71b4000 -> 00000000:63576000
  ph data[2]=0:63574000 (2fff)
  get Phys(data[n=3+3000]=f71b5000)
AtapiVirtToPhysAddr_: f71b5000 -> 00000000:63577000
  ph data[2]=0:63574000 (3fff)
  get Phys(data[n=3+4000]=f71b6000)
AtapiVirtToPhysAddr_: f71b6000 -> 00000000:63578000
  ph data[2]=0:63574000 (4fff)
  get Phys(data[n=3+5000]=f71b7000)
AtapiVirtToPhysAddr_: f71b7000 -> 00000000:63571000
  ph data[3]=0:63571000 (fff)
  get Phys(data[n=4+1000]=f71b8000)
AtapiVirtToPhysAddr_: f71b8000 -> 00000000:63572000
  ph data[3]=0:63571000 (1fff)
  get Phys(data[n=4+2000]=f71b9000)
AtapiVirtToPhysAddr_: f71b9000 -> 00000000:63573000
  set TERM
  ph data[3]=0:63571000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520f0c
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001b00, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521044
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001c00, OrigWordsRequested 0x7000, DevSize 0x70
IdeReadWrite (REQ): Starting sector is 39001c00, Number of WORDS 0x7000, DevSize 0x70
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f71ba000, count e000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f71ba000)
AtapiVirtToPhysAddr_: f71ba000 -> 00000000:6357c000
  ph data[0]=0:6357c000 (fff)
  get Phys(data[n=1+1000]=f71bb000)
AtapiVirtToPhysAddr_: f71bb000 -> 00000000:6357d000
  ph data[0]=0:6357c000 (1fff)
  get Phys(data[n=1+2000]=f71bc000)
AtapiVirtToPhysAddr_: f71bc000 -> 00000000:6357e000
  ph data[0]=0:6357c000 (2fff)
  get Phys(data[n=1+3000]=f71bd000)
AtapiVirtToPhysAddr_: f71bd000 -> 00000000:6357f000
  ph data[0]=0:6357c000 (3fff)
  get Phys(data[n=1+4000]=f71be000)
AtapiVirtToPhysAddr_: f71be000 -> 00000000:63580000
  ph data[0]=0:6357c000 (4fff)
  get Phys(data[n=1+5000]=f71bf000)
AtapiVirtToPhysAddr_: f71bf000 -> 00000000:63579000
  ph data[1]=0:63579000 (fff)
  get Phys(data[n=2+1000]=f71c0000)
AtapiVirtToPhysAddr_: f71c0000 -> 00000000:6357a000
  ph data[1]=0:63579000 (1fff)
  get Phys(data[n=2+2000]=f71c1000)
AtapiVirtToPhysAddr_: f71c1000 -> 00000000:6357b000
  ph data[1]=0:63579000 (2fff)
  get Phys(data[n=2+3000]=f71c2000)
AtapiVirtToPhysAddr_: f71c2000 -> 00000000:63584000
  ph data[2]=0:63584000 (fff)
  get Phys(data[n=3+1000]=f71c3000)
AtapiVirtToPhysAddr_: f71c3000 -> 00000000:63585000
  ph data[2]=0:63584000 (1fff)
  get Phys(data[n=3+2000]=f71c4000)
AtapiVirtToPhysAddr_: f71c4000 -> 00000000:63586000
  ph data[2]=0:63584000 (2fff)
  get Phys(data[n=3+3000]=f71c5000)
AtapiVirtToPhysAddr_: f71c5000 -> 00000000:63587000
  ph data[2]=0:63584000 (3fff)
  get Phys(data[n=3+4000]=f71c6000)
AtapiVirtToPhysAddr_: f71c6000 -> 00000000:63588000
  ph data[2]=0:63584000 (4fff)
  get Phys(data[n=3+5000]=f71c7000)
AtapiVirtToPhysAddr_: f71c7000 -> 00000000:63581000
  set TERM
  ph data[3]=0:63581000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001b80, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001c00, Count 0x70(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x4, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 7000, WordsLeft 7000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered e000, full size e000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ac8
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffe3d0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffe3d0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7188000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7188000)
AtapiVirtToPhysAddr_: f7188000 -> 00000000:631cc000
  ph data[0]=0:631cc000 (fff)
  get Phys(data[n=1+1000]=f7189000)
AtapiVirtToPhysAddr_: f7189000 -> 00000000:631cd000
  ph data[0]=0:631cc000 (1fff)
  get Phys(data[n=1+2000]=f718a000)
AtapiVirtToPhysAddr_: f718a000 -> 00000000:631ce000
  ph data[0]=0:631cc000 (2fff)
  get Phys(data[n=1+3000]=f718b000)
AtapiVirtToPhysAddr_: f718b000 -> 00000000:631cf000
  ph data[0]=0:631cc000 (3fff)
  get Phys(data[n=1+4000]=f718c000)
AtapiVirtToPhysAddr_: f718c000 -> 00000000:631d0000
  ph data[0]=0:631cc000 (4fff)
  get Phys(data[n=1+5000]=f718d000)
AtapiVirtToPhysAddr_: f718d000 -> 00000000:631d1000
  ph data[0]=0:631cc000 (5fff)
  get Phys(data[n=1+6000]=f718e000)
AtapiVirtToPhysAddr_: f718e000 -> 00000000:631d2000
  ph data[0]=0:631cc000 (6fff)
  get Phys(data[n=1+7000]=f718f000)
AtapiVirtToPhysAddr_: f718f000 -> 00000000:631d3000
  ph data[0]=0:631cc000 (7fff)
  get Phys(data[n=1+8000]=f7190000)
AtapiVirtToPhysAddr_: f7190000 -> 00000000:631d4000
  ph data[0]=0:631cc000 (8fff)
  get Phys(data[n=1+9000]=f7191000)
AtapiVirtToPhysAddr_: f7191000 -> 00000000:631d5000
  ph data[0]=0:631cc000 (9fff)
  get Phys(data[n=1+a000]=f7192000)
AtapiVirtToPhysAddr_: f7192000 -> 00000000:631d6000
  ph data[0]=0:631cc000 (afff)
  get Phys(data[n=1+b000]=f7193000)
AtapiVirtToPhysAddr_: f7193000 -> 00000000:631d7000
  ph data[0]=0:631cc000 (bfff)
  get Phys(data[n=1+c000]=f7194000)
AtapiVirtToPhysAddr_: f7194000 -> 00000000:631d8000
  ph data[0]=0:631cc000 (cfff)
  get Phys(data[n=1+d000]=f7195000)
AtapiVirtToPhysAddr_: f7195000 -> 00000000:631d9000
  ph data[0]=0:631cc000 (dfff)
  get Phys(data[n=1+e000]=f7196000)
AtapiVirtToPhysAddr_: f7196000 -> 00000000:631da000
  ph data[0]=0:631cc000 (efff)
  get Phys(data[n=1+f000]=f7197000)
AtapiVirtToPhysAddr_: f7197000 -> 00000000:631db000
  set TERM
  ph data[0]=0:631cc000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffe3d0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ac8
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffe450, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffe450, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7198000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7198000)
AtapiVirtToPhysAddr_: f7198000 -> 00000000:631dc000
  ph data[0]=0:631dc000 (fff)
  get Phys(data[n=1+1000]=f7199000)
AtapiVirtToPhysAddr_: f7199000 -> 00000000:631dd000
  ph data[0]=0:631dc000 (1fff)
  get Phys(data[n=1+2000]=f719a000)
AtapiVirtToPhysAddr_: f719a000 -> 00000000:631de000
  ph data[0]=0:631dc000 (2fff)
  get Phys(data[n=1+3000]=f719b000)
AtapiVirtToPhysAddr_: f719b000 -> 00000000:631df000
  ph data[0]=0:631dc000 (3fff)
  get Phys(data[n=1+4000]=f719c000)
AtapiVirtToPhysAddr_: f719c000 -> 00000000:631e0000
  ph data[0]=0:631dc000 (4fff)
  get Phys(data[n=1+5000]=f719d000)
AtapiVirtToPhysAddr_: f719d000 -> 00000000:631e1000
  ph data[0]=0:631dc000 (5fff)
  get Phys(data[n=1+6000]=f719e000)
AtapiVirtToPhysAddr_: f719e000 -> 00000000:631e2000
  ph data[0]=0:631dc000 (6fff)
  get Phys(data[n=1+7000]=f719f000)
AtapiVirtToPhysAddr_: f719f000 -> 00000000:631e3000
  ph data[0]=0:631dc000 (7fff)
  get Phys(data[n=1+8000]=f71a0000)
AtapiVirtToPhysAddr_: f71a0000 -> 00000000:631e4000
  ph data[0]=0:631dc000 (8fff)
  get Phys(data[n=1+9000]=f71a1000)
AtapiVirtToPhysAddr_: f71a1000 -> 00000000:631e5000
  ph data[0]=0:631dc000 (9fff)
  get Phys(data[n=1+a000]=f71a2000)
AtapiVirtToPhysAddr_: f71a2000 -> 00000000:631e6000
  ph data[0]=0:631dc000 (afff)
  get Phys(data[n=1+b000]=f71a3000)
AtapiVirtToPhysAddr_: f71a3000 -> 00000000:631e7000
  ph data[0]=0:631dc000 (bfff)
  get Phys(data[n=1+c000]=f71a4000)
AtapiVirtToPhysAddr_: f71a4000 -> 00000000:631e8000
  ph data[0]=0:631dc000 (cfff)
  get Phys(data[n=1+d000]=f71a5000)
AtapiVirtToPhysAddr_: f71a5000 -> 00000000:631e9000
  ph data[0]=0:631dc000 (dfff)
  get Phys(data[n=1+e000]=f71a6000)
AtapiVirtToPhysAddr_: f71a6000 -> 00000000:631ea000
  ph data[0]=0:631dc000 (efff)
  get Phys(data[n=1+f000]=f71a7000)
AtapiVirtToPhysAddr_: f71a7000 -> 00000000:631eb000
  set TERM
  ph data[0]=0:631dc000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ac8
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffe4d0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffe4d0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f71a8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f71a8000)
AtapiVirtToPhysAddr_: f71a8000 -> 00000000:631ec000
  ph data[0]=0:631ec000 (fff)
  get Phys(data[n=1+1000]=f71a9000)
AtapiVirtToPhysAddr_: f71a9000 -> 00000000:631ed000
  ph data[0]=0:631ec000 (1fff)
  get Phys(data[n=1+2000]=f71aa000)
AtapiVirtToPhysAddr_: f71aa000 -> 00000000:631ee000
  ph data[0]=0:631ec000 (2fff)
  get Phys(data[n=1+3000]=f71ab000)
AtapiVirtToPhysAddr_: f71ab000 -> 00000000:631ef000
  ph data[0]=0:631ec000 (3fff)
  get Phys(data[n=1+4000]=f71ac000)
AtapiVirtToPhysAddr_: f71ac000 -> 00000000:631f0000
  ph data[0]=0:631ec000 (4fff)
  get Phys(data[n=1+5000]=f71ad000)
AtapiVirtToPhysAddr_: f71ad000 -> 00000000:631f1000
  ph data[0]=0:631ec000 (5fff)
  get Phys(data[n=1+6000]=f71ae000)
AtapiVirtToPhysAddr_: f71ae000 -> 00000000:631f2000
  ph data[0]=0:631ec000 (6fff)
  get Phys(data[n=1+7000]=f71af000)
AtapiVirtToPhysAddr_: f71af000 -> 00000000:631f3000
  ph data[0]=0:631ec000 (7fff)
  get Phys(data[n=1+8000]=f71b0000)
AtapiVirtToPhysAddr_: f71b0000 -> 00000000:631f4000
  ph data[0]=0:631ec000 (8fff)
  get Phys(data[n=1+9000]=f71b1000)
AtapiVirtToPhysAddr_: f71b1000 -> 00000000:631f5000
  ph data[0]=0:631ec000 (9fff)
  get Phys(data[n=1+a000]=f71b2000)
AtapiVirtToPhysAddr_: f71b2000 -> 00000000:631f6000
  ph data[0]=0:631ec000 (afff)
  get Phys(data[n=1+b000]=f71b3000)
AtapiVirtToPhysAddr_: f71b3000 -> 00000000:631f7000
  ph data[0]=0:631ec000 (bfff)
  get Phys(data[n=1+c000]=f71b4000)
AtapiVirtToPhysAddr_: f71b4000 -> 00000000:631f8000
  ph data[0]=0:631ec000 (cfff)
  get Phys(data[n=1+d000]=f71b5000)
AtapiVirtToPhysAddr_: f71b5000 -> 00000000:631f9000
  ph data[0]=0:631ec000 (dfff)
  get Phys(data[n=1+e000]=f71b6000)
AtapiVirtToPhysAddr_: f71b6000 -> 00000000:631fa000
  ph data[0]=0:631ec000 (efff)
  get Phys(data[n=1+f000]=f71b7000)
AtapiVirtToPhysAddr_: f71b7000 -> 00000000:631fb000
  set TERM
  ph data[0]=0:631ec000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ac8
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffe550, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffe550, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f71b8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f71b8000)
AtapiVirtToPhysAddr_: f71b8000 -> 00000000:631fc000
  ph data[0]=0:631fc000 (fff)
  get Phys(data[n=1+1000]=f71b9000)
AtapiVirtToPhysAddr_: f71b9000 -> 00000000:631fd000
  ph data[0]=0:631fc000 (1fff)
  get Phys(data[n=1+2000]=f71ba000)
AtapiVirtToPhysAddr_: f71ba000 -> 00000000:631fe000
  ph data[0]=0:631fc000 (2fff)
  get Phys(data[n=1+3000]=f71bb000)
AtapiVirtToPhysAddr_: f71bb000 -> 00000000:631ff000
  ph data[0]=0:631fc000 (3fff)
  get Phys(data[n=1+4000]=f71bc000)
AtapiVirtToPhysAddr_: f71bc000 -> 00000000:63200000
  ph data[0]=0:631fc000 (4fff)
  get Phys(data[n=1+5000]=f71bd000)
AtapiVirtToPhysAddr_: f71bd000 -> 00000000:63201000
  ph data[0]=0:631fc000 (5fff)
  get Phys(data[n=1+6000]=f71be000)
AtapiVirtToPhysAddr_: f71be000 -> 00000000:63202000
  ph data[0]=0:631fc000 (6fff)
  get Phys(data[n=1+7000]=f71bf000)
AtapiVirtToPhysAddr_: f71bf000 -> 00000000:63203000
  ph data[0]=0:631fc000 (7fff)
  get Phys(data[n=1+8000]=f71c0000)
AtapiVirtToPhysAddr_: f71c0000 -> 00000000:63204000
  ph data[0]=0:631fc000 (8fff)
  get Phys(data[n=1+9000]=f71c1000)
AtapiVirtToPhysAddr_: f71c1000 -> 00000000:63205000
  ph data[0]=0:631fc000 (9fff)
  get Phys(data[n=1+a000]=f71c2000)
AtapiVirtToPhysAddr_: f71c2000 -> 00000000:63206000
  ph data[0]=0:631fc000 (afff)
  get Phys(data[n=1+b000]=f71c3000)
AtapiVirtToPhysAddr_: f71c3000 -> 00000000:63207000
  ph data[0]=0:631fc000 (bfff)
  get Phys(data[n=1+c000]=f71c4000)
AtapiVirtToPhysAddr_: f71c4000 -> 00000000:63208000
  ph data[0]=0:631fc000 (cfff)
  get Phys(data[n=1+d000]=f71c5000)
AtapiVirtToPhysAddr_: f71c5000 -> 00000000:63209000
  ph data[0]=0:631fc000 (dfff)
  get Phys(data[n=1+e000]=f71c6000)
AtapiVirtToPhysAddr_: f71c6000 -> 00000000:6320a000
  ph data[0]=0:631fc000 (efff)
  get Phys(data[n=1+f000]=f71c7000)
AtapiVirtToPhysAddr_: f71c7000 -> 00000000:6320b000
  set TERM
  ph data[0]=0:631fc000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffe450, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffe4d0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x1, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb67194b8
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffe550, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb67194b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb67194b8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb67194b8
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ef4
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffe3d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38ffe3d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7510000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7510000)
AtapiVirtToPhysAddr_: f7510000 -> 00000000:624bc000
  ph data[0]=0:624bc000 (fff)
  get Phys(data[n=1+1000]=f7511000)
AtapiVirtToPhysAddr_: f7511000 -> 00000000:624bd000
  set TERM
  ph data[0]=0:624bc000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffe3d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb67194b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb67194b8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\ftfd.dll at F7095000 with 133 pages
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb67194b8
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ef4
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffe5d0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffe5d0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:624f3000
  ph data[0]=0:624f3000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:624fc000
  ph data[1]=0:624fc000 (fff)
  get Phys(data[n=2+1000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:624fd000
  ph data[1]=0:624fc000 (1fff)
  get Phys(data[n=2+2000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:624fe000
  ph data[1]=0:624fc000 (2fff)
  get Phys(data[n=2+3000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:624f7000
  ph data[2]=0:624f7000 (fff)
  get Phys(data[n=3+1000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:624f8000
  ph data[2]=0:624f7000 (1fff)
  get Phys(data[n=3+2000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:624f9000
  ph data[2]=0:624f7000 (2fff)
  get Phys(data[n=3+3000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:62502000
  ph data[3]=0:62502000 (fff)
  get Phys(data[n=4+1000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:624fb000
  ph data[4]=0:624fb000 (fff)
  get Phys(data[n=5+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:62504000
  ph data[5]=0:62504000 (fff)
  get Phys(data[n=6+1000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:62505000
  ph data[5]=0:62504000 (1fff)
  get Phys(data[n=6+2000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:62506000
  ph data[5]=0:62504000 (2fff)
  get Phys(data[n=6+3000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:624ff000
  ph data[6]=0:624ff000 (fff)
  get Phys(data[n=7+1000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:62500000
  ph data[6]=0:624ff000 (1fff)
  get Phys(data[n=7+2000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:62501000
  ph data[6]=0:624ff000 (2fff)
  get Phys(data[n=7+3000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:6250a000
  set TERM
  ph data[7]=0:6250a000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffe5d0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x8, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ef4
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffe650, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffe650, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:62503000
  ph data[0]=0:62503000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:6250c000
  ph data[1]=0:6250c000 (fff)
  get Phys(data[n=2+1000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:6250d000
  ph data[1]=0:6250c000 (1fff)
  get Phys(data[n=2+2000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:6250e000
  ph data[1]=0:6250c000 (2fff)
  get Phys(data[n=2+3000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:62507000
  ph data[2]=0:62507000 (fff)
  get Phys(data[n=3+1000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:62508000
  ph data[2]=0:62507000 (1fff)
  get Phys(data[n=3+2000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:62509000
  ph data[2]=0:62507000 (2fff)
  get Phys(data[n=3+3000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:62512000
  ph data[3]=0:62512000 (fff)
  get Phys(data[n=4+1000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:6250b000
  ph data[4]=0:6250b000 (fff)
  get Phys(data[n=5+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:62514000
  ph data[5]=0:62514000 (fff)
  get Phys(data[n=6+1000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:62515000
  ph data[5]=0:62514000 (1fff)
  get Phys(data[n=6+2000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:62516000
  ph data[5]=0:62514000 (2fff)
  get Phys(data[n=6+3000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:6250f000
  ph data[6]=0:6250f000 (fff)
  get Phys(data[n=7+1000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:62510000
  ph data[6]=0:6250f000 (1fff)
  get Phys(data[n=7+2000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:62511000
  ph data[6]=0:6250f000 (2fff)
  get Phys(data[n=7+3000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:6251a000
  set TERM
  ph data[7]=0:6251a000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ef4
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffe6d0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffe6d0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:62513000
  ph data[0]=0:62513000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:6251c000
  ph data[1]=0:6251c000 (fff)
  get Phys(data[n=2+1000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:6251d000
  ph data[1]=0:6251c000 (1fff)
  get Phys(data[n=2+2000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:6251e000
  ph data[1]=0:6251c000 (2fff)
  get Phys(data[n=2+3000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:62517000
  ph data[2]=0:62517000 (fff)
  get Phys(data[n=3+1000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:62518000
  ph data[2]=0:62517000 (1fff)
  get Phys(data[n=3+2000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:62519000
  ph data[2]=0:62517000 (2fff)
  get Phys(data[n=3+3000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:62522000
  ph data[3]=0:62522000 (fff)
  get Phys(data[n=4+1000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:6251b000
  ph data[4]=0:6251b000 (fff)
  get Phys(data[n=5+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:62524000
  ph data[5]=0:62524000 (fff)
  get Phys(data[n=6+1000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:62525000
  ph data[5]=0:62524000 (1fff)
  get Phys(data[n=6+2000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:62526000
  ph data[5]=0:62524000 (2fff)
  get Phys(data[n=6+3000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:6251f000
  ph data[6]=0:6251f000 (fff)
  get Phys(data[n=7+1000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:62520000
  ph data[6]=0:6251f000 (1fff)
  get Phys(data[n=7+2000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:62521000
  ph data[6]=0:6251f000 (2fff)
  get Phys(data[n=7+3000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:6252a000
  set TERM
  ph data[7]=0:6252a000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb67194b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb67194b8
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d40
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffe650, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x8, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ef4
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffe750, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffe750, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:62523000
  ph data[0]=0:62523000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:6252c000
  ph data[1]=0:6252c000 (fff)
  get Phys(data[n=2+1000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:6252d000
  ph data[1]=0:6252c000 (1fff)
  get Phys(data[n=2+2000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:6252e000
  ph data[1]=0:6252c000 (2fff)
  get Phys(data[n=2+3000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:62527000
  ph data[2]=0:62527000 (fff)
  get Phys(data[n=3+1000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:62528000
  ph data[2]=0:62527000 (1fff)
  get Phys(data[n=3+2000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:62529000
  ph data[2]=0:62527000 (2fff)
  get Phys(data[n=3+3000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:62532000
  ph data[3]=0:62532000 (fff)
  get Phys(data[n=4+1000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:6252b000
  ph data[4]=0:6252b000 (fff)
  get Phys(data[n=5+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:62534000
  ph data[5]=0:62534000 (fff)
  get Phys(data[n=6+1000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:62535000
  ph data[5]=0:62534000 (1fff)
  get Phys(data[n=6+2000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:62536000
  ph data[5]=0:62534000 (2fff)
  get Phys(data[n=6+3000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:6252f000
  ph data[6]=0:6252f000 (fff)
  get Phys(data[n=7+1000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:62530000
  ph data[6]=0:6252f000 (1fff)
  get Phys(data[n=7+2000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:62531000
  ph data[6]=0:6252f000 (2fff)
  get Phys(data[n=7+3000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:6253a000
  set TERM
  ph data[7]=0:6253a000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7665654
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffe6d0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x8, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7665468
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39609c60, OrigWordsRequested 0x5500, DevSize 0x55
IdeReadWrite (REQ): Starting sector is 39609c60, Number of WORDS 0x5500, DevSize 0x55
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f74f4000, count aa00, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:62533000
  ph data[0]=0:62533000 (fff)
  get Phys(data[n=1+1000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:6253c000
  ph data[1]=0:6253c000 (fff)
  get Phys(data[n=2+1000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:6253d000
  ph data[1]=0:6253c000 (1fff)
  get Phys(data[n=2+2000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:6253e000
  ph data[1]=0:6253c000 (2fff)
  get Phys(data[n=2+3000]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:62537000
  ph data[2]=0:62537000 (fff)
  get Phys(data[n=3+1000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:62538000
  ph data[2]=0:62537000 (1fff)
  get Phys(data[n=3+2000]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:62539000
  ph data[2]=0:62537000 (2fff)
  get Phys(data[n=3+3000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:62542000
  ph data[3]=0:62542000 (fff)
  get Phys(data[n=4+1000]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:6253b000
  ph data[4]=0:6253b000 (fff)
  get Phys(data[n=5+1000]=f74fd000)
AtapiVirtToPhysAddr_: f74fd000 -> 00000000:62544000
  ph data[5]=0:62544000 (fff)
  get Phys(data[n=6+1000]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:62545000
  set TERM
  ph data[5]=0:62544000 (19ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb67194b8
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffe750, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x8, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb67194b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb67194b8
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39609c60, Count 0x55(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x6, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ef4
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffe7d0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffe7d0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:6223c000
  ph data[0]=0:6223c000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:6223e000
  ph data[1]=0:6223e000 (fff)
  get Phys(data[n=2+1000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:6223f000
  ph data[1]=0:6223e000 (1fff)
  get Phys(data[n=2+2000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:62240000
  ph data[1]=0:6223e000 (2fff)
  get Phys(data[n=2+3000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:62241000
  ph data[1]=0:6223e000 (3fff)
  get Phys(data[n=2+4000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:62242000
  ph data[1]=0:6223e000 (4fff)
  get Phys(data[n=2+5000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:6224b000
  ph data[2]=0:6224b000 (fff)
  get Phys(data[n=3+1000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:62244000
  ph data[3]=0:62244000 (fff)
  get Phys(data[n=4+1000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:62245000
  ph data[3]=0:62244000 (1fff)
  get Phys(data[n=4+2000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:62246000
  ph data[3]=0:62244000 (2fff)
  get Phys(data[n=4+3000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:62247000
  ph data[3]=0:62244000 (3fff)
  get Phys(data[n=4+4000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:62248000
  ph data[3]=0:62244000 (4fff)
  get Phys(data[n=4+5000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:62249000
  ph data[3]=0:62244000 (5fff)
  get Phys(data[n=4+6000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:6224a000
  ph data[3]=0:62244000 (6fff)
  get Phys(data[n=4+7000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:62253000
  ph data[4]=0:62253000 (fff)
  get Phys(data[n=5+1000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:6224c000
  set TERM
  ph data[5]=0:6224c000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ef4
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffe850, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffe850, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:6224d000
  ph data[0]=0:6224d000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:6224e000
  ph data[0]=0:6224d000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:6224f000
  ph data[0]=0:6224d000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:62250000
  ph data[0]=0:6224d000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:62251000
  ph data[0]=0:6224d000 (4fff)
  get Phys(data[n=1+5000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:62252000
  ph data[0]=0:6224d000 (5fff)
  get Phys(data[n=1+6000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:6225b000
  ph data[1]=0:6225b000 (fff)
  get Phys(data[n=2+1000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:62254000
  ph data[2]=0:62254000 (fff)
  get Phys(data[n=3+1000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:62255000
  ph data[2]=0:62254000 (1fff)
  get Phys(data[n=3+2000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:62256000
  ph data[2]=0:62254000 (2fff)
  get Phys(data[n=3+3000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:62257000
  ph data[2]=0:62254000 (3fff)
  get Phys(data[n=3+4000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:62258000
  ph data[2]=0:62254000 (4fff)
  get Phys(data[n=3+5000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:62259000
  ph data[2]=0:62254000 (5fff)
  get Phys(data[n=3+6000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:6225a000
  ph data[2]=0:62254000 (6fff)
  get Phys(data[n=3+7000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:62263000
  ph data[3]=0:62263000 (fff)
  get Phys(data[n=4+1000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:6225c000
  set TERM
  ph data[4]=0:6225c000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ef4
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffe8d0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffe8d0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:6225d000
  ph data[0]=0:6225d000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:6225e000
  ph data[0]=0:6225d000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:6225f000
  ph data[0]=0:6225d000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:62260000
  ph data[0]=0:6225d000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:62261000
  ph data[0]=0:6225d000 (4fff)
  get Phys(data[n=1+5000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:62262000
  ph data[0]=0:6225d000 (5fff)
  get Phys(data[n=1+6000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:6226b000
  ph data[1]=0:6226b000 (fff)
  get Phys(data[n=2+1000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:62264000
  ph data[2]=0:62264000 (fff)
  get Phys(data[n=3+1000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:62265000
  ph data[2]=0:62264000 (1fff)
  get Phys(data[n=3+2000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:62266000
  ph data[2]=0:62264000 (2fff)
  get Phys(data[n=3+3000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:62267000
  ph data[2]=0:62264000 (3fff)
  get Phys(data[n=3+4000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:62268000
  ph data[2]=0:62264000 (4fff)
  get Phys(data[n=3+5000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:62269000
  ph data[2]=0:62264000 (5fff)
  get Phys(data[n=3+6000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:6226a000
  ph data[2]=0:62264000 (6fff)
  get Phys(data[n=3+7000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:62273000
  ph data[3]=0:62273000 (fff)
  get Phys(data[n=4+1000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:6226c000
  set TERM
  ph data[4]=0:6226c000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=4
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ef4
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffe950, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffe950, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:6226d000
  ph data[0]=0:6226d000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:6226e000
  ph data[0]=0:6226d000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:6226f000
  ph data[0]=0:6226d000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:62270000
  ph data[0]=0:6226d000 (3fff)
  get Phys(data[n=1+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:62271000
  ph data[0]=0:6226d000 (4fff)
  get Phys(data[n=1+5000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:62272000
  ph data[0]=0:6226d000 (5fff)
  get Phys(data[n=1+6000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:6227b000
  ph data[1]=0:6227b000 (fff)
  get Phys(data[n=2+1000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:62274000
  ph data[2]=0:62274000 (fff)
  get Phys(data[n=3+1000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:62275000
  ph data[2]=0:62274000 (1fff)
  get Phys(data[n=3+2000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:62276000
  ph data[2]=0:62274000 (2fff)
  get Phys(data[n=3+3000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:62277000
  ph data[2]=0:62274000 (3fff)
  get Phys(data[n=3+4000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:62278000
  ph data[2]=0:62274000 (4fff)
  get Phys(data[n=3+5000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:62279000
  ph data[2]=0:62274000 (5fff)
  get Phys(data[n=3+6000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:6227a000
  ph data[2]=0:62274000 (6fff)
  get Phys(data[n=3+7000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:62283000
  ph data[3]=0:62283000 (fff)
  get Phys(data[n=4+1000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:6227c000
  set TERM
  ph data[4]=0:6227c000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 5 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 5500, WordsLeft 5500
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered aa00, full size aa00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb67194b8
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=4
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffe7d0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x6, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb67194b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb67194b8
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7665630
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffe850, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x5, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffe8d0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x5, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffe950, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x5, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ef4
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffe9d0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffe9d0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:60d9b000
  ph data[0]=0:60d9b000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:60d94000
  ph data[1]=0:60d94000 (fff)
  get Phys(data[n=2+1000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:60d9d000
  ph data[2]=0:60d9d000 (fff)
  get Phys(data[n=3+1000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:60d9e000
  ph data[2]=0:60d9d000 (1fff)
  get Phys(data[n=3+2000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:60d9f000
  ph data[2]=0:60d9d000 (2fff)
  get Phys(data[n=3+3000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:60da0000
  ph data[2]=0:60d9d000 (3fff)
  get Phys(data[n=3+4000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:60da1000
  ph data[2]=0:60d9d000 (4fff)
  get Phys(data[n=3+5000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:60da2000
  ph data[2]=0:60d9d000 (5fff)
  get Phys(data[n=3+6000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:60da3000
  ph data[2]=0:60d9d000 (6fff)
  get Phys(data[n=3+7000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:60d9c000
  ph data[3]=0:60d9c000 (fff)
  get Phys(data[n=4+1000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:60da5000
  ph data[4]=0:60da5000 (fff)
  get Phys(data[n=5+1000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:60da6000
  ph data[4]=0:60da5000 (1fff)
  get Phys(data[n=5+2000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:60da7000
  ph data[4]=0:60da5000 (2fff)
  get Phys(data[n=5+3000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:60da8000
  ph data[4]=0:60da5000 (3fff)
  get Phys(data[n=5+4000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:60da9000
  ph data[4]=0:60da5000 (4fff)
  get Phys(data[n=5+5000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:60daa000
  set TERM
  ph data[4]=0:60da5000 (5fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffe9d0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x5, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ef4
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffea50, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffea50, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:60dab000
  ph data[0]=0:60dab000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:60da4000
  ph data[1]=0:60da4000 (fff)
  get Phys(data[n=2+1000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:60dad000
  ph data[2]=0:60dad000 (fff)
  get Phys(data[n=3+1000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:60dae000
  ph data[2]=0:60dad000 (1fff)
  get Phys(data[n=3+2000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:60daf000
  ph data[2]=0:60dad000 (2fff)
  get Phys(data[n=3+3000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:60db0000
  ph data[2]=0:60dad000 (3fff)
  get Phys(data[n=3+4000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:60db1000
  ph data[2]=0:60dad000 (4fff)
  get Phys(data[n=3+5000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:60db2000
  ph data[2]=0:60dad000 (5fff)
  get Phys(data[n=3+6000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:60db3000
  ph data[2]=0:60dad000 (6fff)
  get Phys(data[n=3+7000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:60dac000
  ph data[3]=0:60dac000 (fff)
  get Phys(data[n=4+1000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:60db5000
  ph data[4]=0:60db5000 (fff)
  get Phys(data[n=5+1000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:60db6000
  ph data[4]=0:60db5000 (1fff)
  get Phys(data[n=5+2000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:60db7000
  ph data[4]=0:60db5000 (2fff)
  get Phys(data[n=5+3000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:60db8000
  ph data[4]=0:60db5000 (3fff)
  get Phys(data[n=5+4000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:60db9000
  ph data[4]=0:60db5000 (4fff)
  get Phys(data[n=5+5000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:60dba000
  set TERM
  ph data[4]=0:60db5000 (5fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ef4
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffead0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffead0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:60dbb000
  ph data[0]=0:60dbb000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:60db4000
  ph data[1]=0:60db4000 (fff)
  get Phys(data[n=2+1000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:60dbd000
  ph data[2]=0:60dbd000 (fff)
  get Phys(data[n=3+1000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:60dbe000
  ph data[2]=0:60dbd000 (1fff)
  get Phys(data[n=3+2000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:60dbf000
  ph data[2]=0:60dbd000 (2fff)
  get Phys(data[n=3+3000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:60dc0000
  ph data[2]=0:60dbd000 (3fff)
  get Phys(data[n=3+4000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:60dc1000
  ph data[2]=0:60dbd000 (4fff)
  get Phys(data[n=3+5000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:60dc2000
  ph data[2]=0:60dbd000 (5fff)
  get Phys(data[n=3+6000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:60dc3000
  ph data[2]=0:60dbd000 (6fff)
  get Phys(data[n=3+7000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:60dbc000
  ph data[3]=0:60dbc000 (fff)
  get Phys(data[n=4+1000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:60dc5000
  ph data[4]=0:60dc5000 (fff)
  get Phys(data[n=5+1000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:60dc6000
  ph data[4]=0:60dc5000 (1fff)
  get Phys(data[n=5+2000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:60dc7000
  ph data[4]=0:60dc5000 (2fff)
  get Phys(data[n=5+3000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:60dc8000
  ph data[4]=0:60dc5000 (3fff)
  get Phys(data[n=5+4000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:60dc9000
  ph data[4]=0:60dc5000 (4fff)
  get Phys(data[n=5+5000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:60dca000
  set TERM
  ph data[4]=0:60dc5000 (5fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ef4
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffeb50, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffeb50, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:60dcb000
  ph data[0]=0:60dcb000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:60dc4000
  ph data[1]=0:60dc4000 (fff)
  get Phys(data[n=2+1000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:60dcd000
  ph data[2]=0:60dcd000 (fff)
  get Phys(data[n=3+1000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:60dce000
  ph data[2]=0:60dcd000 (1fff)
  get Phys(data[n=3+2000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:60dcf000
  ph data[2]=0:60dcd000 (2fff)
  get Phys(data[n=3+3000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:60dd0000
  ph data[2]=0:60dcd000 (3fff)
  get Phys(data[n=3+4000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:60dd1000
  ph data[2]=0:60dcd000 (4fff)
  get Phys(data[n=3+5000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:60dd2000
  ph data[2]=0:60dcd000 (5fff)
  get Phys(data[n=3+6000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:60dd3000
  ph data[2]=0:60dcd000 (6fff)
  get Phys(data[n=3+7000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:60dcc000
  ph data[3]=0:60dcc000 (fff)
  get Phys(data[n=4+1000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:60dd5000
  ph data[4]=0:60dd5000 (fff)
  get Phys(data[n=5+1000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:60dd6000
  ph data[4]=0:60dd5000 (1fff)
  get Phys(data[n=5+2000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:60dd7000
  ph data[4]=0:60dd5000 (2fff)
  get Phys(data[n=5+3000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:60dd8000
  ph data[4]=0:60dd5000 (3fff)
  get Phys(data[n=5+4000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:60dd9000
  ph data[4]=0:60dd5000 (4fff)
  get Phys(data[n=5+5000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:60dda000
  set TERM
  ph data[4]=0:60dd5000 (5fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d78
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffea50, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x5, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb67194b8
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffead0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x5, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb67194b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb67194b8
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b55f4
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffeb50, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x5, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f970c0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f970c0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7015000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7015000)
AtapiVirtToPhysAddr_: f7015000 -> 00000000:afb12000
  ph data[0]=0:afb12000 (fff)
  get Phys(data[n=1+1000]=f7016000)
AtapiVirtToPhysAddr_: f7016000 -> 00000000:afb13000
  ph data[0]=0:afb12000 (1fff)
  get Phys(data[n=1+2000]=f7017000)
AtapiVirtToPhysAddr_: f7017000 -> 00000000:afb14000
  ph data[0]=0:afb12000 (2fff)
  get Phys(data[n=1+3000]=f7018000)
AtapiVirtToPhysAddr_: f7018000 -> 00000000:afb15000
  ph data[0]=0:afb12000 (3fff)
  get Phys(data[n=1+4000]=f7019000)
AtapiVirtToPhysAddr_: f7019000 -> 00000000:afb1e000
  ph data[1]=0:afb1e000 (fff)
  get Phys(data[n=2+1000]=f701a000)
AtapiVirtToPhysAddr_: f701a000 -> 00000000:afb17000
  ph data[2]=0:afb17000 (fff)
  get Phys(data[n=3+1000]=f701b000)
AtapiVirtToPhysAddr_: f701b000 -> 00000000:afaf0000
  ph data[3]=0:afaf0000 (fff)
  get Phys(data[n=4+1000]=f701c000)
AtapiVirtToPhysAddr_: f701c000 -> 00000000:afb01000
  ph data[4]=0:afb01000 (fff)
  get Phys(data[n=5+1000]=f701d000)
AtapiVirtToPhysAddr_: f701d000 -> 00000000:afb0a000
  ph data[5]=0:afb0a000 (fff)
  get Phys(data[n=6+1000]=f701e000)
AtapiVirtToPhysAddr_: f701e000 -> 00000000:afb0b000
  ph data[5]=0:afb0a000 (1fff)
  get Phys(data[n=6+2000]=f701f000)
AtapiVirtToPhysAddr_: f701f000 -> 00000000:afb0c000
  ph data[5]=0:afb0a000 (2fff)
  get Phys(data[n=6+3000]=f7020000)
AtapiVirtToPhysAddr_: f7020000 -> 00000000:afb0d000
  ph data[5]=0:afb0a000 (3fff)
  get Phys(data[n=6+4000]=f7021000)
AtapiVirtToPhysAddr_: f7021000 -> 00000000:afb16000
  ph data[6]=0:afb16000 (fff)
  get Phys(data[n=7+1000]=f7022000)
AtapiVirtToPhysAddr_: f7022000 -> 00000000:afb0f000
  ph data[7]=0:afb0f000 (fff)
  get Phys(data[n=8+1000]=f7023000)
AtapiVirtToPhysAddr_: f7023000 -> 00000000:afae8000
  ph data[8]=0:afae8000 (fff)
  get Phys(data[n=9+1000]=f7024000)
AtapiVirtToPhysAddr_: f7024000 -> 00000000:afaf9000
  set TERM
  ph data[9]=0:afaf9000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f97140, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f97140, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7025000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7025000)
AtapiVirtToPhysAddr_: f7025000 -> 00000000:afb02000
  ph data[0]=0:afb02000 (fff)
  get Phys(data[n=1+1000]=f7026000)
AtapiVirtToPhysAddr_: f7026000 -> 00000000:afb03000
  ph data[0]=0:afb02000 (1fff)
  get Phys(data[n=1+2000]=f7027000)
AtapiVirtToPhysAddr_: f7027000 -> 00000000:afb04000
  ph data[0]=0:afb02000 (2fff)
  get Phys(data[n=1+3000]=f7028000)
AtapiVirtToPhysAddr_: f7028000 -> 00000000:afb05000
  ph data[0]=0:afb02000 (3fff)
  get Phys(data[n=1+4000]=f7029000)
AtapiVirtToPhysAddr_: f7029000 -> 00000000:afb0e000
  ph data[1]=0:afb0e000 (fff)
  get Phys(data[n=2+1000]=f702a000)
AtapiVirtToPhysAddr_: f702a000 -> 00000000:afb07000
  ph data[2]=0:afb07000 (fff)
  get Phys(data[n=3+1000]=f702b000)
AtapiVirtToPhysAddr_: f702b000 -> 00000000:afae0000
  ph data[3]=0:afae0000 (fff)
  get Phys(data[n=4+1000]=f702c000)
AtapiVirtToPhysAddr_: f702c000 -> 00000000:afaf1000
  ph data[4]=0:afaf1000 (fff)
  get Phys(data[n=5+1000]=f702d000)
AtapiVirtToPhysAddr_: f702d000 -> 00000000:afafa000
  ph data[5]=0:afafa000 (fff)
  get Phys(data[n=6+1000]=f702e000)
AtapiVirtToPhysAddr_: f702e000 -> 00000000:afafb000
  ph data[5]=0:afafa000 (1fff)
  get Phys(data[n=6+2000]=f702f000)
AtapiVirtToPhysAddr_: f702f000 -> 00000000:afafc000
  ph data[5]=0:afafa000 (2fff)
  get Phys(data[n=6+3000]=f7030000)
AtapiVirtToPhysAddr_: f7030000 -> 00000000:afafd000
  ph data[5]=0:afafa000 (3fff)
  get Phys(data[n=6+4000]=f7031000)
AtapiVirtToPhysAddr_: f7031000 -> 00000000:afb06000
  ph data[6]=0:afb06000 (fff)
  get Phys(data[n=7+1000]=f7032000)
AtapiVirtToPhysAddr_: f7032000 -> 00000000:afaff000
  ph data[7]=0:afaff000 (fff)
  get Phys(data[n=8+1000]=f7033000)
AtapiVirtToPhysAddr_: f7033000 -> 00000000:afad8000
  ph data[8]=0:afad8000 (fff)
  get Phys(data[n=9+1000]=f7034000)
AtapiVirtToPhysAddr_: f7034000 -> 00000000:afae9000
  set TERM
  ph data[9]=0:afae9000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677c090, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f971c0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f971c0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7035000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7035000)
AtapiVirtToPhysAddr_: f7035000 -> 00000000:afaf2000
  ph data[0]=0:afaf2000 (fff)
  get Phys(data[n=1+1000]=f7036000)
AtapiVirtToPhysAddr_: f7036000 -> 00000000:afaf3000
  ph data[0]=0:afaf2000 (1fff)
  get Phys(data[n=1+2000]=f7037000)
AtapiVirtToPhysAddr_: f7037000 -> 00000000:afaf4000
  ph data[0]=0:afaf2000 (2fff)
  get Phys(data[n=1+3000]=f7038000)
AtapiVirtToPhysAddr_: f7038000 -> 00000000:afaf5000
  ph data[0]=0:afaf2000 (3fff)
  get Phys(data[n=1+4000]=f7039000)
AtapiVirtToPhysAddr_: f7039000 -> 00000000:afafe000
  ph data[1]=0:afafe000 (fff)
  get Phys(data[n=2+1000]=f703a000)
AtapiVirtToPhysAddr_: f703a000 -> 00000000:afaf7000
  ph data[2]=0:afaf7000 (fff)
  get Phys(data[n=3+1000]=f703b000)
AtapiVirtToPhysAddr_: f703b000 -> 00000000:afad0000
  ph data[3]=0:afad0000 (fff)
  get Phys(data[n=4+1000]=f703c000)
AtapiVirtToPhysAddr_: f703c000 -> 00000000:afae1000
  ph data[4]=0:afae1000 (fff)
  get Phys(data[n=5+1000]=f703d000)
AtapiVirtToPhysAddr_: f703d000 -> 00000000:afaea000
  ph data[5]=0:afaea000 (fff)
  get Phys(data[n=6+1000]=f703e000)
AtapiVirtToPhysAddr_: f703e000 -> 00000000:afaeb000
  ph data[5]=0:afaea000 (1fff)
  get Phys(data[n=6+2000]=f703f000)
AtapiVirtToPhysAddr_: f703f000 -> 00000000:afaec000
  ph data[5]=0:afaea000 (2fff)
  get Phys(data[n=6+3000]=f7040000)
AtapiVirtToPhysAddr_: f7040000 -> 00000000:afaed000
  ph data[5]=0:afaea000 (3fff)
  get Phys(data[n=6+4000]=f7041000)
AtapiVirtToPhysAddr_: f7041000 -> 00000000:afaf6000
  ph data[6]=0:afaf6000 (fff)
  get Phys(data[n=7+1000]=f7042000)
AtapiVirtToPhysAddr_: f7042000 -> 00000000:afaef000
  ph data[7]=0:afaef000 (fff)
  get Phys(data[n=8+1000]=f7043000)
AtapiVirtToPhysAddr_: f7043000 -> 00000000:afac8000
  ph data[8]=0:afac8000 (fff)
  get Phys(data[n=9+1000]=f7044000)
AtapiVirtToPhysAddr_: f7044000 -> 00000000:afad9000
  set TERM
  ph data[9]=0:afad9000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677c090, SCmd 0x2a
UniataNeedQueueing: qd=3
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5644
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f971c0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0xa, flags 0x45, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f97240, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f97240, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7045000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7045000)
AtapiVirtToPhysAddr_: f7045000 -> 00000000:afae2000
  ph data[0]=0:afae2000 (fff)
  get Phys(data[n=1+1000]=f7046000)
AtapiVirtToPhysAddr_: f7046000 -> 00000000:afae3000
  ph data[0]=0:afae2000 (1fff)
  get Phys(data[n=1+2000]=f7047000)
AtapiVirtToPhysAddr_: f7047000 -> 00000000:afae4000
  ph data[0]=0:afae2000 (2fff)
  get Phys(data[n=1+3000]=f7048000)
AtapiVirtToPhysAddr_: f7048000 -> 00000000:afae5000
  ph data[0]=0:afae2000 (3fff)
  get Phys(data[n=1+4000]=f7049000)
AtapiVirtToPhysAddr_: f7049000 -> 00000000:afaee000
  ph data[1]=0:afaee000 (fff)
  get Phys(data[n=2+1000]=f704a000)
AtapiVirtToPhysAddr_: f704a000 -> 00000000:afae7000
  ph data[2]=0:afae7000 (fff)
  get Phys(data[n=3+1000]=f704b000)
AtapiVirtToPhysAddr_: f704b000 -> 00000000:afac0000
  ph data[3]=0:afac0000 (fff)
  get Phys(data[n=4+1000]=f704c000)
AtapiVirtToPhysAddr_: f704c000 -> 00000000:afad1000
  ph data[4]=0:afad1000 (fff)
  get Phys(data[n=5+1000]=f704d000)
AtapiVirtToPhysAddr_: f704d000 -> 00000000:afada000
  ph data[5]=0:afada000 (fff)
  get Phys(data[n=6+1000]=f704e000)
AtapiVirtToPhysAddr_: f704e000 -> 00000000:afadb000
  ph data[5]=0:afada000 (1fff)
  get Phys(data[n=6+2000]=f704f000)
AtapiVirtToPhysAddr_: f704f000 -> 00000000:afadc000
  ph data[5]=0:afada000 (2fff)
  get Phys(data[n=6+3000]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:afadd000
  ph data[5]=0:afada000 (3fff)
  get Phys(data[n=6+4000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:afae6000
  ph data[6]=0:afae6000 (fff)
  get Phys(data[n=7+1000]=f7052000)
AtapiVirtToPhysAddr_: f7052000 -> 00000000:afadf000
  ph data[7]=0:afadf000 (fff)
  get Phys(data[n=8+1000]=f7053000)
AtapiVirtToPhysAddr_: f7053000 -> 00000000:afab8000
  ph data[8]=0:afab8000 (fff)
  get Phys(data[n=9+1000]=f7054000)
AtapiVirtToPhysAddr_: f7054000 -> 00000000:afac9000
  set TERM
  ph data[9]=0:afac9000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: qd=3
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f97240, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0xa, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521170
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f97140, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0xa, flags 0x45, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb67194b8
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb67194b8, CDB 0xb67194e8, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75213cc
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f970c0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0xa, flags 0x45, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b67194b8
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb67194b8, status 1
AtapiInterrupt: RequestComplete, srb 0xb67194b8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f972c0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f972c0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:afad2000
  ph data[0]=0:afad2000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:afad3000
  ph data[0]=0:afad2000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:afad4000
  ph data[0]=0:afad2000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:afad5000
  ph data[0]=0:afad2000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:afade000
  ph data[1]=0:afade000 (fff)
  get Phys(data[n=2+1000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:afad7000
  ph data[2]=0:afad7000 (fff)
  get Phys(data[n=3+1000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:afab0000
  ph data[3]=0:afab0000 (fff)
  get Phys(data[n=4+1000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:afac1000
  ph data[4]=0:afac1000 (fff)
  get Phys(data[n=5+1000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:afaca000
  ph data[5]=0:afaca000 (fff)
  get Phys(data[n=6+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:afacb000
  ph data[5]=0:afaca000 (1fff)
  get Phys(data[n=6+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:afacc000
  ph data[5]=0:afaca000 (2fff)
  get Phys(data[n=6+3000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:afacd000
  ph data[5]=0:afaca000 (3fff)
  get Phys(data[n=6+4000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:afad6000
  ph data[6]=0:afad6000 (fff)
  get Phys(data[n=7+1000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:afacf000
  ph data[7]=0:afacf000 (fff)
  get Phys(data[n=8+1000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:afaa8000
  ph data[8]=0:afaa8000 (fff)
  get Phys(data[n=9+1000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:afab9000
  set TERM
  ph data[9]=0:afab9000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f972c0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0xa, flags 0x45, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f97340, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f97340, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:afac2000
  ph data[0]=0:afac2000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:afac3000
  ph data[0]=0:afac2000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:afac4000
  ph data[0]=0:afac2000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:afac5000
  ph data[0]=0:afac2000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:aface000
  ph data[1]=0:aface000 (fff)
  get Phys(data[n=2+1000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:afac7000
  ph data[2]=0:afac7000 (fff)
  get Phys(data[n=3+1000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:afaa0000
  ph data[3]=0:afaa0000 (fff)
  get Phys(data[n=4+1000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:afab1000
  ph data[4]=0:afab1000 (fff)
  get Phys(data[n=5+1000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:afaba000
  ph data[5]=0:afaba000 (fff)
  get Phys(data[n=6+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:afabb000
  ph data[5]=0:afaba000 (1fff)
  get Phys(data[n=6+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:afabc000
  ph data[5]=0:afaba000 (2fff)
  get Phys(data[n=6+3000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:afabd000
  ph data[5]=0:afaba000 (3fff)
  get Phys(data[n=6+4000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:afac6000
  ph data[6]=0:afac6000 (fff)
  get Phys(data[n=7+1000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:afabf000
  ph data[7]=0:afabf000 (fff)
  get Phys(data[n=8+1000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:afa98000
  ph data[8]=0:afa98000 (fff)
  get Phys(data[n=9+1000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:afaa9000
  set TERM
  ph data[9]=0:afaa9000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f973c0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f973c0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:afab2000
  ph data[0]=0:afab2000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:afab3000
  ph data[0]=0:afab2000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:afab4000
  ph data[0]=0:afab2000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:afab5000
  ph data[0]=0:afab2000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:afabe000
  ph data[1]=0:afabe000 (fff)
  get Phys(data[n=2+1000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:afab7000
  ph data[2]=0:afab7000 (fff)
  get Phys(data[n=3+1000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:afa90000
  ph data[3]=0:afa90000 (fff)
  get Phys(data[n=4+1000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:afaa1000
  ph data[4]=0:afaa1000 (fff)
  get Phys(data[n=5+1000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:afaaa000
  ph data[5]=0:afaaa000 (fff)
  get Phys(data[n=6+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:afaab000
  ph data[5]=0:afaaa000 (1fff)
  get Phys(data[n=6+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:afaac000
  ph data[5]=0:afaaa000 (2fff)
  get Phys(data[n=6+3000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:afaad000
  ph data[5]=0:afaaa000 (3fff)
  get Phys(data[n=6+4000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:afab6000
  ph data[6]=0:afab6000 (fff)
  get Phys(data[n=7+1000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:afaaf000
  ph data[7]=0:afaaf000 (fff)
  get Phys(data[n=8+1000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:afa88000
  ph data[8]=0:afa88000 (fff)
  get Phys(data[n=9+1000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:afa99000
  set TERM
  ph data[9]=0:afa99000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b55f4
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f97340, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0xa, flags 0x45, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f97440, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f97440, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:afaa2000
  ph data[0]=0:afaa2000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:afaa3000
  ph data[0]=0:afaa2000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:afaa4000
  ph data[0]=0:afaa2000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:afaa5000
  ph data[0]=0:afaa2000 (3fff)
  get Phys(data[n=1+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:afaae000
  ph data[1]=0:afaae000 (fff)
  get Phys(data[n=2+1000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:afaa7000
  ph data[2]=0:afaa7000 (fff)
  get Phys(data[n=3+1000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:afa80000
  ph data[3]=0:afa80000 (fff)
  get Phys(data[n=4+1000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:afa91000
  ph data[4]=0:afa91000 (fff)
  get Phys(data[n=5+1000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:afa9a000
  ph data[5]=0:afa9a000 (fff)
  get Phys(data[n=6+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:afa9b000
  ph data[5]=0:afa9a000 (1fff)
  get Phys(data[n=6+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:afa9c000
  ph data[5]=0:afa9a000 (2fff)
  get Phys(data[n=6+3000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:afa9d000
  ph data[5]=0:afa9a000 (3fff)
  get Phys(data[n=6+4000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:afaa6000
  ph data[6]=0:afaa6000 (fff)
  get Phys(data[n=7+1000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:afa9f000
  ph data[7]=0:afa9f000 (fff)
  get Phys(data[n=8+1000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:afa78000
  ph data[8]=0:afa78000 (fff)
  get Phys(data[n=9+1000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:afa89000
  set TERM
  ph data[9]=0:afa89000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f973c0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0xa, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521188
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f97440, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0xa, flags 0x45, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f974c0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f974c0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:afa92000
  ph data[0]=0:afa92000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:afa93000
  ph data[0]=0:afa92000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:afa94000
  ph data[0]=0:afa92000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:afa95000
  ph data[0]=0:afa92000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:afa9e000
  ph data[1]=0:afa9e000 (fff)
  get Phys(data[n=2+1000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:afa97000
  ph data[2]=0:afa97000 (fff)
  get Phys(data[n=3+1000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:afa70000
  ph data[3]=0:afa70000 (fff)
  get Phys(data[n=4+1000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:afa81000
  ph data[4]=0:afa81000 (fff)
  get Phys(data[n=5+1000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:afa8a000
  ph data[5]=0:afa8a000 (fff)
  get Phys(data[n=6+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:afa8b000
  ph data[5]=0:afa8a000 (1fff)
  get Phys(data[n=6+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:afa8c000
  ph data[5]=0:afa8a000 (2fff)
  get Phys(data[n=6+3000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:afa8d000
  ph data[5]=0:afa8a000 (3fff)
  get Phys(data[n=6+4000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:afa96000
  ph data[6]=0:afa96000 (fff)
  get Phys(data[n=7+1000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:afa8f000
  ph data[7]=0:afa8f000 (fff)
  get Phys(data[n=8+1000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:afa68000
  ph data[8]=0:afa68000 (fff)
  get Phys(data[n=9+1000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:afa79000
  set TERM
  ph data[9]=0:afa79000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f974c0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0xa, flags 0x45, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f97540, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f97540, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:afa82000
  ph data[0]=0:afa82000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:afa83000
  ph data[0]=0:afa82000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:afa84000
  ph data[0]=0:afa82000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:afa85000
  ph data[0]=0:afa82000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:afa8e000
  ph data[1]=0:afa8e000 (fff)
  get Phys(data[n=2+1000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:afa87000
  ph data[2]=0:afa87000 (fff)
  get Phys(data[n=3+1000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:afa60000
  ph data[3]=0:afa60000 (fff)
  get Phys(data[n=4+1000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:afa71000
  ph data[4]=0:afa71000 (fff)
  get Phys(data[n=5+1000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:afa7a000
  ph data[5]=0:afa7a000 (fff)
  get Phys(data[n=6+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:afa7b000
  ph data[5]=0:afa7a000 (1fff)
  get Phys(data[n=6+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:afa7c000
  ph data[5]=0:afa7a000 (2fff)
  get Phys(data[n=6+3000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:afa7d000
  ph data[5]=0:afa7a000 (3fff)
  get Phys(data[n=6+4000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:afa86000
  ph data[6]=0:afa86000 (fff)
  get Phys(data[n=7+1000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:afa7f000
  ph data[7]=0:afa7f000 (fff)
  get Phys(data[n=8+1000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:afa58000
  ph data[8]=0:afa58000 (fff)
  get Phys(data[n=9+1000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:afa69000
  set TERM
  ph data[9]=0:afa69000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f975c0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f975c0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:afa72000
  ph data[0]=0:afa72000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:afa73000
  ph data[0]=0:afa72000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:afa74000
  ph data[0]=0:afa72000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:afa75000
  ph data[0]=0:afa72000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:afa7e000
  ph data[1]=0:afa7e000 (fff)
  get Phys(data[n=2+1000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:afa77000
  ph data[2]=0:afa77000 (fff)
  get Phys(data[n=3+1000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:afa50000
  ph data[3]=0:afa50000 (fff)
  get Phys(data[n=4+1000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:afa61000
  ph data[4]=0:afa61000 (fff)
  get Phys(data[n=5+1000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:afa6a000
  ph data[5]=0:afa6a000 (fff)
  get Phys(data[n=6+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:afa6b000
  ph data[5]=0:afa6a000 (1fff)
  get Phys(data[n=6+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:afa6c000
  ph data[5]=0:afa6a000 (2fff)
  get Phys(data[n=6+3000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:afa6d000
  ph data[5]=0:afa6a000 (3fff)
  get Phys(data[n=6+4000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:afa76000
  ph data[6]=0:afa76000 (fff)
  get Phys(data[n=7+1000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:afa6f000
  ph data[7]=0:afa6f000 (fff)
  get Phys(data[n=8+1000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:afa48000
  ph data[8]=0:afa48000 (fff)
  get Phys(data[n=9+1000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:afa59000
  set TERM
  ph data[9]=0:afa59000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f97540, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0xa, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5770
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f97650, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f97650, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:afa62000
  ph data[0]=0:afa62000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:afa63000
  ph data[0]=0:afa62000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:afa64000
  ph data[0]=0:afa62000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:afa65000
  ph data[0]=0:afa62000 (3fff)
  get Phys(data[n=1+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:afa6e000
  ph data[1]=0:afa6e000 (fff)
  get Phys(data[n=2+1000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:afa67000
  ph data[2]=0:afa67000 (fff)
  get Phys(data[n=3+1000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:afa40000
  ph data[3]=0:afa40000 (fff)
  get Phys(data[n=4+1000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:afa51000
  ph data[4]=0:afa51000 (fff)
  get Phys(data[n=5+1000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:afa5a000
  ph data[5]=0:afa5a000 (fff)
  get Phys(data[n=6+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:afa5b000
  ph data[5]=0:afa5a000 (1fff)
  get Phys(data[n=6+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:afa5c000
  ph data[5]=0:afa5a000 (2fff)
  get Phys(data[n=6+3000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:afa5d000
  ph data[5]=0:afa5a000 (3fff)
  get Phys(data[n=6+4000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:afa66000
  ph data[6]=0:afa66000 (fff)
  get Phys(data[n=7+1000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:afa5f000
  ph data[7]=0:afa5f000 (fff)
  get Phys(data[n=8+1000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:afa38000
  ph data[8]=0:afa38000 (fff)
  get Phys(data[n=9+1000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:afa49000
  set TERM
  ph data[9]=0:afa49000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f975c0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0xa, flags 0x45, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7521188
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f97650, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0xa, flags 0x45, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5770
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f976d0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f976d0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:afa52000
  ph data[0]=0:afa52000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:afa53000
  ph data[0]=0:afa52000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:afa54000
  ph data[0]=0:afa52000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:afa55000
  ph data[0]=0:afa52000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:afa5e000
  ph data[1]=0:afa5e000 (fff)
  get Phys(data[n=2+1000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:afa57000
  ph data[2]=0:afa57000 (fff)
  get Phys(data[n=3+1000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:afa30000
  ph data[3]=0:afa30000 (fff)
  get Phys(data[n=4+1000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:afa41000
  ph data[4]=0:afa41000 (fff)
  get Phys(data[n=5+1000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:afa4a000
  ph data[5]=0:afa4a000 (fff)
  get Phys(data[n=6+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:afa4b000
  ph data[5]=0:afa4a000 (1fff)
  get Phys(data[n=6+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:afa4c000
  ph data[5]=0:afa4a000 (2fff)
  get Phys(data[n=6+3000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:afa4d000
  ph data[5]=0:afa4a000 (3fff)
  get Phys(data[n=6+4000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:afa56000
  ph data[6]=0:afa56000 (fff)
  get Phys(data[n=7+1000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:afa4f000
  ph data[7]=0:afa4f000 (fff)
  get Phys(data[n=8+1000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:afa28000
  ph data[8]=0:afa28000 (fff)
  get Phys(data[n=9+1000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:afa39000
  set TERM
  ph data[9]=0:afa39000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f976d0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0xa, flags 0x45, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f97760, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f97760, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:afa42000
  ph data[0]=0:afa42000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:afa43000
  ph data[0]=0:afa42000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:afa44000
  ph data[0]=0:afa42000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:afa45000
  ph data[0]=0:afa42000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:afa4e000
  ph data[1]=0:afa4e000 (fff)
  get Phys(data[n=2+1000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:afa47000
  ph data[2]=0:afa47000 (fff)
  get Phys(data[n=3+1000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:afa20000
  ph data[3]=0:afa20000 (fff)
  get Phys(data[n=4+1000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:afa31000
  ph data[4]=0:afa31000 (fff)
  get Phys(data[n=5+1000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:afa3a000
  ph data[5]=0:afa3a000 (fff)
  get Phys(data[n=6+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:afa3b000
  ph data[5]=0:afa3a000 (1fff)
  get Phys(data[n=6+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:afa3c000
  ph data[5]=0:afa3a000 (2fff)
  get Phys(data[n=6+3000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:afa3d000
  ph data[5]=0:afa3a000 (3fff)
  get Phys(data[n=6+4000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:afa46000
  ph data[6]=0:afa46000 (fff)
  get Phys(data[n=7+1000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:afa3f000
  ph data[7]=0:afa3f000 (fff)
  get Phys(data[n=8+1000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:afa18000
  ph data[8]=0:afa18000 (fff)
  get Phys(data[n=9+1000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:afa29000
  set TERM
  ph data[9]=0:afa29000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f977e0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f977e0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:afa32000
  ph data[0]=0:afa32000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:afa33000
  ph data[0]=0:afa32000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:afa34000
  ph data[0]=0:afa32000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:afa35000
  ph data[0]=0:afa32000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:afa3e000
  ph data[1]=0:afa3e000 (fff)
  get Phys(data[n=2+1000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:afa37000
  ph data[2]=0:afa37000 (fff)
  get Phys(data[n=3+1000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:afa10000
  ph data[3]=0:afa10000 (fff)
  get Phys(data[n=4+1000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:afa21000
  ph data[4]=0:afa21000 (fff)
  get Phys(data[n=5+1000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:afa2a000
  ph data[5]=0:afa2a000 (fff)
  get Phys(data[n=6+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:afa2b000
  ph data[5]=0:afa2a000 (1fff)
  get Phys(data[n=6+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:afa2c000
  ph data[5]=0:afa2a000 (2fff)
  get Phys(data[n=6+3000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:afa2d000
  ph data[5]=0:afa2a000 (3fff)
  get Phys(data[n=6+4000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:afa36000
  ph data[6]=0:afa36000 (fff)
  get Phys(data[n=7+1000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:afa2f000
  ph data[7]=0:afa2f000 (fff)
  get Phys(data[n=8+1000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:afa08000
  ph data[8]=0:afa08000 (fff)
  get Phys(data[n=9+1000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:afa19000
  set TERM
  ph data[9]=0:afa19000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b55f4
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f97760, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0xa, flags 0x45, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5770
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f97870, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f97870, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:afa22000
  ph data[0]=0:afa22000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:afa23000
  ph data[0]=0:afa22000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:afa24000
  ph data[0]=0:afa22000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:afa25000
  ph data[0]=0:afa22000 (3fff)
  get Phys(data[n=1+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:afa2e000
  ph data[1]=0:afa2e000 (fff)
  get Phys(data[n=2+1000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:afa27000
  ph data[2]=0:afa27000 (fff)
  get Phys(data[n=3+1000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:afa00000
  ph data[3]=0:afa00000 (fff)
  get Phys(data[n=4+1000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:afa11000
  ph data[4]=0:afa11000 (fff)
  get Phys(data[n=5+1000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:afa1a000
  ph data[5]=0:afa1a000 (fff)
  get Phys(data[n=6+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:afa1b000
  ph data[5]=0:afa1a000 (1fff)
  get Phys(data[n=6+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:afa1c000
  ph data[5]=0:afa1a000 (2fff)
  get Phys(data[n=6+3000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:afa1d000
  ph data[5]=0:afa1a000 (3fff)
  get Phys(data[n=6+4000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:afa26000
  ph data[6]=0:afa26000 (fff)
  get Phys(data[n=7+1000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:afa1f000
  ph data[7]=0:afa1f000 (fff)
  get Phys(data[n=8+1000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:af9f8000
  ph data[8]=0:af9f8000 (fff)
  get Phys(data[n=9+1000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:afa09000
  set TERM
  ph data[9]=0:afa09000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5644
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f977e0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0xa, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ef4
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffebd0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffebd0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f74d4000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f74d4000)
AtapiVirtToPhysAddr_: f74d4000 -> 00000000:60bf3000
  ph data[0]=0:60bf3000 (fff)
  get Phys(data[n=1+1000]=f74d5000)
AtapiVirtToPhysAddr_: f74d5000 -> 00000000:60bf4000
  ph data[0]=0:60bf3000 (1fff)
  get Phys(data[n=1+2000]=f74d6000)
AtapiVirtToPhysAddr_: f74d6000 -> 00000000:60bf5000
  ph data[0]=0:60bf3000 (2fff)
  get Phys(data[n=1+3000]=f74d7000)
AtapiVirtToPhysAddr_: f74d7000 -> 00000000:60bf6000
  ph data[0]=0:60bf3000 (3fff)
  get Phys(data[n=1+4000]=f74d8000)
AtapiVirtToPhysAddr_: f74d8000 -> 00000000:60bf7000
  ph data[0]=0:60bf3000 (4fff)
  get Phys(data[n=1+5000]=f74d9000)
AtapiVirtToPhysAddr_: f74d9000 -> 00000000:60bf8000
  ph data[0]=0:60bf3000 (5fff)
  get Phys(data[n=1+6000]=f74da000)
AtapiVirtToPhysAddr_: f74da000 -> 00000000:60bf9000
  ph data[0]=0:60bf3000 (6fff)
  get Phys(data[n=1+7000]=f74db000)
AtapiVirtToPhysAddr_: f74db000 -> 00000000:60bf2000
  ph data[1]=0:60bf2000 (fff)
  get Phys(data[n=2+1000]=f74dc000)
AtapiVirtToPhysAddr_: f74dc000 -> 00000000:60bfb000
  ph data[2]=0:60bfb000 (fff)
  get Phys(data[n=3+1000]=f74dd000)
AtapiVirtToPhysAddr_: f74dd000 -> 00000000:60bfc000
  ph data[2]=0:60bfb000 (1fff)
  get Phys(data[n=3+2000]=f74de000)
AtapiVirtToPhysAddr_: f74de000 -> 00000000:60bfd000
  ph data[2]=0:60bfb000 (2fff)
  get Phys(data[n=3+3000]=f74df000)
AtapiVirtToPhysAddr_: f74df000 -> 00000000:60bfe000
  ph data[2]=0:60bfb000 (3fff)
  get Phys(data[n=3+4000]=f74e0000)
AtapiVirtToPhysAddr_: f74e0000 -> 00000000:60bff000
  ph data[2]=0:60bfb000 (4fff)
  get Phys(data[n=3+5000]=f74e1000)
AtapiVirtToPhysAddr_: f74e1000 -> 00000000:60c00000
  ph data[2]=0:60bfb000 (5fff)
  get Phys(data[n=3+6000]=f74e2000)
AtapiVirtToPhysAddr_: f74e2000 -> 00000000:60c01000
  ph data[2]=0:60bfb000 (6fff)
  get Phys(data[n=3+7000]=f74e3000)
AtapiVirtToPhysAddr_: f74e3000 -> 00000000:60bfa000
  set TERM
  ph data[3]=0:60bfa000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520df4
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f97870, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0xa, flags 0x45, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ef4
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffec50, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffec50, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f74e4000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f74e4000)
AtapiVirtToPhysAddr_: f74e4000 -> 00000000:60c03000
  ph data[0]=0:60c03000 (fff)
  get Phys(data[n=1+1000]=f74e5000)
AtapiVirtToPhysAddr_: f74e5000 -> 00000000:60c04000
  ph data[0]=0:60c03000 (1fff)
  get Phys(data[n=1+2000]=f74e6000)
AtapiVirtToPhysAddr_: f74e6000 -> 00000000:60c05000
  ph data[0]=0:60c03000 (2fff)
  get Phys(data[n=1+3000]=f74e7000)
AtapiVirtToPhysAddr_: f74e7000 -> 00000000:60c06000
  ph data[0]=0:60c03000 (3fff)
  get Phys(data[n=1+4000]=f74e8000)
AtapiVirtToPhysAddr_: f74e8000 -> 00000000:60c07000
  ph data[0]=0:60c03000 (4fff)
  get Phys(data[n=1+5000]=f74e9000)
AtapiVirtToPhysAddr_: f74e9000 -> 00000000:60c08000
  ph data[0]=0:60c03000 (5fff)
  get Phys(data[n=1+6000]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:60c09000
  ph data[0]=0:60c03000 (6fff)
  get Phys(data[n=1+7000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:60c02000
  ph data[1]=0:60c02000 (fff)
  get Phys(data[n=2+1000]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:60c0b000
  ph data[2]=0:60c0b000 (fff)
  get Phys(data[n=3+1000]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:60c0c000
  ph data[2]=0:60c0b000 (1fff)
  get Phys(data[n=3+2000]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:60c0d000
  ph data[2]=0:60c0b000 (2fff)
  get Phys(data[n=3+3000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:60c0e000
  ph data[2]=0:60c0b000 (3fff)
  get Phys(data[n=3+4000]=f74f0000)
AtapiVirtToPhysAddr_: f74f0000 -> 00000000:60c0f000
  ph data[2]=0:60c0b000 (4fff)
  get Phys(data[n=3+5000]=f74f1000)
AtapiVirtToPhysAddr_: f74f1000 -> 00000000:60c10000
  ph data[2]=0:60c0b000 (5fff)
  get Phys(data[n=3+6000]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:60c11000
  ph data[2]=0:60c0b000 (6fff)
  get Phys(data[n=3+7000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:60c0a000
  set TERM
  ph data[3]=0:60c0a000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffebd0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x4, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5770
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f978f0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f978f0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:afa12000
  ph data[0]=0:afa12000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:afa13000
  ph data[0]=0:afa12000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:afa14000
  ph data[0]=0:afa12000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:afa15000
  ph data[0]=0:afa12000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:afa1e000
  ph data[1]=0:afa1e000 (fff)
  get Phys(data[n=2+1000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:afa17000
  ph data[2]=0:afa17000 (fff)
  get Phys(data[n=3+1000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:af9f0000
  ph data[3]=0:af9f0000 (fff)
  get Phys(data[n=4+1000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:afa01000
  ph data[4]=0:afa01000 (fff)
  get Phys(data[n=5+1000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:afa0a000
  ph data[5]=0:afa0a000 (fff)
  get Phys(data[n=6+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:afa0b000
  ph data[5]=0:afa0a000 (1fff)
  get Phys(data[n=6+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:afa0c000
  ph data[5]=0:afa0a000 (2fff)
  get Phys(data[n=6+3000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:afa0d000
  ph data[5]=0:afa0a000 (3fff)
  get Phys(data[n=6+4000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:afa16000
  ph data[6]=0:afa16000 (fff)
  get Phys(data[n=7+1000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:afa0f000
  ph data[7]=0:afa0f000 (fff)
  get Phys(data[n=8+1000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:af9e8000
  ph data[8]=0:af9e8000 (fff)
  get Phys(data[n=9+1000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:af9f9000
  set TERM
  ph data[9]=0:af9f9000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5644
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffec50, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f97980, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f97980, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:afa02000
  ph data[0]=0:afa02000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:afa03000
  ph data[0]=0:afa02000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:afa04000
  ph data[0]=0:afa02000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:afa05000
  ph data[0]=0:afa02000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:afa0e000
  ph data[1]=0:afa0e000 (fff)
  get Phys(data[n=2+1000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:afa07000
  ph data[2]=0:afa07000 (fff)
  get Phys(data[n=3+1000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:af9e0000
  ph data[3]=0:af9e0000 (fff)
  get Phys(data[n=4+1000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:af9f1000
  ph data[4]=0:af9f1000 (fff)
  get Phys(data[n=5+1000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:af9fa000
  ph data[5]=0:af9fa000 (fff)
  get Phys(data[n=6+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:af9fb000
  ph data[5]=0:af9fa000 (1fff)
  get Phys(data[n=6+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:af9fc000
  ph data[5]=0:af9fa000 (2fff)
  get Phys(data[n=6+3000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:af9fd000
  ph data[5]=0:af9fa000 (3fff)
  get Phys(data[n=6+4000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:afa06000
  ph data[6]=0:afa06000 (fff)
  get Phys(data[n=7+1000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:af9ff000
  ph data[7]=0:af9ff000 (fff)
  get Phys(data[n=8+1000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:af9d8000
  ph data[8]=0:af9d8000 (fff)
  get Phys(data[n=9+1000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:af9e9000
  set TERM
  ph data[9]=0:af9e9000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b55f4
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f97980, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0xa, flags 0x45, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f97a00, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f97a00, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:af9f2000
  ph data[0]=0:af9f2000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:af9f3000
  ph data[0]=0:af9f2000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:af9f4000
  ph data[0]=0:af9f2000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:af9f5000
  ph data[0]=0:af9f2000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:af9fe000
  ph data[1]=0:af9fe000 (fff)
  get Phys(data[n=2+1000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:af9f7000
  ph data[2]=0:af9f7000 (fff)
  get Phys(data[n=3+1000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:af9d0000
  ph data[3]=0:af9d0000 (fff)
  get Phys(data[n=4+1000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:af9e1000
  ph data[4]=0:af9e1000 (fff)
  get Phys(data[n=5+1000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:af9ea000
  ph data[5]=0:af9ea000 (fff)
  get Phys(data[n=6+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:af9eb000
  ph data[5]=0:af9ea000 (1fff)
  get Phys(data[n=6+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:af9ec000
  ph data[5]=0:af9ea000 (2fff)
  get Phys(data[n=6+3000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:af9ed000
  ph data[5]=0:af9ea000 (3fff)
  get Phys(data[n=6+4000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:af9f6000
  ph data[6]=0:af9f6000 (fff)
  get Phys(data[n=7+1000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:af9ef000
  ph data[7]=0:af9ef000 (fff)
  get Phys(data[n=8+1000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:af9c8000
  ph data[8]=0:af9c8000 (fff)
  get Phys(data[n=9+1000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:af9d9000
  set TERM
  ph data[9]=0:af9d9000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f97a00, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0xa, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5770
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f97a90, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f97a90, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:af9e2000
  ph data[0]=0:af9e2000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:af9e3000
  ph data[0]=0:af9e2000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:af9e4000
  ph data[0]=0:af9e2000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:af9e5000
  ph data[0]=0:af9e2000 (3fff)
  get Phys(data[n=1+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:af9ee000
  ph data[1]=0:af9ee000 (fff)
  get Phys(data[n=2+1000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:af9e7000
  ph data[2]=0:af9e7000 (fff)
  get Phys(data[n=3+1000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:af9c0000
  ph data[3]=0:af9c0000 (fff)
  get Phys(data[n=4+1000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:af9d1000
  ph data[4]=0:af9d1000 (fff)
  get Phys(data[n=5+1000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:af9da000
  ph data[5]=0:af9da000 (fff)
  get Phys(data[n=6+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:af9db000
  ph data[5]=0:af9da000 (1fff)
  get Phys(data[n=6+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:af9dc000
  ph data[5]=0:af9da000 (2fff)
  get Phys(data[n=6+3000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:af9dd000
  ph data[5]=0:af9da000 (3fff)
  get Phys(data[n=6+4000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:af9e6000
  ph data[6]=0:af9e6000 (fff)
  get Phys(data[n=7+1000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:af9df000
  ph data[7]=0:af9df000 (fff)
  get Phys(data[n=8+1000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:af9b8000
  ph data[8]=0:af9b8000 (fff)
  get Phys(data[n=9+1000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:af9c9000
  set TERM
  ph data[9]=0:af9c9000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5644
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f97a90, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0xa, flags 0x45, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ef4
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffecd0, OrigWordsRequested 0x5500, DevSize 0x55
IdeReadWrite (REQ): Starting sector is 38ffecd0, Number of WORDS 0x5500, DevSize 0x55
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f74f4000, count aa00, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:60c13000
  ph data[0]=0:60c13000 (fff)
  get Phys(data[n=1+1000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:60c14000
  ph data[0]=0:60c13000 (1fff)
  get Phys(data[n=1+2000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:60c15000
  ph data[0]=0:60c13000 (2fff)
  get Phys(data[n=1+3000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:60c16000
  ph data[0]=0:60c13000 (3fff)
  get Phys(data[n=1+4000]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:60c17000
  ph data[0]=0:60c13000 (4fff)
  get Phys(data[n=1+5000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:60c18000
  ph data[0]=0:60c13000 (5fff)
  get Phys(data[n=1+6000]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:60c19000
  ph data[0]=0:60c13000 (6fff)
  get Phys(data[n=1+7000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:60c12000
  ph data[1]=0:60c12000 (fff)
  get Phys(data[n=2+1000]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:60c1b000
  ph data[2]=0:60c1b000 (fff)
  get Phys(data[n=3+1000]=f74fd000)
AtapiVirtToPhysAddr_: f74fd000 -> 00000000:60c1c000
  ph data[2]=0:60c1b000 (1fff)
  get Phys(data[n=3+2000]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:60c1d000
  set TERM
  ph data[2]=0:60c1b000 (29ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520dc8
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f978f0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0xa, flags 0x45, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffecd0, Count 0x55(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x3, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 5500, WordsLeft 5500
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered aa00, full size aa00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5770
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f97b10, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f97b10, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:af9d2000
  ph data[0]=0:af9d2000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:af9d3000
  ph data[0]=0:af9d2000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:af9d4000
  ph data[0]=0:af9d2000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:af9d5000
  ph data[0]=0:af9d2000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:af9de000
  ph data[1]=0:af9de000 (fff)
  get Phys(data[n=2+1000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:af9d7000
  ph data[2]=0:af9d7000 (fff)
  get Phys(data[n=3+1000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:af9b0000
  ph data[3]=0:af9b0000 (fff)
  get Phys(data[n=4+1000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:af9c1000
  ph data[4]=0:af9c1000 (fff)
  get Phys(data[n=5+1000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:af9ca000
  ph data[5]=0:af9ca000 (fff)
  get Phys(data[n=6+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:af9cb000
  ph data[5]=0:af9ca000 (1fff)
  get Phys(data[n=6+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:af9cc000
  ph data[5]=0:af9ca000 (2fff)
  get Phys(data[n=6+3000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:af9cd000
  ph data[5]=0:af9ca000 (3fff)
  get Phys(data[n=6+4000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:af9d6000
  ph data[6]=0:af9d6000 (fff)
  get Phys(data[n=7+1000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:af9cf000
  ph data[7]=0:af9cf000 (fff)
  get Phys(data[n=8+1000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:af9a8000
  ph data[8]=0:af9a8000 (fff)
  get Phys(data[n=9+1000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:af9b9000
  set TERM
  ph data[9]=0:af9b9000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f97b10, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0xa, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f97ba0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f97ba0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:af9c2000
  ph data[0]=0:af9c2000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:af9c3000
  ph data[0]=0:af9c2000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:af9c4000
  ph data[0]=0:af9c2000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:af9c5000
  ph data[0]=0:af9c2000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:af9ce000
  ph data[1]=0:af9ce000 (fff)
  get Phys(data[n=2+1000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:af9c7000
  ph data[2]=0:af9c7000 (fff)
  get Phys(data[n=3+1000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:af9a0000
  ph data[3]=0:af9a0000 (fff)
  get Phys(data[n=4+1000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:af9b1000
  ph data[4]=0:af9b1000 (fff)
  get Phys(data[n=5+1000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:af9ba000
  ph data[5]=0:af9ba000 (fff)
  get Phys(data[n=6+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:af9bb000
  ph data[5]=0:af9ba000 (1fff)
  get Phys(data[n=6+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:af9bc000
  ph data[5]=0:af9ba000 (2fff)
  get Phys(data[n=6+3000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:af9bd000
  ph data[5]=0:af9ba000 (3fff)
  get Phys(data[n=6+4000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:af9c6000
  ph data[6]=0:af9c6000 (fff)
  get Phys(data[n=7+1000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:af9bf000
  ph data[7]=0:af9bf000 (fff)
  get Phys(data[n=8+1000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:af998000
  ph data[8]=0:af998000 (fff)
  get Phys(data[n=9+1000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:af9a9000
  set TERM
  ph data[9]=0:af9a9000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f97c20, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f97c20, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:af9b2000
  ph data[0]=0:af9b2000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:af9b3000
  ph data[0]=0:af9b2000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:af9b4000
  ph data[0]=0:af9b2000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:af9b5000
  ph data[0]=0:af9b2000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:af9be000
  ph data[1]=0:af9be000 (fff)
  get Phys(data[n=2+1000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:af9b7000
  ph data[2]=0:af9b7000 (fff)
  get Phys(data[n=3+1000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:af990000
  ph data[3]=0:af990000 (fff)
  get Phys(data[n=4+1000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:af9a1000
  ph data[4]=0:af9a1000 (fff)
  get Phys(data[n=5+1000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:af9aa000
  ph data[5]=0:af9aa000 (fff)
  get Phys(data[n=6+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:af9ab000
  ph data[5]=0:af9aa000 (1fff)
  get Phys(data[n=6+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:af9ac000
  ph data[5]=0:af9aa000 (2fff)
  get Phys(data[n=6+3000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:af9ad000
  ph data[5]=0:af9aa000 (3fff)
  get Phys(data[n=6+4000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:af9b6000
  ph data[6]=0:af9b6000 (fff)
  get Phys(data[n=7+1000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:af9af000
  ph data[7]=0:af9af000 (fff)
  get Phys(data[n=8+1000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:af988000
  ph data[8]=0:af988000 (fff)
  get Phys(data[n=9+1000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:af999000
  set TERM
  ph data[9]=0:af999000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b55f4
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f97ba0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0xa, flags 0x45, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f97ca0, OrigWordsRequested 0x2000, DevSize 0x20
IdeReadWrite (REQ): Starting sector is 38f97ca0, Number of WORDS 0x2000, DevSize 0x20
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7085000, count 4000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:af9a2000
  ph data[0]=0:af9a2000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:af9a3000
  ph data[0]=0:af9a2000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:af9a4000
  ph data[0]=0:af9a2000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:af9a5000
  set TERM
  ph data[0]=0:af9a2000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f97c20, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0xa, flags 0x45, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5770
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f97cd0, OrigWordsRequested 0x6000, DevSize 0x60
IdeReadWrite (REQ): Starting sector is 38f97cd0, Number of WORDS 0x6000, DevSize 0x60
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7089000, count c000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:af9ae000
  ph data[0]=0:af9ae000 (fff)
  get Phys(data[n=1+1000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:af9a7000
  ph data[1]=0:af9a7000 (fff)
  get Phys(data[n=2+1000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:af980000
  ph data[2]=0:af980000 (fff)
  get Phys(data[n=3+1000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:af991000
  ph data[3]=0:af991000 (fff)
  get Phys(data[n=4+1000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:af99a000
  ph data[4]=0:af99a000 (fff)
  get Phys(data[n=5+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:af99b000
  ph data[4]=0:af99a000 (1fff)
  get Phys(data[n=5+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:af99c000
  ph data[4]=0:af99a000 (2fff)
  get Phys(data[n=5+3000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:af99d000
  ph data[4]=0:af99a000 (3fff)
  get Phys(data[n=5+4000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:af9a6000
  ph data[5]=0:af9a6000 (fff)
  get Phys(data[n=6+1000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:af99f000
  ph data[6]=0:af99f000 (fff)
  get Phys(data[n=7+1000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:af978000
  ph data[7]=0:af978000 (fff)
  get Phys(data[n=8+1000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:af989000
  set TERM
  ph data[8]=0:af989000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f97ca0, Count 0x20(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 2000, WordsLeft 2000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 4000, full size 4000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdc14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f97cd0, Count 0x60(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x9, flags 0x45, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 6000, WordsLeft 6000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered c000, full size c000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5770
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f97d30, OrigWordsRequested 0x4000, DevSize 0x40
IdeReadWrite (REQ): Starting sector is 38f97d30, Number of WORDS 0x4000, DevSize 0x40
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7055000, count 8000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:af992000
  ph data[0]=0:af992000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:af993000
  ph data[0]=0:af992000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:af994000
  ph data[0]=0:af992000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:af995000
  ph data[0]=0:af992000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:af99e000
  ph data[1]=0:af99e000 (fff)
  get Phys(data[n=2+1000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:af997000
  ph data[2]=0:af997000 (fff)
  get Phys(data[n=3+1000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:af970000
  ph data[3]=0:af970000 (fff)
  get Phys(data[n=4+1000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:af981000
  set TERM
  ph data[4]=0:af981000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f97d30, Count 0x40(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x5, flags 0x45, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f97d80, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f97d80, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f705d000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:af98a000
  ph data[0]=0:af98a000 (fff)
  get Phys(data[n=1+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:af98b000
  ph data[0]=0:af98a000 (1fff)
  get Phys(data[n=1+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:af98c000
  ph data[0]=0:af98a000 (2fff)
  get Phys(data[n=1+3000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:af98d000
  ph data[0]=0:af98a000 (3fff)
  get Phys(data[n=1+4000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:af996000
  ph data[1]=0:af996000 (fff)
  get Phys(data[n=2+1000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:af98f000
  ph data[2]=0:af98f000 (fff)
  get Phys(data[n=3+1000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:af968000
  ph data[3]=0:af968000 (fff)
  get Phys(data[n=4+1000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:af979000
  ph data[4]=0:af979000 (fff)
  get Phys(data[n=5+1000]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:af982000
  ph data[5]=0:af982000 (fff)
  get Phys(data[n=6+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:af983000
  ph data[5]=0:af982000 (1fff)
  get Phys(data[n=6+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:af984000
  ph data[5]=0:af982000 (2fff)
  get Phys(data[n=6+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:af985000
  ph data[5]=0:af982000 (3fff)
  get Phys(data[n=6+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:af98e000
  ph data[6]=0:af98e000 (fff)
  get Phys(data[n=7+1000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:af987000
  ph data[7]=0:af987000 (fff)
  get Phys(data[n=8+1000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:af960000
  ph data[8]=0:af960000 (fff)
  get Phys(data[n=9+1000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:af971000
  set TERM
  ph data[9]=0:af971000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 4000, WordsLeft 4000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 8000, full size 8000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b55f4
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f97d80, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0xa, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f97e00, OrigWordsRequested 0x2000, DevSize 0x20
IdeReadWrite (REQ): Starting sector is 38f97e00, Number of WORDS 0x2000, DevSize 0x20
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f706d000, count 4000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:af97a000
  ph data[0]=0:af97a000 (fff)
  get Phys(data[n=1+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:af97b000
  ph data[0]=0:af97a000 (1fff)
  get Phys(data[n=1+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:af97c000
  ph data[0]=0:af97a000 (2fff)
  get Phys(data[n=1+3000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:af97d000
  set TERM
  ph data[0]=0:af97a000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b555c
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f97e00, Count 0x20(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x45, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 2000, WordsLeft 2000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 4000, full size 4000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f97e30, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f97e30, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7071000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:af986000
  ph data[0]=0:af986000 (fff)
  get Phys(data[n=1+1000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:af97f000
  ph data[1]=0:af97f000 (fff)
  get Phys(data[n=2+1000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:af958000
  ph data[2]=0:af958000 (fff)
  get Phys(data[n=3+1000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:af969000
  ph data[3]=0:af969000 (fff)
  get Phys(data[n=4+1000]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:af972000
  ph data[4]=0:af972000 (fff)
  get Phys(data[n=5+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:af973000
  ph data[4]=0:af972000 (1fff)
  get Phys(data[n=5+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:af974000
  ph data[4]=0:af972000 (2fff)
  get Phys(data[n=5+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:af975000
  ph data[4]=0:af972000 (3fff)
  get Phys(data[n=5+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:af97e000
  ph data[5]=0:af97e000 (fff)
  get Phys(data[n=6+1000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:af977000
  ph data[6]=0:af977000 (fff)
  get Phys(data[n=7+1000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:af950000
  ph data[7]=0:af950000 (fff)
  get Phys(data[n=8+1000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:af961000
  ph data[8]=0:af961000 (fff)
  get Phys(data[n=9+1000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:af96a000
  ph data[9]=0:af96a000 (fff)
  get Phys(data[n=10+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:af96b000
  ph data[9]=0:af96a000 (1fff)
  get Phys(data[n=10+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:af96c000
  ph data[9]=0:af96a000 (2fff)
  get Phys(data[n=10+3000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:af96d000
  set TERM
  ph data[9]=0:af96a000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f97e30, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0xa, flags 0x45, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f97eb0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f97eb0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7081000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:af976000
  ph data[0]=0:af976000 (fff)
  get Phys(data[n=1+1000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:af96f000
  ph data[1]=0:af96f000 (fff)
  get Phys(data[n=2+1000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:af948000
  ph data[2]=0:af948000 (fff)
  get Phys(data[n=3+1000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:af959000
  ph data[3]=0:af959000 (fff)
  get Phys(data[n=4+1000]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:af962000
  ph data[4]=0:af962000 (fff)
  get Phys(data[n=5+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:af963000
  ph data[4]=0:af962000 (1fff)
  get Phys(data[n=5+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:af964000
  ph data[4]=0:af962000 (2fff)
  get Phys(data[n=5+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:af965000
  ph data[4]=0:af962000 (3fff)
  get Phys(data[n=5+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:af96e000
  ph data[5]=0:af96e000 (fff)
  get Phys(data[n=6+1000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:af967000
  ph data[6]=0:af967000 (fff)
  get Phys(data[n=7+1000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:af940000
  ph data[7]=0:af940000 (fff)
  get Phys(data[n=8+1000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:af951000
  ph data[8]=0:af951000 (fff)
  get Phys(data[n=9+1000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:af95a000
  ph data[9]=0:af95a000 (fff)
  get Phys(data[n=10+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:af95b000
  ph data[9]=0:af95a000 (1fff)
  get Phys(data[n=10+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:af95c000
  ph data[9]=0:af95a000 (2fff)
  get Phys(data[n=10+3000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:af95d000
  set TERM
  ph data[9]=0:af95a000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5770
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f97f40, OrigWordsRequested 0x2000, DevSize 0x20
IdeReadWrite (REQ): Starting sector is 38f97f40, Number of WORDS 0x2000, DevSize 0x20
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7091000, count 4000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:af966000
  ph data[0]=0:af966000 (fff)
  get Phys(data[n=1+1000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:af95f000
  ph data[1]=0:af95f000 (fff)
  get Phys(data[n=2+1000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:af938000
  ph data[2]=0:af938000 (fff)
  get Phys(data[n=3+1000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:af949000
  set TERM
  ph data[3]=0:af949000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5644
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f97eb0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0xa, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75213cc
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f97f40, Count 0x20(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x4, flags 0x45, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 2000, WordsLeft 2000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 4000, full size 4000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520bdc
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903d120, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 3903d120, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:60c83000
  ph data[0]=0:60c83000 (fff)
  get Phys(data[n=1+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:60c8c000
  set TERM
  ph data[1]=0:60c8c000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903d120, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x2, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520bdc
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3904b640, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 3904b640, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7510000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7510000)
AtapiVirtToPhysAddr_: f7510000 -> 00000000:60c8d000
  ph data[0]=0:60c8d000 (fff)
  get Phys(data[n=1+1000]=f7511000)
AtapiVirtToPhysAddr_: f7511000 -> 00000000:60c8e000
  set TERM
  ph data[0]=0:60c8d000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
(drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb
(drivers/usb/usbehci/hardware.cpp:1321) CStatus b
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3904b640, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7665468
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39609e60, OrigWordsRequested 0x8500, DevSize 0x85
IdeReadWrite (REQ): Starting sector is 39609e60, Number of WORDS 0x8500, DevSize 0x85
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f74ee000, count 10a00, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:5e55e000
  ph data[0]=0:5e55e000 (fff)
  get Phys(data[n=1+1000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:5e55f000
  ph data[0]=0:5e55e000 (1fff)
  get Phys(data[n=1+2000]=f74f0000)
AtapiVirtToPhysAddr_: f74f0000 -> 00000000:5e560000
  ph data[0]=0:5e55e000 (2fff)
  get Phys(data[n=1+3000]=f74f1000)
AtapiVirtToPhysAddr_: f74f1000 -> 00000000:5e561000
  ph data[0]=0:5e55e000 (3fff)
  get Phys(data[n=1+4000]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:5e562000
  ph data[0]=0:5e55e000 (4fff)
  get Phys(data[n=1+5000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:5e563000
  ph data[0]=0:5e55e000 (5fff)
  get Phys(data[n=1+6000]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:5e564000
  ph data[0]=0:5e55e000 (6fff)
  get Phys(data[n=1+7000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:5e565000
  ph data[0]=0:5e55e000 (7fff)
  get Phys(data[n=1+8000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:5e566000
  ph data[0]=0:5e55e000 (8fff)
  get Phys(data[n=1+9000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:5e567000
  ph data[0]=0:5e55e000 (9fff)
  get Phys(data[n=1+a000]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:5e568000
  ph data[0]=0:5e55e000 (afff)
  get Phys(data[n=1+b000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:5e569000
  ph data[0]=0:5e55e000 (bfff)
  get Phys(data[n=1+c000]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:5e56a000
  ph data[0]=0:5e55e000 (cfff)
  get Phys(data[n=1+d000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:5e56b000
  ph data[0]=0:5e55e000 (dfff)
  get Phys(data[n=1+e000]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:5e56c000
  ph data[0]=0:5e55e000 (efff)
  get Phys(data[n=1+f000]=f74fd000)
AtapiVirtToPhysAddr_: f74fd000 -> 00000000:5e56d000
  ph data[0]=0:5e55e000 (ffff)
  get Phys(data[n=1+10000]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:5e56e000
  set TERM
  ph data[0]=0:5e55e000 (109ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39609e60, Count 0x85(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903d130, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903d130, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:5e59e000
  ph data[0]=0:5e59e000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:5e59f000
  ph data[0]=0:5e59e000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:5e5a0000
  ph data[0]=0:5e59e000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:5e5a1000
  ph data[0]=0:5e59e000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:5e5a2000
  ph data[0]=0:5e59e000 (4fff)
  get Phys(data[n=1+5000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:5e5a3000
  ph data[0]=0:5e59e000 (5fff)
  get Phys(data[n=1+6000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:5e5a4000
  ph data[0]=0:5e59e000 (6fff)
  get Phys(data[n=1+7000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:5e5a5000
  ph data[0]=0:5e59e000 (7fff)
  get Phys(data[n=1+8000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:5e5a6000
  ph data[0]=0:5e59e000 (8fff)
  get Phys(data[n=1+9000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:5e5a7000
  ph data[0]=0:5e59e000 (9fff)
  get Phys(data[n=1+a000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:5e5a8000
  ph data[0]=0:5e59e000 (afff)
  get Phys(data[n=1+b000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:5e5a9000
  ph data[0]=0:5e59e000 (bfff)
  get Phys(data[n=1+c000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:5e5aa000
  ph data[0]=0:5e59e000 (cfff)
  get Phys(data[n=1+d000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:5e5ab000
  ph data[0]=0:5e59e000 (dfff)
  get Phys(data[n=1+e000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:5e5ac000
  ph data[0]=0:5e59e000 (efff)
  get Phys(data[n=1+f000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:5e5ad000
  set TERM
  ph data[0]=0:5e59e000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903d1b0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903d1b0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:5e5ae000
  ph data[0]=0:5e5ae000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:5e5af000
  ph data[0]=0:5e5ae000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:5e5b0000
  ph data[0]=0:5e5ae000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:5e5b1000
  ph data[0]=0:5e5ae000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:5e5b2000
  ph data[0]=0:5e5ae000 (4fff)
  get Phys(data[n=1+5000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:5e5b3000
  ph data[0]=0:5e5ae000 (5fff)
  get Phys(data[n=1+6000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:5e5b4000
  ph data[0]=0:5e5ae000 (6fff)
  get Phys(data[n=1+7000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:5e5b5000
  ph data[0]=0:5e5ae000 (7fff)
  get Phys(data[n=1+8000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:5e5b6000
  ph data[0]=0:5e5ae000 (8fff)
  get Phys(data[n=1+9000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:5e5b7000
  ph data[0]=0:5e5ae000 (9fff)
  get Phys(data[n=1+a000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:5e5b8000
  ph data[0]=0:5e5ae000 (afff)
  get Phys(data[n=1+b000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:5e5b9000
  ph data[0]=0:5e5ae000 (bfff)
  get Phys(data[n=1+c000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:5e5ba000
  ph data[0]=0:5e5ae000 (cfff)
  get Phys(data[n=1+d000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:5e5bb000
  ph data[0]=0:5e5ae000 (dfff)
  get Phys(data[n=1+e000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:5e5bc000
  ph data[0]=0:5e5ae000 (efff)
  get Phys(data[n=1+f000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:5e5bd000
  set TERM
  ph data[0]=0:5e5ae000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903d230, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903d230, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:5e5be000
  ph data[0]=0:5e5be000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:5e5bf000
  ph data[0]=0:5e5be000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:5e5c0000
  ph data[0]=0:5e5be000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:5e5c1000
  ph data[0]=0:5e5be000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:5e5c2000
  ph data[0]=0:5e5be000 (4fff)
  get Phys(data[n=1+5000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:5e5c3000
  ph data[0]=0:5e5be000 (5fff)
  get Phys(data[n=1+6000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:5e5c4000
  ph data[0]=0:5e5be000 (6fff)
  get Phys(data[n=1+7000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:5e5c5000
  ph data[0]=0:5e5be000 (7fff)
  get Phys(data[n=1+8000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:5e5c6000
  ph data[0]=0:5e5be000 (8fff)
  get Phys(data[n=1+9000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:5e5c7000
  ph data[0]=0:5e5be000 (9fff)
  get Phys(data[n=1+a000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:5e5c8000
  ph data[0]=0:5e5be000 (afff)
  get Phys(data[n=1+b000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:5e5c9000
  ph data[0]=0:5e5be000 (bfff)
  get Phys(data[n=1+c000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:5e5ca000
  ph data[0]=0:5e5be000 (cfff)
  get Phys(data[n=1+d000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:5e5cb000
  ph data[0]=0:5e5be000 (dfff)
  get Phys(data[n=1+e000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:5e5cc000
  ph data[0]=0:5e5be000 (efff)
  get Phys(data[n=1+f000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:5e5cd000
  set TERM
  ph data[0]=0:5e5be000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64ca720, CDB 0xb64ca750, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=4
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903d2b0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903d2b0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:5e5ce000
  ph data[0]=0:5e5ce000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:5e5cf000
  ph data[0]=0:5e5ce000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:5e5d0000
  ph data[0]=0:5e5ce000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:5e5d1000
  ph data[0]=0:5e5ce000 (3fff)
  get Phys(data[n=1+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:5e5d2000
  ph data[0]=0:5e5ce000 (4fff)
  get Phys(data[n=1+5000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:5e5d3000
  ph data[0]=0:5e5ce000 (5fff)
  get Phys(data[n=1+6000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:5e5d4000
  ph data[0]=0:5e5ce000 (6fff)
  get Phys(data[n=1+7000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:5e5d5000
  ph data[0]=0:5e5ce000 (7fff)
  get Phys(data[n=1+8000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:5e5d6000
  ph data[0]=0:5e5ce000 (8fff)
  get Phys(data[n=1+9000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:5e5d7000
  ph data[0]=0:5e5ce000 (9fff)
  get Phys(data[n=1+a000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:5e5d8000
  ph data[0]=0:5e5ce000 (afff)
  get Phys(data[n=1+b000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:5e5d9000
  ph data[0]=0:5e5ce000 (bfff)
  get Phys(data[n=1+c000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:5e5da000
  ph data[0]=0:5e5ce000 (cfff)
  get Phys(data[n=1+d000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:5e5db000
  ph data[0]=0:5e5ce000 (dfff)
  get Phys(data[n=1+e000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:5e5dc000
  ph data[0]=0:5e5ce000 (efff)
  get Phys(data[n=1+f000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:5e5dd000
  set TERM
  ph data[0]=0:5e5ce000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 5 request(s)!
AtapiStartIo: next Srb b64ca720
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8500, WordsLeft 8500
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10a00, full size 10a00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=4
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903d130, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903d1b0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903d230, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb64ca720
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb64ca720, CDB 0xb64ca750, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903d2b0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x1, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b64ca720
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb64ca720, status 1
AtapiInterrupt: RequestComplete, srb 0xb64ca720
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903d330, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903d330, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:5c08e000
  ph data[0]=0:5c08e000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:5c08f000
  ph data[0]=0:5c08e000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:5c090000
  ph data[0]=0:5c08e000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:5c091000
  ph data[0]=0:5c08e000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:5c092000
  ph data[0]=0:5c08e000 (4fff)
  get Phys(data[n=1+5000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:5c093000
  ph data[0]=0:5c08e000 (5fff)
  get Phys(data[n=1+6000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:5c08c000
  ph data[1]=0:5c08c000 (fff)
  get Phys(data[n=2+1000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:5c08d000
  ph data[1]=0:5c08c000 (1fff)
  get Phys(data[n=2+2000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:5c096000
  ph data[2]=0:5c096000 (fff)
  get Phys(data[n=3+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:5c097000
  ph data[2]=0:5c096000 (1fff)
  get Phys(data[n=3+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:5c098000
  ph data[2]=0:5c096000 (2fff)
  get Phys(data[n=3+3000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:5c099000
  ph data[2]=0:5c096000 (3fff)
  get Phys(data[n=3+4000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:5c09a000
  ph data[2]=0:5c096000 (4fff)
  get Phys(data[n=3+5000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:5c09b000
  ph data[2]=0:5c096000 (5fff)
  get Phys(data[n=3+6000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:5c094000
  ph data[3]=0:5c094000 (fff)
  get Phys(data[n=4+1000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:5c095000
  set TERM
  ph data[3]=0:5c094000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903d330, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903d3b0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903d3b0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:5c09e000
  ph data[0]=0:5c09e000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:5c09f000
  ph data[0]=0:5c09e000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:5c0a0000
  ph data[0]=0:5c09e000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:5c0a1000
  ph data[0]=0:5c09e000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:5c0a2000
  ph data[0]=0:5c09e000 (4fff)
  get Phys(data[n=1+5000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:5c0a3000
  ph data[0]=0:5c09e000 (5fff)
  get Phys(data[n=1+6000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:5c09c000
  ph data[1]=0:5c09c000 (fff)
  get Phys(data[n=2+1000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:5c09d000
  ph data[1]=0:5c09c000 (1fff)
  get Phys(data[n=2+2000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:5c0a6000
  ph data[2]=0:5c0a6000 (fff)
  get Phys(data[n=3+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:5c0a7000
  ph data[2]=0:5c0a6000 (1fff)
  get Phys(data[n=3+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:5c0a8000
  ph data[2]=0:5c0a6000 (2fff)
  get Phys(data[n=3+3000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:5c0a9000
  ph data[2]=0:5c0a6000 (3fff)
  get Phys(data[n=3+4000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:5c0aa000
  ph data[2]=0:5c0a6000 (4fff)
  get Phys(data[n=3+5000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:5c0ab000
  ph data[2]=0:5c0a6000 (5fff)
  get Phys(data[n=3+6000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:5c0a4000
  ph data[3]=0:5c0a4000 (fff)
  get Phys(data[n=4+1000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:5c0a5000
  set TERM
  ph data[3]=0:5c0a4000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903d430, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903d430, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:5c0ae000
  ph data[0]=0:5c0ae000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:5c0af000
  ph data[0]=0:5c0ae000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:5c0b0000
  ph data[0]=0:5c0ae000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:5c0b1000
  ph data[0]=0:5c0ae000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:5c0b2000
  ph data[0]=0:5c0ae000 (4fff)
  get Phys(data[n=1+5000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:5c0b3000
  ph data[0]=0:5c0ae000 (5fff)
  get Phys(data[n=1+6000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:5c0ac000
  ph data[1]=0:5c0ac000 (fff)
  get Phys(data[n=2+1000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:5c0ad000
  ph data[1]=0:5c0ac000 (1fff)
  get Phys(data[n=2+2000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:5c0b6000
  ph data[2]=0:5c0b6000 (fff)
  get Phys(data[n=3+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:5c0b7000
  ph data[2]=0:5c0b6000 (1fff)
  get Phys(data[n=3+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:5c0b8000
  ph data[2]=0:5c0b6000 (2fff)
  get Phys(data[n=3+3000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:5c0b9000
  ph data[2]=0:5c0b6000 (3fff)
  get Phys(data[n=3+4000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:5c0ba000
  ph data[2]=0:5c0b6000 (4fff)
  get Phys(data[n=3+5000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:5c0bb000
  ph data[2]=0:5c0b6000 (5fff)
  get Phys(data[n=3+6000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:5c0b4000
  ph data[3]=0:5c0b4000 (fff)
  get Phys(data[n=4+1000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:5c0b5000
  set TERM
  ph data[3]=0:5c0b4000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903d4b0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903d4b0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:5c0be000
  ph data[0]=0:5c0be000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:5c0bf000
  ph data[0]=0:5c0be000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:5c0c0000
  ph data[0]=0:5c0be000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:5c0c1000
  ph data[0]=0:5c0be000 (3fff)
  get Phys(data[n=1+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:5c0c2000
  ph data[0]=0:5c0be000 (4fff)
  get Phys(data[n=1+5000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:5c0c3000
  ph data[0]=0:5c0be000 (5fff)
  get Phys(data[n=1+6000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:5c0bc000
  ph data[1]=0:5c0bc000 (fff)
  get Phys(data[n=2+1000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:5c0bd000
  ph data[1]=0:5c0bc000 (1fff)
  get Phys(data[n=2+2000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:5c0c6000
  ph data[2]=0:5c0c6000 (fff)
  get Phys(data[n=3+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:5c0c7000
  ph data[2]=0:5c0c6000 (1fff)
  get Phys(data[n=3+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:5c0c8000
  ph data[2]=0:5c0c6000 (2fff)
  get Phys(data[n=3+3000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:5c0c9000
  ph data[2]=0:5c0c6000 (3fff)
  get Phys(data[n=3+4000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:5c0ca000
  ph data[2]=0:5c0c6000 (4fff)
  get Phys(data[n=3+5000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:5c0cb000
  ph data[2]=0:5c0c6000 (5fff)
  get Phys(data[n=3+6000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:5c0c4000
  ph data[3]=0:5c0c4000 (fff)
  get Phys(data[n=4+1000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:5c0c5000
  set TERM
  ph data[3]=0:5c0c4000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520988
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903d3b0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903d430, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903d4b0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b7c
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903d530, OrigWordsRequested 0x6900, DevSize 0x69
IdeReadWrite (REQ): Starting sector is 3903d530, Number of WORDS 0x6900, DevSize 0x69
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f74f2000, count d200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:5bdb6000
  ph data[0]=0:5bdb6000 (fff)
  get Phys(data[n=1+1000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:5bdaf000
  ph data[1]=0:5bdaf000 (fff)
  get Phys(data[n=2+1000]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:5bdb0000
  ph data[1]=0:5bdaf000 (1fff)
  get Phys(data[n=2+2000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:5bdb1000
  ph data[1]=0:5bdaf000 (2fff)
  get Phys(data[n=2+3000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:5bdb2000
  ph data[1]=0:5bdaf000 (3fff)
  get Phys(data[n=2+4000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:5bdb3000
  ph data[1]=0:5bdaf000 (4fff)
  get Phys(data[n=2+5000]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:5bdb4000
  ph data[1]=0:5bdaf000 (5fff)
  get Phys(data[n=2+6000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:5bdb5000
  ph data[1]=0:5bdaf000 (6fff)
  get Phys(data[n=2+7000]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:5bdbe000
  ph data[2]=0:5bdbe000 (fff)
  get Phys(data[n=3+1000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:5bdb7000
  ph data[3]=0:5bdb7000 (fff)
  get Phys(data[n=4+1000]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:5bdb8000
  ph data[3]=0:5bdb7000 (1fff)
  get Phys(data[n=4+2000]=f74fd000)
AtapiVirtToPhysAddr_: f74fd000 -> 00000000:5bdb9000
  ph data[3]=0:5bdb7000 (2fff)
  get Phys(data[n=4+3000]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:5bdba000
  ph data[3]=0:5bdb7000 (3fff)
  get Phys(data[n=4+4000]=f74ff000)
AtapiVirtToPhysAddr_: f74ff000 -> 00000000:5bdbb000
  set TERM
  ph data[3]=0:5bdb7000 (41ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903d530, Count 0x69(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 6900, WordsLeft 6900
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered d200, full size d200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903d5a0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903d5a0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:5bd3f000
  ph data[0]=0:5bd3f000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:5bd40000
  ph data[0]=0:5bd3f000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:5bd41000
  ph data[0]=0:5bd3f000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:5bd42000
  ph data[0]=0:5bd3f000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:5bd3b000
  ph data[1]=0:5bd3b000 (fff)
  get Phys(data[n=2+1000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:5bd3c000
  ph data[1]=0:5bd3b000 (1fff)
  get Phys(data[n=2+2000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:5bd3d000
  ph data[1]=0:5bd3b000 (2fff)
  get Phys(data[n=2+3000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:5bd3e000
  ph data[1]=0:5bd3b000 (3fff)
  get Phys(data[n=2+4000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:5bd47000
  ph data[2]=0:5bd47000 (fff)
  get Phys(data[n=3+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:5bd48000
  ph data[2]=0:5bd47000 (1fff)
  get Phys(data[n=3+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:5bd49000
  ph data[2]=0:5bd47000 (2fff)
  get Phys(data[n=3+3000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:5bd4a000
  ph data[2]=0:5bd47000 (3fff)
  get Phys(data[n=3+4000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:5bd43000
  ph data[3]=0:5bd43000 (fff)
  get Phys(data[n=4+1000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:5bd44000
  ph data[3]=0:5bd43000 (1fff)
  get Phys(data[n=4+2000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:5bd45000
  ph data[3]=0:5bd43000 (2fff)
  get Phys(data[n=4+3000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:5bd46000
  set TERM
  ph data[3]=0:5bd43000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903d5a0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903d620, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903d620, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:5bd4f000
  ph data[0]=0:5bd4f000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:5bd50000
  ph data[0]=0:5bd4f000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:5bd51000
  ph data[0]=0:5bd4f000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:5bd52000
  ph data[0]=0:5bd4f000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:5bd4b000
  ph data[1]=0:5bd4b000 (fff)
  get Phys(data[n=2+1000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:5bd4c000
  ph data[1]=0:5bd4b000 (1fff)
  get Phys(data[n=2+2000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:5bd4d000
  ph data[1]=0:5bd4b000 (2fff)
  get Phys(data[n=2+3000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:5bd4e000
  ph data[1]=0:5bd4b000 (3fff)
  get Phys(data[n=2+4000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:5bd57000
  ph data[2]=0:5bd57000 (fff)
  get Phys(data[n=3+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:5bd58000
  ph data[2]=0:5bd57000 (1fff)
  get Phys(data[n=3+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:5bd59000
  ph data[2]=0:5bd57000 (2fff)
  get Phys(data[n=3+3000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:5bd5a000
  ph data[2]=0:5bd57000 (3fff)
  get Phys(data[n=3+4000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:5bd53000
  ph data[3]=0:5bd53000 (fff)
  get Phys(data[n=4+1000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:5bd54000
  ph data[3]=0:5bd53000 (1fff)
  get Phys(data[n=4+2000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:5bd55000
  ph data[3]=0:5bd53000 (2fff)
  get Phys(data[n=4+3000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:5bd56000
  set TERM
  ph data[3]=0:5bd53000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903d6a0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903d6a0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:5bd5f000
  ph data[0]=0:5bd5f000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:5bd60000
  ph data[0]=0:5bd5f000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:5bd61000
  ph data[0]=0:5bd5f000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:5bd62000
  ph data[0]=0:5bd5f000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:5bd5b000
  ph data[1]=0:5bd5b000 (fff)
  get Phys(data[n=2+1000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:5bd5c000
  ph data[1]=0:5bd5b000 (1fff)
  get Phys(data[n=2+2000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:5bd5d000
  ph data[1]=0:5bd5b000 (2fff)
  get Phys(data[n=2+3000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:5bd5e000
  ph data[1]=0:5bd5b000 (3fff)
  get Phys(data[n=2+4000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:5bd67000
  ph data[2]=0:5bd67000 (fff)
  get Phys(data[n=3+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:5bd68000
  ph data[2]=0:5bd67000 (1fff)
  get Phys(data[n=3+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:5bd69000
  ph data[2]=0:5bd67000 (2fff)
  get Phys(data[n=3+3000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:5bd6a000
  ph data[2]=0:5bd67000 (3fff)
  get Phys(data[n=3+4000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:5bd63000
  ph data[3]=0:5bd63000 (fff)
  get Phys(data[n=4+1000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:5bd64000
  ph data[3]=0:5bd63000 (1fff)
  get Phys(data[n=4+2000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:5bd65000
  ph data[3]=0:5bd63000 (2fff)
  get Phys(data[n=4+3000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:5bd66000
  set TERM
  ph data[3]=0:5bd63000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903d720, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903d720, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:5bd6f000
  ph data[0]=0:5bd6f000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:5bd70000
  ph data[0]=0:5bd6f000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:5bd71000
  ph data[0]=0:5bd6f000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:5bd72000
  ph data[0]=0:5bd6f000 (3fff)
  get Phys(data[n=1+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:5bd6b000
  ph data[1]=0:5bd6b000 (fff)
  get Phys(data[n=2+1000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:5bd6c000
  ph data[1]=0:5bd6b000 (1fff)
  get Phys(data[n=2+2000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:5bd6d000
  ph data[1]=0:5bd6b000 (2fff)
  get Phys(data[n=2+3000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:5bd6e000
  ph data[1]=0:5bd6b000 (3fff)
  get Phys(data[n=2+4000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:5bd77000
  ph data[2]=0:5bd77000 (fff)
  get Phys(data[n=3+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:5bd78000
  ph data[2]=0:5bd77000 (1fff)
  get Phys(data[n=3+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:5bd79000
  ph data[2]=0:5bd77000 (2fff)
  get Phys(data[n=3+3000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:5bd7a000
  ph data[2]=0:5bd77000 (3fff)
  get Phys(data[n=3+4000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:5bd73000
  ph data[3]=0:5bd73000 (fff)
  get Phys(data[n=4+1000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:5bd74000
  ph data[3]=0:5bd73000 (1fff)
  get Phys(data[n=4+2000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:5bd75000
  ph data[3]=0:5bd73000 (2fff)
  get Phys(data[n=4+3000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:5bd76000
  set TERM
  ph data[3]=0:5bd73000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903d620, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903d6a0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903d720, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903d9a0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903d9a0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7067000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:5b937000
  ph data[0]=0:5b937000 (fff)
  get Phys(data[n=1+1000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:5b938000
  ph data[0]=0:5b937000 (1fff)
  get Phys(data[n=1+2000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:5b939000
  ph data[0]=0:5b937000 (2fff)
  get Phys(data[n=1+3000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:5b93a000
  ph data[0]=0:5b937000 (3fff)
  get Phys(data[n=1+4000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:5b93b000
  ph data[0]=0:5b937000 (4fff)
  get Phys(data[n=1+5000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:5b93c000
  ph data[0]=0:5b937000 (5fff)
  get Phys(data[n=1+6000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:5b935000
  ph data[1]=0:5b935000 (fff)
  get Phys(data[n=2+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:5b936000
  ph data[1]=0:5b935000 (1fff)
  get Phys(data[n=2+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:5b93f000
  ph data[2]=0:5b93f000 (fff)
  get Phys(data[n=3+1000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:5b940000
  ph data[2]=0:5b93f000 (1fff)
  get Phys(data[n=3+2000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:5b941000
  ph data[2]=0:5b93f000 (2fff)
  get Phys(data[n=3+3000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:5b942000
  ph data[2]=0:5b93f000 (3fff)
  get Phys(data[n=3+4000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:5b943000
  ph data[2]=0:5b93f000 (4fff)
  get Phys(data[n=3+5000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:5b944000
  ph data[2]=0:5b93f000 (5fff)
  get Phys(data[n=3+6000]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:5b93d000
  ph data[3]=0:5b93d000 (fff)
  get Phys(data[n=4+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:5b93e000
  set TERM
  ph data[3]=0:5b93d000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903d9a0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903da20, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903da20, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7077000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:5b947000
  ph data[0]=0:5b947000 (fff)
  get Phys(data[n=1+1000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:5b948000
  ph data[0]=0:5b947000 (1fff)
  get Phys(data[n=1+2000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:5b949000
  ph data[0]=0:5b947000 (2fff)
  get Phys(data[n=1+3000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:5b94a000
  ph data[0]=0:5b947000 (3fff)
  get Phys(data[n=1+4000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:5b94b000
  ph data[0]=0:5b947000 (4fff)
  get Phys(data[n=1+5000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:5b94c000
  ph data[0]=0:5b947000 (5fff)
  get Phys(data[n=1+6000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:5b945000
  ph data[1]=0:5b945000 (fff)
  get Phys(data[n=2+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:5b946000
  ph data[1]=0:5b945000 (1fff)
  get Phys(data[n=2+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:5b94f000
  ph data[2]=0:5b94f000 (fff)
  get Phys(data[n=3+1000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:5b950000
  ph data[2]=0:5b94f000 (1fff)
  get Phys(data[n=3+2000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:5b951000
  ph data[2]=0:5b94f000 (2fff)
  get Phys(data[n=3+3000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:5b952000
  ph data[2]=0:5b94f000 (3fff)
  get Phys(data[n=3+4000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:5b953000
  ph data[2]=0:5b94f000 (4fff)
  get Phys(data[n=3+5000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:5b954000
  ph data[2]=0:5b94f000 (5fff)
  get Phys(data[n=3+6000]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:5b94d000
  ph data[3]=0:5b94d000 (fff)
  get Phys(data[n=4+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:5b94e000
  set TERM
  ph data[3]=0:5b94d000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903daa0, OrigWordsRequested 0x6300, DevSize 0x63
IdeReadWrite (REQ): Starting sector is 3903daa0, Number of WORDS 0x6300, DevSize 0x63
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7087000, count c600, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:5b957000
  ph data[0]=0:5b957000 (fff)
  get Phys(data[n=1+1000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:5b958000
  ph data[0]=0:5b957000 (1fff)
  get Phys(data[n=1+2000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:5b959000
  ph data[0]=0:5b957000 (2fff)
  get Phys(data[n=1+3000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:5b95a000
  ph data[0]=0:5b957000 (3fff)
  get Phys(data[n=1+4000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:5b95b000
  ph data[0]=0:5b957000 (4fff)
  get Phys(data[n=1+5000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:5b95c000
  ph data[0]=0:5b957000 (5fff)
  get Phys(data[n=1+6000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:5b955000
  ph data[1]=0:5b955000 (fff)
  get Phys(data[n=2+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:5b956000
  ph data[1]=0:5b955000 (1fff)
  get Phys(data[n=2+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:5b95f000
  ph data[2]=0:5b95f000 (fff)
  get Phys(data[n=3+1000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:5b960000
  ph data[2]=0:5b95f000 (1fff)
  get Phys(data[n=3+2000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:5b961000
  ph data[2]=0:5b95f000 (2fff)
  get Phys(data[n=3+3000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:5b962000
  ph data[2]=0:5b95f000 (3fff)
  get Phys(data[n=3+4000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:5b963000
  set TERM
  ph data[2]=0:5b95f000 (45ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903da20, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903daa0, Count 0x63(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x3, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 6300, WordsLeft 6300
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered c600, full size c600
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903db10, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903db10, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:5b041000
  ph data[0]=0:5b041000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:5b042000
  ph data[0]=0:5b041000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:5b03b000
  ph data[1]=0:5b03b000 (fff)
  get Phys(data[n=2+1000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:5b03c000
  ph data[1]=0:5b03b000 (1fff)
  get Phys(data[n=2+2000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:5b03d000
  ph data[1]=0:5b03b000 (2fff)
  get Phys(data[n=2+3000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:5b03e000
  ph data[1]=0:5b03b000 (3fff)
  get Phys(data[n=2+4000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:5b03f000
  ph data[1]=0:5b03b000 (4fff)
  get Phys(data[n=2+5000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:5b040000
  ph data[1]=0:5b03b000 (5fff)
  get Phys(data[n=2+6000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:5b049000
  ph data[2]=0:5b049000 (fff)
  get Phys(data[n=3+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:5b04a000
  ph data[2]=0:5b049000 (1fff)
  get Phys(data[n=3+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:5b043000
  ph data[3]=0:5b043000 (fff)
  get Phys(data[n=4+1000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:5b044000
  ph data[3]=0:5b043000 (1fff)
  get Phys(data[n=4+2000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:5b045000
  ph data[3]=0:5b043000 (2fff)
  get Phys(data[n=4+3000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:5b046000
  ph data[3]=0:5b043000 (3fff)
  get Phys(data[n=4+4000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:5b047000
  ph data[3]=0:5b043000 (4fff)
  get Phys(data[n=4+5000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:5b048000
  set TERM
  ph data[3]=0:5b043000 (5fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903db10, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903db90, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903db90, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:5b051000
  ph data[0]=0:5b051000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:5b052000
  ph data[0]=0:5b051000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:5b04b000
  ph data[1]=0:5b04b000 (fff)
  get Phys(data[n=2+1000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:5b04c000
  ph data[1]=0:5b04b000 (1fff)
  get Phys(data[n=2+2000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:5b04d000
  ph data[1]=0:5b04b000 (2fff)
  get Phys(data[n=2+3000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:5b04e000
  ph data[1]=0:5b04b000 (3fff)
  get Phys(data[n=2+4000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:5b04f000
  ph data[1]=0:5b04b000 (4fff)
  get Phys(data[n=2+5000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:5b050000
  ph data[1]=0:5b04b000 (5fff)
  get Phys(data[n=2+6000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:5b059000
  ph data[2]=0:5b059000 (fff)
  get Phys(data[n=3+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:5b05a000
  ph data[2]=0:5b059000 (1fff)
  get Phys(data[n=3+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:5b053000
  ph data[3]=0:5b053000 (fff)
  get Phys(data[n=4+1000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:5b054000
  ph data[3]=0:5b053000 (1fff)
  get Phys(data[n=4+2000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:5b055000
  ph data[3]=0:5b053000 (2fff)
  get Phys(data[n=4+3000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:5b056000
  ph data[3]=0:5b053000 (3fff)
  get Phys(data[n=4+4000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:5b057000
  ph data[3]=0:5b053000 (4fff)
  get Phys(data[n=4+5000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:5b058000
  set TERM
  ph data[3]=0:5b053000 (5fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903dc10, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903dc10, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:5b061000
  ph data[0]=0:5b061000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:5b062000
  ph data[0]=0:5b061000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:5b05b000
  ph data[1]=0:5b05b000 (fff)
  get Phys(data[n=2+1000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:5b05c000
  ph data[1]=0:5b05b000 (1fff)
  get Phys(data[n=2+2000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:5b05d000
  ph data[1]=0:5b05b000 (2fff)
  get Phys(data[n=2+3000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:5b05e000
  ph data[1]=0:5b05b000 (3fff)
  get Phys(data[n=2+4000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:5b05f000
  ph data[1]=0:5b05b000 (4fff)
  get Phys(data[n=2+5000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:5b060000
  ph data[1]=0:5b05b000 (5fff)
  get Phys(data[n=2+6000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:5b069000
  ph data[2]=0:5b069000 (fff)
  get Phys(data[n=3+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:5b06a000
  ph data[2]=0:5b069000 (1fff)
  get Phys(data[n=3+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:5b063000
  ph data[3]=0:5b063000 (fff)
  get Phys(data[n=4+1000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:5b064000
  ph data[3]=0:5b063000 (1fff)
  get Phys(data[n=4+2000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:5b065000
  ph data[3]=0:5b063000 (2fff)
  get Phys(data[n=4+3000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:5b066000
  ph data[3]=0:5b063000 (3fff)
  get Phys(data[n=4+4000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:5b067000
  ph data[3]=0:5b063000 (4fff)
  get Phys(data[n=4+5000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:5b068000
  set TERM
  ph data[3]=0:5b063000 (5fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903db90, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903dc90, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903dc90, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:5b071000
  ph data[0]=0:5b071000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:5b072000
  ph data[0]=0:5b071000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:5b06b000
  ph data[1]=0:5b06b000 (fff)
  get Phys(data[n=2+1000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:5b06c000
  ph data[1]=0:5b06b000 (1fff)
  get Phys(data[n=2+2000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:5b06d000
  ph data[1]=0:5b06b000 (2fff)
  get Phys(data[n=2+3000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:5b06e000
  ph data[1]=0:5b06b000 (3fff)
  get Phys(data[n=2+4000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:5b06f000
  ph data[1]=0:5b06b000 (4fff)
  get Phys(data[n=2+5000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:5b070000
  ph data[1]=0:5b06b000 (5fff)
  get Phys(data[n=2+6000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:5b079000
  ph data[2]=0:5b079000 (fff)
  get Phys(data[n=3+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:5b07a000
  ph data[2]=0:5b079000 (1fff)
  get Phys(data[n=3+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:5b073000
  ph data[3]=0:5b073000 (fff)
  get Phys(data[n=4+1000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:5b074000
  ph data[3]=0:5b073000 (1fff)
  get Phys(data[n=4+2000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:5b075000
  ph data[3]=0:5b073000 (2fff)
  get Phys(data[n=4+3000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:5b076000
  ph data[3]=0:5b073000 (3fff)
  get Phys(data[n=4+4000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:5b077000
  ph data[3]=0:5b073000 (4fff)
  get Phys(data[n=4+5000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:5b078000
  set TERM
  ph data[3]=0:5b073000 (5fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903dc10, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903dc90, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903dd10, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903dd10, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:5ae11000
  ph data[0]=0:5ae11000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:5ae0a000
  ph data[1]=0:5ae0a000 (fff)
  get Phys(data[n=2+1000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:5ae0b000
  ph data[1]=0:5ae0a000 (1fff)
  get Phys(data[n=2+2000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:5ae0c000
  ph data[1]=0:5ae0a000 (2fff)
  get Phys(data[n=2+3000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:5ae0d000
  ph data[1]=0:5ae0a000 (3fff)
  get Phys(data[n=2+4000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:5ae0e000
  ph data[1]=0:5ae0a000 (4fff)
  get Phys(data[n=2+5000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:5ae0f000
  ph data[1]=0:5ae0a000 (5fff)
  get Phys(data[n=2+6000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:5ae10000
  ph data[1]=0:5ae0a000 (6fff)
  get Phys(data[n=2+7000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:5ae19000
  ph data[2]=0:5ae19000 (fff)
  get Phys(data[n=3+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:5ae12000
  ph data[3]=0:5ae12000 (fff)
  get Phys(data[n=4+1000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:5ae13000
  ph data[3]=0:5ae12000 (1fff)
  get Phys(data[n=4+2000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:5ae14000
  ph data[3]=0:5ae12000 (2fff)
  get Phys(data[n=4+3000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:5ae15000
  ph data[3]=0:5ae12000 (3fff)
  get Phys(data[n=4+4000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:5ae16000
  ph data[3]=0:5ae12000 (4fff)
  get Phys(data[n=4+5000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:5ae17000
  ph data[3]=0:5ae12000 (5fff)
  get Phys(data[n=4+6000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:5ae18000
  set TERM
  ph data[3]=0:5ae12000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903dd10, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903dd90, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903dd90, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:5ae21000
  ph data[0]=0:5ae21000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:5ae1a000
  ph data[1]=0:5ae1a000 (fff)
  get Phys(data[n=2+1000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:5ae1b000
  ph data[1]=0:5ae1a000 (1fff)
  get Phys(data[n=2+2000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:5ae1c000
  ph data[1]=0:5ae1a000 (2fff)
  get Phys(data[n=2+3000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:5ae1d000
  ph data[1]=0:5ae1a000 (3fff)
  get Phys(data[n=2+4000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:5ae1e000
  ph data[1]=0:5ae1a000 (4fff)
  get Phys(data[n=2+5000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:5ae1f000
  ph data[1]=0:5ae1a000 (5fff)
  get Phys(data[n=2+6000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:5ae20000
  ph data[1]=0:5ae1a000 (6fff)
  get Phys(data[n=2+7000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:5ae29000
  ph data[2]=0:5ae29000 (fff)
  get Phys(data[n=3+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:5ae22000
  ph data[3]=0:5ae22000 (fff)
  get Phys(data[n=4+1000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:5ae23000
  ph data[3]=0:5ae22000 (1fff)
  get Phys(data[n=4+2000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:5ae24000
  ph data[3]=0:5ae22000 (2fff)
  get Phys(data[n=4+3000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:5ae25000
  ph data[3]=0:5ae22000 (3fff)
  get Phys(data[n=4+4000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:5ae26000
  ph data[3]=0:5ae22000 (4fff)
  get Phys(data[n=4+5000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:5ae27000
  ph data[3]=0:5ae22000 (5fff)
  get Phys(data[n=4+6000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:5ae28000
  set TERM
  ph data[3]=0:5ae22000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903de10, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903de10, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:5ae31000
  ph data[0]=0:5ae31000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:5ae2a000
  ph data[1]=0:5ae2a000 (fff)
  get Phys(data[n=2+1000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:5ae2b000
  ph data[1]=0:5ae2a000 (1fff)
  get Phys(data[n=2+2000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:5ae2c000
  ph data[1]=0:5ae2a000 (2fff)
  get Phys(data[n=2+3000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:5ae2d000
  ph data[1]=0:5ae2a000 (3fff)
  get Phys(data[n=2+4000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:5ae2e000
  ph data[1]=0:5ae2a000 (4fff)
  get Phys(data[n=2+5000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:5ae2f000
  ph data[1]=0:5ae2a000 (5fff)
  get Phys(data[n=2+6000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:5ae30000
  ph data[1]=0:5ae2a000 (6fff)
  get Phys(data[n=2+7000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:5ae39000
  ph data[2]=0:5ae39000 (fff)
  get Phys(data[n=3+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:5ae32000
  ph data[3]=0:5ae32000 (fff)
  get Phys(data[n=4+1000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:5ae33000
  ph data[3]=0:5ae32000 (1fff)
  get Phys(data[n=4+2000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:5ae34000
  ph data[3]=0:5ae32000 (2fff)
  get Phys(data[n=4+3000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:5ae35000
  ph data[3]=0:5ae32000 (3fff)
  get Phys(data[n=4+4000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:5ae36000
  ph data[3]=0:5ae32000 (4fff)
  get Phys(data[n=4+5000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:5ae37000
  ph data[3]=0:5ae32000 (5fff)
  get Phys(data[n=4+6000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:5ae38000
  set TERM
  ph data[3]=0:5ae32000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520988
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903dd90, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903de90, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903de90, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:5ae41000
  ph data[0]=0:5ae41000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:5ae3a000
  ph data[1]=0:5ae3a000 (fff)
  get Phys(data[n=2+1000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:5ae3b000
  ph data[1]=0:5ae3a000 (1fff)
  get Phys(data[n=2+2000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:5ae3c000
  ph data[1]=0:5ae3a000 (2fff)
  get Phys(data[n=2+3000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:5ae3d000
  ph data[1]=0:5ae3a000 (3fff)
  get Phys(data[n=2+4000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:5ae3e000
  ph data[1]=0:5ae3a000 (4fff)
  get Phys(data[n=2+5000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:5ae3f000
  ph data[1]=0:5ae3a000 (5fff)
  get Phys(data[n=2+6000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:5ae40000
  ph data[1]=0:5ae3a000 (6fff)
  get Phys(data[n=2+7000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:5ae49000
  ph data[2]=0:5ae49000 (fff)
  get Phys(data[n=3+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:5ae42000
  ph data[3]=0:5ae42000 (fff)
  get Phys(data[n=4+1000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:5ae43000
  ph data[3]=0:5ae42000 (1fff)
  get Phys(data[n=4+2000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:5ae44000
  ph data[3]=0:5ae42000 (2fff)
  get Phys(data[n=4+3000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:5ae45000
  ph data[3]=0:5ae42000 (3fff)
  get Phys(data[n=4+4000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:5ae46000
  ph data[3]=0:5ae42000 (4fff)
  get Phys(data[n=4+5000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:5ae47000
  ph data[3]=0:5ae42000 (5fff)
  get Phys(data[n=4+6000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:5ae48000
  set TERM
  ph data[3]=0:5ae42000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903de10, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903de90, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b2c
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903df10, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903df10, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f74e2000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f74e2000)
AtapiVirtToPhysAddr_: f74e2000 -> 00000000:5a971000
  ph data[0]=0:5a971000 (fff)
  get Phys(data[n=1+1000]=f74e3000)
AtapiVirtToPhysAddr_: f74e3000 -> 00000000:5a96a000
  ph data[1]=0:5a96a000 (fff)
  get Phys(data[n=2+1000]=f74e4000)
AtapiVirtToPhysAddr_: f74e4000 -> 00000000:5a96b000
  ph data[1]=0:5a96a000 (1fff)
  get Phys(data[n=2+2000]=f74e5000)
AtapiVirtToPhysAddr_: f74e5000 -> 00000000:5a96c000
  ph data[1]=0:5a96a000 (2fff)
  get Phys(data[n=2+3000]=f74e6000)
AtapiVirtToPhysAddr_: f74e6000 -> 00000000:5a96d000
  ph data[1]=0:5a96a000 (3fff)
  get Phys(data[n=2+4000]=f74e7000)
AtapiVirtToPhysAddr_: f74e7000 -> 00000000:5a96e000
  ph data[1]=0:5a96a000 (4fff)
  get Phys(data[n=2+5000]=f74e8000)
AtapiVirtToPhysAddr_: f74e8000 -> 00000000:5a96f000
  ph data[1]=0:5a96a000 (5fff)
  get Phys(data[n=2+6000]=f74e9000)
AtapiVirtToPhysAddr_: f74e9000 -> 00000000:5a970000
  ph data[1]=0:5a96a000 (6fff)
  get Phys(data[n=2+7000]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:5a979000
  ph data[2]=0:5a979000 (fff)
  get Phys(data[n=3+1000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:5a972000
  ph data[3]=0:5a972000 (fff)
  get Phys(data[n=4+1000]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:5a973000
  ph data[3]=0:5a972000 (1fff)
  get Phys(data[n=4+2000]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:5a974000
  ph data[3]=0:5a972000 (2fff)
  get Phys(data[n=4+3000]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:5a975000
  ph data[3]=0:5a972000 (3fff)
  get Phys(data[n=4+4000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:5a976000
  ph data[3]=0:5a972000 (4fff)
  get Phys(data[n=4+5000]=f74f0000)
AtapiVirtToPhysAddr_: f74f0000 -> 00000000:5a977000
  ph data[3]=0:5a972000 (5fff)
  get Phys(data[n=4+6000]=f74f1000)
AtapiVirtToPhysAddr_: f74f1000 -> 00000000:5a978000
  set TERM
  ph data[3]=0:5a972000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903df10, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b2c
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903df90, OrigWordsRequested 0x6900, DevSize 0x69
IdeReadWrite (REQ): Starting sector is 3903df90, Number of WORDS 0x6900, DevSize 0x69
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f74f2000, count d200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:5a981000
  ph data[0]=0:5a981000 (fff)
  get Phys(data[n=1+1000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:5a97a000
  ph data[1]=0:5a97a000 (fff)
  get Phys(data[n=2+1000]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:5a97b000
  ph data[1]=0:5a97a000 (1fff)
  get Phys(data[n=2+2000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:5a97c000
  ph data[1]=0:5a97a000 (2fff)
  get Phys(data[n=2+3000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:5a97d000
  ph data[1]=0:5a97a000 (3fff)
  get Phys(data[n=2+4000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:5a97e000
  ph data[1]=0:5a97a000 (4fff)
  get Phys(data[n=2+5000]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:5a97f000
  ph data[1]=0:5a97a000 (5fff)
  get Phys(data[n=2+6000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:5a980000
  ph data[1]=0:5a97a000 (6fff)
  get Phys(data[n=2+7000]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:5a989000
  ph data[2]=0:5a989000 (fff)
  get Phys(data[n=3+1000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:5a982000
  ph data[3]=0:5a982000 (fff)
  get Phys(data[n=4+1000]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:5a983000
  ph data[3]=0:5a982000 (1fff)
  get Phys(data[n=4+2000]=f74fd000)
AtapiVirtToPhysAddr_: f74fd000 -> 00000000:5a984000
  ph data[3]=0:5a982000 (2fff)
  get Phys(data[n=4+3000]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:5a985000
  ph data[3]=0:5a982000 (3fff)
  get Phys(data[n=4+4000]=f74ff000)
AtapiVirtToPhysAddr_: f74ff000 -> 00000000:5a986000
  set TERM
  ph data[3]=0:5a982000 (41ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903df90, Count 0x69(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 6900, WordsLeft 6900
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered d200, full size d200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903e000, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903e000, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:5a832000
  ph data[0]=0:5a832000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:5a833000
  ph data[0]=0:5a832000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:5a834000
  ph data[0]=0:5a832000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:5a835000
  ph data[0]=0:5a832000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:5a836000
  ph data[0]=0:5a832000 (4fff)
  get Phys(data[n=1+5000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:5a837000
  ph data[0]=0:5a832000 (5fff)
  get Phys(data[n=1+6000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:5a838000
  ph data[0]=0:5a832000 (6fff)
  get Phys(data[n=1+7000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:5a831000
  ph data[1]=0:5a831000 (fff)
  get Phys(data[n=2+1000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:5a83a000
  ph data[2]=0:5a83a000 (fff)
  get Phys(data[n=3+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:5a83b000
  ph data[2]=0:5a83a000 (1fff)
  get Phys(data[n=3+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:5a83c000
  ph data[2]=0:5a83a000 (2fff)
  get Phys(data[n=3+3000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:5a83d000
  ph data[2]=0:5a83a000 (3fff)
  get Phys(data[n=3+4000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:5a83e000
  ph data[2]=0:5a83a000 (4fff)
  get Phys(data[n=3+5000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:5a83f000
  ph data[2]=0:5a83a000 (5fff)
  get Phys(data[n=3+6000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:5a840000
  ph data[2]=0:5a83a000 (6fff)
  get Phys(data[n=3+7000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:5a839000
  set TERM
  ph data[3]=0:5a839000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903e000, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903e080, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903e080, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:5a842000
  ph data[0]=0:5a842000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:5a843000
  ph data[0]=0:5a842000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:5a844000
  ph data[0]=0:5a842000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:5a845000
  ph data[0]=0:5a842000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:5a846000
  ph data[0]=0:5a842000 (4fff)
  get Phys(data[n=1+5000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:5a847000
  ph data[0]=0:5a842000 (5fff)
  get Phys(data[n=1+6000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:5a848000
  ph data[0]=0:5a842000 (6fff)
  get Phys(data[n=1+7000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:5a841000
  ph data[1]=0:5a841000 (fff)
  get Phys(data[n=2+1000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:5a84a000
  ph data[2]=0:5a84a000 (fff)
  get Phys(data[n=3+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:5a84b000
  ph data[2]=0:5a84a000 (1fff)
  get Phys(data[n=3+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:5a84c000
  ph data[2]=0:5a84a000 (2fff)
  get Phys(data[n=3+3000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:5a84d000
  ph data[2]=0:5a84a000 (3fff)
  get Phys(data[n=3+4000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:5a84e000
  ph data[2]=0:5a84a000 (4fff)
  get Phys(data[n=3+5000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:5a84f000
  ph data[2]=0:5a84a000 (5fff)
  get Phys(data[n=3+6000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:5a850000
  ph data[2]=0:5a84a000 (6fff)
  get Phys(data[n=3+7000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:5a849000
  set TERM
  ph data[3]=0:5a849000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903e100, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903e100, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:5a852000
  ph data[0]=0:5a852000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:5a853000
  ph data[0]=0:5a852000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:5a854000
  ph data[0]=0:5a852000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:5a855000
  ph data[0]=0:5a852000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:5a856000
  ph data[0]=0:5a852000 (4fff)
  get Phys(data[n=1+5000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:5a857000
  ph data[0]=0:5a852000 (5fff)
  get Phys(data[n=1+6000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:5a858000
  ph data[0]=0:5a852000 (6fff)
  get Phys(data[n=1+7000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:5a851000
  ph data[1]=0:5a851000 (fff)
  get Phys(data[n=2+1000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:5a85a000
  ph data[2]=0:5a85a000 (fff)
  get Phys(data[n=3+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:5a85b000
  ph data[2]=0:5a85a000 (1fff)
  get Phys(data[n=3+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:5a85c000
  ph data[2]=0:5a85a000 (2fff)
  get Phys(data[n=3+3000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:5a85d000
  ph data[2]=0:5a85a000 (3fff)
  get Phys(data[n=3+4000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:5a85e000
  ph data[2]=0:5a85a000 (4fff)
  get Phys(data[n=3+5000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:5a85f000
  ph data[2]=0:5a85a000 (5fff)
  get Phys(data[n=3+6000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:5a860000
  ph data[2]=0:5a85a000 (6fff)
  get Phys(data[n=3+7000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:5a859000
  set TERM
  ph data[3]=0:5a859000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903e080, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903e180, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903e180, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:5a862000
  ph data[0]=0:5a862000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:5a863000
  ph data[0]=0:5a862000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:5a864000
  ph data[0]=0:5a862000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:5a865000
  ph data[0]=0:5a862000 (3fff)
  get Phys(data[n=1+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:5a866000
  ph data[0]=0:5a862000 (4fff)
  get Phys(data[n=1+5000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:5a867000
  ph data[0]=0:5a862000 (5fff)
  get Phys(data[n=1+6000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:5a868000
  ph data[0]=0:5a862000 (6fff)
  get Phys(data[n=1+7000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:5a861000
  ph data[1]=0:5a861000 (fff)
  get Phys(data[n=2+1000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:5a86a000
  ph data[2]=0:5a86a000 (fff)
  get Phys(data[n=3+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:5a86b000
  ph data[2]=0:5a86a000 (1fff)
  get Phys(data[n=3+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:5a86c000
  ph data[2]=0:5a86a000 (2fff)
  get Phys(data[n=3+3000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:5a86d000
  ph data[2]=0:5a86a000 (3fff)
  get Phys(data[n=3+4000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:5a86e000
  ph data[2]=0:5a86a000 (4fff)
  get Phys(data[n=3+5000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:5a86f000
  ph data[2]=0:5a86a000 (5fff)
  get Phys(data[n=3+6000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:5a870000
  ph data[2]=0:5a86a000 (6fff)
  get Phys(data[n=3+7000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:5a869000
  set TERM
  ph data[3]=0:5a869000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520bf0
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903e100, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf78019c4
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903e180, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b2c
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903e200, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903e200, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f74e8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f74e8000)
AtapiVirtToPhysAddr_: f74e8000 -> 00000000:5a45a000
  ph data[0]=0:5a45a000 (fff)
  get Phys(data[n=1+1000]=f74e9000)
AtapiVirtToPhysAddr_: f74e9000 -> 00000000:5a45b000
  ph data[0]=0:5a45a000 (1fff)
  get Phys(data[n=1+2000]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:5a454000
  ph data[1]=0:5a454000 (fff)
  get Phys(data[n=2+1000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:5a455000
  ph data[1]=0:5a454000 (1fff)
  get Phys(data[n=2+2000]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:5a456000
  ph data[1]=0:5a454000 (2fff)
  get Phys(data[n=2+3000]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:5a457000
  ph data[1]=0:5a454000 (3fff)
  get Phys(data[n=2+4000]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:5a458000
  ph data[1]=0:5a454000 (4fff)
  get Phys(data[n=2+5000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:5a459000
  ph data[1]=0:5a454000 (5fff)
  get Phys(data[n=2+6000]=f74f0000)
AtapiVirtToPhysAddr_: f74f0000 -> 00000000:5a462000
  ph data[2]=0:5a462000 (fff)
  get Phys(data[n=3+1000]=f74f1000)
AtapiVirtToPhysAddr_: f74f1000 -> 00000000:5a463000
  ph data[2]=0:5a462000 (1fff)
  get Phys(data[n=3+2000]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:5a45c000
  ph data[3]=0:5a45c000 (fff)
  get Phys(data[n=4+1000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:5a45d000
  ph data[3]=0:5a45c000 (1fff)
  get Phys(data[n=4+2000]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:5a45e000
  ph data[3]=0:5a45c000 (2fff)
  get Phys(data[n=4+3000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:5a45f000
  ph data[3]=0:5a45c000 (3fff)
  get Phys(data[n=4+4000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:5a460000
  ph data[3]=0:5a45c000 (4fff)
  get Phys(data[n=4+5000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:5a461000
  set TERM
  ph data[3]=0:5a45c000 (5fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903e200, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b2c
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903e280, OrigWordsRequested 0x3700, DevSize 0x37
IdeReadWrite (REQ): Starting sector is 3903e280, Number of WORDS 0x3700, DevSize 0x37
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f74f8000, count 6e00, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:5a46a000
  ph data[0]=0:5a46a000 (fff)
  get Phys(data[n=1+1000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:5a46b000
  ph data[0]=0:5a46a000 (1fff)
  get Phys(data[n=1+2000]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:5a464000
  ph data[1]=0:5a464000 (fff)
  get Phys(data[n=2+1000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:5a465000
  ph data[1]=0:5a464000 (1fff)
  get Phys(data[n=2+2000]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:5a466000
  ph data[1]=0:5a464000 (2fff)
  get Phys(data[n=2+3000]=f74fd000)
AtapiVirtToPhysAddr_: f74fd000 -> 00000000:5a467000
  ph data[1]=0:5a464000 (3fff)
  get Phys(data[n=2+4000]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:5a468000
  set TERM
  ph data[1]=0:5a464000 (4dff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903e280, Count 0x37(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x2, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 3700, WordsLeft 3700
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 6e00, full size 6e00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903e2c0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903e2c0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:5a3c4000
  ph data[0]=0:5a3c4000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:5a3c5000
  ph data[0]=0:5a3c4000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:5a3c6000
  ph data[0]=0:5a3c4000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:5a3c7000
  ph data[0]=0:5a3c4000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:5a3c8000
  ph data[0]=0:5a3c4000 (4fff)
  get Phys(data[n=1+5000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:5a3c1000
  ph data[1]=0:5a3c1000 (fff)
  get Phys(data[n=2+1000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:5a3c2000
  ph data[1]=0:5a3c1000 (1fff)
  get Phys(data[n=2+2000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:5a3c3000
  ph data[1]=0:5a3c1000 (2fff)
  get Phys(data[n=2+3000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:5a3cc000
  ph data[2]=0:5a3cc000 (fff)
  get Phys(data[n=3+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:5a3cd000
  ph data[2]=0:5a3cc000 (1fff)
  get Phys(data[n=3+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:5a3ce000
  ph data[2]=0:5a3cc000 (2fff)
  get Phys(data[n=3+3000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:5a3cf000
  ph data[2]=0:5a3cc000 (3fff)
  get Phys(data[n=3+4000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:5a3d0000
  ph data[2]=0:5a3cc000 (4fff)
  get Phys(data[n=3+5000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:5a3c9000
  ph data[3]=0:5a3c9000 (fff)
  get Phys(data[n=4+1000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:5a3ca000
  ph data[3]=0:5a3c9000 (1fff)
  get Phys(data[n=4+2000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:5a3cb000
  set TERM
  ph data[3]=0:5a3c9000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903e2c0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903e340, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903e340, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:5a3d4000
  ph data[0]=0:5a3d4000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:5a3d5000
  ph data[0]=0:5a3d4000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:5a3d6000
  ph data[0]=0:5a3d4000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:5a3d7000
  ph data[0]=0:5a3d4000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:5a3d8000
  ph data[0]=0:5a3d4000 (4fff)
  get Phys(data[n=1+5000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:5a3d1000
  ph data[1]=0:5a3d1000 (fff)
  get Phys(data[n=2+1000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:5a3d2000
  ph data[1]=0:5a3d1000 (1fff)
  get Phys(data[n=2+2000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:5a3d3000
  ph data[1]=0:5a3d1000 (2fff)
  get Phys(data[n=2+3000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:5a3dc000
  ph data[2]=0:5a3dc000 (fff)
  get Phys(data[n=3+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:5a3dd000
  ph data[2]=0:5a3dc000 (1fff)
  get Phys(data[n=3+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:5a3de000
  ph data[2]=0:5a3dc000 (2fff)
  get Phys(data[n=3+3000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:5a3df000
  ph data[2]=0:5a3dc000 (3fff)
  get Phys(data[n=3+4000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:5a3e0000
  ph data[2]=0:5a3dc000 (4fff)
  get Phys(data[n=3+5000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:5a3d9000
  ph data[3]=0:5a3d9000 (fff)
  get Phys(data[n=4+1000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:5a3da000
  ph data[3]=0:5a3d9000 (1fff)
  get Phys(data[n=4+2000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:5a3db000
  set TERM
  ph data[3]=0:5a3d9000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903e3c0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903e3c0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:5a3e4000
  ph data[0]=0:5a3e4000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:5a3e5000
  ph data[0]=0:5a3e4000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:5a3e6000
  ph data[0]=0:5a3e4000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:5a3e7000
  ph data[0]=0:5a3e4000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:5a3e8000
  ph data[0]=0:5a3e4000 (4fff)
  get Phys(data[n=1+5000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:5a3e1000
  ph data[1]=0:5a3e1000 (fff)
  get Phys(data[n=2+1000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:5a3e2000
  ph data[1]=0:5a3e1000 (1fff)
  get Phys(data[n=2+2000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:5a3e3000
  ph data[1]=0:5a3e1000 (2fff)
  get Phys(data[n=2+3000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:5a3ec000
  ph data[2]=0:5a3ec000 (fff)
  get Phys(data[n=3+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:5a3ed000
  ph data[2]=0:5a3ec000 (1fff)
  get Phys(data[n=3+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:5a3ee000
  ph data[2]=0:5a3ec000 (2fff)
  get Phys(data[n=3+3000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:5a3ef000
  ph data[2]=0:5a3ec000 (3fff)
  get Phys(data[n=3+4000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:5a3f0000
  ph data[2]=0:5a3ec000 (4fff)
  get Phys(data[n=3+5000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:5a3e9000
  ph data[3]=0:5a3e9000 (fff)
  get Phys(data[n=4+1000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:5a3ea000
  ph data[3]=0:5a3e9000 (1fff)
  get Phys(data[n=4+2000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:5a3eb000
  set TERM
  ph data[3]=0:5a3e9000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520be8
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903e340, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903e440, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903e440, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:5a3f4000
  ph data[0]=0:5a3f4000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:5a3f5000
  ph data[0]=0:5a3f4000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:5a3f6000
  ph data[0]=0:5a3f4000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:5a3f7000
  ph data[0]=0:5a3f4000 (3fff)
  get Phys(data[n=1+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:5a3f8000
  ph data[0]=0:5a3f4000 (4fff)
  get Phys(data[n=1+5000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:5a3f1000
  ph data[1]=0:5a3f1000 (fff)
  get Phys(data[n=2+1000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:5a3f2000
  ph data[1]=0:5a3f1000 (1fff)
  get Phys(data[n=2+2000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:5a3f3000
  ph data[1]=0:5a3f1000 (2fff)
  get Phys(data[n=2+3000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:5a3fc000
  ph data[2]=0:5a3fc000 (fff)
  get Phys(data[n=3+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:5a3fd000
  ph data[2]=0:5a3fc000 (1fff)
  get Phys(data[n=3+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:5a3fe000
  ph data[2]=0:5a3fc000 (2fff)
  get Phys(data[n=3+3000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:5a3ff000
  ph data[2]=0:5a3fc000 (3fff)
  get Phys(data[n=3+4000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:5a400000
  ph data[2]=0:5a3fc000 (4fff)
  get Phys(data[n=3+5000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:5a3f9000
  ph data[3]=0:5a3f9000 (fff)
  get Phys(data[n=4+1000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:5a3fa000
  ph data[3]=0:5a3f9000 (1fff)
  get Phys(data[n=4+2000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:5a3fb000
  set TERM
  ph data[3]=0:5a3f9000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903e3c0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903e440, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903e4c0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903e4c0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:5a254000
  ph data[0]=0:5a254000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:5a255000
  ph data[0]=0:5a254000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:5a256000
  ph data[0]=0:5a254000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:5a257000
  ph data[0]=0:5a254000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:5a250000
  ph data[1]=0:5a250000 (fff)
  get Phys(data[n=2+1000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:5a251000
  ph data[1]=0:5a250000 (1fff)
  get Phys(data[n=2+2000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:5a252000
  ph data[1]=0:5a250000 (2fff)
  get Phys(data[n=2+3000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:5a253000
  ph data[1]=0:5a250000 (3fff)
  get Phys(data[n=2+4000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:5a25c000
  ph data[2]=0:5a25c000 (fff)
  get Phys(data[n=3+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:5a25d000
  ph data[2]=0:5a25c000 (1fff)
  get Phys(data[n=3+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:5a25e000
  ph data[2]=0:5a25c000 (2fff)
  get Phys(data[n=3+3000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:5a25f000
  ph data[2]=0:5a25c000 (3fff)
  get Phys(data[n=3+4000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:5a258000
  ph data[3]=0:5a258000 (fff)
  get Phys(data[n=4+1000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:5a259000
  ph data[3]=0:5a258000 (1fff)
  get Phys(data[n=4+2000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:5a25a000
  ph data[3]=0:5a258000 (2fff)
  get Phys(data[n=4+3000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:5a25b000
  set TERM
  ph data[3]=0:5a258000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903e4c0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903e540, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903e540, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:5a264000
  ph data[0]=0:5a264000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:5a265000
  ph data[0]=0:5a264000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:5a266000
  ph data[0]=0:5a264000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:5a267000
  ph data[0]=0:5a264000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:5a260000
  ph data[1]=0:5a260000 (fff)
  get Phys(data[n=2+1000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:5a261000
  ph data[1]=0:5a260000 (1fff)
  get Phys(data[n=2+2000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:5a262000
  ph data[1]=0:5a260000 (2fff)
  get Phys(data[n=2+3000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:5a263000
  ph data[1]=0:5a260000 (3fff)
  get Phys(data[n=2+4000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:5a26c000
  ph data[2]=0:5a26c000 (fff)
  get Phys(data[n=3+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:5a26d000
  ph data[2]=0:5a26c000 (1fff)
  get Phys(data[n=3+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:5a26e000
  ph data[2]=0:5a26c000 (2fff)
  get Phys(data[n=3+3000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:5a26f000
  ph data[2]=0:5a26c000 (3fff)
  get Phys(data[n=3+4000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:5a268000
  ph data[3]=0:5a268000 (fff)
  get Phys(data[n=4+1000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:5a269000
  ph data[3]=0:5a268000 (1fff)
  get Phys(data[n=4+2000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:5a26a000
  ph data[3]=0:5a268000 (2fff)
  get Phys(data[n=4+3000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:5a26b000
  set TERM
  ph data[3]=0:5a268000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903e5c0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903e5c0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:5a274000
  ph data[0]=0:5a274000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:5a275000
  ph data[0]=0:5a274000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:5a276000
  ph data[0]=0:5a274000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:5a277000
  ph data[0]=0:5a274000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:5a270000
  ph data[1]=0:5a270000 (fff)
  get Phys(data[n=2+1000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:5a271000
  ph data[1]=0:5a270000 (1fff)
  get Phys(data[n=2+2000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:5a272000
  ph data[1]=0:5a270000 (2fff)
  get Phys(data[n=2+3000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:5a273000
  ph data[1]=0:5a270000 (3fff)
  get Phys(data[n=2+4000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:5a27c000
  ph data[2]=0:5a27c000 (fff)
  get Phys(data[n=3+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:5a27d000
  ph data[2]=0:5a27c000 (1fff)
  get Phys(data[n=3+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:5a27e000
  ph data[2]=0:5a27c000 (2fff)
  get Phys(data[n=3+3000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:5a27f000
  ph data[2]=0:5a27c000 (3fff)
  get Phys(data[n=3+4000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:5a278000
  ph data[3]=0:5a278000 (fff)
  get Phys(data[n=4+1000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:5a279000
  ph data[3]=0:5a278000 (1fff)
  get Phys(data[n=4+2000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:5a27a000
  ph data[3]=0:5a278000 (2fff)
  get Phys(data[n=4+3000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:5a27b000
  set TERM
  ph data[3]=0:5a278000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903e640, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903e640, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:5a284000
  ph data[0]=0:5a284000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:5a285000
  ph data[0]=0:5a284000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:5a286000
  ph data[0]=0:5a284000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:5a287000
  ph data[0]=0:5a284000 (3fff)
  get Phys(data[n=1+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:5a280000
  ph data[1]=0:5a280000 (fff)
  get Phys(data[n=2+1000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:5a281000
  ph data[1]=0:5a280000 (1fff)
  get Phys(data[n=2+2000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:5a282000
  ph data[1]=0:5a280000 (2fff)
  get Phys(data[n=2+3000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:5a283000
  ph data[1]=0:5a280000 (3fff)
  get Phys(data[n=2+4000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:5a28c000
  ph data[2]=0:5a28c000 (fff)
  get Phys(data[n=3+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:5a28d000
  ph data[2]=0:5a28c000 (1fff)
  get Phys(data[n=3+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:5a28e000
  ph data[2]=0:5a28c000 (2fff)
  get Phys(data[n=3+3000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:5a28f000
  ph data[2]=0:5a28c000 (3fff)
  get Phys(data[n=3+4000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:5a288000
  ph data[3]=0:5a288000 (fff)
  get Phys(data[n=4+1000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:5a289000
  ph data[3]=0:5a288000 (1fff)
  get Phys(data[n=4+2000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:5a28a000
  ph data[3]=0:5a288000 (2fff)
  get Phys(data[n=4+3000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:5a28b000
  set TERM
  ph data[3]=0:5a288000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903e540, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903e5c0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903e640, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b2c
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903e6c0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903e6c0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f74e4000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f74e4000)
AtapiVirtToPhysAddr_: f74e4000 -> 00000000:59dac000
  ph data[0]=0:59dac000 (fff)
  get Phys(data[n=1+1000]=f74e5000)
AtapiVirtToPhysAddr_: f74e5000 -> 00000000:59dad000
  ph data[0]=0:59dac000 (1fff)
  get Phys(data[n=1+2000]=f74e6000)
AtapiVirtToPhysAddr_: f74e6000 -> 00000000:59dae000
  ph data[0]=0:59dac000 (2fff)
  get Phys(data[n=1+3000]=f74e7000)
AtapiVirtToPhysAddr_: f74e7000 -> 00000000:59da7000
  ph data[1]=0:59da7000 (fff)
  get Phys(data[n=2+1000]=f74e8000)
AtapiVirtToPhysAddr_: f74e8000 -> 00000000:59da8000
  ph data[1]=0:59da7000 (1fff)
  get Phys(data[n=2+2000]=f74e9000)
AtapiVirtToPhysAddr_: f74e9000 -> 00000000:59da9000
  ph data[1]=0:59da7000 (2fff)
  get Phys(data[n=2+3000]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:59daa000
  ph data[1]=0:59da7000 (3fff)
  get Phys(data[n=2+4000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:59dab000
  ph data[1]=0:59da7000 (4fff)
  get Phys(data[n=2+5000]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:59db4000
  ph data[2]=0:59db4000 (fff)
  get Phys(data[n=3+1000]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:59db5000
  ph data[2]=0:59db4000 (1fff)
  get Phys(data[n=3+2000]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:59db6000
  ph data[2]=0:59db4000 (2fff)
  get Phys(data[n=3+3000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:59daf000
  ph data[3]=0:59daf000 (fff)
  get Phys(data[n=4+1000]=f74f0000)
AtapiVirtToPhysAddr_: f74f0000 -> 00000000:59db0000
  ph data[3]=0:59daf000 (1fff)
  get Phys(data[n=4+2000]=f74f1000)
AtapiVirtToPhysAddr_: f74f1000 -> 00000000:59db1000
  ph data[3]=0:59daf000 (2fff)
  get Phys(data[n=4+3000]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:59db2000
  ph data[3]=0:59daf000 (3fff)
  get Phys(data[n=4+4000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:59db3000
  set TERM
  ph data[3]=0:59daf000 (4fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903e6c0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b2c
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903e740, OrigWordsRequested 0x5a00, DevSize 0x5a
IdeReadWrite (REQ): Starting sector is 3903e740, Number of WORDS 0x5a00, DevSize 0x5a
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f74f4000, count b400, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:59dbc000
  ph data[0]=0:59dbc000 (fff)
  get Phys(data[n=1+1000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:59dbd000
  ph data[0]=0:59dbc000 (1fff)
  get Phys(data[n=1+2000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:59dbe000
  ph data[0]=0:59dbc000 (2fff)
  get Phys(data[n=1+3000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:59db7000
  ph data[1]=0:59db7000 (fff)
  get Phys(data[n=2+1000]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:59db8000
  ph data[1]=0:59db7000 (1fff)
  get Phys(data[n=2+2000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:59db9000
  ph data[1]=0:59db7000 (2fff)
  get Phys(data[n=2+3000]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:59dba000
  ph data[1]=0:59db7000 (3fff)
  get Phys(data[n=2+4000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:59dbb000
  ph data[1]=0:59db7000 (4fff)
  get Phys(data[n=2+5000]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:59dc4000
  ph data[2]=0:59dc4000 (fff)
  get Phys(data[n=3+1000]=f74fd000)
AtapiVirtToPhysAddr_: f74fd000 -> 00000000:59dc5000
  ph data[2]=0:59dc4000 (1fff)
  get Phys(data[n=3+2000]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:59dc6000
  ph data[2]=0:59dc4000 (2fff)
  get Phys(data[n=3+3000]=f74ff000)
AtapiVirtToPhysAddr_: f74ff000 -> 00000000:59dbf000
  set TERM
  ph data[3]=0:59dbf000 (3ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903e740, Count 0x5a(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 5a00, WordsLeft 5a00
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered b400, full size b400
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903e7a0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903e7a0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:59c95000
  ph data[0]=0:59c95000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:59c96000
  ph data[0]=0:59c95000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:59c97000
  ph data[0]=0:59c95000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:59c98000
  ph data[0]=0:59c95000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:59c99000
  ph data[0]=0:59c95000 (4fff)
  get Phys(data[n=1+5000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:59c9a000
  ph data[0]=0:59c95000 (5fff)
  get Phys(data[n=1+6000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:59c93000
  ph data[1]=0:59c93000 (fff)
  get Phys(data[n=2+1000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:59c94000
  ph data[1]=0:59c93000 (1fff)
  get Phys(data[n=2+2000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:59c9d000
  ph data[2]=0:59c9d000 (fff)
  get Phys(data[n=3+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:59c9e000
  ph data[2]=0:59c9d000 (1fff)
  get Phys(data[n=3+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:59c9f000
  ph data[2]=0:59c9d000 (2fff)
  get Phys(data[n=3+3000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:59ca0000
  ph data[2]=0:59c9d000 (3fff)
  get Phys(data[n=3+4000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:59ca1000
  ph data[2]=0:59c9d000 (4fff)
  get Phys(data[n=3+5000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:59ca2000
  ph data[2]=0:59c9d000 (5fff)
  get Phys(data[n=3+6000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:59c9b000
  ph data[3]=0:59c9b000 (fff)
  get Phys(data[n=4+1000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:59c9c000
  set TERM
  ph data[3]=0:59c9b000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903e7a0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903e820, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903e820, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:59ca5000
  ph data[0]=0:59ca5000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:59ca6000
  ph data[0]=0:59ca5000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:59ca7000
  ph data[0]=0:59ca5000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:59ca8000
  ph data[0]=0:59ca5000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:59ca9000
  ph data[0]=0:59ca5000 (4fff)
  get Phys(data[n=1+5000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:59caa000
  ph data[0]=0:59ca5000 (5fff)
  get Phys(data[n=1+6000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:59ca3000
  ph data[1]=0:59ca3000 (fff)
  get Phys(data[n=2+1000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:59ca4000
  ph data[1]=0:59ca3000 (1fff)
  get Phys(data[n=2+2000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:59cad000
  ph data[2]=0:59cad000 (fff)
  get Phys(data[n=3+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:59cae000
  ph data[2]=0:59cad000 (1fff)
  get Phys(data[n=3+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:59caf000
  ph data[2]=0:59cad000 (2fff)
  get Phys(data[n=3+3000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:59cb0000
  ph data[2]=0:59cad000 (3fff)
  get Phys(data[n=3+4000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:59cb1000
  ph data[2]=0:59cad000 (4fff)
  get Phys(data[n=3+5000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:59cb2000
  ph data[2]=0:59cad000 (5fff)
  get Phys(data[n=3+6000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:59cab000
  ph data[3]=0:59cab000 (fff)
  get Phys(data[n=4+1000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:59cac000
  set TERM
  ph data[3]=0:59cab000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903e8a0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903e8a0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:59cb5000
  ph data[0]=0:59cb5000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:59cb6000
  ph data[0]=0:59cb5000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:59cb7000
  ph data[0]=0:59cb5000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:59cb8000
  ph data[0]=0:59cb5000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:59cb9000
  ph data[0]=0:59cb5000 (4fff)
  get Phys(data[n=1+5000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:59cba000
  ph data[0]=0:59cb5000 (5fff)
  get Phys(data[n=1+6000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:59cb3000
  ph data[1]=0:59cb3000 (fff)
  get Phys(data[n=2+1000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:59cb4000
  ph data[1]=0:59cb3000 (1fff)
  get Phys(data[n=2+2000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:59cbd000
  ph data[2]=0:59cbd000 (fff)
  get Phys(data[n=3+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:59cbe000
  ph data[2]=0:59cbd000 (1fff)
  get Phys(data[n=3+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:59cbf000
  ph data[2]=0:59cbd000 (2fff)
  get Phys(data[n=3+3000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:59cc0000
  ph data[2]=0:59cbd000 (3fff)
  get Phys(data[n=3+4000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:59cc1000
  ph data[2]=0:59cbd000 (4fff)
  get Phys(data[n=3+5000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:59cc2000
  ph data[2]=0:59cbd000 (5fff)
  get Phys(data[n=3+6000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:59cbb000
  ph data[3]=0:59cbb000 (fff)
  get Phys(data[n=4+1000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:59cbc000
  set TERM
  ph data[3]=0:59cbb000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520bf0
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903e820, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903e920, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903e920, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:59cc5000
  ph data[0]=0:59cc5000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:59cc6000
  ph data[0]=0:59cc5000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:59cc7000
  ph data[0]=0:59cc5000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:59cc8000
  ph data[0]=0:59cc5000 (3fff)
  get Phys(data[n=1+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:59cc9000
  ph data[0]=0:59cc5000 (4fff)
  get Phys(data[n=1+5000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:59cca000
  ph data[0]=0:59cc5000 (5fff)
  get Phys(data[n=1+6000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:59cc3000
  ph data[1]=0:59cc3000 (fff)
  get Phys(data[n=2+1000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:59cc4000
  ph data[1]=0:59cc3000 (1fff)
  get Phys(data[n=2+2000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:59ccd000
  ph data[2]=0:59ccd000 (fff)
  get Phys(data[n=3+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:59cce000
  ph data[2]=0:59ccd000 (1fff)
  get Phys(data[n=3+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:59ccf000
  ph data[2]=0:59ccd000 (2fff)
  get Phys(data[n=3+3000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:59cd0000
  ph data[2]=0:59ccd000 (3fff)
  get Phys(data[n=3+4000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:59cd1000
  ph data[2]=0:59ccd000 (4fff)
  get Phys(data[n=3+5000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:59cd2000
  ph data[2]=0:59ccd000 (5fff)
  get Phys(data[n=3+6000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:59ccb000
  ph data[3]=0:59ccb000 (fff)
  get Phys(data[n=4+1000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:59ccc000
  set TERM
  ph data[3]=0:59ccb000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903e8a0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903e920, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903eba0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903eba0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f705b000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:598be000
  ph data[0]=0:598be000 (fff)
  get Phys(data[n=1+1000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:598bf000
  ph data[0]=0:598be000 (1fff)
  get Phys(data[n=1+2000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:598c0000
  ph data[0]=0:598be000 (2fff)
  get Phys(data[n=1+3000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:598c1000
  ph data[0]=0:598be000 (3fff)
  get Phys(data[n=1+4000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:598ba000
  ph data[1]=0:598ba000 (fff)
  get Phys(data[n=2+1000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:598bb000
  ph data[1]=0:598ba000 (1fff)
  get Phys(data[n=2+2000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:598bc000
  ph data[1]=0:598ba000 (2fff)
  get Phys(data[n=2+3000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:598c5000
  ph data[2]=0:598c5000 (fff)
  get Phys(data[n=3+1000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:598c6000
  ph data[2]=0:598c5000 (1fff)
  get Phys(data[n=3+2000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:598c7000
  ph data[2]=0:598c5000 (2fff)
  get Phys(data[n=3+3000]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:598c8000
  ph data[2]=0:598c5000 (3fff)
  get Phys(data[n=3+4000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:598c9000
  ph data[2]=0:598c5000 (4fff)
  get Phys(data[n=3+5000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:598c2000
  ph data[3]=0:598c2000 (fff)
  get Phys(data[n=4+1000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:598c3000
  ph data[3]=0:598c2000 (1fff)
  get Phys(data[n=4+2000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:598c4000
  ph data[3]=0:598c2000 (2fff)
  get Phys(data[n=4+3000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:598cd000
  set TERM
  ph data[4]=0:598cd000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903eba0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x5, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903ec20, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903ec20, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f706b000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:598ce000
  ph data[0]=0:598ce000 (fff)
  get Phys(data[n=1+1000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:598cf000
  ph data[0]=0:598ce000 (1fff)
  get Phys(data[n=1+2000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:598d0000
  ph data[0]=0:598ce000 (2fff)
  get Phys(data[n=1+3000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:598d1000
  ph data[0]=0:598ce000 (3fff)
  get Phys(data[n=1+4000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:598ca000
  ph data[1]=0:598ca000 (fff)
  get Phys(data[n=2+1000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:598cb000
  ph data[1]=0:598ca000 (1fff)
  get Phys(data[n=2+2000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:598cc000
  ph data[1]=0:598ca000 (2fff)
  get Phys(data[n=2+3000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:598d5000
  ph data[2]=0:598d5000 (fff)
  get Phys(data[n=3+1000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:598d6000
  ph data[2]=0:598d5000 (1fff)
  get Phys(data[n=3+2000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:598d7000
  ph data[2]=0:598d5000 (2fff)
  get Phys(data[n=3+3000]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:598d8000
  ph data[2]=0:598d5000 (3fff)
  get Phys(data[n=3+4000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:598d9000
  ph data[2]=0:598d5000 (4fff)
  get Phys(data[n=3+5000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:598d2000
  ph data[3]=0:598d2000 (fff)
  get Phys(data[n=4+1000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:598d3000
  ph data[3]=0:598d2000 (1fff)
  get Phys(data[n=4+2000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:598d4000
  ph data[3]=0:598d2000 (2fff)
  get Phys(data[n=4+3000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:598dd000
  set TERM
  ph data[4]=0:598dd000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903eca0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903eca0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f707b000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:598de000
  ph data[0]=0:598de000 (fff)
  get Phys(data[n=1+1000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:598df000
  ph data[0]=0:598de000 (1fff)
  get Phys(data[n=1+2000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:598e0000
  ph data[0]=0:598de000 (2fff)
  get Phys(data[n=1+3000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:598e1000
  ph data[0]=0:598de000 (3fff)
  get Phys(data[n=1+4000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:598da000
  ph data[1]=0:598da000 (fff)
  get Phys(data[n=2+1000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:598db000
  ph data[1]=0:598da000 (1fff)
  get Phys(data[n=2+2000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:598dc000
  ph data[1]=0:598da000 (2fff)
  get Phys(data[n=2+3000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:598e5000
  ph data[2]=0:598e5000 (fff)
  get Phys(data[n=3+1000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:598e6000
  ph data[2]=0:598e5000 (1fff)
  get Phys(data[n=3+2000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:598e7000
  ph data[2]=0:598e5000 (2fff)
  get Phys(data[n=3+3000]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:598e8000
  ph data[2]=0:598e5000 (3fff)
  get Phys(data[n=3+4000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:598e9000
  ph data[2]=0:598e5000 (4fff)
  get Phys(data[n=3+5000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:598e2000
  ph data[3]=0:598e2000 (fff)
  get Phys(data[n=4+1000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:598e3000
  ph data[3]=0:598e2000 (1fff)
  get Phys(data[n=4+2000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:598e4000
  ph data[3]=0:598e2000 (2fff)
  get Phys(data[n=4+3000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:598ed000
  set TERM
  ph data[4]=0:598ed000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903ed20, OrigWordsRequested 0x4700, DevSize 0x47
IdeReadWrite (REQ): Starting sector is 3903ed20, Number of WORDS 0x4700, DevSize 0x47
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f708b000, count 8e00, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:598ee000
  ph data[0]=0:598ee000 (fff)
  get Phys(data[n=1+1000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:598ef000
  ph data[0]=0:598ee000 (1fff)
  get Phys(data[n=1+2000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:598f0000
  ph data[0]=0:598ee000 (2fff)
  get Phys(data[n=1+3000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:598f1000
  ph data[0]=0:598ee000 (3fff)
  get Phys(data[n=1+4000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:598ea000
  ph data[1]=0:598ea000 (fff)
  get Phys(data[n=2+1000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:598eb000
  ph data[1]=0:598ea000 (1fff)
  get Phys(data[n=2+2000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:598ec000
  ph data[1]=0:598ea000 (2fff)
  get Phys(data[n=2+3000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:598f5000
  ph data[2]=0:598f5000 (fff)
  get Phys(data[n=3+1000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:598f6000
  set TERM
  ph data[2]=0:598f5000 (1dff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903ec20, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x5, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903eca0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x5, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903ed20, Count 0x47(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x3, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 4700, WordsLeft 4700
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 8e00, full size 8e00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903ed70, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903ed70, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:58f30000
  ph data[0]=0:58f30000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:58f31000
  ph data[0]=0:58f30000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:58f32000
  ph data[0]=0:58f30000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:58f33000
  ph data[0]=0:58f30000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:58f34000
  ph data[0]=0:58f30000 (4fff)
  get Phys(data[n=1+5000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:58f2d000
  ph data[1]=0:58f2d000 (fff)
  get Phys(data[n=2+1000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:58f2e000
  ph data[1]=0:58f2d000 (1fff)
  get Phys(data[n=2+2000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:58f2f000
  ph data[1]=0:58f2d000 (2fff)
  get Phys(data[n=2+3000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:58f38000
  ph data[2]=0:58f38000 (fff)
  get Phys(data[n=3+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:58f39000
  ph data[2]=0:58f38000 (1fff)
  get Phys(data[n=3+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:58f3a000
  ph data[2]=0:58f38000 (2fff)
  get Phys(data[n=3+3000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:58f3b000
  ph data[2]=0:58f38000 (3fff)
  get Phys(data[n=3+4000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:58f3c000
  ph data[2]=0:58f38000 (4fff)
  get Phys(data[n=3+5000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:58f35000
  ph data[3]=0:58f35000 (fff)
  get Phys(data[n=4+1000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:58f36000
  ph data[3]=0:58f35000 (1fff)
  get Phys(data[n=4+2000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:58f37000
  set TERM
  ph data[3]=0:58f35000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903ed70, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903edf0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903edf0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:58f40000
  ph data[0]=0:58f40000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:58f41000
  ph data[0]=0:58f40000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:58f42000
  ph data[0]=0:58f40000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:58f43000
  ph data[0]=0:58f40000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:58f44000
  ph data[0]=0:58f40000 (4fff)
  get Phys(data[n=1+5000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:58f3d000
  ph data[1]=0:58f3d000 (fff)
  get Phys(data[n=2+1000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:58f3e000
  ph data[1]=0:58f3d000 (1fff)
  get Phys(data[n=2+2000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:58f3f000
  ph data[1]=0:58f3d000 (2fff)
  get Phys(data[n=2+3000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:58f48000
  ph data[2]=0:58f48000 (fff)
  get Phys(data[n=3+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:58f49000
  ph data[2]=0:58f48000 (1fff)
  get Phys(data[n=3+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:58f4a000
  ph data[2]=0:58f48000 (2fff)
  get Phys(data[n=3+3000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:58f4b000
  ph data[2]=0:58f48000 (3fff)
  get Phys(data[n=3+4000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:58f4c000
  ph data[2]=0:58f48000 (4fff)
  get Phys(data[n=3+5000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:58f45000
  ph data[3]=0:58f45000 (fff)
  get Phys(data[n=4+1000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:58f46000
  ph data[3]=0:58f45000 (1fff)
  get Phys(data[n=4+2000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:58f47000
  set TERM
  ph data[3]=0:58f45000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903ee70, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903ee70, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:58f50000
  ph data[0]=0:58f50000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:58f51000
  ph data[0]=0:58f50000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:58f52000
  ph data[0]=0:58f50000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:58f53000
  ph data[0]=0:58f50000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:58f54000
  ph data[0]=0:58f50000 (4fff)
  get Phys(data[n=1+5000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:58f4d000
  ph data[1]=0:58f4d000 (fff)
  get Phys(data[n=2+1000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:58f4e000
  ph data[1]=0:58f4d000 (1fff)
  get Phys(data[n=2+2000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:58f4f000
  ph data[1]=0:58f4d000 (2fff)
  get Phys(data[n=2+3000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:58f58000
  ph data[2]=0:58f58000 (fff)
  get Phys(data[n=3+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:58f59000
  ph data[2]=0:58f58000 (1fff)
  get Phys(data[n=3+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:58f5a000
  ph data[2]=0:58f58000 (2fff)
  get Phys(data[n=3+3000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:58f5b000
  ph data[2]=0:58f58000 (3fff)
  get Phys(data[n=3+4000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:58f5c000
  ph data[2]=0:58f58000 (4fff)
  get Phys(data[n=3+5000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:58f55000
  ph data[3]=0:58f55000 (fff)
  get Phys(data[n=4+1000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:58f56000
  ph data[3]=0:58f55000 (1fff)
  get Phys(data[n=4+2000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:58f57000
  set TERM
  ph data[3]=0:58f55000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520bf0
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903edf0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903eef0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903eef0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:58f60000
  ph data[0]=0:58f60000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:58f61000
  ph data[0]=0:58f60000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:58f62000
  ph data[0]=0:58f60000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:58f63000
  ph data[0]=0:58f60000 (3fff)
  get Phys(data[n=1+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:58f64000
  ph data[0]=0:58f60000 (4fff)
  get Phys(data[n=1+5000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:58f5d000
  ph data[1]=0:58f5d000 (fff)
  get Phys(data[n=2+1000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:58f5e000
  ph data[1]=0:58f5d000 (1fff)
  get Phys(data[n=2+2000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:58f5f000
  ph data[1]=0:58f5d000 (2fff)
  get Phys(data[n=2+3000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:58f68000
  ph data[2]=0:58f68000 (fff)
  get Phys(data[n=3+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:58f69000
  ph data[2]=0:58f68000 (1fff)
  get Phys(data[n=3+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:58f6a000
  ph data[2]=0:58f68000 (2fff)
  get Phys(data[n=3+3000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:58f6b000
  ph data[2]=0:58f68000 (3fff)
  get Phys(data[n=3+4000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:58f6c000
  ph data[2]=0:58f68000 (4fff)
  get Phys(data[n=3+5000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:58f65000
  ph data[3]=0:58f65000 (fff)
  get Phys(data[n=4+1000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:58f66000
  ph data[3]=0:58f65000 (1fff)
  get Phys(data[n=4+2000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:58f67000
  set TERM
  ph data[3]=0:58f65000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf78019dc
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903ee70, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903eef0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903f170, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903f170, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f74dc000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f74dc000)
AtapiVirtToPhysAddr_: f74dc000 -> 00000000:58d10000
  ph data[0]=0:58d10000 (fff)
  get Phys(data[n=1+1000]=f74dd000)
AtapiVirtToPhysAddr_: f74dd000 -> 00000000:58d11000
  ph data[0]=0:58d10000 (1fff)
  get Phys(data[n=1+2000]=f74de000)
AtapiVirtToPhysAddr_: f74de000 -> 00000000:58d12000
  ph data[0]=0:58d10000 (2fff)
  get Phys(data[n=1+3000]=f74df000)
AtapiVirtToPhysAddr_: f74df000 -> 00000000:58d13000
  ph data[0]=0:58d10000 (3fff)
  get Phys(data[n=1+4000]=f74e0000)
AtapiVirtToPhysAddr_: f74e0000 -> 00000000:58d0c000
  ph data[1]=0:58d0c000 (fff)
  get Phys(data[n=2+1000]=f74e1000)
AtapiVirtToPhysAddr_: f74e1000 -> 00000000:58d0d000
  ph data[1]=0:58d0c000 (1fff)
  get Phys(data[n=2+2000]=f74e2000)
AtapiVirtToPhysAddr_: f74e2000 -> 00000000:58d0e000
  ph data[1]=0:58d0c000 (2fff)
  get Phys(data[n=2+3000]=f74e3000)
AtapiVirtToPhysAddr_: f74e3000 -> 00000000:58d0f000
  ph data[1]=0:58d0c000 (3fff)
  get Phys(data[n=2+4000]=f74e4000)
AtapiVirtToPhysAddr_: f74e4000 -> 00000000:58d18000
  ph data[2]=0:58d18000 (fff)
  get Phys(data[n=3+1000]=f74e5000)
AtapiVirtToPhysAddr_: f74e5000 -> 00000000:58d19000
  ph data[2]=0:58d18000 (1fff)
  get Phys(data[n=3+2000]=f74e6000)
AtapiVirtToPhysAddr_: f74e6000 -> 00000000:58d1a000
  ph data[2]=0:58d18000 (2fff)
  get Phys(data[n=3+3000]=f74e7000)
AtapiVirtToPhysAddr_: f74e7000 -> 00000000:58d1b000
  ph data[2]=0:58d18000 (3fff)
  get Phys(data[n=3+4000]=f74e8000)
AtapiVirtToPhysAddr_: f74e8000 -> 00000000:58d14000
  ph data[3]=0:58d14000 (fff)
  get Phys(data[n=4+1000]=f74e9000)
AtapiVirtToPhysAddr_: f74e9000 -> 00000000:58d15000
  ph data[3]=0:58d14000 (1fff)
  get Phys(data[n=4+2000]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:58d16000
  ph data[3]=0:58d14000 (2fff)
  get Phys(data[n=4+3000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:58d17000
  set TERM
  ph data[3]=0:58d14000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903f170, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903f1f0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903f1f0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f74ec000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:58d20000
  ph data[0]=0:58d20000 (fff)
  get Phys(data[n=1+1000]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:58d21000
  ph data[0]=0:58d20000 (1fff)
  get Phys(data[n=1+2000]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:58d22000
  ph data[0]=0:58d20000 (2fff)
  get Phys(data[n=1+3000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:58d23000
  ph data[0]=0:58d20000 (3fff)
  get Phys(data[n=1+4000]=f74f0000)
AtapiVirtToPhysAddr_: f74f0000 -> 00000000:58d1c000
  ph data[1]=0:58d1c000 (fff)
  get Phys(data[n=2+1000]=f74f1000)
AtapiVirtToPhysAddr_: f74f1000 -> 00000000:58d1d000
  ph data[1]=0:58d1c000 (1fff)
  get Phys(data[n=2+2000]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:58d1e000
  ph data[1]=0:58d1c000 (2fff)
  get Phys(data[n=2+3000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:58d1f000
  ph data[1]=0:58d1c000 (3fff)
  get Phys(data[n=2+4000]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:58d28000
  ph data[2]=0:58d28000 (fff)
  get Phys(data[n=3+1000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:58d29000
  ph data[2]=0:58d28000 (1fff)
  get Phys(data[n=3+2000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:58d2a000
  ph data[2]=0:58d28000 (2fff)
  get Phys(data[n=3+3000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:58d2b000
  ph data[2]=0:58d28000 (3fff)
  get Phys(data[n=3+4000]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:58d24000
  ph data[3]=0:58d24000 (fff)
  get Phys(data[n=4+1000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:58d25000
  ph data[3]=0:58d24000 (1fff)
  get Phys(data[n=4+2000]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:58d26000
  ph data[3]=0:58d24000 (2fff)
  get Phys(data[n=4+3000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:58d27000
  set TERM
  ph data[3]=0:58d24000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903f270, OrigWordsRequested 0x1300, DevSize 0x13
IdeReadWrite (REQ): Starting sector is 3903f270, Number of WORDS 0x1300, DevSize 0x13
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f74fc000, count 2600, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:58d30000
  ph data[0]=0:58d30000 (fff)
  get Phys(data[n=1+1000]=f74fd000)
AtapiVirtToPhysAddr_: f74fd000 -> 00000000:58d31000
  ph data[0]=0:58d30000 (1fff)
  get Phys(data[n=1+2000]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:58d32000
  set TERM
  ph data[0]=0:58d30000 (25ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903f1f0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903f270, Count 0x13(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1300, WordsLeft 1300
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2600, full size 2600
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903f290, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903f290, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:5849a000
  ph data[0]=0:5849a000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:5849b000
  ph data[0]=0:5849a000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:5849c000
  ph data[0]=0:5849a000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:5849d000
  ph data[0]=0:5849a000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:5849e000
  ph data[0]=0:5849a000 (4fff)
  get Phys(data[n=1+5000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:5849f000
  ph data[0]=0:5849a000 (5fff)
  get Phys(data[n=1+6000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:584a0000
  ph data[0]=0:5849a000 (6fff)
  get Phys(data[n=1+7000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:584a1000
  ph data[0]=0:5849a000 (7fff)
  get Phys(data[n=1+8000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:584a2000
  ph data[0]=0:5849a000 (8fff)
  get Phys(data[n=1+9000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:584a3000
  ph data[0]=0:5849a000 (9fff)
  get Phys(data[n=1+a000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:584a4000
  ph data[0]=0:5849a000 (afff)
  get Phys(data[n=1+b000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:584a5000
  ph data[0]=0:5849a000 (bfff)
  get Phys(data[n=1+c000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:584a6000
  ph data[0]=0:5849a000 (cfff)
  get Phys(data[n=1+d000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:584a7000
  ph data[0]=0:5849a000 (dfff)
  get Phys(data[n=1+e000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:584a8000
  ph data[0]=0:5849a000 (efff)
  get Phys(data[n=1+f000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:584a9000
  set TERM
  ph data[0]=0:5849a000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903f290, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903f310, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903f310, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:584aa000
  ph data[0]=0:584aa000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:584ab000
  ph data[0]=0:584aa000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:584ac000
  ph data[0]=0:584aa000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:584ad000
  ph data[0]=0:584aa000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:584ae000
  ph data[0]=0:584aa000 (4fff)
  get Phys(data[n=1+5000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:584af000
  ph data[0]=0:584aa000 (5fff)
  get Phys(data[n=1+6000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:584b0000
  ph data[0]=0:584aa000 (6fff)
  get Phys(data[n=1+7000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:584b1000
  ph data[0]=0:584aa000 (7fff)
  get Phys(data[n=1+8000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:584b2000
  ph data[0]=0:584aa000 (8fff)
  get Phys(data[n=1+9000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:584b3000
  ph data[0]=0:584aa000 (9fff)
  get Phys(data[n=1+a000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:584b4000
  ph data[0]=0:584aa000 (afff)
  get Phys(data[n=1+b000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:584b5000
  ph data[0]=0:584aa000 (bfff)
  get Phys(data[n=1+c000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:584b6000
  ph data[0]=0:584aa000 (cfff)
  get Phys(data[n=1+d000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:584b7000
  ph data[0]=0:584aa000 (dfff)
  get Phys(data[n=1+e000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:584b8000
  ph data[0]=0:584aa000 (efff)
  get Phys(data[n=1+f000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:584b9000
  set TERM
  ph data[0]=0:584aa000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903f390, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903f390, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:584ba000
  ph data[0]=0:584ba000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:584bb000
  ph data[0]=0:584ba000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:584bc000
  ph data[0]=0:584ba000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:584bd000
  ph data[0]=0:584ba000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:584be000
  ph data[0]=0:584ba000 (4fff)
  get Phys(data[n=1+5000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:584bf000
  ph data[0]=0:584ba000 (5fff)
  get Phys(data[n=1+6000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:584c0000
  ph data[0]=0:584ba000 (6fff)
  get Phys(data[n=1+7000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:584c1000
  ph data[0]=0:584ba000 (7fff)
  get Phys(data[n=1+8000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:584c2000
  ph data[0]=0:584ba000 (8fff)
  get Phys(data[n=1+9000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:584c3000
  ph data[0]=0:584ba000 (9fff)
  get Phys(data[n=1+a000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:584c4000
  ph data[0]=0:584ba000 (afff)
  get Phys(data[n=1+b000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:584c5000
  ph data[0]=0:584ba000 (bfff)
  get Phys(data[n=1+c000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:584c6000
  ph data[0]=0:584ba000 (cfff)
  get Phys(data[n=1+d000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:584c7000
  ph data[0]=0:584ba000 (dfff)
  get Phys(data[n=1+e000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:584c8000
  ph data[0]=0:584ba000 (efff)
  get Phys(data[n=1+f000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:584c9000
  set TERM
  ph data[0]=0:584ba000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520bf0
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903f310, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903f410, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903f410, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:584ca000
  ph data[0]=0:584ca000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:584cb000
  ph data[0]=0:584ca000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:584cc000
  ph data[0]=0:584ca000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:584cd000
  ph data[0]=0:584ca000 (3fff)
  get Phys(data[n=1+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:584ce000
  ph data[0]=0:584ca000 (4fff)
  get Phys(data[n=1+5000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:584cf000
  ph data[0]=0:584ca000 (5fff)
  get Phys(data[n=1+6000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:584d0000
  ph data[0]=0:584ca000 (6fff)
  get Phys(data[n=1+7000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:584d1000
  ph data[0]=0:584ca000 (7fff)
  get Phys(data[n=1+8000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:584d2000
  ph data[0]=0:584ca000 (8fff)
  get Phys(data[n=1+9000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:584d3000
  ph data[0]=0:584ca000 (9fff)
  get Phys(data[n=1+a000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:584d4000
  ph data[0]=0:584ca000 (afff)
  get Phys(data[n=1+b000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:584d5000
  ph data[0]=0:584ca000 (bfff)
  get Phys(data[n=1+c000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:584d6000
  ph data[0]=0:584ca000 (cfff)
  get Phys(data[n=1+d000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:584d7000
  ph data[0]=0:584ca000 (dfff)
  get Phys(data[n=1+e000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:584d8000
  ph data[0]=0:584ca000 (efff)
  get Phys(data[n=1+f000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:584d9000
  set TERM
  ph data[0]=0:584ca000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520bf0
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903f390, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x1, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903f410, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903f490, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903f490, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:580d2000
  ph data[0]=0:580d2000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:580d3000
  ph data[0]=0:580d2000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:580d4000
  ph data[0]=0:580d2000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:580d5000
  ph data[0]=0:580d2000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:580d6000
  ph data[0]=0:580d2000 (4fff)
  get Phys(data[n=1+5000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:580d7000
  ph data[0]=0:580d2000 (5fff)
  get Phys(data[n=1+6000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:580d0000
  ph data[1]=0:580d0000 (fff)
  get Phys(data[n=2+1000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:580d1000
  ph data[1]=0:580d0000 (1fff)
  get Phys(data[n=2+2000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:580da000
  ph data[2]=0:580da000 (fff)
  get Phys(data[n=3+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:580db000
  ph data[2]=0:580da000 (1fff)
  get Phys(data[n=3+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:580dc000
  ph data[2]=0:580da000 (2fff)
  get Phys(data[n=3+3000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:580dd000
  ph data[2]=0:580da000 (3fff)
  get Phys(data[n=3+4000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:580de000
  ph data[2]=0:580da000 (4fff)
  get Phys(data[n=3+5000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:580df000
  ph data[2]=0:580da000 (5fff)
  get Phys(data[n=3+6000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:580d8000
  ph data[3]=0:580d8000 (fff)
  get Phys(data[n=4+1000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:580d9000
  set TERM
  ph data[3]=0:580d8000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903f490, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903f510, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903f510, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:580e2000
  ph data[0]=0:580e2000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:580e3000
  ph data[0]=0:580e2000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:580e4000
  ph data[0]=0:580e2000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:580e5000
  ph data[0]=0:580e2000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:580e6000
  ph data[0]=0:580e2000 (4fff)
  get Phys(data[n=1+5000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:580e7000
  ph data[0]=0:580e2000 (5fff)
  get Phys(data[n=1+6000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:580e0000
  ph data[1]=0:580e0000 (fff)
  get Phys(data[n=2+1000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:580e1000
  ph data[1]=0:580e0000 (1fff)
  get Phys(data[n=2+2000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:580ea000
  ph data[2]=0:580ea000 (fff)
  get Phys(data[n=3+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:580eb000
  ph data[2]=0:580ea000 (1fff)
  get Phys(data[n=3+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:580ec000
  ph data[2]=0:580ea000 (2fff)
  get Phys(data[n=3+3000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:580ed000
  ph data[2]=0:580ea000 (3fff)
  get Phys(data[n=3+4000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:580ee000
  ph data[2]=0:580ea000 (4fff)
  get Phys(data[n=3+5000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:580ef000
  ph data[2]=0:580ea000 (5fff)
  get Phys(data[n=3+6000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:580e8000
  ph data[3]=0:580e8000 (fff)
  get Phys(data[n=4+1000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:580e9000
  set TERM
  ph data[3]=0:580e8000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903f590, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903f590, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:580f2000
  ph data[0]=0:580f2000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:580f3000
  ph data[0]=0:580f2000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:580f4000
  ph data[0]=0:580f2000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:580f5000
  ph data[0]=0:580f2000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:580f6000
  ph data[0]=0:580f2000 (4fff)
  get Phys(data[n=1+5000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:580f7000
  ph data[0]=0:580f2000 (5fff)
  get Phys(data[n=1+6000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:580f0000
  ph data[1]=0:580f0000 (fff)
  get Phys(data[n=2+1000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:580f1000
  ph data[1]=0:580f0000 (1fff)
  get Phys(data[n=2+2000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:580fa000
  ph data[2]=0:580fa000 (fff)
  get Phys(data[n=3+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:580fb000
  ph data[2]=0:580fa000 (1fff)
  get Phys(data[n=3+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:580fc000
  ph data[2]=0:580fa000 (2fff)
  get Phys(data[n=3+3000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:580fd000
  ph data[2]=0:580fa000 (3fff)
  get Phys(data[n=3+4000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:580fe000
  ph data[2]=0:580fa000 (4fff)
  get Phys(data[n=3+5000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:580ff000
  ph data[2]=0:580fa000 (5fff)
  get Phys(data[n=3+6000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:580f8000
  ph data[3]=0:580f8000 (fff)
  get Phys(data[n=4+1000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:580f9000
  set TERM
  ph data[3]=0:580f8000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf752095c
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903f510, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903f610, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903f610, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:58102000
  ph data[0]=0:58102000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:58103000
  ph data[0]=0:58102000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:58104000
  ph data[0]=0:58102000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:58105000
  ph data[0]=0:58102000 (3fff)
  get Phys(data[n=1+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:58106000
  ph data[0]=0:58102000 (4fff)
  get Phys(data[n=1+5000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:58107000
  ph data[0]=0:58102000 (5fff)
  get Phys(data[n=1+6000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:58100000
  ph data[1]=0:58100000 (fff)
  get Phys(data[n=2+1000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:58101000
  ph data[1]=0:58100000 (1fff)
  get Phys(data[n=2+2000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:5810a000
  ph data[2]=0:5810a000 (fff)
  get Phys(data[n=3+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:5810b000
  ph data[2]=0:5810a000 (1fff)
  get Phys(data[n=3+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:5810c000
  ph data[2]=0:5810a000 (2fff)
  get Phys(data[n=3+3000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:5810d000
  ph data[2]=0:5810a000 (3fff)
  get Phys(data[n=3+4000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:5810e000
  ph data[2]=0:5810a000 (4fff)
  get Phys(data[n=3+5000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:5810f000
  ph data[2]=0:5810a000 (5fff)
  get Phys(data[n=3+6000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:58108000
  ph data[3]=0:58108000 (fff)
  get Phys(data[n=4+1000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:58109000
  set TERM
  ph data[3]=0:58108000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf78019c4
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903f590, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903f610, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b2c
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903f690, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903f690, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f74ea000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:57dfa000
  ph data[0]=0:57dfa000 (fff)
  get Phys(data[n=1+1000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:57df3000
  ph data[1]=0:57df3000 (fff)
  get Phys(data[n=2+1000]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:57df4000
  ph data[1]=0:57df3000 (1fff)
  get Phys(data[n=2+2000]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:57df5000
  ph data[1]=0:57df3000 (2fff)
  get Phys(data[n=2+3000]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:57df6000
  ph data[1]=0:57df3000 (3fff)
  get Phys(data[n=2+4000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:57df7000
  ph data[1]=0:57df3000 (4fff)
  get Phys(data[n=2+5000]=f74f0000)
AtapiVirtToPhysAddr_: f74f0000 -> 00000000:57df8000
  ph data[1]=0:57df3000 (5fff)
  get Phys(data[n=2+6000]=f74f1000)
AtapiVirtToPhysAddr_: f74f1000 -> 00000000:57df9000
  ph data[1]=0:57df3000 (6fff)
  get Phys(data[n=2+7000]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:57e02000
  ph data[2]=0:57e02000 (fff)
  get Phys(data[n=3+1000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:57dfb000
  ph data[3]=0:57dfb000 (fff)
  get Phys(data[n=4+1000]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:57dfc000
  ph data[3]=0:57dfb000 (1fff)
  get Phys(data[n=4+2000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:57dfd000
  ph data[3]=0:57dfb000 (2fff)
  get Phys(data[n=4+3000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:57dfe000
  ph data[3]=0:57dfb000 (3fff)
  get Phys(data[n=4+4000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:57dff000
  ph data[3]=0:57dfb000 (4fff)
  get Phys(data[n=4+5000]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:57e00000
  ph data[3]=0:57dfb000 (5fff)
  get Phys(data[n=4+6000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:57e01000
  set TERM
  ph data[3]=0:57dfb000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903f690, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b2c
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903f710, OrigWordsRequested 0x2b00, DevSize 0x2b
IdeReadWrite (REQ): Starting sector is 3903f710, Number of WORDS 0x2b00, DevSize 0x2b
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f74fa000, count 5600, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:57e0a000
  ph data[0]=0:57e0a000 (fff)
  get Phys(data[n=1+1000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:57e03000
  ph data[1]=0:57e03000 (fff)
  get Phys(data[n=2+1000]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:57e04000
  ph data[1]=0:57e03000 (1fff)
  get Phys(data[n=2+2000]=f74fd000)
AtapiVirtToPhysAddr_: f74fd000 -> 00000000:57e05000
  ph data[1]=0:57e03000 (2fff)
  get Phys(data[n=2+3000]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:57e06000
  ph data[1]=0:57e03000 (3fff)
  get Phys(data[n=2+4000]=f74ff000)
AtapiVirtToPhysAddr_: f74ff000 -> 00000000:57e07000
  set TERM
  ph data[1]=0:57e03000 (45ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903f710, Count 0x2b(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x2, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 2b00, WordsLeft 2b00
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 5600, full size 5600
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903f740, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903f740, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:57d53000
  ph data[0]=0:57d53000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:57d4c000
  ph data[1]=0:57d4c000 (fff)
  get Phys(data[n=2+1000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:57d4d000
  ph data[1]=0:57d4c000 (1fff)
  get Phys(data[n=2+2000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:57d4e000
  ph data[1]=0:57d4c000 (2fff)
  get Phys(data[n=2+3000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:57d4f000
  ph data[1]=0:57d4c000 (3fff)
  get Phys(data[n=2+4000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:57d50000
  ph data[1]=0:57d4c000 (4fff)
  get Phys(data[n=2+5000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:57d51000
  ph data[1]=0:57d4c000 (5fff)
  get Phys(data[n=2+6000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:57d52000
  ph data[1]=0:57d4c000 (6fff)
  get Phys(data[n=2+7000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:57d5b000
  ph data[2]=0:57d5b000 (fff)
  get Phys(data[n=3+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:57d54000
  ph data[3]=0:57d54000 (fff)
  get Phys(data[n=4+1000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:57d55000
  ph data[3]=0:57d54000 (1fff)
  get Phys(data[n=4+2000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:57d56000
  ph data[3]=0:57d54000 (2fff)
  get Phys(data[n=4+3000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:57d57000
  ph data[3]=0:57d54000 (3fff)
  get Phys(data[n=4+4000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:57d58000
  ph data[3]=0:57d54000 (4fff)
  get Phys(data[n=4+5000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:57d59000
  ph data[3]=0:57d54000 (5fff)
  get Phys(data[n=4+6000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:57d5a000
  set TERM
  ph data[3]=0:57d54000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903f740, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903f7c0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903f7c0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:57d63000
  ph data[0]=0:57d63000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:57d5c000
  ph data[1]=0:57d5c000 (fff)
  get Phys(data[n=2+1000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:57d5d000
  ph data[1]=0:57d5c000 (1fff)
  get Phys(data[n=2+2000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:57d5e000
  ph data[1]=0:57d5c000 (2fff)
  get Phys(data[n=2+3000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:57d5f000
  ph data[1]=0:57d5c000 (3fff)
  get Phys(data[n=2+4000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:57d60000
  ph data[1]=0:57d5c000 (4fff)
  get Phys(data[n=2+5000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:57d61000
  ph data[1]=0:57d5c000 (5fff)
  get Phys(data[n=2+6000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:57d62000
  ph data[1]=0:57d5c000 (6fff)
  get Phys(data[n=2+7000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:57d6b000
  ph data[2]=0:57d6b000 (fff)
  get Phys(data[n=3+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:57d64000
  ph data[3]=0:57d64000 (fff)
  get Phys(data[n=4+1000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:57d65000
  ph data[3]=0:57d64000 (1fff)
  get Phys(data[n=4+2000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:57d66000
  ph data[3]=0:57d64000 (2fff)
  get Phys(data[n=4+3000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:57d67000
  ph data[3]=0:57d64000 (3fff)
  get Phys(data[n=4+4000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:57d68000
  ph data[3]=0:57d64000 (4fff)
  get Phys(data[n=4+5000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:57d69000
  ph data[3]=0:57d64000 (5fff)
  get Phys(data[n=4+6000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:57d6a000
  set TERM
  ph data[3]=0:57d64000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520c08
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903f7c0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903f840, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903f840, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:57d73000
  ph data[0]=0:57d73000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:57d6c000
  ph data[1]=0:57d6c000 (fff)
  get Phys(data[n=2+1000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:57d6d000
  ph data[1]=0:57d6c000 (1fff)
  get Phys(data[n=2+2000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:57d6e000
  ph data[1]=0:57d6c000 (2fff)
  get Phys(data[n=2+3000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:57d6f000
  ph data[1]=0:57d6c000 (3fff)
  get Phys(data[n=2+4000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:57d70000
  ph data[1]=0:57d6c000 (4fff)
  get Phys(data[n=2+5000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:57d71000
  ph data[1]=0:57d6c000 (5fff)
  get Phys(data[n=2+6000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:57d72000
  ph data[1]=0:57d6c000 (6fff)
  get Phys(data[n=2+7000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:57d7b000
  ph data[2]=0:57d7b000 (fff)
  get Phys(data[n=3+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:57d74000
  ph data[3]=0:57d74000 (fff)
  get Phys(data[n=4+1000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:57d75000
  ph data[3]=0:57d74000 (1fff)
  get Phys(data[n=4+2000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:57d76000
  ph data[3]=0:57d74000 (2fff)
  get Phys(data[n=4+3000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:57d77000
  ph data[3]=0:57d74000 (3fff)
  get Phys(data[n=4+4000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:57d78000
  ph data[3]=0:57d74000 (4fff)
  get Phys(data[n=4+5000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:57d79000
  ph data[3]=0:57d74000 (5fff)
  get Phys(data[n=4+6000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:57d7a000
  set TERM
  ph data[3]=0:57d74000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903f8c0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903f8c0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:57d83000
  ph data[0]=0:57d83000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:57d7c000
  ph data[1]=0:57d7c000 (fff)
  get Phys(data[n=2+1000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:57d7d000
  ph data[1]=0:57d7c000 (1fff)
  get Phys(data[n=2+2000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:57d7e000
  ph data[1]=0:57d7c000 (2fff)
  get Phys(data[n=2+3000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:57d7f000
  ph data[1]=0:57d7c000 (3fff)
  get Phys(data[n=2+4000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:57d80000
  ph data[1]=0:57d7c000 (4fff)
  get Phys(data[n=2+5000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:57d81000
  ph data[1]=0:57d7c000 (5fff)
  get Phys(data[n=2+6000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:57d82000
  ph data[1]=0:57d7c000 (6fff)
  get Phys(data[n=2+7000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:57d8b000
  ph data[2]=0:57d8b000 (fff)
  get Phys(data[n=3+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:57d84000
  ph data[3]=0:57d84000 (fff)
  get Phys(data[n=4+1000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:57d85000
  ph data[3]=0:57d84000 (1fff)
  get Phys(data[n=4+2000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:57d86000
  ph data[3]=0:57d84000 (2fff)
  get Phys(data[n=4+3000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:57d87000
  ph data[3]=0:57d84000 (3fff)
  get Phys(data[n=4+4000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:57d88000
  ph data[3]=0:57d84000 (4fff)
  get Phys(data[n=4+5000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:57d89000
  ph data[3]=0:57d84000 (5fff)
  get Phys(data[n=4+6000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:57d8a000
  set TERM
  ph data[3]=0:57d84000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520bf0
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903f840, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903f8c0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903f940, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903f940, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:5797b000
  ph data[0]=0:5797b000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:5797d000
  ph data[1]=0:5797d000 (fff)
  get Phys(data[n=2+1000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:57976000
  ph data[2]=0:57976000 (fff)
  get Phys(data[n=3+1000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:57977000
  ph data[2]=0:57976000 (1fff)
  get Phys(data[n=3+2000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:57978000
  ph data[2]=0:57976000 (2fff)
  get Phys(data[n=3+3000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:57979000
  ph data[2]=0:57976000 (3fff)
  get Phys(data[n=3+4000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:5797a000
  ph data[2]=0:57976000 (4fff)
  get Phys(data[n=3+5000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:57983000
  ph data[3]=0:57983000 (fff)
  get Phys(data[n=4+1000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:57984000
  ph data[3]=0:57983000 (1fff)
  get Phys(data[n=4+2000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:57985000
  ph data[3]=0:57983000 (2fff)
  get Phys(data[n=4+3000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:5797e000
  ph data[4]=0:5797e000 (fff)
  get Phys(data[n=5+1000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:5797f000
  ph data[4]=0:5797e000 (1fff)
  get Phys(data[n=5+2000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:57980000
  ph data[4]=0:5797e000 (2fff)
  get Phys(data[n=5+3000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:57981000
  ph data[4]=0:5797e000 (3fff)
  get Phys(data[n=5+4000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:57982000
  ph data[4]=0:5797e000 (4fff)
  get Phys(data[n=5+5000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:5798b000
  set TERM
  ph data[5]=0:5798b000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903f940, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x6, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903f9c0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903f9c0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:5798c000
  ph data[0]=0:5798c000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:5798d000
  ph data[0]=0:5798c000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:57986000
  ph data[1]=0:57986000 (fff)
  get Phys(data[n=2+1000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:57987000
  ph data[1]=0:57986000 (1fff)
  get Phys(data[n=2+2000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:57988000
  ph data[1]=0:57986000 (2fff)
  get Phys(data[n=2+3000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:57989000
  ph data[1]=0:57986000 (3fff)
  get Phys(data[n=2+4000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:5798a000
  ph data[1]=0:57986000 (4fff)
  get Phys(data[n=2+5000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:57993000
  ph data[2]=0:57993000 (fff)
  get Phys(data[n=3+1000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:57994000
  ph data[2]=0:57993000 (1fff)
  get Phys(data[n=3+2000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:57995000
  ph data[2]=0:57993000 (2fff)
  get Phys(data[n=3+3000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:5798e000
  ph data[3]=0:5798e000 (fff)
  get Phys(data[n=4+1000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:5798f000
  ph data[3]=0:5798e000 (1fff)
  get Phys(data[n=4+2000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:57990000
  ph data[3]=0:5798e000 (2fff)
  get Phys(data[n=4+3000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:57991000
  ph data[3]=0:5798e000 (3fff)
  get Phys(data[n=4+4000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:57992000
  ph data[3]=0:5798e000 (4fff)
  get Phys(data[n=4+5000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:5799b000
  set TERM
  ph data[4]=0:5799b000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903fa40, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903fa40, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:5799c000
  ph data[0]=0:5799c000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:5799d000
  ph data[0]=0:5799c000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:57996000
  ph data[1]=0:57996000 (fff)
  get Phys(data[n=2+1000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:57997000
  ph data[1]=0:57996000 (1fff)
  get Phys(data[n=2+2000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:57998000
  ph data[1]=0:57996000 (2fff)
  get Phys(data[n=2+3000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:57999000
  ph data[1]=0:57996000 (3fff)
  get Phys(data[n=2+4000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:5799a000
  ph data[1]=0:57996000 (4fff)
  get Phys(data[n=2+5000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:579a3000
  ph data[2]=0:579a3000 (fff)
  get Phys(data[n=3+1000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:579a4000
  ph data[2]=0:579a3000 (1fff)
  get Phys(data[n=3+2000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:579a5000
  ph data[2]=0:579a3000 (2fff)
  get Phys(data[n=3+3000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:5799e000
  ph data[3]=0:5799e000 (fff)
  get Phys(data[n=4+1000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:5799f000
  ph data[3]=0:5799e000 (1fff)
  get Phys(data[n=4+2000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:579a0000
  ph data[3]=0:5799e000 (2fff)
  get Phys(data[n=4+3000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:579a1000
  ph data[3]=0:5799e000 (3fff)
  get Phys(data[n=4+4000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:579a2000
  ph data[3]=0:5799e000 (4fff)
  get Phys(data[n=4+5000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:579ab000
  set TERM
  ph data[4]=0:579ab000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903f9c0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x5, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903fac0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903fac0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:579ac000
  ph data[0]=0:579ac000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:579ad000
  ph data[0]=0:579ac000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:579a6000
  ph data[1]=0:579a6000 (fff)
  get Phys(data[n=2+1000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:579a7000
  ph data[1]=0:579a6000 (1fff)
  get Phys(data[n=2+2000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:579a8000
  ph data[1]=0:579a6000 (2fff)
  get Phys(data[n=2+3000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:579a9000
  ph data[1]=0:579a6000 (3fff)
  get Phys(data[n=2+4000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:579aa000
  ph data[1]=0:579a6000 (4fff)
  get Phys(data[n=2+5000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:579b3000
  ph data[2]=0:579b3000 (fff)
  get Phys(data[n=3+1000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:579b4000
  ph data[2]=0:579b3000 (1fff)
  get Phys(data[n=3+2000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:579b5000
  ph data[2]=0:579b3000 (2fff)
  get Phys(data[n=3+3000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:579ae000
  ph data[3]=0:579ae000 (fff)
  get Phys(data[n=4+1000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:579af000
  ph data[3]=0:579ae000 (1fff)
  get Phys(data[n=4+2000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:579b0000
  ph data[3]=0:579ae000 (2fff)
  get Phys(data[n=4+3000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:579b1000
  ph data[3]=0:579ae000 (3fff)
  get Phys(data[n=4+4000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:579b2000
  ph data[3]=0:579ae000 (4fff)
  get Phys(data[n=4+5000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:579bb000
  set TERM
  ph data[4]=0:579bb000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903fa40, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x5, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903fac0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x5, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b2c
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903fb40, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903fb40, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f74ec000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:57694000
  ph data[0]=0:57694000 (fff)
  get Phys(data[n=1+1000]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:57695000
  ph data[0]=0:57694000 (1fff)
  get Phys(data[n=1+2000]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:57696000
  ph data[0]=0:57694000 (2fff)
  get Phys(data[n=1+3000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:57697000
  ph data[0]=0:57694000 (3fff)
  get Phys(data[n=1+4000]=f74f0000)
AtapiVirtToPhysAddr_: f74f0000 -> 00000000:57698000
  ph data[0]=0:57694000 (4fff)
  get Phys(data[n=1+5000]=f74f1000)
AtapiVirtToPhysAddr_: f74f1000 -> 00000000:57699000
  ph data[0]=0:57694000 (5fff)
  get Phys(data[n=1+6000]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:5769a000
  ph data[0]=0:57694000 (6fff)
  get Phys(data[n=1+7000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:5769b000
  ph data[0]=0:57694000 (7fff)
  get Phys(data[n=1+8000]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:5769c000
  ph data[0]=0:57694000 (8fff)
  get Phys(data[n=1+9000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:5769d000
  ph data[0]=0:57694000 (9fff)
  get Phys(data[n=1+a000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:5769e000
  ph data[0]=0:57694000 (afff)
  get Phys(data[n=1+b000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:5769f000
  ph data[0]=0:57694000 (bfff)
  get Phys(data[n=1+c000]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:576a0000
  ph data[0]=0:57694000 (cfff)
  get Phys(data[n=1+d000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:576a1000
  ph data[0]=0:57694000 (dfff)
  get Phys(data[n=1+e000]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:576a2000
  ph data[0]=0:57694000 (efff)
  get Phys(data[n=1+f000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:576a3000
  set TERM
  ph data[0]=0:57694000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903fb40, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x1, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b2c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903fbc0, OrigWordsRequested 0x1300, DevSize 0x13
IdeReadWrite (REQ): Starting sector is 3903fbc0, Number of WORDS 0x1300, DevSize 0x13
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f74fc000, count 2600, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:576a4000
  ph data[0]=0:576a4000 (fff)
  get Phys(data[n=1+1000]=f74fd000)
AtapiVirtToPhysAddr_: f74fd000 -> 00000000:576a5000
  ph data[0]=0:576a4000 (1fff)
  get Phys(data[n=1+2000]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:576a6000
  set TERM
  ph data[0]=0:576a4000 (25ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903fbc0, Count 0x13(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1300, WordsLeft 1300
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2600, full size 2600
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903fbe0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903fbe0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:57606000
  ph data[0]=0:57606000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:57607000
  ph data[0]=0:57606000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:57608000
  ph data[0]=0:57606000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:57609000
  ph data[0]=0:57606000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:5760a000
  ph data[0]=0:57606000 (4fff)
  get Phys(data[n=1+5000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:57603000
  ph data[1]=0:57603000 (fff)
  get Phys(data[n=2+1000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:57604000
  ph data[1]=0:57603000 (1fff)
  get Phys(data[n=2+2000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:57605000
  ph data[1]=0:57603000 (2fff)
  get Phys(data[n=2+3000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:5760e000
  ph data[2]=0:5760e000 (fff)
  get Phys(data[n=3+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:5760f000
  ph data[2]=0:5760e000 (1fff)
  get Phys(data[n=3+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:57610000
  ph data[2]=0:5760e000 (2fff)
  get Phys(data[n=3+3000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:57611000
  ph data[2]=0:5760e000 (3fff)
  get Phys(data[n=3+4000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:57612000
  ph data[2]=0:5760e000 (4fff)
  get Phys(data[n=3+5000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:5760b000
  ph data[3]=0:5760b000 (fff)
  get Phys(data[n=4+1000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:5760c000
  ph data[3]=0:5760b000 (1fff)
  get Phys(data[n=4+2000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:5760d000
  set TERM
  ph data[3]=0:5760b000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903fbe0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903fc60, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903fc60, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:57616000
  ph data[0]=0:57616000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:57617000
  ph data[0]=0:57616000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:57618000
  ph data[0]=0:57616000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:57619000
  ph data[0]=0:57616000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:5761a000
  ph data[0]=0:57616000 (4fff)
  get Phys(data[n=1+5000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:57613000
  ph data[1]=0:57613000 (fff)
  get Phys(data[n=2+1000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:57614000
  ph data[1]=0:57613000 (1fff)
  get Phys(data[n=2+2000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:57615000
  ph data[1]=0:57613000 (2fff)
  get Phys(data[n=2+3000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:5761e000
  ph data[2]=0:5761e000 (fff)
  get Phys(data[n=3+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:5761f000
  ph data[2]=0:5761e000 (1fff)
  get Phys(data[n=3+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:57620000
  ph data[2]=0:5761e000 (2fff)
  get Phys(data[n=3+3000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:57621000
  ph data[2]=0:5761e000 (3fff)
  get Phys(data[n=3+4000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:57622000
  ph data[2]=0:5761e000 (4fff)
  get Phys(data[n=3+5000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:5761b000
  ph data[3]=0:5761b000 (fff)
  get Phys(data[n=4+1000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:5761c000
  ph data[3]=0:5761b000 (1fff)
  get Phys(data[n=4+2000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:5761d000
  set TERM
  ph data[3]=0:5761b000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903fce0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903fce0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:57626000
  ph data[0]=0:57626000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:57627000
  ph data[0]=0:57626000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:57628000
  ph data[0]=0:57626000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:57629000
  ph data[0]=0:57626000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:5762a000
  ph data[0]=0:57626000 (4fff)
  get Phys(data[n=1+5000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:57623000
  ph data[1]=0:57623000 (fff)
  get Phys(data[n=2+1000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:57624000
  ph data[1]=0:57623000 (1fff)
  get Phys(data[n=2+2000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:57625000
  ph data[1]=0:57623000 (2fff)
  get Phys(data[n=2+3000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:5762e000
  ph data[2]=0:5762e000 (fff)
  get Phys(data[n=3+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:5762f000
  ph data[2]=0:5762e000 (1fff)
  get Phys(data[n=3+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:57630000
  ph data[2]=0:5762e000 (2fff)
  get Phys(data[n=3+3000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:57631000
  ph data[2]=0:5762e000 (3fff)
  get Phys(data[n=3+4000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:57632000
  ph data[2]=0:5762e000 (4fff)
  get Phys(data[n=3+5000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:5762b000
  ph data[3]=0:5762b000 (fff)
  get Phys(data[n=4+1000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:5762c000
  ph data[3]=0:5762b000 (1fff)
  get Phys(data[n=4+2000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:5762d000
  set TERM
  ph data[3]=0:5762b000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903fd60, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903fd60, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:57636000
  ph data[0]=0:57636000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:57637000
  ph data[0]=0:57636000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:57638000
  ph data[0]=0:57636000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:57639000
  ph data[0]=0:57636000 (3fff)
  get Phys(data[n=1+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:5763a000
  ph data[0]=0:57636000 (4fff)
  get Phys(data[n=1+5000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:57633000
  ph data[1]=0:57633000 (fff)
  get Phys(data[n=2+1000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:57634000
  ph data[1]=0:57633000 (1fff)
  get Phys(data[n=2+2000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:57635000
  ph data[1]=0:57633000 (2fff)
  get Phys(data[n=2+3000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:5763e000
  ph data[2]=0:5763e000 (fff)
  get Phys(data[n=3+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:5763f000
  ph data[2]=0:5763e000 (1fff)
  get Phys(data[n=3+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:57640000
  ph data[2]=0:5763e000 (2fff)
  get Phys(data[n=3+3000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:57641000
  ph data[2]=0:5763e000 (3fff)
  get Phys(data[n=3+4000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:57642000
  ph data[2]=0:5763e000 (4fff)
  get Phys(data[n=3+5000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:5763b000
  ph data[3]=0:5763b000 (fff)
  get Phys(data[n=4+1000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:5763c000
  ph data[3]=0:5763b000 (1fff)
  get Phys(data[n=4+2000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:5763d000
  set TERM
  ph data[3]=0:5763b000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903fc60, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903fce0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903fd60, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520ab4
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3903ffe0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3903ffe0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f74d8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f74d8000)
AtapiVirtToPhysAddr_: f74d8000 -> 00000000:57256000
  ph data[0]=0:57256000 (fff)
  get Phys(data[n=1+1000]=f74d9000)
AtapiVirtToPhysAddr_: f74d9000 -> 00000000:57257000
  ph data[0]=0:57256000 (1fff)
  get Phys(data[n=1+2000]=f74da000)
AtapiVirtToPhysAddr_: f74da000 -> 00000000:57250000
  ph data[1]=0:57250000 (fff)
  get Phys(data[n=2+1000]=f74db000)
AtapiVirtToPhysAddr_: f74db000 -> 00000000:57251000
  ph data[1]=0:57250000 (1fff)
  get Phys(data[n=2+2000]=f74dc000)
AtapiVirtToPhysAddr_: f74dc000 -> 00000000:57252000
  ph data[1]=0:57250000 (2fff)
  get Phys(data[n=2+3000]=f74dd000)
AtapiVirtToPhysAddr_: f74dd000 -> 00000000:57253000
  ph data[1]=0:57250000 (3fff)
  get Phys(data[n=2+4000]=f74de000)
AtapiVirtToPhysAddr_: f74de000 -> 00000000:57254000
  ph data[1]=0:57250000 (4fff)
  get Phys(data[n=2+5000]=f74df000)
AtapiVirtToPhysAddr_: f74df000 -> 00000000:57255000
  ph data[1]=0:57250000 (5fff)
  get Phys(data[n=2+6000]=f74e0000)
AtapiVirtToPhysAddr_: f74e0000 -> 00000000:5725e000
  ph data[2]=0:5725e000 (fff)
  get Phys(data[n=3+1000]=f74e1000)
AtapiVirtToPhysAddr_: f74e1000 -> 00000000:5725f000
  ph data[2]=0:5725e000 (1fff)
  get Phys(data[n=3+2000]=f74e2000)
AtapiVirtToPhysAddr_: f74e2000 -> 00000000:57258000
  ph data[3]=0:57258000 (fff)
  get Phys(data[n=4+1000]=f74e3000)
AtapiVirtToPhysAddr_: f74e3000 -> 00000000:57259000
  ph data[3]=0:57258000 (1fff)
  get Phys(data[n=4+2000]=f74e4000)
AtapiVirtToPhysAddr_: f74e4000 -> 00000000:5725a000
  ph data[3]=0:57258000 (2fff)
  get Phys(data[n=4+3000]=f74e5000)
AtapiVirtToPhysAddr_: f74e5000 -> 00000000:5725b000
  ph data[3]=0:57258000 (3fff)
  get Phys(data[n=4+4000]=f74e6000)
AtapiVirtToPhysAddr_: f74e6000 -> 00000000:5725c000
  ph data[3]=0:57258000 (4fff)
  get Phys(data[n=4+5000]=f74e7000)
AtapiVirtToPhysAddr_: f74e7000 -> 00000000:5725d000
  set TERM
  ph data[3]=0:57258000 (5fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3903ffe0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaRTopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39042460, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39042460, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:52b16000
  ph data[0]=0:52b16000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:52b17000
  ph data[0]=0:52b16000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:52b18000
  ph data[0]=0:52b16000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:52b19000
  ph data[0]=0:52b16000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:52b1a000
  ph data[0]=0:52b16000 (4fff)
  get Phys(data[n=1+5000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:52b1b000
  ph data[0]=0:52b16000 (5fff)
  get Phys(data[n=1+6000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:52b14000
  ph data[1]=0:52b14000 (fff)
  get Phys(data[n=2+1000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:52b15000
  ph data[1]=0:52b14000 (1fff)
  get Phys(data[n=2+2000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:52b1e000
  ph data[2]=0:52b1e000 (fff)
  get Phys(data[n=3+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:52b1f000
  ph data[2]=0:52b1e000 (1fff)
  get Phys(data[n=3+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:52b20000
  ph data[2]=0:52b1e000 (2fff)
  get Phys(data[n=3+3000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:52b21000
  ph data[2]=0:52b1e000 (3fff)
  get Phys(data[n=3+4000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:52b22000
  ph data[2]=0:52b1e000 (4fff)
  get Phys(data[n=3+5000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:52b23000
  ph data[2]=0:52b1e000 (5fff)
  get Phys(data[n=3+6000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:52b1c000
  ph data[3]=0:52b1c000 (fff)
  get Phys(data[n=4+1000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:52b1d000
  set TERM
  ph data[3]=0:52b1c000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39042460, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390424e0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390424e0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:52b26000
  ph data[0]=0:52b26000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:52b27000
  ph data[0]=0:52b26000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:52b28000
  ph data[0]=0:52b26000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:52b29000
  ph data[0]=0:52b26000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:52b2a000
  ph data[0]=0:52b26000 (4fff)
  get Phys(data[n=1+5000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:52b2b000
  ph data[0]=0:52b26000 (5fff)
  get Phys(data[n=1+6000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:52b24000
  ph data[1]=0:52b24000 (fff)
  get Phys(data[n=2+1000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:52b25000
  ph data[1]=0:52b24000 (1fff)
  get Phys(data[n=2+2000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:52b2e000
  ph data[2]=0:52b2e000 (fff)
  get Phys(data[n=3+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:52b2f000
  ph data[2]=0:52b2e000 (1fff)
  get Phys(data[n=3+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:52b30000
  ph data[2]=0:52b2e000 (2fff)
  get Phys(data[n=3+3000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:52b31000
  ph data[2]=0:52b2e000 (3fff)
  get Phys(data[n=3+4000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:52b32000
  ph data[2]=0:52b2e000 (4fff)
  get Phys(data[n=3+5000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:52b33000
  ph data[2]=0:52b2e000 (5fff)
  get Phys(data[n=3+6000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:52b2c000
  ph data[3]=0:52b2c000 (fff)
  get Phys(data[n=4+1000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:52b2d000
  set TERM
  ph data[3]=0:52b2c000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520bdc
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390424e0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39042560, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39042560, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:52b36000
  ph data[0]=0:52b36000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:52b37000
  ph data[0]=0:52b36000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:52b38000
  ph data[0]=0:52b36000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:52b39000
  ph data[0]=0:52b36000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:52b3a000
  ph data[0]=0:52b36000 (4fff)
  get Phys(data[n=1+5000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:52b3b000
  ph data[0]=0:52b36000 (5fff)
  get Phys(data[n=1+6000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:52b34000
  ph data[1]=0:52b34000 (fff)
  get Phys(data[n=2+1000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:52b35000
  ph data[1]=0:52b34000 (1fff)
  get Phys(data[n=2+2000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:52b3e000
  ph data[2]=0:52b3e000 (fff)
  get Phys(data[n=3+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:52b3f000
  ph data[2]=0:52b3e000 (1fff)
  get Phys(data[n=3+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:52b40000
  ph data[2]=0:52b3e000 (2fff)
  get Phys(data[n=3+3000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:52b41000
  ph data[2]=0:52b3e000 (3fff)
  get Phys(data[n=3+4000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:52b42000
  ph data[2]=0:52b3e000 (4fff)
  get Phys(data[n=3+5000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:52b43000
  ph data[2]=0:52b3e000 (5fff)
  get Phys(data[n=3+6000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:52b3c000
  ph data[3]=0:52b3c000 (fff)
  get Phys(data[n=4+1000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:52b3d000
  set TERM
  ph data[3]=0:52b3c000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390425e0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390425e0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:52b46000
  ph data[0]=0:52b46000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:52b47000
  ph data[0]=0:52b46000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:52b48000
  ph data[0]=0:52b46000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:52b49000
  ph data[0]=0:52b46000 (3fff)
  get Phys(data[n=1+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:52b4a000
  ph data[0]=0:52b46000 (4fff)
  get Phys(data[n=1+5000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:52b4b000
  ph data[0]=0:52b46000 (5fff)
  get Phys(data[n=1+6000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:52b44000
  ph data[1]=0:52b44000 (fff)
  get Phys(data[n=2+1000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:52b45000
  ph data[1]=0:52b44000 (1fff)
  get Phys(data[n=2+2000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:52b4e000
  ph data[2]=0:52b4e000 (fff)
  get Phys(data[n=3+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:52b4f000
  ph data[2]=0:52b4e000 (1fff)
  get Phys(data[n=3+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:52b50000
  ph data[2]=0:52b4e000 (2fff)
  get Phys(data[n=3+3000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:52b51000
  ph data[2]=0:52b4e000 (3fff)
  get Phys(data[n=3+4000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:52b52000
  ph data[2]=0:52b4e000 (4fff)
  get Phys(data[n=3+5000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:52b53000
  ph data[2]=0:52b4e000 (5fff)
  get Phys(data[n=3+6000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:52b4c000
  ph data[3]=0:52b4c000 (fff)
  get Phys(data[n=4+1000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:52b4d000
  set TERM
  ph data[3]=0:52b4c000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39042560, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390425e0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b4c
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39042660, OrigWordsRequested 0x4300, DevSize 0x43
IdeReadWrite (REQ): Starting sector is 39042660, Number of WORDS 0x4300, DevSize 0x43
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f74f6000, count 8600, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:51dee000
  ph data[0]=0:51dee000 (fff)
  get Phys(data[n=1+1000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:51def000
  ph data[0]=0:51dee000 (1fff)
  get Phys(data[n=1+2000]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:51df0000
  ph data[0]=0:51dee000 (2fff)
  get Phys(data[n=1+3000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:51df1000
  ph data[0]=0:51dee000 (3fff)
  get Phys(data[n=1+4000]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:51dea000
  ph data[1]=0:51dea000 (fff)
  get Phys(data[n=2+1000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:51deb000
  ph data[1]=0:51dea000 (1fff)
  get Phys(data[n=2+2000]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:51dec000
  ph data[1]=0:51dea000 (2fff)
  get Phys(data[n=2+3000]=f74fd000)
AtapiVirtToPhysAddr_: f74fd000 -> 00000000:51ded000
  ph data[1]=0:51dea000 (3fff)
  get Phys(data[n=2+4000]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:51df6000
  set TERM
  ph data[2]=0:51df6000 (5ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39042660, Count 0x43(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x3, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 4300, WordsLeft 4300
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 8600, full size 8600
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390426b0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390426b0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:51dbf000
  ph data[0]=0:51dbf000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:51dc0000
  ph data[0]=0:51dbf000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:51dc1000
  ph data[0]=0:51dbf000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:51dc2000
  ph data[0]=0:51dbf000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:51dbb000
  ph data[1]=0:51dbb000 (fff)
  get Phys(data[n=2+1000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:51dbc000
  ph data[1]=0:51dbb000 (1fff)
  get Phys(data[n=2+2000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:51dbd000
  ph data[1]=0:51dbb000 (2fff)
  get Phys(data[n=2+3000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:51dbe000
  ph data[1]=0:51dbb000 (3fff)
  get Phys(data[n=2+4000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:51dc7000
  ph data[2]=0:51dc7000 (fff)
  get Phys(data[n=3+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:51dc8000
  ph data[2]=0:51dc7000 (1fff)
  get Phys(data[n=3+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:51dc9000
  ph data[2]=0:51dc7000 (2fff)
  get Phys(data[n=3+3000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:51dca000
  ph data[2]=0:51dc7000 (3fff)
  get Phys(data[n=3+4000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:51dc3000
  ph data[3]=0:51dc3000 (fff)
  get Phys(data[n=4+1000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:51dc4000
  ph data[3]=0:51dc3000 (1fff)
  get Phys(data[n=4+2000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:51dc5000
  ph data[3]=0:51dc3000 (2fff)
  get Phys(data[n=4+3000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:51dc6000
  set TERM
  ph data[3]=0:51dc3000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390426b0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39042730, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39042730, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:51dcf000
  ph data[0]=0:51dcf000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:51dd0000
  ph data[0]=0:51dcf000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:51dd1000
  ph data[0]=0:51dcf000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:51dd2000
  ph data[0]=0:51dcf000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:51dcb000
  ph data[1]=0:51dcb000 (fff)
  get Phys(data[n=2+1000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:51dcc000
  ph data[1]=0:51dcb000 (1fff)
  get Phys(data[n=2+2000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:51dcd000
  ph data[1]=0:51dcb000 (2fff)
  get Phys(data[n=2+3000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:51dce000
  ph data[1]=0:51dcb000 (3fff)
  get Phys(data[n=2+4000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:51dd7000
  ph data[2]=0:51dd7000 (fff)
  get Phys(data[n=3+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:51dd8000
  ph data[2]=0:51dd7000 (1fff)
  get Phys(data[n=3+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:51dd9000
  ph data[2]=0:51dd7000 (2fff)
  get Phys(data[n=3+3000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:51dda000
  ph data[2]=0:51dd7000 (3fff)
  get Phys(data[n=3+4000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:51dd3000
  ph data[3]=0:51dd3000 (fff)
  get Phys(data[n=4+1000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:51dd4000
  ph data[3]=0:51dd3000 (1fff)
  get Phys(data[n=4+2000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:51dd5000
  ph data[3]=0:51dd3000 (2fff)
  get Phys(data[n=4+3000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:51dd6000
  set TERM
  ph data[3]=0:51dd3000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390427b0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390427b0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:51ddf000
  ph data[0]=0:51ddf000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:51de0000
  ph data[0]=0:51ddf000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:51de1000
  ph data[0]=0:51ddf000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:51de2000
  ph data[0]=0:51ddf000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:51ddb000
  ph data[1]=0:51ddb000 (fff)
  get Phys(data[n=2+1000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:51ddc000
  ph data[1]=0:51ddb000 (1fff)
  get Phys(data[n=2+2000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:51ddd000
  ph data[1]=0:51ddb000 (2fff)
  get Phys(data[n=2+3000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:51dde000
  ph data[1]=0:51ddb000 (3fff)
  get Phys(data[n=2+4000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:51de7000
  ph data[2]=0:51de7000 (fff)
  get Phys(data[n=3+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:51de8000
  ph data[2]=0:51de7000 (1fff)
  get Phys(data[n=3+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:51de9000
  ph data[2]=0:51de7000 (2fff)
  get Phys(data[n=3+3000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:51e2a000
  ph data[3]=0:51e2a000 (fff)
  get Phys(data[n=4+1000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:51de3000
  ph data[4]=0:51de3000 (fff)
  get Phys(data[n=5+1000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:51de4000
  ph data[4]=0:51de3000 (1fff)
  get Phys(data[n=5+2000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:51de5000
  ph data[4]=0:51de3000 (2fff)
  get Phys(data[n=5+3000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:51de6000
  set TERM
  ph data[4]=0:51de3000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39042730, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39042830, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39042830, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:51e2f000
  ph data[0]=0:51e2f000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:51e30000
  ph data[0]=0:51e2f000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:51e31000
  ph data[0]=0:51e2f000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:51e32000
  ph data[0]=0:51e2f000 (3fff)
  get Phys(data[n=1+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:51e2b000
  ph data[1]=0:51e2b000 (fff)
  get Phys(data[n=2+1000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:51e2c000
  ph data[1]=0:51e2b000 (1fff)
  get Phys(data[n=2+2000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:51e2d000
  ph data[1]=0:51e2b000 (2fff)
  get Phys(data[n=2+3000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:51e2e000
  ph data[1]=0:51e2b000 (3fff)
  get Phys(data[n=2+4000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:51e37000
  ph data[2]=0:51e37000 (fff)
  get Phys(data[n=3+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:51e38000
  ph data[2]=0:51e37000 (1fff)
  get Phys(data[n=3+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:51e39000
  ph data[2]=0:51e37000 (2fff)
  get Phys(data[n=3+3000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:51e3a000
  ph data[2]=0:51e37000 (3fff)
  get Phys(data[n=3+4000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:51e33000
  ph data[3]=0:51e33000 (fff)
  get Phys(data[n=4+1000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:51e34000
  ph data[3]=0:51e33000 (1fff)
  get Phys(data[n=4+2000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:51e35000
  ph data[3]=0:51e33000 (2fff)
  get Phys(data[n=4+3000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:51e36000
  set TERM
  ph data[3]=0:51e33000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520bf0
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390427b0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x5, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39042830, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b4c
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390428b0, OrigWordsRequested 0x4100, DevSize 0x41
IdeReadWrite (REQ): Starting sector is 390428b0, Number of WORDS 0x4100, DevSize 0x41
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f74f6000, count 8200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:51ba8000
  ph data[0]=0:51ba8000 (fff)
  get Phys(data[n=1+1000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:51ba9000
  ph data[0]=0:51ba8000 (1fff)
  get Phys(data[n=1+2000]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:51baa000
  ph data[0]=0:51ba8000 (2fff)
  get Phys(data[n=1+3000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:51bab000
  ph data[0]=0:51ba8000 (3fff)
  get Phys(data[n=1+4000]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:51bac000
  ph data[0]=0:51ba8000 (4fff)
  get Phys(data[n=1+5000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:51bad000
  ph data[0]=0:51ba8000 (5fff)
  get Phys(data[n=1+6000]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:51ba6000
  ph data[1]=0:51ba6000 (fff)
  get Phys(data[n=2+1000]=f74fd000)
AtapiVirtToPhysAddr_: f74fd000 -> 00000000:51ba7000
  ph data[1]=0:51ba6000 (1fff)
  get Phys(data[n=2+2000]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:51bb0000
  set TERM
  ph data[2]=0:51bb0000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390428b0, Count 0x41(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x3, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 4100, WordsLeft 4100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 8200, full size 8200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39042900, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39042900, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:51b89000
  ph data[0]=0:51b89000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:51b8a000
  ph data[0]=0:51b89000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:51b8b000
  ph data[0]=0:51b89000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:51b8c000
  ph data[0]=0:51b89000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:51b85000
  ph data[1]=0:51b85000 (fff)
  get Phys(data[n=2+1000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:51b86000
  ph data[1]=0:51b85000 (1fff)
  get Phys(data[n=2+2000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:51b87000
  ph data[1]=0:51b85000 (2fff)
  get Phys(data[n=2+3000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:51b88000
  ph data[1]=0:51b85000 (3fff)
  get Phys(data[n=2+4000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:51b91000
  ph data[2]=0:51b91000 (fff)
  get Phys(data[n=3+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:51b92000
  ph data[2]=0:51b91000 (1fff)
  get Phys(data[n=3+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:51b93000
  ph data[2]=0:51b91000 (2fff)
  get Phys(data[n=3+3000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:51b94000
  ph data[2]=0:51b91000 (3fff)
  get Phys(data[n=3+4000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:51b8d000
  ph data[3]=0:51b8d000 (fff)
  get Phys(data[n=4+1000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:51b8e000
  ph data[3]=0:51b8d000 (1fff)
  get Phys(data[n=4+2000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:51b8f000
  ph data[3]=0:51b8d000 (2fff)
  get Phys(data[n=4+3000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:51b90000
  set TERM
  ph data[3]=0:51b8d000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39042900, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39042980, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39042980, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:51b99000
  ph data[0]=0:51b99000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:51b9a000
  ph data[0]=0:51b99000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:51b9b000
  ph data[0]=0:51b99000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:51b9c000
  ph data[0]=0:51b99000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:51b95000
  ph data[1]=0:51b95000 (fff)
  get Phys(data[n=2+1000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:51b96000
  ph data[1]=0:51b95000 (1fff)
  get Phys(data[n=2+2000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:51b97000
  ph data[1]=0:51b95000 (2fff)
  get Phys(data[n=2+3000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:51b98000
  ph data[1]=0:51b95000 (3fff)
  get Phys(data[n=2+4000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:51ba1000
  ph data[2]=0:51ba1000 (fff)
  get Phys(data[n=3+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:51ba2000
  ph data[2]=0:51ba1000 (1fff)
  get Phys(data[n=3+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:51ba3000
  ph data[2]=0:51ba1000 (2fff)
  get Phys(data[n=3+3000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:51ba4000
  ph data[2]=0:51ba1000 (3fff)
  get Phys(data[n=3+4000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:51b9d000
  ph data[3]=0:51b9d000 (fff)
  get Phys(data[n=4+1000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:51b9e000
  ph data[3]=0:51b9d000 (1fff)
  get Phys(data[n=4+2000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:51be7000
  ph data[4]=0:51be7000 (fff)
  get Phys(data[n=5+1000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:51ba0000
  set TERM
  ph data[5]=0:51ba0000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39042a00, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39042a00, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:51be9000
  ph data[0]=0:51be9000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:51bea000
  ph data[0]=0:51be9000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:51beb000
  ph data[0]=0:51be9000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:51bec000
  ph data[0]=0:51be9000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:51ba5000
  ph data[1]=0:51ba5000 (fff)
  get Phys(data[n=2+1000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:51be6000
  ph data[2]=0:51be6000 (fff)
  get Phys(data[n=3+1000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:51bef000
  ph data[3]=0:51bef000 (fff)
  get Phys(data[n=4+1000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:51be8000
  ph data[4]=0:51be8000 (fff)
  get Phys(data[n=5+1000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:51bf1000
  ph data[5]=0:51bf1000 (fff)
  get Phys(data[n=6+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:51bf2000
  ph data[5]=0:51bf1000 (1fff)
  get Phys(data[n=6+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:51bf3000
  ph data[5]=0:51bf1000 (2fff)
  get Phys(data[n=6+3000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:51bf4000
  ph data[5]=0:51bf1000 (3fff)
  get Phys(data[n=6+4000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:51bed000
  ph data[6]=0:51bed000 (fff)
  get Phys(data[n=7+1000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:51bee000
  ph data[6]=0:51bed000 (1fff)
  get Phys(data[n=7+2000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:51bf7000
  ph data[7]=0:51bf7000 (fff)
  get Phys(data[n=8+1000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:51bf0000
  set TERM
  ph data[8]=0:51bf0000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520bf0
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39042980, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x6, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39042a80, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39042a80, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:51bf9000
  ph data[0]=0:51bf9000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:51bfa000
  ph data[0]=0:51bf9000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:51bfb000
  ph data[0]=0:51bf9000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:51bfc000
  ph data[0]=0:51bf9000 (3fff)
  get Phys(data[n=1+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:51bf5000
  ph data[1]=0:51bf5000 (fff)
  get Phys(data[n=2+1000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:51bf6000
  ph data[1]=0:51bf5000 (1fff)
  get Phys(data[n=2+2000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:51bff000
  ph data[2]=0:51bff000 (fff)
  get Phys(data[n=3+1000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:51bf8000
  ph data[3]=0:51bf8000 (fff)
  get Phys(data[n=4+1000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:51c01000
  ph data[4]=0:51c01000 (fff)
  get Phys(data[n=5+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:51c02000
  ph data[4]=0:51c01000 (1fff)
  get Phys(data[n=5+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:51c03000
  ph data[4]=0:51c01000 (2fff)
  get Phys(data[n=5+3000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:51c04000
  ph data[4]=0:51c01000 (3fff)
  get Phys(data[n=5+4000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:51bfd000
  ph data[5]=0:51bfd000 (fff)
  get Phys(data[n=6+1000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:51bfe000
  ph data[5]=0:51bfd000 (1fff)
  get Phys(data[n=6+2000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:51c07000
  ph data[6]=0:51c07000 (fff)
  get Phys(data[n=7+1000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:51c00000
  set TERM
  ph data[7]=0:51c00000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39042a00, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x9, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39042a80, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x8, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520afc
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39042b00, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39042b00, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f74e0000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f74e0000)
AtapiVirtToPhysAddr_: f74e0000 -> 00000000:517b9000
  ph data[0]=0:517b9000 (fff)
  get Phys(data[n=1+1000]=f74e1000)
AtapiVirtToPhysAddr_: f74e1000 -> 00000000:517ba000
  ph data[0]=0:517b9000 (1fff)
  get Phys(data[n=1+2000]=f74e2000)
AtapiVirtToPhysAddr_: f74e2000 -> 00000000:517bb000
  ph data[0]=0:517b9000 (2fff)
  get Phys(data[n=1+3000]=f74e3000)
AtapiVirtToPhysAddr_: f74e3000 -> 00000000:517bc000
  ph data[0]=0:517b9000 (3fff)
  get Phys(data[n=1+4000]=f74e4000)
AtapiVirtToPhysAddr_: f74e4000 -> 00000000:517b5000
  ph data[1]=0:517b5000 (fff)
  get Phys(data[n=2+1000]=f74e5000)
AtapiVirtToPhysAddr_: f74e5000 -> 00000000:517b6000
  ph data[1]=0:517b5000 (1fff)
  get Phys(data[n=2+2000]=f74e6000)
AtapiVirtToPhysAddr_: f74e6000 -> 00000000:517b7000
  ph data[1]=0:517b5000 (2fff)
  get Phys(data[n=2+3000]=f74e7000)
AtapiVirtToPhysAddr_: f74e7000 -> 00000000:517b8000
  ph data[1]=0:517b5000 (3fff)
  get Phys(data[n=2+4000]=f74e8000)
AtapiVirtToPhysAddr_: f74e8000 -> 00000000:517c1000
  ph data[2]=0:517c1000 (fff)
  get Phys(data[n=3+1000]=f74e9000)
AtapiVirtToPhysAddr_: f74e9000 -> 00000000:517c2000
  ph data[2]=0:517c1000 (1fff)
  get Phys(data[n=3+2000]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:517c3000
  ph data[2]=0:517c1000 (2fff)
  get Phys(data[n=3+3000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:517c4000
  ph data[2]=0:517c1000 (3fff)
  get Phys(data[n=3+4000]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:517bd000
  ph data[3]=0:517bd000 (fff)
  get Phys(data[n=4+1000]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:517be000
  ph data[3]=0:517bd000 (1fff)
  get Phys(data[n=4+2000]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:517bf000
  ph data[3]=0:517bd000 (2fff)
  get Phys(data[n=4+3000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:517c0000
  set TERM
  ph data[3]=0:517bd000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39042b00, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520afc
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39042b80, OrigWordsRequested 0x7c00, DevSize 0x7c
IdeReadWrite (REQ): Starting sector is 39042b80, Number of WORDS 0x7c00, DevSize 0x7c
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f74f0000, count f800, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f74f0000)
AtapiVirtToPhysAddr_: f74f0000 -> 00000000:517c9000
  ph data[0]=0:517c9000 (fff)
  get Phys(data[n=1+1000]=f74f1000)
AtapiVirtToPhysAddr_: f74f1000 -> 00000000:517ca000
  ph data[0]=0:517c9000 (1fff)
  get Phys(data[n=1+2000]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:517cb000
  ph data[0]=0:517c9000 (2fff)
  get Phys(data[n=1+3000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:517cc000
  ph data[0]=0:517c9000 (3fff)
  get Phys(data[n=1+4000]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:517c5000
  ph data[1]=0:517c5000 (fff)
  get Phys(data[n=2+1000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:517c6000
  ph data[1]=0:517c5000 (1fff)
  get Phys(data[n=2+2000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:517c7000
  ph data[1]=0:517c5000 (2fff)
  get Phys(data[n=2+3000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:517c8000
  ph data[1]=0:517c5000 (3fff)
  get Phys(data[n=2+4000]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:517d1000
  ph data[2]=0:517d1000 (fff)
  get Phys(data[n=3+1000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:517d2000
  ph data[2]=0:517d1000 (1fff)
  get Phys(data[n=3+2000]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:517d3000
  ph data[2]=0:517d1000 (2fff)
  get Phys(data[n=3+3000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:517d4000
  ph data[2]=0:517d1000 (3fff)
  get Phys(data[n=3+4000]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:517cd000
  ph data[3]=0:517cd000 (fff)
  get Phys(data[n=4+1000]=f74fd000)
AtapiVirtToPhysAddr_: f74fd000 -> 00000000:517ce000
  ph data[3]=0:517cd000 (1fff)
  get Phys(data[n=4+2000]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:517cf000
  ph data[3]=0:517cd000 (2fff)
  get Phys(data[n=4+3000]=f74ff000)
AtapiVirtToPhysAddr_: f74ff000 -> 00000000:517d0000
  set TERM
  ph data[3]=0:517cd000 (37ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a10
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39042b80, Count 0x7c(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 7c00, WordsLeft 7c00
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered f800, full size f800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39042c00, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39042c00, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:51673000
  ph data[0]=0:51673000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:51674000
  ph data[0]=0:51673000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:51675000
  ph data[0]=0:51673000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:51676000
  ph data[0]=0:51673000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:51677000
  ph data[0]=0:51673000 (4fff)
  get Phys(data[n=1+5000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:51678000
  ph data[0]=0:51673000 (5fff)
  get Phys(data[n=1+6000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:51671000
  ph data[1]=0:51671000 (fff)
  get Phys(data[n=2+1000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:51672000
  ph data[1]=0:51671000 (1fff)
  get Phys(data[n=2+2000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:5167b000
  ph data[2]=0:5167b000 (fff)
  get Phys(data[n=3+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:5167c000
  ph data[2]=0:5167b000 (1fff)
  get Phys(data[n=3+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:5167d000
  ph data[2]=0:5167b000 (2fff)
  get Phys(data[n=3+3000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:5167e000
  ph data[2]=0:5167b000 (3fff)
  get Phys(data[n=3+4000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:5167f000
  ph data[2]=0:5167b000 (4fff)
  get Phys(data[n=3+5000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:51680000
  ph data[2]=0:5167b000 (5fff)
  get Phys(data[n=3+6000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:51679000
  ph data[3]=0:51679000 (fff)
  get Phys(data[n=4+1000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:5167a000
  set TERM
  ph data[3]=0:51679000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39042c00, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39042c80, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39042c80, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:51683000
  ph data[0]=0:51683000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:51684000
  ph data[0]=0:51683000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:51685000
  ph data[0]=0:51683000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:51686000
  ph data[0]=0:51683000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:51687000
  ph data[0]=0:51683000 (4fff)
  get Phys(data[n=1+5000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:51688000
  ph data[0]=0:51683000 (5fff)
  get Phys(data[n=1+6000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:51681000
  ph data[1]=0:51681000 (fff)
  get Phys(data[n=2+1000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:51682000
  ph data[1]=0:51681000 (1fff)
  get Phys(data[n=2+2000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:5168b000
  ph data[2]=0:5168b000 (fff)
  get Phys(data[n=3+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:5168c000
  ph data[2]=0:5168b000 (1fff)
  get Phys(data[n=3+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:5168d000
  ph data[2]=0:5168b000 (2fff)
  get Phys(data[n=3+3000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:5168e000
  ph data[2]=0:5168b000 (3fff)
  get Phys(data[n=3+4000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:5168f000
  ph data[2]=0:5168b000 (4fff)
  get Phys(data[n=3+5000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:51690000
  ph data[2]=0:5168b000 (5fff)
  get Phys(data[n=3+6000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:51689000
  ph data[3]=0:51689000 (fff)
  get Phys(data[n=4+1000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:5168a000
  set TERM
  ph data[3]=0:51689000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39042d00, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39042d00, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:51693000
  ph data[0]=0:51693000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:51694000
  ph data[0]=0:51693000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:51695000
  ph data[0]=0:51693000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:51696000
  ph data[0]=0:51693000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:51697000
  ph data[0]=0:51693000 (4fff)
  get Phys(data[n=1+5000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:51698000
  ph data[0]=0:51693000 (5fff)
  get Phys(data[n=1+6000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:51691000
  ph data[1]=0:51691000 (fff)
  get Phys(data[n=2+1000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:51692000
  ph data[1]=0:51691000 (1fff)
  get Phys(data[n=2+2000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:5169b000
  ph data[2]=0:5169b000 (fff)
  get Phys(data[n=3+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:5169c000
  ph data[2]=0:5169b000 (1fff)
  get Phys(data[n=3+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:5169d000
  ph data[2]=0:5169b000 (2fff)
  get Phys(data[n=3+3000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:5169e000
  ph data[2]=0:5169b000 (3fff)
  get Phys(data[n=3+4000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:5169f000
  ph data[2]=0:5169b000 (4fff)
  get Phys(data[n=3+5000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:516a0000
  ph data[2]=0:5169b000 (5fff)
  get Phys(data[n=3+6000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:51699000
  ph data[3]=0:51699000 (fff)
  get Phys(data[n=4+1000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:5169a000
  set TERM
  ph data[3]=0:51699000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39042c80, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39042d80, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39042d80, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:516a3000
  ph data[0]=0:516a3000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:516a5000
  ph data[1]=0:516a5000 (fff)
  get Phys(data[n=2+1000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:516a6000
  ph data[1]=0:516a5000 (1fff)
  get Phys(data[n=2+2000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:516a7000
  ph data[1]=0:516a5000 (2fff)
  get Phys(data[n=2+3000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:516a8000
  ph data[1]=0:516a5000 (3fff)
  get Phys(data[n=2+4000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:516a1000
  ph data[2]=0:516a1000 (fff)
  get Phys(data[n=3+1000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:516a2000
  ph data[2]=0:516a1000 (1fff)
  get Phys(data[n=3+2000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:516ab000
  ph data[3]=0:516ab000 (fff)
  get Phys(data[n=4+1000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:516ac000
  ph data[3]=0:516ab000 (1fff)
  get Phys(data[n=4+2000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:516ad000
  ph data[3]=0:516ab000 (2fff)
  get Phys(data[n=4+3000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:516ae000
  ph data[3]=0:516ab000 (3fff)
  get Phys(data[n=4+4000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:516af000
  ph data[3]=0:516ab000 (4fff)
  get Phys(data[n=4+5000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:516b0000
  ph data[3]=0:516ab000 (5fff)
  get Phys(data[n=4+6000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:516a9000
  ph data[4]=0:516a9000 (fff)
  get Phys(data[n=5+1000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:516aa000
  ph data[4]=0:516a9000 (1fff)
  get Phys(data[n=5+2000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:516b3000
  set TERM
  ph data[5]=0:516b3000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39042d00, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39042d80, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x6, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520afc
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39043600, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39043600, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7057000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:51284000
  ph data[0]=0:51284000 (fff)
  get Phys(data[n=1+1000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:51285000
  ph data[0]=0:51284000 (1fff)
  get Phys(data[n=1+2000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:51286000
  ph data[0]=0:51284000 (2fff)
  get Phys(data[n=1+3000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:51287000
  ph data[0]=0:51284000 (3fff)
  get Phys(data[n=1+4000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:51288000
  ph data[0]=0:51284000 (4fff)
  get Phys(data[n=1+5000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:51289000
  ph data[0]=0:51284000 (5fff)
  get Phys(data[n=1+6000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:51282000
  ph data[1]=0:51282000 (fff)
  get Phys(data[n=2+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:51283000
  ph data[1]=0:51282000 (1fff)
  get Phys(data[n=2+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:5128c000
  ph data[2]=0:5128c000 (fff)
  get Phys(data[n=3+1000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:5128d000
  ph data[2]=0:5128c000 (1fff)
  get Phys(data[n=3+2000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:5128e000
  ph data[2]=0:5128c000 (2fff)
  get Phys(data[n=3+3000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:5128f000
  ph data[2]=0:5128c000 (3fff)
  get Phys(data[n=3+4000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:51290000
  ph data[2]=0:5128c000 (4fff)
  get Phys(data[n=3+5000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:51291000
  ph data[2]=0:5128c000 (5fff)
  get Phys(data[n=3+6000]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:5128a000
  ph data[3]=0:5128a000 (fff)
  get Phys(data[n=4+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:5128b000
  set TERM
  ph data[3]=0:5128a000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39043600, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520afc
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39043680, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39043680, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7067000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:51294000
  ph data[0]=0:51294000 (fff)
  get Phys(data[n=1+1000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:51295000
  ph data[0]=0:51294000 (1fff)
  get Phys(data[n=1+2000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:51296000
  ph data[0]=0:51294000 (2fff)
  get Phys(data[n=1+3000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:51297000
  ph data[0]=0:51294000 (3fff)
  get Phys(data[n=1+4000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:51298000
  ph data[0]=0:51294000 (4fff)
  get Phys(data[n=1+5000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:51299000
  ph data[0]=0:51294000 (5fff)
  get Phys(data[n=1+6000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:51292000
  ph data[1]=0:51292000 (fff)
  get Phys(data[n=2+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:51293000
  ph data[1]=0:51292000 (1fff)
  get Phys(data[n=2+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:5129c000
  ph data[2]=0:5129c000 (fff)
  get Phys(data[n=3+1000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:5129d000
  ph data[2]=0:5129c000 (1fff)
  get Phys(data[n=3+2000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:5129e000
  ph data[2]=0:5129c000 (2fff)
  get Phys(data[n=3+3000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:5129f000
  ph data[2]=0:5129c000 (3fff)
  get Phys(data[n=3+4000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:512a0000
  ph data[2]=0:5129c000 (4fff)
  get Phys(data[n=3+5000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:512a1000
  ph data[2]=0:5129c000 (5fff)
  get Phys(data[n=3+6000]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:5129a000
  ph data[3]=0:5129a000 (fff)
  get Phys(data[n=4+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:5129b000
  set TERM
  ph data[3]=0:5129a000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520afc
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39043700, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39043700, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7077000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:512a4000
  ph data[0]=0:512a4000 (fff)
  get Phys(data[n=1+1000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:512a5000
  ph data[0]=0:512a4000 (1fff)
  get Phys(data[n=1+2000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:512a6000
  ph data[0]=0:512a4000 (2fff)
  get Phys(data[n=1+3000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:512a7000
  ph data[0]=0:512a4000 (3fff)
  get Phys(data[n=1+4000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:512a8000
  ph data[0]=0:512a4000 (4fff)
  get Phys(data[n=1+5000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:512a9000
  ph data[0]=0:512a4000 (5fff)
  get Phys(data[n=1+6000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:512a2000
  ph data[1]=0:512a2000 (fff)
  get Phys(data[n=2+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:512a3000
  ph data[1]=0:512a2000 (1fff)
  get Phys(data[n=2+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:512ac000
  ph data[2]=0:512ac000 (fff)
  get Phys(data[n=3+1000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:512ad000
  ph data[2]=0:512ac000 (1fff)
  get Phys(data[n=3+2000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:512ae000
  ph data[2]=0:512ac000 (2fff)
  get Phys(data[n=3+3000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:512af000
  ph data[2]=0:512ac000 (3fff)
  get Phys(data[n=3+4000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:512b0000
  ph data[2]=0:512ac000 (4fff)
  get Phys(data[n=3+5000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:512b1000
  ph data[2]=0:512ac000 (5fff)
  get Phys(data[n=3+6000]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:512aa000
  ph data[3]=0:512aa000 (fff)
  get Phys(data[n=4+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:512ab000
  set TERM
  ph data[3]=0:512aa000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520afc
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39043780, OrigWordsRequested 0x6e00, DevSize 0x6e
IdeReadWrite (REQ): Starting sector is 39043780, Number of WORDS 0x6e00, DevSize 0x6e
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7087000, count dc00, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:512b4000
  ph data[0]=0:512b4000 (fff)
  get Phys(data[n=1+1000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:512b5000
  ph data[0]=0:512b4000 (1fff)
  get Phys(data[n=1+2000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:512b6000
  ph data[0]=0:512b4000 (2fff)
  get Phys(data[n=1+3000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:512b7000
  ph data[0]=0:512b4000 (3fff)
  get Phys(data[n=1+4000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:512b8000
  ph data[0]=0:512b4000 (4fff)
  get Phys(data[n=1+5000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:512b9000
  ph data[0]=0:512b4000 (5fff)
  get Phys(data[n=1+6000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:512b2000
  ph data[1]=0:512b2000 (fff)
  get Phys(data[n=2+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:512b3000
  ph data[1]=0:512b2000 (1fff)
  get Phys(data[n=2+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:512bc000
  ph data[2]=0:512bc000 (fff)
  get Phys(data[n=3+1000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:512bd000
  ph data[2]=0:512bc000 (1fff)
  get Phys(data[n=3+2000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:512be000
  ph data[2]=0:512bc000 (2fff)
  get Phys(data[n=3+3000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:512bf000
  ph data[2]=0:512bc000 (3fff)
  get Phys(data[n=3+4000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:512c0000
  ph data[2]=0:512bc000 (4fff)
  get Phys(data[n=3+5000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:512c1000
  set TERM
  ph data[2]=0:512bc000 (5bff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a1c
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39043680, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39043700, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39043780, Count 0x6e(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x3, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 6e00, WordsLeft 6e00
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered dc00, full size dc00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390437f0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390437f0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:50b7d000
  ph data[0]=0:50b7d000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:50b7e000
  ph data[0]=0:50b7d000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:50b7f000
  ph data[0]=0:50b7d000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:50b80000
  ph data[0]=0:50b7d000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:50b81000
  ph data[0]=0:50b7d000 (4fff)
  get Phys(data[n=1+5000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:50b82000
  ph data[0]=0:50b7d000 (5fff)
  get Phys(data[n=1+6000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:50b7b000
  ph data[1]=0:50b7b000 (fff)
  get Phys(data[n=2+1000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:50b7c000
  ph data[1]=0:50b7b000 (1fff)
  get Phys(data[n=2+2000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:50b85000
  ph data[2]=0:50b85000 (fff)
  get Phys(data[n=3+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:50b86000
  ph data[2]=0:50b85000 (1fff)
  get Phys(data[n=3+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:50b87000
  ph data[2]=0:50b85000 (2fff)
  get Phys(data[n=3+3000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:50b88000
  ph data[2]=0:50b85000 (3fff)
  get Phys(data[n=3+4000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:50b89000
  ph data[2]=0:50b85000 (4fff)
  get Phys(data[n=3+5000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:50b8a000
  ph data[2]=0:50b85000 (5fff)
  get Phys(data[n=3+6000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:50b83000
  ph data[3]=0:50b83000 (fff)
  get Phys(data[n=4+1000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:50b84000
  set TERM
  ph data[3]=0:50b83000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390437f0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39043870, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39043870, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:50b8d000
  ph data[0]=0:50b8d000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:50b8e000
  ph data[0]=0:50b8d000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:50b8f000
  ph data[0]=0:50b8d000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:50b90000
  ph data[0]=0:50b8d000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:50b91000
  ph data[0]=0:50b8d000 (4fff)
  get Phys(data[n=1+5000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:50b92000
  ph data[0]=0:50b8d000 (5fff)
  get Phys(data[n=1+6000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:50b8b000
  ph data[1]=0:50b8b000 (fff)
  get Phys(data[n=2+1000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:50b8c000
  ph data[1]=0:50b8b000 (1fff)
  get Phys(data[n=2+2000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:50b95000
  ph data[2]=0:50b95000 (fff)
  get Phys(data[n=3+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:50b96000
  ph data[2]=0:50b95000 (1fff)
  get Phys(data[n=3+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:50b97000
  ph data[2]=0:50b95000 (2fff)
  get Phys(data[n=3+3000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:50b98000
  ph data[2]=0:50b95000 (3fff)
  get Phys(data[n=3+4000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:50b99000
  ph data[2]=0:50b95000 (4fff)
  get Phys(data[n=3+5000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:50b9a000
  ph data[2]=0:50b95000 (5fff)
  get Phys(data[n=3+6000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:50b93000
  ph data[3]=0:50b93000 (fff)
  get Phys(data[n=4+1000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:50b94000
  set TERM
  ph data[3]=0:50b93000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390438f0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390438f0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:50b9d000
  ph data[0]=0:50b9d000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:50b9e000
  ph data[0]=0:50b9d000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:50b9f000
  ph data[0]=0:50b9d000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:50ba0000
  ph data[0]=0:50b9d000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:50ba1000
  ph data[0]=0:50b9d000 (4fff)
  get Phys(data[n=1+5000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:50ba2000
  ph data[0]=0:50b9d000 (5fff)
  get Phys(data[n=1+6000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:50b9b000
  ph data[1]=0:50b9b000 (fff)
  get Phys(data[n=2+1000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:50b9c000
  ph data[1]=0:50b9b000 (1fff)
  get Phys(data[n=2+2000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:50ba5000
  ph data[2]=0:50ba5000 (fff)
  get Phys(data[n=3+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:50ba6000
  ph data[2]=0:50ba5000 (1fff)
  get Phys(data[n=3+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:50ba7000
  ph data[2]=0:50ba5000 (2fff)
  get Phys(data[n=3+3000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:50ba8000
  ph data[2]=0:50ba5000 (3fff)
  get Phys(data[n=3+4000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:50ba9000
  ph data[2]=0:50ba5000 (4fff)
  get Phys(data[n=3+5000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:50baa000
  ph data[2]=0:50ba5000 (5fff)
  get Phys(data[n=3+6000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:50ba3000
  ph data[3]=0:50ba3000 (fff)
  get Phys(data[n=4+1000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:50ba4000
  set TERM
  ph data[3]=0:50ba3000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520bf0
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39043870, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39043970, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39043970, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:50bad000
  ph data[0]=0:50bad000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:50bae000
  ph data[0]=0:50bad000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:50baf000
  ph data[0]=0:50bad000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:50bb0000
  ph data[0]=0:50bad000 (3fff)
  get Phys(data[n=1+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:50bb1000
  ph data[0]=0:50bad000 (4fff)
  get Phys(data[n=1+5000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:50bb2000
  ph data[0]=0:50bad000 (5fff)
  get Phys(data[n=1+6000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:50bab000
  ph data[1]=0:50bab000 (fff)
  get Phys(data[n=2+1000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:50bac000
  ph data[1]=0:50bab000 (1fff)
  get Phys(data[n=2+2000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:50bb5000
  ph data[2]=0:50bb5000 (fff)
  get Phys(data[n=3+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:50bb6000
  ph data[2]=0:50bb5000 (1fff)
  get Phys(data[n=3+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:50bb7000
  ph data[2]=0:50bb5000 (2fff)
  get Phys(data[n=3+3000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:50bb8000
  ph data[2]=0:50bb5000 (3fff)
  get Phys(data[n=3+4000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:50bb9000
  ph data[2]=0:50bb5000 (4fff)
  get Phys(data[n=3+5000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:50bba000
  ph data[2]=0:50bb5000 (5fff)
  get Phys(data[n=3+6000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:50bb3000
  ph data[3]=0:50bb3000 (fff)
  get Phys(data[n=4+1000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:50bb4000
  set TERM
  ph data[3]=0:50bb3000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390438f0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39043970, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520afc
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390439f0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390439f0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f74da000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f74da000)
AtapiVirtToPhysAddr_: f74da000 -> 00000000:5077d000
  ph data[0]=0:5077d000 (fff)
  get Phys(data[n=1+1000]=f74db000)
AtapiVirtToPhysAddr_: f74db000 -> 00000000:5077e000
  ph data[0]=0:5077d000 (1fff)
  get Phys(data[n=1+2000]=f74dc000)
AtapiVirtToPhysAddr_: f74dc000 -> 00000000:5077f000
  ph data[0]=0:5077d000 (2fff)
  get Phys(data[n=1+3000]=f74dd000)
AtapiVirtToPhysAddr_: f74dd000 -> 00000000:50780000
  ph data[0]=0:5077d000 (3fff)
  get Phys(data[n=1+4000]=f74de000)
AtapiVirtToPhysAddr_: f74de000 -> 00000000:50781000
  ph data[0]=0:5077d000 (4fff)
  get Phys(data[n=1+5000]=f74df000)
AtapiVirtToPhysAddr_: f74df000 -> 00000000:50782000
  ph data[0]=0:5077d000 (5fff)
  get Phys(data[n=1+6000]=f74e0000)
AtapiVirtToPhysAddr_: f74e0000 -> 00000000:50783000
  ph data[0]=0:5077d000 (6fff)
  get Phys(data[n=1+7000]=f74e1000)
AtapiVirtToPhysAddr_: f74e1000 -> 00000000:50784000
  ph data[0]=0:5077d000 (7fff)
  get Phys(data[n=1+8000]=f74e2000)
AtapiVirtToPhysAddr_: f74e2000 -> 00000000:50785000
  ph data[0]=0:5077d000 (8fff)
  get Phys(data[n=1+9000]=f74e3000)
AtapiVirtToPhysAddr_: f74e3000 -> 00000000:50786000
  ph data[0]=0:5077d000 (9fff)
  get Phys(data[n=1+a000]=f74e4000)
AtapiVirtToPhysAddr_: f74e4000 -> 00000000:50787000
  ph data[0]=0:5077d000 (afff)
  get Phys(data[n=1+b000]=f74e5000)
AtapiVirtToPhysAddr_: f74e5000 -> 00000000:50788000
  ph data[0]=0:5077d000 (bfff)
  get Phys(data[n=1+c000]=f74e6000)
AtapiVirtToPhysAddr_: f74e6000 -> 00000000:50789000
  ph data[0]=0:5077d000 (cfff)
  get Phys(data[n=1+d000]=f74e7000)
AtapiVirtToPhysAddr_: f74e7000 -> 00000000:5078a000
  ph data[0]=0:5077d000 (dfff)
  get Phys(data[n=1+e000]=f74e8000)
AtapiVirtToPhysAddr_: f74e8000 -> 00000000:5078b000
  ph data[0]=0:5077d000 (efff)
  get Phys(data[n=1+f000]=f74e9000)
AtapiVirtToPhysAddr_: f74e9000 -> 00000000:5078c000
  set TERM
  ph data[0]=0:5077d000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390439f0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520afc
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39043a70, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39043a70, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f74ea000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:5078d000
  ph data[0]=0:5078d000 (fff)
  get Phys(data[n=1+1000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:5078e000
  ph data[0]=0:5078d000 (1fff)
  get Phys(data[n=1+2000]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:5078f000
  ph data[0]=0:5078d000 (2fff)
  get Phys(data[n=1+3000]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:50790000
  ph data[0]=0:5078d000 (3fff)
  get Phys(data[n=1+4000]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:50791000
  ph data[0]=0:5078d000 (4fff)
  get Phys(data[n=1+5000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:50792000
  ph data[0]=0:5078d000 (5fff)
  get Phys(data[n=1+6000]=f74f0000)
AtapiVirtToPhysAddr_: f74f0000 -> 00000000:50793000
  ph data[0]=0:5078d000 (6fff)
  get Phys(data[n=1+7000]=f74f1000)
AtapiVirtToPhysAddr_: f74f1000 -> 00000000:50794000
  ph data[0]=0:5078d000 (7fff)
  get Phys(data[n=1+8000]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:50795000
  ph data[0]=0:5078d000 (8fff)
  get Phys(data[n=1+9000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:50796000
  ph data[0]=0:5078d000 (9fff)
  get Phys(data[n=1+a000]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:50797000
  ph data[0]=0:5078d000 (afff)
  get Phys(data[n=1+b000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:50798000
  ph data[0]=0:5078d000 (bfff)
  get Phys(data[n=1+c000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:50799000
  ph data[0]=0:5078d000 (cfff)
  get Phys(data[n=1+d000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:5079a000
  ph data[0]=0:5078d000 (dfff)
  get Phys(data[n=1+e000]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:5079b000
  ph data[0]=0:5078d000 (efff)
  get Phys(data[n=1+f000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:5079c000
  set TERM
  ph data[0]=0:5078d000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520afc
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39043af0, OrigWordsRequested 0x2d00, DevSize 0x2d
IdeReadWrite (REQ): Starting sector is 39043af0, Number of WORDS 0x2d00, DevSize 0x2d
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f74fa000, count 5a00, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:5079d000
  ph data[0]=0:5079d000 (fff)
  get Phys(data[n=1+1000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:5079e000
  ph data[0]=0:5079d000 (1fff)
  get Phys(data[n=1+2000]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:5079f000
  ph data[0]=0:5079d000 (2fff)
  get Phys(data[n=1+3000]=f74fd000)
AtapiVirtToPhysAddr_: f74fd000 -> 00000000:507a0000
  ph data[0]=0:5079d000 (3fff)
  get Phys(data[n=1+4000]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:507a1000
  ph data[0]=0:5079d000 (4fff)
  get Phys(data[n=1+5000]=f74ff000)
AtapiVirtToPhysAddr_: f74ff000 -> 00000000:507a2000
  set TERM
  ph data[0]=0:5079d000 (59ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39043a70, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39043af0, Count 0x2d(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 2d00, WordsLeft 2d00
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 5a00, full size 5a00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39043b20, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39043b20, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:5062f000
  ph data[0]=0:5062f000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:50630000
  ph data[0]=0:5062f000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:50631000
  ph data[0]=0:5062f000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:50632000
  ph data[0]=0:5062f000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:50633000
  ph data[0]=0:5062f000 (4fff)
  get Phys(data[n=1+5000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:50634000
  ph data[0]=0:5062f000 (5fff)
  get Phys(data[n=1+6000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:50635000
  ph data[0]=0:5062f000 (6fff)
  get Phys(data[n=1+7000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:50636000
  ph data[0]=0:5062f000 (7fff)
  get Phys(data[n=1+8000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:50637000
  ph data[0]=0:5062f000 (8fff)
  get Phys(data[n=1+9000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:50638000
  ph data[0]=0:5062f000 (9fff)
  get Phys(data[n=1+a000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:50639000
  ph data[0]=0:5062f000 (afff)
  get Phys(data[n=1+b000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:5063a000
  ph data[0]=0:5062f000 (bfff)
  get Phys(data[n=1+c000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:5063b000
  ph data[0]=0:5062f000 (cfff)
  get Phys(data[n=1+d000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:5063c000
  ph data[0]=0:5062f000 (dfff)
  get Phys(data[n=1+e000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:5063d000
  ph data[0]=0:5062f000 (efff)
  get Phys(data[n=1+f000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:5063e000
  set TERM
  ph data[0]=0:5062f000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39043b20, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39043ba0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39043ba0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:5063f000
  ph data[0]=0:5063f000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:50640000
  ph data[0]=0:5063f000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:50641000
  ph data[0]=0:5063f000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:50642000
  ph data[0]=0:5063f000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:50643000
  ph data[0]=0:5063f000 (4fff)
  get Phys(data[n=1+5000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:50644000
  ph data[0]=0:5063f000 (5fff)
  get Phys(data[n=1+6000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:50645000
  ph data[0]=0:5063f000 (6fff)
  get Phys(data[n=1+7000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:50646000
  ph data[0]=0:5063f000 (7fff)
  get Phys(data[n=1+8000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:50647000
  ph data[0]=0:5063f000 (8fff)
  get Phys(data[n=1+9000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:50648000
  ph data[0]=0:5063f000 (9fff)
  get Phys(data[n=1+a000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:50649000
  ph data[0]=0:5063f000 (afff)
  get Phys(data[n=1+b000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:5064a000
  ph data[0]=0:5063f000 (bfff)
  get Phys(data[n=1+c000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:5064b000
  ph data[0]=0:5063f000 (cfff)
  get Phys(data[n=1+d000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:5064c000
  ph data[0]=0:5063f000 (dfff)
  get Phys(data[n=1+e000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:5064d000
  ph data[0]=0:5063f000 (efff)
  get Phys(data[n=1+f000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:5064e000
  set TERM
  ph data[0]=0:5063f000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39043ba0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39043c20, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39043c20, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:5064f000
  ph data[0]=0:5064f000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:50650000
  ph data[0]=0:5064f000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:50651000
  ph data[0]=0:5064f000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:50652000
  ph data[0]=0:5064f000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:50653000
  ph data[0]=0:5064f000 (4fff)
  get Phys(data[n=1+5000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:50654000
  ph data[0]=0:5064f000 (5fff)
  get Phys(data[n=1+6000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:50655000
  ph data[0]=0:5064f000 (6fff)
  get Phys(data[n=1+7000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:50656000
  ph data[0]=0:5064f000 (7fff)
  get Phys(data[n=1+8000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:50657000
  ph data[0]=0:5064f000 (8fff)
  get Phys(data[n=1+9000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:50658000
  ph data[0]=0:5064f000 (9fff)
  get Phys(data[n=1+a000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:50659000
  ph data[0]=0:5064f000 (afff)
  get Phys(data[n=1+b000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:5065a000
  ph data[0]=0:5064f000 (bfff)
  get Phys(data[n=1+c000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:5065b000
  ph data[0]=0:5064f000 (cfff)
  get Phys(data[n=1+d000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:5065c000
  ph data[0]=0:5064f000 (dfff)
  get Phys(data[n=1+e000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:5065d000
  ph data[0]=0:5064f000 (efff)
  get Phys(data[n=1+f000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:5065e000
  set TERM
  ph data[0]=0:5064f000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39043ca0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39043ca0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:5065f000
  ph data[0]=0:5065f000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:50660000
  ph data[0]=0:5065f000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:50661000
  ph data[0]=0:5065f000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:50662000
  ph data[0]=0:5065f000 (3fff)
  get Phys(data[n=1+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:50663000
  ph data[0]=0:5065f000 (4fff)
  get Phys(data[n=1+5000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:50664000
  ph data[0]=0:5065f000 (5fff)
  get Phys(data[n=1+6000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:50665000
  ph data[0]=0:5065f000 (6fff)
  get Phys(data[n=1+7000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:50666000
  ph data[0]=0:5065f000 (7fff)
  get Phys(data[n=1+8000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:50667000
  ph data[0]=0:5065f000 (8fff)
  get Phys(data[n=1+9000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:50668000
  ph data[0]=0:5065f000 (9fff)
  get Phys(data[n=1+a000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:50669000
  ph data[0]=0:5065f000 (afff)
  get Phys(data[n=1+b000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:5066a000
  ph data[0]=0:5065f000 (bfff)
  get Phys(data[n=1+c000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:5066b000
  ph data[0]=0:5065f000 (cfff)
  get Phys(data[n=1+d000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:5066c000
  ph data[0]=0:5065f000 (dfff)
  get Phys(data[n=1+e000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:5066d000
  ph data[0]=0:5065f000 (efff)
  get Phys(data[n=1+f000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:5066e000
  set TERM
  ph data[0]=0:5065f000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801904
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39043c20, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39043ca0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520afc
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39043d20, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39043d20, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f74ec000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:5023f000
  ph data[0]=0:5023f000 (fff)
  get Phys(data[n=1+1000]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:50240000
  ph data[0]=0:5023f000 (1fff)
  get Phys(data[n=1+2000]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:50241000
  ph data[0]=0:5023f000 (2fff)
  get Phys(data[n=1+3000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:50242000
  ph data[0]=0:5023f000 (3fff)
  get Phys(data[n=1+4000]=f74f0000)
AtapiVirtToPhysAddr_: f74f0000 -> 00000000:50243000
  ph data[0]=0:5023f000 (4fff)
  get Phys(data[n=1+5000]=f74f1000)
AtapiVirtToPhysAddr_: f74f1000 -> 00000000:50244000
  ph data[0]=0:5023f000 (5fff)
  get Phys(data[n=1+6000]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:5023d000
  ph data[1]=0:5023d000 (fff)
  get Phys(data[n=2+1000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:5023e000
  ph data[1]=0:5023d000 (1fff)
  get Phys(data[n=2+2000]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:50247000
  ph data[2]=0:50247000 (fff)
  get Phys(data[n=3+1000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:50248000
  ph data[2]=0:50247000 (1fff)
  get Phys(data[n=3+2000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:50249000
  ph data[2]=0:50247000 (2fff)
  get Phys(data[n=3+3000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:5024a000
  ph data[2]=0:50247000 (3fff)
  get Phys(data[n=3+4000]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:5024b000
  ph data[2]=0:50247000 (4fff)
  get Phys(data[n=3+5000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:5024c000
  ph data[2]=0:50247000 (5fff)
  get Phys(data[n=3+6000]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:50245000
  ph data[3]=0:50245000 (fff)
  get Phys(data[n=4+1000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:50246000
  set TERM
  ph data[3]=0:50245000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39043d20, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520afc
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39043da0, OrigWordsRequested 0x1d00, DevSize 0x1d
IdeReadWrite (REQ): Starting sector is 39043da0, Number of WORDS 0x1d00, DevSize 0x1d
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f74fc000, count 3a00, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:5024f000
  ph data[0]=0:5024f000 (fff)
  get Phys(data[n=1+1000]=f74fd000)
AtapiVirtToPhysAddr_: f74fd000 -> 00000000:50250000
  ph data[0]=0:5024f000 (1fff)
  get Phys(data[n=1+2000]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:50251000
  ph data[0]=0:5024f000 (2fff)
  get Phys(data[n=1+3000]=f74ff000)
AtapiVirtToPhysAddr_: f74ff000 -> 00000000:50252000
  set TERM
  ph data[0]=0:5024f000 (39ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39043da0, Count 0x1d(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1d00, WordsLeft 1d00
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 3a00, full size 3a00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39043dc0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39043dc0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:501e1000
  ph data[0]=0:501e1000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:501e2000
  ph data[0]=0:501e1000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:501db000
  ph data[1]=0:501db000 (fff)
  get Phys(data[n=2+1000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:501dc000
  ph data[1]=0:501db000 (1fff)
  get Phys(data[n=2+2000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:501dd000
  ph data[1]=0:501db000 (2fff)
  get Phys(data[n=2+3000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:501de000
  ph data[1]=0:501db000 (3fff)
  get Phys(data[n=2+4000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:501df000
  ph data[1]=0:501db000 (4fff)
  get Phys(data[n=2+5000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:501e0000
  ph data[1]=0:501db000 (5fff)
  get Phys(data[n=2+6000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:501e9000
  ph data[2]=0:501e9000 (fff)
  get Phys(data[n=3+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:501ea000
  ph data[2]=0:501e9000 (1fff)
  get Phys(data[n=3+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:501e3000
  ph data[3]=0:501e3000 (fff)
  get Phys(data[n=4+1000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:501e4000
  ph data[3]=0:501e3000 (1fff)
  get Phys(data[n=4+2000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:501e5000
  ph data[3]=0:501e3000 (2fff)
  get Phys(data[n=4+3000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:501e6000
  ph data[3]=0:501e3000 (3fff)
  get Phys(data[n=4+4000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:501e7000
  ph data[3]=0:501e3000 (4fff)
  get Phys(data[n=4+5000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:501e8000
  set TERM
  ph data[3]=0:501e3000 (5fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39043dc0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39043e40, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39043e40, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:501f1000
  ph data[0]=0:501f1000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:501f2000
  ph data[0]=0:501f1000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:501eb000
  ph data[1]=0:501eb000 (fff)
  get Phys(data[n=2+1000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:501ec000
  ph data[1]=0:501eb000 (1fff)
  get Phys(data[n=2+2000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:501ed000
  ph data[1]=0:501eb000 (2fff)
  get Phys(data[n=2+3000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:501ee000
  ph data[1]=0:501eb000 (3fff)
  get Phys(data[n=2+4000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:501ef000
  ph data[1]=0:501eb000 (4fff)
  get Phys(data[n=2+5000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:501f0000
  ph data[1]=0:501eb000 (5fff)
  get Phys(data[n=2+6000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:501f9000
  ph data[2]=0:501f9000 (fff)
  get Phys(data[n=3+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:501fa000
  ph data[2]=0:501f9000 (1fff)
  get Phys(data[n=3+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:501f3000
  ph data[3]=0:501f3000 (fff)
  get Phys(data[n=4+1000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:501f4000
  ph data[3]=0:501f3000 (1fff)
  get Phys(data[n=4+2000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:501f5000
  ph data[3]=0:501f3000 (2fff)
  get Phys(data[n=4+3000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:501f6000
  ph data[3]=0:501f3000 (3fff)
  get Phys(data[n=4+4000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:501f7000
  ph data[3]=0:501f3000 (4fff)
  get Phys(data[n=4+5000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:501f8000
  set TERM
  ph data[3]=0:501f3000 (5fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39043ec0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39043ec0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:50201000
  ph data[0]=0:50201000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:50202000
  ph data[0]=0:50201000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:501fb000
  ph data[1]=0:501fb000 (fff)
  get Phys(data[n=2+1000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:501fc000
  ph data[1]=0:501fb000 (1fff)
  get Phys(data[n=2+2000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:501fd000
  ph data[1]=0:501fb000 (2fff)
  get Phys(data[n=2+3000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:501fe000
  ph data[1]=0:501fb000 (3fff)
  get Phys(data[n=2+4000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:501ff000
  ph data[1]=0:501fb000 (4fff)
  get Phys(data[n=2+5000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:50200000
  ph data[1]=0:501fb000 (5fff)
  get Phys(data[n=2+6000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:50209000
  ph data[2]=0:50209000 (fff)
  get Phys(data[n=3+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:5020a000
  ph data[2]=0:50209000 (1fff)
  get Phys(data[n=3+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:50203000
  ph data[3]=0:50203000 (fff)
  get Phys(data[n=4+1000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:50204000
  ph data[3]=0:50203000 (1fff)
  get Phys(data[n=4+2000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:50205000
  ph data[3]=0:50203000 (2fff)
  get Phys(data[n=4+3000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:50206000
  ph data[3]=0:50203000 (3fff)
  get Phys(data[n=4+4000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:50207000
  ph data[3]=0:50203000 (4fff)
  get Phys(data[n=4+5000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:50208000
  set TERM
  ph data[3]=0:50203000 (5fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520bf0
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39043e40, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39043f40, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39043f40, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:50211000
  ph data[0]=0:50211000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:50212000
  ph data[0]=0:50211000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:5020b000
  ph data[1]=0:5020b000 (fff)
  get Phys(data[n=2+1000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:5020c000
  ph data[1]=0:5020b000 (1fff)
  get Phys(data[n=2+2000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:5020d000
  ph data[1]=0:5020b000 (2fff)
  get Phys(data[n=2+3000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:5020e000
  ph data[1]=0:5020b000 (3fff)
  get Phys(data[n=2+4000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:5020f000
  ph data[1]=0:5020b000 (4fff)
  get Phys(data[n=2+5000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:50210000
  ph data[1]=0:5020b000 (5fff)
  get Phys(data[n=2+6000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:50219000
  ph data[2]=0:50219000 (fff)
  get Phys(data[n=3+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:5021a000
  ph data[2]=0:50219000 (1fff)
  get Phys(data[n=3+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:50213000
  ph data[3]=0:50213000 (fff)
  get Phys(data[n=4+1000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:50214000
  ph data[3]=0:50213000 (1fff)
  get Phys(data[n=4+2000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:50215000
  ph data[3]=0:50213000 (2fff)
  get Phys(data[n=4+3000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:50216000
  ph data[3]=0:50213000 (3fff)
  get Phys(data[n=4+4000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:50217000
  ph data[3]=0:50213000 (4fff)
  get Phys(data[n=4+5000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:50218000
  set TERM
  ph data[3]=0:50213000 (5fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39043ec0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf78019e8
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39043f40, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520afc
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390441c0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390441c0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7059000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:4ffc2000
  ph data[0]=0:4ffc2000 (fff)
  get Phys(data[n=1+1000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:4ffc3000
  ph data[0]=0:4ffc2000 (1fff)
  get Phys(data[n=1+2000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:4ffc4000
  ph data[0]=0:4ffc2000 (2fff)
  get Phys(data[n=1+3000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:4ffc5000
  ph data[0]=0:4ffc2000 (3fff)
  get Phys(data[n=1+4000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:4ffc6000
  ph data[0]=0:4ffc2000 (4fff)
  get Phys(data[n=1+5000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:4ffc7000
  ph data[0]=0:4ffc2000 (5fff)
  get Phys(data[n=1+6000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:4ffc8000
  ph data[0]=0:4ffc2000 (6fff)
  get Phys(data[n=1+7000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:4ffc9000
  ph data[0]=0:4ffc2000 (7fff)
  get Phys(data[n=1+8000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:4ffca000
  ph data[0]=0:4ffc2000 (8fff)
  get Phys(data[n=1+9000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:4ffcb000
  ph data[0]=0:4ffc2000 (9fff)
  get Phys(data[n=1+a000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:4ffcc000
  ph data[0]=0:4ffc2000 (afff)
  get Phys(data[n=1+b000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:4ffcd000
  ph data[0]=0:4ffc2000 (bfff)
  get Phys(data[n=1+c000]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:4ffce000
  ph data[0]=0:4ffc2000 (cfff)
  get Phys(data[n=1+d000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:4ffcf000
  ph data[0]=0:4ffc2000 (dfff)
  get Phys(data[n=1+e000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:4ffd0000
  ph data[0]=0:4ffc2000 (efff)
  get Phys(data[n=1+f000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:4ffd1000
  set TERM
  ph data[0]=0:4ffc2000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390441c0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520afc
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39044240, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39044240, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7069000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:4ffd2000
  ph data[0]=0:4ffd2000 (fff)
  get Phys(data[n=1+1000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:4ffd3000
  ph data[0]=0:4ffd2000 (1fff)
  get Phys(data[n=1+2000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:4ffd4000
  ph data[0]=0:4ffd2000 (2fff)
  get Phys(data[n=1+3000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:4ffd5000
  ph data[0]=0:4ffd2000 (3fff)
  get Phys(data[n=1+4000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:4ffd6000
  ph data[0]=0:4ffd2000 (4fff)
  get Phys(data[n=1+5000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:4ffd7000
  ph data[0]=0:4ffd2000 (5fff)
  get Phys(data[n=1+6000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:4ffd8000
  ph data[0]=0:4ffd2000 (6fff)
  get Phys(data[n=1+7000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:4ffd9000
  ph data[0]=0:4ffd2000 (7fff)
  get Phys(data[n=1+8000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:4ffda000
  ph data[0]=0:4ffd2000 (8fff)
  get Phys(data[n=1+9000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:4ffdb000
  ph data[0]=0:4ffd2000 (9fff)
  get Phys(data[n=1+a000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:4ffdc000
  ph data[0]=0:4ffd2000 (afff)
  get Phys(data[n=1+b000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:4ffdd000
  ph data[0]=0:4ffd2000 (bfff)
  get Phys(data[n=1+c000]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:4ffde000
  ph data[0]=0:4ffd2000 (cfff)
  get Phys(data[n=1+d000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:4ffdf000
  ph data[0]=0:4ffd2000 (dfff)
  get Phys(data[n=1+e000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:4ffe0000
  ph data[0]=0:4ffd2000 (efff)
  get Phys(data[n=1+f000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:4ffe1000
  set TERM
  ph data[0]=0:4ffd2000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520afc
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390442c0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390442c0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7079000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:4ffe2000
  ph data[0]=0:4ffe2000 (fff)
  get Phys(data[n=1+1000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:4ffe3000
  ph data[0]=0:4ffe2000 (1fff)
  get Phys(data[n=1+2000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:4ffe4000
  ph data[0]=0:4ffe2000 (2fff)
  get Phys(data[n=1+3000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:4ffe5000
  ph data[0]=0:4ffe2000 (3fff)
  get Phys(data[n=1+4000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:4ffe6000
  ph data[0]=0:4ffe2000 (4fff)
  get Phys(data[n=1+5000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:4ffe7000
  ph data[0]=0:4ffe2000 (5fff)
  get Phys(data[n=1+6000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:4ffe8000
  ph data[0]=0:4ffe2000 (6fff)
  get Phys(data[n=1+7000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:4ffe9000
  ph data[0]=0:4ffe2000 (7fff)
  get Phys(data[n=1+8000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:4ffea000
  ph data[0]=0:4ffe2000 (8fff)
  get Phys(data[n=1+9000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:4ffeb000
  ph data[0]=0:4ffe2000 (9fff)
  get Phys(data[n=1+a000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:4ffec000
  ph data[0]=0:4ffe2000 (afff)
  get Phys(data[n=1+b000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:4ffed000
  ph data[0]=0:4ffe2000 (bfff)
  get Phys(data[n=1+c000]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:4ffee000
  ph data[0]=0:4ffe2000 (cfff)
  get Phys(data[n=1+d000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:4ffef000
  ph data[0]=0:4ffe2000 (dfff)
  get Phys(data[n=1+e000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:4fff0000
  ph data[0]=0:4ffe2000 (efff)
  get Phys(data[n=1+f000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:4fff1000
  set TERM
  ph data[0]=0:4ffe2000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520afc
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39044340, OrigWordsRequested 0x5400, DevSize 0x54
IdeReadWrite (REQ): Starting sector is 39044340, Number of WORDS 0x5400, DevSize 0x54
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7089000, count a800, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:4fff2000
  ph data[0]=0:4fff2000 (fff)
  get Phys(data[n=1+1000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:4fff3000
  ph data[0]=0:4fff2000 (1fff)
  get Phys(data[n=1+2000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:4fff4000
  ph data[0]=0:4fff2000 (2fff)
  get Phys(data[n=1+3000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:4fff5000
  ph data[0]=0:4fff2000 (3fff)
  get Phys(data[n=1+4000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:4fff6000
  ph data[0]=0:4fff2000 (4fff)
  get Phys(data[n=1+5000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:4fff7000
  ph data[0]=0:4fff2000 (5fff)
  get Phys(data[n=1+6000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:4fff8000
  ph data[0]=0:4fff2000 (6fff)
  get Phys(data[n=1+7000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:4fff9000
  ph data[0]=0:4fff2000 (7fff)
  get Phys(data[n=1+8000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:4fffa000
  ph data[0]=0:4fff2000 (8fff)
  get Phys(data[n=1+9000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:4fffb000
  ph data[0]=0:4fff2000 (9fff)
  get Phys(data[n=1+a000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:4fffc000
  set TERM
  ph data[0]=0:4fff2000 (a7ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39044240, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390442c0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39044340, Count 0x54(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x1, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 5400, WordsLeft 5400
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered a800, full size a800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390443a0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390443a0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:4f61b000
  ph data[0]=0:4f61b000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:4f61c000
  ph data[0]=0:4f61b000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:4f61d000
  ph data[0]=0:4f61b000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:4f61e000
  ph data[0]=0:4f61b000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:4f61f000
  ph data[0]=0:4f61b000 (4fff)
  get Phys(data[n=1+5000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:4f620000
  ph data[0]=0:4f61b000 (5fff)
  get Phys(data[n=1+6000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:4f619000
  ph data[1]=0:4f619000 (fff)
  get Phys(data[n=2+1000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:4f61a000
  ph data[1]=0:4f619000 (1fff)
  get Phys(data[n=2+2000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:4f623000
  ph data[2]=0:4f623000 (fff)
  get Phys(data[n=3+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:4f624000
  ph data[2]=0:4f623000 (1fff)
  get Phys(data[n=3+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:4f625000
  ph data[2]=0:4f623000 (2fff)
  get Phys(data[n=3+3000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:4f626000
  ph data[2]=0:4f623000 (3fff)
  get Phys(data[n=3+4000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:4f627000
  ph data[2]=0:4f623000 (4fff)
  get Phys(data[n=3+5000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:4f628000
  ph data[2]=0:4f623000 (5fff)
  get Phys(data[n=3+6000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:4f621000
  ph data[3]=0:4f621000 (fff)
  get Phys(data[n=4+1000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:4f622000
  set TERM
  ph data[3]=0:4f621000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390443a0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39044420, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39044420, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:4f62b000
  ph data[0]=0:4f62b000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:4f62c000
  ph data[0]=0:4f62b000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:4f62d000
  ph data[0]=0:4f62b000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:4f62e000
  ph data[0]=0:4f62b000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:4f62f000
  ph data[0]=0:4f62b000 (4fff)
  get Phys(data[n=1+5000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:4f630000
  ph data[0]=0:4f62b000 (5fff)
  get Phys(data[n=1+6000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:4f629000
  ph data[1]=0:4f629000 (fff)
  get Phys(data[n=2+1000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:4f62a000
  ph data[1]=0:4f629000 (1fff)
  get Phys(data[n=2+2000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:4f633000
  ph data[2]=0:4f633000 (fff)
  get Phys(data[n=3+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:4f634000
  ph data[2]=0:4f633000 (1fff)
  get Phys(data[n=3+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:4f635000
  ph data[2]=0:4f633000 (2fff)
  get Phys(data[n=3+3000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:4f636000
  ph data[2]=0:4f633000 (3fff)
  get Phys(data[n=3+4000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:4f637000
  ph data[2]=0:4f633000 (4fff)
  get Phys(data[n=3+5000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:4f638000
  ph data[2]=0:4f633000 (5fff)
  get Phys(data[n=3+6000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:4f631000
  ph data[3]=0:4f631000 (fff)
  get Phys(data[n=4+1000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:4f632000
  set TERM
  ph data[3]=0:4f631000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390444a0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390444a0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:4f63b000
  ph data[0]=0:4f63b000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:4f63c000
  ph data[0]=0:4f63b000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:4f63d000
  ph data[0]=0:4f63b000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:4f63e000
  ph data[0]=0:4f63b000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:4f63f000
  ph data[0]=0:4f63b000 (4fff)
  get Phys(data[n=1+5000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:4f640000
  ph data[0]=0:4f63b000 (5fff)
  get Phys(data[n=1+6000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:4f639000
  ph data[1]=0:4f639000 (fff)
  get Phys(data[n=2+1000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:4f63a000
  ph data[1]=0:4f639000 (1fff)
  get Phys(data[n=2+2000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:4f643000
  ph data[2]=0:4f643000 (fff)
  get Phys(data[n=3+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:4f644000
  ph data[2]=0:4f643000 (1fff)
  get Phys(data[n=3+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:4f645000
  ph data[2]=0:4f643000 (2fff)
  get Phys(data[n=3+3000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:4f646000
  ph data[2]=0:4f643000 (3fff)
  get Phys(data[n=3+4000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:4f647000
  ph data[2]=0:4f643000 (4fff)
  get Phys(data[n=3+5000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:4f648000
  ph data[2]=0:4f643000 (5fff)
  get Phys(data[n=3+6000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:4f641000
  ph data[3]=0:4f641000 (fff)
  get Phys(data[n=4+1000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:4f642000
  set TERM
  ph data[3]=0:4f641000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520bf0
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39044420, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39044520, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39044520, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:4f64b000
  ph data[0]=0:4f64b000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:4f64c000
  ph data[0]=0:4f64b000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:4f64d000
  ph data[0]=0:4f64b000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:4f64e000
  ph data[0]=0:4f64b000 (3fff)
  get Phys(data[n=1+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:4f64f000
  ph data[0]=0:4f64b000 (4fff)
  get Phys(data[n=1+5000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:4f650000
  ph data[0]=0:4f64b000 (5fff)
  get Phys(data[n=1+6000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:4f649000
  ph data[1]=0:4f649000 (fff)
  get Phys(data[n=2+1000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:4f64a000
  ph data[1]=0:4f649000 (1fff)
  get Phys(data[n=2+2000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:4f653000
  ph data[2]=0:4f653000 (fff)
  get Phys(data[n=3+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:4f654000
  ph data[2]=0:4f653000 (1fff)
  get Phys(data[n=3+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:4f655000
  ph data[2]=0:4f653000 (2fff)
  get Phys(data[n=3+3000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:4f656000
  ph data[2]=0:4f653000 (3fff)
  get Phys(data[n=3+4000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:4f657000
  ph data[2]=0:4f653000 (4fff)
  get Phys(data[n=3+5000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:4f658000
  ph data[2]=0:4f653000 (5fff)
  get Phys(data[n=3+6000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:4f651000
  ph data[3]=0:4f651000 (fff)
  get Phys(data[n=4+1000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:4f652000
  set TERM
  ph data[3]=0:4f651000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390444a0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39044520, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520afc
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390459a0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390459a0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:4f27d000
  ph data[0]=0:4f27d000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:4f27e000
  ph data[0]=0:4f27d000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:4f27f000
  ph data[0]=0:4f27d000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:4f278000
  ph data[1]=0:4f278000 (fff)
  get Phys(data[n=2+1000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:4f279000
  ph data[1]=0:4f278000 (1fff)
  get Phys(data[n=2+2000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:4f27a000
  ph data[1]=0:4f278000 (2fff)
  get Phys(data[n=2+3000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:4f27b000
  ph data[1]=0:4f278000 (3fff)
  get Phys(data[n=2+4000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:4f284000
  ph data[2]=0:4f284000 (fff)
  get Phys(data[n=3+1000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:4f285000
  ph data[2]=0:4f284000 (1fff)
  get Phys(data[n=3+2000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:4f286000
  ph data[2]=0:4f284000 (2fff)
  get Phys(data[n=3+3000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:4f287000
  ph data[2]=0:4f284000 (3fff)
  get Phys(data[n=3+4000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:4f280000
  ph data[3]=0:4f280000 (fff)
  get Phys(data[n=4+1000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:4f281000
  ph data[3]=0:4f280000 (1fff)
  get Phys(data[n=4+2000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:4f282000
  ph data[3]=0:4f280000 (2fff)
  get Phys(data[n=4+3000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:4f283000
  ph data[3]=0:4f280000 (3fff)
  get Phys(data[n=4+4000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:4f28c000
  set TERM
  ph data[4]=0:4f28c000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390459a0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x5, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520afc
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39045a20, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39045a20, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:4f28d000
  ph data[0]=0:4f28d000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:4f28e000
  ph data[0]=0:4f28d000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:4f28f000
  ph data[0]=0:4f28d000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:4f288000
  ph data[1]=0:4f288000 (fff)
  get Phys(data[n=2+1000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:4f289000
  ph data[1]=0:4f288000 (1fff)
  get Phys(data[n=2+2000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:4f28a000
  ph data[1]=0:4f288000 (2fff)
  get Phys(data[n=2+3000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:4f28b000
  ph data[1]=0:4f288000 (3fff)
  get Phys(data[n=2+4000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:4f294000
  ph data[2]=0:4f294000 (fff)
  get Phys(data[n=3+1000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:4f295000
  ph data[2]=0:4f294000 (1fff)
  get Phys(data[n=3+2000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:4f296000
  ph data[2]=0:4f294000 (2fff)
  get Phys(data[n=3+3000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:4f297000
  ph data[2]=0:4f294000 (3fff)
  get Phys(data[n=3+4000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:4f290000
  ph data[3]=0:4f290000 (fff)
  get Phys(data[n=4+1000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:4f291000
  ph data[3]=0:4f290000 (1fff)
  get Phys(data[n=4+2000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:4f292000
  ph data[3]=0:4f290000 (2fff)
  get Phys(data[n=4+3000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:4f293000
  ph data[3]=0:4f290000 (3fff)
  get Phys(data[n=4+4000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:4f29c000
  set TERM
  ph data[4]=0:4f29c000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520afc
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39045aa0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39045aa0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:4f29d000
  ph data[0]=0:4f29d000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:4f29e000
  ph data[0]=0:4f29d000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:4f29f000
  ph data[0]=0:4f29d000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:4f298000
  ph data[1]=0:4f298000 (fff)
  get Phys(data[n=2+1000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:4f299000
  ph data[1]=0:4f298000 (1fff)
  get Phys(data[n=2+2000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:4f29a000
  ph data[1]=0:4f298000 (2fff)
  get Phys(data[n=2+3000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:4f29b000
  ph data[1]=0:4f298000 (3fff)
  get Phys(data[n=2+4000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:4f2a4000
  ph data[2]=0:4f2a4000 (fff)
  get Phys(data[n=3+1000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:4f2a5000
  ph data[2]=0:4f2a4000 (1fff)
  get Phys(data[n=3+2000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:4f2a6000
  ph data[2]=0:4f2a4000 (2fff)
  get Phys(data[n=3+3000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:4f2a7000
  ph data[2]=0:4f2a4000 (3fff)
  get Phys(data[n=3+4000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:4f2a0000
  ph data[3]=0:4f2a0000 (fff)
  get Phys(data[n=4+1000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:4f2a1000
  ph data[3]=0:4f2a0000 (1fff)
  get Phys(data[n=4+2000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:4f2a2000
  ph data[3]=0:4f2a0000 (2fff)
  get Phys(data[n=4+3000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:4f2a3000
  ph data[3]=0:4f2a0000 (3fff)
  get Phys(data[n=4+4000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:4f2ac000
  set TERM
  ph data[4]=0:4f2ac000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520afc
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39045b20, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39045b20, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:4f2ad000
  ph data[0]=0:4f2ad000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:4f2ae000
  ph data[0]=0:4f2ad000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:4f2af000
  ph data[0]=0:4f2ad000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:4f2a8000
  ph data[1]=0:4f2a8000 (fff)
  get Phys(data[n=2+1000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:4f2a9000
  ph data[1]=0:4f2a8000 (1fff)
  get Phys(data[n=2+2000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:4f2aa000
  ph data[1]=0:4f2a8000 (2fff)
  get Phys(data[n=2+3000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:4f2ab000
  ph data[1]=0:4f2a8000 (3fff)
  get Phys(data[n=2+4000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:4f2b4000
  ph data[2]=0:4f2b4000 (fff)
  get Phys(data[n=3+1000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:4f2b5000
  ph data[2]=0:4f2b4000 (1fff)
  get Phys(data[n=3+2000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:4f2b6000
  ph data[2]=0:4f2b4000 (2fff)
  get Phys(data[n=3+3000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:4f2b7000
  ph data[2]=0:4f2b4000 (3fff)
  get Phys(data[n=3+4000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:4f2b0000
  ph data[3]=0:4f2b0000 (fff)
  get Phys(data[n=4+1000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:4f2b1000
  ph data[3]=0:4f2b0000 (1fff)
  get Phys(data[n=4+2000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:4f2b2000
  ph data[3]=0:4f2b0000 (2fff)
  get Phys(data[n=4+3000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:4f2b3000
  ph data[3]=0:4f2b0000 (3fff)
  get Phys(data[n=4+4000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:4f2bc000
  set TERM
  ph data[4]=0:4f2bc000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39045a20, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x5, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39045aa0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x5, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39045b20, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x5, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b38
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39045ba0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39045ba0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f74d8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f74d8000)
AtapiVirtToPhysAddr_: f74d8000 -> 00000000:4e2bd000
  ph data[0]=0:4e2bd000 (fff)
  get Phys(data[n=1+1000]=f74d9000)
AtapiVirtToPhysAddr_: f74d9000 -> 00000000:4e2be000
  ph data[0]=0:4e2bd000 (1fff)
  get Phys(data[n=1+2000]=f74da000)
AtapiVirtToPhysAddr_: f74da000 -> 00000000:4e2bf000
  ph data[0]=0:4e2bd000 (2fff)
  get Phys(data[n=1+3000]=f74db000)
AtapiVirtToPhysAddr_: f74db000 -> 00000000:4e2c0000
  ph data[0]=0:4e2bd000 (3fff)
  get Phys(data[n=1+4000]=f74dc000)
AtapiVirtToPhysAddr_: f74dc000 -> 00000000:4e2c1000
  ph data[0]=0:4e2bd000 (4fff)
  get Phys(data[n=1+5000]=f74dd000)
AtapiVirtToPhysAddr_: f74dd000 -> 00000000:4e2c2000
  ph data[0]=0:4e2bd000 (5fff)
  get Phys(data[n=1+6000]=f74de000)
AtapiVirtToPhysAddr_: f74de000 -> 00000000:4e2c3000
  ph data[0]=0:4e2bd000 (6fff)
  get Phys(data[n=1+7000]=f74df000)
AtapiVirtToPhysAddr_: f74df000 -> 00000000:4e2c4000
  ph data[0]=0:4e2bd000 (7fff)
  get Phys(data[n=1+8000]=f74e0000)
AtapiVirtToPhysAddr_: f74e0000 -> 00000000:4e2c5000
  ph data[0]=0:4e2bd000 (8fff)
  get Phys(data[n=1+9000]=f74e1000)
AtapiVirtToPhysAddr_: f74e1000 -> 00000000:4e2c6000
  ph data[0]=0:4e2bd000 (9fff)
  get Phys(data[n=1+a000]=f74e2000)
AtapiVirtToPhysAddr_: f74e2000 -> 00000000:4e2c7000
  ph data[0]=0:4e2bd000 (afff)
  get Phys(data[n=1+b000]=f74e3000)
AtapiVirtToPhysAddr_: f74e3000 -> 00000000:4e2c8000
  ph data[0]=0:4e2bd000 (bfff)
  get Phys(data[n=1+c000]=f74e4000)
AtapiVirtToPhysAddr_: f74e4000 -> 00000000:4e2c9000
  ph data[0]=0:4e2bd000 (cfff)
  get Phys(data[n=1+d000]=f74e5000)
AtapiVirtToPhysAddr_: f74e5000 -> 00000000:4e2ca000
  ph data[0]=0:4e2bd000 (dfff)
  get Phys(data[n=1+e000]=f74e6000)
AtapiVirtToPhysAddr_: f74e6000 -> 00000000:4e2cb000
  ph data[0]=0:4e2bd000 (efff)
  get Phys(data[n=1+f000]=f74e7000)
AtapiVirtToPhysAddr_: f74e7000 -> 00000000:4e2cc000
  set TERM
  ph data[0]=0:4e2bd000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39045ba0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b38
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39045c20, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39045c20, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f74e8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f74e8000)
AtapiVirtToPhysAddr_: f74e8000 -> 00000000:4e2cd000
  ph data[0]=0:4e2cd000 (fff)
  get Phys(data[n=1+1000]=f74e9000)
AtapiVirtToPhysAddr_: f74e9000 -> 00000000:4e2ce000
  ph data[0]=0:4e2cd000 (1fff)
  get Phys(data[n=1+2000]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:4e2cf000
  ph data[0]=0:4e2cd000 (2fff)
  get Phys(data[n=1+3000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:4e2d0000
  ph data[0]=0:4e2cd000 (3fff)
  get Phys(data[n=1+4000]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:4e2d1000
  ph data[0]=0:4e2cd000 (4fff)
  get Phys(data[n=1+5000]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:4e2d2000
  ph data[0]=0:4e2cd000 (5fff)
  get Phys(data[n=1+6000]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:4e2d3000
  ph data[0]=0:4e2cd000 (6fff)
  get Phys(data[n=1+7000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:4e2d4000
  ph data[0]=0:4e2cd000 (7fff)
  get Phys(data[n=1+8000]=f74f0000)
AtapiVirtToPhysAddr_: f74f0000 -> 00000000:4e2d5000
  ph data[0]=0:4e2cd000 (8fff)
  get Phys(data[n=1+9000]=f74f1000)
AtapiVirtToPhysAddr_: f74f1000 -> 00000000:4e2d6000
  ph data[0]=0:4e2cd000 (9fff)
  get Phys(data[n=1+a000]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:4e2d7000
  ph data[0]=0:4e2cd000 (afff)
  get Phys(data[n=1+b000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:4e2d8000
  ph data[0]=0:4e2cd000 (bfff)
  get Phys(data[n=1+c000]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:4e2d9000
  ph data[0]=0:4e2cd000 (cfff)
  get Phys(data[n=1+d000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:4e2da000
  ph data[0]=0:4e2cd000 (dfff)
  get Phys(data[n=1+e000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:4e2db000
  ph data[0]=0:4e2cd000 (efff)
  get Phys(data[n=1+f000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:4e2dc000
  set TERM
  ph data[0]=0:4e2cd000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b38
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39045ca0, OrigWordsRequested 0x3500, DevSize 0x35
IdeReadWrite (REQ): Starting sector is 39045ca0, Number of WORDS 0x3500, DevSize 0x35
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f74f8000, count 6a00, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:4e2dd000
  ph data[0]=0:4e2dd000 (fff)
  get Phys(data[n=1+1000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:4e2de000
  ph data[0]=0:4e2dd000 (1fff)
  get Phys(data[n=1+2000]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:4e2df000
  ph data[0]=0:4e2dd000 (2fff)
  get Phys(data[n=1+3000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:4e2e0000
  ph data[0]=0:4e2dd000 (3fff)
  get Phys(data[n=1+4000]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:4e2e1000
  ph data[0]=0:4e2dd000 (4fff)
  get Phys(data[n=1+5000]=f74fd000)
AtapiVirtToPhysAddr_: f74fd000 -> 00000000:4e2e2000
  ph data[0]=0:4e2dd000 (5fff)
  get Phys(data[n=1+6000]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:4e2e3000
  set TERM
  ph data[0]=0:4e2dd000 (69ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf78019dc
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39045c20, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39045ca0, Count 0x35(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 3500, WordsLeft 3500
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 6a00, full size 6a00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b2c
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390457a0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390457a0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:4e14d000
  ph data[0]=0:4e14d000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:4e146000
  ph data[1]=0:4e146000 (fff)
  get Phys(data[n=2+1000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:4e147000
  ph data[1]=0:4e146000 (1fff)
  get Phys(data[n=2+2000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:4e148000
  ph data[1]=0:4e146000 (2fff)
  get Phys(data[n=2+3000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:4e149000
  ph data[1]=0:4e146000 (3fff)
  get Phys(data[n=2+4000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:4e14a000
  ph data[1]=0:4e146000 (4fff)
  get Phys(data[n=2+5000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:4e14b000
  ph data[1]=0:4e146000 (5fff)
  get Phys(data[n=2+6000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:4e14c000
  ph data[1]=0:4e146000 (6fff)
  get Phys(data[n=2+7000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:4e155000
  ph data[2]=0:4e155000 (fff)
  get Phys(data[n=3+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:4e14e000
  ph data[3]=0:4e14e000 (fff)
  get Phys(data[n=4+1000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:4e14f000
  ph data[3]=0:4e14e000 (1fff)
  get Phys(data[n=4+2000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:4e150000
  ph data[3]=0:4e14e000 (2fff)
  get Phys(data[n=4+3000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:4e151000
  ph data[3]=0:4e14e000 (3fff)
  get Phys(data[n=4+4000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:4e152000
  ph data[3]=0:4e14e000 (4fff)
  get Phys(data[n=4+5000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:4e153000
  ph data[3]=0:4e14e000 (5fff)
  get Phys(data[n=4+6000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:4e154000
  set TERM
  ph data[3]=0:4e14e000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390457a0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b2c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39045820, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39045820, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:4e15d000
  ph data[0]=0:4e15d000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:4e156000
  ph data[1]=0:4e156000 (fff)
  get Phys(data[n=2+1000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:4e157000
  ph data[1]=0:4e156000 (1fff)
  get Phys(data[n=2+2000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:4e158000
  ph data[1]=0:4e156000 (2fff)
  get Phys(data[n=2+3000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:4e159000
  ph data[1]=0:4e156000 (3fff)
  get Phys(data[n=2+4000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:4e15a000
  ph data[1]=0:4e156000 (4fff)
  get Phys(data[n=2+5000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:4e15b000
  ph data[1]=0:4e156000 (5fff)
  get Phys(data[n=2+6000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:4e15c000
  ph data[1]=0:4e156000 (6fff)
  get Phys(data[n=2+7000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:4e165000
  ph data[2]=0:4e165000 (fff)
  get Phys(data[n=3+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:4e15e000
  ph data[3]=0:4e15e000 (fff)
  get Phys(data[n=4+1000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:4e15f000
  ph data[3]=0:4e15e000 (1fff)
  get Phys(data[n=4+2000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:4e160000
  ph data[3]=0:4e15e000 (2fff)
  get Phys(data[n=4+3000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:4e161000
  ph data[3]=0:4e15e000 (3fff)
  get Phys(data[n=4+4000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:4e162000
  ph data[3]=0:4e15e000 (4fff)
  get Phys(data[n=4+5000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:4e163000
  ph data[3]=0:4e15e000 (5fff)
  get Phys(data[n=4+6000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:4e164000
  set TERM
  ph data[3]=0:4e15e000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b2c
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390458a0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390458a0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:4e16d000
  ph data[0]=0:4e16d000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:4e166000
  ph data[1]=0:4e166000 (fff)
  get Phys(data[n=2+1000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:4e167000
  ph data[1]=0:4e166000 (1fff)
  get Phys(data[n=2+2000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:4e168000
  ph data[1]=0:4e166000 (2fff)
  get Phys(data[n=2+3000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:4e169000
  ph data[1]=0:4e166000 (3fff)
  get Phys(data[n=2+4000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:4e16a000
  ph data[1]=0:4e166000 (4fff)
  get Phys(data[n=2+5000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:4e16b000
  ph data[1]=0:4e166000 (5fff)
  get Phys(data[n=2+6000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:4e16c000
  ph data[1]=0:4e166000 (6fff)
  get Phys(data[n=2+7000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:4e175000
  ph data[2]=0:4e175000 (fff)
  get Phys(data[n=3+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:4e16e000
  ph data[3]=0:4e16e000 (fff)
  get Phys(data[n=4+1000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:4e16f000
  ph data[3]=0:4e16e000 (1fff)
  get Phys(data[n=4+2000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:4e170000
  ph data[3]=0:4e16e000 (2fff)
  get Phys(data[n=4+3000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:4e171000
  ph data[3]=0:4e16e000 (3fff)
  get Phys(data[n=4+4000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:4e172000
  ph data[3]=0:4e16e000 (4fff)
  get Phys(data[n=4+5000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:4e173000
  ph data[3]=0:4e16e000 (5fff)
  get Phys(data[n=4+6000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:4e174000
  set TERM
  ph data[3]=0:4e16e000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b2c
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39045920, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39045920, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:4e17d000
  ph data[0]=0:4e17d000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:4e176000
  ph data[1]=0:4e176000 (fff)
  get Phys(data[n=2+1000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:4e177000
  ph data[1]=0:4e176000 (1fff)
  get Phys(data[n=2+2000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:4e178000
  ph data[1]=0:4e176000 (2fff)
  get Phys(data[n=2+3000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:4e179000
  ph data[1]=0:4e176000 (3fff)
  get Phys(data[n=2+4000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:4e17a000
  ph data[1]=0:4e176000 (4fff)
  get Phys(data[n=2+5000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:4e17b000
  ph data[1]=0:4e176000 (5fff)
  get Phys(data[n=2+6000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:4e17c000
  ph data[1]=0:4e176000 (6fff)
  get Phys(data[n=2+7000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:4e185000
  ph data[2]=0:4e185000 (fff)
  get Phys(data[n=3+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:4e17e000
  ph data[3]=0:4e17e000 (fff)
  get Phys(data[n=4+1000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:4e17f000
  ph data[3]=0:4e17e000 (1fff)
  get Phys(data[n=4+2000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:4e180000
  ph data[3]=0:4e17e000 (2fff)
  get Phys(data[n=4+3000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:4e181000
  ph data[3]=0:4e17e000 (3fff)
  get Phys(data[n=4+4000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:4e182000
  ph data[3]=0:4e17e000 (4fff)
  get Phys(data[n=4+5000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:4e183000
  ph data[3]=0:4e17e000 (5fff)
  get Phys(data[n=4+6000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:4e184000
  set TERM
  ph data[3]=0:4e17e000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39045820, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390458a0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39045920, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39045ce0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39045ce0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:4d9f6000
  ph data[0]=0:4d9f6000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:4d9f7000
  ph data[0]=0:4d9f6000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:4d9f8000
  ph data[0]=0:4d9f6000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:4d9f9000
  ph data[0]=0:4d9f6000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:4d9fa000
  ph data[0]=0:4d9f6000 (4fff)
  get Phys(data[n=1+5000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:4d9fb000
  ph data[0]=0:4d9f6000 (5fff)
  get Phys(data[n=1+6000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:4d9fc000
  ph data[0]=0:4d9f6000 (6fff)
  get Phys(data[n=1+7000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:4d9fd000
  ph data[0]=0:4d9f6000 (7fff)
  get Phys(data[n=1+8000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:4d9fe000
  ph data[0]=0:4d9f6000 (8fff)
  get Phys(data[n=1+9000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:4d9ff000
  ph data[0]=0:4d9f6000 (9fff)
  get Phys(data[n=1+a000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:4da00000
  ph data[0]=0:4d9f6000 (afff)
  get Phys(data[n=1+b000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:4da01000
  ph data[0]=0:4d9f6000 (bfff)
  get Phys(data[n=1+c000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:4da02000
  ph data[0]=0:4d9f6000 (cfff)
  get Phys(data[n=1+d000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:4da03000
  ph data[0]=0:4d9f6000 (dfff)
  get Phys(data[n=1+e000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:4da04000
  ph data[0]=0:4d9f6000 (efff)
  get Phys(data[n=1+f000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:4da05000
  set TERM
  ph data[0]=0:4d9f6000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39045ce0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x1, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39045d60, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39045d60, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:4da06000
  ph data[0]=0:4da06000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:4da07000
  ph data[0]=0:4da06000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:4da08000
  ph data[0]=0:4da06000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:4da09000
  ph data[0]=0:4da06000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:4da0a000
  ph data[0]=0:4da06000 (4fff)
  get Phys(data[n=1+5000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:4da0b000
  ph data[0]=0:4da06000 (5fff)
  get Phys(data[n=1+6000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:4da0c000
  ph data[0]=0:4da06000 (6fff)
  get Phys(data[n=1+7000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:4da0d000
  ph data[0]=0:4da06000 (7fff)
  get Phys(data[n=1+8000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:4da0e000
  ph data[0]=0:4da06000 (8fff)
  get Phys(data[n=1+9000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:4da0f000
  ph data[0]=0:4da06000 (9fff)
  get Phys(data[n=1+a000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:4da10000
  ph data[0]=0:4da06000 (afff)
  get Phys(data[n=1+b000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:4da11000
  ph data[0]=0:4da06000 (bfff)
  get Phys(data[n=1+c000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:4da12000
  ph data[0]=0:4da06000 (cfff)
  get Phys(data[n=1+d000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:4da13000
  ph data[0]=0:4da06000 (dfff)
  get Phys(data[n=1+e000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:4da14000
  ph data[0]=0:4da06000 (efff)
  get Phys(data[n=1+f000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:4da15000
  set TERM
  ph data[0]=0:4da06000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39045de0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39045de0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:4da16000
  ph data[0]=0:4da16000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:4da17000
  ph data[0]=0:4da16000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:4da18000
  ph data[0]=0:4da16000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:4da19000
  ph data[0]=0:4da16000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:4da1a000
  ph data[0]=0:4da16000 (4fff)
  get Phys(data[n=1+5000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:4da1b000
  ph data[0]=0:4da16000 (5fff)
  get Phys(data[n=1+6000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:4da1c000
  ph data[0]=0:4da16000 (6fff)
  get Phys(data[n=1+7000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:4da1d000
  ph data[0]=0:4da16000 (7fff)
  get Phys(data[n=1+8000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:4da1e000
  ph data[0]=0:4da16000 (8fff)
  get Phys(data[n=1+9000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:4da1f000
  ph data[0]=0:4da16000 (9fff)
  get Phys(data[n=1+a000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:4da20000
  ph data[0]=0:4da16000 (afff)
  get Phys(data[n=1+b000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:4da21000
  ph data[0]=0:4da16000 (bfff)
  get Phys(data[n=1+c000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:4da22000
  ph data[0]=0:4da16000 (cfff)
  get Phys(data[n=1+d000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:4da23000
  ph data[0]=0:4da16000 (dfff)
  get Phys(data[n=1+e000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:4da24000
  ph data[0]=0:4da16000 (efff)
  get Phys(data[n=1+f000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:4da25000
  set TERM
  ph data[0]=0:4da16000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39045e60, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39045e60, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:4da26000
  ph data[0]=0:4da26000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:4da27000
  ph data[0]=0:4da26000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:4da28000
  ph data[0]=0:4da26000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:4da29000
  ph data[0]=0:4da26000 (3fff)
  get Phys(data[n=1+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:4da2a000
  ph data[0]=0:4da26000 (4fff)
  get Phys(data[n=1+5000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:4da2b000
  ph data[0]=0:4da26000 (5fff)
  get Phys(data[n=1+6000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:4da2c000
  ph data[0]=0:4da26000 (6fff)
  get Phys(data[n=1+7000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:4da2d000
  ph data[0]=0:4da26000 (7fff)
  get Phys(data[n=1+8000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:4da2e000
  ph data[0]=0:4da26000 (8fff)
  get Phys(data[n=1+9000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:4da2f000
  ph data[0]=0:4da26000 (9fff)
  get Phys(data[n=1+a000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:4da30000
  ph data[0]=0:4da26000 (afff)
  get Phys(data[n=1+b000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:4da31000
  ph data[0]=0:4da26000 (bfff)
  get Phys(data[n=1+c000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:4da32000
  ph data[0]=0:4da26000 (cfff)
  get Phys(data[n=1+d000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:4da33000
  ph data[0]=0:4da26000 (dfff)
  get Phys(data[n=1+e000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:4da34000
  ph data[0]=0:4da26000 (efff)
  get Phys(data[n=1+f000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:4da35000
  set TERM
  ph data[0]=0:4da26000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39045d60, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39045de0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39045e60, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520afc
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390464e0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390464e0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:4ce8e000
  ph data[0]=0:4ce8e000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:4ce8f000
  ph data[0]=0:4ce8e000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:4ce88000
  ph data[1]=0:4ce88000 (fff)
  get Phys(data[n=2+1000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:4ce89000
  ph data[1]=0:4ce88000 (1fff)
  get Phys(data[n=2+2000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:4ce8a000
  ph data[1]=0:4ce88000 (2fff)
  get Phys(data[n=2+3000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:4ce8b000
  ph data[1]=0:4ce88000 (3fff)
  get Phys(data[n=2+4000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:4ce8c000
  ph data[1]=0:4ce88000 (4fff)
  get Phys(data[n=2+5000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:4ce8d000
  ph data[1]=0:4ce88000 (5fff)
  get Phys(data[n=2+6000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:4ce96000
  ph data[2]=0:4ce96000 (fff)
  get Phys(data[n=3+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:4ce97000
  ph data[2]=0:4ce96000 (1fff)
  get Phys(data[n=3+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:4ce90000
  ph data[3]=0:4ce90000 (fff)
  get Phys(data[n=4+1000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:4ce91000
  ph data[3]=0:4ce90000 (1fff)
  get Phys(data[n=4+2000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:4ce92000
  ph data[3]=0:4ce90000 (2fff)
  get Phys(data[n=4+3000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:4ce93000
  ph data[3]=0:4ce90000 (3fff)
  get Phys(data[n=4+4000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:4ce94000
  ph data[3]=0:4ce90000 (4fff)
  get Phys(data[n=4+5000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:4ce95000
  set TERM
  ph data[3]=0:4ce90000 (5fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390464e0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520afc
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39046560, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39046560, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:4ce9e000
  ph data[0]=0:4ce9e000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:4ce9f000
  ph data[0]=0:4ce9e000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:4ce98000
  ph data[1]=0:4ce98000 (fff)
  get Phys(data[n=2+1000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:4ce99000
  ph data[1]=0:4ce98000 (1fff)
  get Phys(data[n=2+2000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:4ce9a000
  ph data[1]=0:4ce98000 (2fff)
  get Phys(data[n=2+3000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:4ce9b000
  ph data[1]=0:4ce98000 (3fff)
  get Phys(data[n=2+4000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:4ce9c000
  ph data[1]=0:4ce98000 (4fff)
  get Phys(data[n=2+5000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:4ce9d000
  ph data[1]=0:4ce98000 (5fff)
  get Phys(data[n=2+6000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:4cea6000
  ph data[2]=0:4cea6000 (fff)
  get Phys(data[n=3+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:4cea7000
  ph data[2]=0:4cea6000 (1fff)
  get Phys(data[n=3+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:4cea0000
  ph data[3]=0:4cea0000 (fff)
  get Phys(data[n=4+1000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:4cea1000
  ph data[3]=0:4cea0000 (1fff)
  get Phys(data[n=4+2000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:4cea2000
  ph data[3]=0:4cea0000 (2fff)
  get Phys(data[n=4+3000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:4cea3000
  ph data[3]=0:4cea0000 (3fff)
  get Phys(data[n=4+4000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:4cea4000
  ph data[3]=0:4cea0000 (4fff)
  get Phys(data[n=4+5000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:4cea5000
  set TERM
  ph data[3]=0:4cea0000 (5fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520afc
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390465e0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390465e0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:4ceae000
  ph data[0]=0:4ceae000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:4ceaf000
  ph data[0]=0:4ceae000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:4cea8000
  ph data[1]=0:4cea8000 (fff)
  get Phys(data[n=2+1000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:4cea9000
  ph data[1]=0:4cea8000 (1fff)
  get Phys(data[n=2+2000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:4ceaa000
  ph data[1]=0:4cea8000 (2fff)
  get Phys(data[n=2+3000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:4ceab000
  ph data[1]=0:4cea8000 (3fff)
  get Phys(data[n=2+4000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:4ceac000
  ph data[1]=0:4cea8000 (4fff)
  get Phys(data[n=2+5000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:4cead000
  ph data[1]=0:4cea8000 (5fff)
  get Phys(data[n=2+6000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:4ceb6000
  ph data[2]=0:4ceb6000 (fff)
  get Phys(data[n=3+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:4ceb7000
  ph data[2]=0:4ceb6000 (1fff)
  get Phys(data[n=3+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:4ceb0000
  ph data[3]=0:4ceb0000 (fff)
  get Phys(data[n=4+1000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:4ceb1000
  ph data[3]=0:4ceb0000 (1fff)
  get Phys(data[n=4+2000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:4ceb2000
  ph data[3]=0:4ceb0000 (2fff)
  get Phys(data[n=4+3000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:4ceb3000
  ph data[3]=0:4ceb0000 (3fff)
  get Phys(data[n=4+4000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:4ceb4000
  ph data[3]=0:4ceb0000 (4fff)
  get Phys(data[n=4+5000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:4ceb5000
  set TERM
  ph data[3]=0:4ceb0000 (5fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520afc
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39046660, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39046660, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:4cebe000
  ph data[0]=0:4cebe000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:4cebf000
  ph data[0]=0:4cebe000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:4ceb8000
  ph data[1]=0:4ceb8000 (fff)
  get Phys(data[n=2+1000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:4ceb9000
  ph data[1]=0:4ceb8000 (1fff)
  get Phys(data[n=2+2000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:4ceba000
  ph data[1]=0:4ceb8000 (2fff)
  get Phys(data[n=2+3000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:4cebb000
  ph data[1]=0:4ceb8000 (3fff)
  get Phys(data[n=2+4000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:4cebc000
  ph data[1]=0:4ceb8000 (4fff)
  get Phys(data[n=2+5000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:4cebd000
  ph data[1]=0:4ceb8000 (5fff)
  get Phys(data[n=2+6000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:4cec6000
  ph data[2]=0:4cec6000 (fff)
  get Phys(data[n=3+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:4cec7000
  ph data[2]=0:4cec6000 (1fff)
  get Phys(data[n=3+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:4cec0000
  ph data[3]=0:4cec0000 (fff)
  get Phys(data[n=4+1000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:4cec1000
  ph data[3]=0:4cec0000 (1fff)
  get Phys(data[n=4+2000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:4cec2000
  ph data[3]=0:4cec0000 (2fff)
  get Phys(data[n=4+3000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:4cec3000
  ph data[3]=0:4cec0000 (3fff)
  get Phys(data[n=4+4000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:4cec4000
  ph data[3]=0:4cec0000 (4fff)
  get Phys(data[n=4+5000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:4cec5000
  set TERM
  ph data[3]=0:4cec0000 (5fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39046560, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390465e0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39046660, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b2c
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390462e0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390462e0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:4b617000
  ph data[0]=0:4b617000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:4b618000
  ph data[0]=0:4b617000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:4b619000
  ph data[0]=0:4b617000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:4b61a000
  ph data[0]=0:4b617000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:4b61b000
  ph data[0]=0:4b617000 (4fff)
  get Phys(data[n=1+5000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:4b61c000
  ph data[0]=0:4b617000 (5fff)
  get Phys(data[n=1+6000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:4b61d000
  ph data[0]=0:4b617000 (6fff)
  get Phys(data[n=1+7000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:4b616000
  ph data[1]=0:4b616000 (fff)
  get Phys(data[n=2+1000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:4b61f000
  ph data[2]=0:4b61f000 (fff)
  get Phys(data[n=3+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:4b620000
  ph data[2]=0:4b61f000 (1fff)
  get Phys(data[n=3+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:4b621000
  ph data[2]=0:4b61f000 (2fff)
  get Phys(data[n=3+3000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:4b622000
  ph data[2]=0:4b61f000 (3fff)
  get Phys(data[n=3+4000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:4b623000
  ph data[2]=0:4b61f000 (4fff)
  get Phys(data[n=3+5000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:4b624000
  ph data[2]=0:4b61f000 (5fff)
  get Phys(data[n=3+6000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:4b625000
  ph data[2]=0:4b61f000 (6fff)
  get Phys(data[n=3+7000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:4b61e000
  set TERM
  ph data[3]=0:4b61e000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390462e0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b2c
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39046360, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39046360, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:4b627000
  ph data[0]=0:4b627000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:4b628000
  ph data[0]=0:4b627000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:4b629000
  ph data[0]=0:4b627000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:4b62a000
  ph data[0]=0:4b627000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:4b62b000
  ph data[0]=0:4b627000 (4fff)
  get Phys(data[n=1+5000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:4b62c000
  ph data[0]=0:4b627000 (5fff)
  get Phys(data[n=1+6000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:4b62d000
  ph data[0]=0:4b627000 (6fff)
  get Phys(data[n=1+7000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:4b626000
  ph data[1]=0:4b626000 (fff)
  get Phys(data[n=2+1000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:4b62f000
  ph data[2]=0:4b62f000 (fff)
  get Phys(data[n=3+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:4b630000
  ph data[2]=0:4b62f000 (1fff)
  get Phys(data[n=3+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:4b631000
  ph data[2]=0:4b62f000 (2fff)
  get Phys(data[n=3+3000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:4b632000
  ph data[2]=0:4b62f000 (3fff)
  get Phys(data[n=3+4000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:4b633000
  ph data[2]=0:4b62f000 (4fff)
  get Phys(data[n=3+5000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:4b634000
  ph data[2]=0:4b62f000 (5fff)
  get Phys(data[n=3+6000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:4b635000
  ph data[2]=0:4b62f000 (6fff)
  get Phys(data[n=3+7000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:4b62e000
  set TERM
  ph data[3]=0:4b62e000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520998
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39046360, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b2c
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390463e0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390463e0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:4b637000
  ph data[0]=0:4b637000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:4b638000
  ph data[0]=0:4b637000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:4b639000
  ph data[0]=0:4b637000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:4b63a000
  ph data[0]=0:4b637000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:4b63b000
  ph data[0]=0:4b637000 (4fff)
  get Phys(data[n=1+5000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:4b63c000
  ph data[0]=0:4b637000 (5fff)
  get Phys(data[n=1+6000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:4b63d000
  ph data[0]=0:4b637000 (6fff)
  get Phys(data[n=1+7000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:4b636000
  ph data[1]=0:4b636000 (fff)
  get Phys(data[n=2+1000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:4b63f000
  ph data[2]=0:4b63f000 (fff)
  get Phys(data[n=3+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:4b640000
  ph data[2]=0:4b63f000 (1fff)
  get Phys(data[n=3+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:4b641000
  ph data[2]=0:4b63f000 (2fff)
  get Phys(data[n=3+3000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:4b642000
  ph data[2]=0:4b63f000 (3fff)
  get Phys(data[n=3+4000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:4b643000
  ph data[2]=0:4b63f000 (4fff)
  get Phys(data[n=3+5000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:4b644000
  ph data[2]=0:4b63f000 (5fff)
  get Phys(data[n=3+6000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:4b645000
  ph data[2]=0:4b63f000 (6fff)
  get Phys(data[n=3+7000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:4b63e000
  set TERM
  ph data[3]=0:4b63e000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75209d4
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390463e0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b2c
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39046460, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39046460, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:4b647000
  ph data[0]=0:4b647000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:4b648000
  ph data[0]=0:4b647000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:4b649000
  ph data[0]=0:4b647000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:4b64a000
  ph data[0]=0:4b647000 (3fff)
  get Phys(data[n=1+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:4b64b000
  ph data[0]=0:4b647000 (4fff)
  get Phys(data[n=1+5000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:4b64c000
  ph data[0]=0:4b647000 (5fff)
  get Phys(data[n=1+6000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:4b64d000
  ph data[0]=0:4b647000 (6fff)
  get Phys(data[n=1+7000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:4b646000
  ph data[1]=0:4b646000 (fff)
  get Phys(data[n=2+1000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:4b64f000
  ph data[2]=0:4b64f000 (fff)
  get Phys(data[n=3+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:4b650000
  ph data[2]=0:4b64f000 (1fff)
  get Phys(data[n=3+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:4b651000
  ph data[2]=0:4b64f000 (2fff)
  get Phys(data[n=3+3000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:4b652000
  ph data[2]=0:4b64f000 (3fff)
  get Phys(data[n=3+4000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:4b653000
  ph data[2]=0:4b64f000 (4fff)
  get Phys(data[n=3+5000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:4b654000
  ph data[2]=0:4b64f000 (5fff)
  get Phys(data[n=3+6000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:4b655000
  ph data[2]=0:4b64f000 (6fff)
  get Phys(data[n=3+7000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:4b64e000
  set TERM
  ph data[3]=0:4b64e000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39046460, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390466f0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390466f0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:4b5f8000
  ph data[0]=0:4b5f8000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:4b5f9000
  ph data[0]=0:4b5f8000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:4b5fa000
  ph data[0]=0:4b5f8000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:4b5fb000
  ph data[0]=0:4b5f8000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:4b5fc000
  ph data[0]=0:4b5f8000 (4fff)
  get Phys(data[n=1+5000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:4b5fd000
  ph data[0]=0:4b5f8000 (5fff)
  get Phys(data[n=1+6000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:4b5f6000
  ph data[1]=0:4b5f6000 (fff)
  get Phys(data[n=2+1000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:4b5f7000
  ph data[1]=0:4b5f6000 (1fff)
  get Phys(data[n=2+2000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:4b600000
  ph data[2]=0:4b600000 (fff)
  get Phys(data[n=3+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:4b601000
  ph data[2]=0:4b600000 (1fff)
  get Phys(data[n=3+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:4b602000
  ph data[2]=0:4b600000 (2fff)
  get Phys(data[n=3+3000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:4b603000
  ph data[2]=0:4b600000 (3fff)
  get Phys(data[n=3+4000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:4b604000
  ph data[2]=0:4b600000 (4fff)
  get Phys(data[n=3+5000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:4b605000
  ph data[2]=0:4b600000 (5fff)
  get Phys(data[n=3+6000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:4b5fe000
  ph data[3]=0:4b5fe000 (fff)
  get Phys(data[n=4+1000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:4b5ff000
  set TERM
  ph data[3]=0:4b5fe000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390466f0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39046770, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39046770, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:4b608000
  ph data[0]=0:4b608000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:4b609000
  ph data[0]=0:4b608000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:4b60a000
  ph data[0]=0:4b608000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:4b60b000
  ph data[0]=0:4b608000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:4b60c000
  ph data[0]=0:4b608000 (4fff)
  get Phys(data[n=1+5000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:4b60d000
  ph data[0]=0:4b608000 (5fff)
  get Phys(data[n=1+6000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:4b606000
  ph data[1]=0:4b606000 (fff)
  get Phys(data[n=2+1000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:4b607000
  ph data[1]=0:4b606000 (1fff)
  get Phys(data[n=2+2000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:4b610000
  ph data[2]=0:4b610000 (fff)
  get Phys(data[n=3+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:4b611000
  ph data[2]=0:4b610000 (1fff)
  get Phys(data[n=3+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:4b612000
  ph data[2]=0:4b610000 (2fff)
  get Phys(data[n=3+3000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:4b613000
  ph data[2]=0:4b610000 (3fff)
  get Phys(data[n=3+4000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:4b614000
  ph data[2]=0:4b610000 (4fff)
  get Phys(data[n=3+5000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:4b615000
  ph data[2]=0:4b610000 (5fff)
  get Phys(data[n=3+6000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:4b656000
  ph data[3]=0:4b656000 (fff)
  get Phys(data[n=4+1000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:4b60f000
  set TERM
  ph data[4]=0:4b60f000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390467f0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390467f0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:4b658000
  ph data[0]=0:4b658000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:4b659000
  ph data[0]=0:4b658000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:4b65a000
  ph data[0]=0:4b658000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:4b65b000
  ph data[0]=0:4b658000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:4b65c000
  ph data[0]=0:4b658000 (4fff)
  get Phys(data[n=1+5000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:4b65d000
  ph data[0]=0:4b658000 (5fff)
  get Phys(data[n=1+6000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:4b65e000
  ph data[0]=0:4b658000 (6fff)
  get Phys(data[n=1+7000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:4b657000
  ph data[1]=0:4b657000 (fff)
  get Phys(data[n=2+1000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:4b660000
  ph data[2]=0:4b660000 (fff)
  get Phys(data[n=3+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:4b661000
  ph data[2]=0:4b660000 (1fff)
  get Phys(data[n=3+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:4b662000
  ph data[2]=0:4b660000 (2fff)
  get Phys(data[n=3+3000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:4b663000
  ph data[2]=0:4b660000 (3fff)
  get Phys(data[n=3+4000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:4b664000
  ph data[2]=0:4b660000 (4fff)
  get Phys(data[n=3+5000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:4b665000
  ph data[2]=0:4b660000 (5fff)
  get Phys(data[n=3+6000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:4b666000
  ph data[2]=0:4b660000 (6fff)
  get Phys(data[n=3+7000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:4b65f000
  set TERM
  ph data[3]=0:4b65f000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b9c
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39046770, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x5, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39046870, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39046870, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:4b668000
  ph data[0]=0:4b668000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:4b669000
  ph data[0]=0:4b668000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:4b66a000
  ph data[0]=0:4b668000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:4b66b000
  ph data[0]=0:4b668000 (3fff)
  get Phys(data[n=1+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:4b66c000
  ph data[0]=0:4b668000 (4fff)
  get Phys(data[n=1+5000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:4b66d000
  ph data[0]=0:4b668000 (5fff)
  get Phys(data[n=1+6000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:4b66e000
  ph data[0]=0:4b668000 (6fff)
  get Phys(data[n=1+7000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:4b667000
  ph data[1]=0:4b667000 (fff)
  get Phys(data[n=2+1000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:4b670000
  ph data[2]=0:4b670000 (fff)
  get Phys(data[n=3+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:4b671000
  ph data[2]=0:4b670000 (1fff)
  get Phys(data[n=3+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:4b672000
  ph data[2]=0:4b670000 (2fff)
  get Phys(data[n=3+3000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:4b673000
  ph data[2]=0:4b670000 (3fff)
  get Phys(data[n=3+4000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:4b674000
  ph data[2]=0:4b670000 (4fff)
  get Phys(data[n=3+5000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:4b675000
  ph data[2]=0:4b670000 (5fff)
  get Phys(data[n=3+6000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:4b676000
  ph data[2]=0:4b670000 (6fff)
  get Phys(data[n=3+7000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:4b66f000
  set TERM
  ph data[3]=0:4b66f000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390467f0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39046870, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520afc
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39046af0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39046af0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f74ea000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:4b5c0000
  ph data[0]=0:4b5c0000 (fff)
  get Phys(data[n=1+1000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:4b5b9000
  ph data[1]=0:4b5b9000 (fff)
  get Phys(data[n=2+1000]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:4b5ba000
  ph data[1]=0:4b5b9000 (1fff)
  get Phys(data[n=2+2000]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:4b5bb000
  ph data[1]=0:4b5b9000 (2fff)
  get Phys(data[n=2+3000]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:4b5bc000
  ph data[1]=0:4b5b9000 (3fff)
  get Phys(data[n=2+4000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:4b5bd000
  ph data[1]=0:4b5b9000 (4fff)
  get Phys(data[n=2+5000]=f74f0000)
AtapiVirtToPhysAddr_: f74f0000 -> 00000000:4b5be000
  ph data[1]=0:4b5b9000 (5fff)
  get Phys(data[n=2+6000]=f74f1000)
AtapiVirtToPhysAddr_: f74f1000 -> 00000000:4b5bf000
  ph data[1]=0:4b5b9000 (6fff)
  get Phys(data[n=2+7000]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:4b5c8000
  ph data[2]=0:4b5c8000 (fff)
  get Phys(data[n=3+1000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:4b5c1000
  ph data[3]=0:4b5c1000 (fff)
  get Phys(data[n=4+1000]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:4b5c2000
  ph data[3]=0:4b5c1000 (1fff)
  get Phys(data[n=4+2000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:4b5c3000
  ph data[3]=0:4b5c1000 (2fff)
  get Phys(data[n=4+3000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:4b5c5000
  ph data[4]=0:4b5c5000 (fff)
  get Phys(data[n=5+1000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:4b5c6000
  ph data[4]=0:4b5c5000 (1fff)
  get Phys(data[n=5+2000]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:4b5c7000
  ph data[4]=0:4b5c5000 (2fff)
  get Phys(data[n=5+3000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:4b5d0000
  set TERM
  ph data[5]=0:4b5d0000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39046af0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x6, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520afc
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39046b70, OrigWordsRequested 0x2500, DevSize 0x25
IdeReadWrite (REQ): Starting sector is 39046b70, Number of WORDS 0x2500, DevSize 0x25
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f74fa000, count 4a00, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:4b5c9000
  ph data[0]=0:4b5c9000 (fff)
  get Phys(data[n=1+1000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:4b5ca000
  ph data[0]=0:4b5c9000 (1fff)
  get Phys(data[n=1+2000]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:4b5cb000
  ph data[0]=0:4b5c9000 (2fff)
  get Phys(data[n=1+3000]=f74fd000)
AtapiVirtToPhysAddr_: f74fd000 -> 00000000:4b5cc000
  ph data[0]=0:4b5c9000 (3fff)
  get Phys(data[n=1+4000]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:4b5cd000
  set TERM
  ph data[0]=0:4b5c9000 (49ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39046b70, Count 0x25(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 2500, WordsLeft 2500
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 4a00, full size 4a00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b2c
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390468f0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390468f0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:4afca000
  ph data[0]=0:4afca000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:4afcb000
  ph data[0]=0:4afca000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:4afcc000
  ph data[0]=0:4afca000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:4afcd000
  ph data[0]=0:4afca000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:4afce000
  ph data[0]=0:4afca000 (4fff)
  get Phys(data[n=1+5000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:4afcf000
  ph data[0]=0:4afca000 (5fff)
  get Phys(data[n=1+6000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:4afc8000
  ph data[1]=0:4afc8000 (fff)
  get Phys(data[n=2+1000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:4afc9000
  ph data[1]=0:4afc8000 (1fff)
  get Phys(data[n=2+2000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:4afd2000
  ph data[2]=0:4afd2000 (fff)
  get Phys(data[n=3+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:4afd3000
  ph data[2]=0:4afd2000 (1fff)
  get Phys(data[n=3+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:4afd4000
  ph data[2]=0:4afd2000 (2fff)
  get Phys(data[n=3+3000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:4afd5000
  ph data[2]=0:4afd2000 (3fff)
  get Phys(data[n=3+4000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:4afd6000
  ph data[2]=0:4afd2000 (4fff)
  get Phys(data[n=3+5000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:4afd7000
  ph data[2]=0:4afd2000 (5fff)
  get Phys(data[n=3+6000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:4afd0000
  ph data[3]=0:4afd0000 (fff)
  get Phys(data[n=4+1000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:4afd1000
  set TERM
  ph data[3]=0:4afd0000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390468f0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b2c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39046970, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39046970, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:4afda000
  ph data[0]=0:4afda000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:4afdb000
  ph data[0]=0:4afda000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:4afdc000
  ph data[0]=0:4afda000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:4afdd000
  ph data[0]=0:4afda000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:4afde000
  ph data[0]=0:4afda000 (4fff)
  get Phys(data[n=1+5000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:4afdf000
  ph data[0]=0:4afda000 (5fff)
  get Phys(data[n=1+6000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:4afd8000
  ph data[1]=0:4afd8000 (fff)
  get Phys(data[n=2+1000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:4afd9000
  ph data[1]=0:4afd8000 (1fff)
  get Phys(data[n=2+2000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:4afe2000
  ph data[2]=0:4afe2000 (fff)
  get Phys(data[n=3+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:4afe3000
  ph data[2]=0:4afe2000 (1fff)
  get Phys(data[n=3+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:4afe4000
  ph data[2]=0:4afe2000 (2fff)
  get Phys(data[n=3+3000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:4afe5000
  ph data[2]=0:4afe2000 (3fff)
  get Phys(data[n=3+4000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:4afe6000
  ph data[2]=0:4afe2000 (4fff)
  get Phys(data[n=3+5000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:4afe7000
  ph data[2]=0:4afe2000 (5fff)
  get Phys(data[n=3+6000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:4afe0000
  ph data[3]=0:4afe0000 (fff)
  get Phys(data[n=4+1000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:4afe1000
  set TERM
  ph data[3]=0:4afe0000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b2c
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390469f0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390469f0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:4afea000
  ph data[0]=0:4afea000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:4afeb000
  ph data[0]=0:4afea000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:4afec000
  ph data[0]=0:4afea000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:4afed000
  ph data[0]=0:4afea000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:4afee000
  ph data[0]=0:4afea000 (4fff)
  get Phys(data[n=1+5000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:4afef000
  ph data[0]=0:4afea000 (5fff)
  get Phys(data[n=1+6000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:4afe8000
  ph data[1]=0:4afe8000 (fff)
  get Phys(data[n=2+1000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:4afe9000
  ph data[1]=0:4afe8000 (1fff)
  get Phys(data[n=2+2000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:4aff2000
  ph data[2]=0:4aff2000 (fff)
  get Phys(data[n=3+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:4aff3000
  ph data[2]=0:4aff2000 (1fff)
  get Phys(data[n=3+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:4aff4000
  ph data[2]=0:4aff2000 (2fff)
  get Phys(data[n=3+3000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:4aff5000
  ph data[2]=0:4aff2000 (3fff)
  get Phys(data[n=3+4000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:4aff6000
  ph data[2]=0:4aff2000 (4fff)
  get Phys(data[n=3+5000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:4aff7000
  ph data[2]=0:4aff2000 (5fff)
  get Phys(data[n=3+6000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:4aff0000
  ph data[3]=0:4aff0000 (fff)
  get Phys(data[n=4+1000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:4aff1000
  set TERM
  ph data[3]=0:4aff0000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520a00
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39046970, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520b2c
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39046a70, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39046a70, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:4affa000
  ph data[0]=0:4affa000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:4affb000
  ph data[0]=0:4affa000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:4affc000
  ph data[0]=0:4affa000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:4affd000
  ph data[0]=0:4affa000 (3fff)
  get Phys(data[n=1+4000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:4affe000
  ph data[0]=0:4affa000 (4fff)
  get Phys(data[n=1+5000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:4afff000
  ph data[0]=0:4affa000 (5fff)
  get Phys(data[n=1+6000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:4aff8000
  ph data[1]=0:4aff8000 (fff)
  get Phys(data[n=2+1000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:4aff9000
  ph data[1]=0:4aff8000 (1fff)
  get Phys(data[n=2+2000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:4b002000
  ph data[2]=0:4b002000 (fff)
  get Phys(data[n=3+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:4b003000
  ph data[2]=0:4b002000 (1fff)
  get Phys(data[n=3+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:4b004000
  ph data[2]=0:4b002000 (2fff)
  get Phys(data[n=3+3000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:4b005000
  ph data[2]=0:4b002000 (3fff)
  get Phys(data[n=3+4000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:4b006000
  ph data[2]=0:4b002000 (4fff)
  get Phys(data[n=3+5000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:4b007000
  ph data[2]=0:4b002000 (5fff)
  get Phys(data[n=3+6000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:4b000000
  ph data[3]=0:4b000000 (fff)
  get Phys(data[n=4+1000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:4b001000
  set TERM
  ph data[3]=0:4b000000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520a00
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390469f0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39046a70, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39046ba0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39046ba0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:4af8b000
  ph data[0]=0:4af8b000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:4af8c000
  ph data[0]=0:4af8b000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:4af8d000
  ph data[0]=0:4af8b000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:4af8e000
  ph data[0]=0:4af8b000 (3fff)
  get Phys(data[n=1+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:4af87000
  ph data[1]=0:4af87000 (fff)
  get Phys(data[n=2+1000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:4af88000
  ph data[1]=0:4af87000 (1fff)
  get Phys(data[n=2+2000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:4af89000
  ph data[1]=0:4af87000 (2fff)
  get Phys(data[n=2+3000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:4af8a000
  ph data[1]=0:4af87000 (3fff)
  get Phys(data[n=2+4000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:4af93000
  ph data[2]=0:4af93000 (fff)
  get Phys(data[n=3+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:4af94000
  ph data[2]=0:4af93000 (1fff)
  get Phys(data[n=3+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:4af95000
  ph data[2]=0:4af93000 (2fff)
  get Phys(data[n=3+3000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:4af96000
  ph data[2]=0:4af93000 (3fff)
  get Phys(data[n=3+4000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:4af8f000
  ph data[3]=0:4af8f000 (fff)
  get Phys(data[n=4+1000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:4af90000
  ph data[3]=0:4af8f000 (1fff)
  get Phys(data[n=4+2000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:4af91000
  ph data[3]=0:4af8f000 (2fff)
  get Phys(data[n=4+3000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:4af92000
  set TERM
  ph data[3]=0:4af8f000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39046ba0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39046c20, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39046c20, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:4af9b000
  ph data[0]=0:4af9b000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:4af9c000
  ph data[0]=0:4af9b000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:4af9d000
  ph data[0]=0:4af9b000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:4af9e000
  ph data[0]=0:4af9b000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:4af97000
  ph data[1]=0:4af97000 (fff)
  get Phys(data[n=2+1000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:4af98000
  ph data[1]=0:4af97000 (1fff)
  get Phys(data[n=2+2000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:4af99000
  ph data[1]=0:4af97000 (2fff)
  get Phys(data[n=2+3000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:4af9a000
  ph data[1]=0:4af97000 (3fff)
  get Phys(data[n=2+4000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:4afa3000
  ph data[2]=0:4afa3000 (fff)
  get Phys(data[n=3+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:4afa4000
  ph data[2]=0:4afa3000 (1fff)
  get Phys(data[n=3+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:4afa5000
  ph data[2]=0:4afa3000 (2fff)
  get Phys(data[n=3+3000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:4afa6000
  ph data[2]=0:4afa3000 (3fff)
  get Phys(data[n=3+4000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:4af9f000
  ph data[3]=0:4af9f000 (fff)
  get Phys(data[n=4+1000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:4afa0000
  ph data[3]=0:4af9f000 (1fff)
  get Phys(data[n=4+2000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:4afa1000
  ph data[3]=0:4af9f000 (2fff)
  get Phys(data[n=4+3000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:4afa2000
  set TERM
  ph data[3]=0:4af9f000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520d1c
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39046ca0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39046ca0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:4afab000
  ph data[0]=0:4afab000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:4afac000
  ph data[0]=0:4afab000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:4afad000
  ph data[0]=0:4afab000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:4afae000
  ph data[0]=0:4afab000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:4afa7000
  ph data[1]=0:4afa7000 (fff)
  get Phys(data[n=2+1000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:4afa8000
  ph data[1]=0:4afa7000 (1fff)
  get Phys(data[n=2+2000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:4afa9000
  ph data[1]=0:4afa7000 (2fff)
  get Phys(data[n=2+3000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:4afaa000
  ph data[1]=0:4afa7000 (3fff)
  get Phys(data[n=2+4000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:4afb3000
  ph data[2]=0:4afb3000 (fff)
  get Phys(data[n=3+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:4afb4000
  ph data[2]=0:4afb3000 (1fff)
  get Phys(data[n=3+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:4afb5000
  ph data[2]=0:4afb3000 (2fff)
  get Phys(data[n=3+3000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:4afb6000
  ph data[2]=0:4afb3000 (3fff)
  get Phys(data[n=3+4000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:4afaf000
  ph data[3]=0:TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7508d00
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f750f000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:3f7ae000
  ph data[0]=0:3f7ae000 (fff)
  get Phys(data[n=1+1000]=f7510000)
AtapiVirtToPhysAddr_: f7510000 -> 00000000:3f7af000
  set TERM
  ph data[0]=0:3f7ae000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7509174
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f750f000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:3f79e000
  ph data[0]=0:3f79e000 (fff)
  get Phys(data[n=1+1000]=f7510000)
AtapiVirtToPhysAddr_: f7510000 -> 00000000:3f79f000
  set TERM
  ph data[0]=0:3f79e000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7508d00
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f750f000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:3f74e000
  ph data[0]=0:3f74e000 (fff)
  get Phys(data[n=1+1000]=f7510000)
AtapiVirtToPhysAddr_: f7510000 -> 00000000:3f74f000
  set TERM
  ph data[0]=0:3f74e000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7508d00
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f750f000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:3f736000
  ph data[0]=0:3f736000 (fff)
  get Phys(data[n=1+1000]=f7510000)
AtapiVirtToPhysAddr_: f7510000 -> 00000000:3f737000
  set TERM
  ph data[0]=0:3f736000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7509230
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39058700, OrigWordsRequested 0x400, DevSize 0x4
IdeReadWrite (REQ): Starting sector is 39058700, Number of WORDS 0x400, DevSize 0x4
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f750f000, count 800, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:3f726000
  set TERM
  ph data[0]=0:3f726000 (7ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39058700, Count 0x4(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 400, WordsLeft 400
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 800, full size 800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7508d00
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f750f000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:3f716000
  ph data[0]=0:3f716000 (fff)
  get Phys(data[n=1+1000]=f7510000)
AtapiVirtToPhysAddr_: f7510000 -> 00000000:3f717000
  set TERM
  ph data[0]=0:3f716000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7509174
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f750f000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:3f706000
  ph data[0]=0:3f706000 (fff)
  get Phys(data[n=1+1000]=f7510000)
AtapiVirtToPhysAddr_: f7510000 -> 00000000:3f707000
  set TERM
  ph data[0]=0:3f706000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7508d00
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f750f000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:3f6ee000
  ph data[0]=0:3f6ee000 (fff)
  get Phys(data[n=1+1000]=f7510000)
AtapiVirtToPhysAddr_: f7510000 -> 00000000:3f6ef000
  set TERM
  ph data[0]=0:3f6ee000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7508d00
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f750f000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:3f6e6000
  ph data[0]=0:3f6e6000 (fff)
  get Phys(data[n=1+1000]=f7510000)
AtapiVirtToPhysAddr_: f7510000 -> 00000000:3f6df000
  set TERM
  ph data[1]=0:3f6df000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x2, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7509230
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39058720, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 39058720, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f750f000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:3f6c6000
  set TERM
  ph data[0]=0:3f6c6000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39058720, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75091e0
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffe250, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffe250, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f74e8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f74e8000)
AtapiVirtToPhysAddr_: f74e8000 -> 00000000:3f6c0000
  ph data[0]=0:3f6c0000 (fff)
  get Phys(data[n=1+1000]=f74e9000)
AtapiVirtToPhysAddr_: f74e9000 -> 00000000:3f6c1000
  ph data[0]=0:3f6c0000 (1fff)
  get Phys(data[n=1+2000]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:3f6c2000
  ph data[0]=0:3f6c0000 (2fff)
  get Phys(data[n=1+3000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:3f6c3000
  ph data[0]=0:3f6c0000 (3fff)
  get Phys(data[n=1+4000]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:3f944000
  ph data[1]=0:3f944000 (fff)
  get Phys(data[n=2+1000]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:3f945000
  ph data[1]=0:3f944000 (1fff)
  get Phys(data[n=2+2000]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:3f94e000
  ph data[2]=0:3f94e000 (fff)
  get Phys(data[n=3+1000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:3f94f000
  ph data[2]=0:3f94e000 (1fff)
  get Phys(data[n=3+2000]=f74f0000)
AtapiVirtToPhysAddr_: f74f0000 -> 00000000:3f950000
  ph data[2]=0:3f94e000 (2fff)
  get Phys(data[n=3+3000]=f74f1000)
AtapiVirtToPhysAddr_: f74f1000 -> 00000000:3f951000
  ph data[2]=0:3f94e000 (3fff)
  get Phys(data[n=3+4000]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:3f952000
  ph data[2]=0:3f94e000 (4fff)
  get Phys(data[n=3+5000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:3f953000
  ph data[2]=0:3f94e000 (5fff)
  get Phys(data[n=3+6000]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:3f94c000
  ph data[3]=0:3f94c000 (fff)
  get Phys(data[n=4+1000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:3f94d000
  ph data[3]=0:3f94c000 (1fff)
  get Phys(data[n=4+2000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:3f956000
  ph data[4]=0:3f956000 (fff)
  get Phys(data[n=5+1000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:3f957000
  set TERM
  ph data[4]=0:3f956000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffe250, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x5, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75091e0
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffe2d0, OrigWordsRequested 0x3900, DevSize 0x39
IdeReadWrite (REQ): Starting sector is 38ffe2d0, Number of WORDS 0x3900, DevSize 0x39
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f74f8000, count 7200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:3f958000
  ph data[0]=0:3f958000 (fff)
  get Phys(data[n=1+1000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:3f959000
  ph data[0]=0:3f958000 (1fff)
  get Phys(data[n=1+2000]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:3f95a000
  ph data[0]=0:3f958000 (2fff)
  get Phys(data[n=1+3000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:3f95b000
  ph data[0]=0:3f958000 (3fff)
  get Phys(data[n=1+4000]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:3f954000
  ph data[1]=0:3f954000 (fff)
  get Phys(data[n=2+1000]=f74fd000)
AtapiVirtToPhysAddr_: f74fd000 -> 00000000:3f955000
  ph data[1]=0:3f954000 (1fff)
  get Phys(data[n=2+2000]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:3f95e000
  ph data[2]=0:3f95e000 (fff)
  get Phys(data[n=3+1000]=f74ff000)
AtapiVirtToPhysAddr_: f74ff000 -> 00000000:3f95f000
  set TERM
  ph data[2]=0:3f95e000 (11ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffe2d0, Count 0x39(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x3, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 3900, WordsLeft 3900
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 7200, full size 7200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf750960c
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffe250, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38ffe250, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f750f000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:3eca9000
  ph data[0]=0:3eca9000 (fff)
  get Phys(data[n=1+1000]=f7510000)
AtapiVirtToPhysAddr_: f7510000 -> 00000000:3ecaa000
  set TERM
  ph data[0]=0:3eca9000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffe250, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75091e0
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffe1c0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffe1c0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f74ee000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:3ecc0000
  ph data[0]=0:3ecc0000 (fff)
  get Phys(data[n=1+1000]=f74ef000)
AtapiVirtToPhysAddr_: f74ef000 -> 00000000:3ecc1000
  ph data[0]=0:3ecc0000 (1fff)
  get Phys(data[n=1+2000]=f74f0000)
AtapiVirtToPhysAddr_: f74f0000 -> 00000000:3ecb2000
  ph data[1]=0:3ecb2000 (fff)
  get Phys(data[n=2+1000]=f74f1000)
AtapiVirtToPhysAddr_: f74f1000 -> 00000000:3ecb3000
  ph data[1]=0:3ecb2000 (1fff)
  get Phys(data[n=2+2000]=f74f2000)
AtapiVirtToPhysAddr_: f74f2000 -> 00000000:3ecbc000
  ph data[2]=0:3ecbc000 (fff)
  get Phys(data[n=3+1000]=f74f3000)
AtapiVirtToPhysAddr_: f74f3000 -> 00000000:3ecbd000
  ph data[2]=0:3ecbc000 (1fff)
  get Phys(data[n=3+2000]=f74f4000)
AtapiVirtToPhysAddr_: f74f4000 -> 00000000:3ecbe000
  ph data[2]=0:3ecbc000 (2fff)
  get Phys(data[n=3+3000]=f74f5000)
AtapiVirtToPhysAddr_: f74f5000 -> 00000000:3ecbf000
  ph data[2]=0:3ecbc000 (3fff)
  get Phys(data[n=3+4000]=f74f6000)
AtapiVirtToPhysAddr_: f74f6000 -> 00000000:3ecc8000
  ph data[3]=0:3ecc8000 (fff)
  get Phys(data[n=4+1000]=f74f7000)
AtapiVirtToPhysAddr_: f74f7000 -> 00000000:3ecc9000
  ph data[3]=0:3ecc8000 (1fff)
  get Phys(data[n=4+2000]=f74f8000)
AtapiVirtToPhysAddr_: f74f8000 -> 00000000:3ecba000
  ph data[4]=0:3ecba000 (fff)
  get Phys(data[n=5+1000]=f74f9000)
AtapiVirtToPhysAddr_: f74f9000 -> 00000000:3ecbb000
  ph data[4]=0:3ecba000 (1fff)
  get Phys(data[n=5+2000]=f74fa000)
AtapiVirtToPhysAddr_: f74fa000 -> 00000000:3ecc4000
  ph data[5]=0:3ecc4000 (fff)
  get Phys(data[n=6+1000]=f74fb000)
AtapiVirtToPhysAddr_: f74fb000 -> 00000000:3ecc5000
  ph data[5]=0:3ecc4000 (1fff)
  get Phys(data[n=6+2000]=f74fc000)
AtapiVirtToPhysAddr_: f74fc000 -> 00000000:3ecc6000
  ph data[5]=0:3ecc4000 (2fff)
  get Phys(data[n=6+3000]=f74fd000)
AtapiVirtToPhysAddr_: f74fd000 -> 00000000:3ecc7000
  set TERM
  ph data[5]=0:3ecc4000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffe1c0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x6, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75091e0
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffe240, OrigWordsRequested 0xd00, DevSize 0xd
IdeReadWrite (REQ): Starting sector is 38ffe240, Number of WORDS 0xd00, DevSize 0xd
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f74fe000, count 1a00, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:3ecd0000
  ph data[0]=0:3ecd0000 (fff)
  get Phys(data[n=1+1000]=f74ff000)
AtapiVirtToPhysAddr_: f74ff000 -> 00000000:3ecd1000
  set TERM
  ph data[0]=0:3ecd0000 (19ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffe240, Count 0xd(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered d00, WordsLeft d00
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 1a00, full size 1a00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf750960c
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffe1c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38ffe1c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f750f000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:3ec68000
  ph data[0]=0:3ec68000 (fff)
  get Phys(data[n=1+1000]=f7510000)
AtapiVirtToPhysAddr_: f7510000 -> 00000000:3ec69000
  set TERM
  ph data[0]=0:3ec68000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffe1c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75091e0
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000210, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000210, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:3ec63000
  ph data[0]=0:3ec63000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:3ec64000
  ph data[0]=0:3ec63000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:3ec65000
  ph data[0]=0:3ec63000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:3ec6e000
  ph data[1]=0:3ec6e000 (fff)
  get Phys(data[n=2+1000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:3ec6f000
  ph data[1]=0:3ec6e000 (1fff)
  get Phys(data[n=2+2000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:3ec78000
  ph data[2]=0:3ec78000 (fff)
  get Phys(data[n=3+1000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:3ec71000
  ph data[3]=0:3ec71000 (fff)
  get Phys(data[n=4+1000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:3ec6a000
  ph data[4]=0:3ec6a000 (fff)
  get Phys(data[n=5+1000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:3ec6b000
  ph data[4]=0:3ec6a000 (1fff)
  get Phys(data[n=5+2000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:3ec6c000
  ph data[4]=0:3ec6a000 (2fff)
  get Phys(data[n=5+3000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:3ec6d000
  ph data[4]=0:3ec6a000 (3fff)
  get Phys(data[n=5+4000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:3ec76000
  ph data[5]=0:3ec76000 (fff)
  get Phys(data[n=6+1000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:3ec77000
  ph data[5]=0:3ec76000 (1fff)
  get Phys(data[n=6+2000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:3ec80000
  ph data[6]=0:3ec80000 (fff)
  get Phys(data[n=7+1000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:3ec79000
  ph data[7]=0:3ec79000 (fff)
  get Phys(data[n=8+1000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:3ec72000
  set TERM
  ph data[8]=0:3ec72000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000210, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x9, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75091e0
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000290, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000290, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:3ec73000
  ph data[0]=0:3ec73000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:3ec74000
  ph data[0]=0:3ec73000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:3ec75000
  ph data[0]=0:3ec73000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:3ec7e000
  ph data[1]=0:3ec7e000 (fff)
  get Phys(data[n=2+1000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:3ec7f000
  ph data[1]=0:3ec7e000 (1fff)
  get Phys(data[n=2+2000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:3ec88000
  ph data[2]=0:3ec88000 (fff)
  get Phys(data[n=3+1000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:3ec81000
  ph data[3]=0:3ec81000 (fff)
  get Phys(data[n=4+1000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:3ec7a000
  ph data[4]=0:3ec7a000 (fff)
  get Phys(data[n=5+1000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:3ec7b000
  ph data[4]=0:3ec7a000 (1fff)
  get Phys(data[n=5+2000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:3ec7c000
  ph data[4]=0:3ec7a000 (2fff)
  get Phys(data[n=5+3000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:3ec7d000
  ph data[4]=0:3ec7a000 (3fff)
  get Phys(data[n=5+4000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:3ec86000
  ph data[5]=0:3ec86000 (fff)
  get Phys(data[n=6+1000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:3ec87000
  ph data[5]=0:3ec86000 (1fff)
  get Phys(data[n=6+2000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:3ec90000
  ph data[6]=0:3ec90000 (fff)
  get Phys(data[n=7+1000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:3ec89000
  ph data[7]=0:3ec89000 (fff)
  get Phys(data[n=8+1000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:3ec82000
  set TERM
  ph data[8]=0:3ec82000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75091e0
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000310, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000310, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:3ec83000
  ph data[0]=0:3ec83000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:3ec84000
  ph data[0]=0:3ec83000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:3ec85000
  ph data[0]=0:3ec83000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:3ec8e000
  ph data[1]=0:3ec8e000 (fff)
  get Phys(data[n=2+1000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:3ec8f000
  ph data[1]=0:3ec8e000 (1fff)
  get Phys(data[n=2+2000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:3ec98000
  ph data[2]=0:3ec98000 (fff)
  get Phys(data[n=3+1000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:3ec91000
  ph data[3]=0:3ec91000 (fff)
  get Phys(data[n=4+1000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:3ec8a000
  ph data[4]=0:3ec8a000 (fff)
  get Phys(data[n=5+1000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:3ec8b000
  ph data[4]=0:3ec8a000 (1fff)
  get Phys(data[n=5+2000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:3ec8c000
  ph data[4]=0:3ec8a000 (2fff)
  get Phys(data[n=5+3000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:3ec8d000
  ph data[4]=0:3ec8a000 (3fff)
  get Phys(data[n=5+4000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:3ec96000
  ph data[5]=0:3ec96000 (fff)
  get Phys(data[n=6+1000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:3ec97000
  ph data[5]=0:3ec96000 (1fff)
  get Phys(data[n=6+2000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:3eca0000
  ph data[6]=0:3eca0000 (fff)
  get Phys(data[n=7+1000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:3ec99000
  ph data[7]=0:3ec99000 (fff)
  get Phys(data[n=8+1000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:3ec92000
  set TERM
  ph data[8]=0:3ec92000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75091e0
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000390, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000390, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:3ec93000
  ph data[0]=0:3ec93000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:3ec94000
  ph data[0]=0:3ec93000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:3ec95000
  ph data[0]=0:3ec93000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:3ec9e000
  ph data[1]=0:3ec9e000 (fff)
  get Phys(data[n=2+1000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:3ec9f000
  ph data[1]=0:3ec9e000 (1fff)
  get Phys(data[n=2+2000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:3ed00000
  ph data[2]=0:3ed00000 (fff)
  get Phys(data[n=3+1000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:3eca1000
  ph data[3]=0:3eca1000 (fff)
  get Phys(data[n=4+1000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:3ecf2000
  ph data[4]=0:3ecf2000 (fff)
  get Phys(data[n=5+1000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:3ecf3000
  ph data[4]=0:3ecf2000 (1fff)
  get Phys(data[n=5+2000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:3ecfc000
  ph data[5]=0:3ecfc000 (fff)
  get Phys(data[n=6+1000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:3ecfd000
  ph data[5]=0:3ecfc000 (1fff)
  get Phys(data[n=6+2000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:3ecfe000
  ph data[5]=0:3ecfc000 (2fff)
  get Phys(data[n=6+3000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:3ecff000
  ph data[5]=0:3ecfc000 (3fff)
  get Phys(data[n=6+4000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:3ed08000
  ph data[6]=0:3ed08000 (fff)
  get Phys(data[n=7+1000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:3ed01000
  ph data[7]=0:3ed01000 (fff)
  get Phys(data[n=8+1000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:3ecfa000
  set TERM
  ph data[8]=0:3ecfa000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000290, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x9, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000310, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x9, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf78019e4
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000390, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x9, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf750960c
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000210, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 39000210, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f750f000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:3e24b000
  ph data[0]=0:3e24b000 (fff)
  get Phys(data[n=1+1000]=f7510000)
AtapiVirtToPhysAddr_: f7510000 -> 00000000:3e24c000
  set TERM
  ph data[0]=0:3e24b000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000210, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x1, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7509600
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fddf50, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fddf50, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:3e24e000
  ph data[0]=0:3e24e000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:3e24f000
  ph data[0]=0:3e24e000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:3e250000
  ph data[0]=0:3e24e000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:3e259000
  ph data[1]=0:3e259000 (fff)
  get Phys(data[n=2+1000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:3e25a000
  ph data[1]=0:3e259000 (1fff)
  get Phys(data[n=2+2000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:3e253000
  ph data[2]=0:3e253000 (fff)
  get Phys(data[n=3+1000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:3e254000
  ph data[2]=0:3e253000 (1fff)
  get Phys(data[n=3+2000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:3e255000
  ph data[2]=0:3e253000 (2fff)
  get Phys(data[n=3+3000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:3e256000
  ph data[2]=0:3e253000 (3fff)
  get Phys(data[n=3+4000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:3e257000
  ph data[2]=0:3e253000 (4fff)
  get Phys(data[n=3+5000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:3e258000
  ph data[2]=0:3e253000 (5fff)
  get Phys(data[n=3+6000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:3e261000
  ph data[3]=0:3e261000 (fff)
  get Phys(data[n=4+1000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:3e262000
  ph data[3]=0:3e261000 (1fff)
  get Phys(data[n=4+2000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:3e25b000
  ph data[4]=0:3e25b000 (fff)
  get Phys(data[n=5+1000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:3e25c000
  ph data[4]=0:3e25b000 (1fff)
  get Phys(data[n=5+2000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:3e25d000
  set TERM
  ph data[4]=0:3e25b000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fddf50, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x5, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7509600
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fddfd0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fddfd0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:3e25e000
  ph data[0]=0:3e25e000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:3e25f000
  ph data[0]=0:3e25e000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:3e260000
  ph data[0]=0:3e25e000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:3e269000
  ph data[1]=0:3e269000 (fff)
  get Phys(data[n=2+1000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:3e26a000
  ph data[1]=0:3e269000 (1fff)
  get Phys(data[n=2+2000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:3e263000
  ph data[2]=0:3e263000 (fff)
  get Phys(data[n=3+1000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:3e264000
  ph data[2]=0:3e263000 (1fff)
  get Phys(data[n=3+2000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:3e265000
  ph data[2]=0:3e263000 (2fff)
  get Phys(data[n=3+3000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:3e266000
  ph data[2]=0:3e263000 (3fff)
  get Phys(data[n=3+4000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:3e267000
  ph data[2]=0:3e263000 (4fff)
  get Phys(data[n=3+5000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:3e268000
  ph data[2]=0:3e263000 (5fff)
  get Phys(data[n=3+6000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:3e271000
  ph data[3]=0:3e271000 (fff)
  get Phys(data[n=4+1000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:3e272000
  ph data[3]=0:3e271000 (1fff)
  get Phys(data[n=4+2000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:3e26b000
  ph data[4]=0:3e26b000 (fff)
  get Phys(data[n=5+1000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:3e26c000
  ph data[4]=0:3e26b000 (1fff)
  get Phys(data[n=5+2000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:3e26d000
  set TERM
  ph data[4]=0:3e26b000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7509600
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fde050, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fde050, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:3e26e000
  ph data[0]=0:3e26e000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:3e26f000
  ph data[0]=0:3e26e000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:3e270000
  ph data[0]=0:3e26e000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:3e279000
  ph data[1]=0:3e279000 (fff)
  get Phys(data[n=2+1000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:3e27a000
  ph data[1]=0:3e279000 (1fff)
  get Phys(data[n=2+2000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:3e273000
  ph data[2]=0:3e273000 (fff)
  get Phys(data[n=3+1000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:3e274000
  ph data[2]=0:3e273000 (1fff)
  get Phys(data[n=3+2000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:3e275000
  ph data[2]=0:3e273000 (2fff)
  get Phys(data[n=3+3000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:3e276000
  ph data[2]=0:3e273000 (3fff)
  get Phys(data[n=3+4000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:3e277000
  ph data[2]=0:3e273000 (4fff)
  get Phys(data[n=3+5000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:3e278000
  ph data[2]=0:3e273000 (5fff)
  get Phys(data[n=3+6000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:3e281000
  ph data[3]=0:3e281000 (fff)
  get Phys(data[n=4+1000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:3e282000
  ph data[3]=0:3e281000 (1fff)
  get Phys(data[n=4+2000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:3e27b000
  ph data[4]=0:3e27b000 (fff)
  get Phys(data[n=5+1000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:3e27c000
  ph data[4]=0:3e27b000 (1fff)
  get Phys(data[n=5+2000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:3e27d000
  set TERM
  ph data[4]=0:3e27b000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7509600
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fde0d0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fde0d0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:3e27e000
  ph data[0]=0:3e27e000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:3e27f000
  ph data[0]=0:3e27e000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:3e280000
  ph data[0]=0:3e27e000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:3e289000
  ph data[1]=0:3e289000 (fff)
  get Phys(data[n=2+1000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:3e28a000
  ph data[1]=0:3e289000 (1fff)
  get Phys(data[n=2+2000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:3e283000
  ph data[2]=0:3e283000 (fff)
  get Phys(data[n=3+1000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:3e284000
  ph data[2]=0:3e283000 (1fff)
  get Phys(data[n=3+2000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:3e285000
  ph data[2]=0:3e283000 (2fff)
  get Phys(data[n=3+3000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:3e286000
  ph data[2]=0:3e283000 (3fff)
  get Phys(data[n=3+4000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:3e287000
  ph data[2]=0:3e283000 (4fff)
  get Phys(data[n=3+5000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:3e288000
  ph data[2]=0:3e283000 (5fff)
  get Phys(data[n=3+6000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:3e291000
  ph data[3]=0:3e291000 (fff)
  get Phys(data[n=4+1000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:3e292000
  ph data[3]=0:3e291000 (1fff)
  get Phys(data[n=4+2000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:3e28b000
  ph data[4]=0:3e28b000 (fff)
  get Phys(data[n=5+1000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:3e28c000
  ph data[4]=0:3e28b000 (1fff)
  get Phys(data[n=5+2000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:3e28d000
  set TERM
  ph data[4]=0:3e28b000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fddfd0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x5, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fde050, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x5, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fde0d0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x5, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7509600
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fff8e0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fff8e0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:3d841000
  ph data[0]=0:3d841000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:3d842000
  ph data[0]=0:3d841000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:3d84b000
  ph data[1]=0:3d84b000 (fff)
  get Phys(data[n=2+1000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:3d84c000
  ph data[1]=0:3d84b000 (1fff)
  get Phys(data[n=2+2000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:3d84d000
  ph data[1]=0:3d84b000 (2fff)
  get Phys(data[n=2+3000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:3d856000
  ph data[2]=0:3d856000 (fff)
  get Phys(data[n=3+1000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:3d857000
  ph data[2]=0:3d856000 (1fff)
  get Phys(data[n=3+2000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:3d850000
  ph data[3]=0:3d850000 (fff)
  get Phys(data[n=4+1000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:3d849000
  ph data[4]=0:3d849000 (fff)
  get Phys(data[n=5+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:3d84a000
  ph data[4]=0:3d849000 (1fff)
  get Phys(data[n=5+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:3d853000
  ph data[5]=0:3d853000 (fff)
  get Phys(data[n=6+1000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:3d854000
  ph data[5]=0:3d853000 (1fff)
  get Phys(data[n=6+2000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:3d855000
  ph data[5]=0:3d853000 (2fff)
  get Phys(data[n=6+3000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:3d85e000
  ph data[6]=0:3d85e000 (fff)
  get Phys(data[n=7+1000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:3d85f000
  ph data[6]=0:3d85e000 (1fff)
  get Phys(data[n=7+2000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:3d858000
  set TERM
  ph data[7]=0:3d858000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fff8e0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x8, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7509600
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fff960, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fff960, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:3d851000
  ph data[0]=0:3d851000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:3d852000
  ph data[0]=0:3d851000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:3d85b000
  ph data[1]=0:3d85b000 (fff)
  get Phys(data[n=2+1000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:3d85c000
  ph data[1]=0:3d85b000 (1fff)
  get Phys(data[n=2+2000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:3d85d000
  ph data[1]=0:3d85b000 (2fff)
  get Phys(data[n=2+3000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:3d866000
  ph data[2]=0:3d866000 (fff)
  get Phys(data[n=3+1000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:3d867000
  ph data[2]=0:3d866000 (1fff)
  get Phys(data[n=3+2000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:3d860000
  ph data[3]=0:3d860000 (fff)
  get Phys(data[n=4+1000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:3d859000
  ph data[4]=0:3d859000 (fff)
  get Phys(data[n=5+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:3d85a000
  ph data[4]=0:3d859000 (1fff)
  get Phys(data[n=5+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:3d863000
  ph data[5]=0:3d863000 (fff)
  get Phys(data[n=6+1000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:3d864000
  ph data[5]=0:3d863000 (1fff)
  get Phys(data[n=6+2000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:3d865000
  ph data[5]=0:3d863000 (2fff)
  get Phys(data[n=6+3000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:3d86e000
  ph data[6]=0:3d86e000 (fff)
  get Phys(data[n=7+1000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:3d86f000
  ph data[6]=0:3d86e000 (1fff)
  get Phys(data[n=7+2000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:3d868000
  set TERM
  ph data[7]=0:3d868000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7509600
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fff9e0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fff9e0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:3d861000
  ph data[0]=0:3d861000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:3d862000
  ph data[0]=0:3d861000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:3d86b000
  ph data[1]=0:3d86b000 (fff)
  get Phys(data[n=2+1000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:3d86c000
  ph data[1]=0:3d86b000 (1fff)
  get Phys(data[n=2+2000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:3d86d000
  ph data[1]=0:3d86b000 (2fff)
  get Phys(data[n=2+3000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:3d876000
  ph data[2]=0:3d876000 (fff)
  get Phys(data[n=3+1000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:3d877000
  ph data[2]=0:3d876000 (1fff)
  get Phys(data[n=3+2000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:3d870000
  ph data[3]=0:3d870000 (fff)
  get Phys(data[n=4+1000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:3d869000
  ph data[4]=0:3d869000 (fff)
  get Phys(data[n=5+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:3d86a000
  ph data[4]=0:3d869000 (1fff)
  get Phys(data[n=5+2000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:3d873000
  ph data[5]=0:3d873000 (fff)
  get Phys(data[n=6+1000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:3d874000
  ph data[5]=0:3d873000 (1fff)
  get Phys(data[n=6+2000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:3d875000
  ph data[5]=0:3d873000 (2fff)
  get Phys(data[n=6+3000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:3d87e000
  ph data[6]=0:3d87e000 (fff)
  get Phys(data[n=7+1000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:3d87f000
  ph data[6]=0:3d87e000 (1fff)
  get Phys(data[n=7+2000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:3d878000
  set TERM
  ph data[7]=0:3d878000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7509600
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fffa60, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fffa60, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:3d871000
  ph data[0]=0:3d871000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:3d872000
  ph data[0]=0:3d871000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:3d87b000
  ph data[1]=0:3d87b000 (fff)
  get Phys(data[n=2+1000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:3d87c000
  ph data[1]=0:3d87b000 (1fff)
  get Phys(data[n=2+2000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:3d87d000
  ph data[1]=0:3d87b000 (2fff)
  get Phys(data[n=2+3000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:3d886000
  ph data[2]=0:3d886000 (fff)
  get Phys(data[n=3+1000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:3d887000
  ph data[2]=0:3d886000 (1fff)
  get Phys(data[n=3+2000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:3d880000
  ph data[3]=0:3d880000 (fff)
  get Phys(data[n=4+1000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:3d879000
  ph data[4]=0:3d879000 (fff)
  get Phys(data[n=5+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:3d87a000
  ph data[4]=0:3d879000 (1fff)
  get Phys(data[n=5+2000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:3d883000
  ph data[5]=0:3d883000 (fff)
  get Phys(data[n=6+1000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:3d884000
  ph data[5]=0:3d883000 (1fff)
  get Phys(data[n=6+2000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:3d885000
  ph data[5]=0:3d883000 (2fff)
  get Phys(data[n=6+3000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:3d88e000
  ph data[6]=0:3d88e000 (fff)
  get Phys(data[n=7+1000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:3d88f000
  ph data[6]=0:3d88e000 (1fff)
  get Phys(data[n=7+2000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:3d888000
  set TERM
  ph data[7]=0:3d888000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fff960, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x8, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fff9e0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x8, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fffa60, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x8, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff1e0
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fdf730, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fdf730, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f74d6000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f74d6000)
AtapiVirtToPhysAddr_: f74d6000 -> 00000000:3cadc000
  ph data[0]=0:3cadc000 (fff)
  get Phys(data[n=1+1000]=f74d7000)
AtapiVirtToPhysAddr_: f74d7000 -> 00000000:3cae5000
  ph data[1]=0:3cae5000 (fff)
  get Phys(data[n=2+1000]=f74d8000)
AtapiVirtToPhysAddr_: f74d8000 -> 00000000:3cade000
  ph data[2]=0:3cade000 (fff)
  get Phys(data[n=3+1000]=f74d9000)
AtapiVirtToPhysAddr_: f74d9000 -> 00000000:3cadf000
  ph data[2]=0:3cade000 (1fff)
  get Phys(data[n=3+2000]=f74da000)
AtapiVirtToPhysAddr_: f74da000 -> 00000000:3cae0000
  ph data[2]=0:3cade000 (2fff)
  get Phys(data[n=3+3000]=f74db000)
AtapiVirtToPhysAddr_: f74db000 -> 00000000:3cae9000
  ph data[3]=0:3cae9000 (fff)
  get Phys(data[n=4+1000]=f74dc000)
AtapiVirtToPhysAddr_: f74dc000 -> 00000000:3cae2000
  ph data[4]=0:3cae2000 (fff)
  get Phys(data[n=5+1000]=f74dd000)
AtapiVirtToPhysAddr_: f74dd000 -> 00000000:3cae3000
  ph data[4]=0:3cae2000 (1fff)
  get Phys(data[n=5+2000]=f74de000)
AtapiVirtToPhysAddr_: f74de000 -> 00000000:3cae4000
  ph data[4]=0:3cae2000 (2fff)
  get Phys(data[n=5+3000]=f74df000)
AtapiVirtToPhysAddr_: f74df000 -> 00000000:3caed000
  ph data[5]=0:3caed000 (fff)
  get Phys(data[n=6+1000]=f74e0000)
AtapiVirtToPhysAddr_: f74e0000 -> 00000000:3cae6000
  ph data[6]=0:3cae6000 (fff)
  get Phys(data[n=7+1000]=f74e1000)
AtapiVirtToPhysAddr_: f74e1000 -> 00000000:3cae7000
  ph data[6]=0:3cae6000 (1fff)
  get Phys(data[n=7+2000]=f74e2000)
AtapiVirtToPhysAddr_: f74e2000 -> 00000000:3cae8000
  ph data[6]=0:3cae6000 (2fff)
  get Phys(data[n=7+3000]=f74e3000)
AtapiVirtToPhysAddr_: f74e3000 -> 00000000:3caf1000
  ph data[7]=0:3caf1000 (fff)
  get Phys(data[n=8+1000]=f74e4000)
AtapiVirtToPhysAddr_: f74e4000 -> 00000000:3caea000
  ph data[8]=0:3caea000 (fff)
  get Phys(data[n=9+1000]=f74e5000)
AtapiVirtToPhysAddr_: f74e5000 -> 00000000:3caeb000
  set TERM
  ph data[8]=0:3caea000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fdf730, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x9, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff1e0
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fdf7b0, OrigWordsRequested 0x4500, DevSize 0x45
IdeReadWrite (REQ): Starting sector is 38fdf7b0, Number of WORDS 0x4500, DevSize 0x45
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f74e6000, count 8a00, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f74e6000)
AtapiVirtToPhysAddr_: f74e6000 -> 00000000:3caec000
  ph data[0]=0:3caec000 (fff)
  get Phys(data[n=1+1000]=f74e7000)
AtapiVirtToPhysAddr_: f74e7000 -> 00000000:3caf5000
  ph data[1]=0:3caf5000 (fff)
  get Phys(data[n=2+1000]=f74e8000)
AtapiVirtToPhysAddr_: f74e8000 -> 00000000:3caee000
  ph data[2]=0:3caee000 (fff)
  get Phys(data[n=3+1000]=f74e9000)
AtapiVirtToPhysAddr_: f74e9000 -> 00000000:3caef000
  ph data[2]=0:3caee000 (1fff)
  get Phys(data[n=3+2000]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:3caf0000
  ph data[2]=0:3caee000 (2fff)
  get Phys(data[n=3+3000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:3caf9000
  ph data[3]=0:3caf9000 (fff)
  get Phys(data[n=4+1000]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:3caf2000
  ph data[4]=0:3caf2000 (fff)
  get Phys(data[n=5+1000]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:3caf3000
  ph data[4]=0:3caf2000 (1fff)
  get Phys(data[n=5+2000]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:3caf4000
  set TERM
  ph data[4]=0:3caf2000 (29ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fdf7b0, Count 0x45(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x5, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 4500, WordsLeft 4500
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 8a00, full size 8a00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff60c
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fdf730, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fdf730, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f750f000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:3c4dc000
  ph data[0]=0:3c4dc000 (fff)
  get Phys(data[n=1+1000]=f7510000)
AtapiVirtToPhysAddr_: f7510000 -> 00000000:3c4dd000
  set TERM
  ph data[0]=0:3c4dc000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fdf730, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(dll/win32/kernel32/client/loader.c:384) LoadLibraryExW(\??\C:\ReactOS\system32\csrss.exe) failing with status c000000f
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff600
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000410, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000410, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7055000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:3c524000
  ph data[0]=0:3c524000 (fff)
  get Phys(data[n=1+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:3c525000
  ph data[0]=0:3c524000 (1fff)
  get Phys(data[n=1+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:3c526000
  ph data[0]=0:3c524000 (2fff)
  get Phys(data[n=1+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:3c51f000
  ph data[1]=0:3c51f000 (fff)
  get Phys(data[n=2+1000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:3c520000
  ph data[1]=0:3c51f000 (1fff)
  get Phys(data[n=2+2000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:3c529000
  ph data[2]=0:3c529000 (fff)
  get Phys(data[n=3+1000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:3c52a000
  ph data[2]=0:3c529000 (1fff)
  get Phys(data[n=3+2000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:3c52b000
  ph data[2]=0:3c529000 (2fff)
  get Phys(data[n=3+3000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:3c52c000
  ph data[2]=0:3c529000 (3fff)
  get Phys(data[n=3+4000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:3c52d000
  ph data[2]=0:3c529000 (4fff)
  get Phys(data[n=3+5000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:3c52e000
  ph data[2]=0:3c529000 (5fff)
  get Phys(data[n=3+6000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:3c527000
  ph data[3]=0:3c527000 (fff)
  get Phys(data[n=4+1000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:3c528000
  ph data[3]=0:3c527000 (1fff)
  get Phys(data[n=4+2000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:3c531000
  ph data[4]=0:3c531000 (fff)
  get Phys(data[n=5+1000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:3c532000
  ph data[4]=0:3c531000 (1fff)
  get Phys(data[n=5+2000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:3c533000
  set TERM
  ph data[4]=0:3c531000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000410, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x5, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff600
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000490, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000490, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:3c534000
  ph data[0]=0:3c534000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:3c535000
  ph data[0]=0:3c534000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:3c536000
  ph data[0]=0:3c534000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:3c52f000
  ph data[1]=0:3c52f000 (fff)
  get Phys(data[n=2+1000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:3c530000
  ph data[1]=0:3c52f000 (1fff)
  get Phys(data[n=2+2000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:3c539000
  ph data[2]=0:3c539000 (fff)
  get Phys(data[n=3+1000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:3c53a000
  ph data[2]=0:3c539000 (1fff)
  get Phys(data[n=3+2000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:3c53b000
  ph data[2]=0:3c539000 (2fff)
  get Phys(data[n=3+3000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:3c53c000
  ph data[2]=0:3c539000 (3fff)
  get Phys(data[n=3+4000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:3c53d000
  ph data[2]=0:3c539000 (4fff)
  get Phys(data[n=3+5000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:3c53e000
  ph data[2]=0:3c539000 (5fff)
  get Phys(data[n=3+6000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:3c537000
  ph data[3]=0:3c537000 (fff)
  get Phys(data[n=4+1000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:3c538000
  ph data[3]=0:3c537000 (1fff)
  get Phys(data[n=4+2000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:3c541000
  ph data[4]=0:3c541000 (fff)
  get Phys(data[n=5+1000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:3c542000
  ph data[4]=0:3c541000 (1fff)
  get Phys(data[n=5+2000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:3c543000
  set TERM
  ph data[4]=0:3c541000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff44c
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000490, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x5, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff600
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000510, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000510, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:3c544000
  ph data[0]=0:3c544000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:3c545000
  ph data[0]=0:3c544000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:3c546000
  ph data[0]=0:3c544000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:3c53f000
  ph data[1]=0:3c53f000 (fff)
  get Phys(data[n=2+1000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:3c540000
  ph data[1]=0:3c53f000 (1fff)
  get Phys(data[n=2+2000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:3c549000
  ph data[2]=0:3c549000 (fff)
  get Phys(data[n=3+1000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:3c54a000
  ph data[2]=0:3c549000 (1fff)
  get Phys(data[n=3+2000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:3c54b000
  ph data[2]=0:3c549000 (2fff)
  get Phys(data[n=3+3000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:3c54c000
  ph data[2]=0:3c549000 (3fff)
  get Phys(data[n=3+4000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:3c54d000
  ph data[2]=0:3c549000 (4fff)
  get Phys(data[n=3+5000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:3c54e000
  ph data[2]=0:3c549000 (5fff)
  get Phys(data[n=3+6000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:3c547000
  ph data[3]=0:3c547000 (fff)
  get Phys(data[n=4+1000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:3c548000
  ph data[3]=0:3c547000 (1fff)
  get Phys(data[n=4+2000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:3c551000
  ph data[4]=0:3c551000 (fff)
  get Phys(data[n=5+1000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:3c552000
  ph data[4]=0:3c551000 (1fff)
  get Phys(data[n=5+2000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:3c553000
  set TERM
  ph data[4]=0:3c551000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff600
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39000590, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39000590, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7085000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:3c554000
  ph data[0]=0:3c554000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:3c555000
  ph data[0]=0:3c554000 (1fff)
  get Phys(data[n=1+2000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:3c556000
  ph data[0]=0:3c554000 (2fff)
  get Phys(data[n=1+3000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:3c54f000
  ph data[1]=0:3c54f000 (fff)
  get Phys(data[n=2+1000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:3c550000
  ph data[1]=0:3c54f000 (1fff)
  get Phys(data[n=2+2000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:3c559000
  ph data[2]=0:3c559000 (fff)
  get Phys(data[n=3+1000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:3c55a000
  ph data[2]=0:3c559000 (1fff)
  get Phys(data[n=3+2000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:3c55b000
  ph data[2]=0:3c559000 (2fff)
  get Phys(data[n=3+3000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:3c55c000
  ph data[2]=0:3c559000 (3fff)
  get Phys(data[n=3+4000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:3c55d000
  ph data[2]=0:3c559000 (4fff)
  get Phys(data[n=3+5000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:3c55e000
  ph data[2]=0:3c559000 (5fff)
  get Phys(data[n=3+6000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:3c557000
  ph data[3]=0:3c557000 (fff)
  get Phys(data[n=4+1000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:3c558000
  ph data[3]=0:3c557000 (1fff)
  get Phys(data[n=4+2000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:3c561000
  ph data[4]=0:3c561000 (fff)
  get Phys(data[n=5+1000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:3c562000
  ph data[4]=0:3c561000 (1fff)
  get Phys(data[n=5+2000]=f7094000)
AtapiVirtToPhysAddr_: f7094000 -> 00000000:3c563000
  set TERM
  ph data[4]=0:3c561000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000510, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x5, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39000590, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x5, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74fe6e0
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffe330, OrigWordsRequested 0x2600, DevSize 0x26
IdeReadWrite (REQ): Starting sector is 38ffe330, Number of WORDS 0x2600, DevSize 0x26
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f74ea000, count 4c00, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f74ea000)
AtapiVirtToPhysAddr_: f74ea000 -> 00000000:3bd93000
  ph data[0]=0:3bd93000 (fff)
  get Phys(data[n=1+1000]=f74eb000)
AtapiVirtToPhysAddr_: f74eb000 -> 00000000:3bd9c000
  ph data[1]=0:3bd9c000 (fff)
  get Phys(data[n=2+1000]=f74ec000)
AtapiVirtToPhysAddr_: f74ec000 -> 00000000:3bd95000
  ph data[2]=0:3bd95000 (fff)
  get Phys(data[n=3+1000]=f74ed000)
AtapiVirtToPhysAddr_: f74ed000 -> 00000000:3bd96000
  ph data[2]=0:3bd95000 (1fff)
  get Phys(data[n=3+2000]=f74ee000)
AtapiVirtToPhysAddr_: f74ee000 -> 00000000:3bd97000
  set TERM
  ph data[2]=0:3bd95000 (2bff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffe330, Count 0x26(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x3, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 2600, WordsLeft 2600
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 4c00, full size 4c00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74feabc
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffe330, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38ffe330, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f750f000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:3b2f3000
  ph data[0]=0:3b2f3000 (fff)
  get Phys(data[n=1+1000]=f7510000)
AtapiVirtToPhysAddr_: f7510000 -> 00000000:3b2f4000
  set TERM
  ph data[0]=0:3b2f3000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffe330, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\framebuf.dll at F74E3000 with d pages
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7665468
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3960a860, OrigWordsRequested 0xc00, DevSize 0xc
IdeReadWrite (REQ): Starting sector is 3960a860, Number of WORDS 0xc00, DevSize 0xc
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f750f000, count 1800, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:3b2ff000
  ph data[0]=0:3b2ff000 (fff)
  get Phys(data[n=1+1000]=f7510000)
AtapiVirtToPhysAddr_: f7510000 -> 00000000:3b2f8000
  set TERM
  ph data[1]=0:3b2f8000 (7ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3960a860, Count 0xc(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x2, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
(win32ss/user/ntuser/winsta.c:241) err: Invalid window station handle
(win32ss/user/ntuser/clipboard.c:31) err: Cannot open winsta
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7520c68
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3904e750, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 3904e750, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f74fe000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f74fe000)
AtapiVirtToPhysAddr_: f74fe000 -> 00000000:3b33f000
  ph data[0]=0:3b33f000 (fff)
  get Phys(data[n=1+1000]=f74ff000)
AtapiVirtToPhysAddr_: f74ff000 -> 00000000:3b338000
  set TERM
  ph data[1]=0:3b338000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered c00, WordsLeft c00
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 1800, full size 1800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3904e750, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x2, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75211e0
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc2630, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fc2630, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f705b000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:398c7000
  ph data[0]=0:398c7000 (fff)
  get Phys(data[n=1+1000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:398c8000
  ph data[0]=0:398c7000 (1fff)
  get Phys(data[n=1+2000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:398c9000
  ph data[0]=0:398c7000 (2fff)
  get Phys(data[n=1+3000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:398ca000
  ph data[0]=0:398c7000 (3fff)
  get Phys(data[n=1+4000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:398c3000
  ph data[1]=0:398c3000 (fff)
  get Phys(data[n=2+1000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:398c4000
  ph data[1]=0:398c3000 (1fff)
  get Phys(data[n=2+2000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:398c5000
  ph data[1]=0:398c3000 (2fff)
  get Phys(data[n=2+3000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:398c6000
  ph data[1]=0:398c3000 (3fff)
  get Phys(data[n=2+4000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:398cf000
  ph data[2]=0:398cf000 (fff)
  get Phys(data[n=3+1000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:398d0000
  ph data[2]=0:398cf000 (1fff)
  get Phys(data[n=3+2000]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:398d1000
  ph data[2]=0:398cf000 (2fff)
  get Phys(data[n=3+3000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:398d2000
  ph data[2]=0:398cf000 (3fff)
  get Phys(data[n=3+4000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:398cb000
  ph data[3]=0:398cb000 (fff)
  get Phys(data[n=4+1000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:398cc000
  ph data[3]=0:398cb000 (1fff)
  get Phys(data[n=4+2000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:398cd000
  ph data[3]=0:398cb000 (2fff)
  get Phys(data[n=4+3000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:398ce000
  set TERM
  ph data[3]=0:398cb000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc2630, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75211e0
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc26b0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fc26b0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f706b000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:398d7000
  ph data[0]=0:398d7000 (fff)
  get Phys(data[n=1+1000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:398d8000
  ph data[0]=0:398d7000 (1fff)
  get Phys(data[n=1+2000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:398d9000
  ph data[0]=0:398d7000 (2fff)
  get Phys(data[n=1+3000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:398da000
  ph data[0]=0:398d7000 (3fff)
  get Phys(data[n=1+4000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:398d3000
  ph data[1]=0:398d3000 (fff)
  get Phys(data[n=2+1000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:398d4000
  ph data[1]=0:398d3000 (1fff)
  get Phys(data[n=2+2000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:398d5000
  ph data[1]=0:398d3000 (2fff)
  get Phys(data[n=2+3000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:398d6000
  ph data[1]=0:398d3000 (3fff)
  get Phys(data[n=2+4000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:398df000
  ph data[2]=0:398df000 (fff)
  get Phys(data[n=3+1000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:398e0000
  ph data[2]=0:398df000 (1fff)
  get Phys(data[n=3+2000]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:398e1000
  ph data[2]=0:398df000 (2fff)
  get Phys(data[n=3+3000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:398e2000
  ph data[2]=0:398df000 (3fff)
  get Phys(data[n=3+4000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:398db000
  ph data[3]=0:398db000 (fff)
  get Phys(data[n=4+1000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:398dc000
  ph data[3]=0:398db000 (1fff)
  get Phys(data[n=4+2000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:398dd000
  ph data[3]=0:398db000 (2fff)
  get Phys(data[n=4+3000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:398de000
  set TERM
  ph data[3]=0:398db000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75211e0
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc2730, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fc2730, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f707b000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:398e7000
  ph data[0]=0:398e7000 (fff)
  get Phys(data[n=1+1000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:398e8000
  ph data[0]=0:398e7000 (1fff)
  get Phys(data[n=1+2000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:398e9000
  ph data[0]=0:398e7000 (2fff)
  get Phys(data[n=1+3000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:398ea000
  ph data[0]=0:398e7000 (3fff)
  get Phys(data[n=1+4000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:398e3000
  ph data[1]=0:398e3000 (fff)
  get Phys(data[n=2+1000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:398e4000
  ph data[1]=0:398e3000 (1fff)
  get Phys(data[n=2+2000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:398e5000
  ph data[1]=0:398e3000 (2fff)
  get Phys(data[n=2+3000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:398e6000
  ph data[1]=0:398e3000 (3fff)
  get Phys(data[n=2+4000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:398ef000
  ph data[2]=0:398ef000 (fff)
  get Phys(data[n=3+1000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:398f0000
  ph data[2]=0:398ef000 (1fff)
  get Phys(data[n=3+2000]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:398f1000
  ph data[2]=0:398ef000 (2fff)
  get Phys(data[n=3+3000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:398f2000
  ph data[2]=0:398ef000 (3fff)
  get Phys(data[n=3+4000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:398eb000
  ph data[3]=0:398eb000 (fff)
  get Phys(data[n=4+1000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:398ec000
  ph data[3]=0:398eb000 (1fff)
  get Phys(data[n=4+2000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:398ed000
  ph data[3]=0:398eb000 (2fff)
  get Phys(data[n=4+3000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:398ee000
  set TERM
  ph data[3]=0:398eb000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75211e0
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc27b0, OrigWordsRequested 0x4300, DevSize 0x43
IdeReadWrite (REQ): Starting sector is 38fc27b0, Number of WORDS 0x4300, DevSize 0x43
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f708b000, count 8600, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:398f7000
  ph data[0]=0:398f7000 (fff)
  get Phys(data[n=1+1000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:398f8000
  ph data[0]=0:398f7000 (1fff)
  get Phys(data[n=1+2000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:398f9000
  ph data[0]=0:398f7000 (2fff)
  get Phys(data[n=1+3000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:398fa000
  ph data[0]=0:398f7000 (3fff)
  get Phys(data[n=1+4000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:398f3000
  ph data[1]=0:398f3000 (fff)
  get Phys(data[n=2+1000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:398f4000
  ph data[1]=0:398f3000 (1fff)
  get Phys(data[n=2+2000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:398f5000
  ph data[1]=0:398f3000 (2fff)
  get Phys(data[n=2+3000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:398f6000
  ph data[1]=0:398f3000 (3fff)
  get Phys(data[n=2+4000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:398ff000
  set TERM
  ph data[2]=0:398ff000 (5ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc26b0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc2730, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc27b0, Count 0x43(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x3, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 4300, WordsLeft 4300
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 8600, full size 8600
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf752160c
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc2630, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fc2630, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f750f000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:38cc7000
  ph data[0]=0:38cc7000 (fff)
  get Phys(data[n=1+1000]=f7510000)
AtapiVirtToPhysAddr_: f7510000 -> 00000000:38cc0000
  set TERM
  ph data[1]=0:38cc0000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc2630, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x2, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7514d00
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:38cd2000
  ph data[0]=0:38cd2000 (fff)
  get Phys(data[n=1+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:38cd3000
  set TERM
  ph data[0]=0:38cd2000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7514d00
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:38972000
  ph data[0]=0:38972000 (fff)
  get Phys(data[n=1+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:38973000
  set TERM
  ph data[0]=0:38972000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7515230
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39058740, OrigWordsRequested 0x200, DevSize 0x2
IdeReadWrite (REQ): Starting sector is 39058740, Number of WORDS 0x200, DevSize 0x2
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f750e000, count 400, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:389b2000
  set TERM
  ph data[0]=0:389b2000 (3ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39058740, Count 0x2(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 200, WordsLeft 200
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 400, full size 400
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7514d00
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:3895b000
  ph data[0]=0:3895b000 (fff)
  get Phys(data[n=1+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:3895c000
  set TERM
  ph data[0]=0:3895b000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7515174
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:38953000
  ph data[0]=0:38953000 (fff)
  get Phys(data[n=1+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:3894c000
  set TERM
  ph data[1]=0:3894c000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x2, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb
(drivers/usb/usbehci/hardware.cpp:1321) CStatus b
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7514d00
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:38943000
  ph data[0]=0:38943000 (fff)
  get Phys(data[n=1+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:38944000
  set TERM
  ph data[0]=0:38943000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7514d00
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:38933000
  ph data[0]=0:38933000 (fff)
  get Phys(data[n=1+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:38934000
  set TERM
  ph data[0]=0:38933000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7515230
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39058700, OrigWordsRequested 0x400, DevSize 0x4
IdeReadWrite (REQ): Starting sector is 39058700, Number of WORDS 0x400, DevSize 0x4
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f750e000, count 800, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:38abb000
  set TERM
  ph data[0]=0:38abb000 (7ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39058700, Count 0x4(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 400, WordsLeft 400
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 800, full size 800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7514d00
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:3891b000
  ph data[0]=0:3891b000 (fff)
  get Phys(data[n=1+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:38924000
  set TERM
  ph data[1]=0:38924000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x2, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7515174
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:3890b000
  ph data[0]=0:3890b000 (fff)
  get Phys(data[n=1+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:3890c000
  set TERM
  ph data[0]=0:3890b000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7514d00
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:38b53000
  ph data[0]=0:38b53000 (fff)
  get Phys(data[n=1+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:38b54000
  set TERM
  ph data[0]=0:38b53000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7514d00
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:388fb000
  ph data[0]=0:388fb000 (fff)
  get Phys(data[n=1+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:388fc000
  set TERM
  ph data[0]=0:388fb000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7515230
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39058720, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 39058720, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f750e000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:388f3000
  set TERM
  ph data[0]=0:388f3000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39058720, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7514d00
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:38c2a000
  ph data[0]=0:38c2a000 (fff)
  get Phys(data[n=1+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:38c2b000
  set TERM
  ph data[0]=0:38c2a000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7515174
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:388da000
  ph data[0]=0:388da000 (fff)
  get Phys(data[n=1+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:388db000
  set TERM
  ph data[0]=0:388da000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7514d00
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:388d2000
  ph data[0]=0:388d2000 (fff)
  get Phys(data[n=1+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:388d3000
  set TERM
  ph data[0]=0:388d2000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7514d00
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:388ba000
  ph data[0]=0:388ba000 (fff)
  get Phys(data[n=1+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:388bb000
  set TERM
  ph data[0]=0:388ba000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7515230
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39058710, OrigWordsRequested 0x400, DevSize 0x4
IdeReadWrite (REQ): Starting sector is 39058710, Number of WORDS 0x400, DevSize 0x4
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f750e000, count 800, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:388b2000
  set TERM
  ph data[0]=0:388b2000 (7ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39058710, Count 0x4(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 400, WordsLeft 400
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 800, full size 800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6471638
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75151e0
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ff4e00, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ff4e00, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7065000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:3889e000
  ph data[0]=0:3889e000 (fff)
  get Phys(data[n=1+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:3889f000
  ph data[0]=0:3889e000 (1fff)
  get Phys(data[n=1+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:388a0000
  ph data[0]=0:3889e000 (2fff)
  get Phys(data[n=1+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:388a1000
  ph data[0]=0:3889e000 (3fff)
  get Phys(data[n=1+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:388aa000
  ph data[1]=0:388aa000 (fff)
  get Phys(data[n=2+1000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:388ab000
  ph data[1]=0:388aa000 (1fff)
  get Phys(data[n=2+2000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:388ac000
  ph data[1]=0:388aa000 (2fff)
  get Phys(data[n=2+3000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:38d7d000
  ph data[2]=0:38d7d000 (fff)
  get Phys(data[n=3+1000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:388a6000
  ph data[3]=0:388a6000 (fff)
  get Phys(data[n=4+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:388a7000
  ph data[3]=0:388a6000 (1fff)
  get Phys(data[n=4+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:388a8000
  ph data[3]=0:388a6000 (2fff)
  get Phys(data[n=4+3000]=f7070000)
AtapiVirtToPhysAddr_: f7070000 -> 00000000:388a9000
  ph data[3]=0:388a6000 (3fff)
  get Phys(data[n=4+4000]=f7071000)
AtapiVirtToPhysAddr_: f7071000 -> 00000000:38d82000
  ph data[4]=0:38d82000 (fff)
  get Phys(data[n=5+1000]=f7072000)
AtapiVirtToPhysAddr_: f7072000 -> 00000000:38d83000
  ph data[4]=0:38d82000 (1fff)
  get Phys(data[n=5+2000]=f7073000)
AtapiVirtToPhysAddr_: f7073000 -> 00000000:38d84000
  ph data[4]=0:38d82000 (2fff)
  get Phys(data[n=5+3000]=f7074000)
AtapiVirtToPhysAddr_: f7074000 -> 00000000:38d85000
  set TERM
  ph data[4]=0:38d82000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ff4e00, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x5, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75151e0
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ff4e80, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ff4e80, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7075000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7075000)
AtapiVirtToPhysAddr_: f7075000 -> 00000000:388ae000
  ph data[0]=0:388ae000 (fff)
  get Phys(data[n=1+1000]=f7076000)
AtapiVirtToPhysAddr_: f7076000 -> 00000000:388af000
  ph data[0]=0:388ae000 (1fff)
  get Phys(data[n=1+2000]=f7077000)
AtapiVirtToPhysAddr_: f7077000 -> 00000000:388b0000
  ph data[0]=0:388ae000 (2fff)
  get Phys(data[n=1+3000]=f7078000)
AtapiVirtToPhysAddr_: f7078000 -> 00000000:388b1000
  ph data[0]=0:388ae000 (3fff)
  get Phys(data[n=1+4000]=f7079000)
AtapiVirtToPhysAddr_: f7079000 -> 00000000:38d8a000
  ph data[1]=0:38d8a000 (fff)
  get Phys(data[n=2+1000]=f707a000)
AtapiVirtToPhysAddr_: f707a000 -> 00000000:38d8b000
  ph data[1]=0:38d8a000 (1fff)
  get Phys(data[n=2+2000]=f707b000)
AtapiVirtToPhysAddr_: f707b000 -> 00000000:38d8c000
  ph data[1]=0:38d8a000 (2fff)
  get Phys(data[n=2+3000]=f707c000)
AtapiVirtToPhysAddr_: f707c000 -> 00000000:38d8d000
  ph data[1]=0:38d8a000 (3fff)
  get Phys(data[n=2+4000]=f707d000)
AtapiVirtToPhysAddr_: f707d000 -> 00000000:38d7e000
  ph data[2]=0:38d7e000 (fff)
  get Phys(data[n=3+1000]=f707e000)
AtapiVirtToPhysAddr_: f707e000 -> 00000000:38d8f000
  ph data[3]=0:38d8f000 (fff)
  get Phys(data[n=4+1000]=f707f000)
AtapiVirtToPhysAddr_: f707f000 -> 00000000:38d90000
  ph data[3]=0:38d8f000 (1fff)
  get Phys(data[n=4+2000]=f7080000)
AtapiVirtToPhysAddr_: f7080000 -> 00000000:38d91000
  ph data[3]=0:38d8f000 (2fff)
  get Phys(data[n=4+3000]=f7081000)
AtapiVirtToPhysAddr_: f7081000 -> 00000000:38d92000
  ph data[3]=0:38d8f000 (3fff)
  get Phys(data[n=4+4000]=f7082000)
AtapiVirtToPhysAddr_: f7082000 -> 00000000:38d93000
  ph data[3]=0:38d8f000 (4fff)
  get Phys(data[n=4+5000]=f7083000)
AtapiVirtToPhysAddr_: f7083000 -> 00000000:38d94000
  ph data[3]=0:38d8f000 (5fff)
  get Phys(data[n=4+6000]=f7084000)
AtapiVirtToPhysAddr_: f7084000 -> 00000000:38d95000
  set TERM
  ph data[3]=0:38d8f000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75151e0
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ff4f00, OrigWordsRequested 0x7500, DevSize 0x75
IdeReadWrite (REQ): Starting sector is 38ff4f00, Number of WORDS 0x7500, DevSize 0x75
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7085000, count ea00, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7085000)
AtapiVirtToPhysAddr_: f7085000 -> 00000000:38d86000
  ph data[0]=0:38d86000 (fff)
  get Phys(data[n=1+1000]=f7086000)
AtapiVirtToPhysAddr_: f7086000 -> 00000000:38d97000
  ph data[1]=0:38d97000 (fff)
  get Phys(data[n=2+1000]=f7087000)
AtapiVirtToPhysAddr_: f7087000 -> 00000000:38d98000
  ph data[1]=0:38d97000 (1fff)
  get Phys(data[n=2+2000]=f7088000)
AtapiVirtToPhysAddr_: f7088000 -> 00000000:38d99000
  ph data[1]=0:38d97000 (2fff)
  get Phys(data[n=2+3000]=f7089000)
AtapiVirtToPhysAddr_: f7089000 -> 00000000:38d9a000
  ph data[1]=0:38d97000 (3fff)
  get Phys(data[n=2+4000]=f708a000)
AtapiVirtToPhysAddr_: f708a000 -> 00000000:38d9b000
  ph data[1]=0:38d97000 (4fff)
  get Phys(data[n=2+5000]=f708b000)
AtapiVirtToPhysAddr_: f708b000 -> 00000000:38d9c000
  ph data[1]=0:38d97000 (5fff)
  get Phys(data[n=2+6000]=f708c000)
AtapiVirtToPhysAddr_: f708c000 -> 00000000:38d9d000
  ph data[1]=0:38d97000 (6fff)
  get Phys(data[n=2+7000]=f708d000)
AtapiVirtToPhysAddr_: f708d000 -> 00000000:38d8e000
  ph data[2]=0:38d8e000 (fff)
  get Phys(data[n=3+1000]=f708e000)
AtapiVirtToPhysAddr_: f708e000 -> 00000000:38d9f000
  ph data[3]=0:38d9f000 (fff)
  get Phys(data[n=4+1000]=f708f000)
AtapiVirtToPhysAddr_: f708f000 -> 00000000:38da0000
  ph data[3]=0:38d9f000 (1fff)
  get Phys(data[n=4+2000]=f7090000)
AtapiVirtToPhysAddr_: f7090000 -> 00000000:38da1000
  ph data[3]=0:38d9f000 (2fff)
  get Phys(data[n=4+3000]=f7091000)
AtapiVirtToPhysAddr_: f7091000 -> 00000000:38da2000
  ph data[3]=0:38d9f000 (3fff)
  get Phys(data[n=4+4000]=f7092000)
AtapiVirtToPhysAddr_: f7092000 -> 00000000:38da3000
  ph data[3]=0:38d9f000 (4fff)
  get Phys(data[n=4+5000]=f7093000)
AtapiVirtToPhysAddr_: f7093000 -> 00000000:38da4000
  set TERM
  ph data[3]=0:38d9f000 (59ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ff4e80, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf78019c4
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ff4f00, Count 0x75(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 7500, WordsLeft 7500
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered ea00, full size ea00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf751560c
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ff4e00, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38ff4e00, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:37796000
  ph data[0]=0:37796000 (fff)
  get Phys(data[n=1+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:37797000
  set TERM
  ph data[0]=0:37796000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ff4e00, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(dll/win32/kernel32/client/loader.c:384) LoadLibraryExW(\??\C:\ReactOS\System32\winlogon.exe) failing with status c000000f
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74fec68
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3905c540, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 3905c540, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:377f1000
  ph data[0]=0:377f1000 (fff)
  get Phys(data[n=1+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:377f2000
  set TERM
  ph data[0]=0:377f1000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3905c540, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff230
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fcd6b0, OrigWordsRequested 0x6200, DevSize 0x62
IdeReadWrite (REQ): Starting sector is 38fcd6b0, Number of WORDS 0x6200, DevSize 0x62
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f74d5000, count c400, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f74d5000)
AtapiVirtToPhysAddr_: f74d5000 -> 00000000:36a81000
  ph data[0]=0:36a81000 (fff)
  get Phys(data[n=1+1000]=f74d6000)
AtapiVirtToPhysAddr_: f74d6000 -> 00000000:36a82000
  ph data[0]=0:36a81000 (1fff)
  get Phys(data[n=1+2000]=f74d7000)
AtapiVirtToPhysAddr_: f74d7000 -> 00000000:36a83000
  ph data[0]=0:36a81000 (2fff)
  get Phys(data[n=1+3000]=f74d8000)
AtapiVirtToPhysAddr_: f74d8000 -> 00000000:36a7c000
  ph data[1]=0:36a7c000 (fff)
  get Phys(data[n=2+1000]=f74d9000)
AtapiVirtToPhysAddr_: f74d9000 -> 00000000:36a7d000
  ph data[1]=0:36a7c000 (1fff)
  get Phys(data[n=2+2000]=f74da000)
AtapiVirtToPhysAddr_: f74da000 -> 00000000:36a7e000
  ph data[1]=0:36a7c000 (2fff)
  get Phys(data[n=2+3000]=f74db000)
AtapiVirtToPhysAddr_: f74db000 -> 00000000:36a7f000
  ph data[1]=0:36a7c000 (3fff)
  get Phys(data[n=2+4000]=f74dc000)
AtapiVirtToPhysAddr_: f74dc000 -> 00000000:36a80000
  ph data[1]=0:36a7c000 (4fff)
  get Phys(data[n=2+5000]=f74dd000)
AtapiVirtToPhysAddr_: f74dd000 -> 00000000:36a89000
  ph data[2]=0:36a89000 (fff)
  get Phys(data[n=3+1000]=f74de000)
AtapiVirtToPhysAddr_: f74de000 -> 00000000:36a8a000
  ph data[2]=0:36a89000 (1fff)
  get Phys(data[n=3+2000]=f74df000)
AtapiVirtToPhysAddr_: f74df000 -> 00000000:36a8b000
  ph data[2]=0:36a89000 (2fff)
  get Phys(data[n=3+3000]=f74e0000)
AtapiVirtToPhysAddr_: f74e0000 -> 00000000:36a84000
  ph data[3]=0:36a84000 (fff)
  get Phys(data[n=4+1000]=f74e1000)
AtapiVirtToPhysAddr_: f74e1000 -> 00000000:36a85000
  set TERM
  ph data[3]=0:36a84000 (13ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fcd6b0, Count 0x62(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 6200, WordsLeft 6200
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered c400, full size c400
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74fec68
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3905c540, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 3905c540, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:36099000
  ph data[0]=0:36099000 (fff)
  get Phys(data[n=1+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:3609a000
  set TERM
  ph data[0]=0:36099000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3905c540, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff230
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fcd6b0, OrigWordsRequested 0x6200, DevSize 0x62
IdeReadWrite (REQ): Starting sector is 38fcd6b0, Number of WORDS 0x6200, DevSize 0x62
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f74d5000, count c400, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f74d5000)
AtapiVirtToPhysAddr_: f74d5000 -> 00000000:36081000
  ph data[0]=0:36081000 (fff)
  get Phys(data[n=1+1000]=f74d6000)
AtapiVirtToPhysAddr_: f74d6000 -> 00000000:36082000
  ph data[0]=0:36081000 (1fff)
  get Phys(data[n=1+2000]=f74d7000)
AtapiVirtToPhysAddr_: f74d7000 -> 00000000:36083000
  ph data[0]=0:36081000 (2fff)
  get Phys(data[n=1+3000]=f74d8000)
AtapiVirtToPhysAddr_: f74d8000 -> 00000000:36084000
  ph data[0]=0:36081000 (3fff)
  get Phys(data[n=1+4000]=f74d9000)
AtapiVirtToPhysAddr_: f74d9000 -> 00000000:36085000
  ph data[0]=0:36081000 (4fff)
  get Phys(data[n=1+5000]=f74da000)
AtapiVirtToPhysAddr_: f74da000 -> 00000000:3607e000
  ph data[1]=0:3607e000 (fff)
  get Phys(data[n=2+1000]=f74db000)
AtapiVirtToPhysAddr_: f74db000 -> 00000000:3607f000
  ph data[1]=0:3607e000 (1fff)
  get Phys(data[n=2+2000]=f74dc000)
AtapiVirtToPhysAddr_: f74dc000 -> 00000000:36080000
  ph data[1]=0:3607e000 (2fff)
  get Phys(data[n=2+3000]=f74dd000)
AtapiVirtToPhysAddr_: f74dd000 -> 00000000:36089000
  ph data[2]=0:36089000 (fff)
  get Phys(data[n=3+1000]=f74de000)
AtapiVirtToPhysAddr_: f74de000 -> 00000000:3608a000
  ph data[2]=0:36089000 (1fff)
  get Phys(data[n=3+2000]=f74df000)
AtapiVirtToPhysAddr_: f74df000 -> 00000000:3608b000
  ph data[2]=0:36089000 (2fff)
  get Phys(data[n=3+3000]=f74e0000)
AtapiVirtToPhysAddr_: f74e0000 -> 00000000:3608c000
  ph data[2]=0:36089000 (3fff)
  get Phys(data[n=3+4000]=f74e1000)
AtapiVirtToPhysAddr_: f74e1000 -> 00000000:3608d000
  set TERM
  ph data[2]=0:36089000 (43ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fcd6b0, Count 0x62(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x3, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 6200, WordsLeft 6200
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered c400, full size c400
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff60c
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fcd6b0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fcd6b0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:36041000
  ph data[0]=0:36041000 (fff)
  get Phys(data[n=1+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:36042000
  set TERM
  ph data[0]=0:36041000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fcd6b0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(win32ss/user/ntuser/winsta.c:501) err: Initializing input window station
(win32ss/user/ntuser/class.c:2335) err: SYSTEMCUR(ARROW) == NULL, should not happen!!
(win32ss/user/ntuser/class.c:2335) err: SYSTEMCUR(ARROW) == NULL, should not happen!!
(win32ss/user/ntuser/class.c:2335) err: SYSTEMCUR(ARROW) == NULL, should not happen!!
(win32ss/user/ntuser/class.c:2335) err: SYSTEMCUR(ARROW) == NULL, should not happen!!
(win32ss/user/ntuser/class.c:2335) err: SYSTEMCUR(ARROW) == NULL, should not happen!!
(win32ss/user/ntuser/class.c:2335) err: SYSTEMCUR(ARROW) == NULL, should not happen!!
(win32ss/user/ntuser/desktop.c:3283) err: The process 0xB63A1780 'winlogon.exe' didn't have an assigned startup desktop before, assigning it now!
(win32ss/user/ntuser/desktop.c:3221) err: Attempted to change thread desktop although the thread has windows!
(win32ss/user/winsrv/usersrv/init.c:162) We are logged off
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74fe758
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fcd5d0, OrigWordsRequested 0xc00, DevSize 0xc
IdeReadWrite (REQ): Starting sector is 38fcd5d0, Number of WORDS 0xc00, DevSize 0xc
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f750e000, count 1800, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:3610c000
  ph data[0]=0:3610c000 (fff)
  get Phys(data[n=1+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:36105000
  set TERM
  ph data[1]=0:36105000 (7ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fcd5d0, Count 0xc(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x2, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered c00, WordsLeft c00
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 1800, full size 1800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74feb34
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fcd5d0, OrigWordsRequested 0xc00, DevSize 0xc
IdeReadWrite (REQ): Starting sector is 38fcd5d0, Number of WORDS 0xc00, DevSize 0xc
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f750e000, count 1800, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:35914000
  ph data[0]=0:35914000 (fff)
  get Phys(data[n=1+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:35915000
  set TERM
  ph data[0]=0:35914000 (17ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fcd5d0, Count 0xc(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered c00, WordsLeft c00
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 1800, full size 1800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\System32\kbdus.dll at F7070000 with 5 pages
(ntoskrnl/mm/ARM3/sysldr.c:2416) Skipping NT 4 driver @ F7070000
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff180
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fde550, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fde550, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7030000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7030000)
AtapiVirtToPhysAddr_: f7030000 -> 00000000:35908000
  ph data[0]=0:35908000 (fff)
  get Phys(data[n=1+1000]=f7031000)
AtapiVirtToPhysAddr_: f7031000 -> 00000000:35909000
  ph data[0]=0:35908000 (1fff)
  get Phys(data[n=1+2000]=f7032000)
AtapiVirtToPhysAddr_: f7032000 -> 00000000:3590a000
  ph data[0]=0:35908000 (2fff)
  get Phys(data[n=1+3000]=f7033000)
AtapiVirtToPhysAddr_: f7033000 -> 00000000:3590b000
  ph data[0]=0:35908000 (3fff)
  get Phys(data[n=1+4000]=f7034000)
AtapiVirtToPhysAddr_: f7034000 -> 00000000:3591c000
  ph data[1]=0:3591c000 (fff)
  get Phys(data[n=2+1000]=f7035000)
AtapiVirtToPhysAddr_: f7035000 -> 00000000:3591d000
  ph data[1]=0:3591c000 (1fff)
  get Phys(data[n=2+2000]=f7036000)
AtapiVirtToPhysAddr_: f7036000 -> 00000000:3591e000
  ph data[1]=0:3591c000 (2fff)
  get Phys(data[n=2+3000]=f7037000)
AtapiVirtToPhysAddr_: f7037000 -> 00000000:35917000
  ph data[2]=0:35917000 (fff)
  get Phys(data[n=3+1000]=f7038000)
AtapiVirtToPhysAddr_: f7038000 -> 00000000:35910000
  ph data[3]=0:35910000 (fff)
  get Phys(data[n=4+1000]=f7039000)
AtapiVirtToPhysAddr_: f7039000 -> 00000000:35911000
  ph data[3]=0:35910000 (1fff)
  get Phys(data[n=4+2000]=f703a000)
AtapiVirtToPhysAddr_: f703a000 -> 00000000:35912000
  ph data[3]=0:35910000 (2fff)
  get Phys(data[n=4+3000]=f703b000)
AtapiVirtToPhysAddr_: f703b000 -> 00000000:35913000
  ph data[3]=0:35910000 (3fff)
  get Phys(data[n=4+4000]=f703c000)
AtapiVirtToPhysAddr_: f703c000 -> 00000000:35924000
  ph data[4]=0:35924000 (fff)
  get Phys(data[n=5+1000]=f703d000)
AtapiVirtToPhysAddr_: f703d000 -> 00000000:35925000
  ph data[4]=0:35924000 (1fff)
  get Phys(data[n=5+2000]=f703e000)
AtapiVirtToPhysAddr_: f703e000 -> 00000000:35926000
  ph data[4]=0:35924000 (2fff)
  get Phys(data[n=5+3000]=f703f000)
AtapiVirtToPhysAddr_: f703f000 -> 00000000:3591f000
  set TERM
  ph data[5]=0:3591f000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fde550, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x6, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff180
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fde5d0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fde5d0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7040000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7040000)
AtapiVirtToPhysAddr_: f7040000 -> 00000000:35918000
  ph data[0]=0:35918000 (fff)
  get Phys(data[n=1+1000]=f7041000)
AtapiVirtToPhysAddr_: f7041000 -> 00000000:35919000
  ph data[0]=0:35918000 (1fff)
  get Phys(data[n=1+2000]=f7042000)
AtapiVirtToPhysAddr_: f7042000 -> 00000000:3591a000
  ph data[0]=0:35918000 (2fff)
  get Phys(data[n=1+3000]=f7043000)
AtapiVirtToPhysAddr_: f7043000 -> 00000000:3591b000
  ph data[0]=0:35918000 (3fff)
  get Phys(data[n=1+4000]=f7044000)
AtapiVirtToPhysAddr_: f7044000 -> 00000000:3592c000
  ph data[1]=0:3592c000 (fff)
  get Phys(data[n=2+1000]=f7045000)
AtapiVirtToPhysAddr_: f7045000 -> 00000000:3592d000
  ph data[1]=0:3592c000 (1fff)
  get Phys(data[n=2+2000]=f7046000)
AtapiVirtToPhysAddr_: f7046000 -> 00000000:3592e000
  ph data[1]=0:3592c000 (2fff)
  get Phys(data[n=2+3000]=f7047000)
AtapiVirtToPhysAddr_: f7047000 -> 00000000:35927000
  ph data[2]=0:35927000 (fff)
  get Phys(data[n=3+1000]=f7048000)
AtapiVirtToPhysAddr_: f7048000 -> 00000000:35920000
  ph data[3]=0:35920000 (fff)
  get Phys(data[n=4+1000]=f7049000)
AtapiVirtToPhysAddr_: f7049000 -> 00000000:35921000
  ph data[3]=0:35920000 (1fff)
  get Phys(data[n=4+2000]=f704a000)
AtapiVirtToPhysAddr_: f704a000 -> 00000000:35922000
  ph data[3]=0:35920000 (2fff)
  get Phys(data[n=4+3000]=f704b000)
AtapiVirtToPhysAddr_: f704b000 -> 00000000:35923000
  ph data[3]=0:35920000 (3fff)
  get Phys(data[n=4+4000]=f704c000)
AtapiVirtToPhysAddr_: f704c000 -> 00000000:35934000
  ph data[4]=0:35934000 (fff)
  get Phys(data[n=5+1000]=f704d000)
AtapiVirtToPhysAddr_: f704d000 -> 00000000:35935000
  ph data[4]=0:35934000 (1fff)
  get Phys(data[n=5+2000]=f704e000)
AtapiVirtToPhysAddr_: f704e000 -> 00000000:35936000
  ph data[4]=0:35934000 (2fff)
  get Phys(data[n=5+3000]=f704f000)
AtapiVirtToPhysAddr_: f704f000 -> 00000000:3592f000
  set TERM
  ph data[5]=0:3592f000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff180
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fde650, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fde650, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7050000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:35928000
  ph data[0]=0:35928000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:35929000
  ph data[0]=0:35928000 (1fff)
  get Phys(data[n=1+2000]=f7052000)
AtapiVirtToPhysAddr_: f7052000 -> 00000000:3592a000
  ph data[0]=0:35928000 (2fff)
  get Phys(data[n=1+3000]=f7053000)
AtapiVirtToPhysAddr_: f7053000 -> 00000000:3592b000
  ph data[0]=0:35928000 (3fff)
  get Phys(data[n=1+4000]=f7054000)
AtapiVirtToPhysAddr_: f7054000 -> 00000000:3593c000
  ph data[1]=0:3593c000 (fff)
  get Phys(data[n=2+1000]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:3593d000
  ph data[1]=0:3593c000 (1fff)
  get Phys(data[n=2+2000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:3593e000
  ph data[1]=0:3593c000 (2fff)
  get Phys(data[n=2+3000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:35937000
  ph data[2]=0:35937000 (fff)
  get Phys(data[n=3+1000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:35930000
  ph data[3]=0:35930000 (fff)
  get Phys(data[n=4+1000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:35931000
  ph data[3]=0:35930000 (1fff)
  get Phys(data[n=4+2000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:35932000
  ph data[3]=0:35930000 (2fff)
  get Phys(data[n=4+3000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:35933000
  ph data[3]=0:35930000 (3fff)
  get Phys(data[n=4+4000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:35944000
  ph data[4]=0:35944000 (fff)
  get Phys(data[n=5+1000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:35945000
  ph data[4]=0:35944000 (1fff)
  get Phys(data[n=5+2000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:35946000
  ph data[4]=0:35944000 (2fff)
  get Phys(data[n=5+3000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:3593f000
  set TERM
  ph data[5]=0:3593f000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff180
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fde6d0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fde6d0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7060000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:35938000
  ph data[0]=0:35938000 (fff)
  get Phys(data[n=1+1000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:35939000
  ph data[0]=0:35938000 (1fff)
  get Phys(data[n=1+2000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:3593a000
  ph data[0]=0:35938000 (2fff)
  get Phys(data[n=1+3000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:3593b000
  ph data[0]=0:35938000 (3fff)
  get Phys(data[n=1+4000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:3594c000
  ph data[1]=0:3594c000 (fff)
  get Phys(data[n=2+1000]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:3594d000
  ph data[1]=0:3594c000 (1fff)
  get Phys(data[n=2+2000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:3594e000
  ph data[1]=0:3594c000 (2fff)
  get Phys(data[n=2+3000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:35947000
  ph data[2]=0:35947000 (fff)
  get Phys(data[n=3+1000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:35940000
  ph data[3]=0:35940000 (fff)
  get Phys(data[n=4+1000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:35941000
  ph data[3]=0:35940000 (1fff)
  get Phys(data[n=4+2000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:35942000
  ph data[3]=0:35940000 (2fff)
  get Phys(data[n=4+3000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:35943000
  ph data[3]=0:35940000 (3fff)
  get Phys(data[n=4+4000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:35954000
  ph data[4]=0:35954000 (fff)
  get Phys(data[n=5+1000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:35955000
  ph data[4]=0:35954000 (1fff)
  get Phys(data[n=5+2000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:35956000
  ph data[4]=0:35954000 (2fff)
  get Phys(data[n=5+3000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:3594f000
  set TERM
  ph data[5]=0:3594f000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fde5d0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x6, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fde650, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x6, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fde6d0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x6, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
WARNING:  HvHiveWillShrink at sdk/lib/cmlib/hivewrt.c:280 is UNIMPLEMENTED!
WARNING:  HvpWriteLog at sdk/lib/cmlib/hivewrt.c:29 is UNIMPLEMENTED!
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff210
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001d40, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001d40, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7030000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7030000)
AtapiVirtToPhysAddr_: f7030000 -> 00000000:34da8000
  ph data[0]=0:34da8000 (fff)
  get Phys(data[n=1+1000]=f7031000)
AtapiVirtToPhysAddr_: f7031000 -> 00000000:34da1000
  ph data[1]=0:34da1000 (fff)
  get Phys(data[n=2+1000]=f7032000)
AtapiVirtToPhysAddr_: f7032000 -> 00000000:34da2000
  ph data[1]=0:34da1000 (1fff)
  get Phys(data[n=2+2000]=f7033000)
AtapiVirtToPhysAddr_: f7033000 -> 00000000:34da3000
  ph data[1]=0:34da1000 (2fff)
  get Phys(data[n=2+3000]=f7034000)
AtapiVirtToPhysAddr_: f7034000 -> 00000000:34da4000
  ph data[1]=0:34da1000 (3fff)
  get Phys(data[n=2+4000]=f7035000)
AtapiVirtToPhysAddr_: f7035000 -> 00000000:34da5000
  ph data[1]=0:34da1000 (4fff)
  get Phys(data[n=2+5000]=f7036000)
AtapiVirtToPhysAddr_: f7036000 -> 00000000:34da6000
  ph data[1]=0:34da1000 (5fff)
  get Phys(data[n=2+6000]=f7037000)
AtapiVirtToPhysAddr_: f7037000 -> 00000000:34da7000
  ph data[1]=0:34da1000 (6fff)
  get Phys(data[n=2+7000]=f7038000)
AtapiVirtToPhysAddr_: f7038000 -> 00000000:34db0000
  ph data[2]=0:34db0000 (fff)
  get Phys(data[n=3+1000]=f7039000)
AtapiVirtToPhysAddr_: f7039000 -> 00000000:34da9000
  ph data[3]=0:34da9000 (fff)
  get Phys(data[n=4+1000]=f703a000)
AtapiVirtToPhysAddr_: f703a000 -> 00000000:34daa000
  ph data[3]=0:34da9000 (1fff)
  get Phys(data[n=4+2000]=f703b000)
AtapiVirtToPhysAddr_: f703b000 -> 00000000:34dab000
  ph data[3]=0:34da9000 (2fff)
  get Phys(data[n=4+3000]=f703c000)
AtapiVirtToPhysAddr_: f703c000 -> 00000000:34dac000
  ph data[3]=0:34da9000 (3fff)
  get Phys(data[n=4+4000]=f703d000)
AtapiVirtToPhysAddr_: f703d000 -> 00000000:34dad000
  ph data[3]=0:34da9000 (4fff)
  get Phys(data[n=4+5000]=f703e000)
AtapiVirtToPhysAddr_: f703e000 -> 00000000:34dae000
  ph data[3]=0:34da9000 (5fff)
  get Phys(data[n=4+6000]=f703f000)
AtapiVirtToPhysAddr_: f703f000 -> 00000000:34daf000
  set TERM
  ph data[3]=0:34da9000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001d40, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff210
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001dc0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001dc0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7040000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7040000)
AtapiVirtToPhysAddr_: f7040000 -> 00000000:34db8000
  ph data[0]=0:34db8000 (fff)
  get Phys(data[n=1+1000]=f7041000)
AtapiVirtToPhysAddr_: f7041000 -> 00000000:34db1000
  ph data[1]=0:34db1000 (fff)
  get Phys(data[n=2+1000]=f7042000)
AtapiVirtToPhysAddr_: f7042000 -> 00000000:34db2000
  ph data[1]=0:34db1000 (1fff)
  get Phys(data[n=2+2000]=f7043000)
AtapiVirtToPhysAddr_: f7043000 -> 00000000:34db3000
  ph data[1]=0:34db1000 (2fff)
  get Phys(data[n=2+3000]=f7044000)
AtapiVirtToPhysAddr_: f7044000 -> 00000000:34db4000
  ph data[1]=0:34db1000 (3fff)
  get Phys(data[n=2+4000]=f7045000)
AtapiVirtToPhysAddr_: f7045000 -> 00000000:34db5000
  ph data[1]=0:34db1000 (4fff)
  get Phys(data[n=2+5000]=f7046000)
AtapiVirtToPhysAddr_: f7046000 -> 00000000:34db6000
  ph data[1]=0:34db1000 (5fff)
  get Phys(data[n=2+6000]=f7047000)
AtapiVirtToPhysAddr_: f7047000 -> 00000000:34db7000
  ph data[1]=0:34db1000 (6fff)
  get Phys(data[n=2+7000]=f7048000)
AtapiVirtToPhysAddr_: f7048000 -> 00000000:34dc0000
  ph data[2]=0:34dc0000 (fff)
  get Phys(data[n=3+1000]=f7049000)
AtapiVirtToPhysAddr_: f7049000 -> 00000000:34db9000
  ph data[3]=0:34db9000 (fff)
  get Phys(data[n=4+1000]=f704a000)
AtapiVirtToPhysAddr_: f704a000 -> 00000000:34dba000
  ph data[3]=0:34db9000 (1fff)
  get Phys(data[n=4+2000]=f704b000)
AtapiVirtToPhysAddr_: f704b000 -> 00000000:34dbb000
  ph data[3]=0:34db9000 (2fff)
  get Phys(data[n=4+3000]=f704c000)
AtapiVirtToPhysAddr_: f704c000 -> 00000000:34dbc000
  ph data[3]=0:34db9000 (3fff)
  get Phys(data[n=4+4000]=f704d000)
AtapiVirtToPhysAddr_: f704d000 -> 00000000:34dbd000
  ph data[3]=0:34db9000 (4fff)
  get Phys(data[n=4+5000]=f704e000)
AtapiVirtToPhysAddr_: f704e000 -> 00000000:34dbe000
  ph data[3]=0:34db9000 (5fff)
  get Phys(data[n=4+6000]=f704f000)
AtapiVirtToPhysAddr_: f704f000 -> 00000000:34dbf000
  set TERM
  ph data[3]=0:34db9000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff210
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001e40, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001e40, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7050000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:34dc8000
  ph data[0]=0:34dc8000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:34dc1000
  ph data[1]=0:34dc1000 (fff)
  get Phys(data[n=2+1000]=f7052000)
AtapiVirtToPhysAddr_: f7052000 -> 00000000:34dc2000
  ph data[1]=0:34dc1000 (1fff)
  get Phys(data[n=2+2000]=f7053000)
AtapiVirtToPhysAddr_: f7053000 -> 00000000:34dc3000
  ph data[1]=0:34dc1000 (2fff)
  get Phys(data[n=2+3000]=f7054000)
AtapiVirtToPhysAddr_: f7054000 -> 00000000:34dc4000
  ph data[1]=0:34dc1000 (3fff)
  get Phys(data[n=2+4000]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:34dc5000
  ph data[1]=0:34dc1000 (4fff)
  get Phys(data[n=2+5000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:34dc6000
  ph data[1]=0:34dc1000 (5fff)
  get Phys(data[n=2+6000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:34dc7000
  ph data[1]=0:34dc1000 (6fff)
  get Phys(data[n=2+7000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:34dd0000
  ph data[2]=0:34dd0000 (fff)
  get Phys(data[n=3+1000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:34dc9000
  ph data[3]=0:34dc9000 (fff)
  get Phys(data[n=4+1000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:34dca000
  ph data[3]=0:34dc9000 (1fff)
  get Phys(data[n=4+2000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:34dcb000
  ph data[3]=0:34dc9000 (2fff)
  get Phys(data[n=4+3000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:34dcc000
  ph data[3]=0:34dc9000 (3fff)
  get Phys(data[n=4+4000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:34dcd000
  ph data[3]=0:34dc9000 (4fff)
  get Phys(data[n=4+5000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:34dce000
  ph data[3]=0:34dc9000 (5fff)
  get Phys(data[n=4+6000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:34dcf000
  set TERM
  ph data[3]=0:34dc9000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff210
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001ec0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001ec0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7060000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:34dd8000
  ph data[0]=0:34dd8000 (fff)
  get Phys(data[n=1+1000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:34dd1000
  ph data[1]=0:34dd1000 (fff)
  get Phys(data[n=2+1000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:34dd2000
  ph data[1]=0:34dd1000 (1fff)
  get Phys(data[n=2+2000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:34dd3000
  ph data[1]=0:34dd1000 (2fff)
  get Phys(data[n=2+3000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:34dd4000
  ph data[1]=0:34dd1000 (3fff)
  get Phys(data[n=2+4000]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:34dd5000
  ph data[1]=0:34dd1000 (4fff)
  get Phys(data[n=2+5000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:34dd6000
  ph data[1]=0:34dd1000 (5fff)
  get Phys(data[n=2+6000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:34dd7000
  ph data[1]=0:34dd1000 (6fff)
  get Phys(data[n=2+7000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:34de0000
  ph data[2]=0:34de0000 (fff)
  get Phys(data[n=3+1000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:34dd9000
  ph data[3]=0:34dd9000 (fff)
  get Phys(data[n=4+1000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:34dda000
  ph data[3]=0:34dd9000 (1fff)
  get Phys(data[n=4+2000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:34ddb000
  ph data[3]=0:34dd9000 (2fff)
  get Phys(data[n=4+3000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:34ddc000
  ph data[3]=0:34dd9000 (3fff)
  get Phys(data[n=4+4000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:34ddd000
  ph data[3]=0:34dd9000 (4fff)
  get Phys(data[n=4+5000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:34dde000
  ph data[3]=0:34dd9000 (5fff)
  get Phys(data[n=4+6000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:34ddf000
  set TERM
  ph data[3]=0:34dd9000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001dc0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001e40, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001ec0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff210
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001f40, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001f40, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7030000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7030000)
AtapiVirtToPhysAddr_: f7030000 -> 00000000:34488000
  ph data[0]=0:34488000 (fff)
  get Phys(data[n=1+1000]=f7031000)
AtapiVirtToPhysAddr_: f7031000 -> 00000000:34489000
  ph data[0]=0:34488000 (1fff)
  get Phys(data[n=1+2000]=f7032000)
AtapiVirtToPhysAddr_: f7032000 -> 00000000:3448a000
  ph data[0]=0:34488000 (2fff)
  get Phys(data[n=1+3000]=f7033000)
AtapiVirtToPhysAddr_: f7033000 -> 00000000:3448b000
  ph data[0]=0:34488000 (3fff)
  get Phys(data[n=1+4000]=f7034000)
AtapiVirtToPhysAddr_: f7034000 -> 00000000:3448c000
  ph data[0]=0:34488000 (4fff)
  get Phys(data[n=1+5000]=f7035000)
AtapiVirtToPhysAddr_: f7035000 -> 00000000:34485000
  ph data[1]=0:34485000 (fff)
  get Phys(data[n=2+1000]=f7036000)
AtapiVirtToPhysAddr_: f7036000 -> 00000000:34486000
  ph data[1]=0:34485000 (1fff)
  get Phys(data[n=2+2000]=f7037000)
AtapiVirtToPhysAddr_: f7037000 -> 00000000:34487000
  ph data[1]=0:34485000 (2fff)
  get Phys(data[n=2+3000]=f7038000)
AtapiVirtToPhysAddr_: f7038000 -> 00000000:34490000
  ph data[2]=0:34490000 (fff)
  get Phys(data[n=3+1000]=f7039000)
AtapiVirtToPhysAddr_: f7039000 -> 00000000:34491000
  ph data[2]=0:34490000 (1fff)
  get Phys(data[n=3+2000]=f703a000)
AtapiVirtToPhysAddr_: f703a000 -> 00000000:34492000
  ph data[2]=0:34490000 (2fff)
  get Phys(data[n=3+3000]=f703b000)
AtapiVirtToPhysAddr_: f703b000 -> 00000000:34493000
  ph data[2]=0:34490000 (3fff)
  get Phys(data[n=3+4000]=f703c000)
AtapiVirtToPhysAddr_: f703c000 -> 00000000:34494000
  ph data[2]=0:34490000 (4fff)
  get Phys(data[n=3+5000]=f703d000)
AtapiVirtToPhysAddr_: f703d000 -> 00000000:3448d000
  ph data[3]=0:3448d000 (fff)
  get Phys(data[n=4+1000]=f703e000)
AtapiVirtToPhysAddr_: f703e000 -> 00000000:3448e000
  ph data[3]=0:3448d000 (1fff)
  get Phys(data[n=4+2000]=f703f000)
AtapiVirtToPhysAddr_: f703f000 -> 00000000:3448f000
  set TERM
  ph data[3]=0:3448d000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001f40, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff210
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39001fc0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001fc0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7040000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7040000)
AtapiVirtToPhysAddr_: f7040000 -> 00000000:34498000
  ph data[0]=0:34498000 (fff)
  get Phys(data[n=1+1000]=f7041000)
AtapiVirtToPhysAddr_: f7041000 -> 00000000:34499000
  ph data[0]=0:34498000 (1fff)
  get Phys(data[n=1+2000]=f7042000)
AtapiVirtToPhysAddr_: f7042000 -> 00000000:3449a000
  ph data[0]=0:34498000 (2fff)
  get Phys(data[n=1+3000]=f7043000)
AtapiVirtToPhysAddr_: f7043000 -> 00000000:3449b000
  ph data[0]=0:34498000 (3fff)
  get Phys(data[n=1+4000]=f7044000)
AtapiVirtToPhysAddr_: f7044000 -> 00000000:3449c000
  ph data[0]=0:34498000 (4fff)
  get Phys(data[n=1+5000]=f7045000)
AtapiVirtToPhysAddr_: f7045000 -> 00000000:34495000
  ph data[1]=0:34495000 (fff)
  get Phys(data[n=2+1000]=f7046000)
AtapiVirtToPhysAddr_: f7046000 -> 00000000:34496000
  ph data[1]=0:34495000 (1fff)
  get Phys(data[n=2+2000]=f7047000)
AtapiVirtToPhysAddr_: f7047000 -> 00000000:34497000
  ph data[1]=0:34495000 (2fff)
  get Phys(data[n=2+3000]=f7048000)
AtapiVirtToPhysAddr_: f7048000 -> 00000000:344a0000
  ph data[2]=0:344a0000 (fff)
  get Phys(data[n=3+1000]=f7049000)
AtapiVirtToPhysAddr_: f7049000 -> 00000000:344a1000
  ph data[2]=0:344a0000 (1fff)
  get Phys(data[n=3+2000]=f704a000)
AtapiVirtToPhysAddr_: f704a000 -> 00000000:344a2000
  ph data[2]=0:344a0000 (2fff)
  get Phys(data[n=3+3000]=f704b000)
AtapiVirtToPhysAddr_: f704b000 -> 00000000:344a3000
  ph data[2]=0:344a0000 (3fff)
  get Phys(data[n=3+4000]=f704c000)
AtapiVirtToPhysAddr_: f704c000 -> 00000000:344a4000
  ph data[2]=0:344a0000 (4fff)
  get Phys(data[n=3+5000]=f704d000)
AtapiVirtToPhysAddr_: f704d000 -> 00000000:3449d000
  ph data[3]=0:3449d000 (fff)
  get Phys(data[n=4+1000]=f704e000)
AtapiVirtToPhysAddr_: f704e000 -> 00000000:3449e000
  ph data[3]=0:3449d000 (1fff)
  get Phys(data[n=4+2000]=f704f000)
AtapiVirtToPhysAddr_: f704f000 -> 00000000:3449f000
  set TERM
  ph data[3]=0:3449d000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff210
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002040, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002040, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7050000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:344a8000
  ph data[0]=0:344a8000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:344a9000
  ph data[0]=0:344a8000 (1fff)
  get Phys(data[n=1+2000]=f7052000)
AtapiVirtToPhysAddr_: f7052000 -> 00000000:344aa000
  ph data[0]=0:344a8000 (2fff)
  get Phys(data[n=1+3000]=f7053000)
AtapiVirtToPhysAddr_: f7053000 -> 00000000:344ab000
  ph data[0]=0:344a8000 (3fff)
  get Phys(data[n=1+4000]=f7054000)
AtapiVirtToPhysAddr_: f7054000 -> 00000000:344ac000
  ph data[0]=0:344a8000 (4fff)
  get Phys(data[n=1+5000]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:344a5000
  ph data[1]=0:344a5000 (fff)
  get Phys(data[n=2+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:344a6000
  ph data[1]=0:344a5000 (1fff)
  get Phys(data[n=2+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:344a7000
  ph data[1]=0:344a5000 (2fff)
  get Phys(data[n=2+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:344b0000
  ph data[2]=0:344b0000 (fff)
  get Phys(data[n=3+1000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:344b1000
  ph data[2]=0:344b0000 (1fff)
  get Phys(data[n=3+2000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:344b2000
  ph data[2]=0:344b0000 (2fff)
  get Phys(data[n=3+3000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:344b3000
  ph data[2]=0:344b0000 (3fff)
  get Phys(data[n=3+4000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:344b4000
  ph data[2]=0:344b0000 (4fff)
  get Phys(data[n=3+5000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:344ad000
  ph data[3]=0:344ad000 (fff)
  get Phys(data[n=4+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:344ae000
  ph data[3]=0:344ad000 (1fff)
  get Phys(data[n=4+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:344af000
  set TERM
  ph data[3]=0:344ad000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff210
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390020c0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390020c0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7060000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:344b8000
  ph data[0]=0:344b8000 (fff)
  get Phys(data[n=1+1000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:344b9000
  ph data[0]=0:344b8000 (1fff)
  get Phys(data[n=1+2000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:344ba000
  ph data[0]=0:344b8000 (2fff)
  get Phys(data[n=1+3000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:344bb000
  ph data[0]=0:344b8000 (3fff)
  get Phys(data[n=1+4000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:344bc000
  ph data[0]=0:344b8000 (4fff)
  get Phys(data[n=1+5000]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:344b5000
  ph data[1]=0:344b5000 (fff)
  get Phys(data[n=2+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:344b6000
  ph data[1]=0:344b5000 (1fff)
  get Phys(data[n=2+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:344b7000
  ph data[1]=0:344b5000 (2fff)
  get Phys(data[n=2+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:344c0000
  ph data[2]=0:344c0000 (fff)
  get Phys(data[n=3+1000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:344c1000
  ph data[2]=0:344c0000 (1fff)
  get Phys(data[n=3+2000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:344c2000
  ph data[2]=0:344c0000 (2fff)
  get Phys(data[n=3+3000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:344c3000
  ph data[2]=0:344c0000 (3fff)
  get Phys(data[n=3+4000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:344c4000
  ph data[2]=0:344c0000 (4fff)
  get Phys(data[n=3+5000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:344bd000
  ph data[3]=0:344bd000 (fff)
  get Phys(data[n=4+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:344be000
  ph data[3]=0:344bd000 (1fff)
  get Phys(data[n=4+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:344bf000
  set TERM
  ph data[3]=0:344bd000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001fc0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002040, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390020c0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff210
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002140, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002140, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7030000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7030000)
AtapiVirtToPhysAddr_: f7030000 -> 00000000:34008000
  ph data[0]=0:34008000 (fff)
  get Phys(data[n=1+1000]=f7031000)
AtapiVirtToPhysAddr_: f7031000 -> 00000000:34001000
  ph data[1]=0:34001000 (fff)
  get Phys(data[n=2+1000]=f7032000)
AtapiVirtToPhysAddr_: f7032000 -> 00000000:34002000
  ph data[1]=0:34001000 (1fff)
  get Phys(data[n=2+2000]=f7033000)
AtapiVirtToPhysAddr_: f7033000 -> 00000000:34003000
  ph data[1]=0:34001000 (2fff)
  get Phys(data[n=2+3000]=f7034000)
AtapiVirtToPhysAddr_: f7034000 -> 00000000:34004000
  ph data[1]=0:34001000 (3fff)
  get Phys(data[n=2+4000]=f7035000)
AtapiVirtToPhysAddr_: f7035000 -> 00000000:34005000
  ph data[1]=0:34001000 (4fff)
  get Phys(data[n=2+5000]=f7036000)
AtapiVirtToPhysAddr_: f7036000 -> 00000000:34006000
  ph data[1]=0:34001000 (5fff)
  get Phys(data[n=2+6000]=f7037000)
AtapiVirtToPhysAddr_: f7037000 -> 00000000:34007000
  ph data[1]=0:34001000 (6fff)
  get Phys(data[n=2+7000]=f7038000)
AtapiVirtToPhysAddr_: f7038000 -> 00000000:34010000
  ph data[2]=0:34010000 (fff)
  get Phys(data[n=3+1000]=f7039000)
AtapiVirtToPhysAddr_: f7039000 -> 00000000:34009000
  ph data[3]=0:34009000 (fff)
  get Phys(data[n=4+1000]=f703a000)
AtapiVirtToPhysAddr_: f703a000 -> 00000000:3400a000
  ph data[3]=0:34009000 (1fff)
  get Phys(data[n=4+2000]=f703b000)
AtapiVirtToPhysAddr_: f703b000 -> 00000000:3400b000
  ph data[3]=0:34009000 (2fff)
  get Phys(data[n=4+3000]=f703c000)
AtapiVirtToPhysAddr_: f703c000 -> 00000000:3400c000
  ph data[3]=0:34009000 (3fff)
  get Phys(data[n=4+4000]=f703d000)
AtapiVirtToPhysAddr_: f703d000 -> 00000000:3400d000
  ph data[3]=0:34009000 (4fff)
  get Phys(data[n=4+5000]=f703e000)
AtapiVirtToPhysAddr_: f703e000 -> 00000000:3400e000
  ph data[3]=0:34009000 (5fff)
  get Phys(data[n=4+6000]=f703f000)
AtapiVirtToPhysAddr_: f703f000 -> 00000000:3400f000
  set TERM
  ph data[3]=0:34009000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002140, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff210
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390021c0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390021c0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7040000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7040000)
AtapiVirtToPhysAddr_: f7040000 -> 00000000:34018000
  ph data[0]=0:34018000 (fff)
  get Phys(data[n=1+1000]=f7041000)
AtapiVirtToPhysAddr_: f7041000 -> 00000000:34011000
  ph data[1]=0:34011000 (fff)
  get Phys(data[n=2+1000]=f7042000)
AtapiVirtToPhysAddr_: f7042000 -> 00000000:34012000
  ph data[1]=0:34011000 (1fff)
  get Phys(data[n=2+2000]=f7043000)
AtapiVirtToPhysAddr_: f7043000 -> 00000000:34013000
  ph data[1]=0:34011000 (2fff)
  get Phys(data[n=2+3000]=f7044000)
AtapiVirtToPhysAddr_: f7044000 -> 00000000:34014000
  ph data[1]=0:34011000 (3fff)
  get Phys(data[n=2+4000]=f7045000)
AtapiVirtToPhysAddr_: f7045000 -> 00000000:34015000
  ph data[1]=0:34011000 (4fff)
  get Phys(data[n=2+5000]=f7046000)
AtapiVirtToPhysAddr_: f7046000 -> 00000000:34016000
  ph data[1]=0:34011000 (5fff)
  get Phys(data[n=2+6000]=f7047000)
AtapiVirtToPhysAddr_: f7047000 -> 00000000:34017000
  ph data[1]=0:34011000 (6fff)
  get Phys(data[n=2+7000]=f7048000)
AtapiVirtToPhysAddr_: f7048000 -> 00000000:34020000
  ph data[2]=0:34020000 (fff)
  get Phys(data[n=3+1000]=f7049000)
AtapiVirtToPhysAddr_: f7049000 -> 00000000:34019000
  ph data[3]=0:34019000 (fff)
  get Phys(data[n=4+1000]=f704a000)
AtapiVirtToPhysAddr_: f704a000 -> 00000000:3401a000
  ph data[3]=0:34019000 (1fff)
  get Phys(data[n=4+2000]=f704b000)
AtapiVirtToPhysAddr_: f704b000 -> 00000000:3401b000
  ph data[3]=0:34019000 (2fff)
  get Phys(data[n=4+3000]=f704c000)
AtapiVirtToPhysAddr_: f704c000 -> 00000000:3401c000
  ph data[3]=0:34019000 (3fff)
  get Phys(data[n=4+4000]=f704d000)
AtapiVirtToPhysAddr_: f704d000 -> 00000000:3401d000
  ph data[3]=0:34019000 (4fff)
  get Phys(data[n=4+5000]=f704e000)
AtapiVirtToPhysAddr_: f704e000 -> 00000000:3401e000
  ph data[3]=0:34019000 (5fff)
  get Phys(data[n=4+6000]=f704f000)
AtapiVirtToPhysAddr_: f704f000 -> 00000000:3401f000
  set TERM
  ph data[3]=0:34019000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff210
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39002240, OrigWordsRequested 0x5000, DevSize 0x50
IdeReadWrite (REQ): Starting sector is 39002240, Number of WORDS 0x5000, DevSize 0x50
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7050000, count a000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:34028000
  ph data[0]=0:34028000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:34021000
  ph data[1]=0:34021000 (fff)
  get Phys(data[n=2+1000]=f7052000)
AtapiVirtToPhysAddr_: f7052000 -> 00000000:34022000
  ph data[1]=0:34021000 (1fff)
  get Phys(data[n=2+2000]=f7053000)
AtapiVirtToPhysAddr_: f7053000 -> 00000000:34023000
  ph data[1]=0:34021000 (2fff)
  get Phys(data[n=2+3000]=f7054000)
AtapiVirtToPhysAddr_: f7054000 -> 00000000:34024000
  ph data[1]=0:34021000 (3fff)
  get Phys(data[n=2+4000]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:34025000
  ph data[1]=0:34021000 (4fff)
  get Phys(data[n=2+5000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:34026000
  ph data[1]=0:34021000 (5fff)
  get Phys(data[n=2+6000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:34027000
  ph data[1]=0:34021000 (6fff)
  get Phys(data[n=2+7000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:34030000
  ph data[2]=0:34030000 (fff)
  get Phys(data[n=3+1000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:34029000
  set TERM
  ph data[3]=0:34029000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff210
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 395e8700, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 395e8700, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f705a000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:3402a000
  ph data[0]=0:3402a000 (fff)
  get Phys(data[n=1+1000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:3402b000
  ph data[0]=0:3402a000 (1fff)
  get Phys(data[n=1+2000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:3402c000
  ph data[0]=0:3402a000 (2fff)
  get Phys(data[n=1+3000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:3402d000
  ph data[0]=0:3402a000 (3fff)
  get Phys(data[n=1+4000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:3402e000
  ph data[0]=0:3402a000 (4fff)
  get Phys(data[n=1+5000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:3402f000
  ph data[0]=0:3402a000 (5fff)
  get Phys(data[n=1+6000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:34038000
  ph data[1]=0:34038000 (fff)
  get Phys(data[n=2+1000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:34031000
  ph data[2]=0:34031000 (fff)
  get Phys(data[n=3+1000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:34032000
  ph data[2]=0:34031000 (1fff)
  get Phys(data[n=3+2000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:34033000
  ph data[2]=0:34031000 (2fff)
  get Phys(data[n=3+3000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:34034000
  ph data[2]=0:34031000 (3fff)
  get Phys(data[n=3+4000]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:34035000
  ph data[2]=0:34031000 (4fff)
  get Phys(data[n=3+5000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:34036000
  ph data[2]=0:34031000 (5fff)
  get Phys(data[n=3+6000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:34037000
  ph data[2]=0:34031000 (6fff)
  get Phys(data[n=3+7000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:34040000
  ph data[3]=0:34040000 (fff)
  get Phys(data[n=4+1000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:34039000
  set TERM
  ph data[4]=0:34039000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff114
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390021c0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x4, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff210
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 395e8780, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 395e8780, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f706a000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:3403a000
  ph data[0]=0:3403a000 (fff)
  get Phys(data[n=1+1000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:3403b000
  set TERM
  ph data[0]=0:3403a000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f53448, CDB 0xb5f53478, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=4
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff260
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 395e8e70, OrigWordsRequested 0x2000, DevSize 0x20
IdeReadWrite (REQ): Starting sector is 395e8e70, Number of WORDS 0x2000, DevSize 0x20
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f706c000, count 4000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:3403c000
  ph data[0]=0:3403c000 (fff)
  get Phys(data[n=1+1000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:3403d000
  ph data[0]=0:3403c000 (1fff)
  get Phys(data[n=1+2000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:3403e000
  ph data[0]=0:3403c000 (2fff)
  get Phys(data[n=1+3000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:3403f000
  set TERM
  ph data[0]=0:3403c000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 5 request(s)!
AtapiStartIo: next Srb b5f53448
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=4
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002240, Count 0x50(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x4, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 5000, WordsLeft 5000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered a000, full size a000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x395e8700, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x5, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x395e8780, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb5f53448
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f53448, CDB 0xb5f53478, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801988
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x395e8e70, Count 0x20(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f53448
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 2000, WordsLeft 2000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 4000, full size 4000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f53448, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f53448
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff210
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 395e8e90, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 395e8e90, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f705c000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:31a30000
  ph data[0]=0:31a30000 (fff)
  get Phys(data[n=1+1000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:31a31000
  ph data[0]=0:31a30000 (1fff)
  get Phys(data[n=1+2000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:31a32000
  ph data[0]=0:31a30000 (2fff)
  get Phys(data[n=1+3000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:31a33000
  ph data[0]=0:31a30000 (3fff)
  get Phys(data[n=1+4000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:31a34000
  ph data[0]=0:31a30000 (4fff)
  get Phys(data[n=1+5000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:31a35000
  ph data[0]=0:31a30000 (5fff)
  get Phys(data[n=1+6000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:31a36000
  ph data[0]=0:31a30000 (6fff)
  get Phys(data[n=1+7000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:31a37000
  ph data[0]=0:31a30000 (7fff)
  get Phys(data[n=1+8000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:31a38000
  ph data[0]=0:31a30000 (8fff)
  get Phys(data[n=1+9000]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:31a39000
  ph data[0]=0:31a30000 (9fff)
  get Phys(data[n=1+a000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:31a3a000
  ph data[0]=0:31a30000 (afff)
  get Phys(data[n=1+b000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:31a3b000
  ph data[0]=0:31a30000 (bfff)
  get Phys(data[n=1+c000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:31a3c000
  ph data[0]=0:31a30000 (cfff)
  get Phys(data[n=1+d000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:31a3d000
  ph data[0]=0:31a30000 (dfff)
  get Phys(data[n=1+e000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:31a3e000
  ph data[0]=0:31a30000 (efff)
  get Phys(data[n=1+f000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:31a3f000
  set TERM
  ph data[0]=0:31a30000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x395e8e90, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff210
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 395e8f10, OrigWordsRequested 0x2000, DevSize 0x20
IdeReadWrite (REQ): Starting sector is 395e8f10, Number of WORDS 0x2000, DevSize 0x20
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f706c000, count 4000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:31a40000
  ph data[0]=0:31a40000 (fff)
  get Phys(data[n=1+1000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:31a41000
  ph data[0]=0:31a40000 (1fff)
  get Phys(data[n=1+2000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:31a42000
  ph data[0]=0:31a40000 (2fff)
  get Phys(data[n=1+3000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:31a43000
  set TERM
  ph data[0]=0:31a40000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x395e8f10, Count 0x20(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 2000, WordsLeft 2000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 4000, full size 4000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff414
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39001d40, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001d40, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7030000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7030000)
AtapiVirtToPhysAddr_: f7030000 -> 00000000:34da8000
  ph data[0]=0:34da8000 (fff)
  get Phys(data[n=1+1000]=f7031000)
AtapiVirtToPhysAddr_: f7031000 -> 00000000:34da1000
  ph data[1]=0:34da1000 (fff)
  get Phys(data[n=2+1000]=f7032000)
AtapiVirtToPhysAddr_: f7032000 -> 00000000:34da2000
  ph data[1]=0:34da1000 (1fff)
  get Phys(data[n=2+2000]=f7033000)
AtapiVirtToPhysAddr_: f7033000 -> 00000000:34da3000
  ph data[1]=0:34da1000 (2fff)
  get Phys(data[n=2+3000]=f7034000)
AtapiVirtToPhysAddr_: f7034000 -> 00000000:34da4000
  ph data[1]=0:34da1000 (3fff)
  get Phys(data[n=2+4000]=f7035000)
AtapiVirtToPhysAddr_: f7035000 -> 00000000:34da5000
  ph data[1]=0:34da1000 (4fff)
  get Phys(data[n=2+5000]=f7036000)
AtapiVirtToPhysAddr_: f7036000 -> 00000000:34da6000
  ph data[1]=0:34da1000 (5fff)
  get Phys(data[n=2+6000]=f7037000)
AtapiVirtToPhysAddr_: f7037000 -> 00000000:34da7000
  ph data[1]=0:34da1000 (6fff)
  get Phys(data[n=2+7000]=f7038000)
AtapiVirtToPhysAddr_: f7038000 -> 00000000:34db0000
  ph data[2]=0:34db0000 (fff)
  get Phys(data[n=3+1000]=f7039000)
AtapiVirtToPhysAddr_: f7039000 -> 00000000:34da9000
  ph data[3]=0:34da9000 (fff)
  get Phys(data[n=4+1000]=f703a000)
AtapiVirtToPhysAddr_: f703a000 -> 00000000:34daa000
  ph data[3]=0:34da9000 (1fff)
  get Phys(data[n=4+2000]=f703b000)
AtapiVirtToPhysAddr_: f703b000 -> 00000000:34dab000
  ph data[3]=0:34da9000 (2fff)
  get Phys(data[n=4+3000]=f703c000)
AtapiVirtToPhysAddr_: f703c000 -> 00000000:34dac000
  ph data[3]=0:34da9000 (3fff)
  get Phys(data[n=4+4000]=f703d000)
AtapiVirtToPhysAddr_: f703d000 -> 00000000:34dad000
  ph data[3]=0:34da9000 (4fff)
  get Phys(data[n=4+5000]=f703e000)
AtapiVirtToPhysAddr_: f703e000 -> 00000000:34dae000
  ph data[3]=0:34da9000 (5fff)
  get Phys(data[n=4+6000]=f703f000)
AtapiVirtToPhysAddr_: f703f000 -> 00000000:34daf000
  set TERM
  ph data[3]=0:34da9000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001d40, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff414
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39001dc0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001dc0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7040000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7040000)
AtapiVirtToPhysAddr_: f7040000 -> 00000000:34db8000
  ph data[0]=0:34db8000 (fff)
  get Phys(data[n=1+1000]=f7041000)
AtapiVirtToPhysAddr_: f7041000 -> 00000000:34db1000
  ph data[1]=0:34db1000 (fff)
  get Phys(data[n=2+1000]=f7042000)
AtapiVirtToPhysAddr_: f7042000 -> 00000000:34db2000
  ph data[1]=0:34db1000 (1fff)
  get Phys(data[n=2+2000]=f7043000)
AtapiVirtToPhysAddr_: f7043000 -> 00000000:34db3000
  ph data[1]=0:34db1000 (2fff)
  get Phys(data[n=2+3000]=f7044000)
AtapiVirtToPhysAddr_: f7044000 -> 00000000:34db4000
  ph data[1]=0:34db1000 (3fff)
  get Phys(data[n=2+4000]=f7045000)
AtapiVirtToPhysAddr_: f7045000 -> 00000000:34db5000
  ph data[1]=0:34db1000 (4fff)
  get Phys(data[n=2+5000]=f7046000)
AtapiVirtToPhysAddr_: f7046000 -> 00000000:34db6000
  ph data[1]=0:34db1000 (5fff)
  get Phys(data[n=2+6000]=f7047000)
AtapiVirtToPhysAddr_: f7047000 -> 00000000:34db7000
  ph data[1]=0:34db1000 (6fff)
  get Phys(data[n=2+7000]=f7048000)
AtapiVirtToPhysAddr_: f7048000 -> 00000000:34dc0000
  ph data[2]=0:34dc0000 (fff)
  get Phys(data[n=3+1000]=f7049000)
AtapiVirtToPhysAddr_: f7049000 -> 00000000:34db9000
  ph data[3]=0:34db9000 (fff)
  get Phys(data[n=4+1000]=f704a000)
AtapiVirtToPhysAddr_: f704a000 -> 00000000:34dba000
  ph data[3]=0:34db9000 (1fff)
  get Phys(data[n=4+2000]=f704b000)
AtapiVirtToPhysAddr_: f704b000 -> 00000000:34dbb000
  ph data[3]=0:34db9000 (2fff)
  get Phys(data[n=4+3000]=f704c000)
AtapiVirtToPhysAddr_: f704c000 -> 00000000:34dbc000
  ph data[3]=0:34db9000 (3fff)
  get Phys(data[n=4+4000]=f704d000)
AtapiVirtToPhysAddr_: f704d000 -> 00000000:34dbd000
  ph data[3]=0:34db9000 (4fff)
  get Phys(data[n=4+5000]=f704e000)
AtapiVirtToPhysAddr_: f704e000 -> 00000000:34dbe000
  ph data[3]=0:34db9000 (5fff)
  get Phys(data[n=4+6000]=f704f000)
AtapiVirtToPhysAddr_: f704f000 -> 00000000:34dbf000
  set TERM
  ph data[3]=0:34db9000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff414
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39001e40, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001e40, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7050000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:34dc8000
  ph data[0]=0:34dc8000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:34dc1000
  ph data[1]=0:34dc1000 (fff)
  get Phys(data[n=2+1000]=f7052000)
AtapiVirtToPhysAddr_: f7052000 -> 00000000:34dc2000
  ph data[1]=0:34dc1000 (1fff)
  get Phys(data[n=2+2000]=f7053000)
AtapiVirtToPhysAddr_: f7053000 -> 00000000:34dc3000
  ph data[1]=0:34dc1000 (2fff)
  get Phys(data[n=2+3000]=f7054000)
AtapiVirtToPhysAddr_: f7054000 -> 00000000:34dc4000
  ph data[1]=0:34dc1000 (3fff)
  get Phys(data[n=2+4000]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:34dc5000
  ph data[1]=0:34dc1000 (4fff)
  get Phys(data[n=2+5000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:34dc6000
  ph data[1]=0:34dc1000 (5fff)
  get Phys(data[n=2+6000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:34dc7000
  ph data[1]=0:34dc1000 (6fff)
  get Phys(data[n=2+7000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:34dd0000
  ph data[2]=0:34dd0000 (fff)
  get Phys(data[n=3+1000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:34dc9000
  ph data[3]=0:34dc9000 (fff)
  get Phys(data[n=4+1000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:34dca000
  ph data[3]=0:34dc9000 (1fff)
  get Phys(data[n=4+2000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:34dcb000
  ph data[3]=0:34dc9000 (2fff)
  get Phys(data[n=4+3000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:34dcc000
  ph data[3]=0:34dc9000 (3fff)
  get Phys(data[n=4+4000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:34dcd000
  ph data[3]=0:34dc9000 (4fff)
  get Phys(data[n=4+5000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:34dce000
  ph data[3]=0:34dc9000 (5fff)
  get Phys(data[n=4+6000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:34dcf000
  set TERM
  ph data[3]=0:34dc9000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff2e8
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001dc0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x4, flags 0x45, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff414
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39001ec0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001ec0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7060000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:34dd8000
  ph data[0]=0:34dd8000 (fff)
  get Phys(data[n=1+1000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:34dd1000
  ph data[1]=0:34dd1000 (fff)
  get Phys(data[n=2+1000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:34dd2000
  ph data[1]=0:34dd1000 (1fff)
  get Phys(data[n=2+2000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:34dd3000
  ph data[1]=0:34dd1000 (2fff)
  get Phys(data[n=2+3000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:34dd4000
  ph data[1]=0:34dd1000 (3fff)
  get Phys(data[n=2+4000]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:34dd5000
  ph data[1]=0:34dd1000 (4fff)
  get Phys(data[n=2+5000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:34dd6000
  ph data[1]=0:34dd1000 (5fff)
  get Phys(data[n=2+6000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:34dd7000
  ph data[1]=0:34dd1000 (6fff)
  get Phys(data[n=2+7000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:34de0000
  ph data[2]=0:34de0000 (fff)
  get Phys(data[n=3+1000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:34dd9000
  ph data[3]=0:34dd9000 (fff)
  get Phys(data[n=4+1000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:34dda000
  ph data[3]=0:34dd9000 (1fff)
  get Phys(data[n=4+2000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:34ddb000
  ph data[3]=0:34dd9000 (2fff)
  get Phys(data[n=4+3000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:34ddc000
  ph data[3]=0:34dd9000 (3fff)
  get Phys(data[n=4+4000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:34ddd000
  ph data[3]=0:34dd9000 (4fff)
  get Phys(data[n=4+5000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:34dde000
  ph data[3]=0:34dd9000 (5fff)
  get Phys(data[n=4+6000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:34ddf000
  set TERM
  ph data[3]=0:34dd9000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff2e8
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001e40, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x45, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001ec0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff414
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39001f40, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001f40, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7030000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7030000)
AtapiVirtToPhysAddr_: f7030000 -> 00000000:34488000
  ph data[0]=0:34488000 (fff)
  get Phys(data[n=1+1000]=f7031000)
AtapiVirtToPhysAddr_: f7031000 -> 00000000:34489000
  ph data[0]=0:34488000 (1fff)
  get Phys(data[n=1+2000]=f7032000)
AtapiVirtToPhysAddr_: f7032000 -> 00000000:3448a000
  ph data[0]=0:34488000 (2fff)
  get Phys(data[n=1+3000]=f7033000)
AtapiVirtToPhysAddr_: f7033000 -> 00000000:3448b000
  ph data[0]=0:34488000 (3fff)
  get Phys(data[n=1+4000]=f7034000)
AtapiVirtToPhysAddr_: f7034000 -> 00000000:3448c000
  ph data[0]=0:34488000 (4fff)
  get Phys(data[n=1+5000]=f7035000)
AtapiVirtToPhysAddr_: f7035000 -> 00000000:34485000
  ph data[1]=0:34485000 (fff)
  get Phys(data[n=2+1000]=f7036000)
AtapiVirtToPhysAddr_: f7036000 -> 00000000:34486000
  ph data[1]=0:34485000 (1fff)
  get Phys(data[n=2+2000]=f7037000)
AtapiVirtToPhysAddr_: f7037000 -> 00000000:34487000
  ph data[1]=0:34485000 (2fff)
  get Phys(data[n=2+3000]=f7038000)
AtapiVirtToPhysAddr_: f7038000 -> 00000000:34490000
  ph data[2]=0:34490000 (fff)
  get Phys(data[n=3+1000]=f7039000)
AtapiVirtToPhysAddr_: f7039000 -> 00000000:34491000
  ph data[2]=0:34490000 (1fff)
  get Phys(data[n=3+2000]=f703a000)
AtapiVirtToPhysAddr_: f703a000 -> 00000000:34492000
  ph data[2]=0:34490000 (2fff)
  get Phys(data[n=3+3000]=f703b000)
AtapiVirtToPhysAddr_: f703b000 -> 00000000:34493000
  ph data[2]=0:34490000 (3fff)
  get Phys(data[n=3+4000]=f703c000)
AtapiVirtToPhysAddr_: f703c000 -> 00000000:34494000
  ph data[2]=0:34490000 (4fff)
  get Phys(data[n=3+5000]=f703d000)
AtapiVirtToPhysAddr_: f703d000 -> 00000000:3448d000
  ph data[3]=0:3448d000 (fff)
  get Phys(data[n=4+1000]=f703e000)
AtapiVirtToPhysAddr_: f703e000 -> 00000000:3448e000
  ph data[3]=0:3448d000 (1fff)
  get Phys(data[n=4+2000]=f703f000)
AtapiVirtToPhysAddr_: f703f000 -> 00000000:3448f000
  set TERM
  ph data[3]=0:3448d000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001f40, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff414
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39001fc0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001fc0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7040000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7040000)
AtapiVirtToPhysAddr_: f7040000 -> 00000000:34498000
  ph data[0]=0:34498000 (fff)
  get Phys(data[n=1+1000]=f7041000)
AtapiVirtToPhysAddr_: f7041000 -> 00000000:34499000
  ph data[0]=0:34498000 (1fff)
  get Phys(data[n=1+2000]=f7042000)
AtapiVirtToPhysAddr_: f7042000 -> 00000000:3449a000
  ph data[0]=0:34498000 (2fff)
  get Phys(data[n=1+3000]=f7043000)
AtapiVirtToPhysAddr_: f7043000 -> 00000000:3449b000
  ph data[0]=0:34498000 (3fff)
  get Phys(data[n=1+4000]=f7044000)
AtapiVirtToPhysAddr_: f7044000 -> 00000000:3449c000
  ph data[0]=0:34498000 (4fff)
  get Phys(data[n=1+5000]=f7045000)
AtapiVirtToPhysAddr_: f7045000 -> 00000000:34495000
  ph data[1]=0:34495000 (fff)
  get Phys(data[n=2+1000]=f7046000)
AtapiVirtToPhysAddr_: f7046000 -> 00000000:34496000
  ph data[1]=0:34495000 (1fff)
  get Phys(data[n=2+2000]=f7047000)
AtapiVirtToPhysAddr_: f7047000 -> 00000000:34497000
  ph data[1]=0:34495000 (2fff)
  get Phys(data[n=2+3000]=f7048000)
AtapiVirtToPhysAddr_: f7048000 -> 00000000:344a0000
  ph data[2]=0:344a0000 (fff)
  get Phys(data[n=3+1000]=f7049000)
AtapiVirtToPhysAddr_: f7049000 -> 00000000:344a1000
  ph data[2]=0:344a0000 (1fff)
  get Phys(data[n=3+2000]=f704a000)
AtapiVirtToPhysAddr_: f704a000 -> 00000000:344a2000
  ph data[2]=0:344a0000 (2fff)
  get Phys(data[n=3+3000]=f704b000)
AtapiVirtToPhysAddr_: f704b000 -> 00000000:344a3000
  ph data[2]=0:344a0000 (3fff)
  get Phys(data[n=3+4000]=f704c000)
AtapiVirtToPhysAddr_: f704c000 -> 00000000:344a4000
  ph data[2]=0:344a0000 (4fff)
  get Phys(data[n=3+5000]=f704d000)
AtapiVirtToPhysAddr_: f704d000 -> 00000000:3449d000
  ph data[3]=0:3449d000 (fff)
  get Phys(data[n=4+1000]=f704e000)
AtapiVirtToPhysAddr_: f704e000 -> 00000000:3449e000
  ph data[3]=0:3449d000 (1fff)
  get Phys(data[n=4+2000]=f704f000)
AtapiVirtToPhysAddr_: f704f000 -> 00000000:3449f000
  set TERM
  ph data[3]=0:3449d000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff414
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39002040, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002040, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7050000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:344a8000
  ph data[0]=0:344a8000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:344a9000
  ph data[0]=0:344a8000 (1fff)
  get Phys(data[n=1+2000]=f7052000)
AtapiVirtToPhysAddr_: f7052000 -> 00000000:344aa000
  ph data[0]=0:344a8000 (2fff)
  get Phys(data[n=1+3000]=f7053000)
AtapiVirtToPhysAddr_: f7053000 -> 00000000:344ab000
  ph data[0]=0:344a8000 (3fff)
  get Phys(data[n=1+4000]=f7054000)
AtapiVirtToPhysAddr_: f7054000 -> 00000000:344ac000
  ph data[0]=0:344a8000 (4fff)
  get Phys(data[n=1+5000]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:344a5000
  ph data[1]=0:344a5000 (fff)
  get Phys(data[n=2+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:344a6000
  ph data[1]=0:344a5000 (1fff)
  get Phys(data[n=2+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:344a7000
  ph data[1]=0:344a5000 (2fff)
  get Phys(data[n=2+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:344b0000
  ph data[2]=0:344b0000 (fff)
  get Phys(data[n=3+1000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:344b1000
  ph data[2]=0:344b0000 (1fff)
  get Phys(data[n=3+2000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:344b2000
  ph data[2]=0:344b0000 (2fff)
  get Phys(data[n=3+3000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:344b3000
  ph data[2]=0:344b0000 (3fff)
  get Phys(data[n=3+4000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:344b4000
  ph data[2]=0:344b0000 (4fff)
  get Phys(data[n=3+5000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:344ad000
  ph data[3]=0:344ad000 (fff)
  get Phys(data[n=4+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:344ae000
  ph data[3]=0:344ad000 (1fff)
  get Phys(data[n=4+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:344af000
  set TERM
  ph data[3]=0:344ad000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff298
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001fc0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x45, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff414
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 390020c0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390020c0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7060000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:344b8000
  ph data[0]=0:344b8000 (fff)
  get Phys(data[n=1+1000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:344b9000
  ph data[0]=0:344b8000 (1fff)
  get Phys(data[n=1+2000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:344ba000
  ph data[0]=0:344b8000 (2fff)
  get Phys(data[n=1+3000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:344bb000
  ph data[0]=0:344b8000 (3fff)
  get Phys(data[n=1+4000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:344bc000
  ph data[0]=0:344b8000 (4fff)
  get Phys(data[n=1+5000]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:344b5000
  ph data[1]=0:344b5000 (fff)
  get Phys(data[n=2+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:344b6000
  ph data[1]=0:344b5000 (1fff)
  get Phys(data[n=2+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:344b7000
  ph data[1]=0:344b5000 (2fff)
  get Phys(data[n=2+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:344c0000
  ph data[2]=0:344c0000 (fff)
  get Phys(data[n=3+1000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:344c1000
  ph data[2]=0:344c0000 (1fff)
  get Phys(data[n=3+2000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:344c2000
  ph data[2]=0:344c0000 (2fff)
  get Phys(data[n=3+3000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:344c3000
  ph data[2]=0:344c0000 (3fff)
  get Phys(data[n=3+4000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:344c4000
  ph data[2]=0:344c0000 (4fff)
  get Phys(data[n=3+5000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:344bd000
  ph data[3]=0:344bd000 (fff)
  get Phys(data[n=4+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:344be000
  ph data[3]=0:344bd000 (1fff)
  get Phys(data[n=4+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:344bf000
  set TERM
  ph data[3]=0:344bd000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff2e8
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002040, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x4, flags 0x45, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390020c0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff414
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39002140, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39002140, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7030000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7030000)
AtapiVirtToPhysAddr_: f7030000 -> 00000000:34008000
  ph data[0]=0:34008000 (fff)
  get Phys(data[n=1+1000]=f7031000)
AtapiVirtToPhysAddr_: f7031000 -> 00000000:34001000
  ph data[1]=0:34001000 (fff)
  get Phys(data[n=2+1000]=f7032000)
AtapiVirtToPhysAddr_: f7032000 -> 00000000:34002000
  ph data[1]=0:34001000 (1fff)
  get Phys(data[n=2+2000]=f7033000)
AtapiVirtToPhysAddr_: f7033000 -> 00000000:34003000
  ph data[1]=0:34001000 (2fff)
  get Phys(data[n=2+3000]=f7034000)
AtapiVirtToPhysAddr_: f7034000 -> 00000000:34004000
  ph data[1]=0:34001000 (3fff)
  get Phys(data[n=2+4000]=f7035000)
AtapiVirtToPhysAddr_: f7035000 -> 00000000:34005000
  ph data[1]=0:34001000 (4fff)
  get Phys(data[n=2+5000]=f7036000)
AtapiVirtToPhysAddr_: f7036000 -> 00000000:34006000
  ph data[1]=0:34001000 (5fff)
  get Phys(data[n=2+6000]=f7037000)
AtapiVirtToPhysAddr_: f7037000 -> 00000000:34007000
  ph data[1]=0:34001000 (6fff)
  get Phys(data[n=2+7000]=f7038000)
AtapiVirtToPhysAddr_: f7038000 -> 00000000:34010000
  ph data[2]=0:34010000 (fff)
  get Phys(data[n=3+1000]=f7039000)
AtapiVirtToPhysAddr_: f7039000 -> 00000000:34009000
  ph data[3]=0:34009000 (fff)
  get Phys(data[n=4+1000]=f703a000)
AtapiVirtToPhysAddr_: f703a000 -> 00000000:3400a000
  ph data[3]=0:34009000 (1fff)
  get Phys(data[n=4+2000]=f703b000)
AtapiVirtToPhysAddr_: f703b000 -> 00000000:3400b000
  ph data[3]=0:34009000 (2fff)
  get Phys(data[n=4+3000]=f703c000)
AtapiVirtToPhysAddr_: f703c000 -> 00000000:3400c000
  ph data[3]=0:34009000 (3fff)
  get Phys(data[n=4+4000]=f703d000)
AtapiVirtToPhysAddr_: f703d000 -> 00000000:3400d000
  ph data[3]=0:34009000 (4fff)
  get Phys(data[n=4+5000]=f703e000)
AtapiVirtToPhysAddr_: f703e000 -> 00000000:3400e000
  ph data[3]=0:34009000 (5fff)
  get Phys(data[n=4+6000]=f703f000)
AtapiVirtToPhysAddr_: f703f000 -> 00000000:3400f000
  set TERM
  ph data[3]=0:34009000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002140, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff414
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 390021c0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390021c0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7040000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7040000)
AtapiVirtToPhysAddr_: f7040000 -> 00000000:34018000
  ph data[0]=0:34018000 (fff)
  get Phys(data[n=1+1000]=f7041000)
AtapiVirtToPhysAddr_: f7041000 -> 00000000:34011000
  ph data[1]=0:34011000 (fff)
  get Phys(data[n=2+1000]=f7042000)
AtapiVirtToPhysAddr_: f7042000 -> 00000000:34012000
  ph data[1]=0:34011000 (1fff)
  get Phys(data[n=2+2000]=f7043000)
AtapiVirtToPhysAddr_: f7043000 -> 00000000:34013000
  ph data[1]=0:34011000 (2fff)
  get Phys(data[n=2+3000]=f7044000)
AtapiVirtToPhysAddr_: f7044000 -> 00000000:34014000
  ph data[1]=0:34011000 (3fff)
  get Phys(data[n=2+4000]=f7045000)
AtapiVirtToPhysAddr_: f7045000 -> 00000000:34015000
  ph data[1]=0:34011000 (4fff)
  get Phys(data[n=2+5000]=f7046000)
AtapiVirtToPhysAddr_: f7046000 -> 00000000:34016000
  ph data[1]=0:34011000 (5fff)
  get Phys(data[n=2+6000]=f7047000)
AtapiVirtToPhysAddr_: f7047000 -> 00000000:34017000
  ph data[1]=0:34011000 (6fff)
  get Phys(data[n=2+7000]=f7048000)
AtapiVirtToPhysAddr_: f7048000 -> 00000000:34020000
  ph data[2]=0:34020000 (fff)
  get Phys(data[n=3+1000]=f7049000)
AtapiVirtToPhysAddr_: f7049000 -> 00000000:34019000
  ph data[3]=0:34019000 (fff)
  get Phys(data[n=4+1000]=f704a000)
AtapiVirtToPhysAddr_: f704a000 -> 00000000:3401a000
  ph data[3]=0:34019000 (1fff)
  get Phys(data[n=4+2000]=f704b000)
AtapiVirtToPhysAddr_: f704b000 -> 00000000:3401b000
  ph data[3]=0:34019000 (2fff)
  get Phys(data[n=4+3000]=f704c000)
AtapiVirtToPhysAddr_: f704c000 -> 00000000:3401c000
  ph data[3]=0:34019000 (3fff)
  get Phys(data[n=4+4000]=f704d000)
AtapiVirtToPhysAddr_: f704d000 -> 00000000:3401d000
  ph data[3]=0:34019000 (4fff)
  get Phys(data[n=4+5000]=f704e000)
AtapiVirtToPhysAddr_: f704e000 -> 00000000:3401e000
  ph data[3]=0:34019000 (5fff)
  get Phys(data[n=4+6000]=f704f000)
AtapiVirtToPhysAddr_: f704f000 -> 00000000:3401f000
  set TERM
  ph data[3]=0:34019000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff414
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39002240, OrigWordsRequested 0x5000, DevSize 0x50
IdeReadWrite (REQ): Starting sector is 39002240, Number of WORDS 0x5000, DevSize 0x50
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7050000, count a000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:34028000
  ph data[0]=0:34028000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:34021000
  ph data[1]=0:34021000 (fff)
  get Phys(data[n=2+1000]=f7052000)
AtapiVirtToPhysAddr_: f7052000 -> 00000000:34022000
  ph data[1]=0:34021000 (1fff)
  get Phys(data[n=2+2000]=f7053000)
AtapiVirtToPhysAddr_: f7053000 -> 00000000:34023000
  ph data[1]=0:34021000 (2fff)
  get Phys(data[n=2+3000]=f7054000)
AtapiVirtToPhysAddr_: f7054000 -> 00000000:34024000
  ph data[1]=0:34021000 (3fff)
  get Phys(data[n=2+4000]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:34025000
  ph data[1]=0:34021000 (4fff)
  get Phys(data[n=2+5000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:34026000
  ph data[1]=0:34021000 (5fff)
  get Phys(data[n=2+6000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:34027000
  ph data[1]=0:34021000 (6fff)
  get Phys(data[n=2+7000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:34030000
  ph data[2]=0:34030000 (fff)
  get Phys(data[n=3+1000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:34029000
  set TERM
  ph data[3]=0:34029000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff2e8
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390021c0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x4, flags 0x45, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff414
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 395e8700, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 395e8700, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f705a000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:3402a000
  ph data[0]=0:3402a000 (fff)
  get Phys(data[n=1+1000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:3402b000
  ph data[0]=0:3402a000 (1fff)
  get Phys(data[n=1+2000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:3402c000
  ph data[0]=0:3402a000 (2fff)
  get Phys(data[n=1+3000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:3402d000
  ph data[0]=0:3402a000 (3fff)
  get Phys(data[n=1+4000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:3402e000
  ph data[0]=0:3402a000 (4fff)
  get Phys(data[n=1+5000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:3402f000
  ph data[0]=0:3402a000 (5fff)
  get Phys(data[n=1+6000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:34038000
  ph data[1]=0:34038000 (fff)
  get Phys(data[n=2+1000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:34031000
  ph data[2]=0:34031000 (fff)
  get Phys(data[n=3+1000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:34032000
  ph data[2]=0:34031000 (1fff)
  get Phys(data[n=3+2000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:34033000
  ph data[2]=0:34031000 (2fff)
  get Phys(data[n=3+3000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:34034000
  ph data[2]=0:34031000 (3fff)
  get Phys(data[n=3+4000]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:34035000
  ph data[2]=0:34031000 (4fff)
  get Phys(data[n=3+5000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:34036000
  ph data[2]=0:34031000 (5fff)
  get Phys(data[n=3+6000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:34037000
  ph data[2]=0:34031000 (6fff)
  get Phys(data[n=3+7000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:34040000
  ph data[3]=0:34040000 (fff)
  get Phys(data[n=4+1000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:34039000
  set TERM
  ph data[4]=0:34039000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff2e8
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39002240, Count 0x50(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x45, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff414
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 395e8780, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 395e8780, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f706a000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:3403a000
  ph data[0]=0:3403a000 (fff)
  get Phys(data[n=1+1000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:3403b000
  set TERM
  ph data[0]=0:3403a000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 5000, WordsLeft 5000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered a000, full size a000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff2e8
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x395e8700, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x5, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff464
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 395e8e70, OrigWordsRequested 0x2000, DevSize 0x20
IdeReadWrite (REQ): Starting sector is 395e8e70, Number of WORDS 0x2000, DevSize 0x20
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f706c000, count 4000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:3403c000
  ph data[0]=0:3403c000 (fff)
  get Phys(data[n=1+1000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:3403d000
  ph data[0]=0:3403c000 (1fff)
  get Phys(data[n=1+2000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:3403e000
  ph data[0]=0:3403c000 (2fff)
  get Phys(data[n=1+3000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:3403f000
  set TERM
  ph data[0]=0:3403c000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x395e8780, Count 0x10(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x45, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdbf0
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x395e8e70, Count 0x20(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x45, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 2000, WordsLeft 2000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 4000, full size 4000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff414
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 395e8e90, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 395e8e90, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f705c000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:31a30000
  ph data[0]=0:31a30000 (fff)
  get Phys(data[n=1+1000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:31a31000
  ph data[0]=0:31a30000 (1fff)
  get Phys(data[n=1+2000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:31a32000
  ph data[0]=0:31a30000 (2fff)
  get Phys(data[n=1+3000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:31a33000
  ph data[0]=0:31a30000 (3fff)
  get Phys(data[n=1+4000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:31a34000
  ph data[0]=0:31a30000 (4fff)
  get Phys(data[n=1+5000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:31a35000
  ph data[0]=0:31a30000 (5fff)
  get Phys(data[n=1+6000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:31a36000
  ph data[0]=0:31a30000 (6fff)
  get Phys(data[n=1+7000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:31a37000
  ph data[0]=0:31a30000 (7fff)
  get Phys(data[n=1+8000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:31a38000
  ph data[0]=0:31a30000 (8fff)
  get Phys(data[n=1+9000]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:31a39000
  ph data[0]=0:31a30000 (9fff)
  get Phys(data[n=1+a000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:31a3a000
  ph data[0]=0:31a30000 (afff)
  get Phys(data[n=1+b000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:31a3b000
  ph data[0]=0:31a30000 (bfff)
  get Phys(data[n=1+c000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:31a3c000
  ph data[0]=0:31a30000 (cfff)
  get Phys(data[n=1+d000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:31a3d000
  ph data[0]=0:31a30000 (dfff)
  get Phys(data[n=1+e000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:31a3e000
  ph data[0]=0:31a30000 (efff)
  get Phys(data[n=1+f000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:31a3f000
  set TERM
  ph data[0]=0:31a30000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x395e8e90, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x45, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff414
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 395e8f10, OrigWordsRequested 0x2000, DevSize 0x20
IdeReadWrite (REQ): Starting sector is 395e8f10, Number of WORDS 0x2000, DevSize 0x20
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f706c000, count 4000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:31a40000
  ph data[0]=0:31a40000 (fff)
  get Phys(data[n=1+1000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:31a41000
  ph data[0]=0:31a40000 (1fff)
  get Phys(data[n=1+2000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:31a42000
  ph data[0]=0:31a40000 (2fff)
  get Phys(data[n=1+3000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:31a43000
  set TERM
  ph data[0]=0:31a40000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x395e8f10, Count 0x20(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x45, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 2000, WordsLeft 2000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 4000, full size 4000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff414
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39001d40, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001d40, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7030000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7030000)
AtapiVirtToPhysAddr_: f7030000 -> 00000000:34da8000
  ph data[0]=0:34da8000 (fff)
  get Phys(data[n=1+1000]=f7031000)
AtapiVirtToPhysAddr_: f7031000 -> 00000000:34da1000
  ph data[1]=0:34da1000 (fff)
  get Phys(data[n=2+1000]=f7032000)
AtapiVirtToPhysAddr_: f7032000 -> 00000000:34da2000
  ph data[1]=0:34da1000 (1fff)
  get Phys(data[n=2+2000]=f7033000)
AtapiVirtToPhysAddr_: f7033000 -> 00000000:34da3000
  ph data[1]=0:34da1000 (2fff)
  get Phys(data[n=2+3000]=f7034000)
AtapiVirtToPhysAddr_: f7034000 -> 00000000:34da4000
  ph data[1]=0:34da1000 (3fff)
  get Phys(data[n=2+4000]=f7035000)
AtapiVirtToPhysAddr_: f7035000 -> 00000000:34da5000
  ph data[1]=0:34da1000 (4fff)
  get Phys(data[n=2+5000]=f7036000)
AtapiVirtToPhysAddr_: f7036000 -> 00000000:34da6000
  ph data[1]=0:34da1000 (5fff)
  get Phys(data[n=2+6000]=f7037000)
AtapiVirtToPhysAddr_: f7037000 -> 00000000:34da7000
  ph data[1]=0:34da1000 (6fff)
  get Phys(data[n=2+7000]=f7038000)
AtapiVirtToPhysAddr_: f7038000 -> 00000000:34db0000
  ph data[2]=0:34db0000 (fff)
  get Phys(data[n=3+1000]=f7039000)
AtapiVirtToPhysAddr_: f7039000 -> 00000000:34da9000
  ph data[3]=0:34da9000 (fff)
  get Phys(data[n=4+1000]=f703a000)
AtapiVirtToPhysAddr_: f703a000 -> 00000000:34daa000
  ph data[3]=0:34da9000 (1fff)
  get Phys(data[n=4+2000]=f703b000)
AtapiVirtToPhysAddr_: f703b000 -> 00000000:34dab000
  ph data[3]=0:34da9000 (2fff)
  get Phys(data[n=4+3000]=f703c000)
AtapiVirtToPhysAddr_: f703c000 -> 00000000:34dac000
  ph data[3]=0:34da9000 (3fff)
  get Phys(data[n=4+4000]=f703d000)
AtapiVirtToPhysAddr_: f703d000 -> 00000000:34dad000
  ph data[3]=0:34da9000 (4fff)
  get Phys(data[n=4+5000]=f703e000)
AtapiVirtToPhysAddr_: f703e000 -> 00000000:34dae000
  ph data[3]=0:34da9000 (5fff)
  get Phys(data[n=4+6000]=f703f000)
AtapiVirtToPhysAddr_: f703f000 -> 00000000:34daf000
  set TERM
  ph data[3]=0:34da9000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001d40, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x4, flags 0x45, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff414
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39001dc0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001dc0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7040000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7040000)
AtapiVirtToPhysAddr_: f7040000 -> 00000000:34db8000
  ph data[0]=0:34db8000 (fff)
  get Phys(data[n=1+1000]=f7041000)
AtapiVirtToPhysAddr_: f7041000 -> 00000000:34db1000
  ph data[1]=0:34db1000 (fff)
  get Phys(data[n=2+1000]=f7042000)
AtapiVirtToPhysAddr_: f7042000 -> 00000000:34db2000
  ph data[1]=0:34db1000 (1fff)
  get Phys(data[n=2+2000]=f7043000)
AtapiVirtToPhysAddr_: f7043000 -> 00000000:34db3000
  ph data[1]=0:34db1000 (2fff)
  get Phys(data[n=2+3000]=f7044000)
AtapiVirtToPhysAddr_: f7044000 -> 00000000:34db4000
  ph data[1]=0:34db1000 (3fff)
  get Phys(data[n=2+4000]=f7045000)
AtapiVirtToPhysAddr_: f7045000 -> 00000000:34db5000
  ph data[1]=0:34db1000 (4fff)
  get Phys(data[n=2+5000]=f7046000)
AtapiVirtToPhysAddr_: f7046000 -> 00000000:34db6000
  ph data[1]=0:34db1000 (5fff)
  get Phys(data[n=2+6000]=f7047000)
AtapiVirtToPhysAddr_: f7047000 -> 00000000:34db7000
  ph data[1]=0:34db1000 (6fff)
  get Phys(data[n=2+7000]=f7048000)
AtapiVirtToPhysAddr_: f7048000 -> 00000000:34dc0000
  ph data[2]=0:34dc0000 (fff)
  get Phys(data[n=3+1000]=f7049000)
AtapiVirtToPhysAddr_: f7049000 -> 00000000:34db9000
  ph data[3]=0:34db9000 (fff)
  get Phys(data[n=4+1000]=f704a000)
AtapiVirtToPhysAddr_: f704a000 -> 00000000:34dba000
  ph data[3]=0:34db9000 (1fff)
  get Phys(data[n=4+2000]=f704b000)
AtapiVirtToPhysAddr_: f704b000 -> 00000000:34dbb000
  ph data[3]=0:34db9000 (2fff)
  get Phys(data[n=4+3000]=f704c000)
AtapiVirtToPhysAddr_: f704c000 -> 00000000:34dbc000
  ph data[3]=0:34db9000 (3fff)
  get Phys(data[n=4+4000]=f704d000)
AtapiVirtToPhysAddr_: f704d000 -> 00000000:34dbd000
  ph data[3]=0:34db9000 (4fff)
  get Phys(data[n=4+5000]=f704e000)
AtapiVirtToPhysAddr_: f704e000 -> 00000000:34dbe000
  ph data[3]=0:34db9000 (5fff)
  get Phys(data[n=4+6000]=f704f000)
AtapiVirtToPhysAddr_: f704f000 -> 00000000:34dbf000
  set TERM
  ph data[3]=0:34db9000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff414
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39001e40, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001e40, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7050000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:34dc8000
  ph data[0]=0:34dc8000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:34dc1000
  ph data[1]=0:34dc1000 (fff)
  get Phys(data[n=2+1000]=f7052000)
AtapiVirtToPhysAddr_: f7052000 -> 00000000:34dc2000
  ph data[1]=0:34dc1000 (1fff)
  get Phys(data[n=2+2000]=f7053000)
AtapiVirtToPhysAddr_: f7053000 -> 00000000:34dc3000
  ph data[1]=0:34dc1000 (2fff)
  get Phys(data[n=2+3000]=f7054000)
AtapiVirtToPhysAddr_: f7054000 -> 00000000:34dc4000
  ph data[1]=0:34dc1000 (3fff)
  get Phys(data[n=2+4000]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:34dc5000
  ph data[1]=0:34dc1000 (4fff)
  get Phys(data[n=2+5000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:34dc6000
  ph data[1]=0:34dc1000 (5fff)
  get Phys(data[n=2+6000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:34dc7000
  ph data[1]=0:34dc1000 (6fff)
  get Phys(data[n=2+7000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:34dd0000
  ph data[2]=0:34dd0000 (fff)
  get Phys(data[n=3+1000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:34dc9000
  ph data[3]=0:34dc9000 (fff)
  get Phys(data[n=4+1000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:34dca000
  ph data[3]=0:34dc9000 (1fff)
  get Phys(data[n=4+2000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:34dcb000
  ph data[3]=0:34dc9000 (2fff)
  get Phys(data[n=4+3000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:34dcc000
  ph data[3]=0:34dc9000 (3fff)
  get Phys(data[n=4+4000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:34dcd000
  ph data[3]=0:34dc9000 (4fff)
  get Phys(data[n=4+5000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:34dce000
  ph data[3]=0:34dc9000 (5fff)
  get Phys(data[n=4+6000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:34dcf000
  set TERM
  ph data[3]=0:34dc9000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001dc0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x45, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff414
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39001ec0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39001ec0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7060000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:34dd8000
  ph data[0]=0:34dd8000 (fff)
  get Phys(data[n=1+1000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:34dd1000
  ph data[1]=0:34dd1000 (fff)
  get Phys(data[n=2+1000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:34dd2000
  ph data[1]=0:34dd1000 (1fff)
  get Phys(data[n=2+2000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:34dd3000
  ph data[1]=0:34dd1000 (2fff)
  get Phys(data[n=2+3000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:34dd4000
  ph data[1]=0:34dd1000 (3fff)
  get Phys(data[n=2+4000]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:34dd5000
  ph data[1]=0:34dd1000 (4fff)
  get Phys(data[n=2+5000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:34dd6000
  ph data[1]=0:34dd1000 (5fff)
  get Phys(data[n=2+6000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:34dd7000
  ph data[1]=0:34dd1000 (6fff)
  get Phys(data[n=2+7000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:34de0000
  ph data[2]=0:34de0000 (fff)
  get Phys(data[n=3+1000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:34dd9000
  ph data[3]=0:34dd9000 (fff)
  get Phys(data[n=4+1000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:34dda000
  ph data[3]=0:34dd9000 (1fff)
  get Phys(data[n=4+2000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:34ddb000
  ph data[3]=0:34dd9000 (2fff)
  get Phys(data[n=4+3000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:34ddc000
  ph data[3]=0:34dd9000 (3fff)
  get Phys(data[n=4+4000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:34ddd000
  ph data[3]=0:34dd9000 (4fff)
  get Phys(data[n=4+5000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:34dde000
  ph data[3]=0:34dd9000 (5fff)
  get Phys(data[n=4+6000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:34ddf000
  set TERM
  ph data[3]=0:34dd9000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001e40, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39001ec0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x4, flags 0x45, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff1e0
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc2090, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fc2090, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7040000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7040000)
AtapiVirtToPhysAddr_: f7040000 -> 00000000:31848000
  ph data[0]=0:31848000 (fff)
  get Phys(data[n=1+1000]=f7041000)
AtapiVirtToPhysAddr_: f7041000 -> 00000000:31849000
  ph data[0]=0:31848000 (1fff)
  get Phys(data[n=1+2000]=f7042000)
AtapiVirtToPhysAddr_: f7042000 -> 00000000:31842000
  ph data[1]=0:31842000 (fff)
  get Phys(data[n=2+1000]=f7043000)
AtapiVirtToPhysAddr_: f7043000 -> 00000000:31843000
  ph data[1]=0:31842000 (1fff)
  get Phys(data[n=2+2000]=f7044000)
AtapiVirtToPhysAddr_: f7044000 -> 00000000:31844000
  ph data[1]=0:31842000 (2fff)
  get Phys(data[n=2+3000]=f7045000)
AtapiVirtToPhysAddr_: f7045000 -> 00000000:3184d000
  ph data[2]=0:3184d000 (fff)
  get Phys(data[n=3+1000]=f7046000)
AtapiVirtToPhysAddr_: f7046000 -> 00000000:3184e000
  ph data[2]=0:3184d000 (1fff)
  get Phys(data[n=3+2000]=f7047000)
AtapiVirtToPhysAddr_: f7047000 -> 00000000:3184f000
  ph data[2]=0:3184d000 (2fff)
  get Phys(data[n=3+3000]=f7048000)
AtapiVirtToPhysAddr_: f7048000 -> 00000000:31850000
  ph data[2]=0:3184d000 (3fff)
  get Phys(data[n=3+4000]=f7049000)
AtapiVirtToPhysAddr_: f7049000 -> 00000000:31851000
  ph data[2]=0:3184d000 (4fff)
  get Phys(data[n=3+5000]=f704a000)
AtapiVirtToPhysAddr_: f704a000 -> 00000000:3184a000
  ph data[3]=0:3184a000 (fff)
  get Phys(data[n=4+1000]=f704b000)
AtapiVirtToPhysAddr_: f704b000 -> 00000000:3184b000
  ph data[3]=0:3184a000 (1fff)
  get Phys(data[n=4+2000]=f704c000)
AtapiVirtToPhysAddr_: f704c000 -> 00000000:3184c000
  ph data[3]=0:3184a000 (2fff)
  get Phys(data[n=4+3000]=f704d000)
AtapiVirtToPhysAddr_: f704d000 -> 00000000:31855000
  ph data[4]=0:31855000 (fff)
  get Phys(data[n=5+1000]=f704e000)
AtapiVirtToPhysAddr_: f704e000 -> 00000000:31856000
  ph data[4]=0:31855000 (1fff)
  get Phys(data[n=5+2000]=f704f000)
AtapiVirtToPhysAddr_: f704f000 -> 00000000:31857000
  set TERM
  ph data[4]=0:31855000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc2090, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x5, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff1e0
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc2110, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fc2110, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7050000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:31858000
  ph data[0]=0:31858000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:31859000
  ph data[0]=0:31858000 (1fff)
  get Phys(data[n=1+2000]=f7052000)
AtapiVirtToPhysAddr_: f7052000 -> 00000000:31852000
  ph data[1]=0:31852000 (fff)
  get Phys(data[n=2+1000]=f7053000)
AtapiVirtToPhysAddr_: f7053000 -> 00000000:31853000
  ph data[1]=0:31852000 (1fff)
  get Phys(data[n=2+2000]=f7054000)
AtapiVirtToPhysAddr_: f7054000 -> 00000000:31854000
  ph data[1]=0:31852000 (2fff)
  get Phys(data[n=2+3000]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:3185d000
  ph data[2]=0:3185d000 (fff)
  get Phys(data[n=3+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:3185e000
  ph data[2]=0:3185d000 (1fff)
  get Phys(data[n=3+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:3185f000
  ph data[2]=0:3185d000 (2fff)
  get Phys(data[n=3+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:31860000
  ph data[2]=0:3185d000 (3fff)
  get Phys(data[n=3+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:31861000
  ph data[2]=0:3185d000 (4fff)
  get Phys(data[n=3+5000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:3185a000
  ph data[3]=0:3185a000 (fff)
  get Phys(data[n=4+1000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:3185b000
  ph data[3]=0:3185a000 (1fff)
  get Phys(data[n=4+2000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:3185c000
  ph data[3]=0:3185a000 (2fff)
  get Phys(data[n=4+3000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:31865000
  ph data[4]=0:31865000 (fff)
  get Phys(data[n=5+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:31866000
  ph data[4]=0:31865000 (1fff)
  get Phys(data[n=5+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:31867000
  set TERM
  ph data[4]=0:31865000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff1e0
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc2190, OrigWordsRequested 0x7c00, DevSize 0x7c
IdeReadWrite (REQ): Starting sector is 38fc2190, Number of WORDS 0x7c00, DevSize 0x7c
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7060000, count f800, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:31868000
  ph data[0]=0:31868000 (fff)
  get Phys(data[n=1+1000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:31869000
  ph data[0]=0:31868000 (1fff)
  get Phys(data[n=1+2000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:31862000
  ph data[1]=0:31862000 (fff)
  get Phys(data[n=2+1000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:31863000
  ph data[1]=0:31862000 (1fff)
  get Phys(data[n=2+2000]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:31864000
  ph data[1]=0:31862000 (2fff)
  get Phys(data[n=2+3000]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:3186d000
  ph data[2]=0:3186d000 (fff)
  get Phys(data[n=3+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:3186e000
  ph data[2]=0:3186d000 (1fff)
  get Phys(data[n=3+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:3186f000
  ph data[2]=0:3186d000 (2fff)
  get Phys(data[n=3+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:31870000
  ph data[2]=0:3186d000 (3fff)
  get Phys(data[n=3+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:31871000
  ph data[2]=0:3186d000 (4fff)
  get Phys(data[n=3+5000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:3186a000
  ph data[3]=0:3186a000 (fff)
  get Phys(data[n=4+1000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:3186b000
  ph data[3]=0:3186a000 (1fff)
  get Phys(data[n=4+2000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:3186c000
  ph data[3]=0:3186a000 (2fff)
  get Phys(data[n=4+3000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:31875000
  ph data[4]=0:31875000 (fff)
  get Phys(data[n=5+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:31876000
  ph data[4]=0:31875000 (1fff)
  get Phys(data[n=5+2000]=f706f000)
AtapiVirtToPhysAddr_: f706f000 -> 00000000:31877000
  set TERM
  ph data[4]=0:31875000 (27ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc2110, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x5, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc2190, Count 0x7c(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x5, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 7c00, WordsLeft 7c00
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered f800, full size f800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff60c
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc2090, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fc2090, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:30718000
  ph data[0]=0:30718000 (fff)
  get Phys(data[n=1+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:30719000
  set TERM
  ph data[0]=0:30718000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc2090, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff1e0
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc5040, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fc5040, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7044000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7044000)
AtapiVirtToPhysAddr_: f7044000 -> 00000000:3070a000
  ph data[0]=0:3070a000 (fff)
  get Phys(data[n=1+1000]=f7045000)
AtapiVirtToPhysAddr_: f7045000 -> 00000000:30703000
  ph data[1]=0:30703000 (fff)
  get Phys(data[n=2+1000]=f7046000)
AtapiVirtToPhysAddr_: f7046000 -> 00000000:30704000
  ph data[1]=0:30703000 (1fff)
  get Phys(data[n=2+2000]=f7047000)
AtapiVirtToPhysAddr_: f7047000 -> 00000000:30705000
  ph data[1]=0:30703000 (2fff)
  get Phys(data[n=2+3000]=f7048000)
AtapiVirtToPhysAddr_: f7048000 -> 00000000:30706000
  ph data[1]=0:30703000 (3fff)
  get Phys(data[n=2+4000]=f7049000)
AtapiVirtToPhysAddr_: f7049000 -> 00000000:30707000
  ph data[1]=0:30703000 (4fff)
  get Phys(data[n=2+5000]=f704a000)
AtapiVirtToPhysAddr_: f704a000 -> 00000000:30708000
  ph data[1]=0:30703000 (5fff)
  get Phys(data[n=2+6000]=f704b000)
AtapiVirtToPhysAddr_: f704b000 -> 00000000:30709000
  ph data[1]=0:30703000 (6fff)
  get Phys(data[n=2+7000]=f704c000)
AtapiVirtToPhysAddr_: f704c000 -> 00000000:30712000
  ph data[2]=0:30712000 (fff)
  get Phys(data[n=3+1000]=f704d000)
AtapiVirtToPhysAddr_: f704d000 -> 00000000:3070b000
  ph data[3]=0:3070b000 (fff)
  get Phys(data[n=4+1000]=f704e000)
AtapiVirtToPhysAddr_: f704e000 -> 00000000:3070c000
  ph data[3]=0:3070b000 (1fff)
  get Phys(data[n=4+2000]=f704f000)
AtapiVirtToPhysAddr_: f704f000 -> 00000000:3070d000
  ph data[3]=0:3070b000 (2fff)
  get Phys(data[n=4+3000]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:3070e000
  ph data[3]=0:3070b000 (3fff)
  get Phys(data[n=4+4000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:3070f000
  ph data[3]=0:3070b000 (4fff)
  get Phys(data[n=4+5000]=f7052000)
AtapiVirtToPhysAddr_: f7052000 -> 00000000:30710000
  ph data[3]=0:3070b000 (5fff)
  get Phys(data[n=4+6000]=f7053000)
AtapiVirtToPhysAddr_: f7053000 -> 00000000:30711000
  set TERM
  ph data[3]=0:3070b000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc5040, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x4, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff1e0
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc50c0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fc50c0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7054000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7054000)
AtapiVirtToPhysAddr_: f7054000 -> 00000000:3071a000
  ph data[0]=0:3071a000 (fff)
  get Phys(data[n=1+1000]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:30713000
  ph data[1]=0:30713000 (fff)
  get Phys(data[n=2+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:30714000
  ph data[1]=0:30713000 (1fff)
  get Phys(data[n=2+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:30715000
  ph data[1]=0:30713000 (2fff)
  get Phys(data[n=2+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:30716000
  ph data[1]=0:30713000 (3fff)
  get Phys(data[n=2+4000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:30717000
  ph data[1]=0:30713000 (4fff)
  get Phys(data[n=2+5000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:30720000
  ph data[2]=0:30720000 (fff)
  get Phys(data[n=3+1000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:30721000
  ph data[2]=0:30720000 (1fff)
  get Phys(data[n=3+2000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:30722000
  ph data[2]=0:30720000 (2fff)
  get Phys(data[n=3+3000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:3071b000
  ph data[3]=0:3071b000 (fff)
  get Phys(data[n=4+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:3071c000
  ph data[3]=0:3071b000 (1fff)
  get Phys(data[n=4+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:3071d000
  ph data[3]=0:3071b000 (2fff)
  get Phys(data[n=4+3000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:3071e000
  ph data[3]=0:3071b000 (3fff)
  get Phys(data[n=4+4000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:3071f000
  ph data[3]=0:3071b000 (4fff)
  get Phys(data[n=4+5000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:30728000
  ph data[4]=0:30728000 (fff)
  get Phys(data[n=5+1000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:30729000
  set TERM
  ph data[4]=0:30728000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff1e0
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc5140, OrigWordsRequested 0x5100, DevSize 0x51
IdeReadWrite (REQ): Starting sector is 38fc5140, Number of WORDS 0x5100, DevSize 0x51
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7064000, count a200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:3072a000
  ph data[0]=0:3072a000 (fff)
  get Phys(data[n=1+1000]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:30723000
  ph data[1]=0:30723000 (fff)
  get Phys(data[n=2+1000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:30724000
  ph data[1]=0:30723000 (1fff)
  get Phys(data[n=2+2000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:30725000
  ph data[1]=0:30723000 (2fff)
  get Phys(data[n=2+3000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:30726000
  ph data[1]=0:30723000 (3fff)
  get Phys(data[n=2+4000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:30727000
  ph data[1]=0:30723000 (4fff)
  get Phys(data[n=2+5000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:30730000
  ph data[2]=0:30730000 (fff)
  get Phys(data[n=3+1000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:30731000
  ph data[2]=0:30730000 (1fff)
  get Phys(data[n=3+2000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:30732000
  ph data[2]=0:30730000 (2fff)
  get Phys(data[n=3+3000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:3072b000
  ph data[3]=0:3072b000 (fff)
  get Phys(data[n=4+1000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:3072c000
  set TERM
  ph data[3]=0:3072b000 (11ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc50c0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x5, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc5140, Count 0x51(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x4, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 5100, WordsLeft 5100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered a200, full size a200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff1e0
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc5040, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fc5040, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7044000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7044000)
AtapiVirtToPhysAddr_: f7044000 -> 00000000:2fa12000
  ph data[0]=0:2fa12000 (fff)
  get Phys(data[n=1+1000]=f7045000)
AtapiVirtToPhysAddr_: f7045000 -> 00000000:2fa13000
  ph data[0]=0:2fa12000 (1fff)
  get Phys(data[n=1+2000]=f7046000)
AtapiVirtToPhysAddr_: f7046000 -> 00000000:2fa14000
  ph data[0]=0:2fa12000 (2fff)
  get Phys(data[n=1+3000]=f7047000)
AtapiVirtToPhysAddr_: f7047000 -> 00000000:2fa15000
  ph data[0]=0:2fa12000 (3fff)
  get Phys(data[n=1+4000]=f7048000)
AtapiVirtToPhysAddr_: f7048000 -> 00000000:2fa0e000
  ph data[1]=0:2fa0e000 (fff)
  get Phys(data[n=2+1000]=f7049000)
AtapiVirtToPhysAddr_: f7049000 -> 00000000:2fa0f000
  ph data[1]=0:2fa0e000 (1fff)
  get Phys(data[n=2+2000]=f704a000)
AtapiVirtToPhysAddr_: f704a000 -> 00000000:2fa10000
  ph data[1]=0:2fa0e000 (2fff)
  get Phys(data[n=2+3000]=f704b000)
AtapiVirtToPhysAddr_: f704b000 -> 00000000:2fa11000
  ph data[1]=0:2fa0e000 (3fff)
  get Phys(data[n=2+4000]=f704c000)
AtapiVirtToPhysAddr_: f704c000 -> 00000000:2fa1a000
  ph data[2]=0:2fa1a000 (fff)
  get Phys(data[n=3+1000]=f704d000)
AtapiVirtToPhysAddr_: f704d000 -> 00000000:2fa1b000
  ph data[2]=0:2fa1a000 (1fff)
  get Phys(data[n=3+2000]=f704e000)
AtapiVirtToPhysAddr_: f704e000 -> 00000000:2fa1c000
  ph data[2]=0:2fa1a000 (2fff)
  get Phys(data[n=3+3000]=f704f000)
AtapiVirtToPhysAddr_: f704f000 -> 00000000:2fa1d000
  ph data[2]=0:2fa1a000 (3fff)
  get Phys(data[n=3+4000]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:2fa16000
  ph data[3]=0:2fa16000 (fff)
  get Phys(data[n=4+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:2fa17000
  ph data[3]=0:2fa16000 (1fff)
  get Phys(data[n=4+2000]=f7052000)
AtapiVirtToPhysAddr_: f7052000 -> 00000000:2fa18000
  ph data[3]=0:2fa16000 (2fff)
  get Phys(data[n=4+3000]=f7053000)
AtapiVirtToPhysAddr_: f7053000 -> 00000000:2fa19000
  set TERM
  ph data[3]=0:2fa16000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc5040, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x4, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff1e0
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc50c0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fc50c0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7054000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7054000)
AtapiVirtToPhysAddr_: f7054000 -> 00000000:2fa22000
  ph data[0]=0:2fa22000 (fff)
  get Phys(data[n=1+1000]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:2fa23000
  ph data[0]=0:2fa22000 (1fff)
  get Phys(data[n=1+2000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:2fa24000
  ph data[0]=0:2fa22000 (2fff)
  get Phys(data[n=1+3000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:2fa25000
  ph data[0]=0:2fa22000 (3fff)
  get Phys(data[n=1+4000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:2fa1e000
  ph data[1]=0:2fa1e000 (fff)
  get Phys(data[n=2+1000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:2fa1f000
  ph data[1]=0:2fa1e000 (1fff)
  get Phys(data[n=2+2000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:2fa20000
  ph data[1]=0:2fa1e000 (2fff)
  get Phys(data[n=2+3000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:2fa21000
  ph data[1]=0:2fa1e000 (3fff)
  get Phys(data[n=2+4000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:2fa2a000
  ph data[2]=0:2fa2a000 (fff)
  get Phys(data[n=3+1000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:2fa2b000
  ph data[2]=0:2fa2a000 (1fff)
  get Phys(data[n=3+2000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:2fa2c000
  ph data[2]=0:2fa2a000 (2fff)
  get Phys(data[n=3+3000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:2fa2d000
  ph data[2]=0:2fa2a000 (3fff)
  get Phys(data[n=3+4000]=f7060000)
AtapiVirtToPhysAddr_: f7060000 -> 00000000:2fa26000
  ph data[3]=0:2fa26000 (fff)
  get Phys(data[n=4+1000]=f7061000)
AtapiVirtToPhysAddr_: f7061000 -> 00000000:2fa27000
  ph data[3]=0:2fa26000 (1fff)
  get Phys(data[n=4+2000]=f7062000)
AtapiVirtToPhysAddr_: f7062000 -> 00000000:2fa28000
  ph data[3]=0:2fa26000 (2fff)
  get Phys(data[n=4+3000]=f7063000)
AtapiVirtToPhysAddr_: f7063000 -> 00000000:2fa29000
  set TERM
  ph data[3]=0:2fa26000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff1e0
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc5140, OrigWordsRequested 0x5100, DevSize 0x51
IdeReadWrite (REQ): Starting sector is 38fc5140, Number of WORDS 0x5100, DevSize 0x51
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7064000, count a200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7064000)
AtapiVirtToPhysAddr_: f7064000 -> 00000000:2fa32000
  ph data[0]=0:2fa32000 (fff)
  get Phys(data[n=1+1000]=f7065000)
AtapiVirtToPhysAddr_: f7065000 -> 00000000:2fa33000
  ph data[0]=0:2fa32000 (1fff)
  get Phys(data[n=1+2000]=f7066000)
AtapiVirtToPhysAddr_: f7066000 -> 00000000:2fa34000
  ph data[0]=0:2fa32000 (2fff)
  get Phys(data[n=1+3000]=f7067000)
AtapiVirtToPhysAddr_: f7067000 -> 00000000:2fa35000
  ph data[0]=0:2fa32000 (3fff)
  get Phys(data[n=1+4000]=f7068000)
AtapiVirtToPhysAddr_: f7068000 -> 00000000:2fa2e000
  ph data[1]=0:2fa2e000 (fff)
  get Phys(data[n=2+1000]=f7069000)
AtapiVirtToPhysAddr_: f7069000 -> 00000000:2fa2f000
  ph data[1]=0:2fa2e000 (1fff)
  get Phys(data[n=2+2000]=f706a000)
AtapiVirtToPhysAddr_: f706a000 -> 00000000:2fa30000
  ph data[1]=0:2fa2e000 (2fff)
  get Phys(data[n=2+3000]=f706b000)
AtapiVirtToPhysAddr_: f706b000 -> 00000000:2fa31000
  ph data[1]=0:2fa2e000 (3fff)
  get Phys(data[n=2+4000]=f706c000)
AtapiVirtToPhysAddr_: f706c000 -> 00000000:2fa3a000
  ph data[2]=0:2fa3a000 (fff)
  get Phys(data[n=3+1000]=f706d000)
AtapiVirtToPhysAddr_: f706d000 -> 00000000:2fa3b000
  ph data[2]=0:2fa3a000 (1fff)
  get Phys(data[n=3+2000]=f706e000)
AtapiVirtToPhysAddr_: f706e000 -> 00000000:2fa3c000
  set TERM
  ph data[2]=0:2fa3a000 (21ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff0b4
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc50c0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc5140, Count 0x51(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x3, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 5100, WordsLeft 5100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered a200, full size a200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff60c
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc5040, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fc5040, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:2f9ea000
  ph data[0]=0:2f9ea000 (fff)
  get Phys(data[n=1+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:2f9e3000
  set TERM
  ph data[1]=0:2f9e3000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc5040, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x2, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74fecec
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390585e0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390585e0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:2f9da000
  ph data[0]=0:2f9da000 (fff)
  get Phys(data[n=1+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:2f9db000
  set TERM
  ph data[0]=0:2f9da000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390585e0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff40c
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586b0, OrigWordsRequested 0xe00, DevSize 0xe
IdeReadWrite (REQ): Starting sector is 390586b0, Number of WORDS 0xe00, DevSize 0xe
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f750e000, count 1c00, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:2ee6a000
  ph data[0]=0:2ee6a000 (fff)
  get Phys(data[n=1+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:2ee5b000
  set TERM
  ph data[1]=0:2ee5b000 (bff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586b0, Count 0xe(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x2, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered e00, WordsLeft e00
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 1c00, full size 1c00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff4b4
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f95800, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38f95800, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f750e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f750e000)
AtapiVirtToPhysAddr_: f750e000 -> 00000000:6fa15000
  ph data[0]=0:6fa15000 (fff)
  get Phys(data[n=1+1000]=f750f000)
AtapiVirtToPhysAddr_: f750f000 -> 00000000:6fa0e000
  set TERM
  ph data[1]=0:6fa0e000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f95800, Count 0x10(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x2, flags 0x45, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff230
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc1df0, OrigWordsRequested 0x4000, DevSize 0x40
IdeReadWrite (REQ): Starting sector is 38fc1df0, Number of WORDS 0x4000, DevSize 0x40
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7058000, count 8000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:2ed1a000
  ph data[0]=0:2ed1a000 (fff)
  get Phys(data[n=1+1000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:2ed23000
  ph data[1]=0:2ed23000 (fff)
  get Phys(data[n=2+1000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:2ed24000
  ph data[1]=0:2ed23000 (1fff)
  get Phys(data[n=2+2000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:2ed15000
  ph data[2]=0:2ed15000 (fff)
  get Phys(data[n=3+1000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:2ed1e000
  ph data[3]=0:2ed1e000 (fff)
  get Phys(data[n=4+1000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:2ed0f000
  ph data[4]=0:2ed0f000 (fff)
  get Phys(data[n=5+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:2ed10000
  ph data[4]=0:2ed0f000 (1fff)
  get Phys(data[n=5+2000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:2ed19000
  set TERM
  ph data[5]=0:2ed19000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc1df0, Count 0x40(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x6, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7514d00
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7056000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:2ed61000
  ph data[0]=0:2ed61000 (fff)
  get Phys(data[n=1+1000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:2ed6a000
  set TERM
  ph data[1]=0:2ed6a000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 4000, WordsLeft 4000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 8000, full size 8000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x2, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff60c
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc1df0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fc1df0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f705e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:2e401000
  ph data[0]=0:2e401000 (fff)
  get Phys(data[n=1+1000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:2e402000
  set TERM
  ph data[0]=0:2e401000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc1df0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7514d00
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f705e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:2e40b000
  ph data[0]=0:2e40b000 (fff)
  get Phys(data[n=1+1000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:2e40c000
  set TERM
  ph data[0]=0:2e40b000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74fecec
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390585e0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390585e0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f705e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:2e3fb000
  ph data[0]=0:2e3fb000 (fff)
  get Phys(data[n=1+1000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:2e3fc000
  set TERM
  ph data[0]=0:2e3fb000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390585e0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff40c
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586b0, OrigWordsRequested 0xe00, DevSize 0xe
IdeReadWrite (REQ): Starting sector is 390586b0, Number of WORDS 0xe00, DevSize 0xe
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f705e000, count 1c00, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:2e4a9000
  ph data[0]=0:2e4a9000 (fff)
  get Phys(data[n=1+1000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:2e4aa000
  set TERM
  ph data[0]=0:2e4a9000 (1bff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586b0, Count 0xe(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7515230
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39058740, OrigWordsRequested 0x200, DevSize 0x2
IdeReadWrite (REQ): Starting sector is 39058740, Number of WORDS 0x200, DevSize 0x2
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f705c000, count 400, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:2e47b000
  set TERM
  ph data[0]=0:2e47b000 (3ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered e00, WordsLeft e00
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 1c00, full size 1c00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75150fc
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39058740, Count 0x2(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 200, WordsLeft 200
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 400, full size 400
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7514d00
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f705e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:2e50d000
  ph data[0]=0:2e50d000 (fff)
  get Phys(data[n=1+1000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:2e506000
  set TERM
  ph data[1]=0:2e506000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x2, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7508d00
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f705e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:2e554000
  ph data[0]=0:2e554000 (fff)
  get Phys(data[n=1+1000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:2e555000
  set TERM
  ph data[0]=0:2e554000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7509230
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39058740, OrigWordsRequested 0x200, DevSize 0x2
IdeReadWrite (REQ): Starting sector is 39058740, Number of WORDS 0x200, DevSize 0x2
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f705e000, count 400, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:2e594000
  set TERM
  ph data[0]=0:2e594000 (3ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39058740, Count 0x2(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 200, WordsLeft 200
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 400, full size 400
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7509230
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39058700, OrigWordsRequested 0x400, DevSize 0x4
IdeReadWrite (REQ): Starting sector is 39058700, Number of WORDS 0x400, DevSize 0x4
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f705e000, count 800, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:2e5e4000
  set TERM
  ph data[0]=0:2e5e4000 (7ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39058700, Count 0x4(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 400, WordsLeft 400
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 800, full size 800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7509230
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39058720, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 39058720, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f705e000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:2e624000
  set TERM
  ph data[0]=0:2e624000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39058720, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb647e618
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75091e0
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fdf800, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fdf800, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7020000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7020000)
AtapiVirtToPhysAddr_: f7020000 -> 00000000:2e660000
  ph data[0]=0:2e660000 (fff)
  get Phys(data[n=1+1000]=f7021000)
AtapiVirtToPhysAddr_: f7021000 -> 00000000:2e661000
  ph data[0]=0:2e660000 (1fff)
  get Phys(data[n=1+2000]=f7022000)
AtapiVirtToPhysAddr_: f7022000 -> 00000000:2e66a000
  ph data[1]=0:2e66a000 (fff)
  get Phys(data[n=2+1000]=f7023000)
AtapiVirtToPhysAddr_: f7023000 -> 00000000:2e663000
  ph data[2]=0:2e663000 (fff)
  get Phys(data[n=3+1000]=f7024000)
AtapiVirtToPhysAddr_: f7024000 -> 00000000:2e674000
  ph data[3]=0:2e674000 (fff)
  get Phys(data[n=4+1000]=f7025000)
AtapiVirtToPhysAddr_: f7025000 -> 00000000:2e665000
  ph data[4]=0:2e665000 (fff)
  get Phys(data[n=5+1000]=f7026000)
AtapiVirtToPhysAddr_: f7026000 -> 00000000:2e66e000
  ph data[5]=0:2e66e000 (fff)
  get Phys(data[n=6+1000]=f7027000)
AtapiVirtToPhysAddr_: f7027000 -> 00000000:2e667000
  ph data[6]=0:2e667000 (fff)
  get Phys(data[n=7+1000]=f7028000)
AtapiVirtToPhysAddr_: f7028000 -> 00000000:2e668000
  ph data[6]=0:2e667000 (1fff)
  get Phys(data[n=7+2000]=f7029000)
AtapiVirtToPhysAddr_: f7029000 -> 00000000:2e669000
  ph data[6]=0:2e667000 (2fff)
  get Phys(data[n=7+3000]=f702a000)
AtapiVirtToPhysAddr_: f702a000 -> 00000000:2e672000
  ph data[7]=0:2e672000 (fff)
  get Phys(data[n=8+1000]=f702b000)
AtapiVirtToPhysAddr_: f702b000 -> 00000000:2e66b000
  ph data[8]=0:2e66b000 (fff)
  get Phys(data[n=9+1000]=f702c000)
AtapiVirtToPhysAddr_: f702c000 -> 00000000:2e67c000
  ph data[9]=0:2e67c000 (fff)
  get Phys(data[n=10+1000]=f702d000)
AtapiVirtToPhysAddr_: f702d000 -> 00000000:2e66d000
  ph data[10]=0:2e66d000 (fff)
  get Phys(data[n=11+1000]=f702e000)
AtapiVirtToPhysAddr_: f702e000 -> 00000000:2e676000
  ph data[11]=0:2e676000 (fff)
  get Phys(data[n=12+1000]=f702f000)
AtapiVirtToPhysAddr_: f702f000 -> 00000000:2e66f000
  set TERM
  ph data[12]=0:2e66f000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fdf800, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0xd, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75091e0
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fdf880, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fdf880, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7030000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7030000)
AtapiVirtToPhysAddr_: f7030000 -> 00000000:2e670000
  ph data[0]=0:2e670000 (fff)
  get Phys(data[n=1+1000]=f7031000)
AtapiVirtToPhysAddr_: f7031000 -> 00000000:2e671000
  ph data[0]=0:2e670000 (1fff)
  get Phys(data[n=1+2000]=f7032000)
AtapiVirtToPhysAddr_: f7032000 -> 00000000:2e67a000
  ph data[1]=0:2e67a000 (fff)
  get Phys(data[n=2+1000]=f7033000)
AtapiVirtToPhysAddr_: f7033000 -> 00000000:2e673000
  ph data[2]=0:2e673000 (fff)
  get Phys(data[n=3+1000]=f7034000)
AtapiVirtToPhysAddr_: f7034000 -> 00000000:2e684000
  ph data[3]=0:2e684000 (fff)
  get Phys(data[n=4+1000]=f7035000)
AtapiVirtToPhysAddr_: f7035000 -> 00000000:2e675000
  ph data[4]=0:2e675000 (fff)
  get Phys(data[n=5+1000]=f7036000)
AtapiVirtToPhysAddr_: f7036000 -> 00000000:2e67e000
  ph data[5]=0:2e67e000 (fff)
  get Phys(data[n=6+1000]=f7037000)
AtapiVirtToPhysAddr_: f7037000 -> 00000000:2e677000
  ph data[6]=0:2e677000 (fff)
  get Phys(data[n=7+1000]=f7038000)
AtapiVirtToPhysAddr_: f7038000 -> 00000000:2e678000
  ph data[6]=0:2e677000 (1fff)
  get Phys(data[n=7+2000]=f7039000)
AtapiVirtToPhysAddr_: f7039000 -> 00000000:2e679000
  ph data[6]=0:2e677000 (2fff)
  get Phys(data[n=7+3000]=f703a000)
AtapiVirtToPhysAddr_: f703a000 -> 00000000:2e682000
  ph data[7]=0:2e682000 (fff)
  get Phys(data[n=8+1000]=f703b000)
AtapiVirtToPhysAddr_: f703b000 -> 00000000:2e67b000
  ph data[8]=0:2e67b000 (fff)
  get Phys(data[n=9+1000]=f703c000)
AtapiVirtToPhysAddr_: f703c000 -> 00000000:2e68c000
  ph data[9]=0:2e68c000 (fff)
  get Phys(data[n=10+1000]=f703d000)
AtapiVirtToPhysAddr_: f703d000 -> 00000000:2e67d000
  ph data[10]=0:2e67d000 (fff)
  get Phys(data[n=11+1000]=f703e000)
AtapiVirtToPhysAddr_: f703e000 -> 00000000:2e686000
  ph data[11]=0:2e686000 (fff)
  get Phys(data[n=12+1000]=f703f000)
AtapiVirtToPhysAddr_: f703f000 -> 00000000:2e67f000
  set TERM
  ph data[12]=0:2e67f000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75091e0
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fdf900, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fdf900, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7040000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7040000)
AtapiVirtToPhysAddr_: f7040000 -> 00000000:2e680000
  ph data[0]=0:2e680000 (fff)
  get Phys(data[n=1+1000]=f7041000)
AtapiVirtToPhysAddr_: f7041000 -> 00000000:2e681000
  ph data[0]=0:2e680000 (1fff)
  get Phys(data[n=1+2000]=f7042000)
AtapiVirtToPhysAddr_: f7042000 -> 00000000:2e68a000
  ph data[1]=0:2e68a000 (fff)
  get Phys(data[n=2+1000]=f7043000)
AtapiVirtToPhysAddr_: f7043000 -> 00000000:2e683000
  ph data[2]=0:2e683000 (fff)
  get Phys(data[n=3+1000]=f7044000)
AtapiVirtToPhysAddr_: f7044000 -> 00000000:2e694000
  ph data[3]=0:2e694000 (fff)
  get Phys(data[n=4+1000]=f7045000)
AtapiVirtToPhysAddr_: f7045000 -> 00000000:2e685000
  ph data[4]=0:2e685000 (fff)
  get Phys(data[n=5+1000]=f7046000)
AtapiVirtToPhysAddr_: f7046000 -> 00000000:2e68e000
  ph data[5]=0:2e68e000 (fff)
  get Phys(data[n=6+1000]=f7047000)
AtapiVirtToPhysAddr_: f7047000 -> 00000000:2e687000
  ph data[6]=0:2e687000 (fff)
  get Phys(data[n=7+1000]=f7048000)
AtapiVirtToPhysAddr_: f7048000 -> 00000000:2e688000
  ph data[6]=0:2e687000 (1fff)
  get Phys(data[n=7+2000]=f7049000)
AtapiVirtToPhysAddr_: f7049000 -> 00000000:2e689000
  ph data[6]=0:2e687000 (2fff)
  get Phys(data[n=7+3000]=f704a000)
AtapiVirtToPhysAddr_: f704a000 -> 00000000:2e692000
  ph data[7]=0:2e692000 (fff)
  get Phys(data[n=8+1000]=f704b000)
AtapiVirtToPhysAddr_: f704b000 -> 00000000:2e68b000
  ph data[8]=0:2e68b000 (fff)
  get Phys(data[n=9+1000]=f704c000)
AtapiVirtToPhysAddr_: f704c000 -> 00000000:2e69c000
  ph data[9]=0:2e69c000 (fff)
  get Phys(data[n=10+1000]=f704d000)
AtapiVirtToPhysAddr_: f704d000 -> 00000000:2e68d000
  ph data[10]=0:2e68d000 (fff)
  get Phys(data[n=11+1000]=f704e000)
AtapiVirtToPhysAddr_: f704e000 -> 00000000:2e696000
  ph data[11]=0:2e696000 (fff)
  get Phys(data[n=12+1000]=f704f000)
AtapiVirtToPhysAddr_: f704f000 -> 00000000:2e68f000
  set TERM
  ph data[12]=0:2e68f000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75091e0
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fdf980, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fdf980, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7050000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:2e690000
  ph data[0]=0:2e690000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:2e691000
  ph data[0]=0:2e690000 (1fff)
  get Phys(data[n=1+2000]=f7052000)
AtapiVirtToPhysAddr_: f7052000 -> 00000000:2e69a000
  ph data[1]=0:2e69a000 (fff)
  get Phys(data[n=2+1000]=f7053000)
AtapiVirtToPhysAddr_: f7053000 -> 00000000:2e693000
  ph data[2]=0:2e693000 (fff)
  get Phys(data[n=3+1000]=f7054000)
AtapiVirtToPhysAddr_: f7054000 -> 00000000:2e6a4000
  ph data[3]=0:2e6a4000 (fff)
  get Phys(data[n=4+1000]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:2e695000
  ph data[4]=0:2e695000 (fff)
  get Phys(data[n=5+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:2e69e000
  ph data[5]=0:2e69e000 (fff)
  get Phys(data[n=6+1000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:2e697000
  ph data[6]=0:2e697000 (fff)
  get Phys(data[n=7+1000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:2e698000
  ph data[6]=0:2e697000 (1fff)
  get Phys(data[n=7+2000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:2e699000
  ph data[6]=0:2e697000 (2fff)
  get Phys(data[n=7+3000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:2e6a2000
  ph data[7]=0:2e6a2000 (fff)
  get Phys(data[n=8+1000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:2e69b000
  ph data[8]=0:2e69b000 (fff)
  get Phys(data[n=9+1000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:2e6ac000
  ph data[9]=0:2e6ac000 (fff)
  get Phys(data[n=10+1000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:2e69d000
  ph data[10]=0:2e69d000 (fff)
  get Phys(data[n=11+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:2e6a6000
  ph data[11]=0:2e6a6000 (fff)
  get Phys(data[n=12+1000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:2e69f000
  set TERM
  ph data[12]=0:2e69f000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6358890, CDB 0xb63588c0, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=4
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7514d00
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f701e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f701e000)
AtapiVirtToPhysAddr_: f701e000 -> 00000000:2e6a0000
  ph data[0]=0:2e6a0000 (fff)
  get Phys(data[n=1+1000]=f701f000)
AtapiVirtToPhysAddr_: f701f000 -> 00000000:2e6a1000
  set TERM
  ph data[0]=0:2e6a0000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 5 request(s)!
AtapiStartIo: next Srb b6358890
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=4
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fdf880, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0xd, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fdf900, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0xd, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb6471638
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6471638, CDB 0xb6471668, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fdf980, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0xd, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6471638
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6471638, status 1
AtapiInterrupt: RequestComplete, srb 0xb6471638
AtapiInterrupt: NextRequest, srb=0xb6358890
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6358890, CDB 0xb63588c0, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6358890
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6358890, status 1
AtapiInterrupt: RequestComplete, srb 0xb6358890
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6358890, CDB 0xb63588c0, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6358890
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf750960c
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fdf800, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fdf800, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f705e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:2c8d8000
  ph data[0]=0:2c8d8000 (fff)
  get Phys(data[n=1+1000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:2c8d9000
  set TERM
  ph data[0]=0:2c8d8000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fdf800, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x1, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6358890
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6358890, status 1
AtapiInterrupt: RequestComplete, srb 0xb6358890
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6358890, CDB 0xb63588c0, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6358890
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7514d00
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f705e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:2c8e2000
  ph data[0]=0:2c8e2000 (fff)
  get Phys(data[n=1+1000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:2c8e3000
  set TERM
  ph data[0]=0:2c8e2000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x1, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6358890
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6358890, status 1
AtapiInterrupt: RequestComplete, srb 0xb6358890
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6358890, CDB 0xb63588c0, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6358890
TopLevel (3), AtaReq 0xb6778030
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75091e0
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fed140, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fed140, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f7020000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f7020000)
AtapiVirtToPhysAddr_: f7020000 -> 00000000:2c920000
  ph data[0]=0:2c920000 (fff)
  get Phys(data[n=1+1000]=f7021000)
AtapiVirtToPhysAddr_: f7021000 -> 00000000:2c929000
  ph data[1]=0:2c929000 (fff)
  get Phys(data[n=2+1000]=f7022000)
AtapiVirtToPhysAddr_: f7022000 -> 00000000:2c92a000
  ph data[1]=0:2c929000 (1fff)
  get Phys(data[n=2+2000]=f7023000)
AtapiVirtToPhysAddr_: f7023000 -> 00000000:2c923000
  ph data[2]=0:2c923000 (fff)
  get Phys(data[n=3+1000]=f7024000)
AtapiVirtToPhysAddr_: f7024000 -> 00000000:2c924000
  ph data[2]=0:2c923000 (1fff)
  get Phys(data[n=3+2000]=f7025000)
AtapiVirtToPhysAddr_: f7025000 -> 00000000:2c925000
  ph data[2]=0:2c923000 (2fff)
  get Phys(data[n=3+3000]=f7026000)
AtapiVirtToPhysAddr_: f7026000 -> 00000000:2c926000
  ph data[2]=0:2c923000 (3fff)
  get Phys(data[n=3+4000]=f7027000)
AtapiVirtToPhysAddr_: f7027000 -> 00000000:2c91f000
  ph data[3]=0:2c91f000 (fff)
  get Phys(data[n=4+1000]=f7028000)
AtapiVirtToPhysAddr_: f7028000 -> 00000000:2c928000
  ph data[4]=0:2c928000 (fff)
  get Phys(data[n=5+1000]=f7029000)
AtapiVirtToPhysAddr_: f7029000 -> 00000000:2c931000
  ph data[5]=0:2c931000 (fff)
  get Phys(data[n=6+1000]=f702a000)
AtapiVirtToPhysAddr_: f702a000 -> 00000000:2c932000
  ph data[5]=0:2c931000 (1fff)
  get Phys(data[n=6+2000]=f702b000)
AtapiVirtToPhysAddr_: f702b000 -> 00000000:2c92b000
  ph data[6]=0:2c92b000 (fff)
  get Phys(data[n=7+1000]=f702c000)
AtapiVirtToPhysAddr_: f702c000 -> 00000000:2c92c000
  ph data[6]=0:2c92b000 (1fff)
  get Phys(data[n=7+2000]=f702d000)
AtapiVirtToPhysAddr_: f702d000 -> 00000000:2c92d000
  ph data[6]=0:2c92b000 (2fff)
  get Phys(data[n=7+3000]=f702e000)
AtapiVirtToPhysAddr_: f702e000 -> 00000000:2c92e000
  ph data[6]=0:2c92b000 (3fff)
  get Phys(data[n=7+4000]=f702f000)
AtapiVirtToPhysAddr_: f702f000 -> 00000000:2c927000
  set TERM
  ph data[7]=0:2c927000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fed140, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x8, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6358890
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75091e0
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fed1c0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fed1c0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7030000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7030000)
AtapiVirtToPhysAddr_: f7030000 -> 00000000:2c930000
  ph data[0]=0:2c930000 (fff)
  get Phys(data[n=1+1000]=f7031000)
AtapiVirtToPhysAddr_: f7031000 -> 00000000:2c939000
  ph data[1]=0:2c939000 (fff)
  get Phys(data[n=2+1000]=f7032000)
AtapiVirtToPhysAddr_: f7032000 -> 00000000:2c93a000
  ph data[1]=0:2c939000 (1fff)
  get Phys(data[n=2+2000]=f7033000)
AtapiVirtToPhysAddr_: f7033000 -> 00000000:2c933000
  ph data[2]=0:2c933000 (fff)
  get Phys(data[n=3+1000]=f7034000)
AtapiVirtToPhysAddr_: f7034000 -> 00000000:2c934000
  ph data[2]=0:2c933000 (1fff)
  get Phys(data[n=3+2000]=f7035000)
AtapiVirtToPhysAddr_: f7035000 -> 00000000:2c935000
  ph data[2]=0:2c933000 (2fff)
  get Phys(data[n=3+3000]=f7036000)
AtapiVirtToPhysAddr_: f7036000 -> 00000000:2c936000
  ph data[2]=0:2c933000 (3fff)
  get Phys(data[n=3+4000]=f7037000)
AtapiVirtToPhysAddr_: f7037000 -> 00000000:2c92f000
  ph data[3]=0:2c92f000 (fff)
  get Phys(data[n=4+1000]=f7038000)
AtapiVirtToPhysAddr_: f7038000 -> 00000000:2c938000
  ph data[4]=0:2c938000 (fff)
  get Phys(data[n=5+1000]=f7039000)
AtapiVirtToPhysAddr_: f7039000 -> 00000000:2c941000
  ph data[5]=0:2c941000 (fff)
  get Phys(data[n=6+1000]=f703a000)
AtapiVirtToPhysAddr_: f703a000 -> 00000000:2c942000
  ph data[5]=0:2c941000 (1fff)
  get Phys(data[n=6+2000]=f703b000)
AtapiVirtToPhysAddr_: f703b000 -> 00000000:2c93b000
  ph data[6]=0:2c93b000 (fff)
  get Phys(data[n=7+1000]=f703c000)
AtapiVirtToPhysAddr_: f703c000 -> 00000000:2c93c000
  ph data[6]=0:2c93b000 (1fff)
  get Phys(data[n=7+2000]=f703d000)
AtapiVirtToPhysAddr_: f703d000 -> 00000000:2c93d000
  ph data[6]=0:2c93b000 (2fff)
  get Phys(data[n=7+3000]=f703e000)
AtapiVirtToPhysAddr_: f703e000 -> 00000000:2c93e000
  ph data[6]=0:2c93b000 (3fff)
  get Phys(data[n=7+4000]=f703f000)
AtapiVirtToPhysAddr_: f703f000 -> 00000000:2c937000
  set TERM
  ph data[7]=0:2c937000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75091e0
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fed240, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fed240, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7040000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7040000)
AtapiVirtToPhysAddr_: f7040000 -> 00000000:2c940000
  ph data[0]=0:2c940000 (fff)
  get Phys(data[n=1+1000]=f7041000)
AtapiVirtToPhysAddr_: f7041000 -> 00000000:2c949000
  ph data[1]=0:2c949000 (fff)
  get Phys(data[n=2+1000]=f7042000)
AtapiVirtToPhysAddr_: f7042000 -> 00000000:2c94a000
  ph data[1]=0:2c949000 (1fff)
  get Phys(data[n=2+2000]=f7043000)
AtapiVirtToPhysAddr_: f7043000 -> 00000000:2c943000
  ph data[2]=0:2c943000 (fff)
  get Phys(data[n=3+1000]=f7044000)
AtapiVirtToPhysAddr_: f7044000 -> 00000000:2c944000
  ph data[2]=0:2c943000 (1fff)
  get Phys(data[n=3+2000]=f7045000)
AtapiVirtToPhysAddr_: f7045000 -> 00000000:2c945000
  ph data[2]=0:2c943000 (2fff)
  get Phys(data[n=3+3000]=f7046000)
AtapiVirtToPhysAddr_: f7046000 -> 00000000:2c946000
  ph data[2]=0:2c943000 (3fff)
  get Phys(data[n=3+4000]=f7047000)
AtapiVirtToPhysAddr_: f7047000 -> 00000000:2c93f000
  ph data[3]=0:2c93f000 (fff)
  get Phys(data[n=4+1000]=f7048000)
AtapiVirtToPhysAddr_: f7048000 -> 00000000:2c948000
  ph data[4]=0:2c948000 (fff)
  get Phys(data[n=5+1000]=f7049000)
AtapiVirtToPhysAddr_: f7049000 -> 00000000:2c951000
  ph data[5]=0:2c951000 (fff)
  get Phys(data[n=6+1000]=f704a000)
AtapiVirtToPhysAddr_: f704a000 -> 00000000:2c952000
  ph data[5]=0:2c951000 (1fff)
  get Phys(data[n=6+2000]=f704b000)
AtapiVirtToPhysAddr_: f704b000 -> 00000000:2c94b000
  ph data[6]=0:2c94b000 (fff)
  get Phys(data[n=7+1000]=f704c000)
AtapiVirtToPhysAddr_: f704c000 -> 00000000:2c94c000
  ph data[6]=0:2c94b000 (1fff)
  get Phys(data[n=7+2000]=f704d000)
AtapiVirtToPhysAddr_: f704d000 -> 00000000:2c94d000
  ph data[6]=0:2c94b000 (2fff)
  get Phys(data[n=7+3000]=f704e000)
AtapiVirtToPhysAddr_: f704e000 -> 00000000:2c94e000
  ph data[6]=0:2c94b000 (3fff)
  get Phys(data[n=7+4000]=f704f000)
AtapiVirtToPhysAddr_: f704f000 -> 00000000:2c947000
  set TERM
  ph data[7]=0:2c947000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf75091e0
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fed2c0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fed2c0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7050000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:2c950000
  ph data[0]=0:2c950000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:2c959000
  ph data[1]=0:2c959000 (fff)
  get Phys(data[n=2+1000]=f7052000)
AtapiVirtToPhysAddr_: f7052000 -> 00000000:2c95a000
  ph data[1]=0:2c959000 (1fff)
  get Phys(data[n=2+2000]=f7053000)
AtapiVirtToPhysAddr_: f7053000 -> 00000000:2c953000
  ph data[2]=0:2c953000 (fff)
  get Phys(data[n=3+1000]=f7054000)
AtapiVirtToPhysAddr_: f7054000 -> 00000000:2c954000
  ph data[2]=0:2c953000 (1fff)
  get Phys(data[n=3+2000]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:2c955000
  ph data[2]=0:2c953000 (2fff)
  get Phys(data[n=3+3000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:2c956000
  ph data[2]=0:2c953000 (3fff)
  get Phys(data[n=3+4000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:2c94f000
  ph data[3]=0:2c94f000 (fff)
  get Phys(data[n=4+1000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:2c958000
  ph data[4]=0:2c958000 (fff)
  get Phys(data[n=5+1000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:2c961000
  ph data[5]=0:2c961000 (fff)
  get Phys(data[n=6+1000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:2c962000
  ph data[5]=0:2c961000 (1fff)
  get Phys(data[n=6+2000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:2c95b000
  ph data[6]=0:2c95b000 (fff)
  get Phys(data[n=7+1000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:2c95c000
  ph data[6]=0:2c95b000 (1fff)
  get Phys(data[n=7+2000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:2c95d000
  ph data[6]=0:2c95b000 (2fff)
  get Phys(data[n=7+3000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:2c95e000
  ph data[6]=0:2c95b000 (3fff)
  get Phys(data[n=7+4000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:2c957000
  set TERM
  ph data[7]=0:2c957000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=4
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7515230
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39058700, OrigWordsRequested 0x400, DevSize 0x4
IdeReadWrite (REQ): Starting sector is 39058700, Number of WORDS 0x400, DevSize 0x4
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f701e000, count 800, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f701e000)
AtapiVirtToPhysAddr_: f701e000 -> 00000000:2c960000
  set TERM
  ph data[0]=0:2c960000 (7ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 5 request(s)!
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6358890, status 1
AtapiInterrupt: RequestComplete, srb 0xb6358890
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=4
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fed1c0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x8, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fed240, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x8, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb647e618
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb647e618, CDB 0xb647e648, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fed2c0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x8, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b647e618
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb647e618, status 1
AtapiInterrupt: RequestComplete, srb 0xb647e618
AtapiInterrupt: NextRequest, srb=0xb6346750
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39058700, Count 0x4(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 400, WordsLeft 400
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 800, full size 800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6346750
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf750960c
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fed140, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fed140, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f705e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:2b700000
  ph data[0]=0:2b700000 (fff)
  get Phys(data[n=1+1000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:2b6f9000
  set TERM
  ph data[1]=0:2b6f9000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fed140, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x2, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6346750
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf705f230
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fe4360, OrigWordsRequested 0x6b00, DevSize 0x6b
IdeReadWrite (REQ): Starting sector is 38fe4360, Number of WORDS 0x6b00, DevSize 0x6b
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7042000, count d600, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7042000)
AtapiVirtToPhysAddr_: f7042000 -> 00000000:2b788000
  ph data[0]=0:2b788000 (fff)
  get Phys(data[n=1+1000]=f7043000)
AtapiVirtToPhysAddr_: f7043000 -> 00000000:2b781000
  ph data[1]=0:2b781000 (fff)
  get Phys(data[n=2+1000]=f7044000)
AtapiVirtToPhysAddr_: f7044000 -> 00000000:2b77a000
  ph data[2]=0:2b77a000 (fff)
  get Phys(data[n=3+1000]=f7045000)
AtapiVirtToPhysAddr_: f7045000 -> 00000000:2b77b000
  ph data[2]=0:2b77a000 (1fff)
  get Phys(data[n=3+2000]=f7046000)
AtapiVirtToPhysAddr_: f7046000 -> 00000000:2b77c000
  ph data[2]=0:2b77a000 (2fff)
  get Phys(data[n=3+3000]=f7047000)
AtapiVirtToPhysAddr_: f7047000 -> 00000000:2b785000
  ph data[3]=0:2b785000 (fff)
  get Phys(data[n=4+1000]=f7048000)
AtapiVirtToPhysAddr_: f7048000 -> 00000000:2b77e000
  ph data[4]=0:2b77e000 (fff)
  get Phys(data[n=5+1000]=f7049000)
AtapiVirtToPhysAddr_: f7049000 -> 00000000:2b78f000
  ph data[5]=0:2b78f000 (fff)
  get Phys(data[n=6+1000]=f704a000)
AtapiVirtToPhysAddr_: f704a000 -> 00000000:2b790000
  ph data[5]=0:2b78f000 (1fff)
  get Phys(data[n=6+2000]=f704b000)
AtapiVirtToPhysAddr_: f704b000 -> 00000000:2b789000
  ph data[6]=0:2b789000 (fff)
  get Phys(data[n=7+1000]=f704c000)
AtapiVirtToPhysAddr_: f704c000 -> 00000000:2b782000
  ph data[7]=0:2b782000 (fff)
  get Phys(data[n=8+1000]=f704d000)
AtapiVirtToPhysAddr_: f704d000 -> 00000000:2b783000
  ph data[7]=0:2b782000 (1fff)
  get Phys(data[n=8+2000]=f704e000)
AtapiVirtToPhysAddr_: f704e000 -> 00000000:2b784000
  ph data[7]=0:2b782000 (2fff)
  get Phys(data[n=8+3000]=f704f000)
AtapiVirtToPhysAddr_: f704f000 -> 00000000:2b78d000
  set TERM
  ph data[8]=0:2b78d000 (5ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fe4360, Count 0x6b(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x9, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7514d00
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7040000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7040000)
AtapiVirtToPhysAddr_: f7040000 -> 00000000:2b7c8000
  ph data[0]=0:2b7c8000 (fff)
  get Phys(data[n=1+1000]=f7041000)
AtapiVirtToPhysAddr_: f7041000 -> 00000000:2b7c1000
  set TERM
  ph data[1]=0:2b7c1000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 6b00, WordsLeft 6b00
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered d600, full size d600
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x2, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6346750
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf705f60c
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fe4360, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fe4360, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f704e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f704e000)
AtapiVirtToPhysAddr_: f704e000 -> 00000000:2aee9000
  ph data[0]=0:2aee9000 (fff)
  get Phys(data[n=1+1000]=f704f000)
AtapiVirtToPhysAddr_: f704f000 -> 00000000:2aeea000
  set TERM
  ph data[0]=0:2aee9000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fe4360, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6346750
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7515174
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f704a000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f704a000)
AtapiVirtToPhysAddr_: f704a000 -> 00000000:2af06000
  ph data[0]=0:2af06000 (fff)
  get Phys(data[n=1+1000]=f704b000)
AtapiVirtToPhysAddr_: f704b000 -> 00000000:2af07000
  set TERM
  ph data[0]=0:2af06000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6346750
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff230
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ff8560, OrigWordsRequested 0x6000, DevSize 0x60
IdeReadWrite (REQ): Starting sector is 38ff8560, Number of WORDS 0x6000, DevSize 0x60
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7054000, count c000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7054000)
AtapiVirtToPhysAddr_: f7054000 -> 00000000:2af58000
  ph data[0]=0:2af58000 (fff)
  get Phys(data[n=1+1000]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:2af51000
  ph data[1]=0:2af51000 (fff)
  get Phys(data[n=2+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:2af5a000
  ph data[2]=0:2af5a000 (fff)
  get Phys(data[n=3+1000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:2af5b000
  ph data[2]=0:2af5a000 (1fff)
  get Phys(data[n=3+2000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:2af5c000
  ph data[2]=0:2af5a000 (2fff)
  get Phys(data[n=3+3000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:2af55000
  ph data[3]=0:2af55000 (fff)
  get Phys(data[n=4+1000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:2af66000
  ph data[4]=0:2af66000 (fff)
  get Phys(data[n=5+1000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:2af67000
  ph data[4]=0:2af66000 (1fff)
  get Phys(data[n=5+2000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:2af60000
  ph data[5]=0:2af60000 (fff)
  get Phys(data[n=6+1000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:2af59000
  ph data[6]=0:2af59000 (fff)
  get Phys(data[n=7+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:2af62000
  ph data[7]=0:2af62000 (fff)
  get Phys(data[n=8+1000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:2af63000
  set TERM
  ph data[7]=0:2af62000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ff8560, Count 0x60(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x8, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7514d00
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7052000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7052000)
AtapiVirtToPhysAddr_: f7052000 -> 00000000:2af98000
  ph data[0]=0:2af98000 (fff)
  get Phys(data[n=1+1000]=f7053000)
AtapiVirtToPhysAddr_: f7053000 -> 00000000:2af91000
  set TERM
  ph data[1]=0:2af91000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 6000, WordsLeft 6000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered c000, full size c000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x2, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6346750
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff60c
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ff8560, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38ff8560, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:2a238000
  ph data[0]=0:2a238000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:2a239000
  set TERM
  ph data[0]=0:2a238000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ff8560, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6346750
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7514d00
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f705e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:2a242000
  ph data[0]=0:2a242000 (fff)
  get Phys(data[n=1+1000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:2a243000
  set TERM
  ph data[0]=0:2a242000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6346750
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff1e0
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fe0f20, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fe0f20, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f700c000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f700c000)
AtapiVirtToPhysAddr_: f700c000 -> 00000000:2a232000
  ph data[0]=0:2a232000 (fff)
  get Phys(data[n=1+1000]=f700d000)
AtapiVirtToPhysAddr_: f700d000 -> 00000000:2a22b000
  ph data[1]=0:2a22b000 (fff)
  get Phys(data[n=2+1000]=f700e000)
AtapiVirtToPhysAddr_: f700e000 -> 00000000:2a22c000
  ph data[1]=0:2a22b000 (1fff)
  get Phys(data[n=2+2000]=f700f000)
AtapiVirtToPhysAddr_: f700f000 -> 00000000:2a22d000
  ph data[1]=0:2a22b000 (2fff)
  get Phys(data[n=2+3000]=f7010000)
AtapiVirtToPhysAddr_: f7010000 -> 00000000:2a22e000
  ph data[1]=0:2a22b000 (3fff)
  get Phys(data[n=2+4000]=f7011000)
AtapiVirtToPhysAddr_: f7011000 -> 00000000:2a22f000
  ph data[1]=0:2a22b000 (4fff)
  get Phys(data[n=2+5000]=f7012000)
AtapiVirtToPhysAddr_: f7012000 -> 00000000:2a230000
  ph data[1]=0:2a22b000 (5fff)
  get Phys(data[n=2+6000]=f7013000)
AtapiVirtToPhysAddr_: f7013000 -> 00000000:2a281000
  ph data[2]=0:2a281000 (fff)
  get Phys(data[n=3+1000]=f7014000)
AtapiVirtToPhysAddr_: f7014000 -> 00000000:2a23a000
  ph data[3]=0:2a23a000 (fff)
  get Phys(data[n=4+1000]=f7015000)
AtapiVirtToPhysAddr_: f7015000 -> 00000000:2a233000
  ph data[4]=0:2a233000 (fff)
  get Phys(data[n=5+1000]=f7016000)
AtapiVirtToPhysAddr_: f7016000 -> 00000000:2a234000
  ph data[4]=0:2a233000 (1fff)
  get Phys(data[n=5+2000]=f7017000)
AtapiVirtToPhysAddr_: f7017000 -> 00000000:2a235000
  ph data[4]=0:2a233000 (2fff)
  get Phys(data[n=5+3000]=f7018000)
AtapiVirtToPhysAddr_: f7018000 -> 00000000:2a236000
  ph data[4]=0:2a233000 (3fff)
  get Phys(data[n=5+4000]=f7019000)
AtapiVirtToPhysAddr_: f7019000 -> 00000000:2a237000
  ph data[4]=0:2a233000 (4fff)
  get Phys(data[n=5+5000]=f701a000)
AtapiVirtToPhysAddr_: f701a000 -> 00000000:2a280000
  ph data[5]=0:2a280000 (fff)
  get Phys(data[n=6+1000]=f701b000)
AtapiVirtToPhysAddr_: f701b000 -> 00000000:2a289000
  set TERM
  ph data[6]=0:2a289000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fe0f20, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x7, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff1e0
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fe0fa0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fe0fa0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f701c000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f701c000)
AtapiVirtToPhysAddr_: f701c000 -> 00000000:2a282000
  ph data[0]=0:2a282000 (fff)
  get Phys(data[n=1+1000]=f701d000)
AtapiVirtToPhysAddr_: f701d000 -> 00000000:2a23b000
  ph data[1]=0:2a23b000 (fff)
  get Phys(data[n=2+1000]=f701e000)
AtapiVirtToPhysAddr_: f701e000 -> 00000000:2a23c000
  ph data[1]=0:2a23b000 (1fff)
  get Phys(data[n=2+2000]=f701f000)
AtapiVirtToPhysAddr_: f701f000 -> 00000000:2a23d000
  ph data[1]=0:2a23b000 (2fff)
  get Phys(data[n=2+3000]=f7020000)
AtapiVirtToPhysAddr_: f7020000 -> 00000000:2a27e000
  ph data[2]=0:2a27e000 (fff)
  get Phys(data[n=3+1000]=f7021000)
AtapiVirtToPhysAddr_: f7021000 -> 00000000:2a27f000
  ph data[2]=0:2a27e000 (1fff)
  get Phys(data[n=3+2000]=f7022000)
AtapiVirtToPhysAddr_: f7022000 -> 00000000:2a288000
  ph data[3]=0:2a288000 (fff)
  get Phys(data[n=4+1000]=f7023000)
AtapiVirtToPhysAddr_: f7023000 -> 00000000:2a291000
  ph data[4]=0:2a291000 (fff)
  get Phys(data[n=5+1000]=f7024000)
AtapiVirtToPhysAddr_: f7024000 -> 00000000:2a28a000
  ph data[5]=0:2a28a000 (fff)
  get Phys(data[n=6+1000]=f7025000)
AtapiVirtToPhysAddr_: f7025000 -> 00000000:2a283000
  ph data[6]=0:2a283000 (fff)
  get Phys(data[n=7+1000]=f7026000)
AtapiVirtToPhysAddr_: f7026000 -> 00000000:2a284000
  ph data[6]=0:2a283000 (1fff)
  get Phys(data[n=7+2000]=f7027000)
AtapiVirtToPhysAddr_: f7027000 -> 00000000:2a285000
  ph data[6]=0:2a283000 (2fff)
  get Phys(data[n=7+3000]=f7028000)
AtapiVirtToPhysAddr_: f7028000 -> 00000000:2a286000
  ph data[6]=0:2a283000 (3fff)
  get Phys(data[n=7+4000]=f7029000)
AtapiVirtToPhysAddr_: f7029000 -> 00000000:2a287000
  ph data[6]=0:2a283000 (4fff)
  get Phys(data[n=7+5000]=f702a000)
AtapiVirtToPhysAddr_: f702a000 -> 00000000:2a290000
  ph data[7]=0:2a290000 (fff)
  get Phys(data[n=8+1000]=f702b000)
AtapiVirtToPhysAddr_: f702b000 -> 00000000:2a299000
  set TERM
  ph data[8]=0:2a299000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff1e0
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fe1020, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fe1020, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f702c000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f702c000)
AtapiVirtToPhysAddr_: f702c000 -> 00000000:2a292000
  ph data[0]=0:2a292000 (fff)
  get Phys(data[n=1+1000]=f702d000)
AtapiVirtToPhysAddr_: f702d000 -> 00000000:2a28b000
  ph data[1]=0:2a28b000 (fff)
  get Phys(data[n=2+1000]=f702e000)
AtapiVirtToPhysAddr_: f702e000 -> 00000000:2a28c000
  ph data[1]=0:2a28b000 (1fff)
  get Phys(data[n=2+2000]=f702f000)
AtapiVirtToPhysAddr_: f702f000 -> 00000000:2a28d000
  ph data[1]=0:2a28b000 (2fff)
  get Phys(data[n=2+3000]=f7030000)
AtapiVirtToPhysAddr_: f7030000 -> 00000000:2a28e000
  ph data[1]=0:2a28b000 (3fff)
  get Phys(data[n=2+4000]=f7031000)
AtapiVirtToPhysAddr_: f7031000 -> 00000000:2a28f000
  ph data[1]=0:2a28b000 (4fff)
  get Phys(data[n=2+5000]=f7032000)
AtapiVirtToPhysAddr_: f7032000 -> 00000000:2a298000
  ph data[2]=0:2a298000 (fff)
  get Phys(data[n=3+1000]=f7033000)
AtapiVirtToPhysAddr_: f7033000 -> 00000000:2a2a1000
  ph data[3]=0:2a2a1000 (fff)
  get Phys(data[n=4+1000]=f7034000)
AtapiVirtToPhysAddr_: f7034000 -> 00000000:2a29a000
  ph data[4]=0:2a29a000 (fff)
  get Phys(data[n=5+1000]=f7035000)
AtapiVirtToPhysAddr_: f7035000 -> 00000000:2a293000
  ph data[5]=0:2a293000 (fff)
  get Phys(data[n=6+1000]=f7036000)
AtapiVirtToPhysAddr_: f7036000 -> 00000000:2a294000
  ph data[5]=0:2a293000 (1fff)
  get Phys(data[n=6+2000]=f7037000)
AtapiVirtToPhysAddr_: f7037000 -> 00000000:2a295000
  ph data[5]=0:2a293000 (2fff)
  get Phys(data[n=6+3000]=f7038000)
AtapiVirtToPhysAddr_: f7038000 -> 00000000:2a296000
  ph data[5]=0:2a293000 (3fff)
  get Phys(data[n=6+4000]=f7039000)
AtapiVirtToPhysAddr_: f7039000 -> 00000000:2a297000
  ph data[5]=0:2a293000 (4fff)
  get Phys(data[n=6+5000]=f703a000)
AtapiVirtToPhysAddr_: f703a000 -> 00000000:2a2a0000
  ph data[6]=0:2a2a0000 (fff)
  get Phys(data[n=7+1000]=f703b000)
AtapiVirtToPhysAddr_: f703b000 -> 00000000:2a2a9000
  set TERM
  ph data[7]=0:2a2a9000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6358890, CDB 0xb63588c0, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff1e0
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fe10a0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fe10a0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f703c000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f703c000)
AtapiVirtToPhysAddr_: f703c000 -> 00000000:2a2a2000
  ph data[0]=0:2a2a2000 (fff)
  get Phys(data[n=1+1000]=f703d000)
AtapiVirtToPhysAddr_: f703d000 -> 00000000:2a29b000
  ph data[1]=0:2a29b000 (fff)
  get Phys(data[n=2+1000]=f703e000)
AtapiVirtToPhysAddr_: f703e000 -> 00000000:2a29c000
  ph data[1]=0:2a29b000 (1fff)
  get Phys(data[n=2+2000]=f703f000)
AtapiVirtToPhysAddr_: f703f000 -> 00000000:2a29d000
  ph data[1]=0:2a29b000 (2fff)
  get Phys(data[n=2+3000]=f7040000)
AtapiVirtToPhysAddr_: f7040000 -> 00000000:2a29e000
  ph data[1]=0:2a29b000 (3fff)
  get Phys(data[n=2+4000]=f7041000)
AtapiVirtToPhysAddr_: f7041000 -> 00000000:2a29f000
  ph data[1]=0:2a29b000 (4fff)
  get Phys(data[n=2+5000]=f7042000)
AtapiVirtToPhysAddr_: f7042000 -> 00000000:2a2a8000
  ph data[2]=0:2a2a8000 (fff)
  get Phys(data[n=3+1000]=f7043000)
AtapiVirtToPhysAddr_: f7043000 -> 00000000:2a2b1000
  ph data[3]=0:2a2b1000 (fff)
  get Phys(data[n=4+1000]=f7044000)
AtapiVirtToPhysAddr_: f7044000 -> 00000000:2a2aa000
  ph data[4]=0:2a2aa000 (fff)
  get Phys(data[n=5+1000]=f7045000)
AtapiVirtToPhysAddr_: f7045000 -> 00000000:2a2a3000
  ph data[5]=0:2a2a3000 (fff)
  get Phys(data[n=6+1000]=f7046000)
AtapiVirtToPhysAddr_: f7046000 -> 00000000:2a2a4000
  ph data[5]=0:2a2a3000 (1fff)
  get Phys(data[n=6+2000]=f7047000)
AtapiVirtToPhysAddr_: f7047000 -> 00000000:2a2a5000
  ph data[5]=0:2a2a3000 (2fff)
  get Phys(data[n=6+3000]=f7048000)
AtapiVirtToPhysAddr_: f7048000 -> 00000000:2a2a6000
  ph data[5]=0:2a2a3000 (3fff)
  get Phys(data[n=6+4000]=f7049000)
AtapiVirtToPhysAddr_: f7049000 -> 00000000:2a2a7000
  ph data[5]=0:2a2a3000 (4fff)
  get Phys(data[n=6+5000]=f704a000)
AtapiVirtToPhysAddr_: f704a000 -> 00000000:2a2b0000
  ph data[6]=0:2a2b0000 (fff)
  get Phys(data[n=7+1000]=f704b000)
AtapiVirtToPhysAddr_: f704b000 -> 00000000:2a2b9000
  set TERM
  ph data[7]=0:2a2b9000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b6358890
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb63346a8, CDB 0xb63346d8, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=4
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7515230
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39058720, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 39058720, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f705e000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:2a2b2000
  set TERM
  ph data[0]=0:2a2b2000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 5 request(s)!
AtapiStartIo: next Srb b63346a8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=4
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fe0fa0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x9, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fe1020, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x8, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb6358890
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6358890, CDB 0xb63588c0, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fe10a0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x8, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6358890
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6358890, status 1
AtapiInterrupt: RequestComplete, srb 0xb6358890
AtapiInterrupt: NextRequest, srb=0xb63346a8
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb63346a8, CDB 0xb63346d8, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39058720, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x1, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b63346a8
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb63346a8, status 1
AtapiInterrupt: RequestComplete, srb 0xb63346a8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb63346a8, CDB 0xb63346d8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb63346a8
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff60c
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fe0f20, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fe0f20, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f705c000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:28fd2000
  ph data[0]=0:28fd2000 (fff)
  get Phys(data[n=1+1000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:28fd3000
  set TERM
  ph data[0]=0:28fd2000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fe0f20, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b63346a8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb63346a8, status 1
AtapiInterrupt: RequestComplete, srb 0xb63346a8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb63346a8, CDB 0xb63346d8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb63346a8
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff230
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38feace0, OrigWordsRequested 0x8200, DevSize 0x82
IdeReadWrite (REQ): Starting sector is 38feace0, Number of WORDS 0x8200, DevSize 0x82
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f703a000, count 10400, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f703a000)
AtapiVirtToPhysAddr_: f703a000 -> 00000000:28fe0000
  ph data[0]=0:28fe0000 (fff)
  get Phys(data[n=1+1000]=f703b000)
AtapiVirtToPhysAddr_: f703b000 -> 00000000:28fe1000
  ph data[0]=0:28fe0000 (1fff)
  get Phys(data[n=1+2000]=f703c000)
AtapiVirtToPhysAddr_: f703c000 -> 00000000:28fea000
  ph data[1]=0:28fea000 (fff)
  get Phys(data[n=2+1000]=f703d000)
AtapiVirtToPhysAddr_: f703d000 -> 00000000:28fdb000
  ph data[2]=0:28fdb000 (fff)
  get Phys(data[n=3+1000]=f703e000)
AtapiVirtToPhysAddr_: f703e000 -> 00000000:28fe4000
  ph data[3]=0:28fe4000 (fff)
  get Phys(data[n=4+1000]=f703f000)
AtapiVirtToPhysAddr_: f703f000 -> 00000000:28fe5000
  ph data[3]=0:28fe4000 (1fff)
  get Phys(data[n=4+2000]=f7040000)
AtapiVirtToPhysAddr_: f7040000 -> 00000000:28fe6000
  ph data[3]=0:28fe4000 (2fff)
  get Phys(data[n=4+3000]=f7041000)
AtapiVirtToPhysAddr_: f7041000 -> 00000000:28fe7000
  ph data[3]=0:28fe4000 (3fff)
  get Phys(data[n=4+4000]=f7042000)
AtapiVirtToPhysAddr_: f7042000 -> 00000000:28fe8000
  ph data[3]=0:28fe4000 (4fff)
  get Phys(data[n=4+5000]=f7043000)
AtapiVirtToPhysAddr_: f7043000 -> 00000000:28fe9000
  ph data[3]=0:28fe4000 (5fff)
  get Phys(data[n=4+6000]=f7044000)
AtapiVirtToPhysAddr_: f7044000 -> 00000000:28ff2000
  ph data[4]=0:28ff2000 (fff)
  get Phys(data[n=5+1000]=f7045000)
AtapiVirtToPhysAddr_: f7045000 -> 00000000:28fe3000
  ph data[5]=0:28fe3000 (fff)
  get Phys(data[n=6+1000]=f7046000)
AtapiVirtToPhysAddr_: f7046000 -> 00000000:28fec000
  ph data[6]=0:28fec000 (fff)
  get Phys(data[n=7+1000]=f7047000)
AtapiVirtToPhysAddr_: f7047000 -> 00000000:28fed000
  ph data[6]=0:28fec000 (1fff)
  get Phys(data[n=7+2000]=f7048000)
AtapiVirtToPhysAddr_: f7048000 -> 00000000:28fee000
  ph data[6]=0:28fec000 (2fff)
  get Phys(data[n=7+3000]=f7049000)
AtapiVirtToPhysAddr_: f7049000 -> 00000000:28fef000
  ph data[6]=0:28fec000 (3fff)
  get Phys(data[n=7+4000]=f704a000)
AtapiVirtToPhysAddr_: f704a000 -> 00000000:28ff0000
  set TERM
  ph data[6]=0:28fec000 (43ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38feace0, Count 0x82(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x7, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b63346a8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8200, WordsLeft 8200
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10400, full size 10400
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb63346a8, status 1
AtapiInterrupt: RequestComplete, srb 0xb63346a8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb63346a8, CDB 0xb63346d8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb63346a8
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff60c
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38feace0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38feace0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f705e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:28fd8000
  ph data[0]=0:28fd8000 (fff)
  get Phys(data[n=1+1000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:28fd9000
  set TERM
  ph data[0]=0:28fd8000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38feace0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b63346a8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb63346a8, status 1
AtapiInterrupt: RequestComplete, srb 0xb63346a8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb63346a8, CDB 0xb63346d8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb63346a8
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff230
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc0750, OrigWordsRequested 0x6100, DevSize 0x61
IdeReadWrite (REQ): Starting sector is 38fc0750, Number of WORDS 0x6100, DevSize 0x61
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7052000, count c200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7052000)
AtapiVirtToPhysAddr_: f7052000 -> 00000000:29060000
  ph data[0]=0:29060000 (fff)
  get Phys(data[n=1+1000]=f7053000)
AtapiVirtToPhysAddr_: f7053000 -> 00000000:29061000
  ph data[0]=0:29060000 (1fff)
  get Phys(data[n=1+2000]=f7054000)
AtapiVirtToPhysAddr_: f7054000 -> 00000000:29072000
  ph data[1]=0:29072000 (fff)
  get Phys(data[n=2+1000]=f7055000)
AtapiVirtToPhysAddr_: f7055000 -> 00000000:29063000
  ph data[2]=0:29063000 (fff)
  get Phys(data[n=3+1000]=f7056000)
AtapiVirtToPhysAddr_: f7056000 -> 00000000:29064000
  ph data[2]=0:29063000 (1fff)
  get Phys(data[n=3+2000]=f7057000)
AtapiVirtToPhysAddr_: f7057000 -> 00000000:29065000
  ph data[2]=0:29063000 (2fff)
  get Phys(data[n=3+3000]=f7058000)
AtapiVirtToPhysAddr_: f7058000 -> 00000000:2906e000
  ph data[3]=0:2906e000 (fff)
  get Phys(data[n=4+1000]=f7059000)
AtapiVirtToPhysAddr_: f7059000 -> 00000000:2906f000
  ph data[3]=0:2906e000 (1fff)
  get Phys(data[n=4+2000]=f705a000)
AtapiVirtToPhysAddr_: f705a000 -> 00000000:29068000
  ph data[4]=0:29068000 (fff)
  get Phys(data[n=5+1000]=f705b000)
AtapiVirtToPhysAddr_: f705b000 -> 00000000:29069000
  ph data[4]=0:29068000 (1fff)
  get Phys(data[n=5+2000]=f705c000)
AtapiVirtToPhysAddr_: f705c000 -> 00000000:2907a000
  ph data[5]=0:2907a000 (fff)
  get Phys(data[n=6+1000]=f705d000)
AtapiVirtToPhysAddr_: f705d000 -> 00000000:2906b000
  ph data[6]=0:2906b000 (fff)
  get Phys(data[n=7+1000]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:2906c000
  set TERM
  ph data[6]=0:2906b000 (11ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc0750, Count 0x61(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x7, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b63346a8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 6100, WordsLeft 6100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered c200, full size c200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb63346a8, status 1
AtapiInterrupt: RequestComplete, srb 0xb63346a8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb63346a8, CDB 0xb63346d8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb63346a8
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff60c
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc0750, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fc0750, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f705e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:28fd7000
  ph data[0]=0:28fd7000 (fff)
  get Phys(data[n=1+1000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:28fd0000
  set TERM
  ph data[1]=0:28fd0000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc0750, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x2, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b63346a8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb63346a8, status 1
AtapiInterrupt: RequestComplete, srb 0xb63346a8
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb63346a8, CDB 0xb63346d8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb63346a8
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff1e0
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ff5280, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ff5280, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6ffc000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6ffc000)
AtapiVirtToPhysAddr_: f6ffc000 -> 00000000:290dd000
  ph data[0]=0:290dd000 (fff)
  get Phys(data[n=1+1000]=f6ffd000)
AtapiVirtToPhysAddr_: f6ffd000 -> 00000000:290e6000
  ph data[1]=0:290e6000 (fff)
  get Phys(data[n=2+1000]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:290df000
  ph data[2]=0:290df000 (fff)
  get Phys(data[n=3+1000]=f6fff000)
AtapiVirtToPhysAddr_: f6fff000 -> 00000000:290d8000
  ph data[3]=0:290d8000 (fff)
  get Phys(data[n=4+1000]=f7000000)
AtapiVirtToPhysAddr_: f7000000 -> 00000000:290d9000
  ph data[3]=0:290d8000 (1fff)
  get Phys(data[n=4+2000]=f7001000)
AtapiVirtToPhysAddr_: f7001000 -> 00000000:290e2000
  ph data[4]=0:290e2000 (fff)
  get Phys(data[n=5+1000]=f7002000)
AtapiVirtToPhysAddr_: f7002000 -> 00000000:290db000
  ph data[5]=0:290db000 (fff)
  get Phys(data[n=6+1000]=f7003000)
AtapiVirtToPhysAddr_: f7003000 -> 00000000:290e4000
  ph data[6]=0:290e4000 (fff)
  get Phys(data[n=7+1000]=f7004000)
AtapiVirtToPhysAddr_: f7004000 -> 00000000:290e5000
  ph data[6]=0:290e4000 (1fff)
  get Phys(data[n=7+2000]=f7005000)
AtapiVirtToPhysAddr_: f7005000 -> 00000000:290ee000
  ph data[7]=0:290ee000 (fff)
  get Phys(data[n=8+1000]=f7006000)
AtapiVirtToPhysAddr_: f7006000 -> 00000000:290e7000
  ph data[8]=0:290e7000 (fff)
  get Phys(data[n=9+1000]=f7007000)
AtapiVirtToPhysAddr_: f7007000 -> 00000000:290e0000
  ph data[9]=0:290e0000 (fff)
  get Phys(data[n=10+1000]=f7008000)
AtapiVirtToPhysAddr_: f7008000 -> 00000000:290e1000
  ph data[9]=0:290e0000 (1fff)
  get Phys(data[n=10+2000]=f7009000)
AtapiVirtToPhysAddr_: f7009000 -> 00000000:290ea000
  ph data[10]=0:290ea000 (fff)
  get Phys(data[n=11+1000]=f700a000)
AtapiVirtToPhysAddr_: f700a000 -> 00000000:290e3000
  ph data[11]=0:290e3000 (fff)
  get Phys(data[n=12+1000]=f700b000)
AtapiVirtToPhysAddr_: f700b000 -> 00000000:290ec000
  set TERM
  ph data[12]=0:290ec000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ff5280, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0xd, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b63346a8
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff1e0
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ff5300, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ff5300, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f700c000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f700c000)
AtapiVirtToPhysAddr_: f700c000 -> 00000000:290ed000
  ph data[0]=0:290ed000 (fff)
  get Phys(data[n=1+1000]=f700d000)
AtapiVirtToPhysAddr_: f700d000 -> 00000000:290f6000
  ph data[1]=0:290f6000 (fff)
  get Phys(data[n=2+1000]=f700e000)
AtapiVirtToPhysAddr_: f700e000 -> 00000000:290ef000
  ph data[2]=0:290ef000 (fff)
  get Phys(data[n=3+1000]=f700f000)
AtapiVirtToPhysAddr_: f700f000 -> 00000000:290e8000
  ph data[3]=0:290e8000 (fff)
  get Phys(data[n=4+1000]=f7010000)
AtapiVirtToPhysAddr_: f7010000 -> 00000000:290e9000
  ph data[3]=0:290e8000 (1fff)
  get Phys(data[n=4+2000]=f7011000)
AtapiVirtToPhysAddr_: f7011000 -> 00000000:290f2000
  ph data[4]=0:290f2000 (fff)
  get Phys(data[n=5+1000]=f7012000)
AtapiVirtToPhysAddr_: f7012000 -> 00000000:290eb000
  ph data[5]=0:290eb000 (fff)
  get Phys(data[n=6+1000]=f7013000)
AtapiVirtToPhysAddr_: f7013000 -> 00000000:290f4000
  ph data[6]=0:290f4000 (fff)
  get Phys(data[n=7+1000]=f7014000)
AtapiVirtToPhysAddr_: f7014000 -> 00000000:290f5000
  ph data[6]=0:290f4000 (1fff)
  get Phys(data[n=7+2000]=f7015000)
AtapiVirtToPhysAddr_: f7015000 -> 00000000:290fe000
  ph data[7]=0:290fe000 (fff)
  get Phys(data[n=8+1000]=f7016000)
AtapiVirtToPhysAddr_: f7016000 -> 00000000:290f7000
  ph data[8]=0:290f7000 (fff)
  get Phys(data[n=9+1000]=f7017000)
AtapiVirtToPhysAddr_: f7017000 -> 00000000:290f0000
  ph data[9]=0:290f0000 (fff)
  get Phys(data[n=10+1000]=f7018000)
AtapiVirtToPhysAddr_: f7018000 -> 00000000:290f1000
  ph data[9]=0:290f0000 (1fff)
  get Phys(data[n=10+2000]=f7019000)
AtapiVirtToPhysAddr_: f7019000 -> 00000000:290fa000
  ph data[10]=0:290fa000 (fff)
  get Phys(data[n=11+1000]=f701a000)
AtapiVirtToPhysAddr_: f701a000 -> 00000000:290f3000
  ph data[11]=0:290f3000 (fff)
  get Phys(data[n=12+1000]=f701b000)
AtapiVirtToPhysAddr_: f701b000 -> 00000000:290fc000
  set TERM
  ph data[12]=0:290fc000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff1e0
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ff5380, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ff5380, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f701c000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f701c000)
AtapiVirtToPhysAddr_: f701c000 -> 00000000:290fd000
  ph data[0]=0:290fd000 (fff)
  get Phys(data[n=1+1000]=f701d000)
AtapiVirtToPhysAddr_: f701d000 -> 00000000:29106000
  ph data[1]=0:29106000 (fff)
  get Phys(data[n=2+1000]=f701e000)
AtapiVirtToPhysAddr_: f701e000 -> 00000000:290ff000
  ph data[2]=0:290ff000 (fff)
  get Phys(data[n=3+1000]=f701f000)
AtapiVirtToPhysAddr_: f701f000 -> 00000000:290f8000
  ph data[3]=0:290f8000 (fff)
  get Phys(data[n=4+1000]=f7020000)
AtapiVirtToPhysAddr_: f7020000 -> 00000000:290f9000
  ph data[3]=0:290f8000 (1fff)
  get Phys(data[n=4+2000]=f7021000)
AtapiVirtToPhysAddr_: f7021000 -> 00000000:29102000
  ph data[4]=0:29102000 (fff)
  get Phys(data[n=5+1000]=f7022000)
AtapiVirtToPhysAddr_: f7022000 -> 00000000:290fb000
  ph data[5]=0:290fb000 (fff)
  get Phys(data[n=6+1000]=f7023000)
AtapiVirtToPhysAddr_: f7023000 -> 00000000:29104000
  ph data[6]=0:29104000 (fff)
  get Phys(data[n=7+1000]=f7024000)
AtapiVirtToPhysAddr_: f7024000 -> 00000000:29105000
  ph data[6]=0:29104000 (1fff)
  get Phys(data[n=7+2000]=f7025000)
AtapiVirtToPhysAddr_: f7025000 -> 00000000:2910e000
  ph data[7]=0:2910e000 (fff)
  get Phys(data[n=8+1000]=f7026000)
AtapiVirtToPhysAddr_: f7026000 -> 00000000:29107000
  ph data[8]=0:29107000 (fff)
  get Phys(data[n=9+1000]=f7027000)
AtapiVirtToPhysAddr_: f7027000 -> 00000000:29100000
  ph data[9]=0:29100000 (fff)
  get Phys(data[n=10+1000]=f7028000)
AtapiVirtToPhysAddr_: f7028000 -> 00000000:29101000
  ph data[9]=0:29100000 (1fff)
  get Phys(data[n=10+2000]=f7029000)
AtapiVirtToPhysAddr_: f7029000 -> 00000000:2910a000
  ph data[10]=0:2910a000 (fff)
  get Phys(data[n=11+1000]=f702a000)
AtapiVirtToPhysAddr_: f702a000 -> 00000000:29103000
  ph data[11]=0:29103000 (fff)
  get Phys(data[n=12+1000]=f702b000)
AtapiVirtToPhysAddr_: f702b000 -> 00000000:2910c000
  set TERM
  ph data[12]=0:2910c000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff1e0
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ff5400, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ff5400, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f702c000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f702c000)
AtapiVirtToPhysAddr_: f702c000 -> 00000000:2910d000
  ph data[0]=0:2910d000 (fff)
  get Phys(data[n=1+1000]=f702d000)
AtapiVirtToPhysAddr_: f702d000 -> 00000000:29116000
  ph data[1]=0:29116000 (fff)
  get Phys(data[n=2+1000]=f702e000)
AtapiVirtToPhysAddr_: f702e000 -> 00000000:2910f000
  ph data[2]=0:2910f000 (fff)
  get Phys(data[n=3+1000]=f702f000)
AtapiVirtToPhysAddr_: f702f000 -> 00000000:29108000
  ph data[3]=0:29108000 (fff)
  get Phys(data[n=4+1000]=f7030000)
AtapiVirtToPhysAddr_: f7030000 -> 00000000:29109000
  ph data[3]=0:29108000 (1fff)
  get Phys(data[n=4+2000]=f7031000)
AtapiVirtToPhysAddr_: f7031000 -> 00000000:29112000
  ph data[4]=0:29112000 (fff)
  get Phys(data[n=5+1000]=f7032000)
AtapiVirtToPhysAddr_: f7032000 -> 00000000:2910b000
  ph data[5]=0:2910b000 (fff)
  get Phys(data[n=6+1000]=f7033000)
AtapiVirtToPhysAddr_: f7033000 -> 00000000:29114000
  ph data[6]=0:29114000 (fff)
  get Phys(data[n=7+1000]=f7034000)
AtapiVirtToPhysAddr_: f7034000 -> 00000000:29115000
  ph data[6]=0:29114000 (1fff)
  get Phys(data[n=7+2000]=f7035000)
AtapiVirtToPhysAddr_: f7035000 -> 00000000:2911e000
  ph data[7]=0:2911e000 (fff)
  get Phys(data[n=8+1000]=f7036000)
AtapiVirtToPhysAddr_: f7036000 -> 00000000:29117000
  ph data[8]=0:29117000 (fff)
  get Phys(data[n=9+1000]=f7037000)
AtapiVirtToPhysAddr_: f7037000 -> 00000000:29110000
  ph data[9]=0:29110000 (fff)
  get Phys(data[n=10+1000]=f7038000)
AtapiVirtToPhysAddr_: f7038000 -> 00000000:29111000
  ph data[9]=0:29110000 (1fff)
  get Phys(data[n=10+2000]=f7039000)
AtapiVirtToPhysAddr_: f7039000 -> 00000000:2911a000
  ph data[10]=0:2911a000 (fff)
  get Phys(data[n=11+1000]=f703a000)
AtapiVirtToPhysAddr_: f703a000 -> 00000000:29113000
  ph data[11]=0:29113000 (fff)
  get Phys(data[n=12+1000]=f703b000)
AtapiVirtToPhysAddr_: f703b000 -> 00000000:2911c000
  set TERM
  ph data[12]=0:2911c000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb63346a8, status 1
AtapiInterrupt: RequestComplete, srb 0xb63346a8
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704bad8
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ff5300, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0xd, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704b678
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ff5380, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0xd, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6346750
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704ba1c
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ff5400, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0xd, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6346750
TopLevel (3), AtaReq 0xb677a060
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff60c
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ff5280, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38ff5280, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f705e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f705e000)
AtapiVirtToPhysAddr_: f705e000 -> 00000000:28fcc000
  ph data[0]=0:28fcc000 (fff)
  get Phys(data[n=1+1000]=f705f000)
AtapiVirtToPhysAddr_: f705f000 -> 00000000:28fd5000
  set TERM
  ph data[1]=0:28fd5000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ff5280, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x2, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TAtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=7
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fffd60, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x9, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb6346750
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=6
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fffde0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x9, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0xb63346a8
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb63346a8, CDB 0xb63346d8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=5
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fffe60, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x9, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b63346a8
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb63346a8, status 1
AtapiInterrupt: RequestComplete, srb 0xb63346a8
AtapiInterrupt: NextRequest, srb=0xb5f1da68
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f1da68, CDB 0xb5f1da98, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=4
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fed730, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x9, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f1da68
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
err:(win32ss/user/user32/misc/dllmain.c:601) hIconSmWindows 00020064 hIconWindows 00020062 
(win32ss/user/ntuser/callback.c:1138) err: hIconSmWindows 00020064 hIconWindows 00020062 
(win32ss/user/ntuser/desktop.c:3221) err: Attempted to change thread desktop although the thread has windows!
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f1da68, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f1da68
AtapiInterrupt: NextRequest, srb=0xb5f1d298
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f1d298, CDB 0xb5f1d2c8, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf709439c
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fed7b0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x9, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f1d298
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f1d298, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f1d298
AtapiInterrupt: NextRequest, srb=0xb5f1cfc0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f1cfc0, CDB 0xb5f1cff0, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf70940fc
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fed830, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x9, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f1cfc0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f1cfc0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f1cfc0
AtapiInterrupt: NextRequest, srb=0xb5f1cde0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f1cde0, CDB 0xb5f1ce10, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf70940fc
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fed8b0, Count 0x13(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x3, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f1cde0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1300, WordsLeft 1300
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2600, full size 2600
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f1cde0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f1cde0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb
(drivers/usb/usbehci/hardware.cpp:1321) CStatus b
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb63346a8, CDB 0xb63346d8, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb63346a8
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704b60c
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fed730, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fed730, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:260fb000
  ph data[0]=0:260fb000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:260dc000
  set TERM
  ph data[1]=0:260dc000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fed730, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x2, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b63346a8
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6fdb600
** Ide: Command AtaReq 0xb6777018
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fe1120, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fe1120, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f6c58000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f6c58000)
AtapiVirtToPhysAddr_: f6c58000 -> 00000000:26168000
  ph data[0]=0:26168000 (fff)
  get Phys(data[n=1+1000]=f6c59000)
AtapiVirtToPhysAddr_: f6c59000 -> 00000000:26159000
  ph data[1]=0:26159000 (fff)
  get Phys(data[n=2+1000]=f6c5a000)
AtapiVirtToPhysAddr_: f6c5a000 -> 00000000:26162000
  ph data[2]=0:26162000 (fff)
  get Phys(data[n=3+1000]=f6c5b000)
AtapiVirtToPhysAddr_: f6c5b000 -> 00000000:26163000
  ph data[2]=0:26162000 (1fff)
  get Phys(data[n=3+2000]=f6c5c000)
AtapiVirtToPhysAddr_: f6c5c000 -> 00000000:2614c000
  ph data[3]=0:2614c000 (fff)
  get Phys(data[n=4+1000]=f6c5d000)
AtapiVirtToPhysAddr_: f6c5d000 -> 00000000:2616d000
  ph data[4]=0:2616d000 (fff)
  get Phys(data[n=5+1000]=f6c5e000)
AtapiVirtToPhysAddr_: f6c5e000 -> 00000000:2615e000
  ph data[5]=0:2615e000 (fff)
  get Phys(data[n=6+1000]=f6c5f000)
AtapiVirtToPhysAddr_: f6c5f000 -> 00000000:26167000
  ph data[6]=0:26167000 (fff)
  get Phys(data[n=7+1000]=f6c60000)
AtapiVirtToPhysAddr_: f6c60000 -> 00000000:26170000
  ph data[7]=0:26170000 (fff)
  get Phys(data[n=8+1000]=f6c61000)
AtapiVirtToPhysAddr_: f6c61000 -> 00000000:26161000
  ph data[8]=0:26161000 (fff)
  get Phys(data[n=9+1000]=f6c62000)
AtapiVirtToPhysAddr_: f6c62000 -> 00000000:2616a000
  ph data[9]=0:2616a000 (fff)
  get Phys(data[n=10+1000]=f6c63000)
AtapiVirtToPhysAddr_: f6c63000 -> 00000000:2616b000
  ph data[9]=0:2616a000 (1fff)
  get Phys(data[n=10+2000]=f6c64000)
AtapiVirtToPhysAddr_: f6c64000 -> 00000000:26154000
  ph data[10]=0:26154000 (fff)
  get Phys(data[n=11+1000]=f6c65000)
AtapiVirtToPhysAddr_: f6c65000 -> 00000000:26175000
  ph data[11]=0:26175000 (fff)
  get Phys(data[n=12+1000]=f6c66000)
AtapiVirtToPhysAddr_: f6c66000 -> 00000000:26166000
  ph data[12]=0:26166000 (fff)
  get Phys(data[n=13+1000]=f6c67000)
AtapiVirtToPhysAddr_: f6c67000 -> 00000000:2616f000
  set TERM
  ph data[13]=0:2616f000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6fdb600
** Ide: Command AtaReq 0xb6779048
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fe11a0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fe11a0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f6c68000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f6c68000)
AtapiVirtToPhysAddr_: f6c68000 -> 00000000:26178000
  ph data[0]=0:26178000 (fff)
  get Phys(data[n=1+1000]=f6c69000)
AtapiVirtToPhysAddr_: f6c69000 -> 00000000:26169000
  ph data[1]=0:26169000 (fff)
  get Phys(data[n=2+1000]=f6c6a000)
AtapiVirtToPhysAddr_: f6c6a000 -> 00000000:26172000
  ph data[2]=0:26172000 (fff)
  get Phys(data[n=3+1000]=f6c6b000)
AtapiVirtToPhysAddr_: f6c6b000 -> 00000000:26173000
  ph data[2]=0:26172000 (1fff)
  get Phys(data[n=3+2000]=f6c6c000)
AtapiVirtToPhysAddr_: f6c6c000 -> 00000000:2615c000
  ph data[3]=0:2615c000 (fff)
  get Phys(data[n=4+1000]=f6c6d000)
AtapiVirtToPhysAddr_: f6c6d000 -> 00000000:2617d000
  ph data[4]=0:2617d000 (fff)
  get Phys(data[n=5+1000]=f6c6e000)
AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:2616e000
  ph data[5]=0:2616e000 (fff)
  get Phys(data[n=6+1000]=f6c6f000)
AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:26177000
  ph data[6]=0:26177000 (fff)
  get Phys(data[n=7+1000]=f6c70000)
AtapiVirtToPhysAddr_: f6c70000 -> 00000000:26180000
  ph data[7]=0:26180000 (fff)
  get Phys(data[n=8+1000]=f6c71000)
AtapiVirtToPhysAddr_: f6c71000 -> 00000000:26171000
  ph data[8]=0:26171000 (fff)
  get Phys(data[n=9+1000]=f6c72000)
AtapiVirtToPhysAddr_: f6c72000 -> 00000000:2617a000
  ph data[9]=0:2617a000 (fff)
  get Phys(data[n=10+1000]=f6c73000)
AtapiVirtToPhysAddr_: f6c73000 -> 00000000:2617b000
  ph data[9]=0:2617a000 (1fff)
  get Phys(data[n=10+2000]=f6c74000)
AtapiVirtToPhysAddr_: f6c74000 -> 00000000:26164000
  ph data[10]=0:26164000 (fff)
  get Phys(data[n=11+1000]=f6c75000)
AtapiVirtToPhysAddr_: f6c75000 -> 00000000:26185000
  ph data[11]=0:26185000 (fff)
  get Phys(data[n=12+1000]=f6c76000)
AtapiVirtToPhysAddr_: f6c76000 -> 00000000:26176000
  ph data[12]=0:26176000 (fff)
  get Phys(data[n=13+1000]=f6c77000)
AtapiVirtToPhysAddr_: f6c77000 -> 00000000:2617f000
  set TERM
  ph data[13]=0:2617f000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6fdb600
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fe1220, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fe1220, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6c78000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6c78000)
AtapiVirtToPhysAddr_: f6c78000 -> 00000000:26188000
  ph data[0]=0:26188000 (fff)
  get Phys(data[n=1+1000]=f6c79000)
AtapiVirtToPhysAddr_: f6c79000 -> 00000000:26179000
  ph data[1]=0:26179000 (fff)
  get Phys(data[n=2+1000]=f6c7a000)
AtapiVirtToPhysAddr_: f6c7a000 -> 00000000:26182000
  ph data[2]=0:26182000 (fff)
  get Phys(data[n=3+1000]=f6c7b000)
AtapiVirtToPhysAddr_: f6c7b000 -> 00000000:26183000
  ph data[2]=0:26182000 (1fff)
  get Phys(data[n=3+2000]=f6c7c000)
AtapiVirtToPhysAddr_: f6c7c000 -> 00000000:2616c000
  ph data[3]=0:2616c000 (fff)
  get Phys(data[n=4+1000]=f6c7d000)
AtapiVirtToPhysAddr_: f6c7d000 -> 00000000:2618d000
  ph data[4]=0:2618d000 (fff)
  get Phys(data[n=5+1000]=f6c7e000)
AtapiVirtToPhysAddr_: f6c7e000 -> 00000000:2617e000
  ph data[5]=0:2617e000 (fff)
  get Phys(data[n=6+1000]=f6c7f000)
AtapiVirtToPhysAddr_: f6c7f000 -> 00000000:26187000
  ph data[6]=0:26187000 (fff)
  get Phys(data[n=7+1000]=f6c80000)
AtapiVirtToPhysAddr_: f6c80000 -> 00000000:26190000
  ph data[7]=0:26190000 (fff)
  get Phys(data[n=8+1000]=f6c81000)
AtapiVirtToPhysAddr_: f6c81000 -> 00000000:26181000
  ph data[8]=0:26181000 (fff)
  get Phys(data[n=9+1000]=f6c82000)
AtapiVirtToPhysAddr_: f6c82000 -> 00000000:2618a000
  ph data[9]=0:2618a000 (fff)
  get Phys(data[n=10+1000]=f6c83000)
AtapiVirtToPhysAddr_: f6c83000 -> 00000000:2618b000
  ph data[9]=0:2618a000 (1fff)
  get Phys(data[n=10+2000]=f6c84000)
AtapiVirtToPhysAddr_: f6c84000 -> 00000000:26174000
  ph data[10]=0:26174000 (fff)
  get Phys(data[n=11+1000]=f6c85000)
AtapiVirtToPhysAddr_: f6c85000 -> 00000000:26195000
  ph data[11]=0:26195000 (fff)
  get Phys(data[n=12+1000]=f6c86000)
AtapiVirtToPhysAddr_: f6c86000 -> 00000000:26186000
  ph data[12]=0:26186000 (fff)
  get Phys(data[n=13+1000]=f6c87000)
AtapiVirtToPhysAddr_: f6c87000 -> 00000000:2618f000
  set TERM
  ph data[13]=0:2618f000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f1d298, CDB 0xb5f1d2c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=4
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6fdb600
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fe12a0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fe12a0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6c88000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6c88000)
AtapiVirtToPhysAddr_: f6c88000 -> 00000000:26198000
  ph data[0]=0:26198000 (fff)
  get Phys(data[n=1+1000]=f6c89000)
AtapiVirtToPhysAddr_: f6c89000 -> 00000000:26189000
  ph data[1]=0:26189000 (fff)
  get Phys(data[n=2+1000]=f6c8a000)
AtapiVirtToPhysAddr_: f6c8a000 -> 00000000:26192000
  ph data[2]=0:26192000 (fff)
  get Phys(data[n=3+1000]=f6c8b000)
AtapiVirtToPhysAddr_: f6c8b000 -> 00000000:26193000
  ph data[2]=0:26192000 (1fff)
  get Phys(data[n=3+2000]=f6c8c000)
AtapiVirtToPhysAddr_: f6c8c000 -> 00000000:2617c000
  ph data[3]=0:2617c000 (fff)
  get Phys(data[n=4+1000]=f6c8d000)
AtapiVirtToPhysAddr_: f6c8d000 -> 00000000:2619d000
  ph data[4]=0:2619d000 (fff)
  get Phys(data[n=5+1000]=f6c8e000)
AtapiVirtToPhysAddr_: f6c8e000 -> 00000000:2618e000
  ph data[5]=0:2618e000 (fff)
  get Phys(data[n=6+1000]=f6c8f000)
AtapiVirtToPhysAddr_: f6c8f000 -> 00000000:26197000
  ph data[6]=0:26197000 (fff)
  get Phys(data[n=7+1000]=f6c90000)
AtapiVirtToPhysAddr_: f6c90000 -> 00000000:261a0000
  ph data[7]=0:261a0000 (fff)
  get Phys(data[n=8+1000]=f6c91000)
AtapiVirtToPhysAddr_: f6c91000 -> 00000000:26191000
  ph data[8]=0:26191000 (fff)
  get Phys(data[n=9+1000]=f6c92000)
AtapiVirtToPhysAddr_: f6c92000 -> 00000000:2619a000
  ph data[9]=0:2619a000 (fff)
  get Phys(data[n=10+1000]=f6c93000)
AtapiVirtToPhysAddr_: f6c93000 -> 00000000:2619b000
  ph data[9]=0:2619a000 (1fff)
  get Phys(data[n=10+2000]=f6c94000)
AtapiVirtToPhysAddr_: f6c94000 -> 00000000:26184000
  ph data[10]=0:26184000 (fff)
  get Phys(data[n=11+1000]=f6c95000)
AtapiVirtToPhysAddr_: f6c95000 -> 00000000:261a5000
  ph data[11]=0:261a5000 (fff)
  get Phys(data[n=12+1000]=f6c96000)
AtapiVirtToPhysAddr_: f6c96000 -> 00000000:26196000
  ph data[12]=0:26196000 (fff)
  get Phys(data[n=13+1000]=f6c97000)
AtapiVirtToPhysAddr_: f6c97000 -> 00000000:2619f000
  set TERM
  ph data[13]=0:2619f000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 5 request(s)!
AtapiStartIo: next Srb b5f1d298
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f1da68, CDB 0xb5f1da98, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=5
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6fbb5c0
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39008170, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39008170, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f6c18000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f6c18000)
AtapiVirtToPhysAddr_: f6c18000 -> 00000000:27461000
  ph data[0]=0:27461000 (fff)
  get Phys(data[n=1+1000]=f6c19000)
AtapiVirtToPhysAddr_: f6c19000 -> 00000000:27462000
  ph data[0]=0:27461000 (1fff)
  get Phys(data[n=1+2000]=f6c1a000)
AtapiVirtToPhysAddr_: f6c1a000 -> 00000000:27463000
  ph data[0]=0:27461000 (2fff)
  get Phys(data[n=1+3000]=f6c1b000)
AtapiVirtToPhysAddr_: f6c1b000 -> 00000000:2746c000
  ph data[1]=0:2746c000 (fff)
  get Phys(data[n=2+1000]=f6c1c000)
AtapiVirtToPhysAddr_: f6c1c000 -> 00000000:2746d000
  ph data[1]=0:2746c000 (1fff)
  get Phys(data[n=2+2000]=f6c1d000)
AtapiVirtToPhysAddr_: f6c1d000 -> 00000000:27466000
  ph data[2]=0:27466000 (fff)
  get Phys(data[n=3+1000]=f6c1e000)
AtapiVirtToPhysAddr_: f6c1e000 -> 00000000:2745f000
  ph data[3]=0:2745f000 (fff)
  get Phys(data[n=4+1000]=f6c1f000)
AtapiVirtToPhysAddr_: f6c1f000 -> 00000000:27468000
  ph data[4]=0:27468000 (fff)
  get Phys(data[n=5+1000]=f6c20000)
AtapiVirtToPhysAddr_: f6c20000 -> 00000000:27469000
  ph data[4]=0:27468000 (1fff)
  get Phys(data[n=5+2000]=f6c21000)
AtapiVirtToPhysAddr_: f6c21000 -> 00000000:2746a000
  ph data[4]=0:27468000 (2fff)
  get Phys(data[n=5+3000]=f6c22000)
AtapiVirtToPhysAddr_: f6c22000 -> 00000000:2746b000
  ph data[4]=0:27468000 (3fff)
  get Phys(data[n=5+4000]=f6c23000)
AtapiVirtToPhysAddr_: f6c23000 -> 00000000:27474000
  ph data[5]=0:27474000 (fff)
  get Phys(data[n=6+1000]=f6c24000)
AtapiVirtToPhysAddr_: f6c24000 -> 00000000:27475000
  ph data[5]=0:27474000 (1fff)
  get Phys(data[n=6+2000]=f6c25000)
AtapiVirtToPhysAddr_: f6c25000 -> 00000000:2746e000
  ph data[6]=0:2746e000 (fff)
  get Phys(data[n=7+1000]=f6c26000)
AtapiVirtToPhysAddr_: f6c26000 -> 00000000:27467000
  ph data[7]=0:27467000 (fff)
  get Phys(data[n=8+1000]=f6c27000)
AtapiVirtToPhysAddr_: f6c27000 -> 00000000:27470000
  set TERM
  ph data[8]=0:27470000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 6 request(s)!
AtapiStartIo: next Srb b5f1da68
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f17470, CDB 0xb5f174a0, AtaReq 0xb6778030, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=6
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6fbb5c0
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 390081f0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390081f0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f6c28000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f6c28000)
AtapiVirtToPhysAddr_: f6c28000 -> 00000000:27471000
  ph data[0]=0:27471000 (fff)
  get Phys(data[n=1+1000]=f6c29000)
AtapiVirtToPhysAddr_: f6c29000 -> 00000000:27472000
  ph data[0]=0:27471000 (1fff)
  get Phys(data[n=1+2000]=f6c2a000)
AtapiVirtToPhysAddr_: f6c2a000 -> 00000000:27473000
  ph data[0]=0:27471000 (2fff)
  get Phys(data[n=1+3000]=f6c2b000)
AtapiVirtToPhysAddr_: f6c2b000 -> 00000000:2747c000
  ph data[1]=0:2747c000 (fff)
  get Phys(data[n=2+1000]=f6c2c000)
AtapiVirtToPhysAddr_: f6c2c000 -> 00000000:2747d000
  ph data[1]=0:2747c000 (1fff)
  get Phys(data[n=2+2000]=f6c2d000)
AtapiVirtToPhysAddr_: f6c2d000 -> 00000000:27476000
  ph data[2]=0:27476000 (fff)
  get Phys(data[n=3+1000]=f6c2e000)
AtapiVirtToPhysAddr_: f6c2e000 -> 00000000:2746f000
  ph data[3]=0:2746f000 (fff)
  get Phys(data[n=4+1000]=f6c2f000)
AtapiVirtToPhysAddr_: f6c2f000 -> 00000000:27478000
  ph data[4]=0:27478000 (fff)
  get Phys(data[n=5+1000]=f6c30000)
AtapiVirtToPhysAddr_: f6c30000 -> 00000000:27479000
  ph data[4]=0:27478000 (1fff)
  get Phys(data[n=5+2000]=f6c31000)
AtapiVirtToPhysAddr_: f6c31000 -> 00000000:2747a000
  ph data[4]=0:27478000 (2fff)
  get Phys(data[n=5+3000]=f6c32000)
AtapiVirtToPhysAddr_: f6c32000 -> 00000000:2747b000
  ph data[4]=0:27478000 (3fff)
  get Phys(data[n=5+4000]=f6c33000)
AtapiVirtToPhysAddr_: f6c33000 -> 00000000:27484000
  ph data[5]=0:27484000 (fff)
  get Phys(data[n=6+1000]=f6c34000)
AtapiVirtToPhysAddr_: f6c34000 -> 00000000:27485000
  ph data[5]=0:27484000 (1fff)
  get Phys(data[n=6+2000]=f6c35000)
AtapiVirtToPhysAddr_: f6c35000 -> 00000000:2747e000
  ph data[6]=0:2747e000 (fff)
  get Phys(data[n=7+1000]=f6c36000)
AtapiVirtToPhysAddr_: f6c36000 -> 00000000:27477000
  ph data[7]=0:27477000 (fff)
  get Phys(data[n=8+1000]=f6c37000)
AtapiVirtToPhysAddr_: f6c37000 -> 00000000:27480000
  set TERM
  ph data[8]=0:27480000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 7 request(s)!
AtapiStartIo: next Srb b5f17470
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f163d8, CDB 0xb5f16408, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=7
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6fbb5c0
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39008270, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39008270, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f6c38000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f6c38000)
AtapiVirtToPhysAddr_: f6c38000 -> 00000000:27481000
  ph data[0]=0:27481000 (fff)
  get Phys(data[n=1+1000]=f6c39000)
AtapiVirtToPhysAddr_: f6c39000 -> 00000000:27482000
  ph data[0]=0:27481000 (1fff)
  get Phys(data[n=1+2000]=f6c3a000)
AtapiVirtToPhysAddr_: f6c3a000 -> 00000000:27483000
  ph data[0]=0:27481000 (2fff)
  get Phys(data[n=1+3000]=f6c3b000)
AtapiVirtToPhysAddr_: f6c3b000 -> 00000000:2748c000
  ph data[1]=0:2748c000 (fff)
  get Phys(data[n=2+1000]=f6c3c000)
AtapiVirtToPhysAddr_: f6c3c000 -> 00000000:2748d000
  ph data[1]=0:2748c000 (1fff)
  get Phys(data[n=2+2000]=f6c3d000)
AtapiVirtToPhysAddr_: f6c3d000 -> 00000000:27486000
  ph data[2]=0:27486000 (fff)
  get Phys(data[n=3+1000]=f6c3e000)
AtapiVirtToPhysAddr_: f6c3e000 -> 00000000:2747f000
  ph data[3]=0:2747f000 (fff)
  get Phys(data[n=4+1000]=f6c3f000)
AtapiVirtToPhysAddr_: f6c3f000 -> 00000000:27488000
  ph data[4]=0:27488000 (fff)
  get Phys(data[n=5+1000]=f6c40000)
AtapiVirtToPhysAddr_: f6c40000 -> 00000000:27489000
  ph data[4]=0:27488000 (1fff)
  get Phys(data[n=5+2000]=f6c41000)
AtapiVirtToPhysAddr_: f6c41000 -> 00000000:2748a000
  ph data[4]=0:27488000 (2fff)
  get Phys(data[n=5+3000]=f6c42000)
AtapiVirtToPhysAddr_: f6c42000 -> 00000000:2748b000
  ph data[4]=0:27488000 (3fff)
  get Phys(data[n=5+4000]=f6c43000)
AtapiVirtToPhysAddr_: f6c43000 -> 00000000:27494000
  ph data[5]=0:27494000 (fff)
  get Phys(data[n=6+1000]=f6c44000)
AtapiVirtToPhysAddr_: f6c44000 -> 00000000:27495000
  ph data[5]=0:27494000 (1fff)
  get Phys(data[n=6+2000]=f6c45000)
AtapiVirtToPhysAddr_: f6c45000 -> 00000000:2748e000
  ph data[6]=0:2748e000 (fff)
  get Phys(data[n=7+1000]=f6c46000)
AtapiVirtToPhysAddr_: f6c46000 -> 00000000:27487000
  ph data[7]=0:27487000 (fff)
  get Phys(data[n=8+1000]=f6c47000)
AtapiVirtToPhysAddr_: f6c47000 -> 00000000:27490000
  set TERM
  ph data[8]=0:27490000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 8 request(s)!
AtapiStartIo: next Srb b5f163d8
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f16390, CDB 0xb5f163c0, AtaReq 0xb677e0c0, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=8
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6fbb5c0
** Ide: Command AtaReq 0xb677e0c0
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 390082f0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390082f0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677e0c0: cmd aligned b677e180, d=60
  ahci_cmd_ptr 0xb677e180
AtapiDmaSetup: mode 0x0, data f6c48000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677e180)
AtapiVirtToPhysAddr_: b677e180 -> 00000000:08e41180
  get Phys(data[0]=f6c48000)
AtapiVirtToPhysAddr_: f6c48000 -> 00000000:27491000
  ph data[0]=0:27491000 (fff)
  get Phys(data[n=1+1000]=f6c49000)
AtapiVirtToPhysAddr_: f6c49000 -> 00000000:27492000
  ph data[0]=0:27491000 (1fff)
  get Phys(data[n=1+2000]=f6c4a000)
AtapiVirtToPhysAddr_: f6c4a000 -> 00000000:27493000
  ph data[0]=0:27491000 (2fff)
  get Phys(data[n=1+3000]=f6c4b000)
AtapiVirtToPhysAddr_: f6c4b000 -> 00000000:2749c000
  ph data[1]=0:2749c000 (fff)
  get Phys(data[n=2+1000]=f6c4c000)
AtapiVirtToPhysAddr_: f6c4c000 -> 00000000:2749d000
  ph data[1]=0:2749c000 (1fff)
  get Phys(data[n=2+2000]=f6c4d000)
AtapiVirtToPhysAddr_: f6c4d000 -> 00000000:27496000
  ph data[2]=0:27496000 (fff)
  get Phys(data[n=3+1000]=f6c4e000)
AtapiVirtToPhysAddr_: f6c4e000 -> 00000000:2748f000
  ph data[3]=0:2748f000 (fff)
  get Phys(data[n=4+1000]=f6c4f000)
AtapiVirtToPhysAddr_: f6c4f000 -> 00000000:27498000
  ph data[4]=0:27498000 (fff)
  get Phys(data[n=5+1000]=f6c50000)
AtapiVirtToPhysAddr_: f6c50000 -> 00000000:27499000
  ph data[4]=0:27498000 (1fff)
  get Phys(data[n=5+2000]=f6c51000)
AtapiVirtToPhysAddr_: f6c51000 -> 00000000:2749a000
  ph data[4]=0:27498000 (2fff)
  get Phys(data[n=5+3000]=f6c52000)
AtapiVirtToPhysAddr_: f6c52000 -> 00000000:2749b000
  ph data[4]=0:27498000 (3fff)
  get Phys(data[n=5+4000]=f6c53000)
AtapiVirtToPhysAddr_: f6c53000 -> 00000000:274a4000
  ph data[5]=0:274a4000 (fff)
  get Phys(data[n=6+1000]=f6c54000)
AtapiVirtToPhysAddr_: f6c54000 -> 00000000:274a5000
  ph data[5]=0:274a4000 (1fff)
  get Phys(data[n=6+2000]=f6c55000)
AtapiVirtToPhysAddr_: f6c55000 -> 00000000:2749e000
  ph data[6]=0:2749e000 (fff)
  get Phys(data[n=7+1000]=f6c56000)
AtapiVirtToPhysAddr_: f6c56000 -> 00000000:27497000
  ph data[7]=0:27497000 (fff)
  get Phys(data[n=8+1000]=f6c57000)
AtapiVirtToPhysAddr_: f6c57000 -> 00000000:274a0000
  set TERM
  ph data[8]=0:274a0000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677e180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 9 request(s)!
AtapiStartIo: next Srb b5f16390
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb63346a8, status 1
AtapiInterrupt: RequestComplete, srb 0xb63346a8
AtapiInterrupt: NextRequest, srb=0xb6346750
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: qd=8
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fe1120, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0xe, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb63346a8, CDB 0xb63346d8, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=8
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704b1e0
** Ide: Command AtaReq 0xb677b078
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fe7790, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fe7790, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f6bd8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f6bd8000)
AtapiVirtToPhysAddr_: f6bd8000 -> 00000000:1f399000
  ph data[0]=0:1f399000 (fff)
  get Phys(data[n=1+1000]=f6bd9000)
AtapiVirtToPhysAddr_: f6bd9000 -> 00000000:1f39a000
  ph data[0]=0:1f399000 (1fff)
  get Phys(data[n=1+2000]=f6bda000)
AtapiVirtToPhysAddr_: f6bda000 -> 00000000:1f3a3000
  ph data[1]=0:1f3a3000 (fff)
  get Phys(data[n=2+1000]=f6bdb000)
AtapiVirtToPhysAddr_: f6bdb000 -> 00000000:1f39c000
  ph data[2]=0:1f39c000 (fff)
  get Phys(data[n=3+1000]=f6bdc000)
AtapiVirtToPhysAddr_: f6bdc000 -> 00000000:1f3a5000
  ph data[3]=0:1f3a5000 (fff)
  get Phys(data[n=4+1000]=f6bdd000)
AtapiVirtToPhysAddr_: f6bdd000 -> 00000000:1f39e000
  ph data[4]=0:1f39e000 (fff)
  get Phys(data[n=5+1000]=f6bde000)
AtapiVirtToPhysAddr_: f6bde000 -> 00000000:1f39f000
  ph data[4]=0:1f39e000 (1fff)
  get Phys(data[n=5+2000]=f6bdf000)
AtapiVirtToPhysAddr_: f6bdf000 -> 00000000:1f3a0000
  ph data[4]=0:1f39e000 (2fff)
  get Phys(data[n=5+3000]=f6be0000)
AtapiVirtToPhysAddr_: f6be0000 -> 00000000:1f3a1000
  ph data[4]=0:1f39e000 (3fff)
  get Phys(data[n=5+4000]=f6be1000)
AtapiVirtToPhysAddr_: f6be1000 -> 00000000:1f3a2000
  ph data[4]=0:1f39e000 (4fff)
  get Phys(data[n=5+5000]=f6be2000)
AtapiVirtToPhysAddr_: f6be2000 -> 00000000:1f3ab000
  ph data[5]=0:1f3ab000 (fff)
  get Phys(data[n=6+1000]=f6be3000)
AtapiVirtToPhysAddr_: f6be3000 -> 00000000:1f3a4000
  ph data[6]=0:1f3a4000 (fff)
  get Phys(data[n=7+1000]=f6be4000)
AtapiVirtToPhysAddr_: f6be4000 -> 00000000:1f3ad000
  ph data[7]=0:1f3ad000 (fff)
  get Phys(data[n=8+1000]=f6be5000)
AtapiVirtToPhysAddr_: f6be5000 -> 00000000:1f3a6000
  ph data[8]=0:1f3a6000 (fff)
  get Phys(data[n=9+1000]=f6be6000)
AtapiVirtToPhysAddr_: f6be6000 -> 00000000:1f3a7000
  ph data[8]=0:1f3a6000 (1fff)
  get Phys(data[n=9+2000]=f6be7000)
AtapiVirtToPhysAddr_: f6be7000 -> 00000000:1f3a8000
  set TERM
  ph data[8]=0:1f3a6000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 9 request(s)!
AtapiStartIo: next Srb b63346a8
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f15218, CDB 0xb5f15248, AtaReq 0xb677f0d8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=9
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704b1e0
** Ide: Command AtaReq 0xb677f0d8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fe7810, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fe7810, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677f0d8: cmd aligned b677f180, d=48
  ahci_cmd_ptr 0xb677f180
AtapiDmaSetup: mode 0x0, data f6be8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677f180)
AtapiVirtToPhysAddr_: b677f180 -> 00000000:08e42180
  get Phys(data[0]=f6be8000)
AtapiVirtToPhysAddr_: f6be8000 -> 00000000:1f3a9000
  ph data[0]=0:1f3a9000 (fff)
  get Phys(data[n=1+1000]=f6be9000)
AtapiVirtToPhysAddr_: f6be9000 -> 00000000:1f3aa000
  ph data[0]=0:1f3a9000 (1fff)
  get Phys(data[n=1+2000]=f6bea000)
AtapiVirtToPhysAddr_: f6bea000 -> 00000000:1f3b3000
  ph data[1]=0:1f3b3000 (fff)
  get Phys(data[n=2+1000]=f6beb000)
AtapiVirtToPhysAddr_: f6beb000 -> 00000000:1f3ac000
  ph data[2]=0:1f3ac000 (fff)
  get Phys(data[n=3+1000]=f6bec000)
AtapiVirtToPhysAddr_: f6bec000 -> 00000000:1f3b5000
  ph data[3]=0:1f3b5000 (fff)
  get Phys(data[n=4+1000]=f6bed000)
AtapiVirtToPhysAddr_: f6bed000 -> 00000000:1f3ae000
  ph data[4]=0:1f3ae000 (fff)
  get Phys(data[n=5+1000]=f6bee000)
AtapiVirtToPhysAddr_: f6bee000 -> 00000000:1f3af000
  ph data[4]=0:1f3ae000 (1fff)
  get Phys(data[n=5+2000]=f6bef000)
AtapiVirtToPhysAddr_: f6bef000 -> 00000000:1f3b0000
  ph data[4]=0:1f3ae000 (2fff)
  get Phys(data[n=5+3000]=f6bf0000)
AtapiVirtToPhysAddr_: f6bf0000 -> 00000000:1f3b1000
  ph data[4]=0:1f3ae000 (3fff)
  get Phys(data[n=5+4000]=f6bf1000)
AtapiVirtToPhysAddr_: f6bf1000 -> 00000000:1f3b2000
  ph data[4]=0:1f3ae000 (4fff)
  get Phys(data[n=5+5000]=f6bf2000)
AtapiVirtToPhysAddr_: f6bf2000 -> 00000000:1f3bb000
  ph data[5]=0:1f3bb000 (fff)
  get Phys(data[n=6+1000]=f6bf3000)
AtapiVirtToPhysAddr_: f6bf3000 -> 00000000:1f3b4000
  ph data[6]=0:1f3b4000 (fff)
  get Phys(data[n=7+1000]=f6bf4000)
AtapiVirtToPhysAddr_: f6bf4000 -> 00000000:1f3bd000
  ph data[7]=0:1f3bd000 (fff)
  get Phys(data[n=8+1000]=f6bf5000)
AtapiVirtToPhysAddr_: f6bf5000 -> 00000000:1f3b6000
  ph data[8]=0:1f3b6000 (fff)
  get Phys(data[n=9+1000]=f6bf6000)
AtapiVirtToPhysAddr_: f6bf6000 -> 00000000:1f3b7000
  ph data[8]=0:1f3b6000 (1fff)
  get Phys(data[n=9+2000]=f6bf7000)
AtapiVirtToPhysAddr_: f6bf7000 -> 00000000:1f3b8000
  set TERM
  ph data[8]=0:1f3b6000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677f180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 10 request(s)!
AtapiStartIo: next Srb b5f15218
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f13830, CDB 0xb5f13860, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=a
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704b1e0
** Ide: Command AtaReq 0xb67800f0
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fe7890, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fe7890, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb67800f0: cmd aligned b6780180, d=30
  ahci_cmd_ptr 0xb6780180
AtapiDmaSetup: mode 0x0, data f6bf8000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6780180)
AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180
  get Phys(data[0]=f6bf8000)
AtapiVirtToPhysAddr_: f6bf8000 -> 00000000:1f3b9000
  ph data[0]=0:1f3b9000 (fff)
  get Phys(data[n=1+1000]=f6bf9000)
AtapiVirtToPhysAddr_: f6bf9000 -> 00000000:1f3ba000
  ph data[0]=0:1f3b9000 (1fff)
  get Phys(data[n=1+2000]=f6bfa000)
AtapiVirtToPhysAddr_: f6bfa000 -> 00000000:1f3c3000
  ph data[1]=0:1f3c3000 (fff)
  get Phys(data[n=2+1000]=f6bfb000)
AtapiVirtToPhysAddr_: f6bfb000 -> 00000000:1f3bc000
  ph data[2]=0:1f3bc000 (fff)
  get Phys(data[n=3+1000]=f6bfc000)
AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:1f3c5000
  ph data[3]=0:1f3c5000 (fff)
  get Phys(data[n=4+1000]=f6bfd000)
AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:1f3be000
  ph data[4]=0:1f3be000 (fff)
  get Phys(data[n=5+1000]=f6bfe000)
AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:1f3bf000
  ph data[4]=0:1f3be000 (1fff)
  get Phys(data[n=5+2000]=f6bff000)
AtapiVirtToPhysAddr_: f6bff000 -> 00000000:1f3c0000
  ph data[4]=0:1f3be000 (2fff)
  get Phys(data[n=5+3000]=f6c00000)
AtapiVirtToPhysAddr_: f6c00000 -> 00000000:1f3c1000
  ph data[4]=0:1f3be000 (3fff)
  get Phys(data[n=5+4000]=f6c01000)
AtapiVirtToPhysAddr_: f6c01000 -> 00000000:1f3c2000
  ph data[4]=0:1f3be000 (4fff)
  get Phys(data[n=5+5000]=f6c02000)
AtapiVirtToPhysAddr_: f6c02000 -> 00000000:1f3cb000
  ph data[5]=0:1f3cb000 (fff)
  get Phys(data[n=6+1000]=f6c03000)
AtapiVirtToPhysAddr_: f6c03000 -> 00000000:1f3c4000
  ph data[6]=0:1f3c4000 (fff)
  get Phys(data[n=7+1000]=f6c04000)
AtapiVirtToPhysAddr_: f6c04000 -> 00000000:1f3cd000
  ph data[7]=0:1f3cd000 (fff)
  get Phys(data[n=8+1000]=f6c05000)
AtapiVirtToPhysAddr_: f6c05000 -> 00000000:1f3c6000
  ph data[8]=0:1f3c6000 (fff)
  get Phys(data[n=9+1000]=f6c06000)
AtapiVirtToPhysAddr_: f6c06000 -> 00000000:1f3c7000
  ph data[8]=0:1f3c6000 (1fff)
  get Phys(data[n=9+2000]=f6c07000)
AtapiVirtToPhysAddr_: f6c07000 -> 00000000:1f3c8000
  set TERM
  ph data[8]=0:1f3c6000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6780180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 11 request(s)!
AtapiStartIo: next Srb b5f13830
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f13650, CDB 0xb5f13680, AtaReq 0xb6781108, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=b
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704b1e0
** Ide: Command AtaReq 0xb6781108
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fe7910, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fe7910, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6781108: cmd aligned b6781180, d=18
  ahci_cmd_ptr 0xb6781180
AtapiDmaSetup: mode 0x0, data f6c08000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6781180)
AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180
  get Phys(data[0]=f6c08000)
AtapiVirtToPhysAddr_: f6c08000 -> 00000000:1f3c9000
  ph data[0]=0:1f3c9000 (fff)
  get Phys(data[n=1+1000]=f6c09000)
AtapiVirtToPhysAddr_: f6c09000 -> 00000000:1f3ca000
  ph data[0]=0:1f3c9000 (1fff)
  get Phys(data[n=1+2000]=f6c0a000)
AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:1f3d3000
  ph data[1]=0:1f3d3000 (fff)
  get Phys(data[n=2+1000]=f6c0b000)
AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:1f3cc000
  ph data[2]=0:1f3cc000 (fff)
  get Phys(data[n=3+1000]=f6c0c000)
AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:1f3d5000
  ph data[3]=0:1f3d5000 (fff)
  get Phys(data[n=4+1000]=f6c0d000)
AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:1f3ce000
  ph data[4]=0:1f3ce000 (fff)
  get Phys(data[n=5+1000]=f6c0e000)
AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:1f3cf000
  ph data[4]=0:1f3ce000 (1fff)
  get Phys(data[n=5+2000]=f6c0f000)
AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:1f3d0000
  ph data[4]=0:1f3ce000 (2fff)
  get Phys(data[n=5+3000]=f6c10000)
AtapiVirtToPhysAddr_: f6c10000 -> 00000000:1f3d1000
  ph data[4]=0:1f3ce000 (3fff)
  get Phys(data[n=5+4000]=f6c11000)
AtapiVirtToPhysAddr_: f6c11000 -> 00000000:1f3d2000
  ph data[4]=0:1f3ce000 (4fff)
  get Phys(data[n=5+5000]=f6c12000)
AtapiVirtToPhysAddr_: f6c12000 -> 00000000:1f3db000
  ph data[5]=0:1f3db000 (fff)
  get Phys(data[n=6+1000]=f6c13000)
AtapiVirtToPhysAddr_: f6c13000 -> 00000000:1f3d4000
  ph data[6]=0:1f3d4000 (fff)
  get Phys(data[n=7+1000]=f6c14000)
AtapiVirtToPhysAddr_: f6c14000 -> 00000000:1f3dd000
  ph data[7]=0:1f3dd000 (fff)
  get Phys(data[n=8+1000]=f6c15000)
AtapiVirtToPhysAddr_: f6c15000 -> 00000000:1f3d6000
  ph data[8]=0:1f3d6000 (fff)
  get Phys(data[n=9+1000]=f6c16000)
AtapiVirtToPhysAddr_: f6c16000 -> 00000000:1f3d7000
  ph data[8]=0:1f3d6000 (1fff)
  get Phys(data[n=9+2000]=f6c17000)
AtapiVirtToPhysAddr_: f6c17000 -> 00000000:1f3d8000
  set TERM
  ph data[8]=0:1f3d6000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6781180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 12 request(s)!
AtapiStartIo: next Srb b5f13650
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: qd=b
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fe11a0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0xe, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=a
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fe1220, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0xe, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb5f1d298
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f1d298, CDB 0xb5f1d2c8, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=9
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fe12a0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0xe, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f1d298
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f1d298, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f1d298
AtapiInterrupt: NextRequest, srb=0xb63346a8
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb63346a8, CDB 0xb63346d8, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: qd=8
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fe7790, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x9, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b63346a8
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb63346a8, status 1
AtapiInterrupt: RequestComplete, srb 0xb63346a8
AtapiInterrupt: NextRequest, srb=0xb5f15218
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f15218, CDB 0xb5f15248, AtaReq 0xb677f0d8, SCmd 0x28
UniataNeedQueueing: qd=7
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6fdb6ec
** Ide: Command AtaReq 0xb677f0d8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fe7810, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677f0d8
  AHCI AtaReq CMD 0xb677f180 (ph 0x8e42180)
  prd_length 0x9, flags 0x5, base 8e42180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f15218
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f15218, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f15218
AtapiInterrupt: NextRequest, srb=0xb5f13830
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f13830, CDB 0xb5f13860, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: qd=6
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6fdb714
** Ide: Command AtaReq 0xb67800f0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fe7890, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0
  AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180)
  prd_length 0x9, flags 0x5, base 8e43180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f13830
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f13830, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f13830
AtapiInterrupt: NextRequest, srb=0xb5f13650
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f13650, CDB 0xb5f13680, AtaReq 0xb6781108, SCmd 0x28
UniataNeedQueueing: qd=5
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6fdb654
** Ide: Command AtaReq 0xb6781108
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fe7910, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108
  AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180)
  prd_length 0x9, flags 0x5, base 8e44180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f13650
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
err:(win32ss/user/user32/windows/window.c:491) CreateWindowExW RegisterSystemControls
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f13650, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f13650
AtapiInterrupt: NextRequest, srb=0xb5f1da68
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f1da68, CDB 0xb5f1da98, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: qd=4
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6fdb87c
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39008170, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x9, flags 0x45, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f1da68
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f1d298, CDB 0xb5f1d2c8, AtaReq 0xb6781108, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=4
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704b60c
** Ide: Command AtaReq 0xb6781108
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fe7790, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fe7790, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6781108: cmd aligned b6781180, d=18
  ahci_cmd_ptr 0xb6781180
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6781180)
AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:1e89c000
  ph data[0]=0:1e89c000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:1e89d000
  set TERM
  ph data[0]=0:1e89c000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6781180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 5 request(s)!
AtapiStartIo: next Srb b5f1d298
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f1da68, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f1da68
AtapiInterrupt: NextRequest, srb=0xb5f17470
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f17470, CDB 0xb5f174a0, AtaReq 0xb6778030, SCmd 0x2a
UniataNeedQueueing: qd=4
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704b490
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390081f0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x9, flags 0x45, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f17470
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f17470, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f17470
AtapiInterrupt: NextRequest, srb=0xb5f163d8
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f163d8, CDB 0xb5f16408, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: qd=3
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6fdb230
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39008270, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x9, flags 0x45, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f163d8
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f163d8, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f163d8
AtapiInterrupt: NextRequest, srb=0xb5f16390
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f16390, CDB 0xb5f163c0, AtaReq 0xb677e0c0, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6fdbad8
** Ide: Command AtaReq 0xb677e0c0
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390082f0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677e0c0
  AHCI AtaReq CMD 0xb677e180 (ph 0x8e41180)
  prd_length 0x9, flags 0x45, base 8e41180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f16390
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f16390, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f16390
AtapiInterrupt: NextRequest, srb=0xb5f1d298
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f1d298, CDB 0xb5f1d2c8, AtaReq 0xb6781108, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6fdb338
** Ide: Command AtaReq 0xb6781108
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fe7790, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108
  AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180)
  prd_length 0x1, flags 0x5, base 8e44180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f1d298
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f1d298, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f1d298
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f1da68, CDB 0xb5f1da98, AtaReq 0xb677e0c0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5f1da68
TopLevel (3), AtaReq 0xb677e0c0
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704b1e0
** Ide: Command AtaReq 0xb677e0c0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fdd200, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fdd200, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677e0c0: cmd aligned b677e180, d=60
  ahci_cmd_ptr 0xb677e180
AtapiDmaSetup: mode 0x0, data f6ff4000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677e180)
AtapiVirtToPhysAddr_: b677e180 -> 00000000:08e41180
  get Phys(data[0]=f6ff4000)
AtapiVirtToPhysAddr_: f6ff4000 -> 00000000:1e8bc000
  ph data[0]=0:1e8bc000 (fff)
  get Phys(data[n=1+1000]=f6ff5000)
AtapiVirtToPhysAddr_: f6ff5000 -> 00000000:1e8b5000
  ph data[1]=0:1e8b5000 (fff)
  get Phys(data[n=2+1000]=f6ff6000)
AtapiVirtToPhysAddr_: f6ff6000 -> 00000000:1e8be000
  ph data[2]=0:1e8be000 (fff)
  get Phys(data[n=3+1000]=f6ff7000)
AtapiVirtToPhysAddr_: f6ff7000 -> 00000000:1e8bf000
  ph data[2]=0:1e8be000 (1fff)
  get Phys(data[n=3+2000]=f6ff8000)
AtapiVirtToPhysAddr_: f6ff8000 -> 00000000:1e8c0000
  ph data[2]=0:1e8be000 (2fff)
  get Phys(data[n=3+3000]=f6ff9000)
AtapiVirtToPhysAddr_: f6ff9000 -> 00000000:1e8c9000
  ph data[3]=0:1e8c9000 (fff)
  get Phys(data[n=4+1000]=f6ffa000)
AtapiVirtToPhysAddr_: f6ffa000 -> 00000000:1e8ca000
  ph data[3]=0:1e8c9000 (1fff)
  get Phys(data[n=4+2000]=f6ffb000)
AtapiVirtToPhysAddr_: f6ffb000 -> 00000000:1e8cb000
  ph data[3]=0:1e8c9000 (2fff)
  get Phys(data[n=4+3000]=f6ffc000)
AtapiVirtToPhysAddr_: f6ffc000 -> 00000000:1e8c4000
  ph data[4]=0:1e8c4000 (fff)
  get Phys(data[n=5+1000]=f6ffd000)
AtapiVirtToPhysAddr_: f6ffd000 -> 00000000:1e8bd000
  ph data[5]=0:1e8bd000 (fff)
  get Phys(data[n=6+1000]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:1e8c6000
  ph data[6]=0:1e8c6000 (fff)
  get Phys(data[n=7+1000]=f6fff000)
AtapiVirtToPhysAddr_: f6fff000 -> 00000000:1e8c7000
  ph data[6]=0:1e8c6000 (1fff)
  get Phys(data[n=7+2000]=f7000000)
AtapiVirtToPhysAddr_: f7000000 -> 00000000:1e8c8000
  ph data[6]=0:1e8c6000 (2fff)
  get Phys(data[n=7+3000]=f7001000)
AtapiVirtToPhysAddr_: f7001000 -> 00000000:1e8d1000
  ph data[7]=0:1e8d1000 (fff)
  get Phys(data[n=8+1000]=f7002000)
AtapiVirtToPhysAddr_: f7002000 -> 00000000:1e8d2000
  ph data[7]=0:1e8d1000 (1fff)
  get Phys(data[n=8+2000]=f7003000)
AtapiVirtToPhysAddr_: f7003000 -> 00000000:1e8d3000
  set TERM
  ph data[7]=0:1e8d1000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677e180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fdd200, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677e0c0
  AHCI AtaReq CMD 0xb677e180 (ph 0x8e41180)
  prd_length 0x8, flags 0x5, base 8e41180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f1da68
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6781108, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704b1e0
** Ide: Command AtaReq 0xb6781108
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fdd280, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fdd280, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6781108: cmd aligned b6781180, d=18
  ahci_cmd_ptr 0xb6781180
AtapiDmaSetup: mode 0x0, data f7004000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6781180)
AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180
  get Phys(data[0]=f7004000)
AtapiVirtToPhysAddr_: f7004000 -> 00000000:1e8cc000
  ph data[0]=0:1e8cc000 (fff)
  get Phys(data[n=1+1000]=f7005000)
AtapiVirtToPhysAddr_: f7005000 -> 00000000:1e8c5000
  ph data[1]=0:1e8c5000 (fff)
  get Phys(data[n=2+1000]=f7006000)
AtapiVirtToPhysAddr_: f7006000 -> 00000000:1e8ce000
  ph data[2]=0:1e8ce000 (fff)
  get Phys(data[n=3+1000]=f7007000)
AtapiVirtToPhysAddr_: f7007000 -> 00000000:1e8cf000
  ph data[2]=0:1e8ce000 (1fff)
  get Phys(data[n=3+2000]=f7008000)
AtapiVirtToPhysAddr_: f7008000 -> 00000000:1e8d0000
  ph data[2]=0:1e8ce000 (2fff)
  get Phys(data[n=3+3000]=f7009000)
AtapiVirtToPhysAddr_: f7009000 -> 00000000:1e8d9000
  ph data[3]=0:1e8d9000 (fff)
  get Phys(data[n=4+1000]=f700a000)
AtapiVirtToPhysAddr_: f700a000 -> 00000000:1e8da000
  ph data[3]=0:1e8d9000 (1fff)
  get Phys(data[n=4+2000]=f700b000)
AtapiVirtToPhysAddr_: f700b000 -> 00000000:1e8db000
  ph data[3]=0:1e8d9000 (2fff)
  get Phys(data[n=4+3000]=f700c000)
AtapiVirtToPhysAddr_: f700c000 -> 00000000:1e8d4000
  ph data[4]=0:1e8d4000 (fff)
  get Phys(data[n=5+1000]=f700d000)
AtapiVirtToPhysAddr_: f700d000 -> 00000000:1e8cd000
  ph data[5]=0:1e8cd000 (fff)
  get Phys(data[n=6+1000]=f700e000)
AtapiVirtToPhysAddr_: f700e000 -> 00000000:1e8d6000
  ph data[6]=0:1e8d6000 (fff)
  get Phys(data[n=7+1000]=f700f000)
AtapiVirtToPhysAddr_: f700f000 -> 00000000:1e8d7000
  ph data[6]=0:1e8d6000 (1fff)
  get Phys(data[n=7+2000]=f7010000)
AtapiVirtToPhysAddr_: f7010000 -> 00000000:1e8d8000
  ph data[6]=0:1e8d6000 (2fff)
  get Phys(data[n=7+3000]=f7011000)
AtapiVirtToPhysAddr_: f7011000 -> 00000000:1e8e1000
  ph data[7]=0:1e8e1000 (fff)
  get Phys(data[n=8+1000]=f7012000)
AtapiVirtToPhysAddr_: f7012000 -> 00000000:1e8e2000
  ph data[7]=0:1e8e1000 (1fff)
  get Phys(data[n=8+2000]=f7013000)
AtapiVirtToPhysAddr_: f7013000 -> 00000000:1e8e3000
  set TERM
  ph data[7]=0:1e8e1000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6781180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704b1e0
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fdd300, OrigWordsRequested 0x7900, DevSize 0x79
IdeReadWrite (REQ): Starting sector is 38fdd300, Number of WORDS 0x7900, DevSize 0x79
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7014000, count f200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7014000)
AtapiVirtToPhysAddr_: f7014000 -> 00000000:1e8dc000
  ph data[0]=0:1e8dc000 (fff)
  get Phys(data[n=1+1000]=f7015000)
AtapiVirtToPhysAddr_: f7015000 -> 00000000:1e8d5000
  ph data[1]=0:1e8d5000 (fff)
  get Phys(data[n=2+1000]=f7016000)
AtapiVirtToPhysAddr_: f7016000 -> 00000000:1e8de000
  ph data[2]=0:1e8de000 (fff)
  get Phys(data[n=3+1000]=f7017000)
AtapiVirtToPhysAddr_: f7017000 -> 00000000:1e8df000
  ph data[2]=0:1e8de000 (1fff)
  get Phys(data[n=3+2000]=f7018000)
AtapiVirtToPhysAddr_: f7018000 -> 00000000:1e8e0000
  ph data[2]=0:1e8de000 (2fff)
  get Phys(data[n=3+3000]=f7019000)
AtapiVirtToPhysAddr_: f7019000 -> 00000000:1e8e9000
  ph data[3]=0:1e8e9000 (fff)
  get Phys(data[n=4+1000]=f701a000)
AtapiVirtToPhysAddr_: f701a000 -> 00000000:1e8ea000
  ph data[3]=0:1e8e9000 (1fff)
  get Phys(data[n=4+2000]=f701b000)
AtapiVirtToPhysAddr_: f701b000 -> 00000000:1e8eb000
  ph data[3]=0:1e8e9000 (2fff)
  get Phys(data[n=4+3000]=f701c000)
AtapiVirtToPhysAddr_: f701c000 -> 00000000:1e8e4000
  ph data[4]=0:1e8e4000 (fff)
  get Phys(data[n=5+1000]=f701d000)
AtapiVirtToPhysAddr_: f701d000 -> 00000000:1e8dd000
  ph data[5]=0:1e8dd000 (fff)
  get Phys(data[n=6+1000]=f701e000)
AtapiVirtToPhysAddr_: f701e000 -> 00000000:1e8e6000
  ph data[6]=0:1e8e6000 (fff)
  get Phys(data[n=7+1000]=f701f000)
AtapiVirtToPhysAddr_: f701f000 -> 00000000:1e8e7000
  ph data[6]=0:1e8e6000 (1fff)
  get Phys(data[n=7+2000]=f7020000)
AtapiVirtToPhysAddr_: f7020000 -> 00000000:1e8e8000
  ph data[6]=0:1e8e6000 (2fff)
  get Phys(data[n=7+3000]=f7021000)
AtapiVirtToPhysAddr_: f7021000 -> 00000000:1e8f1000
  ph data[7]=0:1e8f1000 (fff)
  get Phys(data[n=8+1000]=f7022000)
AtapiVirtToPhysAddr_: f7022000 -> 00000000:1e8f2000
  ph data[7]=0:1e8f1000 (1fff)
  get Phys(data[n=8+2000]=f7023000)
AtapiVirtToPhysAddr_: f7023000 -> 00000000:1e8f3000
  set TERM
  ph data[7]=0:1e8f1000 (21ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f1da68, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f1da68
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6781108, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6fdada0
** Ide: Command AtaReq 0xb6781108
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fdd280, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108
  AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180)
  prd_length 0x8, flags 0x5, base 8e44180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff278
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fdd300, Count 0x79(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x8, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 7900, WordsLeft 7900
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered f200, full size f200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704b60c
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fdd200, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fdd200, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:1e882000
  ph data[0]=0:1e882000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:1e873000
  set TERM
  ph data[1]=0:1e873000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fdd200, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x2, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6719698
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704b1e0
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc0050, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fc0050, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7000000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7000000)
AtapiVirtToPhysAddr_: f7000000 -> 00000000:1e93e000
  ph data[0]=0:1e93e000 (fff)
  get Phys(data[n=1+1000]=f7001000)
AtapiVirtToPhysAddr_: f7001000 -> 00000000:1e93f000
  ph data[0]=0:1e93e000 (1fff)
  get Phys(data[n=1+2000]=f7002000)
AtapiVirtToPhysAddr_: f7002000 -> 00000000:1e940000
  ph data[0]=0:1e93e000 (2fff)
  get Phys(data[n=1+3000]=f7003000)
AtapiVirtToPhysAddr_: f7003000 -> 00000000:1e949000
  ph data[1]=0:1e949000 (fff)
  get Phys(data[n=2+1000]=f7004000)
AtapiVirtToPhysAddr_: f7004000 -> 00000000:1e942000
  ph data[2]=0:1e942000 (fff)
  get Phys(data[n=3+1000]=f7005000)
AtapiVirtToPhysAddr_: f7005000 -> 00000000:1e933000
  ph data[3]=0:1e933000 (fff)
  get Phys(data[n=4+1000]=f7006000)
AtapiVirtToPhysAddr_: f7006000 -> 00000000:1e934000
  ph data[3]=0:1e933000 (1fff)
  get Phys(data[n=4+2000]=f7007000)
AtapiVirtToPhysAddr_: f7007000 -> 00000000:1e92d000
  ph data[4]=0:1e92d000 (fff)
  get Phys(data[n=5+1000]=f7008000)
AtapiVirtToPhysAddr_: f7008000 -> 00000000:1e946000
  ph data[5]=0:1e946000 (fff)
  get Phys(data[n=6+1000]=f7009000)
AtapiVirtToPhysAddr_: f7009000 -> 00000000:1e947000
  ph data[5]=0:1e946000 (1fff)
  get Phys(data[n=6+2000]=f700a000)
AtapiVirtToPhysAddr_: f700a000 -> 00000000:1e948000
  ph data[5]=0:1e946000 (2fff)
  get Phys(data[n=6+3000]=f700b000)
AtapiVirtToPhysAddr_: f700b000 -> 00000000:1e951000
  ph data[6]=0:1e951000 (fff)
  get Phys(data[n=7+1000]=f700c000)
AtapiVirtToPhysAddr_: f700c000 -> 00000000:1e94a000
  ph data[7]=0:1e94a000 (fff)
  get Phys(data[n=8+1000]=f700d000)
AtapiVirtToPhysAddr_: f700d000 -> 00000000:1e93b000
  ph data[8]=0:1e93b000 (fff)
  get Phys(data[n=9+1000]=f700e000)
AtapiVirtToPhysAddr_: f700e000 -> 00000000:1e93c000
  ph data[8]=0:1e93b000 (1fff)
  get Phys(data[n=9+2000]=f700f000)
AtapiVirtToPhysAddr_: f700f000 -> 00000000:1e935000
  set TERM
  ph data[9]=0:1e935000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc0050, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0xa, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6781108, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704b1e0
** Ide: Command AtaReq 0xb6781108
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc00d0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fc00d0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6781108: cmd aligned b6781180, d=18
  ahci_cmd_ptr 0xb6781180
AtapiDmaSetup: mode 0x0, data f7010000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6781180)
AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180
  get Phys(data[0]=f7010000)
AtapiVirtToPhysAddr_: f7010000 -> 00000000:1e94e000
  ph data[0]=0:1e94e000 (fff)
  get Phys(data[n=1+1000]=f7011000)
AtapiVirtToPhysAddr_: f7011000 -> 00000000:1e94f000
  ph data[0]=0:1e94e000 (1fff)
  get Phys(data[n=1+2000]=f7012000)
AtapiVirtToPhysAddr_: f7012000 -> 00000000:1e950000
  ph data[0]=0:1e94e000 (2fff)
  get Phys(data[n=1+3000]=f7013000)
AtapiVirtToPhysAddr_: f7013000 -> 00000000:1e959000
  ph data[1]=0:1e959000 (fff)
  get Phys(data[n=2+1000]=f7014000)
AtapiVirtToPhysAddr_: f7014000 -> 00000000:1e952000
  ph data[2]=0:1e952000 (fff)
  get Phys(data[n=3+1000]=f7015000)
AtapiVirtToPhysAddr_: f7015000 -> 00000000:1e943000
  ph data[3]=0:1e943000 (fff)
  get Phys(data[n=4+1000]=f7016000)
AtapiVirtToPhysAddr_: f7016000 -> 00000000:1e944000
  ph data[3]=0:1e943000 (1fff)
  get Phys(data[n=4+2000]=f7017000)
AtapiVirtToPhysAddr_: f7017000 -> 00000000:1e93d000
  ph data[4]=0:1e93d000 (fff)
  get Phys(data[n=5+1000]=f7018000)
AtapiVirtToPhysAddr_: f7018000 -> 00000000:1e956000
  ph data[5]=0:1e956000 (fff)
  get Phys(data[n=6+1000]=f7019000)
AtapiVirtToPhysAddr_: f7019000 -> 00000000:1e957000
  ph data[5]=0:1e956000 (1fff)
  get Phys(data[n=6+2000]=f701a000)
AtapiVirtToPhysAddr_: f701a000 -> 00000000:1e958000
  ph data[5]=0:1e956000 (2fff)
  get Phys(data[n=6+3000]=f701b000)
AtapiVirtToPhysAddr_: f701b000 -> 00000000:1e961000
  ph data[6]=0:1e961000 (fff)
  get Phys(data[n=7+1000]=f701c000)
AtapiVirtToPhysAddr_: f701c000 -> 00000000:1e95a000
  ph data[7]=0:1e95a000 (fff)
  get Phys(data[n=8+1000]=f701d000)
AtapiVirtToPhysAddr_: f701d000 -> 00000000:1e94b000
  ph data[8]=0:1e94b000 (fff)
  get Phys(data[n=9+1000]=f701e000)
AtapiVirtToPhysAddr_: f701e000 -> 00000000:1e94c000
  ph data[8]=0:1e94b000 (1fff)
  get Phys(data[n=9+2000]=f701f000)
AtapiVirtToPhysAddr_: f701f000 -> 00000000:1e945000
  set TERM
  ph data[9]=0:1e945000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6781180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f1da68, CDB 0xb5f1da98, AtaReq 0xb677e0c0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704b1e0
** Ide: Command AtaReq 0xb677e0c0
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc0150, OrigWordsRequested 0x1600, DevSize 0x16
IdeReadWrite (REQ): Starting sector is 38fc0150, Number of WORDS 0x1600, DevSize 0x16
  AtaReq 0xb677e0c0: cmd aligned b677e180, d=60
  ahci_cmd_ptr 0xb677e180
AtapiDmaSetup: mode 0x0, data f7020000, count 2c00, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677e180)
AtapiVirtToPhysAddr_: b677e180 -> 00000000:08e41180
  get Phys(data[0]=f7020000)
AtapiVirtToPhysAddr_: f7020000 -> 00000000:1e95e000
  ph data[0]=0:1e95e000 (fff)
  get Phys(data[n=1+1000]=f7021000)
AtapiVirtToPhysAddr_: f7021000 -> 00000000:1e95f000
  ph data[0]=0:1e95e000 (1fff)
  get Phys(data[n=1+2000]=f7022000)
AtapiVirtToPhysAddr_: f7022000 -> 00000000:1e960000
  set TERM
  ph data[0]=0:1e95e000 (2bff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677e180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b5f1da68
AtapiStartIo: query PORT for next request
(win32ss/user/ntuser/desktop.c:1317) err: ptiLastInput is CLEARED!!
(win32ss/user/ntuser/msgqueue.c:846) err: Remove Window Messages E15F0BD0 From Sent Queue
(win32ss/user/ntuser/msgqueue.c:1277) err: NB Receiving Thread woken up dead!
(win32ss/user/ntuser/msgqueue.c:2300) err: Thread Cleanup Sent Messages E15F0BD0
(win32ss/user/ntuser/message.c:1256) err: UserPostMessage: Invalid handle 0x00020066 Msg 0x0!
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff230
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fee4c0, OrigWordsRequested 0x3d00, DevSize 0x3d
IdeReadWrite (REQ): Starting sector is 38fee4c0, Number of WORDS 0x3d00, DevSize 0x3d
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f6fd4000, count 7a00, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f6fd4000)
AtapiVirtToPhysAddr_: f6fd4000 -> 00000000:1e973000
  ph data[0]=0:1e973000 (fff)
  get Phys(data[n=1+1000]=f6fd5000)
AtapiVirtToPhysAddr_: f6fd5000 -> 00000000:1e974000
  ph data[0]=0:1e973000 (1fff)
  get Phys(data[n=1+2000]=f6fd6000)
AtapiVirtToPhysAddr_: f6fd6000 -> 00000000:1e96d000
  ph data[1]=0:1e96d000 (fff)
  get Phys(data[n=2+1000]=f6fd7000)
AtapiVirtToPhysAddr_: f6fd7000 -> 00000000:1e97e000
  ph data[2]=0:1e97e000 (fff)
  get Phys(data[n=3+1000]=f6fd8000)
AtapiVirtToPhysAddr_: f6fd8000 -> 00000000:1e97f000
  ph data[2]=0:1e97e000 (1fff)
  get Phys(data[n=3+2000]=f6fd9000)
AtapiVirtToPhysAddr_: f6fd9000 -> 00000000:1e980000
  ph data[2]=0:1e97e000 (2fff)
  get Phys(data[n=3+3000]=f6fda000)
AtapiVirtToPhysAddr_: f6fda000 -> 00000000:1e989000
  ph data[3]=0:1e989000 (fff)
  get Phys(data[n=4+1000]=f6fdb000)
AtapiVirtToPhysAddr_: f6fdb000 -> 00000000:1e982000
  set TERM
  ph data[4]=0:1e982000 (9ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f10448, CDB 0xb5f10478, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=4
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7665418
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3960ae60, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3960ae60, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f6fa0000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f6fa0000)
AtapiVirtToPhysAddr_: f6fa0000 -> 00000000:1e9b3000
  ph data[0]=0:1e9b3000 (fff)
  get Phys(data[n=1+1000]=f6fa1000)
AtapiVirtToPhysAddr_: f6fa1000 -> 00000000:1e9b4000
  ph data[0]=0:1e9b3000 (1fff)
  get Phys(data[n=1+2000]=f6fa2000)
AtapiVirtToPhysAddr_: f6fa2000 -> 00000000:1e9ad000
  ph data[1]=0:1e9ad000 (fff)
  get Phys(data[n=2+1000]=f6fa3000)
AtapiVirtToPhysAddr_: f6fa3000 -> 00000000:1e9be000
  ph data[2]=0:1e9be000 (fff)
  get Phys(data[n=3+1000]=f6fa4000)
AtapiVirtToPhysAddr_: f6fa4000 -> 00000000:1e9bf000
  ph data[2]=0:1e9be000 (1fff)
  get Phys(data[n=3+2000]=f6fa5000)
AtapiVirtToPhysAddr_: f6fa5000 -> 00000000:1e9c0000
  ph data[2]=0:1e9be000 (2fff)
  get Phys(data[n=3+3000]=f6fa6000)
AtapiVirtToPhysAddr_: f6fa6000 -> 00000000:1e9c9000
  ph data[3]=0:1e9c9000 (fff)
  get Phys(data[n=4+1000]=f6fa7000)
AtapiVirtToPhysAddr_: f6fa7000 -> 00000000:1e9c2000
  ph data[4]=0:1e9c2000 (fff)
  get Phys(data[n=5+1000]=f6fa8000)
AtapiVirtToPhysAddr_: f6fa8000 -> 00000000:1e9bb000
  ph data[5]=0:1e9bb000 (fff)
  get Phys(data[n=6+1000]=f6fa9000)
AtapiVirtToPhysAddr_: f6fa9000 -> 00000000:1e9bc000
  ph data[5]=0:1e9bb000 (1fff)
  get Phys(data[n=6+2000]=f6faa000)
AtapiVirtToPhysAddr_: f6faa000 -> 00000000:1e9b5000
  ph data[6]=0:1e9b5000 (fff)
  get Phys(data[n=7+1000]=f6fab000)
AtapiVirtToPhysAddr_: f6fab000 -> 00000000:1e9c6000
  ph data[7]=0:1e9c6000 (fff)
  get Phys(data[n=8+1000]=f6fac000)
AtapiVirtToPhysAddr_: f6fac000 -> 00000000:1e9c7000
  ph data[7]=0:1e9c6000 (1fff)
  get Phys(data[n=8+2000]=f6fad000)
AtapiVirtToPhysAddr_: f6fad000 -> 00000000:1e9c8000
  ph data[7]=0:1e9c6000 (2fff)
  get Phys(data[n=8+3000]=f6fae000)
AtapiVirtToPhysAddr_: f6fae000 -> 00000000:1e9d1000
  ph data[8]=0:1e9d1000 (fff)
  get Phys(data[n=9+1000]=f6faf000)
AtapiVirtToPhysAddr_: f6faf000 -> 00000000:1e9ca000
  set TERM
  ph data[9]=0:1e9ca000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 5 request(s)!
AtapiStartIo: next Srb b5f10448
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb635b910, CDB 0xb635b940, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=5
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7665418
** Ide: Command AtaReq 0xb67800f0
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3960aee0, OrigWordsRequested 0x3d00, DevSize 0x3d
IdeReadWrite (REQ): Starting sector is 3960aee0, Number of WORDS 0x3d00, DevSize 0x3d
  AtaReq 0xb67800f0: cmd aligned b6780180, d=30
  ahci_cmd_ptr 0xb6780180
AtapiDmaSetup: mode 0x0, data f6fb0000, count 7a00, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6780180)
AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180
  get Phys(data[0]=f6fb0000)
AtapiVirtToPhysAddr_: f6fb0000 -> 00000000:1e9c3000
  ph data[0]=0:1e9c3000 (fff)
  get Phys(data[n=1+1000]=f6fb1000)
AtapiVirtToPhysAddr_: f6fb1000 -> 00000000:1e9c4000
  ph data[0]=0:1e9c3000 (1fff)
  get Phys(data[n=1+2000]=f6fb2000)
AtapiVirtToPhysAddr_: f6fb2000 -> 00000000:1e9bd000
  ph data[1]=0:1e9bd000 (fff)
  get Phys(data[n=2+1000]=f6fb3000)
AtapiVirtToPhysAddr_: f6fb3000 -> 00000000:1e9ce000
  ph data[2]=0:1e9ce000 (fff)
  get Phys(data[n=3+1000]=f6fb4000)
AtapiVirtToPhysAddr_: f6fb4000 -> 00000000:1e9cf000
  ph data[2]=0:1e9ce000 (1fff)
  get Phys(data[n=3+2000]=f6fb5000)
AtapiVirtToPhysAddr_: f6fb5000 -> 00000000:1e9d0000
  ph data[2]=0:1e9ce000 (2fff)
  get Phys(data[n=3+3000]=f6fb6000)
AtapiVirtToPhysAddr_: f6fb6000 -> 00000000:1e9d9000
  ph data[3]=0:1e9d9000 (fff)
  get Phys(data[n=4+1000]=f6fb7000)
AtapiVirtToPhysAddr_: f6fb7000 -> 00000000:1e9d2000
  set TERM
  ph data[4]=0:1e9d2000 (9ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6780180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 6 request(s)!
AtapiStartIo: next Srb b635b910
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6781108, SCmd 0x28
UniataNeedQueueing: qd=5
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6781108
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc00d0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108
  AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180)
  prd_length 0xa, flags 0x5, base 8e44180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb5f1da68
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f1da68, CDB 0xb5f1da98, AtaReq 0xb677e0c0, SCmd 0x28
UniataNeedQueueing: qd=4
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677e0c0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc0150, Count 0x16(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677e0c0
  AHCI AtaReq CMD 0xb677e180 (ph 0x8e41180)
  prd_length 0x1, flags 0x5, base 8e41180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f1da68
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1600, WordsLeft 1600
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2c00, full size 2c00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f1da68, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f1da68
AtapiInterrupt: NextRequest, srb=0xb6346750
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb6778030, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fee4c0, Count 0x3d(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x5, flags 0x5, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6781108, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704b60c
** Ide: Command AtaReq 0xb6781108
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc0050, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fc0050, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6781108: cmd aligned b6781180, d=18
  ahci_cmd_ptr 0xb6781180
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6781180)
AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:1e64f000
  ph data[0]=0:1e64f000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:1e650000
  set TERM
  ph data[0]=0:1e64f000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6781180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f1da68, CDB 0xb5f1da98, AtaReq 0xb677e0c0, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=4
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf705f5c0
** Ide: Command AtaReq 0xb677e0c0
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39008170, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39008170, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677e0c0: cmd aligned b677e180, d=60
  ahci_cmd_ptr 0xb677e180
AtapiDmaSetup: mode 0x0, data f6c58000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677e180)
AtapiVirtToPhysAddr_: b677e180 -> 00000000:08e41180
  get Phys(data[0]=f6c58000)
AtapiVirtToPhysAddr_: f6c58000 -> 00000000:27461000
  ph data[0]=0:27461000 (fff)
  get Phys(data[n=1+1000]=f6c59000)
AtapiVirtToPhysAddr_: f6c59000 -> 00000000:27462000
  ph data[0]=0:27461000 (1fff)
  get Phys(data[n=1+2000]=f6c5a000)
AtapiVirtToPhysAddr_: f6c5a000 -> 00000000:27463000
  ph data[0]=0:27461000 (2fff)
  get Phys(data[n=1+3000]=f6c5b000)
AtapiVirtToPhysAddr_: f6c5b000 -> 00000000:2746c000
  ph data[1]=0:2746c000 (fff)
  get Phys(data[n=2+1000]=f6c5c000)
AtapiVirtToPhysAddr_: f6c5c000 -> 00000000:2746d000
  ph data[1]=0:2746c000 (1fff)
  get Phys(data[n=2+2000]=f6c5d000)
AtapiVirtToPhysAddr_: f6c5d000 -> 00000000:27466000
  ph data[2]=0:27466000 (fff)
  get Phys(data[n=3+1000]=f6c5e000)
AtapiVirtToPhysAddr_: f6c5e000 -> 00000000:2745f000
  ph data[3]=0:2745f000 (fff)
  get Phys(data[n=4+1000]=f6c5f000)
AtapiVirtToPhysAddr_: f6c5f000 -> 00000000:27468000
  ph data[4]=0:27468000 (fff)
  get Phys(data[n=5+1000]=f6c60000)
AtapiVirtToPhysAddr_: f6c60000 -> 00000000:27469000
  ph data[4]=0:27468000 (1fff)
  get Phys(data[n=5+2000]=f6c61000)
AtapiVirtToPhysAddr_: f6c61000 -> 00000000:2746a000
  ph data[4]=0:27468000 (2fff)
  get Phys(data[n=5+3000]=f6c62000)
AtapiVirtToPhysAddr_: f6c62000 -> 00000000:2746b000
  ph data[4]=0:27468000 (3fff)
  get Phys(data[n=5+4000]=f6c63000)
AtapiVirtToPhysAddr_: f6c63000 -> 00000000:27474000
  ph data[5]=0:27474000 (fff)
  get Phys(data[n=6+1000]=f6c64000)
AtapiVirtToPhysAddr_: f6c64000 -> 00000000:27475000
  ph data[5]=0:27474000 (1fff)
  get Phys(data[n=6+2000]=f6c65000)
AtapiVirtToPhysAddr_: f6c65000 -> 00000000:2746e000
  ph data[6]=0:2746e000 (fff)
  get Phys(data[n=7+1000]=f6c66000)
AtapiVirtToPhysAddr_: f6c66000 -> 00000000:27467000
  ph data[7]=0:27467000 (fff)
  get Phys(data[n=8+1000]=f6c67000)
AtapiVirtToPhysAddr_: f6c67000 -> 00000000:27470000
  set TERM
  ph data[8]=0:27470000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677e180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 5 request(s)!
AtapiStartIo: next Srb b5f1da68
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=5
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf705f5c0
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 390081f0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390081f0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f6c68000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f6c68000)
AtapiVirtToPhysAddr_: f6c68000 -> 00000000:27471000
  ph data[0]=0:27471000 (fff)
  get Phys(data[n=1+1000]=f6c69000)
AtapiVirtToPhysAddr_: f6c69000 -> 00000000:27472000
  ph data[0]=0:27471000 (1fff)
  get Phys(data[n=1+2000]=f6c6a000)
AtapiVirtToPhysAddr_: f6c6a000 -> 00000000:27473000
  ph data[0]=0:27471000 (2fff)
  get Phys(data[n=1+3000]=f6c6b000)
AtapiVirtToPhysAddr_: f6c6b000 -> 00000000:2747c000
  ph data[1]=0:2747c000 (fff)
  get Phys(data[n=2+1000]=f6c6c000)
AtapiVirtToPhysAddr_: f6c6c000 -> 00000000:2747d000
  ph data[1]=0:2747c000 (1fff)
  get Phys(data[n=2+2000]=f6c6d000)
AtapiVirtToPhysAddr_: f6c6d000 -> 00000000:27476000
  ph data[2]=0:27476000 (fff)
  get Phys(data[n=3+1000]=f6c6e000)
AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:2746f000
  ph data[3]=0:2746f000 (fff)
  get Phys(data[n=4+1000]=f6c6f000)
AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:27478000
  ph data[4]=0:27478000 (fff)
  get Phys(data[n=5+1000]=f6c70000)
AtapiVirtToPhysAddr_: f6c70000 -> 00000000:27479000
  ph data[4]=0:27478000 (1fff)
  get Phys(data[n=5+2000]=f6c71000)
AtapiVirtToPhysAddr_: f6c71000 -> 00000000:2747a000
  ph data[4]=0:27478000 (2fff)
  get Phys(data[n=5+3000]=f6c72000)
AtapiVirtToPhysAddr_: f6c72000 -> 00000000:2747b000
  ph data[4]=0:27478000 (3fff)
  get Phys(data[n=5+4000]=f6c73000)
AtapiVirtToPhysAddr_: f6c73000 -> 00000000:27484000
  ph data[5]=0:27484000 (fff)
  get Phys(data[n=6+1000]=f6c74000)
AtapiVirtToPhysAddr_: f6c74000 -> 00000000:27485000
  ph data[5]=0:27484000 (1fff)
  get Phys(data[n=6+2000]=f6c75000)
AtapiVirtToPhysAddr_: f6c75000 -> 00000000:2747e000
  ph data[6]=0:2747e000 (fff)
  get Phys(data[n=7+1000]=f6c76000)
AtapiVirtToPhysAddr_: f6c76000 -> 00000000:27477000
  ph data[7]=0:27477000 (fff)
  get Phys(data[n=8+1000]=f6c77000)
AtapiVirtToPhysAddr_: f6c77000 -> 00000000:27480000
  set TERM
  ph data[8]=0:27480000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 6 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb677f0d8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=6
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf705f5c0
** Ide: Command AtaReq 0xb677f0d8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39008270, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39008270, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677f0d8: cmd aligned b677f180, d=48
  ahci_cmd_ptr 0xb677f180
AtapiDmaSetup: mode 0x0, data f6c78000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677f180)
AtapiVirtToPhysAddr_: b677f180 -> 00000000:08e42180
  get Phys(data[0]=f6c78000)
AtapiVirtToPhysAddr_: f6c78000 -> 00000000:27481000
  ph data[0]=0:27481000 (fff)
  get Phys(data[n=1+1000]=f6c79000)
AtapiVirtToPhysAddr_: f6c79000 -> 00000000:27482000
  ph data[0]=0:27481000 (1fff)
  get Phys(data[n=1+2000]=f6c7a000)
AtapiVirtToPhysAddr_: f6c7a000 -> 00000000:27483000
  ph data[0]=0:27481000 (2fff)
  get Phys(data[n=1+3000]=f6c7b000)
AtapiVirtToPhysAddr_: f6c7b000 -> 00000000:2748c000
  ph data[1]=0:2748c000 (fff)
  get Phys(data[n=2+1000]=f6c7c000)
AtapiVirtToPhysAddr_: f6c7c000 -> 00000000:2748d000
  ph data[1]=0:2748c000 (1fff)
  get Phys(data[n=2+2000]=f6c7d000)
AtapiVirtToPhysAddr_: f6c7d000 -> 00000000:27486000
  ph data[2]=0:27486000 (fff)
  get Phys(data[n=3+1000]=f6c7e000)
AtapiVirtToPhysAddr_: f6c7e000 -> 00000000:2747f000
  ph data[3]=0:2747f000 (fff)
  get Phys(data[n=4+1000]=f6c7f000)
AtapiVirtToPhysAddr_: f6c7f000 -> 00000000:27488000
  ph data[4]=0:27488000 (fff)
  get Phys(data[n=5+1000]=f6c80000)
AtapiVirtToPhysAddr_: f6c80000 -> 00000000:27489000
  ph data[4]=0:27488000 (1fff)
  get Phys(data[n=5+2000]=f6c81000)
AtapiVirtToPhysAddr_: f6c81000 -> 00000000:2748a000
  ph data[4]=0:27488000 (2fff)
  get Phys(data[n=5+3000]=f6c82000)
AtapiVirtToPhysAddr_: f6c82000 -> 00000000:2748b000
  ph data[4]=0:27488000 (3fff)
  get Phys(data[n=5+4000]=f6c83000)
AtapiVirtToPhysAddr_: f6c83000 -> 00000000:27494000
  ph data[5]=0:27494000 (fff)
  get Phys(data[n=6+1000]=f6c84000)
AtapiVirtToPhysAddr_: f6c84000 -> 00000000:27495000
  ph data[5]=0:27494000 (1fff)
  get Phys(data[n=6+2000]=f6c85000)
AtapiVirtToPhysAddr_: f6c85000 -> 00000000:2748e000
  ph data[6]=0:2748e000 (fff)
  get Phys(data[n=7+1000]=f6c86000)
AtapiVirtToPhysAddr_: f6c86000 -> 00000000:27487000
  ph data[7]=0:27487000 (fff)
  get Phys(data[n=8+1000]=f6c87000)
AtapiVirtToPhysAddr_: f6c87000 -> 00000000:27490000
  set TERM
  ph data[8]=0:27490000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677f180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 7 request(s)!
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f1d640, CDB 0xb5f1d670, AtaReq 0xb677b078, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=7
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf705f5c0
** Ide: Command AtaReq 0xb677b078
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 390082f0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390082f0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f6c88000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f6c88000)
AtapiVirtToPhysAddr_: f6c88000 -> 00000000:27491000
  ph data[0]=0:27491000 (fff)
  get Phys(data[n=1+1000]=f6c89000)
AtapiVirtToPhysAddr_: f6c89000 -> 00000000:27492000
  ph data[0]=0:27491000 (1fff)
  get Phys(data[n=1+2000]=f6c8a000)
AtapiVirtToPhysAddr_: f6c8a000 -> 00000000:27493000
  ph data[0]=0:27491000 (2fff)
  get Phys(data[n=1+3000]=f6c8b000)
AtapiVirtToPhysAddr_: f6c8b000 -> 00000000:2749c000
  ph data[1]=0:2749c000 (fff)
  get Phys(data[n=2+1000]=f6c8c000)
AtapiVirtToPhysAddr_: f6c8c000 -> 00000000:2749d000
  ph data[1]=0:2749c000 (1fff)
  get Phys(data[n=2+2000]=f6c8d000)
AtapiVirtToPhysAddr_: f6c8d000 -> 00000000:27496000
  ph data[2]=0:27496000 (fff)
  get Phys(data[n=3+1000]=f6c8e000)
AtapiVirtToPhysAddr_: f6c8e000 -> 00000000:2748f000
  ph data[3]=0:2748f000 (fff)
  get Phys(data[n=4+1000]=f6c8f000)
AtapiVirtToPhysAddr_: f6c8f000 -> 00000000:27498000
  ph data[4]=0:27498000 (fff)
  get Phys(data[n=5+1000]=f6c90000)
AtapiVirtToPhysAddr_: f6c90000 -> 00000000:27499000
  ph data[4]=0:27498000 (1fff)
  get Phys(data[n=5+2000]=f6c91000)
AtapiVirtToPhysAddr_: f6c91000 -> 00000000:2749a000
  ph data[4]=0:27498000 (2fff)
  get Phys(data[n=5+3000]=f6c92000)
AtapiVirtToPhysAddr_: f6c92000 -> 00000000:2749b000
  ph data[4]=0:27498000 (3fff)
  get Phys(data[n=5+4000]=f6c93000)
AtapiVirtToPhysAddr_: f6c93000 -> 00000000:274a4000
  ph data[5]=0:274a4000 (fff)
  get Phys(data[n=6+1000]=f6c94000)
AtapiVirtToPhysAddr_: f6c94000 -> 00000000:274a5000
  ph data[5]=0:274a4000 (1fff)
  get Phys(data[n=6+2000]=f6c95000)
AtapiVirtToPhysAddr_: f6c95000 -> 00000000:2749e000
  ph data[6]=0:2749e000 (fff)
  get Phys(data[n=7+1000]=f6c96000)
AtapiVirtToPhysAddr_: f6c96000 -> 00000000:27497000
  ph data[7]=0:27497000 (fff)
  get Phys(data[n=8+1000]=f6c97000)
AtapiVirtToPhysAddr_: f6c97000 -> 00000000:274a0000
  set TERM
  ph data[8]=0:274a0000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 8 request(s)!
AtapiStartIo: next Srb b5f1d640
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 3d00, WordsLeft 3d00
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 7a00, full size 7a00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0xb5f1da68
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f1da68, CDB 0xb5f1da98, AtaReq 0xb677e0c0, SCmd 0x2a
UniataNeedQueueing: qd=7
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677e0c0
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39008170, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677e0c0
  AHCI AtaReq CMD 0xb677e180 (ph 0x8e41180)
  prd_length 0x9, flags 0x45, base 8e41180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f1da68
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f1da68, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f1da68
AtapiInterrupt: NextRequest, srb=0xb5f0f138
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb677f0d8, SCmd 0x2a
UniataNeedQueueing: qd=6
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff484
** Ide: Command AtaReq 0xb677f0d8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39008270, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677f0d8
  AHCI AtaReq CMD 0xb677f180 (ph 0x8e42180)
  prd_length 0x9, flags 0x45, base 8e42180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f1da68, CDB 0xb5f1da98, AtaReq 0xb677e0c0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=6
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff60c
** Ide: Command AtaReq 0xb677e0c0
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fee4c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fee4c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677e0c0: cmd aligned b677e180, d=60
  ahci_cmd_ptr 0xb677e180
AtapiDmaSetup: mode 0x0, data f6f9a000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677e180)
AtapiVirtToPhysAddr_: b677e180 -> 00000000:08e41180
  get Phys(data[0]=f6f9a000)
AtapiVirtToPhysAddr_: f6f9a000 -> 00000000:1dcf9000
  ph data[0]=0:1dcf9000 (fff)
  get Phys(data[n=1+1000]=f6f9b000)
AtapiVirtToPhysAddr_: f6f9b000 -> 00000000:1dcfa000
  set TERM
  ph data[0]=0:1dcf9000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677e180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 7 request(s)!
AtapiStartIo: next Srb b5f1da68
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f0f138, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f0f138
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: qd=6
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390081f0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x9, flags 0x45, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6781108, SCmd 0x28
UniataNeedQueueing: qd=5
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6781108
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc0050, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108
  AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180)
  prd_length 0x1, flags 0x5, base 8e44180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb5f10448
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f10448, CDB 0xb5f10478, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=4
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3960ae60, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0xa, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f10448
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=4
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c9230
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffb880, OrigWordsRequested 0x8200, DevSize 0x82
IdeReadWrite (REQ): Starting sector is 38ffb880, Number of WORDS 0x8200, DevSize 0x82
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7012000, count 10400, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7012000)
AtapiVirtToPhysAddr_: f7012000 -> 00000000:1dd07000
  ph data[0]=0:1dd07000 (fff)
  get Phys(data[n=1+1000]=f7013000)
AtapiVirtToPhysAddr_: f7013000 -> 00000000:1dd10000
  ph data[1]=0:1dd10000 (fff)
  get Phys(data[n=2+1000]=f7014000)
AtapiVirtToPhysAddr_: f7014000 -> 00000000:1dd11000
  ph data[1]=0:1dd10000 (1fff)
  get Phys(data[n=2+2000]=f7015000)
AtapiVirtToPhysAddr_: f7015000 -> 00000000:1dd12000
  ph data[1]=0:1dd10000 (2fff)
  get Phys(data[n=2+3000]=f7016000)
AtapiVirtToPhysAddr_: f7016000 -> 00000000:1dd13000
  ph data[1]=0:1dd10000 (3fff)
  get Phys(data[n=2+4000]=f7017000)
AtapiVirtToPhysAddr_: f7017000 -> 00000000:1dd0c000
  ph data[2]=0:1dd0c000 (fff)
  get Phys(data[n=3+1000]=f7018000)
AtapiVirtToPhysAddr_: f7018000 -> 00000000:1dd15000
  ph data[3]=0:1dd15000 (fff)
  get Phys(data[n=4+1000]=f7019000)
AtapiVirtToPhysAddr_: f7019000 -> 00000000:1dd0e000
  ph data[4]=0:1dd0e000 (fff)
  get Phys(data[n=5+1000]=f701a000)
AtapiVirtToPhysAddr_: f701a000 -> 00000000:1dd0f000
  ph data[4]=0:1dd0e000 (1fff)
  get Phys(data[n=5+2000]=f701b000)
AtapiVirtToPhysAddr_: f701b000 -> 00000000:1dd18000
  ph data[5]=0:1dd18000 (fff)
  get Phys(data[n=6+1000]=f701c000)
AtapiVirtToPhysAddr_: f701c000 -> 00000000:1dd19000
  ph data[5]=0:1dd18000 (1fff)
  get Phys(data[n=6+2000]=f701d000)
AtapiVirtToPhysAddr_: f701d000 -> 00000000:1dd1a000
  ph data[5]=0:1dd18000 (2fff)
  get Phys(data[n=6+3000]=f701e000)
AtapiVirtToPhysAddr_: f701e000 -> 00000000:1dd1b000
  ph data[5]=0:1dd18000 (3fff)
  get Phys(data[n=6+4000]=f701f000)
AtapiVirtToPhysAddr_: f701f000 -> 00000000:1dd14000
  ph data[6]=0:1dd14000 (fff)
  get Phys(data[n=7+1000]=f7020000)
AtapiVirtToPhysAddr_: f7020000 -> 00000000:1dd1d000
  ph data[7]=0:1dd1d000 (fff)
  get Phys(data[n=8+1000]=f7021000)
AtapiVirtToPhysAddr_: f7021000 -> 00000000:1dd16000
  ph data[8]=0:1dd16000 (fff)
  get Phys(data[n=9+1000]=f7022000)
AtapiVirtToPhysAddr_: f7022000 -> 00000000:1dd17000
  set TERM
  ph data[8]=0:1dd16000 (13ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 5 request(s)!
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f10448, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f10448
AtapiInterrupt: NextRequest, srb=0xb635b910
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb635b910, CDB 0xb635b940, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: qd=4
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb67800f0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3960aee0, Count 0x3d(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0
  AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180)
  prd_length 0x5, flags 0x5, base 8e43180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b635b910
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 3d00, WordsLeft 3d00
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 7a00, full size 7a00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb635b910, status 1
AtapiInterrupt: RequestComplete, srb 0xb635b910
AtapiInterrupt: NextRequest, srb=0xb5f1da68
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f1da68, CDB 0xb5f1da98, AtaReq 0xb677e0c0, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677e0c0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fee4c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677e0c0
  AHCI AtaReq CMD 0xb677e180 (ph 0x8e41180)
  prd_length 0x1, flags 0x5, base 8e41180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f1da68
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f1da68, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f1da68
AtapiInterrupt: NextRequest, srb=0xb6719698
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6719698, CDB 0xb67196c8, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdc3c
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffb880, Count 0x82(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x9, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6719698
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
Boot took 54749502104 cycles!
Interrupts: 63798 System Calls: 74544 Context Switches: 62041
(ntoskrnl/config/cmcontrl.c:270) CmpSaveBootControlSet(1)
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8200, WordsLeft 8200
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10400, full size 10400
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6719698, status 1
AtapiInterrupt: RequestComplete, srb 0xb6719698
AtapiInterrupt: NextRequest, srb=0xb5f1d640
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f1d640, CDB 0xb5f1d670, AtaReq 0xb677b078, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff8dc
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390082f0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x9, flags 0x45, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f1d640
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f1d640, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f1d640
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f10448, CDB 0xb5f10478, AtaReq 0xb677b078, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb5f10448
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf705f5c0
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39008170, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39008170, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f6c58000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f6c58000)
AtapiVirtToPhysAddr_: f6c58000 -> 00000000:27461000
  ph data[0]=0:27461000 (fff)
  get Phys(data[n=1+1000]=f6c59000)
AtapiVirtToPhysAddr_: f6c59000 -> 00000000:27462000
  ph data[0]=0:27461000 (1fff)
  get Phys(data[n=1+2000]=f6c5a000)
AtapiVirtToPhysAddr_: f6c5a000 -> 00000000:27463000
  ph data[0]=0:27461000 (2fff)
  get Phys(data[n=1+3000]=f6c5b000)
AtapiVirtToPhysAddr_: f6c5b000 -> 00000000:2746c000
  ph data[1]=0:2746c000 (fff)
  get Phys(data[n=2+1000]=f6c5c000)
AtapiVirtToPhysAddr_: f6c5c000 -> 00000000:2746d000
  ph data[1]=0:2746c000 (1fff)
  get Phys(data[n=2+2000]=f6c5d000)
AtapiVirtToPhysAddr_: f6c5d000 -> 00000000:27466000
  ph data[2]=0:27466000 (fff)
  get Phys(data[n=3+1000]=f6c5e000)
AtapiVirtToPhysAddr_: f6c5e000 -> 00000000:2745f000
  ph data[3]=0:2745f000 (fff)
  get Phys(data[n=4+1000]=f6c5f000)
AtapiVirtToPhysAddr_: f6c5f000 -> 00000000:27468000
  ph data[4]=0:27468000 (fff)
  get Phys(data[n=5+1000]=f6c60000)
AtapiVirtToPhysAddr_: f6c60000 -> 00000000:27469000
  ph data[4]=0:27468000 (1fff)
  get Phys(data[n=5+2000]=f6c61000)
AtapiVirtToPhysAddr_: f6c61000 -> 00000000:2746a000
  ph data[4]=0:27468000 (2fff)
  get Phys(data[n=5+3000]=f6c62000)
AtapiVirtToPhysAddr_: f6c62000 -> 00000000:2746b000
  ph data[4]=0:27468000 (3fff)
  get Phys(data[n=5+4000]=f6c63000)
AtapiVirtToPhysAddr_: f6c63000 -> 00000000:27474000
  ph data[5]=0:27474000 (fff)
  get Phys(data[n=6+1000]=f6c64000)
AtapiVirtToPhysAddr_: f6c64000 -> 00000000:27475000
  ph data[5]=0:27474000 (1fff)
  get Phys(data[n=6+2000]=f6c65000)
AtapiVirtToPhysAddr_: f6c65000 -> 00000000:2746e000
  ph data[6]=0:2746e000 (fff)
  get Phys(data[n=7+1000]=f6c66000)
AtapiVirtToPhysAddr_: f6c66000 -> 00000000:27467000
  ph data[7]=0:27467000 (fff)
  get Phys(data[n=8+1000]=f6c67000)
AtapiVirtToPhysAddr_: f6c67000 -> 00000000:27470000
  set TERM
  ph data[8]=0:27470000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39008170, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x9, flags 0x45, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f10448
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf705f5c0
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 390081f0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390081f0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f6c68000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f6c68000)
AtapiVirtToPhysAddr_: f6c68000 -> 00000000:27471000
  ph data[0]=0:27471000 (fff)
  get Phys(data[n=1+1000]=f6c69000)
AtapiVirtToPhysAddr_: f6c69000 -> 00000000:27472000
  ph data[0]=0:27471000 (1fff)
  get Phys(data[n=1+2000]=f6c6a000)
AtapiVirtToPhysAddr_: f6c6a000 -> 00000000:27473000
  ph data[0]=0:27471000 (2fff)
  get Phys(data[n=1+3000]=f6c6b000)
AtapiVirtToPhysAddr_: f6c6b000 -> 00000000:2747c000
  ph data[1]=0:2747c000 (fff)
  get Phys(data[n=2+1000]=f6c6c000)
AtapiVirtToPhysAddr_: f6c6c000 -> 00000000:2747d000
  ph data[1]=0:2747c000 (1fff)
  get Phys(data[n=2+2000]=f6c6d000)
AtapiVirtToPhysAddr_: f6c6d000 -> 00000000:27476000
  ph data[2]=0:27476000 (fff)
  get Phys(data[n=3+1000]=f6c6e000)
AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:2746f000
  ph data[3]=0:2746f000 (fff)
  get Phys(data[n=4+1000]=f6c6f000)
AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:27478000
  ph data[4]=0:27478000 (fff)
  get Phys(data[n=5+1000]=f6c70000)
AtapiVirtToPhysAddr_: f6c70000 -> 00000000:27479000
  ph data[4]=0:27478000 (1fff)
  get Phys(data[n=5+2000]=f6c71000)
AtapiVirtToPhysAddr_: f6c71000 -> 00000000:2747a000
  ph data[4]=0:27478000 (2fff)
  get Phys(data[n=5+3000]=f6c72000)
AtapiVirtToPhysAddr_: f6c72000 -> 00000000:2747b000
  ph data[4]=0:27478000 (3fff)
  get Phys(data[n=5+4000]=f6c73000)
AtapiVirtToPhysAddr_: f6c73000 -> 00000000:27484000
  ph data[5]=0:27484000 (fff)
  get Phys(data[n=6+1000]=f6c74000)
AtapiVirtToPhysAddr_: f6c74000 -> 00000000:27485000
  ph data[5]=0:27484000 (1fff)
  get Phys(data[n=6+2000]=f6c75000)
AtapiVirtToPhysAddr_: f6c75000 -> 00000000:2747e000
  ph data[6]=0:2747e000 (fff)
  get Phys(data[n=7+1000]=f6c76000)
AtapiVirtToPhysAddr_: f6c76000 -> 00000000:27477000
  ph data[7]=0:27477000 (fff)
  get Phys(data[n=8+1000]=f6c77000)
AtapiVirtToPhysAddr_: f6c77000 -> 00000000:27480000
  set TERM
  ph data[8]=0:27480000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf705f5c0
** Ide: Command AtaReq 0xb67800f0
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39008270, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39008270, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb67800f0: cmd aligned b6780180, d=30
  ahci_cmd_ptr 0xb6780180
AtapiDmaSetup: mode 0x0, data f6c78000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6780180)
AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180
  get Phys(data[0]=f6c78000)
AtapiVirtToPhysAddr_: f6c78000 -> 00000000:27481000
  ph data[0]=0:27481000 (fff)
  get Phys(data[n=1+1000]=f6c79000)
AtapiVirtToPhysAddr_: f6c79000 -> 00000000:27482000
  ph data[0]=0:27481000 (1fff)
  get Phys(data[n=1+2000]=f6c7a000)
AtapiVirtToPhysAddr_: f6c7a000 -> 00000000:27483000
  ph data[0]=0:27481000 (2fff)
  get Phys(data[n=1+3000]=f6c7b000)
AtapiVirtToPhysAddr_: f6c7b000 -> 00000000:2748c000
  ph data[1]=0:2748c000 (fff)
  get Phys(data[n=2+1000]=f6c7c000)
AtapiVirtToPhysAddr_: f6c7c000 -> 00000000:2748d000
  ph data[1]=0:2748c000 (1fff)
  get Phys(data[n=2+2000]=f6c7d000)
AtapiVirtToPhysAddr_: f6c7d000 -> 00000000:27486000
  ph data[2]=0:27486000 (fff)
  get Phys(data[n=3+1000]=f6c7e000)
AtapiVirtToPhysAddr_: f6c7e000 -> 00000000:2747f000
  ph data[3]=0:2747f000 (fff)
  get Phys(data[n=4+1000]=f6c7f000)
AtapiVirtToPhysAddr_: f6c7f000 -> 00000000:27488000
  ph data[4]=0:27488000 (fff)
  get Phys(data[n=5+1000]=f6c80000)
AtapiVirtToPhysAddr_: f6c80000 -> 00000000:27489000
  ph data[4]=0:27488000 (1fff)
  get Phys(data[n=5+2000]=f6c81000)
AtapiVirtToPhysAddr_: f6c81000 -> 00000000:2748a000
  ph data[4]=0:27488000 (2fff)
  get Phys(data[n=5+3000]=f6c82000)
AtapiVirtToPhysAddr_: f6c82000 -> 00000000:2748b000
  ph data[4]=0:27488000 (3fff)
  get Phys(data[n=5+4000]=f6c83000)
AtapiVirtToPhysAddr_: f6c83000 -> 00000000:27494000
  ph data[5]=0:27494000 (fff)
  get Phys(data[n=6+1000]=f6c84000)
AtapiVirtToPhysAddr_: f6c84000 -> 00000000:27495000
  ph data[5]=0:27494000 (1fff)
  get Phys(data[n=6+2000]=f6c85000)
AtapiVirtToPhysAddr_: f6c85000 -> 00000000:2748e000
  ph data[6]=0:2748e000 (fff)
  get Phys(data[n=7+1000]=f6c86000)
AtapiVirtToPhysAddr_: f6c86000 -> 00000000:27487000
  ph data[7]=0:27487000 (fff)
  get Phys(data[n=8+1000]=f6c87000)
AtapiVirtToPhysAddr_: f6c87000 -> 00000000:27490000
  set TERM
  ph data[8]=0:27490000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6780180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f10448, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f10448
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf705f41c
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390081f0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x9, flags 0x45, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f10448, CDB 0xb5f10478, AtaReq 0xb677b078, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf705f5c0
** Ide: Command AtaReq 0xb677b078
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 390082f0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390082f0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f6c88000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f6c88000)
AtapiVirtToPhysAddr_: f6c88000 -> 00000000:27491000
  ph data[0]=0:27491000 (fff)
  get Phys(data[n=1+1000]=f6c89000)
AtapiVirtToPhysAddr_: f6c89000 -> 00000000:27492000
  ph data[0]=0:27491000 (1fff)
  get Phys(data[n=1+2000]=f6c8a000)
AtapiVirtToPhysAddr_: f6c8a000 -> 00000000:27493000
  ph data[0]=0:27491000 (2fff)
  get Phys(data[n=1+3000]=f6c8b000)
AtapiVirtToPhysAddr_: f6c8b000 -> 00000000:2749c000
  ph data[1]=0:2749c000 (fff)
  get Phys(data[n=2+1000]=f6c8c000)
AtapiVirtToPhysAddr_: f6c8c000 -> 00000000:2749d000
  ph data[1]=0:2749c000 (1fff)
  get Phys(data[n=2+2000]=f6c8d000)
AtapiVirtToPhysAddr_: f6c8d000 -> 00000000:27496000
  ph data[2]=0:27496000 (fff)
  get Phys(data[n=3+1000]=f6c8e000)
AtapiVirtToPhysAddr_: f6c8e000 -> 00000000:2748f000
  ph data[3]=0:2748f000 (fff)
  get Phys(data[n=4+1000]=f6c8f000)
AtapiVirtToPhysAddr_: f6c8f000 -> 00000000:27498000
  ph data[4]=0:27498000 (fff)
  get Phys(data[n=5+1000]=f6c90000)
AtapiVirtToPhysAddr_: f6c90000 -> 00000000:27499000
  ph data[4]=0:27498000 (1fff)
  get Phys(data[n=5+2000]=f6c91000)
AtapiVirtToPhysAddr_: f6c91000 -> 00000000:2749a000
  ph data[4]=0:27498000 (2fff)
  get Phys(data[n=5+3000]=f6c92000)
AtapiVirtToPhysAddr_: f6c92000 -> 00000000:2749b000
  ph data[4]=0:27498000 (3fff)
  get Phys(data[n=5+4000]=f6c93000)
AtapiVirtToPhysAddr_: f6c93000 -> 00000000:274a4000
  ph data[5]=0:274a4000 (fff)
  get Phys(data[n=6+1000]=f6c94000)
AtapiVirtToPhysAddr_: f6c94000 -> 00000000:274a5000
  ph data[5]=0:274a4000 (1fff)
  get Phys(data[n=6+2000]=f6c95000)
AtapiVirtToPhysAddr_: f6c95000 -> 00000000:2749e000
  ph data[6]=0:2749e000 (fff)
  get Phys(data[n=7+1000]=f6c96000)
AtapiVirtToPhysAddr_: f6c96000 -> 00000000:27497000
  ph data[7]=0:27497000 (fff)
  get Phys(data[n=8+1000]=f6c97000)
AtapiVirtToPhysAddr_: f6c97000 -> 00000000:274a0000
  set TERM
  ph data[8]=0:274a0000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b5f10448
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb5f0f138
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb67800f0
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39008270, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0
  AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180)
  prd_length 0x9, flags 0x45, base 8e43180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f0f138, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f0f138
AtapiInterrupt: NextRequest, srb=0xb5f10448
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f10448, CDB 0xb5f10478, AtaReq 0xb677b078, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c9724
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390082f0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x9, flags 0x45, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f10448
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f10448, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f10448
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f10448, CDB 0xb5f10478, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5f10448
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c9600
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fde350, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fde350, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f6c58000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f6c58000)
AtapiVirtToPhysAddr_: f6c58000 -> 00000000:1d468000
  ph data[0]=0:1d468000 (fff)
  get Phys(data[n=1+1000]=f6c59000)
AtapiVirtToPhysAddr_: f6c59000 -> 00000000:1d461000
  ph data[1]=0:1d461000 (fff)
  get Phys(data[n=2+1000]=f6c5a000)
AtapiVirtToPhysAddr_: f6c5a000 -> 00000000:1d45a000
  ph data[2]=0:1d45a000 (fff)
  get Phys(data[n=3+1000]=f6c5b000)
AtapiVirtToPhysAddr_: f6c5b000 -> 00000000:1d45b000
  ph data[2]=0:1d45a000 (1fff)
  get Phys(data[n=3+2000]=f6c5c000)
AtapiVirtToPhysAddr_: f6c5c000 -> 00000000:1d44c000
  ph data[3]=0:1d44c000 (fff)
  get Phys(data[n=4+1000]=f6c5d000)
AtapiVirtToPhysAddr_: f6c5d000 -> 00000000:1d44d000
  ph data[3]=0:1d44c000 (1fff)
  get Phys(data[n=4+2000]=f6c5e000)
AtapiVirtToPhysAddr_: f6c5e000 -> 00000000:1d45e000
  ph data[4]=0:1d45e000 (fff)
  get Phys(data[n=5+1000]=f6c5f000)
AtapiVirtToPhysAddr_: f6c5f000 -> 00000000:1d46f000
  ph data[5]=0:1d46f000 (fff)
  get Phys(data[n=6+1000]=f6c60000)
AtapiVirtToPhysAddr_: f6c60000 -> 00000000:1d470000
  ph data[5]=0:1d46f000 (1fff)
  get Phys(data[n=6+2000]=f6c61000)
AtapiVirtToPhysAddr_: f6c61000 -> 00000000:1d469000
  ph data[6]=0:1d469000 (fff)
  get Phys(data[n=7+1000]=f6c62000)
AtapiVirtToPhysAddr_: f6c62000 -> 00000000:1d462000
  ph data[7]=0:1d462000 (fff)
  get Phys(data[n=8+1000]=f6c63000)
AtapiVirtToPhysAddr_: f6c63000 -> 00000000:1d463000
  ph data[7]=0:1d462000 (1fff)
  get Phys(data[n=8+2000]=f6c64000)
AtapiVirtToPhysAddr_: f6c64000 -> 00000000:1d454000
  ph data[8]=0:1d454000 (fff)
  get Phys(data[n=9+1000]=f6c65000)
AtapiVirtToPhysAddr_: f6c65000 -> 00000000:1d455000
  ph data[8]=0:1d454000 (1fff)
  get Phys(data[n=9+2000]=f6c66000)
AtapiVirtToPhysAddr_: f6c66000 -> 00000000:1d466000
  ph data[9]=0:1d466000 (fff)
  get Phys(data[n=10+1000]=f6c67000)
AtapiVirtToPhysAddr_: f6c67000 -> 00000000:1d477000
  set TERM
  ph data[10]=0:1d477000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fde350, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0xb, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f10448
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c9600
** Ide: Command AtaReq 0xb67800f0
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fde3d0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fde3d0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb67800f0: cmd aligned b6780180, d=30
  ahci_cmd_ptr 0xb6780180
AtapiDmaSetup: mode 0x0, data f6c68000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6780180)
AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180
  get Phys(data[0]=f6c68000)
AtapiVirtToPhysAddr_: f6c68000 -> 00000000:1d478000
  ph data[0]=0:1d478000 (fff)
  get Phys(data[n=1+1000]=f6c69000)
AtapiVirtToPhysAddr_: f6c69000 -> 00000000:1d471000
  ph data[1]=0:1d471000 (fff)
  get Phys(data[n=2+1000]=f6c6a000)
AtapiVirtToPhysAddr_: f6c6a000 -> 00000000:1d46a000
  ph data[2]=0:1d46a000 (fff)
  get Phys(data[n=3+1000]=f6c6b000)
AtapiVirtToPhysAddr_: f6c6b000 -> 00000000:1d46b000
  ph data[2]=0:1d46a000 (1fff)
  get Phys(data[n=3+2000]=f6c6c000)
AtapiVirtToPhysAddr_: f6c6c000 -> 00000000:1d45c000
  ph data[3]=0:1d45c000 (fff)
  get Phys(data[n=4+1000]=f6c6d000)
AtapiVirtToPhysAddr_: f6c6d000 -> 00000000:1d45d000
  ph data[3]=0:1d45c000 (1fff)
  get Phys(data[n=4+2000]=f6c6e000)
AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:1d46e000
  ph data[4]=0:1d46e000 (fff)
  get Phys(data[n=5+1000]=f6c6f000)
AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:1d47f000
  ph data[5]=0:1d47f000 (fff)
  get Phys(data[n=6+1000]=f6c70000)
AtapiVirtToPhysAddr_: f6c70000 -> 00000000:1d480000
  ph data[5]=0:1d47f000 (1fff)
  get Phys(data[n=6+2000]=f6c71000)
AtapiVirtToPhysAddr_: f6c71000 -> 00000000:1d479000
  ph data[6]=0:1d479000 (fff)
  get Phys(data[n=7+1000]=f6c72000)
AtapiVirtToPhysAddr_: f6c72000 -> 00000000:1d472000
  ph data[7]=0:1d472000 (fff)
  get Phys(data[n=8+1000]=f6c73000)
AtapiVirtToPhysAddr_: f6c73000 -> 00000000:1d473000
  ph data[7]=0:1d472000 (1fff)
  get Phys(data[n=8+2000]=f6c74000)
AtapiVirtToPhysAddr_: f6c74000 -> 00000000:1d464000
  ph data[8]=0:1d464000 (fff)
  get Phys(data[n=9+1000]=f6c75000)
AtapiVirtToPhysAddr_: f6c75000 -> 00000000:1d465000
  ph data[8]=0:1d464000 (1fff)
  get Phys(data[n=9+2000]=f6c76000)
AtapiVirtToPhysAddr_: f6c76000 -> 00000000:1d476000
  ph data[9]=0:1d476000 (fff)
  get Phys(data[n=10+1000]=f6c77000)
AtapiVirtToPhysAddr_: f6c77000 -> 00000000:1d487000
  set TERM
  ph data[10]=0:1d487000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6780180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c9600
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fde450, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fde450, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f6c78000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f6c78000)
AtapiVirtToPhysAddr_: f6c78000 -> 00000000:1d488000
  ph data[0]=0:1d488000 (fff)
  get Phys(data[n=1+1000]=f6c79000)
AtapiVirtToPhysAddr_: f6c79000 -> 00000000:1d481000
  ph data[1]=0:1d481000 (fff)
  get Phys(data[n=2+1000]=f6c7a000)
AtapiVirtToPhysAddr_: f6c7a000 -> 00000000:1d47a000
  ph data[2]=0:1d47a000 (fff)
  get Phys(data[n=3+1000]=f6c7b000)
AtapiVirtToPhysAddr_: f6c7b000 -> 00000000:1d47b000
  ph data[2]=0:1d47a000 (1fff)
  get Phys(data[n=3+2000]=f6c7c000)
AtapiVirtToPhysAddr_: f6c7c000 -> 00000000:1d46c000
  ph data[3]=0:1d46c000 (fff)
  get Phys(data[n=4+1000]=f6c7d000)
AtapiVirtToPhysAddr_: f6c7d000 -> 00000000:1d46d000
  ph data[3]=0:1d46c000 (1fff)
  get Phys(data[n=4+2000]=f6c7e000)
AtapiVirtToPhysAddr_: f6c7e000 -> 00000000:1d47e000
  ph data[4]=0:1d47e000 (fff)
  get Phys(data[n=5+1000]=f6c7f000)
AtapiVirtToPhysAddr_: f6c7f000 -> 00000000:1d48f000
  ph data[5]=0:1d48f000 (fff)
  get Phys(data[n=6+1000]=f6c80000)
AtapiVirtToPhysAddr_: f6c80000 -> 00000000:1d490000
  ph data[5]=0:1d48f000 (1fff)
  get Phys(data[n=6+2000]=f6c81000)
AtapiVirtToPhysAddr_: f6c81000 -> 00000000:1d489000
  ph data[6]=0:1d489000 (fff)
  get Phys(data[n=7+1000]=f6c82000)
AtapiVirtToPhysAddr_: f6c82000 -> 00000000:1d482000
  ph data[7]=0:1d482000 (fff)
  get Phys(data[n=8+1000]=f6c83000)
AtapiVirtToPhysAddr_: f6c83000 -> 00000000:1d483000
  ph data[7]=0:1d482000 (1fff)
  get Phys(data[n=8+2000]=f6c84000)
AtapiVirtToPhysAddr_: f6c84000 -> 00000000:1d474000
  ph data[8]=0:1d474000 (fff)
  get Phys(data[n=9+1000]=f6c85000)
AtapiVirtToPhysAddr_: f6c85000 -> 00000000:1d475000
  ph data[8]=0:1d474000 (1fff)
  get Phys(data[n=9+2000]=f6c86000)
AtapiVirtToPhysAddr_: f6c86000 -> 00000000:1d486000
  ph data[9]=0:1d486000 (fff)
  get Phys(data[n=10+1000]=f6c87000)
AtapiVirtToPhysAddr_: f6c87000 -> 00000000:1d497000
  set TERM
  ph data[10]=0:1d497000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677e0c0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c9600
** Ide: Command AtaReq 0xb677e0c0
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fde4d0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fde4d0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677e0c0: cmd aligned b677e180, d=60
  ahci_cmd_ptr 0xb677e180
AtapiDmaSetup: mode 0x0, data f6c88000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677e180)
AtapiVirtToPhysAddr_: b677e180 -> 00000000:08e41180
  get Phys(data[0]=f6c88000)
AtapiVirtToPhysAddr_: f6c88000 -> 00000000:1d498000
  ph data[0]=0:1d498000 (fff)
  get Phys(data[n=1+1000]=f6c89000)
AtapiVirtToPhysAddr_: f6c89000 -> 00000000:1d491000
  ph data[1]=0:1d491000 (fff)
  get Phys(data[n=2+1000]=f6c8a000)
AtapiVirtToPhysAddr_: f6c8a000 -> 00000000:1d48a000
  ph data[2]=0:1d48a000 (fff)
  get Phys(data[n=3+1000]=f6c8b000)
AtapiVirtToPhysAddr_: f6c8b000 -> 00000000:1d48b000
  ph data[2]=0:1d48a000 (1fff)
  get Phys(data[n=3+2000]=f6c8c000)
AtapiVirtToPhysAddr_: f6c8c000 -> 00000000:1d47c000
  ph data[3]=0:1d47c000 (fff)
  get Phys(data[n=4+1000]=f6c8d000)
AtapiVirtToPhysAddr_: f6c8d000 -> 00000000:1d47d000
  ph data[3]=0:1d47c000 (1fff)
  get Phys(data[n=4+2000]=f6c8e000)
AtapiVirtToPhysAddr_: f6c8e000 -> 00000000:1d48e000
  ph data[4]=0:1d48e000 (fff)
  get Phys(data[n=5+1000]=f6c8f000)
AtapiVirtToPhysAddr_: f6c8f000 -> 00000000:1d49f000
  ph data[5]=0:1d49f000 (fff)
  get Phys(data[n=6+1000]=f6c90000)
AtapiVirtToPhysAddr_: f6c90000 -> 00000000:1d4a0000
  ph data[5]=0:1d49f000 (1fff)
  get Phys(data[n=6+2000]=f6c91000)
AtapiVirtToPhysAddr_: f6c91000 -> 00000000:1d499000
  ph data[6]=0:1d499000 (fff)
  get Phys(data[n=7+1000]=f6c92000)
AtapiVirtToPhysAddr_: f6c92000 -> 00000000:1d492000
  ph data[7]=0:1d492000 (fff)
  get Phys(data[n=8+1000]=f6c93000)
AtapiVirtToPhysAddr_: f6c93000 -> 00000000:1d493000
  ph data[7]=0:1d492000 (1fff)
  get Phys(data[n=8+2000]=f6c94000)
AtapiVirtToPhysAddr_: f6c94000 -> 00000000:1d484000
  ph data[8]=0:1d484000 (fff)
  get Phys(data[n=9+1000]=f6c95000)
AtapiVirtToPhysAddr_: f6c95000 -> 00000000:1d485000
  ph data[8]=0:1d484000 (1fff)
  get Phys(data[n=9+2000]=f6c96000)
AtapiVirtToPhysAddr_: f6c96000 -> 00000000:1d496000
  ph data[9]=0:1d496000 (fff)
  get Phys(data[n=10+1000]=f6c97000)
AtapiVirtToPhysAddr_: f6c97000 -> 00000000:1d4a7000
  set TERM
  ph data[10]=0:1d4a7000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677e180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f10448, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f10448
AtapiInterrupt: NextRequest, srb=0xb5f0f138
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb67800f0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fde3d0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0
  AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180)
  prd_length 0xb, flags 0x5, base 8e43180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f0f138, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f0f138
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fde450, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0xb, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb6346750
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677e0c0, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677e0c0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fde4d0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677e0c0
  AHCI AtaReq CMD 0xb677e180 (ph 0x8e41180)
  prd_length 0xb, flags 0x5, base 8e41180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677e0c0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6346750
TopLevel (3), AtaReq 0xb677e0c0
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c9230
** Ide: Command AtaReq 0xb677e0c0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffadd0, OrigWordsRequested 0x8200, DevSize 0x82
IdeReadWrite (REQ): Starting sector is 38ffadd0, Number of WORDS 0x8200, DevSize 0x82
  AtaReq 0xb677e0c0: cmd aligned b677e180, d=60
  ahci_cmd_ptr 0xb677e180
AtapiDmaSetup: mode 0x0, data f6fa6000, count 10400, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677e180)
AtapiVirtToPhysAddr_: b677e180 -> 00000000:08e41180
  get Phys(data[0]=f6fa6000)
AtapiVirtToPhysAddr_: f6fa6000 -> 00000000:1cc89000
  ph data[0]=0:1cc89000 (fff)
  get Phys(data[n=1+1000]=f6fa7000)
AtapiVirtToPhysAddr_: f6fa7000 -> 00000000:1cc8a000
  ph data[0]=0:1cc89000 (1fff)
  get Phys(data[n=1+2000]=f6fa8000)
AtapiVirtToPhysAddr_: f6fa8000 -> 00000000:1cc8b000
  ph data[0]=0:1cc89000 (2fff)
  get Phys(data[n=1+3000]=f6fa9000)
AtapiVirtToPhysAddr_: f6fa9000 -> 00000000:1cc94000
  ph data[1]=0:1cc94000 (fff)
  get Phys(data[n=2+1000]=f6faa000)
AtapiVirtToPhysAddr_: f6faa000 -> 00000000:1cc95000
  ph data[1]=0:1cc94000 (1fff)
  get Phys(data[n=2+2000]=f6fab000)
AtapiVirtToPhysAddr_: f6fab000 -> 00000000:1cc8e000
  ph data[2]=0:1cc8e000 (fff)
  get Phys(data[n=3+1000]=f6fac000)
AtapiVirtToPhysAddr_: f6fac000 -> 00000000:1cc8f000
  ph data[2]=0:1cc8e000 (1fff)
  get Phys(data[n=3+2000]=f6fad000)
AtapiVirtToPhysAddr_: f6fad000 -> 00000000:1cc90000
  ph data[2]=0:1cc8e000 (2fff)
  get Phys(data[n=3+3000]=f6fae000)
AtapiVirtToPhysAddr_: f6fae000 -> 00000000:1cc91000
  ph data[2]=0:1cc8e000 (3fff)
  get Phys(data[n=3+4000]=f6faf000)
AtapiVirtToPhysAddr_: f6faf000 -> 00000000:1cc92000
  ph data[2]=0:1cc8e000 (4fff)
  get Phys(data[n=3+5000]=f6fb0000)
AtapiVirtToPhysAddr_: f6fb0000 -> 00000000:1cc93000
  ph data[2]=0:1cc8e000 (5fff)
  get Phys(data[n=3+6000]=f6fb1000)
AtapiVirtToPhysAddr_: f6fb1000 -> 00000000:1cc9c000
  ph data[3]=0:1cc9c000 (fff)
  get Phys(data[n=4+1000]=f6fb2000)
AtapiVirtToPhysAddr_: f6fb2000 -> 00000000:1cc9d000
  ph data[3]=0:1cc9c000 (1fff)
  get Phys(data[n=4+2000]=f6fb3000)
AtapiVirtToPhysAddr_: f6fb3000 -> 00000000:1cc96000
  ph data[4]=0:1cc96000 (fff)
  get Phys(data[n=5+1000]=f6fb4000)
AtapiVirtToPhysAddr_: f6fb4000 -> 00000000:1cc97000
  ph data[4]=0:1cc96000 (1fff)
  get Phys(data[n=5+2000]=f6fb5000)
AtapiVirtToPhysAddr_: f6fb5000 -> 00000000:1cc98000
  ph data[4]=0:1cc96000 (2fff)
  get Phys(data[n=5+3000]=f6fb6000)
AtapiVirtToPhysAddr_: f6fb6000 -> 00000000:1cc99000
  set TERM
  ph data[4]=0:1cc96000 (33ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677e180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffadd0, Count 0x82(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677e0c0
  AHCI AtaReq CMD 0xb677e180 (ph 0x8e41180)
  prd_length 0x5, flags 0x5, base 8e41180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8200, WordsLeft 8200
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10400, full size 10400
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677e0c0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6346750
TopLevel (3), AtaReq 0xb677e0c0
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c9230
** Ide: Command AtaReq 0xb677e0c0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffab90, OrigWordsRequested 0x8200, DevSize 0x82
IdeReadWrite (REQ): Starting sector is 38ffab90, Number of WORDS 0x8200, DevSize 0x82
  AtaReq 0xb677e0c0: cmd aligned b677e180, d=60
  ahci_cmd_ptr 0xb677e180
AtapiDmaSetup: mode 0x0, data f6fa6000, count 10400, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677e180)
AtapiVirtToPhysAddr_: b677e180 -> 00000000:08e41180
  get Phys(data[0]=f6fa6000)
AtapiVirtToPhysAddr_: f6fa6000 -> 00000000:1c40a000
  ph data[0]=0:1c40a000 (fff)
  get Phys(data[n=1+1000]=f6fa7000)
AtapiVirtToPhysAddr_: f6fa7000 -> 00000000:1c40b000
  ph data[0]=0:1c40a000 (1fff)
  get Phys(data[n=1+2000]=f6fa8000)
AtapiVirtToPhysAddr_: f6fa8000 -> 00000000:1c40c000
  ph data[0]=0:1c40a000 (2fff)
  get Phys(data[n=1+3000]=f6fa9000)
AtapiVirtToPhysAddr_: f6fa9000 -> 00000000:1c40d000
  ph data[0]=0:1c40a000 (3fff)
  get Phys(data[n=1+4000]=f6faa000)
AtapiVirtToPhysAddr_: f6faa000 -> 00000000:1c406000
  ph data[1]=0:1c406000 (fff)
  get Phys(data[n=2+1000]=f6fab000)
AtapiVirtToPhysAddr_: f6fab000 -> 00000000:1c407000
  ph data[1]=0:1c406000 (1fff)
  get Phys(data[n=2+2000]=f6fac000)
AtapiVirtToPhysAddr_: f6fac000 -> 00000000:1c408000
  ph data[1]=0:1c406000 (2fff)
  get Phys(data[n=2+3000]=f6fad000)
AtapiVirtToPhysAddr_: f6fad000 -> 00000000:1c409000
  ph data[1]=0:1c406000 (3fff)
  get Phys(data[n=2+4000]=f6fae000)
AtapiVirtToPhysAddr_: f6fae000 -> 00000000:1c412000
  ph data[2]=0:1c412000 (fff)
  get Phys(data[n=3+1000]=f6faf000)
AtapiVirtToPhysAddr_: f6faf000 -> 00000000:1c413000
  ph data[2]=0:1c412000 (1fff)
  get Phys(data[n=3+2000]=f6fb0000)
AtapiVirtToPhysAddr_: f6fb0000 -> 00000000:1c414000
  ph data[2]=0:1c412000 (2fff)
  get Phys(data[n=3+3000]=f6fb1000)
AtapiVirtToPhysAddr_: f6fb1000 -> 00000000:1c415000
  ph data[2]=0:1c412000 (3fff)
  get Phys(data[n=3+4000]=f6fb2000)
AtapiVirtToPhysAddr_: f6fb2000 -> 00000000:1c40e000
  ph data[3]=0:1c40e000 (fff)
  get Phys(data[n=4+1000]=f6fb3000)
AtapiVirtToPhysAddr_: f6fb3000 -> 00000000:1c40f000
  ph data[3]=0:1c40e000 (1fff)
  get Phys(data[n=4+2000]=f6fb4000)
AtapiVirtToPhysAddr_: f6fb4000 -> 00000000:1c410000
  ph data[3]=0:1c40e000 (2fff)
  get Phys(data[n=4+3000]=f6fb5000)
AtapiVirtToPhysAddr_: f6fb5000 -> 00000000:1c411000
  ph data[3]=0:1c40e000 (3fff)
  get Phys(data[n=4+4000]=f6fb6000)
AtapiVirtToPhysAddr_: f6fb6000 -> 00000000:1c41a000
  set TERM
  ph data[4]=0:1c41a000 (3ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677e180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffab90, Count 0x82(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677e0c0
  AHCI AtaReq CMD 0xb677e180 (ph 0x8e41180)
  prd_length 0x5, flags 0x5, base 8e41180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8200, WordsLeft 8200
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10400, full size 10400
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677e0c0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6346750
TopLevel (3), AtaReq 0xb677e0c0
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c91e0
** Ide: Command AtaReq 0xb677e0c0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffa220, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffa220, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677e0c0: cmd aligned b677e180, d=60
  ahci_cmd_ptr 0xb677e180
AtapiDmaSetup: mode 0x0, data f6ff2000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677e180)
AtapiVirtToPhysAddr_: b677e180 -> 00000000:08e41180
  get Phys(data[0]=f6ff2000)
AtapiVirtToPhysAddr_: f6ff2000 -> 00000000:1b912000
  ph data[0]=0:1b912000 (fff)
  get Phys(data[n=1+1000]=f6ff3000)
AtapiVirtToPhysAddr_: f6ff3000 -> 00000000:1b913000
  ph data[0]=0:1b912000 (1fff)
  get Phys(data[n=1+2000]=f6ff4000)
AtapiVirtToPhysAddr_: f6ff4000 -> 00000000:1b914000
  ph data[0]=0:1b912000 (2fff)
  get Phys(data[n=1+3000]=f6ff5000)
AtapiVirtToPhysAddr_: f6ff5000 -> 00000000:1b915000
  ph data[0]=0:1b912000 (3fff)
  get Phys(data[n=1+4000]=f6ff6000)
AtapiVirtToPhysAddr_: f6ff6000 -> 00000000:1b90e000
  ph data[1]=0:1b90e000 (fff)
  get Phys(data[n=2+1000]=f6ff7000)
AtapiVirtToPhysAddr_: f6ff7000 -> 00000000:1b90f000
  ph data[1]=0:1b90e000 (1fff)
  get Phys(data[n=2+2000]=f6ff8000)
AtapiVirtToPhysAddr_: f6ff8000 -> 00000000:1b910000
  ph data[1]=0:1b90e000 (2fff)
  get Phys(data[n=2+3000]=f6ff9000)
AtapiVirtToPhysAddr_: f6ff9000 -> 00000000:1b911000
  ph data[1]=0:1b90e000 (3fff)
  get Phys(data[n=2+4000]=f6ffa000)
AtapiVirtToPhysAddr_: f6ffa000 -> 00000000:1b91a000
  ph data[2]=0:1b91a000 (fff)
  get Phys(data[n=3+1000]=f6ffb000)
AtapiVirtToPhysAddr_: f6ffb000 -> 00000000:1b91b000
  ph data[2]=0:1b91a000 (1fff)
  get Phys(data[n=3+2000]=f6ffc000)
AtapiVirtToPhysAddr_: f6ffc000 -> 00000000:1b91c000
  ph data[2]=0:1b91a000 (2fff)
  get Phys(data[n=3+3000]=f6ffd000)
AtapiVirtToPhysAddr_: f6ffd000 -> 00000000:1b91d000
  ph data[2]=0:1b91a000 (3fff)
  get Phys(data[n=3+4000]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:1b916000
  ph data[3]=0:1b916000 (fff)
  get Phys(data[n=4+1000]=f6fff000)
AtapiVirtToPhysAddr_: f6fff000 -> 00000000:1b917000
  ph data[3]=0:1b916000 (1fff)
  get Phys(data[n=4+2000]=f7000000)
AtapiVirtToPhysAddr_: f7000000 -> 00000000:1b918000
  ph data[3]=0:1b916000 (2fff)
  get Phys(data[n=4+3000]=f7001000)
AtapiVirtToPhysAddr_: f7001000 -> 00000000:1b919000
  set TERM
  ph data[3]=0:1b916000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677e180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffa220, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677e0c0
  AHCI AtaReq CMD 0xb677e180 (ph 0x8e41180)
  prd_length 0x4, flags 0x5, base 8e41180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c91e0
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffa2a0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffa2a0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7002000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7002000)
AtapiVirtToPhysAddr_: f7002000 -> 00000000:1b922000
  ph data[0]=0:1b922000 (fff)
  get Phys(data[n=1+1000]=f7003000)
AtapiVirtToPhysAddr_: f7003000 -> 00000000:1b923000
  ph data[0]=0:1b922000 (1fff)
  get Phys(data[n=1+2000]=f7004000)
AtapiVirtToPhysAddr_: f7004000 -> 00000000:1b924000
  ph data[0]=0:1b922000 (2fff)
  get Phys(data[n=1+3000]=f7005000)
AtapiVirtToPhysAddr_: f7005000 -> 00000000:1b925000
  ph data[0]=0:1b922000 (3fff)
  get Phys(data[n=1+4000]=f7006000)
AtapiVirtToPhysAddr_: f7006000 -> 00000000:1b91e000
  ph data[1]=0:1b91e000 (fff)
  get Phys(data[n=2+1000]=f7007000)
AtapiVirtToPhysAddr_: f7007000 -> 00000000:1b91f000
  ph data[1]=0:1b91e000 (1fff)
  get Phys(data[n=2+2000]=f7008000)
AtapiVirtToPhysAddr_: f7008000 -> 00000000:1b920000
  ph data[1]=0:1b91e000 (2fff)
  get Phys(data[n=2+3000]=f7009000)
AtapiVirtToPhysAddr_: f7009000 -> 00000000:1b921000
  ph data[1]=0:1b91e000 (3fff)
  get Phys(data[n=2+4000]=f700a000)
AtapiVirtToPhysAddr_: f700a000 -> 00000000:1b92a000
  ph data[2]=0:1b92a000 (fff)
  get Phys(data[n=3+1000]=f700b000)
AtapiVirtToPhysAddr_: f700b000 -> 00000000:1b92b000
  ph data[2]=0:1b92a000 (1fff)
  get Phys(data[n=3+2000]=f700c000)
AtapiVirtToPhysAddr_: f700c000 -> 00000000:1b92c000
  ph data[2]=0:1b92a000 (2fff)
  get Phys(data[n=3+3000]=f700d000)
AtapiVirtToPhysAddr_: f700d000 -> 00000000:1b92d000
  ph data[2]=0:1b92a000 (3fff)
  get Phys(data[n=3+4000]=f700e000)
AtapiVirtToPhysAddr_: f700e000 -> 00000000:1b926000
  ph data[3]=0:1b926000 (fff)
  get Phys(data[n=4+1000]=f700f000)
AtapiVirtToPhysAddr_: f700f000 -> 00000000:1b927000
  ph data[3]=0:1b926000 (1fff)
  get Phys(data[n=4+2000]=f7010000)
AtapiVirtToPhysAddr_: f7010000 -> 00000000:1b928000
  ph data[3]=0:1b926000 (2fff)
  get Phys(data[n=4+3000]=f7011000)
AtapiVirtToPhysAddr_: f7011000 -> 00000000:1b929000
  set TERM
  ph data[3]=0:1b926000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c91e0
** Ide: Command AtaReq 0xb67800f0
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffa320, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffa320, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb67800f0: cmd aligned b6780180, d=30
  ahci_cmd_ptr 0xb6780180
AtapiDmaSetup: mode 0x0, data f7012000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6780180)
AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180
  get Phys(data[0]=f7012000)
AtapiVirtToPhysAddr_: f7012000 -> 00000000:1b932000
  ph data[0]=0:1b932000 (fff)
  get Phys(data[n=1+1000]=f7013000)
AtapiVirtToPhysAddr_: f7013000 -> 00000000:1b933000
  ph data[0]=0:1b932000 (1fff)
  get Phys(data[n=1+2000]=f7014000)
AtapiVirtToPhysAddr_: f7014000 -> 00000000:1b934000
  ph data[0]=0:1b932000 (2fff)
  get Phys(data[n=1+3000]=f7015000)
AtapiVirtToPhysAddr_: f7015000 -> 00000000:1b935000
  ph data[0]=0:1b932000 (3fff)
  get Phys(data[n=1+4000]=f7016000)
AtapiVirtToPhysAddr_: f7016000 -> 00000000:1b92e000
  ph data[1]=0:1b92e000 (fff)
  get Phys(data[n=2+1000]=f7017000)
AtapiVirtToPhysAddr_: f7017000 -> 00000000:1b92f000
  ph data[1]=0:1b92e000 (1fff)
  get Phys(data[n=2+2000]=f7018000)
AtapiVirtToPhysAddr_: f7018000 -> 00000000:1b930000
  ph data[1]=0:1b92e000 (2fff)
  get Phys(data[n=2+3000]=f7019000)
AtapiVirtToPhysAddr_: f7019000 -> 00000000:1b931000
  ph data[1]=0:1b92e000 (3fff)
  get Phys(data[n=2+4000]=f701a000)
AtapiVirtToPhysAddr_: f701a000 -> 00000000:1b93a000
  ph data[2]=0:1b93a000 (fff)
  get Phys(data[n=3+1000]=f701b000)
AtapiVirtToPhysAddr_: f701b000 -> 00000000:1b93b000
  ph data[2]=0:1b93a000 (1fff)
  get Phys(data[n=3+2000]=f701c000)
AtapiVirtToPhysAddr_: f701c000 -> 00000000:1b93c000
  ph data[2]=0:1b93a000 (2fff)
  get Phys(data[n=3+3000]=f701d000)
AtapiVirtToPhysAddr_: f701d000 -> 00000000:1b93d000
  ph data[2]=0:1b93a000 (3fff)
  get Phys(data[n=3+4000]=f701e000)
AtapiVirtToPhysAddr_: f701e000 -> 00000000:1b936000
  ph data[3]=0:1b936000 (fff)
  get Phys(data[n=4+1000]=f701f000)
AtapiVirtToPhysAddr_: f701f000 -> 00000000:1b937000
  ph data[3]=0:1b936000 (1fff)
  get Phys(data[n=4+2000]=f7020000)
AtapiVirtToPhysAddr_: f7020000 -> 00000000:1b938000
  ph data[3]=0:1b936000 (2fff)
  get Phys(data[n=4+3000]=f7021000)
AtapiVirtToPhysAddr_: f7021000 -> 00000000:1b939000
  set TERM
  ph data[3]=0:1b936000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6780180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f10448, CDB 0xb5f10478, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c91e0
** Ide: Command AtaReq 0xb677b078
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffa3a0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 38ffa3a0, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7022000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7022000)
AtapiVirtToPhysAddr_: f7022000 -> 00000000:1b942000
  set TERM
  ph data[0]=0:1b942000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b5f10448
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffa2a0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x4, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb5f0f138
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb67800f0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffa320, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0
  AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180)
  prd_length 0x4, flags 0x5, base 8e43180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f0f138, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f0f138
AtapiInterrupt: NextRequest, srb=0xb5f10448
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f10448, CDB 0xb5f10478, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffa3a0, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f10448
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f10448, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f10448
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5f0f138
TopLevel (3), AtaReq 0xb67800f0
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c9230
** Ide: Command AtaReq 0xb67800f0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffab00, OrigWordsRequested 0x8200, DevSize 0x82
IdeReadWrite (REQ): Starting sector is 38ffab00, Number of WORDS 0x8200, DevSize 0x82
  AtaReq 0xb67800f0: cmd aligned b6780180, d=30
  ahci_cmd_ptr 0xb6780180
AtapiDmaSetup: mode 0x0, data f6fa6000, count 10400, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6780180)
AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180
  get Phys(data[0]=f6fa6000)
AtapiVirtToPhysAddr_: f6fa6000 -> 00000000:1ad3a000
  ph data[0]=0:1ad3a000 (fff)
  get Phys(data[n=1+1000]=f6fa7000)
AtapiVirtToPhysAddr_: f6fa7000 -> 00000000:1ad3b000
  ph data[0]=0:1ad3a000 (1fff)
  get Phys(data[n=1+2000]=f6fa8000)
AtapiVirtToPhysAddr_: f6fa8000 -> 00000000:1ad3c000
  ph data[0]=0:1ad3a000 (2fff)
  get Phys(data[n=1+3000]=f6fa9000)
AtapiVirtToPhysAddr_: f6fa9000 -> 00000000:1ad3d000
  ph data[0]=0:1ad3a000 (3fff)
  get Phys(data[n=1+4000]=f6faa000)
AtapiVirtToPhysAddr_: f6faa000 -> 00000000:1ad3e000
  ph data[0]=0:1ad3a000 (4fff)
  get Phys(data[n=1+5000]=f6fab000)
AtapiVirtToPhysAddr_: f6fab000 -> 00000000:1ad3f000
  ph data[0]=0:1ad3a000 (5fff)
  get Phys(data[n=1+6000]=f6fac000)
AtapiVirtToPhysAddr_: f6fac000 -> 00000000:1ad40000
  ph data[0]=0:1ad3a000 (6fff)
  get Phys(data[n=1+7000]=f6fad000)
AtapiVirtToPhysAddr_: f6fad000 -> 00000000:1ad41000
  ph data[0]=0:1ad3a000 (7fff)
  get Phys(data[n=1+8000]=f6fae000)
AtapiVirtToPhysAddr_: f6fae000 -> 00000000:1ad42000
  ph data[0]=0:1ad3a000 (8fff)
  get Phys(data[n=1+9000]=f6faf000)
AtapiVirtToPhysAddr_: f6faf000 -> 00000000:1ad43000
  ph data[0]=0:1ad3a000 (9fff)
  get Phys(data[n=1+a000]=f6fb0000)
AtapiVirtToPhysAddr_: f6fb0000 -> 00000000:1ad44000
  ph data[0]=0:1ad3a000 (afff)
  get Phys(data[n=1+b000]=f6fb1000)
AtapiVirtToPhysAddr_: f6fb1000 -> 00000000:1ad45000
  ph data[0]=0:1ad3a000 (bfff)
  get Phys(data[n=1+c000]=f6fb2000)
AtapiVirtToPhysAddr_: f6fb2000 -> 00000000:1ad46000
  ph data[0]=0:1ad3a000 (cfff)
  get Phys(data[n=1+d000]=f6fb3000)
AtapiVirtToPhysAddr_: f6fb3000 -> 00000000:1ad47000
  ph data[0]=0:1ad3a000 (dfff)
  get Phys(data[n=1+e000]=f6fb4000)
AtapiVirtToPhysAddr_: f6fb4000 -> 00000000:1ad48000
  ph data[0]=0:1ad3a000 (efff)
  get Phys(data[n=1+f000]=f6fb5000)
AtapiVirtToPhysAddr_: f6fb5000 -> 00000000:1ad49000
  ph data[0]=0:1ad3a000 (ffff)
  get Phys(data[n=1+10000]=f6fb6000)
AtapiVirtToPhysAddr_: f6fb6000 -> 00000000:1ad4a000
  set TERM
  ph data[0]=0:1ad3a000 (103ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6780180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffab00, Count 0x82(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0
  AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180)
  prd_length 0x1, flags 0x5, base 8e43180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8200, WordsLeft 8200
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10400, full size 10400
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f0f138, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f0f138
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5f0f138
TopLevel (3), AtaReq 0xb67800f0
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c9230
** Ide: Command AtaReq 0xb67800f0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffac20, OrigWordsRequested 0x8200, DevSize 0x82
IdeReadWrite (REQ): Starting sector is 38ffac20, Number of WORDS 0x8200, DevSize 0x82
  AtaReq 0xb67800f0: cmd aligned b6780180, d=30
  ahci_cmd_ptr 0xb6780180
AtapiDmaSetup: mode 0x0, data f6fa6000, count 10400, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6780180)
AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180
  get Phys(data[0]=f6fa6000)
AtapiVirtToPhysAddr_: f6fa6000 -> 00000000:195cb000
  ph data[0]=0:195cb000 (fff)
  get Phys(data[n=1+1000]=f6fa7000)
AtapiVirtToPhysAddr_: f6fa7000 -> 00000000:195c4000
  ph data[1]=0:195c4000 (fff)
  get Phys(data[n=2+1000]=f6fa8000)
AtapiVirtToPhysAddr_: f6fa8000 -> 00000000:195c5000
  ph data[1]=0:195c4000 (1fff)
  get Phys(data[n=2+2000]=f6fa9000)
AtapiVirtToPhysAddr_: f6fa9000 -> 00000000:195c6000
  ph data[1]=0:195c4000 (2fff)
  get Phys(data[n=2+3000]=f6faa000)
AtapiVirtToPhysAddr_: f6faa000 -> 00000000:195c7000
  ph data[1]=0:195c4000 (3fff)
  get Phys(data[n=2+4000]=f6fab000)
AtapiVirtToPhysAddr_: f6fab000 -> 00000000:195c8000
  ph data[1]=0:195c4000 (4fff)
  get Phys(data[n=2+5000]=f6fac000)
AtapiVirtToPhysAddr_: f6fac000 -> 00000000:195c9000
  ph data[1]=0:195c4000 (5fff)
  get Phys(data[n=2+6000]=f6fad000)
AtapiVirtToPhysAddr_: f6fad000 -> 00000000:195d2000
  ph data[2]=0:195d2000 (fff)
  get Phys(data[n=3+1000]=f6fae000)
AtapiVirtToPhysAddr_: f6fae000 -> 00000000:195d3000
  ph data[2]=0:195d2000 (1fff)
  get Phys(data[n=3+2000]=f6faf000)
AtapiVirtToPhysAddr_: f6faf000 -> 00000000:195cc000
  ph data[3]=0:195cc000 (fff)
  get Phys(data[n=4+1000]=f6fb0000)
AtapiVirtToPhysAddr_: f6fb0000 -> 00000000:195cd000
  ph data[3]=0:195cc000 (1fff)
  get Phys(data[n=4+2000]=f6fb1000)
AtapiVirtToPhysAddr_: f6fb1000 -> 00000000:195ce000
  ph data[3]=0:195cc000 (2fff)
  get Phys(data[n=4+3000]=f6fb2000)
AtapiVirtToPhysAddr_: f6fb2000 -> 00000000:195cf000
  ph data[3]=0:195cc000 (3fff)
  get Phys(data[n=4+4000]=f6fb3000)
AtapiVirtToPhysAddr_: f6fb3000 -> 00000000:195d0000
  ph data[3]=0:195cc000 (4fff)
  get Phys(data[n=4+5000]=f6fb4000)
AtapiVirtToPhysAddr_: f6fb4000 -> 00000000:195d1000
  ph data[3]=0:195cc000 (5fff)
  get Phys(data[n=4+6000]=f6fb5000)
AtapiVirtToPhysAddr_: f6fb5000 -> 00000000:195da000
  ph data[4]=0:195da000 (fff)
  get Phys(data[n=5+1000]=f6fb6000)
AtapiVirtToPhysAddr_: f6fb6000 -> 00000000:195db000
  set TERM
  ph data[4]=0:195da000 (13ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6780180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffac20, Count 0x82(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0
  AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180)
  prd_length 0x5, flags 0x5, base 8e43180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8200, WordsLeft 8200
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10400, full size 10400
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f0f138, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f0f138
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5f0f138
TopLevel (3), AtaReq 0xb67800f0
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c9230
** Ide: Command AtaReq 0xb67800f0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffad40, OrigWordsRequested 0x8200, DevSize 0x82
IdeReadWrite (REQ): Starting sector is 38ffad40, Number of WORDS 0x8200, DevSize 0x82
  AtaReq 0xb67800f0: cmd aligned b6780180, d=30
  ahci_cmd_ptr 0xb6780180
AtapiDmaSetup: mode 0x0, data f6fa6000, count 10400, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6780180)
AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180
  get Phys(data[0]=f6fa6000)
AtapiVirtToPhysAddr_: f6fa6000 -> 00000000:194a3000
  ph data[0]=0:194a3000 (fff)
  get Phys(data[n=1+1000]=f6fa7000)
AtapiVirtToPhysAddr_: f6fa7000 -> 00000000:194a4000
  ph data[0]=0:194a3000 (1fff)
  get Phys(data[n=1+2000]=f6fa8000)
AtapiVirtToPhysAddr_: f6fa8000 -> 00000000:194a5000
  ph data[0]=0:194a3000 (2fff)
  get Phys(data[n=1+3000]=f6fa9000)
AtapiVirtToPhysAddr_: f6fa9000 -> 00000000:194a6000
  ph data[0]=0:194a3000 (3fff)
  get Phys(data[n=1+4000]=f6faa000)
AtapiVirtToPhysAddr_: f6faa000 -> 00000000:194a7000
  ph data[0]=0:194a3000 (4fff)
  get Phys(data[n=1+5000]=f6fab000)
AtapiVirtToPhysAddr_: f6fab000 -> 00000000:194a0000
  ph data[1]=0:194a0000 (fff)
  get Phys(data[n=2+1000]=f6fac000)
AtapiVirtToPhysAddr_: f6fac000 -> 00000000:194a1000
  ph data[1]=0:194a0000 (1fff)
  get Phys(data[n=2+2000]=f6fad000)
AtapiVirtToPhysAddr_: f6fad000 -> 00000000:194a2000
  ph data[1]=0:194a0000 (2fff)
  get Phys(data[n=2+3000]=f6fae000)
AtapiVirtToPhysAddr_: f6fae000 -> 00000000:194ab000
  ph data[2]=0:194ab000 (fff)
  get Phys(data[n=3+1000]=f6faf000)
AtapiVirtToPhysAddr_: f6faf000 -> 00000000:194ac000
  ph data[2]=0:194ab000 (1fff)
  get Phys(data[n=3+2000]=f6fb0000)
AtapiVirtToPhysAddr_: f6fb0000 -> 00000000:194ad000
  ph data[2]=0:194ab000 (2fff)
  get Phys(data[n=3+3000]=f6fb1000)
AtapiVirtToPhysAddr_: f6fb1000 -> 00000000:194ae000
  ph data[2]=0:194ab000 (3fff)
  get Phys(data[n=3+4000]=f6fb2000)
AtapiVirtToPhysAddr_: f6fb2000 -> 00000000:194af000
  ph data[2]=0:194ab000 (4fff)
  get Phys(data[n=3+5000]=f6fb3000)
AtapiVirtToPhysAddr_: f6fb3000 -> 00000000:194a8000
  ph data[3]=0:194a8000 (fff)
  get Phys(data[n=4+1000]=f6fb4000)
AtapiVirtToPhysAddr_: f6fb4000 -> 00000000:194a9000
  ph data[3]=0:194a8000 (1fff)
  get Phys(data[n=4+2000]=f6fb5000)
AtapiVirtToPhysAddr_: f6fb5000 -> 00000000:194aa000
  ph data[3]=0:194a8000 (2fff)
  get Phys(data[n=4+3000]=f6fb6000)
AtapiVirtToPhysAddr_: f6fb6000 -> 00000000:194b3000
  set TERM
  ph data[4]=0:194b3000 (3ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6780180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffad40, Count 0x82(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0
  AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180)
  prd_length 0x5, flags 0x5, base 8e43180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8200, WordsLeft 8200
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10400, full size 10400
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f0f138, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f0f138
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5f0f138
TopLevel (3), AtaReq 0xb67800f0
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c91e0
** Ide: Command AtaReq 0xb67800f0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ff9dc0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ff9dc0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb67800f0: cmd aligned b6780180, d=30
  ahci_cmd_ptr 0xb6780180
AtapiDmaSetup: mode 0x0, data f6ffc000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6780180)
AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180
  get Phys(data[0]=f6ffc000)
AtapiVirtToPhysAddr_: f6ffc000 -> 00000000:191b3000
  ph data[0]=0:191b3000 (fff)
  get Phys(data[n=1+1000]=f6ffd000)
AtapiVirtToPhysAddr_: f6ffd000 -> 00000000:191ac000
  ph data[1]=0:191ac000 (fff)
  get Phys(data[n=2+1000]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:191ad000
  ph data[1]=0:191ac000 (1fff)
  get Phys(data[n=2+2000]=f6fff000)
AtapiVirtToPhysAddr_: f6fff000 -> 00000000:191ae000
  ph data[1]=0:191ac000 (2fff)
  get Phys(data[n=2+3000]=f7000000)
AtapiVirtToPhysAddr_: f7000000 -> 00000000:191af000
  ph data[1]=0:191ac000 (3fff)
  get Phys(data[n=2+4000]=f7001000)
AtapiVirtToPhysAddr_: f7001000 -> 00000000:191b0000
  ph data[1]=0:191ac000 (4fff)
  get Phys(data[n=2+5000]=f7002000)
AtapiVirtToPhysAddr_: f7002000 -> 00000000:191b1000
  ph data[1]=0:191ac000 (5fff)
  get Phys(data[n=2+6000]=f7003000)
AtapiVirtToPhysAddr_: f7003000 -> 00000000:191b2000
  ph data[1]=0:191ac000 (6fff)
  get Phys(data[n=2+7000]=f7004000)
AtapiVirtToPhysAddr_: f7004000 -> 00000000:191bb000
  ph data[2]=0:191bb000 (fff)
  get Phys(data[n=3+1000]=f7005000)
AtapiVirtToPhysAddr_: f7005000 -> 00000000:191b4000
  ph data[3]=0:191b4000 (fff)
  get Phys(data[n=4+1000]=f7006000)
AtapiVirtToPhysAddr_: f7006000 -> 00000000:191b5000
  ph data[3]=0:191b4000 (1fff)
  get Phys(data[n=4+2000]=f7007000)
AtapiVirtToPhysAddr_: f7007000 -> 00000000:191b6000
  ph data[3]=0:191b4000 (2fff)
  get Phys(data[n=4+3000]=f7008000)
AtapiVirtToPhysAddr_: f7008000 -> 00000000:191b7000
  ph data[3]=0:191b4000 (3fff)
  get Phys(data[n=4+4000]=f7009000)
AtapiVirtToPhysAddr_: f7009000 -> 00000000:191b8000
  ph data[3]=0:191b4000 (4fff)
  get Phys(data[n=4+5000]=f700a000)
AtapiVirtToPhysAddr_: f700a000 -> 00000000:191b9000
  ph data[3]=0:191b4000 (5fff)
  get Phys(data[n=4+6000]=f700b000)
AtapiVirtToPhysAddr_: f700b000 -> 00000000:191ba000
  set TERM
  ph data[3]=0:191b4000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6780180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ff9dc0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0
  AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180)
  prd_length 0x4, flags 0x5, base 8e43180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f10448, CDB 0xb5f10478, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c91e0
** Ide: Command AtaReq 0xb677b078
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ff9e40, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ff9e40, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f700c000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f700c000)
AtapiVirtToPhysAddr_: f700c000 -> 00000000:191c3000
  ph data[0]=0:191c3000 (fff)
  get Phys(data[n=1+1000]=f700d000)
AtapiVirtToPhysAddr_: f700d000 -> 00000000:191bc000
  ph data[1]=0:191bc000 (fff)
  get Phys(data[n=2+1000]=f700e000)
AtapiVirtToPhysAddr_: f700e000 -> 00000000:191bd000
  ph data[1]=0:191bc000 (1fff)
  get Phys(data[n=2+2000]=f700f000)
AtapiVirtToPhysAddr_: f700f000 -> 00000000:191be000
  ph data[1]=0:191bc000 (2fff)
  get Phys(data[n=2+3000]=f7010000)
AtapiVirtToPhysAddr_: f7010000 -> 00000000:191bf000
  ph data[1]=0:191bc000 (3fff)
  get Phys(data[n=2+4000]=f7011000)
AtapiVirtToPhysAddr_: f7011000 -> 00000000:191c0000
  ph data[1]=0:191bc000 (4fff)
  get Phys(data[n=2+5000]=f7012000)
AtapiVirtToPhysAddr_: f7012000 -> 00000000:191c1000
  ph data[1]=0:191bc000 (5fff)
  get Phys(data[n=2+6000]=f7013000)
AtapiVirtToPhysAddr_: f7013000 -> 00000000:191c2000
  ph data[1]=0:191bc000 (6fff)
  get Phys(data[n=2+7000]=f7014000)
AtapiVirtToPhysAddr_: f7014000 -> 00000000:191cb000
  ph data[2]=0:191cb000 (fff)
  get Phys(data[n=3+1000]=f7015000)
AtapiVirtToPhysAddr_: f7015000 -> 00000000:191c4000
  ph data[3]=0:191c4000 (fff)
  get Phys(data[n=4+1000]=f7016000)
AtapiVirtToPhysAddr_: f7016000 -> 00000000:191c5000
  ph data[3]=0:191c4000 (1fff)
  get Phys(data[n=4+2000]=f7017000)
AtapiVirtToPhysAddr_: f7017000 -> 00000000:191c6000
  ph data[3]=0:191c4000 (2fff)
  get Phys(data[n=4+3000]=f7018000)
AtapiVirtToPhysAddr_: f7018000 -> 00000000:191c7000
  ph data[3]=0:191c4000 (3fff)
  get Phys(data[n=4+4000]=f7019000)
AtapiVirtToPhysAddr_: f7019000 -> 00000000:191c8000
  ph data[3]=0:191c4000 (4fff)
  get Phys(data[n=4+5000]=f701a000)
AtapiVirtToPhysAddr_: f701a000 -> 00000000:191c9000
  ph data[3]=0:191c4000 (5fff)
  get Phys(data[n=4+6000]=f701b000)
AtapiVirtToPhysAddr_: f701b000 -> 00000000:191ca000
  set TERM
  ph data[3]=0:191c4000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5f10448
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c91e0
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ff9ec0, OrigWordsRequested 0x3f00, DevSize 0x3f
IdeReadWrite (REQ): Starting sector is 38ff9ec0, Number of WORDS 0x3f00, DevSize 0x3f
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f701c000, count 7e00, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f701c000)
AtapiVirtToPhysAddr_: f701c000 -> 00000000:191d3000
  ph data[0]=0:191d3000 (fff)
  get Phys(data[n=1+1000]=f701d000)
AtapiVirtToPhysAddr_: f701d000 -> 00000000:191cc000
  ph data[1]=0:191cc000 (fff)
  get Phys(data[n=2+1000]=f701e000)
AtapiVirtToPhysAddr_: f701e000 -> 00000000:191cd000
  ph data[1]=0:191cc000 (1fff)
  get Phys(data[n=2+2000]=f701f000)
AtapiVirtToPhysAddr_: f701f000 -> 00000000:191ce000
  ph data[1]=0:191cc000 (2fff)
  get Phys(data[n=2+3000]=f7020000)
AtapiVirtToPhysAddr_: f7020000 -> 00000000:191cf000
  ph data[1]=0:191cc000 (3fff)
  get Phys(data[n=2+4000]=f7021000)
AtapiVirtToPhysAddr_: f7021000 -> 00000000:191d0000
  ph data[1]=0:191cc000 (4fff)
  get Phys(data[n=2+5000]=f7022000)
AtapiVirtToPhysAddr_: f7022000 -> 00000000:191d1000
  ph data[1]=0:191cc000 (5fff)
  get Phys(data[n=2+6000]=f7023000)
AtapiVirtToPhysAddr_: f7023000 -> 00000000:191d2000
  set TERM
  ph data[1]=0:191cc000 (6dff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f0f138, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f0f138
AtapiInterrupt: NextRequest, srb=0xb5f10448
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f10448, CDB 0xb5f10478, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ff9e40, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x4, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f10448
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f10448, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f10448
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ff9ec0, Count 0x3f(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x2, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 3f00, WordsLeft 3f00
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 7e00, full size 7e00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb671e4a0
TopLevel (3), AtaReq 0xb6776000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c91e0
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffa090, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffa090, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f6ff2000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f6ff2000)
AtapiVirtToPhysAddr_: f6ff2000 -> 00000000:185fb000
  ph data[0]=0:185fb000 (fff)
  get Phys(data[n=1+1000]=f6ff3000)
AtapiVirtToPhysAddr_: f6ff3000 -> 00000000:185f4000
  ph data[1]=0:185f4000 (fff)
  get Phys(data[n=2+1000]=f6ff4000)
AtapiVirtToPhysAddr_: f6ff4000 -> 00000000:185f5000
  ph data[1]=0:185f4000 (1fff)
  get Phys(data[n=2+2000]=f6ff5000)
AtapiVirtToPhysAddr_: f6ff5000 -> 00000000:185f6000
  ph data[1]=0:185f4000 (2fff)
  get Phys(data[n=2+3000]=f6ff6000)
AtapiVirtToPhysAddr_: f6ff6000 -> 00000000:185f7000
  ph data[1]=0:185f4000 (3fff)
  get Phys(data[n=2+4000]=f6ff7000)
AtapiVirtToPhysAddr_: f6ff7000 -> 00000000:185f8000
  ph data[1]=0:185f4000 (4fff)
  get Phys(data[n=2+5000]=f6ff8000)
AtapiVirtToPhysAddr_: f6ff8000 -> 00000000:185f9000
  ph data[1]=0:185f4000 (5fff)
  get Phys(data[n=2+6000]=f6ff9000)
AtapiVirtToPhysAddr_: f6ff9000 -> 00000000:185fa000
  ph data[1]=0:185f4000 (6fff)
  get Phys(data[n=2+7000]=f6ffa000)
AtapiVirtToPhysAddr_: f6ffa000 -> 00000000:18603000
  ph data[2]=0:18603000 (fff)
  get Phys(data[n=3+1000]=f6ffb000)
AtapiVirtToPhysAddr_: f6ffb000 -> 00000000:185fc000
  ph data[3]=0:185fc000 (fff)
  get Phys(data[n=4+1000]=f6ffc000)
AtapiVirtToPhysAddr_: f6ffc000 -> 00000000:185fd000
  ph data[3]=0:185fc000 (1fff)
  get Phys(data[n=4+2000]=f6ffd000)
AtapiVirtToPhysAddr_: f6ffd000 -> 00000000:185fe000
  ph data[3]=0:185fc000 (2fff)
  get Phys(data[n=4+3000]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:185ff000
  ph data[3]=0:185fc000 (3fff)
  get Phys(data[n=4+4000]=f6fff000)
AtapiVirtToPhysAddr_: f6fff000 -> 00000000:18600000
  ph data[3]=0:185fc000 (4fff)
  get Phys(data[n=4+5000]=f7000000)
AtapiVirtToPhysAddr_: f7000000 -> 00000000:18601000
  ph data[3]=0:185fc000 (5fff)
  get Phys(data[n=4+6000]=f7001000)
AtapiVirtToPhysAddr_: f7001000 -> 00000000:18602000
  set TERM
  ph data[3]=0:185fc000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffa090, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x4, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f10448, CDB 0xb5f10478, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c91e0
** Ide: Command AtaReq 0xb677b078
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffa110, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffa110, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7002000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7002000)
AtapiVirtToPhysAddr_: f7002000 -> 00000000:1860b000
  ph data[0]=0:1860b000 (fff)
  get Phys(data[n=1+1000]=f7003000)
AtapiVirtToPhysAddr_: f7003000 -> 00000000:18604000
  ph data[1]=0:18604000 (fff)
  get Phys(data[n=2+1000]=f7004000)
AtapiVirtToPhysAddr_: f7004000 -> 00000000:18605000
  ph data[1]=0:18604000 (1fff)
  get Phys(data[n=2+2000]=f7005000)
AtapiVirtToPhysAddr_: f7005000 -> 00000000:18606000
  ph data[1]=0:18604000 (2fff)
  get Phys(data[n=2+3000]=f7006000)
AtapiVirtToPhysAddr_: f7006000 -> 00000000:18607000
  ph data[1]=0:18604000 (3fff)
  get Phys(data[n=2+4000]=f7007000)
AtapiVirtToPhysAddr_: f7007000 -> 00000000:18608000
  ph data[1]=0:18604000 (4fff)
  get Phys(data[n=2+5000]=f7008000)
AtapiVirtToPhysAddr_: f7008000 -> 00000000:18609000
  ph data[1]=0:18604000 (5fff)
  get Phys(data[n=2+6000]=f7009000)
AtapiVirtToPhysAddr_: f7009000 -> 00000000:1860a000
  ph data[1]=0:18604000 (6fff)
  get Phys(data[n=2+7000]=f700a000)
AtapiVirtToPhysAddr_: f700a000 -> 00000000:18613000
  ph data[2]=0:18613000 (fff)
  get Phys(data[n=3+1000]=f700b000)
AtapiVirtToPhysAddr_: f700b000 -> 00000000:1860c000
  ph data[3]=0:1860c000 (fff)
  get Phys(data[n=4+1000]=f700c000)
AtapiVirtToPhysAddr_: f700c000 -> 00000000:1860d000
  ph data[3]=0:1860c000 (1fff)
  get Phys(data[n=4+2000]=f700d000)
AtapiVirtToPhysAddr_: f700d000 -> 00000000:1860e000
  ph data[3]=0:1860c000 (2fff)
  get Phys(data[n=4+3000]=f700e000)
AtapiVirtToPhysAddr_: f700e000 -> 00000000:1860f000
  ph data[3]=0:1860c000 (3fff)
  get Phys(data[n=4+4000]=f700f000)
AtapiVirtToPhysAddr_: f700f000 -> 00000000:18610000
  ph data[3]=0:1860c000 (4fff)
  get Phys(data[n=4+5000]=f7010000)
AtapiVirtToPhysAddr_: f7010000 -> 00000000:18611000
  ph data[3]=0:1860c000 (5fff)
  get Phys(data[n=4+6000]=f7011000)
AtapiVirtToPhysAddr_: f7011000 -> 00000000:18612000
  set TERM
  ph data[3]=0:1860c000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5f10448
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c91e0
** Ide: Command AtaReq 0xb67800f0
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffa190, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffa190, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb67800f0: cmd aligned b6780180, d=30
  ahci_cmd_ptr 0xb6780180
AtapiDmaSetup: mode 0x0, data f7012000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6780180)
AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180
  get Phys(data[0]=f7012000)
AtapiVirtToPhysAddr_: f7012000 -> 00000000:1861b000
  ph data[0]=0:1861b000 (fff)
  get Phys(data[n=1+1000]=f7013000)
AtapiVirtToPhysAddr_: f7013000 -> 00000000:18614000
  ph data[1]=0:18614000 (fff)
  get Phys(data[n=2+1000]=f7014000)
AtapiVirtToPhysAddr_: f7014000 -> 00000000:18615000
  ph data[1]=0:18614000 (1fff)
  get Phys(data[n=2+2000]=f7015000)
AtapiVirtToPhysAddr_: f7015000 -> 00000000:18616000
  ph data[1]=0:18614000 (2fff)
  get Phys(data[n=2+3000]=f7016000)
AtapiVirtToPhysAddr_: f7016000 -> 00000000:18617000
  ph data[1]=0:18614000 (3fff)
  get Phys(data[n=2+4000]=f7017000)
AtapiVirtToPhysAddr_: f7017000 -> 00000000:18618000
  ph data[1]=0:18614000 (4fff)
  get Phys(data[n=2+5000]=f7018000)
AtapiVirtToPhysAddr_: f7018000 -> 00000000:18619000
  ph data[1]=0:18614000 (5fff)
  get Phys(data[n=2+6000]=f7019000)
AtapiVirtToPhysAddr_: f7019000 -> 00000000:1861a000
  ph data[1]=0:18614000 (6fff)
  get Phys(data[n=2+7000]=f701a000)
AtapiVirtToPhysAddr_: f701a000 -> 00000000:18623000
  ph data[2]=0:18623000 (fff)
  get Phys(data[n=3+1000]=f701b000)
AtapiVirtToPhysAddr_: f701b000 -> 00000000:1861c000
  ph data[3]=0:1861c000 (fff)
  get Phys(data[n=4+1000]=f701c000)
AtapiVirtToPhysAddr_: f701c000 -> 00000000:1861d000
  ph data[3]=0:1861c000 (1fff)
  get Phys(data[n=4+2000]=f701d000)
AtapiVirtToPhysAddr_: f701d000 -> 00000000:1861e000
  ph data[3]=0:1861c000 (2fff)
  get Phys(data[n=4+3000]=f701e000)
AtapiVirtToPhysAddr_: f701e000 -> 00000000:1861f000
  ph data[3]=0:1861c000 (3fff)
  get Phys(data[n=4+4000]=f701f000)
AtapiVirtToPhysAddr_: f701f000 -> 00000000:18620000
  ph data[3]=0:1861c000 (4fff)
  get Phys(data[n=4+5000]=f7020000)
AtapiVirtToPhysAddr_: f7020000 -> 00000000:18621000
  ph data[3]=0:1861c000 (5fff)
  get Phys(data[n=4+6000]=f7021000)
AtapiVirtToPhysAddr_: f7021000 -> 00000000:18622000
  set TERM
  ph data[3]=0:1861c000 (6fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6780180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677e0c0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c91e0
** Ide: Command AtaReq 0xb677e0c0
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffa210, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 38ffa210, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677e0c0: cmd aligned b677e180, d=60
  ahci_cmd_ptr 0xb677e180
AtapiDmaSetup: mode 0x0, data f7022000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677e180)
AtapiVirtToPhysAddr_: b677e180 -> 00000000:08e41180
  get Phys(data[0]=f7022000)
AtapiVirtToPhysAddr_: f7022000 -> 00000000:1862b000
  set TERM
  ph data[0]=0:1862b000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677e180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb5f10448
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f10448, CDB 0xb5f10478, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffa110, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x4, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f10448
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f10448, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f10448
AtapiInterrupt: NextRequest, srb=0xb5f0f138
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb67800f0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffa190, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0
  AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180)
  prd_length 0x4, flags 0x5, base 8e43180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f0f138, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f0f138
AtapiInterrupt: NextRequest, srb=0xb6346750
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677e0c0, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677e0c0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffa210, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677e0c0
  AHCI AtaReq CMD 0xb677e180 (ph 0x8e41180)
  prd_length 0x1, flags 0x5, base 8e41180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5f0f138
TopLevel (3), AtaReq 0xb67800f0
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c9230
** Ide: Command AtaReq 0xb67800f0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ff9c10, OrigWordsRequested 0x8300, DevSize 0x83
IdeReadWrite (REQ): Starting sector is 38ff9c10, Number of WORDS 0x8300, DevSize 0x83
  AtaReq 0xb67800f0: cmd aligned b6780180, d=30
  ahci_cmd_ptr 0xb6780180
AtapiDmaSetup: mode 0x0, data f6fa6000, count 10600, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6780180)
AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180
  get Phys(data[0]=f6fa6000)
AtapiVirtToPhysAddr_: f6fa6000 -> 00000000:17ecc000
  ph data[0]=0:17ecc000 (fff)
  get Phys(data[n=1+1000]=f6fa7000)
AtapiVirtToPhysAddr_: f6fa7000 -> 00000000:17ecd000
  ph data[0]=0:17ecc000 (1fff)
  get Phys(data[n=1+2000]=f6fa8000)
AtapiVirtToPhysAddr_: f6fa8000 -> 00000000:17ece000
  ph data[0]=0:17ecc000 (2fff)
  get Phys(data[n=1+3000]=f6fa9000)
AtapiVirtToPhysAddr_: f6fa9000 -> 00000000:17ecf000
  ph data[0]=0:17ecc000 (3fff)
  get Phys(data[n=1+4000]=f6faa000)
AtapiVirtToPhysAddr_: f6faa000 -> 00000000:17ed0000
  ph data[0]=0:17ecc000 (4fff)
  get Phys(data[n=1+5000]=f6fab000)
AtapiVirtToPhysAddr_: f6fab000 -> 00000000:17ed1000
  ph data[0]=0:17ecc000 (5fff)
  get Phys(data[n=1+6000]=f6fac000)
AtapiVirtToPhysAddr_: f6fac000 -> 00000000:17eca000
  ph data[1]=0:17eca000 (fff)
  get Phys(data[n=2+1000]=f6fad000)
AtapiVirtToPhysAddr_: f6fad000 -> 00000000:17ed3000
  ph data[2]=0:17ed3000 (fff)
  get Phys(data[n=3+1000]=f6fae000)
AtapiVirtToPhysAddr_: f6fae000 -> 00000000:17ed4000
  ph data[2]=0:17ed3000 (1fff)
  get Phys(data[n=3+2000]=f6faf000)
AtapiVirtToPhysAddr_: f6faf000 -> 00000000:17ed5000
  ph data[2]=0:17ed3000 (2fff)
  get Phys(data[n=3+3000]=f6fb0000)
AtapiVirtToPhysAddr_: f6fb0000 -> 00000000:17ed6000
  ph data[2]=0:17ed3000 (3fff)
  get Phys(data[n=3+4000]=f6fb1000)
AtapiVirtToPhysAddr_: f6fb1000 -> 00000000:17ed7000
  ph data[2]=0:17ed3000 (4fff)
  get Phys(data[n=3+5000]=f6fb2000)
AtapiVirtToPhysAddr_: f6fb2000 -> 00000000:17ed8000
  ph data[2]=0:17ed3000 (5fff)
  get Phys(data[n=3+6000]=f6fb3000)
AtapiVirtToPhysAddr_: f6fb3000 -> 00000000:17ed9000
  ph data[2]=0:17ed3000 (6fff)
  get Phys(data[n=3+7000]=f6fb4000)
AtapiVirtToPhysAddr_: f6fb4000 -> 00000000:17ed2000
  ph data[3]=0:17ed2000 (fff)
  get Phys(data[n=4+1000]=f6fb5000)
AtapiVirtToPhysAddr_: f6fb5000 -> 00000000:17edb000
  ph data[4]=0:17edb000 (fff)
  get Phys(data[n=5+1000]=f6fb6000)
AtapiVirtToPhysAddr_: f6fb6000 -> 00000000:17edc000
  set TERM
  ph data[4]=0:17edb000 (15ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6780180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ff9c10, Count 0x83(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0
  AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180)
  prd_length 0x5, flags 0x5, base 8e43180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8300, WordsLeft 8300
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10600, full size 10600
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f0f138, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f0f138
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5f0f138
TopLevel (3), AtaReq 0xb67800f0
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c9230
** Ide: Command AtaReq 0xb67800f0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffacb0, OrigWordsRequested 0x8200, DevSize 0x82
IdeReadWrite (REQ): Starting sector is 38ffacb0, Number of WORDS 0x8200, DevSize 0x82
  AtaReq 0xb67800f0: cmd aligned b6780180, d=30
  ahci_cmd_ptr 0xb6780180
AtapiDmaSetup: mode 0x0, data f6fa6000, count 10400, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6780180)
AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180
  get Phys(data[0]=f6fa6000)
AtapiVirtToPhysAddr_: f6fa6000 -> 00000000:17464000
  ph data[0]=0:17464000 (fff)
  get Phys(data[n=1+1000]=f6fa7000)
AtapiVirtToPhysAddr_: f6fa7000 -> 00000000:17465000
  ph data[0]=0:17464000 (1fff)
  get Phys(data[n=1+2000]=f6fa8000)
AtapiVirtToPhysAddr_: f6fa8000 -> 00000000:1745e000
  ph data[1]=0:1745e000 (fff)
  get Phys(data[n=2+1000]=f6fa9000)
AtapiVirtToPhysAddr_: f6fa9000 -> 00000000:1745f000
  ph data[1]=0:1745e000 (1fff)
  get Phys(data[n=2+2000]=f6faa000)
AtapiVirtToPhysAddr_: f6faa000 -> 00000000:17460000
  ph data[1]=0:1745e000 (2fff)
  get Phys(data[n=2+3000]=f6fab000)
AtapiVirtToPhysAddr_: f6fab000 -> 00000000:17461000
  ph data[1]=0:1745e000 (3fff)
  get Phys(data[n=2+4000]=f6fac000)
AtapiVirtToPhysAddr_: f6fac000 -> 00000000:17462000
  ph data[1]=0:1745e000 (4fff)
  get Phys(data[n=2+5000]=f6fad000)
AtapiVirtToPhysAddr_: f6fad000 -> 00000000:17463000
  ph data[1]=0:1745e000 (5fff)
  get Phys(data[n=2+6000]=f6fae000)
AtapiVirtToPhysAddr_: f6fae000 -> 00000000:1746c000
  ph data[2]=0:1746c000 (fff)
  get Phys(data[n=3+1000]=f6faf000)
AtapiVirtToPhysAddr_: f6faf000 -> 00000000:1746d000
  ph data[2]=0:1746c000 (1fff)
  get Phys(data[n=3+2000]=f6fb0000)
AtapiVirtToPhysAddr_: f6fb0000 -> 00000000:17466000
  ph data[3]=0:17466000 (fff)
  get Phys(data[n=4+1000]=f6fb1000)
AtapiVirtToPhysAddr_: f6fb1000 -> 00000000:17467000
  ph data[3]=0:17466000 (1fff)
  get Phys(data[n=4+2000]=f6fb2000)
AtapiVirtToPhysAddr_: f6fb2000 -> 00000000:17468000
  ph data[3]=0:17466000 (2fff)
  get Phys(data[n=4+3000]=f6fb3000)
AtapiVirtToPhysAddr_: f6fb3000 -> 00000000:17469000
  ph data[3]=0:17466000 (3fff)
  get Phys(data[n=4+4000]=f6fb4000)
AtapiVirtToPhysAddr_: f6fb4000 -> 00000000:1746a000
  ph data[3]=0:17466000 (4fff)
  get Phys(data[n=4+5000]=f6fb5000)
AtapiVirtToPhysAddr_: f6fb5000 -> 00000000:1746b000
  ph data[3]=0:17466000 (5fff)
  get Phys(data[n=4+6000]=f6fb6000)
AtapiVirtToPhysAddr_: f6fb6000 -> 00000000:17474000
  set TERM
  ph data[4]=0:17474000 (3ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6780180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffacb0, Count 0x82(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0
  AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180)
  prd_length 0x5, flags 0x5, base 8e43180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8200, WordsLeft 8200
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10400, full size 10400
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f0f138, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f0f138
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5f0f138
TopLevel (3), AtaReq 0xb67800f0
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c9230
** Ide: Command AtaReq 0xb67800f0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffae60, OrigWordsRequested 0x8200, DevSize 0x82
IdeReadWrite (REQ): Starting sector is 38ffae60, Number of WORDS 0x8200, DevSize 0x82
  AtaReq 0xb67800f0: cmd aligned b6780180, d=30
  ahci_cmd_ptr 0xb6780180
AtapiDmaSetup: mode 0x0, data f6fa6000, count 10400, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6780180)
AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180
  get Phys(data[0]=f6fa6000)
AtapiVirtToPhysAddr_: f6fa6000 -> 00000000:17415000
  ph data[0]=0:17415000 (fff)
  get Phys(data[n=1+1000]=f6fa7000)
AtapiVirtToPhysAddr_: f6fa7000 -> 00000000:17416000
  ph data[0]=0:17415000 (1fff)
  get Phys(data[n=1+2000]=f6fa8000)
AtapiVirtToPhysAddr_: f6fa8000 -> 00000000:17417000
  ph data[0]=0:17415000 (2fff)
  get Phys(data[n=1+3000]=f6fa9000)
AtapiVirtToPhysAddr_: f6fa9000 -> 00000000:17410000
  ph data[1]=0:17410000 (fff)
  get Phys(data[n=2+1000]=f6faa000)
AtapiVirtToPhysAddr_: f6faa000 -> 00000000:17411000
  ph data[1]=0:17410000 (1fff)
  get Phys(data[n=2+2000]=f6fab000)
AtapiVirtToPhysAddr_: f6fab000 -> 00000000:17412000
  ph data[1]=0:17410000 (2fff)
  get Phys(data[n=2+3000]=f6fac000)
AtapiVirtToPhysAddr_: f6fac000 -> 00000000:17413000
  ph data[1]=0:17410000 (3fff)
  get Phys(data[n=2+4000]=f6fad000)
AtapiVirtToPhysAddr_: f6fad000 -> 00000000:1741c000
  ph data[2]=0:1741c000 (fff)
  get Phys(data[n=3+1000]=f6fae000)
AtapiVirtToPhysAddr_: f6fae000 -> 00000000:1741d000
  ph data[2]=0:1741c000 (1fff)
  get Phys(data[n=3+2000]=f6faf000)
AtapiVirtToPhysAddr_: f6faf000 -> 00000000:1741e000
  ph data[2]=0:1741c000 (2fff)
  get Phys(data[n=3+3000]=f6fb0000)
AtapiVirtToPhysAddr_: f6fb0000 -> 00000000:1741f000
  ph data[2]=0:1741c000 (3fff)
  get Phys(data[n=3+4000]=f6fb1000)
AtapiVirtToPhysAddr_: f6fb1000 -> 00000000:17418000
  ph data[3]=0:17418000 (fff)
  get Phys(data[n=4+1000]=f6fb2000)
AtapiVirtToPhysAddr_: f6fb2000 -> 00000000:17419000
  ph data[3]=0:17418000 (1fff)
  get Phys(data[n=4+2000]=f6fb3000)
AtapiVirtToPhysAddr_: f6fb3000 -> 00000000:1741a000
  ph data[3]=0:17418000 (2fff)
  get Phys(data[n=4+3000]=f6fb4000)
AtapiVirtToPhysAddr_: f6fb4000 -> 00000000:1741b000
  ph data[3]=0:17418000 (3fff)
  get Phys(data[n=4+4000]=f6fb5000)
AtapiVirtToPhysAddr_: f6fb5000 -> 00000000:17424000
  ph data[4]=0:17424000 (fff)
  get Phys(data[n=5+1000]=f6fb6000)
AtapiVirtToPhysAddr_: f6fb6000 -> 00000000:17425000
  set TERM
  ph data[4]=0:17424000 (13ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6780180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffae60, Count 0x82(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0
  AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180)
  prd_length 0x5, flags 0x5, base 8e43180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8200, WordsLeft 8200
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10400, full size 10400
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f0f138, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f0f138
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5f0f138
TopLevel (3), AtaReq 0xb67800f0
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c9230
** Ide: Command AtaReq 0xb67800f0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffaef0, OrigWordsRequested 0x8200, DevSize 0x82
IdeReadWrite (REQ): Starting sector is 38ffaef0, Number of WORDS 0x8200, DevSize 0x82
  AtaReq 0xb67800f0: cmd aligned b6780180, d=30
  ahci_cmd_ptr 0xb6780180
AtapiDmaSetup: mode 0x0, data f6fa6000, count 10400, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6780180)
AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180
  get Phys(data[0]=f6fa6000)
AtapiVirtToPhysAddr_: f6fa6000 -> 00000000:173d5000
  ph data[0]=0:173d5000 (fff)
  get Phys(data[n=1+1000]=f6fa7000)
AtapiVirtToPhysAddr_: f6fa7000 -> 00000000:173d6000
  ph data[0]=0:173d5000 (1fff)
  get Phys(data[n=1+2000]=f6fa8000)
AtapiVirtToPhysAddr_: f6fa8000 -> 00000000:173d7000
  ph data[0]=0:173d5000 (2fff)
  get Phys(data[n=1+3000]=f6fa9000)
AtapiVirtToPhysAddr_: f6fa9000 -> 00000000:173d8000
  ph data[0]=0:173d5000 (3fff)
  get Phys(data[n=1+4000]=f6faa000)
AtapiVirtToPhysAddr_: f6faa000 -> 00000000:173d9000
  ph data[0]=0:173d5000 (4fff)
  get Phys(data[n=1+5000]=f6fab000)
AtapiVirtToPhysAddr_: f6fab000 -> 00000000:173d2000
  ph data[1]=0:173d2000 (fff)
  get Phys(data[n=2+1000]=f6fac000)
AtapiVirtToPhysAddr_: f6fac000 -> 00000000:173d3000
  ph data[1]=0:173d2000 (1fff)
  get Phys(data[n=2+2000]=f6fad000)
AtapiVirtToPhysAddr_: f6fad000 -> 00000000:173d4000
  ph data[1]=0:173d2000 (2fff)
  get Phys(data[n=2+3000]=f6fae000)
AtapiVirtToPhysAddr_: f6fae000 -> 00000000:173dd000
  ph data[2]=0:173dd000 (fff)
  get Phys(data[n=3+1000]=f6faf000)
AtapiVirtToPhysAddr_: f6faf000 -> 00000000:173de000
  ph data[2]=0:173dd000 (1fff)
  get Phys(data[n=3+2000]=f6fb0000)
AtapiVirtToPhysAddr_: f6fb0000 -> 00000000:173df000
  ph data[2]=0:173dd000 (2fff)
  get Phys(data[n=3+3000]=f6fb1000)
AtapiVirtToPhysAddr_: f6fb1000 -> 00000000:173e0000
  ph data[2]=0:173dd000 (3fff)
  get Phys(data[n=3+4000]=f6fb2000)
AtapiVirtToPhysAddr_: f6fb2000 -> 00000000:173e1000
  ph data[2]=0:173dd000 (4fff)
  get Phys(data[n=3+5000]=f6fb3000)
AtapiVirtToPhysAddr_: f6fb3000 -> 00000000:173da000
  ph data[3]=0:173da000 (fff)
  get Phys(data[n=4+1000]=f6fb4000)
AtapiVirtToPhysAddr_: f6fb4000 -> 00000000:173db000
  ph data[3]=0:173da000 (1fff)
  get Phys(data[n=4+2000]=f6fb5000)
AtapiVirtToPhysAddr_: f6fb5000 -> 00000000:173dc000
  ph data[3]=0:173da000 (2fff)
  get Phys(data[n=4+3000]=f6fb6000)
AtapiVirtToPhysAddr_: f6fb6000 -> 00000000:173e5000
  set TERM
  ph data[4]=0:173e5000 (3ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6780180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffaef0, Count 0x82(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0
  AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180)
  prd_length 0x5, flags 0x5, base 8e43180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8200, WordsLeft 8200
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10400, full size 10400
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f0f138, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f0f138
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5f0f138
TopLevel (3), AtaReq 0xb67800f0
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c9230
** Ide: Command AtaReq 0xb67800f0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffc690, OrigWordsRequested 0x8200, DevSize 0x82
IdeReadWrite (REQ): Starting sector is 38ffc690, Number of WORDS 0x8200, DevSize 0x82
  AtaReq 0xb67800f0: cmd aligned b6780180, d=30
  ahci_cmd_ptr 0xb6780180
AtapiDmaSetup: mode 0x0, data f6fa6000, count 10400, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6780180)
AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180
  get Phys(data[0]=f6fa6000)
AtapiVirtToPhysAddr_: f6fa6000 -> 00000000:16760000
  ph data[0]=0:16760000 (fff)
  get Phys(data[n=1+1000]=f6fa7000)
AtapiVirtToPhysAddr_: f6fa7000 -> 00000000:16761000
  ph data[0]=0:16760000 (1fff)
  get Phys(data[n=1+2000]=f6fa8000)
AtapiVirtToPhysAddr_: f6fa8000 -> 00000000:1675a000
  ph data[1]=0:1675a000 (fff)
  get Phys(data[n=2+1000]=f6fa9000)
AtapiVirtToPhysAddr_: f6fa9000 -> 00000000:1675b000
  ph data[1]=0:1675a000 (1fff)
  get Phys(data[n=2+2000]=f6faa000)
AtapiVirtToPhysAddr_: f6faa000 -> 00000000:1675c000
  ph data[1]=0:1675a000 (2fff)
  get Phys(data[n=2+3000]=f6fab000)
AtapiVirtToPhysAddr_: f6fab000 -> 00000000:1675d000
  ph data[1]=0:1675a000 (3fff)
  get Phys(data[n=2+4000]=f6fac000)
AtapiVirtToPhysAddr_: f6fac000 -> 00000000:16766000
  ph data[2]=0:16766000 (fff)
  get Phys(data[n=3+1000]=f6fad000)
AtapiVirtToPhysAddr_: f6fad000 -> 00000000:16767000
  ph data[2]=0:16766000 (1fff)
  get Phys(data[n=3+2000]=f6fae000)
AtapiVirtToPhysAddr_: f6fae000 -> 00000000:16768000
  ph data[2]=0:16766000 (2fff)
  get Phys(data[n=3+3000]=f6faf000)
AtapiVirtToPhysAddr_: f6faf000 -> 00000000:16769000
  ph data[2]=0:16766000 (3fff)
  get Phys(data[n=3+4000]=f6fb0000)
AtapiVirtToPhysAddr_: f6fb0000 -> 00000000:16762000
  ph data[3]=0:16762000 (fff)
  get Phys(data[n=4+1000]=f6fb1000)
AtapiVirtToPhysAddr_: f6fb1000 -> 00000000:16763000
  ph data[3]=0:16762000 (1fff)
  get Phys(data[n=4+2000]=f6fb2000)
AtapiVirtToPhysAddr_: f6fb2000 -> 00000000:16764000
  ph data[3]=0:16762000 (2fff)
  get Phys(data[n=4+3000]=f6fb3000)
AtapiVirtToPhysAddr_: f6fb3000 -> 00000000:16765000
  ph data[3]=0:16762000 (3fff)
  get Phys(data[n=4+4000]=f6fb4000)
AtapiVirtToPhysAddr_: f6fb4000 -> 00000000:1676e000
  ph data[4]=0:1676e000 (fff)
  get Phys(data[n=5+1000]=f6fb5000)
AtapiVirtToPhysAddr_: f6fb5000 -> 00000000:1676f000
  ph data[4]=0:1676e000 (1fff)
  get Phys(data[n=5+2000]=f6fb6000)
AtapiVirtToPhysAddr_: f6fb6000 -> 00000000:16770000
  set TERM
  ph data[4]=0:1676e000 (23ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6780180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffc690, Count 0x82(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0
  AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180)
  prd_length 0x5, flags 0x5, base 8e43180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8200, WordsLeft 8200
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10400, full size 10400
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f0f138, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f0f138
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5f0f138
TopLevel (3), AtaReq 0xb67800f0
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c91e0
** Ide: Command AtaReq 0xb67800f0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ff9f00, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ff9f00, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb67800f0: cmd aligned b6780180, d=30
  ahci_cmd_ptr 0xb6780180
AtapiDmaSetup: mode 0x0, data f6ff2000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6780180)
AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180
  get Phys(data[0]=f6ff2000)
AtapiVirtToPhysAddr_: f6ff2000 -> 00000000:15d11000
  ph data[0]=0:15d11000 (fff)
  get Phys(data[n=1+1000]=f6ff3000)
AtapiVirtToPhysAddr_: f6ff3000 -> 00000000:15d12000
  ph data[0]=0:15d11000 (1fff)
  get Phys(data[n=1+2000]=f6ff4000)
AtapiVirtToPhysAddr_: f6ff4000 -> 00000000:15d13000
  ph data[0]=0:15d11000 (2fff)
  get Phys(data[n=1+3000]=f6ff5000)
AtapiVirtToPhysAddr_: f6ff5000 -> 00000000:15d0c000
  ph data[1]=0:15d0c000 (fff)
  get Phys(data[n=2+1000]=f6ff6000)
AtapiVirtToPhysAddr_: f6ff6000 -> 00000000:15d0d000
  ph data[1]=0:15d0c000 (1fff)
  get Phys(data[n=2+2000]=f6ff7000)
AtapiVirtToPhysAddr_: f6ff7000 -> 00000000:15d0e000
  ph data[1]=0:15d0c000 (2fff)
  get Phys(data[n=2+3000]=f6ff8000)
AtapiVirtToPhysAddr_: f6ff8000 -> 00000000:15d0f000
  ph data[1]=0:15d0c000 (3fff)
  get Phys(data[n=2+4000]=f6ff9000)
AtapiVirtToPhysAddr_: f6ff9000 -> 00000000:15d18000
  ph data[2]=0:15d18000 (fff)
  get Phys(data[n=3+1000]=f6ffa000)
AtapiVirtToPhysAddr_: f6ffa000 -> 00000000:15d19000
  ph data[2]=0:15d18000 (1fff)
  get Phys(data[n=3+2000]=f6ffb000)
AtapiVirtToPhysAddr_: f6ffb000 -> 00000000:15d1a000
  ph data[2]=0:15d18000 (2fff)
  get Phys(data[n=3+3000]=f6ffc000)
AtapiVirtToPhysAddr_: f6ffc000 -> 00000000:15d1b000
  ph data[2]=0:15d18000 (3fff)
  get Phys(data[n=3+4000]=f6ffd000)
AtapiVirtToPhysAddr_: f6ffd000 -> 00000000:15d14000
  ph data[3]=0:15d14000 (fff)
  get Phys(data[n=4+1000]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:15d15000
  ph data[3]=0:15d14000 (1fff)
  get Phys(data[n=4+2000]=f6fff000)
AtapiVirtToPhysAddr_: f6fff000 -> 00000000:15d16000
  ph data[3]=0:15d14000 (2fff)
  get Phys(data[n=4+3000]=f7000000)
AtapiVirtToPhysAddr_: f7000000 -> 00000000:15d17000
  ph data[3]=0:15d14000 (3fff)
  get Phys(data[n=4+4000]=f7001000)
AtapiVirtToPhysAddr_: f7001000 -> 00000000:15d20000
  set TERM
  ph data[4]=0:15d20000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6780180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ff9f00, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0
  AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180)
  prd_length 0x5, flags 0x5, base 8e43180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677e0c0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c91e0
** Ide: Command AtaReq 0xb677e0c0
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ff9f80, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ff9f80, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677e0c0: cmd aligned b677e180, d=60
  ahci_cmd_ptr 0xb677e180
AtapiDmaSetup: mode 0x0, data f7002000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677e180)
AtapiVirtToPhysAddr_: b677e180 -> 00000000:08e41180
  get Phys(data[0]=f7002000)
AtapiVirtToPhysAddr_: f7002000 -> 00000000:15d21000
  ph data[0]=0:15d21000 (fff)
  get Phys(data[n=1+1000]=f7003000)
AtapiVirtToPhysAddr_: f7003000 -> 00000000:15d22000
  ph data[0]=0:15d21000 (1fff)
  get Phys(data[n=1+2000]=f7004000)
AtapiVirtToPhysAddr_: f7004000 -> 00000000:15d23000
  ph data[0]=0:15d21000 (2fff)
  get Phys(data[n=1+3000]=f7005000)
AtapiVirtToPhysAddr_: f7005000 -> 00000000:15d1c000
  ph data[1]=0:15d1c000 (fff)
  get Phys(data[n=2+1000]=f7006000)
AtapiVirtToPhysAddr_: f7006000 -> 00000000:15d1d000
  ph data[1]=0:15d1c000 (1fff)
  get Phys(data[n=2+2000]=f7007000)
AtapiVirtToPhysAddr_: f7007000 -> 00000000:15d1e000
  ph data[1]=0:15d1c000 (2fff)
  get Phys(data[n=2+3000]=f7008000)
AtapiVirtToPhysAddr_: f7008000 -> 00000000:15d1f000
  ph data[1]=0:15d1c000 (3fff)
  get Phys(data[n=2+4000]=f7009000)
AtapiVirtToPhysAddr_: f7009000 -> 00000000:15d28000
  ph data[2]=0:15d28000 (fff)
  get Phys(data[n=3+1000]=f700a000)
AtapiVirtToPhysAddr_: f700a000 -> 00000000:15d29000
  ph data[2]=0:15d28000 (1fff)
  get Phys(data[n=3+2000]=f700b000)
AtapiVirtToPhysAddr_: f700b000 -> 00000000:15d2a000
  ph data[2]=0:15d28000 (2fff)
  get Phys(data[n=3+3000]=f700c000)
AtapiVirtToPhysAddr_: f700c000 -> 00000000:15d2b000
  ph data[2]=0:15d28000 (3fff)
  get Phys(data[n=3+4000]=f700d000)
AtapiVirtToPhysAddr_: f700d000 -> 00000000:15d24000
  ph data[3]=0:15d24000 (fff)
  get Phys(data[n=4+1000]=f700e000)
AtapiVirtToPhysAddr_: f700e000 -> 00000000:15d25000
  ph data[3]=0:15d24000 (1fff)
  get Phys(data[n=4+2000]=f700f000)
AtapiVirtToPhysAddr_: f700f000 -> 00000000:15d26000
  ph data[3]=0:15d24000 (2fff)
  get Phys(data[n=4+3000]=f7010000)
AtapiVirtToPhysAddr_: f7010000 -> 00000000:15d27000
  ph data[3]=0:15d24000 (3fff)
  get Phys(data[n=4+4000]=f7011000)
AtapiVirtToPhysAddr_: f7011000 -> 00000000:15d30000
  set TERM
  ph data[4]=0:15d30000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677e180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f0f138, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f0f138
AtapiInterrupt: NextRequest, srb=0xb6346750
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677e0c0, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677e0c0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ff9f80, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677e0c0
  AHCI AtaReq CMD 0xb677e180 (ph 0x8e41180)
  prd_length 0x5, flags 0x5, base 8e41180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c91e0
** Ide: Command AtaReq 0xb67800f0
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffa000, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38ffa000, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb67800f0: cmd aligned b6780180, d=30
  ahci_cmd_ptr 0xb6780180
AtapiDmaSetup: mode 0x0, data f7012000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6780180)
AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180
  get Phys(data[0]=f7012000)
AtapiVirtToPhysAddr_: f7012000 -> 00000000:15d31000
  ph data[0]=0:15d31000 (fff)
  get Phys(data[n=1+1000]=f7013000)
AtapiVirtToPhysAddr_: f7013000 -> 00000000:15d32000
  ph data[0]=0:15d31000 (1fff)
  get Phys(data[n=1+2000]=f7014000)
AtapiVirtToPhysAddr_: f7014000 -> 00000000:15d33000
  ph data[0]=0:15d31000 (2fff)
  get Phys(data[n=1+3000]=f7015000)
AtapiVirtToPhysAddr_: f7015000 -> 00000000:15d2c000
  ph data[1]=0:15d2c000 (fff)
  get Phys(data[n=2+1000]=f7016000)
AtapiVirtToPhysAddr_: f7016000 -> 00000000:15d2d000
  ph data[1]=0:15d2c000 (1fff)
  get Phys(data[n=2+2000]=f7017000)
AtapiVirtToPhysAddr_: f7017000 -> 00000000:15d2e000
  ph data[1]=0:15d2c000 (2fff)
  get Phys(data[n=2+3000]=f7018000)
AtapiVirtToPhysAddr_: f7018000 -> 00000000:15d2f000
  ph data[1]=0:15d2c000 (3fff)
  get Phys(data[n=2+4000]=f7019000)
AtapiVirtToPhysAddr_: f7019000 -> 00000000:15d38000
  ph data[2]=0:15d38000 (fff)
  get Phys(data[n=3+1000]=f701a000)
AtapiVirtToPhysAddr_: f701a000 -> 00000000:15d39000
  ph data[2]=0:15d38000 (1fff)
  get Phys(data[n=3+2000]=f701b000)
AtapiVirtToPhysAddr_: f701b000 -> 00000000:15d3a000
  ph data[2]=0:15d38000 (2fff)
  get Phys(data[n=3+3000]=f701c000)
AtapiVirtToPhysAddr_: f701c000 -> 00000000:15d3b000
  ph data[2]=0:15d38000 (3fff)
  get Phys(data[n=3+4000]=f701d000)
AtapiVirtToPhysAddr_: f701d000 -> 00000000:15d34000
  ph data[3]=0:15d34000 (fff)
  get Phys(data[n=4+1000]=f701e000)
AtapiVirtToPhysAddr_: f701e000 -> 00000000:15d35000
  ph data[3]=0:15d34000 (1fff)
  get Phys(data[n=4+2000]=f701f000)
AtapiVirtToPhysAddr_: f701f000 -> 00000000:15d36000
  ph data[3]=0:15d34000 (2fff)
  get Phys(data[n=4+3000]=f7020000)
AtapiVirtToPhysAddr_: f7020000 -> 00000000:15d37000
  ph data[3]=0:15d34000 (3fff)
  get Phys(data[n=4+4000]=f7021000)
AtapiVirtToPhysAddr_: f7021000 -> 00000000:15d40000
  set TERM
  ph data[4]=0:15d40000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6780180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0xb5f0f138
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c90b4
** Ide: Command AtaReq 0xb67800f0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffa000, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0
  AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180)
  prd_length 0x5, flags 0x5, base 8e43180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677e0c0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77c91e0
** Ide: Command AtaReq 0xb677e0c0
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38ffa080, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 38ffa080, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677e0c0: cmd aligned b677e180, d=60
  ahci_cmd_ptr 0xb677e180
AtapiDmaSetup: mode 0x0, data f7022000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677e180)
AtapiVirtToPhysAddr_: b677e180 -> 00000000:08e41180
  get Phys(data[0]=f7022000)
AtapiVirtToPhysAddr_: f7022000 -> 00000000:15d41000
  set TERM
  ph data[0]=0:15d41000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677e180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f0f138, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f0f138
AtapiInterrupt: NextRequest, srb=0xb6346750
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677e0c0, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677e0c0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38ffa080, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677e0c0
  AHCI AtaReq CMD 0xb677e180 (ph 0x8e41180)
  prd_length 0x1, flags 0x5, base 8e41180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
err:(dll/win32/lsasrv/lsarpc.c:1452) LsapOpenDbObject(Accounts/S-1-5-11) failed (Status 0xc0000034)
err:(dll/win32/lsasrv/lsarpc.c:1452) LsapOpenDbObject(Accounts/S-1-5-5-0-7893) failed (Status 0xc0000034)
err:(dll/win32/lsasrv/lsarpc.c:1452) LsapOpenDbObject(Accounts/S-1-2-0) failed (Status 0xc0000034)
(dll/win32/userenv/profile.c:1455) Loading profile S-1-5-20
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5f0f138
TopLevel (3), AtaReq 0xb67800f0
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704ac68
** Ide: Command AtaReq 0xb67800f0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38f95800, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38f95800, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb67800f0: cmd aligned b6780180, d=30
  ahci_cmd_ptr 0xb6780180
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6780180)
AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:15d69000
  ph data[0]=0:15d69000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:15d62000
  set TERM
  ph data[1]=0:15d62000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6780180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f95800, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0
  AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180)
  prd_length 0x2, flags 0x5, base 8e43180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
err:(dll/win32/lsasrv/lsarpc.c:1452) LsapOpenDbObject(Accounts/S-1-5-21-1597525787-481046968-426783556-513) failed (Status 0xc0000034)
err:(dll/win32/lsasrv/lsarpc.c:1452) LsapOpenDbObject(Accounts/S-1-5-11) failed (Status 0xc0000034)
err:(dll/win32/lsasrv/lsarpc.c:1452) LsapOpenDbObject(Accounts/S-1-5-5-0-7953) failed (Status 0xc0000034)
err:(dll/win32/lsasrv/lsarpc.c:1452) LsapOpenDbObject(Accounts/S-1-2-0) failed (Status 0xc0000034)
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f0f138, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f0f138
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5f0f138
TopLevel (3), AtaReq 0xb67800f0
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704ac68
** Ide: Command AtaReq 0xb67800f0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38f95a50, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38f95a50, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb67800f0: cmd aligned b6780180, d=30
  ahci_cmd_ptr 0xb6780180
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6780180)
AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:15db6000
  ph data[0]=0:15db6000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:15daf000
  set TERM
  ph data[1]=0:15daf000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6780180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f95a50, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0
  AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180)
  prd_length 0x2, flags 0x5, base 8e43180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f0f138, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f0f138
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5f0f138
TopLevel (3), AtaReq 0xb67800f0
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704ac68
** Ide: Command AtaReq 0xb67800f0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fac490, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fac490, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb67800f0: cmd aligned b6780180, d=30
  ahci_cmd_ptr 0xb6780180
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6780180)
AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:15df4000
  ph data[0]=0:15df4000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:15df5000
  set TERM
  ph data[0]=0:15df4000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6780180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fac490, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0
  AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180)
  prd_length 0x1, flags 0x5, base 8e43180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
(dll/win32/userenv/profile.c:1455) Loading profile S-1-5-21-1597525787-481046968-426783556-500
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f0f138, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f0f138
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5f0f138
TopLevel (3), AtaReq 0xb67800f0
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74fec68
** Ide: Command AtaReq 0xb67800f0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38faca20, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38faca20, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb67800f0: cmd aligned b6780180, d=30
  ahci_cmd_ptr 0xb6780180
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6780180)
AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:15e42000
  ph data[0]=0:15e42000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:15e43000
  set TERM
  ph data[0]=0:15e42000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6780180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38faca20, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0
  AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180)
  prd_length 0x1, flags 0x5, base 8e43180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677e0c0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7665418
** Ide: Command AtaReq 0xb677e0c0
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3960b060, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3960b060, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677e0c0: cmd aligned b677e180, d=60
  ahci_cmd_ptr 0xb677e180
AtapiDmaSetup: mode 0x0, data f700a000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677e180)
AtapiVirtToPhysAddr_: b677e180 -> 00000000:08e41180
  get Phys(data[0]=f700a000)
AtapiVirtToPhysAddr_: f700a000 -> 00000000:15e82000
  ph data[0]=0:15e82000 (fff)
  get Phys(data[n=1+1000]=f700b000)
AtapiVirtToPhysAddr_: f700b000 -> 00000000:15e83000
  ph data[0]=0:15e82000 (1fff)
  get Phys(data[n=1+2000]=f700c000)
AtapiVirtToPhysAddr_: f700c000 -> 00000000:15e8c000
  ph data[1]=0:15e8c000 (fff)
  get Phys(data[n=2+1000]=f700d000)
AtapiVirtToPhysAddr_: f700d000 -> 00000000:15e85000
  ph data[2]=0:15e85000 (fff)
  get Phys(data[n=3+1000]=f700e000)
AtapiVirtToPhysAddr_: f700e000 -> 00000000:15e8e000
  ph data[3]=0:15e8e000 (fff)
  get Phys(data[n=4+1000]=f700f000)
AtapiVirtToPhysAddr_: f700f000 -> 00000000:15e7f000
  ph data[4]=0:15e7f000 (fff)
  get Phys(data[n=5+1000]=f7010000)
AtapiVirtToPhysAddr_: f7010000 -> 00000000:15e88000
  ph data[5]=0:15e88000 (fff)
  get Phys(data[n=6+1000]=f7011000)
AtapiVirtToPhysAddr_: f7011000 -> 00000000:15e91000
  ph data[6]=0:15e91000 (fff)
  get Phys(data[n=7+1000]=f7012000)
AtapiVirtToPhysAddr_: f7012000 -> 00000000:15e8a000
  ph data[7]=0:15e8a000 (fff)
  get Phys(data[n=8+1000]=f7013000)
AtapiVirtToPhysAddr_: f7013000 -> 00000000:15e8b000
  ph data[7]=0:15e8a000 (1fff)
  get Phys(data[n=8+2000]=f7014000)
AtapiVirtToPhysAddr_: f7014000 -> 00000000:15e94000
  ph data[8]=0:15e94000 (fff)
  get Phys(data[n=9+1000]=f7015000)
AtapiVirtToPhysAddr_: f7015000 -> 00000000:15e8d000
  ph data[9]=0:15e8d000 (fff)
  get Phys(data[n=10+1000]=f7016000)
AtapiVirtToPhysAddr_: f7016000 -> 00000000:15e96000
  ph data[10]=0:15e96000 (fff)
  get Phys(data[n=11+1000]=f7017000)
AtapiVirtToPhysAddr_: f7017000 -> 00000000:15e87000
  ph data[11]=0:15e87000 (fff)
  get Phys(data[n=12+1000]=f7018000)
AtapiVirtToPhysAddr_: f7018000 -> 00000000:15e90000
  ph data[12]=0:15e90000 (fff)
  get Phys(data[n=13+1000]=f7019000)
AtapiVirtToPhysAddr_: f7019000 -> 00000000:15e99000
  set TERM
  ph data[13]=0:15e99000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677e180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f10448, CDB 0xb5f10478, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7665418
** Ide: Command AtaReq 0xb677b078
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3960b0e0, OrigWordsRequested 0x4800, DevSize 0x48
IdeReadWrite (REQ): Starting sector is 3960b0e0, Number of WORDS 0x4800, DevSize 0x48
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f701a000, count 9000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f701a000)
AtapiVirtToPhysAddr_: f701a000 -> 00000000:15e92000
  ph data[0]=0:15e92000 (fff)
  get Phys(data[n=1+1000]=f701b000)
AtapiVirtToPhysAddr_: f701b000 -> 00000000:15e93000
  ph data[0]=0:15e92000 (1fff)
  get Phys(data[n=1+2000]=f701c000)
AtapiVirtToPhysAddr_: f701c000 -> 00000000:15e9c000
  ph data[1]=0:15e9c000 (fff)
  get Phys(data[n=2+1000]=f701d000)
AtapiVirtToPhysAddr_: f701d000 -> 00000000:15e95000
  ph data[2]=0:15e95000 (fff)
  get Phys(data[n=3+1000]=f701e000)
AtapiVirtToPhysAddr_: f701e000 -> 00000000:15e9e000
  ph data[3]=0:15e9e000 (fff)
  get Phys(data[n=4+1000]=f701f000)
AtapiVirtToPhysAddr_: f701f000 -> 00000000:15e8f000
  ph data[4]=0:15e8f000 (fff)
  get Phys(data[n=5+1000]=f7020000)
AtapiVirtToPhysAddr_: f7020000 -> 00000000:15e98000
  ph data[5]=0:15e98000 (fff)
  get Phys(data[n=6+1000]=f7021000)
AtapiVirtToPhysAddr_: f7021000 -> 00000000:15ea1000
  ph data[6]=0:15ea1000 (fff)
  get Phys(data[n=7+1000]=f7022000)
AtapiVirtToPhysAddr_: f7022000 -> 00000000:15e9a000
  set TERM
  ph data[7]=0:15e9a000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b5f10448
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f0f138, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f0f138
AtapiInterrupt: NextRequest, srb=0xb6346750
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677e0c0, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6fdaeb4
** Ide: Command AtaReq 0xb677e0c0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3960b060, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677e0c0
  AHCI AtaReq CMD 0xb677e180 (ph 0x8e41180)
  prd_length 0xe, flags 0x5, base 8e41180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0xb5f10448
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f10448, CDB 0xb5f10478, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6fdacfc
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3960b0e0, Count 0x48(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x8, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f10448
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 4800, WordsLeft 4800
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 9000, full size 9000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f10448, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f10448
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f10448, CDB 0xb5f10478, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5f10448
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704a744
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38f95a50, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38f95a50, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:1376f000
  ph data[0]=0:1376f000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:13770000
  set TERM
  ph data[0]=0:1376f000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f95a50, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f10448
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f10448, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f10448
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f10448, CDB 0xb5f10478, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5f10448
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704a744
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fac490, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fac490, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:137af000
  ph data[0]=0:137af000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:137b0000
  set TERM
  ph data[0]=0:137af000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fac490, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f10448
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f10448, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f10448
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f10448, CDB 0xb5f10478, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5f10448
TopLevel (3), AtaReq 0xb677b078
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704ad7c
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fac4a0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fac4a0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f6ffc000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f6ffc000)
AtapiVirtToPhysAddr_: f6ffc000 -> 00000000:137f0000
  ph data[0]=0:137f0000 (fff)
  get Phys(data[n=1+1000]=f6ffd000)
AtapiVirtToPhysAddr_: f6ffd000 -> 00000000:137f1000
  ph data[0]=0:137f0000 (1fff)
  get Phys(data[n=1+2000]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:137f2000
  ph data[0]=0:137f0000 (2fff)
  get Phys(data[n=1+3000]=f6fff000)
AtapiVirtToPhysAddr_: f6fff000 -> 00000000:137f3000
  ph data[0]=0:137f0000 (3fff)
  get Phys(data[n=1+4000]=f7000000)
AtapiVirtToPhysAddr_: f7000000 -> 00000000:137fc000
  ph data[1]=0:137fc000 (fff)
  get Phys(data[n=2+1000]=f7001000)
AtapiVirtToPhysAddr_: f7001000 -> 00000000:137f5000
  ph data[2]=0:137f5000 (fff)
  get Phys(data[n=3+1000]=f7002000)
AtapiVirtToPhysAddr_: f7002000 -> 00000000:137ee000
  ph data[3]=0:137ee000 (fff)
  get Phys(data[n=4+1000]=f7003000)
AtapiVirtToPhysAddr_: f7003000 -> 00000000:137ef000
  ph data[3]=0:137ee000 (1fff)
  get Phys(data[n=4+2000]=f7004000)
AtapiVirtToPhysAddr_: f7004000 -> 00000000:137f8000
  ph data[4]=0:137f8000 (fff)
  get Phys(data[n=5+1000]=f7005000)
AtapiVirtToPhysAddr_: f7005000 -> 00000000:137f9000
  ph data[4]=0:137f8000 (1fff)
  get Phys(data[n=5+2000]=f7006000)
AtapiVirtToPhysAddr_: f7006000 -> 00000000:137fa000
  ph data[4]=0:137f8000 (2fff)
  get Phys(data[n=5+3000]=f7007000)
AtapiVirtToPhysAddr_: f7007000 -> 00000000:137fb000
  ph data[4]=0:137f8000 (3fff)
  get Phys(data[n=5+4000]=f7008000)
AtapiVirtToPhysAddr_: f7008000 -> 00000000:13804000
  ph data[5]=0:13804000 (fff)
  get Phys(data[n=6+1000]=f7009000)
AtapiVirtToPhysAddr_: f7009000 -> 00000000:137fd000
  ph data[6]=0:137fd000 (fff)
  get Phys(data[n=7+1000]=f700a000)
AtapiVirtToPhysAddr_: f700a000 -> 00000000:137f6000
  ph data[7]=0:137f6000 (fff)
  get Phys(data[n=8+1000]=f700b000)
AtapiVirtToPhysAddr_: f700b000 -> 00000000:137f7000
  set TERM
  ph data[7]=0:137f6000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fac4a0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x8, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f10448
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677e0c0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704ad7c
** Ide: Command AtaReq 0xb677e0c0
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fac520, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fac520, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677e0c0: cmd aligned b677e180, d=60
  ahci_cmd_ptr 0xb677e180
AtapiDmaSetup: mode 0x0, data f700c000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677e180)
AtapiVirtToPhysAddr_: b677e180 -> 00000000:08e41180
  get Phys(data[0]=f700c000)
AtapiVirtToPhysAddr_: f700c000 -> 00000000:13800000
  ph data[0]=0:13800000 (fff)
  get Phys(data[n=1+1000]=f700d000)
AtapiVirtToPhysAddr_: f700d000 -> 00000000:13801000
  ph data[0]=0:13800000 (1fff)
  get Phys(data[n=1+2000]=f700e000)
AtapiVirtToPhysAddr_: f700e000 -> 00000000:13802000
  ph data[0]=0:13800000 (2fff)
  get Phys(data[n=1+3000]=f700f000)
AtapiVirtToPhysAddr_: f700f000 -> 00000000:13803000
  ph data[0]=0:13800000 (3fff)
  get Phys(data[n=1+4000]=f7010000)
AtapiVirtToPhysAddr_: f7010000 -> 00000000:1380c000
  ph data[1]=0:1380c000 (fff)
  get Phys(data[n=2+1000]=f7011000)
AtapiVirtToPhysAddr_: f7011000 -> 00000000:13805000
  ph data[2]=0:13805000 (fff)
  get Phys(data[n=3+1000]=f7012000)
AtapiVirtToPhysAddr_: f7012000 -> 00000000:137fe000
  ph data[3]=0:137fe000 (fff)
  get Phys(data[n=4+1000]=f7013000)
AtapiVirtToPhysAddr_: f7013000 -> 00000000:137ff000
  ph data[3]=0:137fe000 (1fff)
  get Phys(data[n=4+2000]=f7014000)
AtapiVirtToPhysAddr_: f7014000 -> 00000000:13808000
  ph data[4]=0:13808000 (fff)
  get Phys(data[n=5+1000]=f7015000)
AtapiVirtToPhysAddr_: f7015000 -> 00000000:13809000
  ph data[4]=0:13808000 (1fff)
  get Phys(data[n=5+2000]=f7016000)
AtapiVirtToPhysAddr_: f7016000 -> 00000000:1380a000
  ph data[4]=0:13808000 (2fff)
  get Phys(data[n=5+3000]=f7017000)
AtapiVirtToPhysAddr_: f7017000 -> 00000000:1380b000
  ph data[4]=0:13808000 (3fff)
  get Phys(data[n=5+4000]=f7018000)
AtapiVirtToPhysAddr_: f7018000 -> 00000000:13814000
  ph data[5]=0:13814000 (fff)
  get Phys(data[n=6+1000]=f7019000)
AtapiVirtToPhysAddr_: f7019000 -> 00000000:1380d000
  ph data[6]=0:1380d000 (fff)
  get Phys(data[n=7+1000]=f701a000)
AtapiVirtToPhysAddr_: f701a000 -> 00000000:13806000
  ph data[7]=0:13806000 (fff)
  get Phys(data[n=8+1000]=f701b000)
AtapiVirtToPhysAddr_: f701b000 -> 00000000:13807000
  set TERM
  ph data[7]=0:13806000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677e180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704ad7c
** Ide: Command AtaReq 0xb67800f0
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fac5a0, OrigWordsRequested 0x3800, DevSize 0x38
IdeReadWrite (REQ): Starting sector is 38fac5a0, Number of WORDS 0x3800, DevSize 0x38
  AtaReq 0xb67800f0: cmd aligned b6780180, d=30
  ahci_cmd_ptr 0xb6780180
AtapiDmaSetup: mode 0x0, data f701c000, count 7000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6780180)
AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180
  get Phys(data[0]=f701c000)
AtapiVirtToPhysAddr_: f701c000 -> 00000000:13810000
  ph data[0]=0:13810000 (fff)
  get Phys(data[n=1+1000]=f701d000)
AtapiVirtToPhysAddr_: f701d000 -> 00000000:13811000
  ph data[0]=0:13810000 (1fff)
  get Phys(data[n=1+2000]=f701e000)
AtapiVirtToPhysAddr_: f701e000 -> 00000000:13812000
  ph data[0]=0:13810000 (2fff)
  get Phys(data[n=1+3000]=f701f000)
AtapiVirtToPhysAddr_: f701f000 -> 00000000:13813000
  ph data[0]=0:13810000 (3fff)
  get Phys(data[n=1+4000]=f7020000)
AtapiVirtToPhysAddr_: f7020000 -> 00000000:1381c000
  ph data[1]=0:1381c000 (fff)
  get Phys(data[n=2+1000]=f7021000)
AtapiVirtToPhysAddr_: f7021000 -> 00000000:13815000
  ph data[2]=0:13815000 (fff)
  get Phys(data[n=3+1000]=f7022000)
AtapiVirtToPhysAddr_: f7022000 -> 00000000:1380e000
  set TERM
  ph data[3]=0:1380e000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6780180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f10448, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f10448
AtapiInterrupt: NextRequest, srb=0xb6346750
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677e0c0, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704ac50
** Ide: Command AtaReq 0xb677e0c0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fac520, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677e0c0
  AHCI AtaReq CMD 0xb677e180 (ph 0x8e41180)
  prd_length 0x8, flags 0x5, base 8e41180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0xb5f0f138
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6fa3460
** Ide: Command AtaReq 0xb67800f0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fac5a0, Count 0x38(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0
  AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180)
  prd_length 0x4, flags 0x5, base 8e43180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 3800, WordsLeft 3800
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 7000, full size 7000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f0f138, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f0f138
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(ntoskrnl/config/cmcheck.c:25) CmCheckRegistry(0xB5EF1008, 0) is UNIMPLEMENTED!
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677e0c0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6346750
TopLevel (3), AtaReq 0xb677e0c0
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74fe744
** Ide: Command AtaReq 0xb677e0c0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38faca20, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38faca20, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677e0c0: cmd aligned b677e180, d=60
  ahci_cmd_ptr 0xb677e180
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677e180)
AtapiVirtToPhysAddr_: b677e180 -> 00000000:08e41180
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:12fb4000
  ph data[0]=0:12fb4000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:12fad000
  set TERM
  ph data[1]=0:12fad000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677e180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38faca20, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677e0c0
  AHCI AtaReq CMD 0xb677e180 (ph 0x8e41180)
  prd_length 0x2, flags 0x5, base 8e41180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677e0c0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb6346750
TopLevel (3), AtaReq 0xb677e0c0
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74fed7c
** Ide: Command AtaReq 0xb677e0c0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38faca30, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38faca30, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677e0c0: cmd aligned b677e180, d=60
  ahci_cmd_ptr 0xb677e180
AtapiDmaSetup: mode 0x0, data f6ff6000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677e180)
AtapiVirtToPhysAddr_: b677e180 -> 00000000:08e41180
  get Phys(data[0]=f6ff6000)
AtapiVirtToPhysAddr_: f6ff6000 -> 00000000:12fed000
  ph data[0]=0:12fed000 (fff)
  get Phys(data[n=1+1000]=f6ff7000)
AtapiVirtToPhysAddr_: f6ff7000 -> 00000000:12fee000
  ph data[0]=0:12fed000 (1fff)
  get Phys(data[n=1+2000]=f6ff8000)
AtapiVirtToPhysAddr_: f6ff8000 -> 00000000:12fef000
  ph data[0]=0:12fed000 (2fff)
  get Phys(data[n=1+3000]=f6ff9000)
AtapiVirtToPhysAddr_: f6ff9000 -> 00000000:12ff0000
  ph data[0]=0:12fed000 (3fff)
  get Phys(data[n=1+4000]=f6ffa000)
AtapiVirtToPhysAddr_: f6ffa000 -> 00000000:12ff1000
  ph data[0]=0:12fed000 (4fff)
  get Phys(data[n=1+5000]=f6ffb000)
AtapiVirtToPhysAddr_: f6ffb000 -> 00000000:12ff2000
  ph data[0]=0:12fed000 (5fff)
  get Phys(data[n=1+6000]=f6ffc000)
AtapiVirtToPhysAddr_: f6ffc000 -> 00000000:12ff3000
  ph data[0]=0:12fed000 (6fff)
  get Phys(data[n=1+7000]=f6ffd000)
AtapiVirtToPhysAddr_: f6ffd000 -> 00000000:12ff4000
  ph data[0]=0:12fed000 (7fff)
  get Phys(data[n=1+8000]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:12ff5000
  ph data[0]=0:12fed000 (8fff)
  get Phys(data[n=1+9000]=f6fff000)
AtapiVirtToPhysAddr_: f6fff000 -> 00000000:12ff6000
  ph data[0]=0:12fed000 (9fff)
  get Phys(data[n=1+a000]=f7000000)
AtapiVirtToPhysAddr_: f7000000 -> 00000000:12ff7000
  ph data[0]=0:12fed000 (afff)
  get Phys(data[n=1+b000]=f7001000)
AtapiVirtToPhysAddr_: f7001000 -> 00000000:12ff8000
  ph data[0]=0:12fed000 (bfff)
  get Phys(data[n=1+c000]=f7002000)
AtapiVirtToPhysAddr_: f7002000 -> 00000000:12ff9000
  ph data[0]=0:12fed000 (cfff)
  get Phys(data[n=1+d000]=f7003000)
AtapiVirtToPhysAddr_: f7003000 -> 00000000:12ffa000
  ph data[0]=0:12fed000 (dfff)
  get Phys(data[n=1+e000]=f7004000)
AtapiVirtToPhysAddr_: f7004000 -> 00000000:12ffb000
  ph data[0]=0:12fed000 (efff)
  get Phys(data[n=1+f000]=f7005000)
AtapiVirtToPhysAddr_: f7005000 -> 00000000:12ffc000
  set TERM
  ph data[0]=0:12fed000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677e180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38faca30, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677e0c0
  AHCI AtaReq CMD 0xb677e180 (ph 0x8e41180)
  prd_length 0x1, flags 0x5, base 8e41180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74fed7c
** Ide: Command AtaReq 0xb67800f0
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38facab0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38facab0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb67800f0: cmd aligned b6780180, d=30
  ahci_cmd_ptr 0xb6780180
AtapiDmaSetup: mode 0x0, data f7006000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6780180)
AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180
  get Phys(data[0]=f7006000)
AtapiVirtToPhysAddr_: f7006000 -> 00000000:12ffd000
  ph data[0]=0:12ffd000 (fff)
  get Phys(data[n=1+1000]=f7007000)
AtapiVirtToPhysAddr_: f7007000 -> 00000000:12ffe000
  ph data[0]=0:12ffd000 (1fff)
  get Phys(data[n=1+2000]=f7008000)
AtapiVirtToPhysAddr_: f7008000 -> 00000000:12fff000
  ph data[0]=0:12ffd000 (2fff)
  get Phys(data[n=1+3000]=f7009000)
AtapiVirtToPhysAddr_: f7009000 -> 00000000:13000000
  ph data[0]=0:12ffd000 (3fff)
  get Phys(data[n=1+4000]=f700a000)
AtapiVirtToPhysAddr_: f700a000 -> 00000000:13001000
  ph data[0]=0:12ffd000 (4fff)
  get Phys(data[n=1+5000]=f700b000)
AtapiVirtToPhysAddr_: f700b000 -> 00000000:13002000
  ph data[0]=0:12ffd000 (5fff)
  get Phys(data[n=1+6000]=f700c000)
AtapiVirtToPhysAddr_: f700c000 -> 00000000:13003000
  ph data[0]=0:12ffd000 (6fff)
  get Phys(data[n=1+7000]=f700d000)
AtapiVirtToPhysAddr_: f700d000 -> 00000000:13004000
  ph data[0]=0:12ffd000 (7fff)
  get Phys(data[n=1+8000]=f700e000)
AtapiVirtToPhysAddr_: f700e000 -> 00000000:13005000
  ph data[0]=0:12ffd000 (8fff)
  get Phys(data[n=1+9000]=f700f000)
AtapiVirtToPhysAddr_: f700f000 -> 00000000:13006000
  ph data[0]=0:12ffd000 (9fff)
  get Phys(data[n=1+a000]=f7010000)
AtapiVirtToPhysAddr_: f7010000 -> 00000000:13007000
  ph data[0]=0:12ffd000 (afff)
  get Phys(data[n=1+b000]=f7011000)
AtapiVirtToPhysAddr_: f7011000 -> 00000000:13008000
  ph data[0]=0:12ffd000 (bfff)
  get Phys(data[n=1+c000]=f7012000)
AtapiVirtToPhysAddr_: f7012000 -> 00000000:13009000
  ph data[0]=0:12ffd000 (cfff)
  get Phys(data[n=1+d000]=f7013000)
AtapiVirtToPhysAddr_: f7013000 -> 00000000:1300a000
  ph data[0]=0:12ffd000 (dfff)
  get Phys(data[n=1+e000]=f7014000)
AtapiVirtToPhysAddr_: f7014000 -> 00000000:1300b000
  ph data[0]=0:12ffd000 (efff)
  get Phys(data[n=1+f000]=f7015000)
AtapiVirtToPhysAddr_: f7015000 -> 00000000:1300c000
  set TERM
  ph data[0]=0:12ffd000 (ffff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6780180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f10448, CDB 0xb5f10478, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74fed7c
** Ide: Command AtaReq 0xb677b078
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38facb30, OrigWordsRequested 0x5000, DevSize 0x50
IdeReadWrite (REQ): Starting sector is 38facb30, Number of WORDS 0x5000, DevSize 0x50
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7016000, count a000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7016000)
AtapiVirtToPhysAddr_: f7016000 -> 00000000:1300d000
  ph data[0]=0:1300d000 (fff)
  get Phys(data[n=1+1000]=f7017000)
AtapiVirtToPhysAddr_: f7017000 -> 00000000:1300e000
  ph data[0]=0:1300d000 (1fff)
  get Phys(data[n=1+2000]=f7018000)
AtapiVirtToPhysAddr_: f7018000 -> 00000000:1300f000
  ph data[0]=0:1300d000 (2fff)
  get Phys(data[n=1+3000]=f7019000)
AtapiVirtToPhysAddr_: f7019000 -> 00000000:13010000
  ph data[0]=0:1300d000 (3fff)
  get Phys(data[n=1+4000]=f701a000)
AtapiVirtToPhysAddr_: f701a000 -> 00000000:13011000
  ph data[0]=0:1300d000 (4fff)
  get Phys(data[n=1+5000]=f701b000)
AtapiVirtToPhysAddr_: f701b000 -> 00000000:13012000
  ph data[0]=0:1300d000 (5fff)
  get Phys(data[n=1+6000]=f701c000)
AtapiVirtToPhysAddr_: f701c000 -> 00000000:13013000
  ph data[0]=0:1300d000 (6fff)
  get Phys(data[n=1+7000]=f701d000)
AtapiVirtToPhysAddr_: f701d000 -> 00000000:13014000
  ph data[0]=0:1300d000 (7fff)
  get Phys(data[n=1+8000]=f701e000)
AtapiVirtToPhysAddr_: f701e000 -> 00000000:13015000
  ph data[0]=0:1300d000 (8fff)
  get Phys(data[n=1+9000]=f701f000)
AtapiVirtToPhysAddr_: f701f000 -> 00000000:13016000
  set TERM
  ph data[0]=0:1300d000 (9fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b5f10448
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74fedcc
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39719d40, OrigWordsRequested 0x1800, DevSize 0x18
IdeReadWrite (REQ): Starting sector is 39719d40, Number of WORDS 0x1800, DevSize 0x18
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f7020000, count 3000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f7020000)
AtapiVirtToPhysAddr_: f7020000 -> 00000000:13017000
  ph data[0]=0:13017000 (fff)
  get Phys(data[n=1+1000]=f7021000)
AtapiVirtToPhysAddr_: f7021000 -> 00000000:13018000
  ph data[0]=0:13017000 (1fff)
  get Phys(data[n=1+2000]=f7022000)
AtapiVirtToPhysAddr_: f7022000 -> 00000000:13019000
  set TERM
  ph data[0]=0:13017000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
(drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb
(drivers/usb/usbehci/hardware.cpp:1321) CStatus b
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eedcf0, CDB 0xb5eedd20, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=4
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704ac68
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fac960, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fac960, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:1303b000
  ph data[0]=0:1303b000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:1303c000
  set TERM
  ph data[0]=0:1303b000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 5 request(s)!
AtapiStartIo: next Srb b5eedcf0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6781108, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=5
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb6781108
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f9083c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f9083c, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6781108: cmd aligned b6781180, d=18
  ahci_cmd_ptr 0xb6781180
AtapiDmaSetup: mode 0x0, data f6c58000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6781180)
AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180
  get Phys(data[0]=f6c58000)
AtapiVirtToPhysAddr_: f6c58000 -> 00000000:007d5000
  ph data[0]=0:7d5000 (fff)
  get Phys(data[n=1+1000]=f6c59000)
AtapiVirtToPhysAddr_: f6c59000 -> 00000000:007df000
  ph data[1]=0:7df000 (fff)
  get Phys(data[n=2+1000]=f6c5a000)
AtapiVirtToPhysAddr_: f6c5a000 -> 00000000:007b8000
  ph data[2]=0:7b8000 (fff)
  get Phys(data[n=3+1000]=f6c5b000)
AtapiVirtToPhysAddr_: f6c5b000 -> 00000000:007c1000
  ph data[3]=0:7c1000 (fff)
  get Phys(data[n=4+1000]=f6c5c000)
AtapiVirtToPhysAddr_: f6c5c000 -> 00000000:007ca000
  ph data[4]=0:7ca000 (fff)
  get Phys(data[n=5+1000]=f6c5d000)
AtapiVirtToPhysAddr_: f6c5d000 -> 00000000:007cb000
  ph data[4]=0:7ca000 (1fff)
  get Phys(data[n=5+2000]=f6c5e000)
AtapiVirtToPhysAddr_: f6c5e000 -> 00000000:007cc000
  ph data[4]=0:7ca000 (2fff)
  get Phys(data[n=5+3000]=f6c5f000)
AtapiVirtToPhysAddr_: f6c5f000 -> 00000000:007cd000
  ph data[4]=0:7ca000 (3fff)
  get Phys(data[n=5+4000]=f6c60000)
AtapiVirtToPhysAddr_: f6c60000 -> 00000000:007ce000
  ph data[4]=0:7ca000 (4fff)
  get Phys(data[n=5+5000]=f6c61000)
AtapiVirtToPhysAddr_: f6c61000 -> 00000000:007d7000
  ph data[5]=0:7d7000 (fff)
  get Phys(data[n=6+1000]=f6c62000)
AtapiVirtToPhysAddr_: f6c62000 -> 00000000:007b0000
  ph data[6]=0:7b0000 (fff)
  get Phys(data[n=7+1000]=f6c63000)
AtapiVirtToPhysAddr_: f6c63000 -> 00000000:007b9000
  ph data[7]=0:7b9000 (fff)
  get Phys(data[n=8+1000]=f6c64000)
AtapiVirtToPhysAddr_: f6c64000 -> 00000000:007c2000
  ph data[8]=0:7c2000 (fff)
  get Phys(data[n=9+1000]=f6c65000)
AtapiVirtToPhysAddr_: f6c65000 -> 00000000:007c3000
  ph data[8]=0:7c2000 (1fff)
  get Phys(data[n=9+2000]=f6c66000)
AtapiVirtToPhysAddr_: f6c66000 -> 00000000:007c4000
  ph data[8]=0:7c2000 (2fff)
  get Phys(data[n=9+3000]=f6c67000)
AtapiVirtToPhysAddr_: f6c67000 -> 00000000:007c5000
  set TERM
  ph data[8]=0:7c2000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6781180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 6 request(s)!
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677f0d8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=6
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677f0d8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f908bc, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f908bc, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677f0d8: cmd aligned b677f180, d=48
  ahci_cmd_ptr 0xb677f180
AtapiDmaSetup: mode 0x0, data f6c68000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677f180)
AtapiVirtToPhysAddr_: b677f180 -> 00000000:08e42180
  get Phys(data[0]=f6c68000)
AtapiVirtToPhysAddr_: f6c68000 -> 00000000:007c6000
  ph data[0]=0:7c6000 (fff)
  get Phys(data[n=1+1000]=f6c69000)
AtapiVirtToPhysAddr_: f6c69000 -> 00000000:007cf000
  ph data[1]=0:7cf000 (fff)
  get Phys(data[n=2+1000]=f6c6a000)
AtapiVirtToPhysAddr_: f6c6a000 -> 00000000:007a8000
  ph data[2]=0:7a8000 (fff)
  get Phys(data[n=3+1000]=f6c6b000)
AtapiVirtToPhysAddr_: f6c6b000 -> 00000000:007b1000
  ph data[3]=0:7b1000 (fff)
  get Phys(data[n=4+1000]=f6c6c000)
AtapiVirtToPhysAddr_: f6c6c000 -> 00000000:007ba000
  ph data[4]=0:7ba000 (fff)
  get Phys(data[n=5+1000]=f6c6d000)
AtapiVirtToPhysAddr_: f6c6d000 -> 00000000:007bb000
  ph data[4]=0:7ba000 (1fff)
  get Phys(data[n=5+2000]=f6c6e000)
AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:007bc000
  ph data[4]=0:7ba000 (2fff)
  get Phys(data[n=5+3000]=f6c6f000)
AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:007bd000
  ph data[4]=0:7ba000 (3fff)
  get Phys(data[n=5+4000]=f6c70000)
AtapiVirtToPhysAddr_: f6c70000 -> 00000000:007be000
  ph data[4]=0:7ba000 (4fff)
  get Phys(data[n=5+5000]=f6c71000)
AtapiVirtToPhysAddr_: f6c71000 -> 00000000:007c7000
  ph data[5]=0:7c7000 (fff)
  get Phys(data[n=6+1000]=f6c72000)
AtapiVirtToPhysAddr_: f6c72000 -> 00000000:007a0000
  ph data[6]=0:7a0000 (fff)
  get Phys(data[n=7+1000]=f6c73000)
AtapiVirtToPhysAddr_: f6c73000 -> 00000000:007a9000
  ph data[7]=0:7a9000 (fff)
  get Phys(data[n=8+1000]=f6c74000)
AtapiVirtToPhysAddr_: f6c74000 -> 00000000:007b2000
  ph data[8]=0:7b2000 (fff)
  get Phys(data[n=9+1000]=f6c75000)
AtapiVirtToPhysAddr_: f6c75000 -> 00000000:007b3000
  ph data[8]=0:7b2000 (1fff)
  get Phys(data[n=9+2000]=f6c76000)
AtapiVirtToPhysAddr_: f6c76000 -> 00000000:007b4000
  ph data[8]=0:7b2000 (2fff)
  get Phys(data[n=9+3000]=f6c77000)
AtapiVirtToPhysAddr_: f6c77000 -> 00000000:007b5000
  set TERM
  ph data[8]=0:7b2000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677f180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 7 request(s)!
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6778030, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=7
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f9093c, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f9093c, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f6c78000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f6c78000)
AtapiVirtToPhysAddr_: f6c78000 -> 00000000:007b6000
  ph data[0]=0:7b6000 (fff)
  get Phys(data[n=1+1000]=f6c79000)
AtapiVirtToPhysAddr_: f6c79000 -> 00000000:007bf000
  ph data[1]=0:7bf000 (fff)
  get Phys(data[n=2+1000]=f6c7a000)
AtapiVirtToPhysAddr_: f6c7a000 -> 00000000:00798000
  ph data[2]=0:798000 (fff)
  get Phys(data[n=3+1000]=f6c7b000)
AtapiVirtToPhysAddr_: f6c7b000 -> 00000000:007a1000
  ph data[3]=0:7a1000 (fff)
  get Phys(data[n=4+1000]=f6c7c000)
AtapiVirtToPhysAddr_: f6c7c000 -> 00000000:007aa000
  ph data[4]=0:7aa000 (fff)
  get Phys(data[n=5+1000]=f6c7d000)
AtapiVirtToPhysAddr_: f6c7d000 -> 00000000:007ab000
  ph data[4]=0:7aa000 (1fff)
  get Phys(data[n=5+2000]=f6c7e000)
AtapiVirtToPhysAddr_: f6c7e000 -> 00000000:007ac000
  ph data[4]=0:7aa000 (2fff)
  get Phys(data[n=5+3000]=f6c7f000)
AtapiVirtToPhysAddr_: f6c7f000 -> 00000000:007ad000
  ph data[4]=0:7aa000 (3fff)
  get Phys(data[n=5+4000]=f6c80000)
AtapiVirtToPhysAddr_: f6c80000 -> 00000000:007ae000
  ph data[4]=0:7aa000 (4fff)
  get Phys(data[n=5+5000]=f6c81000)
AtapiVirtToPhysAddr_: f6c81000 -> 00000000:007b7000
  ph data[5]=0:7b7000 (fff)
  get Phys(data[n=6+1000]=f6c82000)
AtapiVirtToPhysAddr_: f6c82000 -> 00000000:00790000
  ph data[6]=0:790000 (fff)
  get Phys(data[n=7+1000]=f6c83000)
AtapiVirtToPhysAddr_: f6c83000 -> 00000000:00799000
  ph data[7]=0:799000 (fff)
  get Phys(data[n=8+1000]=f6c84000)
AtapiVirtToPhysAddr_: f6c84000 -> 00000000:007a2000
  ph data[8]=0:7a2000 (fff)
  get Phys(data[n=9+1000]=f6c85000)
AtapiVirtToPhysAddr_: f6c85000 -> 00000000:007a3000
  ph data[8]=0:7a2000 (1fff)
  get Phys(data[n=9+2000]=f6c86000)
AtapiVirtToPhysAddr_: f6c86000 -> 00000000:007a4000
  ph data[8]=0:7a2000 (2fff)
  get Phys(data[n=9+3000]=f6c87000)
AtapiVirtToPhysAddr_: f6c87000 -> 00000000:007a5000
  set TERM
  ph data[8]=0:7a2000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 8 request(s)!
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed1a8, CDB 0xb5eed1d8, AtaReq 0xb677c090, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=8
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f909bc, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f909bc, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6c88000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6c88000)
AtapiVirtToPhysAddr_: f6c88000 -> 00000000:007a6000
  ph data[0]=0:7a6000 (fff)
  get Phys(data[n=1+1000]=f6c89000)
AtapiVirtToPhysAddr_: f6c89000 -> 00000000:007af000
  ph data[1]=0:7af000 (fff)
  get Phys(data[n=2+1000]=f6c8a000)
AtapiVirtToPhysAddr_: f6c8a000 -> 00000000:00788000
  ph data[2]=0:788000 (fff)
  get Phys(data[n=3+1000]=f6c8b000)
AtapiVirtToPhysAddr_: f6c8b000 -> 00000000:00791000
  ph data[3]=0:791000 (fff)
  get Phys(data[n=4+1000]=f6c8c000)
AtapiVirtToPhysAddr_: f6c8c000 -> 00000000:0079a000
  ph data[4]=0:79a000 (fff)
  get Phys(data[n=5+1000]=f6c8d000)
AtapiVirtToPhysAddr_: f6c8d000 -> 00000000:0079b000
  ph data[4]=0:79a000 (1fff)
  get Phys(data[n=5+2000]=f6c8e000)
AtapiVirtToPhysAddr_: f6c8e000 -> 00000000:0079c000
  ph data[4]=0:79a000 (2fff)
  get Phys(data[n=5+3000]=f6c8f000)
AtapiVirtToPhysAddr_: f6c8f000 -> 00000000:0079d000
  ph data[4]=0:79a000 (3fff)
  get Phys(data[n=5+4000]=f6c90000)
AtapiVirtToPhysAddr_: f6c90000 -> 00000000:0079e000
  ph data[4]=0:79a000 (4fff)
  get Phys(data[n=5+5000]=f6c91000)
AtapiVirtToPhysAddr_: f6c91000 -> 00000000:007a7000
  ph data[5]=0:7a7000 (fff)
  get Phys(data[n=6+1000]=f6c92000)
AtapiVirtToPhysAddr_: f6c92000 -> 00000000:00780000
  ph data[6]=0:780000 (fff)
  get Phys(data[n=7+1000]=f6c93000)
AtapiVirtToPhysAddr_: f6c93000 -> 00000000:00789000
  ph data[7]=0:789000 (fff)
  get Phys(data[n=8+1000]=f6c94000)
AtapiVirtToPhysAddr_: f6c94000 -> 00000000:00792000
  ph data[8]=0:792000 (fff)
  get Phys(data[n=9+1000]=f6c95000)
AtapiVirtToPhysAddr_: f6c95000 -> 00000000:00793000
  ph data[8]=0:792000 (1fff)
  get Phys(data[n=9+2000]=f6c96000)
AtapiVirtToPhysAddr_: f6c96000 -> 00000000:00794000
  ph data[8]=0:792000 (2fff)
  get Phys(data[n=9+3000]=f6c97000)
AtapiVirtToPhysAddr_: f6c97000 -> 00000000:00795000
  set TERM
  ph data[8]=0:792000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 9 request(s)!
AtapiStartIo: next Srb b5eed1a8
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed160, CDB 0xb5eed190, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=9
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f9301e, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f9301e, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6c58000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6c58000)
AtapiVirtToPhysAddr_: f6c58000 -> 00000000:007d5000
  ph data[0]=0:7d5000 (fff)
  get Phys(data[n=1+1000]=f6c59000)
AtapiVirtToPhysAddr_: f6c59000 -> 00000000:007df000
  ph data[1]=0:7df000 (fff)
  get Phys(data[n=2+1000]=f6c5a000)
AtapiVirtToPhysAddr_: f6c5a000 -> 00000000:007b8000
  ph data[2]=0:7b8000 (fff)
  get Phys(data[n=3+1000]=f6c5b000)
AtapiVirtToPhysAddr_: f6c5b000 -> 00000000:007c1000
  ph data[3]=0:7c1000 (fff)
  get Phys(data[n=4+1000]=f6c5c000)
AtapiVirtToPhysAddr_: f6c5c000 -> 00000000:007ca000
  ph data[4]=0:7ca000 (fff)
  get Phys(data[n=5+1000]=f6c5d000)
AtapiVirtToPhysAddr_: f6c5d000 -> 00000000:007cb000
  ph data[4]=0:7ca000 (1fff)
  get Phys(data[n=5+2000]=f6c5e000)
AtapiVirtToPhysAddr_: f6c5e000 -> 00000000:007cc000
  ph data[4]=0:7ca000 (2fff)
  get Phys(data[n=5+3000]=f6c5f000)
AtapiVirtToPhysAddr_: f6c5f000 -> 00000000:007cd000
  ph data[4]=0:7ca000 (3fff)
  get Phys(data[n=5+4000]=f6c60000)
AtapiVirtToPhysAddr_: f6c60000 -> 00000000:007ce000
  ph data[4]=0:7ca000 (4fff)
  get Phys(data[n=5+5000]=f6c61000)
AtapiVirtToPhysAddr_: f6c61000 -> 00000000:007d7000
  ph data[5]=0:7d7000 (fff)
  get Phys(data[n=6+1000]=f6c62000)
AtapiVirtToPhysAddr_: f6c62000 -> 00000000:007b0000
  ph data[6]=0:7b0000 (fff)
  get Phys(data[n=7+1000]=f6c63000)
AtapiVirtToPhysAddr_: f6c63000 -> 00000000:007b9000
  ph data[7]=0:7b9000 (fff)
  get Phys(data[n=8+1000]=f6c64000)
AtapiVirtToPhysAddr_: f6c64000 -> 00000000:007c2000
  ph data[8]=0:7c2000 (fff)
  get Phys(data[n=9+1000]=f6c65000)
AtapiVirtToPhysAddr_: f6c65000 -> 00000000:007c3000
  ph data[8]=0:7c2000 (1fff)
  get Phys(data[n=9+2000]=f6c66000)
AtapiVirtToPhysAddr_: f6c66000 -> 00000000:007c4000
  ph data[8]=0:7c2000 (2fff)
  get Phys(data[n=9+3000]=f6c67000)
AtapiVirtToPhysAddr_: f6c67000 -> 00000000:007c5000
  set TERM
  ph data[8]=0:7c2000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 10 request(s)!
AtapiStartIo: next Srb b5eed160
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eecb68, CDB 0xb5eecb98, AtaReq 0xb6779048, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=a
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb6779048
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f9309e, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f9309e, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f6c68000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f6c68000)
AtapiVirtToPhysAddr_: f6c68000 -> 00000000:007c6000
  ph data[0]=0:7c6000 (fff)
  get Phys(data[n=1+1000]=f6c69000)
AtapiVirtToPhysAddr_: f6c69000 -> 00000000:007cf000
  ph data[1]=0:7cf000 (fff)
  get Phys(data[n=2+1000]=f6c6a000)
AtapiVirtToPhysAddr_: f6c6a000 -> 00000000:007a8000
  ph data[2]=0:7a8000 (fff)
  get Phys(data[n=3+1000]=f6c6b000)
AtapiVirtToPhysAddr_: f6c6b000 -> 00000000:007b1000
  ph data[3]=0:7b1000 (fff)
  get Phys(data[n=4+1000]=f6c6c000)
AtapiVirtToPhysAddr_: f6c6c000 -> 00000000:007ba000
  ph data[4]=0:7ba000 (fff)
  get Phys(data[n=5+1000]=f6c6d000)
AtapiVirtToPhysAddr_: f6c6d000 -> 00000000:007bb000
  ph data[4]=0:7ba000 (1fff)
  get Phys(data[n=5+2000]=f6c6e000)
AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:007bc000
  ph data[4]=0:7ba000 (2fff)
  get Phys(data[n=5+3000]=f6c6f000)
AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:007bd000
  ph data[4]=0:7ba000 (3fff)
  get Phys(data[n=5+4000]=f6c70000)
AtapiVirtToPhysAddr_: f6c70000 -> 00000000:007be000
  ph data[4]=0:7ba000 (4fff)
  get Phys(data[n=5+5000]=f6c71000)
AtapiVirtToPhysAddr_: f6c71000 -> 00000000:007c7000
  ph data[5]=0:7c7000 (fff)
  get Phys(data[n=6+1000]=f6c72000)
AtapiVirtToPhysAddr_: f6c72000 -> 00000000:007a0000
  ph data[6]=0:7a0000 (fff)
  get Phys(data[n=7+1000]=f6c73000)
AtapiVirtToPhysAddr_: f6c73000 -> 00000000:007a9000
  ph data[7]=0:7a9000 (fff)
  get Phys(data[n=8+1000]=f6c74000)
AtapiVirtToPhysAddr_: f6c74000 -> 00000000:007b2000
  ph data[8]=0:7b2000 (fff)
  get Phys(data[n=9+1000]=f6c75000)
AtapiVirtToPhysAddr_: f6c75000 -> 00000000:007b3000
  ph data[8]=0:7b2000 (1fff)
  get Phys(data[n=9+2000]=f6c76000)
AtapiVirtToPhysAddr_: f6c76000 -> 00000000:007b4000
  ph data[8]=0:7b2000 (2fff)
  get Phys(data[n=9+3000]=f6c77000)
AtapiVirtToPhysAddr_: f6c77000 -> 00000000:007b5000
  set TERM
  ph data[8]=0:7b2000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 11 request(s)!
AtapiStartIo: next Srb b5eecb68
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eec988, CDB 0xb5eec9b8, AtaReq 0xb6777018, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=b
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb6777018
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f9311e, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f9311e, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f6c78000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f6c78000)
AtapiVirtToPhysAddr_: f6c78000 -> 00000000:007b6000
  ph data[0]=0:7b6000 (fff)
  get Phys(data[n=1+1000]=f6c79000)
AtapiVirtToPhysAddr_: f6c79000 -> 00000000:007bf000
  ph data[1]=0:7bf000 (fff)
  get Phys(data[n=2+1000]=f6c7a000)
AtapiVirtToPhysAddr_: f6c7a000 -> 00000000:00798000
  ph data[2]=0:798000 (fff)
  get Phys(data[n=3+1000]=f6c7b000)
AtapiVirtToPhysAddr_: f6c7b000 -> 00000000:007a1000
  ph data[3]=0:7a1000 (fff)
  get Phys(data[n=4+1000]=f6c7c000)
AtapiVirtToPhysAddr_: f6c7c000 -> 00000000:007aa000
  ph data[4]=0:7aa000 (fff)
  get Phys(data[n=5+1000]=f6c7d000)
AtapiVirtToPhysAddr_: f6c7d000 -> 00000000:007ab000
  ph data[4]=0:7aa000 (1fff)
  get Phys(data[n=5+2000]=f6c7e000)
AtapiVirtToPhysAddr_: f6c7e000 -> 00000000:007ac000
  ph data[4]=0:7aa000 (2fff)
  get Phys(data[n=5+3000]=f6c7f000)
AtapiVirtToPhysAddr_: f6c7f000 -> 00000000:007ad000
  ph data[4]=0:7aa000 (3fff)
  get Phys(data[n=5+4000]=f6c80000)
AtapiVirtToPhysAddr_: f6c80000 -> 00000000:007ae000
  ph data[4]=0:7aa000 (4fff)
  get Phys(data[n=5+5000]=f6c81000)
AtapiVirtToPhysAddr_: f6c81000 -> 00000000:007b7000
  ph data[5]=0:7b7000 (fff)
  get Phys(data[n=6+1000]=f6c82000)
AtapiVirtToPhysAddr_: f6c82000 -> 00000000:00790000
  ph data[6]=0:790000 (fff)
  get Phys(data[n=7+1000]=f6c83000)
AtapiVirtToPhysAddr_: f6c83000 -> 00000000:00799000
  ph data[7]=0:799000 (fff)
  get Phys(data[n=8+1000]=f6c84000)
AtapiVirtToPhysAddr_: f6c84000 -> 00000000:007a2000
  ph data[8]=0:7a2000 (fff)
  get Phys(data[n=9+1000]=f6c85000)
AtapiVirtToPhysAddr_: f6c85000 -> 00000000:007a3000
  ph data[8]=0:7a2000 (1fff)
  get Phys(data[n=9+2000]=f6c86000)
AtapiVirtToPhysAddr_: f6c86000 -> 00000000:007a4000
  ph data[8]=0:7a2000 (2fff)
  get Phys(data[n=9+3000]=f6c87000)
AtapiVirtToPhysAddr_: f6c87000 -> 00000000:007a5000
  set TERM
  ph data[8]=0:7a2000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 12 request(s)!
AtapiStartIo: next Srb b5eec988
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eec7a8, CDB 0xb5eec7d8, AtaReq 0xb6782120, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=c
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb6782120
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f9319e, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f9319e, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6782120: cmd aligned b6782200, d=80
  ahci_cmd_ptr 0xb6782200
AtapiDmaSetup: mode 0x0, data f6c88000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6782200)
AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200
  get Phys(data[0]=f6c88000)
AtapiVirtToPhysAddr_: f6c88000 -> 00000000:007a6000
  ph data[0]=0:7a6000 (fff)
  get Phys(data[n=1+1000]=f6c89000)
AtapiVirtToPhysAddr_: f6c89000 -> 00000000:007af000
  ph data[1]=0:7af000 (fff)
  get Phys(data[n=2+1000]=f6c8a000)
AtapiVirtToPhysAddr_: f6c8a000 -> 00000000:00788000
  ph data[2]=0:788000 (fff)
  get Phys(data[n=3+1000]=f6c8b000)
AtapiVirtToPhysAddr_: f6c8b000 -> 00000000:00791000
  ph data[3]=0:791000 (fff)
  get Phys(data[n=4+1000]=f6c8c000)
AtapiVirtToPhysAddr_: f6c8c000 -> 00000000:0079a000
  ph data[4]=0:79a000 (fff)
  get Phys(data[n=5+1000]=f6c8d000)
AtapiVirtToPhysAddr_: f6c8d000 -> 00000000:0079b000
  ph data[4]=0:79a000 (1fff)
  get Phys(data[n=5+2000]=f6c8e000)
AtapiVirtToPhysAddr_: f6c8e000 -> 00000000:0079c000
  ph data[4]=0:79a000 (2fff)
  get Phys(data[n=5+3000]=f6c8f000)
AtapiVirtToPhysAddr_: f6c8f000 -> 00000000:0079d000
  ph data[4]=0:79a000 (3fff)
  get Phys(data[n=5+4000]=f6c90000)
AtapiVirtToPhysAddr_: f6c90000 -> 00000000:0079e000
  ph data[4]=0:79a000 (4fff)
  get Phys(data[n=5+5000]=f6c91000)
AtapiVirtToPhysAddr_: f6c91000 -> 00000000:007a7000
  ph data[5]=0:7a7000 (fff)
  get Phys(data[n=6+1000]=f6c92000)
AtapiVirtToPhysAddr_: f6c92000 -> 00000000:00780000
  ph data[6]=0:780000 (fff)
  get Phys(data[n=7+1000]=f6c93000)
AtapiVirtToPhysAddr_: f6c93000 -> 00000000:00789000
  ph data[7]=0:789000 (fff)
  get Phys(data[n=8+1000]=f6c94000)
AtapiVirtToPhysAddr_: f6c94000 -> 00000000:00792000
  ph data[8]=0:792000 (fff)
  get Phys(data[n=9+1000]=f6c95000)
AtapiVirtToPhysAddr_: f6c95000 -> 00000000:00793000
  ph data[8]=0:792000 (1fff)
  get Phys(data[n=9+2000]=f6c96000)
AtapiVirtToPhysAddr_: f6c96000 -> 00000000:00794000
  ph data[8]=0:792000 (2fff)
  get Phys(data[n=9+3000]=f6c97000)
AtapiVirtToPhysAddr_: f6c97000 -> 00000000:00795000
  set TERM
  ph data[8]=0:792000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6782200, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 13 request(s)!
AtapiStartIo: next Srb b5eec7a8
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0xb5eed388
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6778030, SCmd 0x2a
UniataNeedQueueing: qd=c
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f9093c, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x9, flags 0x45, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0xb5ef2528
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6781108, SCmd 0x2a
UniataNeedQueueing: qd=b
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6781108
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f9083c, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108
  AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180)
  prd_length 0x9, flags 0x45, base 8e44180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0xb5ef24e0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677f0d8, SCmd 0x2a
UniataNeedQueueing: qd=a
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677f0d8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f908bc, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677f0d8
  AHCI AtaReq CMD 0xb677f180 (ph 0x8e42180)
  prd_length 0x9, flags 0x45, base 8e42180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0xb5eedcf0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eedcf0, CDB 0xb5eedd20, AtaReq 0xb677a060, SCmd 0x28
UniataNeedQueueing: qd=9
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fac960, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x1, flags 0x5, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eedcf0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eedcf0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eedcf0
AtapiInterrupt: NextRequest, srb=0xb5f0f138
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f0f138, CDB 0xb5f0f168, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: qd=8
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb67800f0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38facab0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0
  AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180)
  prd_length 0x1, flags 0x5, base 8e43180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f0f138
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f0f138, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f0f138
AtapiInterrupt: NextRequest, srb=0xb5f10448
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5f10448, CDB 0xb5f10478, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: qd=7
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704ae30
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38facb30, Count 0x50(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x1, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5f10448
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 5000, WordsLeft 5000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered a000, full size a000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5f10448, status 1
AtapiInterrupt: RequestComplete, srb 0xb5f10448
AtapiInterrupt: NextRequest, srb=0xb671e4a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb671e4a0, CDB 0xb671e4d0, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=6
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704ae30
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39719d40, Count 0x18(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x1, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b671e4a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eedcf0, CDB 0xb5eedd20, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=6
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704ac68
** Ide: Command AtaReq 0xb677b078
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fac490, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fac490, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:12843000
  ph data[0]=0:12843000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:1283c000
  set TERM
  ph data[1]=0:1283c000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 7 request(s)!
AtapiStartIo: next Srb b5eedcf0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1800, WordsLeft 1800
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 3000, full size 3000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb671e4a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb671e4a0
AtapiInterrupt: NextRequest, srb=0xb5eedcf0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eedcf0, CDB 0xb5eedd20, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: qd=6
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6fdae8c
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fac490, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x2, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eedcf0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eedcf0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eedcf0
AtapiInterrupt: NextRequest, srb=0xb5eec7a8
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eec7a8, CDB 0xb5eec7d8, AtaReq 0xb6782120, SCmd 0x2a
UniataNeedQueueing: qd=5
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb6782120
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f9319e, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120
  AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200)
  prd_length 0x9, flags 0x45, base 8e45200
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eec7a8
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eec7a8, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eec7a8
AtapiInterrupt: NextRequest, srb=0xb5eec988
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eec988, CDB 0xb5eec9b8, AtaReq 0xb6777018, SCmd 0x2a
UniataNeedQueueing: qd=4
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704ae30
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f9311e, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x9, flags 0x45, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eec988
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eec988, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eec988
AtapiInterrupt: NextRequest, srb=0xb5eecb68
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eecb68, CDB 0xb5eecb98, AtaReq 0xb6779048, SCmd 0x2a
UniataNeedQueueing: qd=3
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704adbc
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f9309e, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x9, flags 0x45, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eecb68
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eedcf0, CDB 0xb5eedd20, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704ac68
** Ide: Command AtaReq 0xb6777018
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fac960, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fac960, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:120e3000
  ph data[0]=0:120e3000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:120e4000
  set TERM
  ph data[0]=0:120e3000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b5eedcf0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eecb68, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eecb68
AtapiInterrupt: NextRequest, srb=0xb5eed160
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed160, CDB 0xb5eed190, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: qd=3
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74fef94
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f9301e, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x9, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed160
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed160, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed160
AtapiInterrupt: NextRequest, srb=0xb5eed1a8
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed1a8, CDB 0xb5eed1d8, AtaReq 0xb677c090, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74feff0
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f909bc, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x9, flags 0x45, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed1a8
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed1a8, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed1a8
AtapiInterrupt: NextRequest, srb=0xb5eedcf0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eedcf0, CDB 0xb5eedd20, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff4bc
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fac960, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eedcf0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eedcf0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eedcf0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eecb68, CDB 0xb5eecb98, AtaReq 0xb677c090, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb5eecb68
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5770
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f97f60, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f97f60, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6c58000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6c58000)
AtapiVirtToPhysAddr_: f6c58000 -> 00000000:af952000
  ph data[0]=0:af952000 (fff)
  get Phys(data[n=1+1000]=f6c59000)
AtapiVirtToPhysAddr_: f6c59000 -> 00000000:af953000
  ph data[0]=0:af952000 (1fff)
  get Phys(data[n=1+2000]=f6c5a000)
AtapiVirtToPhysAddr_: f6c5a000 -> 00000000:af954000
  ph data[0]=0:af952000 (2fff)
  get Phys(data[n=1+3000]=f6c5b000)
AtapiVirtToPhysAddr_: f6c5b000 -> 00000000:af955000
  ph data[0]=0:af952000 (3fff)
  get Phys(data[n=1+4000]=f6c5c000)
AtapiVirtToPhysAddr_: f6c5c000 -> 00000000:af95e000
  ph data[1]=0:af95e000 (fff)
  get Phys(data[n=2+1000]=f6c5d000)
AtapiVirtToPhysAddr_: f6c5d000 -> 00000000:af957000
  ph data[2]=0:af957000 (fff)
  get Phys(data[n=3+1000]=f6c5e000)
AtapiVirtToPhysAddr_: f6c5e000 -> 00000000:af930000
  ph data[3]=0:af930000 (fff)
  get Phys(data[n=4+1000]=f6c5f000)
AtapiVirtToPhysAddr_: f6c5f000 -> 00000000:af941000
  ph data[4]=0:af941000 (fff)
  get Phys(data[n=5+1000]=f6c60000)
AtapiVirtToPhysAddr_: f6c60000 -> 00000000:af94a000
  ph data[5]=0:af94a000 (fff)
  get Phys(data[n=6+1000]=f6c61000)
AtapiVirtToPhysAddr_: f6c61000 -> 00000000:af94b000
  ph data[5]=0:af94a000 (1fff)
  get Phys(data[n=6+2000]=f6c62000)
AtapiVirtToPhysAddr_: f6c62000 -> 00000000:af94c000
  ph data[5]=0:af94a000 (2fff)
  get Phys(data[n=6+3000]=f6c63000)
AtapiVirtToPhysAddr_: f6c63000 -> 00000000:af94d000
  ph data[5]=0:af94a000 (3fff)
  get Phys(data[n=6+4000]=f6c64000)
AtapiVirtToPhysAddr_: f6c64000 -> 00000000:af956000
  ph data[6]=0:af956000 (fff)
  get Phys(data[n=7+1000]=f6c65000)
AtapiVirtToPhysAddr_: f6c65000 -> 00000000:af94f000
  ph data[7]=0:af94f000 (fff)
  get Phys(data[n=8+1000]=f6c66000)
AtapiVirtToPhysAddr_: f6c66000 -> 00000000:af928000
  ph data[8]=0:af928000 (fff)
  get Phys(data[n=9+1000]=f6c67000)
AtapiVirtToPhysAddr_: f6c67000 -> 00000000:af939000
  set TERM
  ph data[9]=0:af939000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f97f60, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0xa, flags 0x45, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eecb68
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb6777018
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f97ff0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f97ff0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f6c68000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f6c68000)
AtapiVirtToPhysAddr_: f6c68000 -> 00000000:af942000
  ph data[0]=0:af942000 (fff)
  get Phys(data[n=1+1000]=f6c69000)
AtapiVirtToPhysAddr_: f6c69000 -> 00000000:af943000
  ph data[0]=0:af942000 (1fff)
  get Phys(data[n=1+2000]=f6c6a000)
AtapiVirtToPhysAddr_: f6c6a000 -> 00000000:af944000
  ph data[0]=0:af942000 (2fff)
  get Phys(data[n=1+3000]=f6c6b000)
AtapiVirtToPhysAddr_: f6c6b000 -> 00000000:af945000
  ph data[0]=0:af942000 (3fff)
  get Phys(data[n=1+4000]=f6c6c000)
AtapiVirtToPhysAddr_: f6c6c000 -> 00000000:af94e000
  ph data[1]=0:af94e000 (fff)
  get Phys(data[n=2+1000]=f6c6d000)
AtapiVirtToPhysAddr_: f6c6d000 -> 00000000:af947000
  ph data[2]=0:af947000 (fff)
  get Phys(data[n=3+1000]=f6c6e000)
AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:af920000
  ph data[3]=0:af920000 (fff)
  get Phys(data[n=4+1000]=f6c6f000)
AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:af931000
  ph data[4]=0:af931000 (fff)
  get Phys(data[n=5+1000]=f6c70000)
AtapiVirtToPhysAddr_: f6c70000 -> 00000000:af93a000
  ph data[5]=0:af93a000 (fff)
  get Phys(data[n=6+1000]=f6c71000)
AtapiVirtToPhysAddr_: f6c71000 -> 00000000:af93b000
  ph data[5]=0:af93a000 (1fff)
  get Phys(data[n=6+2000]=f6c72000)
AtapiVirtToPhysAddr_: f6c72000 -> 00000000:af93c000
  ph data[5]=0:af93a000 (2fff)
  get Phys(data[n=6+3000]=f6c73000)
AtapiVirtToPhysAddr_: f6c73000 -> 00000000:af93d000
  ph data[5]=0:af93a000 (3fff)
  get Phys(data[n=6+4000]=f6c74000)
AtapiVirtToPhysAddr_: f6c74000 -> 00000000:af946000
  ph data[6]=0:af946000 (fff)
  get Phys(data[n=7+1000]=f6c75000)
AtapiVirtToPhysAddr_: f6c75000 -> 00000000:af93f000
  ph data[7]=0:af93f000 (fff)
  get Phys(data[n=8+1000]=f6c76000)
AtapiVirtToPhysAddr_: f6c76000 -> 00000000:af918000
  ph data[8]=0:af918000 (fff)
  get Phys(data[n=9+1000]=f6c77000)
AtapiVirtToPhysAddr_: f6c77000 -> 00000000:af929000
  set TERM
  ph data[9]=0:af929000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f98070, OrigWordsRequested 0x2000, DevSize 0x20
IdeReadWrite (REQ): Starting sector is 38f98070, Number of WORDS 0x2000, DevSize 0x20
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6c78000, count 4000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6c78000)
AtapiVirtToPhysAddr_: f6c78000 -> 00000000:af932000
  ph data[0]=0:af932000 (fff)
  get Phys(data[n=1+1000]=f6c79000)
AtapiVirtToPhysAddr_: f6c79000 -> 00000000:af933000
  ph data[0]=0:af932000 (1fff)
  get Phys(data[n=1+2000]=f6c7a000)
AtapiVirtToPhysAddr_: f6c7a000 -> 00000000:af934000
  ph data[0]=0:af932000 (2fff)
  get Phys(data[n=1+3000]=f6c7b000)
AtapiVirtToPhysAddr_: f6c7b000 -> 00000000:af935000
  set TERM
  ph data[0]=0:af932000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eecb68, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eecb68
AtapiInterrupt: NextRequest, srb=0xb5ef2528
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f97ff0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0xa, flags 0x45, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eecb68, CDB 0xb5eecb98, AtaReq 0xb677c090, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f980a0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f980a0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6c7c000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6c7c000)
AtapiVirtToPhysAddr_: f6c7c000 -> 00000000:af93e000
  ph data[0]=0:af93e000 (fff)
  get Phys(data[n=1+1000]=f6c7d000)
AtapiVirtToPhysAddr_: f6c7d000 -> 00000000:af937000
  ph data[1]=0:af937000 (fff)
  get Phys(data[n=2+1000]=f6c7e000)
AtapiVirtToPhysAddr_: f6c7e000 -> 00000000:af910000
  ph data[2]=0:af910000 (fff)
  get Phys(data[n=3+1000]=f6c7f000)
AtapiVirtToPhysAddr_: f6c7f000 -> 00000000:af921000
  ph data[3]=0:af921000 (fff)
  get Phys(data[n=4+1000]=f6c80000)
AtapiVirtToPhysAddr_: f6c80000 -> 00000000:af92a000
  ph data[4]=0:af92a000 (fff)
  get Phys(data[n=5+1000]=f6c81000)
AtapiVirtToPhysAddr_: f6c81000 -> 00000000:af92b000
  ph data[4]=0:af92a000 (1fff)
  get Phys(data[n=5+2000]=f6c82000)
AtapiVirtToPhysAddr_: f6c82000 -> 00000000:af92c000
  ph data[4]=0:af92a000 (2fff)
  get Phys(data[n=5+3000]=f6c83000)
AtapiVirtToPhysAddr_: f6c83000 -> 00000000:af92d000
  ph data[4]=0:af92a000 (3fff)
  get Phys(data[n=5+4000]=f6c84000)
AtapiVirtToPhysAddr_: f6c84000 -> 00000000:af936000
  ph data[5]=0:af936000 (fff)
  get Phys(data[n=6+1000]=f6c85000)
AtapiVirtToPhysAddr_: f6c85000 -> 00000000:af92f000
  ph data[6]=0:af92f000 (fff)
  get Phys(data[n=7+1000]=f6c86000)
AtapiVirtToPhysAddr_: f6c86000 -> 00000000:af908000
  ph data[7]=0:af908000 (fff)
  get Phys(data[n=8+1000]=f6c87000)
AtapiVirtToPhysAddr_: f6c87000 -> 00000000:af919000
  ph data[8]=0:af919000 (fff)
  get Phys(data[n=9+1000]=f6c88000)
AtapiVirtToPhysAddr_: f6c88000 -> 00000000:af922000
  ph data[9]=0:af922000 (fff)
  get Phys(data[n=10+1000]=f6c89000)
AtapiVirtToPhysAddr_: f6c89000 -> 00000000:af923000
  ph data[9]=0:af922000 (1fff)
  get Phys(data[n=10+2000]=f6c8a000)
AtapiVirtToPhysAddr_: f6c8a000 -> 00000000:af924000
  ph data[9]=0:af922000 (2fff)
  get Phys(data[n=10+3000]=f6c8b000)
AtapiVirtToPhysAddr_: f6c8b000 -> 00000000:af925000
  set TERM
  ph data[9]=0:af922000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b5eecb68
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0xb5eed388
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f98070, Count 0x20(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 2000, WordsLeft 2000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 4000, full size 4000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0xb5eecb68
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eecb68, CDB 0xb5eecb98, AtaReq 0xb677c090, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdc44
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f980a0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0xa, flags 0x45, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eecb68
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f98120, OrigWordsRequested 0x2000, DevSize 0x20
IdeReadWrite (REQ): Starting sector is 38f98120, Number of WORDS 0x2000, DevSize 0x20
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6c8c000, count 4000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6c8c000)
AtapiVirtToPhysAddr_: f6c8c000 -> 00000000:af92e000
  ph data[0]=0:af92e000 (fff)
  get Phys(data[n=1+1000]=f6c8d000)
AtapiVirtToPhysAddr_: f6c8d000 -> 00000000:af927000
  ph data[1]=0:af927000 (fff)
  get Phys(data[n=2+1000]=f6c8e000)
AtapiVirtToPhysAddr_: f6c8e000 -> 00000000:af900000
  ph data[2]=0:af900000 (fff)
  get Phys(data[n=3+1000]=f6c8f000)
AtapiVirtToPhysAddr_: f6c8f000 -> 00000000:af911000
  set TERM
  ph data[3]=0:af911000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5770
** Ide: Command AtaReq 0xb6777018
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f98150, OrigWordsRequested 0x4000, DevSize 0x40
IdeReadWrite (REQ): Starting sector is 38f98150, Number of WORDS 0x4000, DevSize 0x40
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f6c90000, count 8000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f6c90000)
AtapiVirtToPhysAddr_: f6c90000 -> 00000000:af91a000
  ph data[0]=0:af91a000 (fff)
  get Phys(data[n=1+1000]=f6c91000)
AtapiVirtToPhysAddr_: f6c91000 -> 00000000:af91b000
  ph data[0]=0:af91a000 (1fff)
  get Phys(data[n=1+2000]=f6c92000)
AtapiVirtToPhysAddr_: f6c92000 -> 00000000:af91c000
  ph data[0]=0:af91a000 (2fff)
  get Phys(data[n=1+3000]=f6c93000)
AtapiVirtToPhysAddr_: f6c93000 -> 00000000:af91d000
  ph data[0]=0:af91a000 (3fff)
  get Phys(data[n=1+4000]=f6c94000)
AtapiVirtToPhysAddr_: f6c94000 -> 00000000:af926000
  ph data[1]=0:af926000 (fff)
  get Phys(data[n=2+1000]=f6c95000)
AtapiVirtToPhysAddr_: f6c95000 -> 00000000:af91f000
  ph data[2]=0:af91f000 (fff)
  get Phys(data[n=3+1000]=f6c96000)
AtapiVirtToPhysAddr_: f6c96000 -> 00000000:af8f8000
  ph data[3]=0:af8f8000 (fff)
  get Phys(data[n=4+1000]=f6c97000)
AtapiVirtToPhysAddr_: f6c97000 -> 00000000:af909000
  set TERM
  ph data[4]=0:af909000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eecb68, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eecb68
AtapiInterrupt: NextRequest, srb=0xb5eed388
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff454
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f98120, Count 0x20(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 2000, WordsLeft 2000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 4000, full size 4000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0xb5ef2528
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff378
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f98150, Count 0x40(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x5, flags 0x45, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 4000, WordsLeft 4000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 8000, full size 8000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb5ef2528
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f98190, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f98190, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f6c58000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f6c58000)
AtapiVirtToPhysAddr_: f6c58000 -> 00000000:af912000
  ph data[0]=0:af912000 (fff)
  get Phys(data[n=1+1000]=f6c59000)
AtapiVirtToPhysAddr_: f6c59000 -> 00000000:af913000
  ph data[0]=0:af912000 (1fff)
  get Phys(data[n=1+2000]=f6c5a000)
AtapiVirtToPhysAddr_: f6c5a000 -> 00000000:af914000
  ph data[0]=0:af912000 (2fff)
  get Phys(data[n=1+3000]=f6c5b000)
AtapiVirtToPhysAddr_: f6c5b000 -> 00000000:af915000
  ph data[0]=0:af912000 (3fff)
  get Phys(data[n=1+4000]=f6c5c000)
AtapiVirtToPhysAddr_: f6c5c000 -> 00000000:af91e000
  ph data[1]=0:af91e000 (fff)
  get Phys(data[n=2+1000]=f6c5d000)
AtapiVirtToPhysAddr_: f6c5d000 -> 00000000:af917000
  ph data[2]=0:af917000 (fff)
  get Phys(data[n=3+1000]=f6c5e000)
AtapiVirtToPhysAddr_: f6c5e000 -> 00000000:af8f0000
  ph data[3]=0:af8f0000 (fff)
  get Phys(data[n=4+1000]=f6c5f000)
AtapiVirtToPhysAddr_: f6c5f000 -> 00000000:af901000
  ph data[4]=0:af901000 (fff)
  get Phys(data[n=5+1000]=f6c60000)
AtapiVirtToPhysAddr_: f6c60000 -> 00000000:af90a000
  ph data[5]=0:af90a000 (fff)
  get Phys(data[n=6+1000]=f6c61000)
AtapiVirtToPhysAddr_: f6c61000 -> 00000000:af90b000
  ph data[5]=0:af90a000 (1fff)
  get Phys(data[n=6+2000]=f6c62000)
AtapiVirtToPhysAddr_: f6c62000 -> 00000000:af90c000
  ph data[5]=0:af90a000 (2fff)
  get Phys(data[n=6+3000]=f6c63000)
AtapiVirtToPhysAddr_: f6c63000 -> 00000000:af90d000
  ph data[5]=0:af90a000 (3fff)
  get Phys(data[n=6+4000]=f6c64000)
AtapiVirtToPhysAddr_: f6c64000 -> 00000000:af916000
  ph data[6]=0:af916000 (fff)
  get Phys(data[n=7+1000]=f6c65000)
AtapiVirtToPhysAddr_: f6c65000 -> 00000000:af90f000
  ph data[7]=0:af90f000 (fff)
  get Phys(data[n=8+1000]=f6c66000)
AtapiVirtToPhysAddr_: f6c66000 -> 00000000:af8e8000
  ph data[8]=0:af8e8000 (fff)
  get Phys(data[n=9+1000]=f6c67000)
AtapiVirtToPhysAddr_: f6c67000 -> 00000000:af8f9000
  set TERM
  ph data[9]=0:af8f9000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f98190, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0xa, flags 0x45, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f98210, OrigWordsRequested 0x4000, DevSize 0x40
IdeReadWrite (REQ): Starting sector is 38f98210, Number of WORDS 0x4000, DevSize 0x40
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6c68000, count 8000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6c68000)
AtapiVirtToPhysAddr_: f6c68000 -> 00000000:af902000
  ph data[0]=0:af902000 (fff)
  get Phys(data[n=1+1000]=f6c69000)
AtapiVirtToPhysAddr_: f6c69000 -> 00000000:af903000
  ph data[0]=0:af902000 (1fff)
  get Phys(data[n=1+2000]=f6c6a000)
AtapiVirtToPhysAddr_: f6c6a000 -> 00000000:af904000
  ph data[0]=0:af902000 (2fff)
  get Phys(data[n=1+3000]=f6c6b000)
AtapiVirtToPhysAddr_: f6c6b000 -> 00000000:af905000
  ph data[0]=0:af902000 (3fff)
  get Phys(data[n=1+4000]=f6c6c000)
AtapiVirtToPhysAddr_: f6c6c000 -> 00000000:af90e000
  ph data[1]=0:af90e000 (fff)
  get Phys(data[n=2+1000]=f6c6d000)
AtapiVirtToPhysAddr_: f6c6d000 -> 00000000:af907000
  ph data[2]=0:af907000 (fff)
  get Phys(data[n=3+1000]=f6c6e000)
AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:af8e0000
  ph data[3]=0:af8e0000 (fff)
  get Phys(data[n=4+1000]=f6c6f000)
AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:af8f1000
  set TERM
  ph data[4]=0:af8f1000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eecb68, CDB 0xb5eecb98, AtaReq 0xb677c090, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f98260, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f98260, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6c70000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6c70000)
AtapiVirtToPhysAddr_: f6c70000 -> 00000000:af8fa000
  ph data[0]=0:af8fa000 (fff)
  get Phys(data[n=1+1000]=f6c71000)
AtapiVirtToPhysAddr_: f6c71000 -> 00000000:af8fb000
  ph data[0]=0:af8fa000 (1fff)
  get Phys(data[n=1+2000]=f6c72000)
AtapiVirtToPhysAddr_: f6c72000 -> 00000000:af8fc000
  ph data[0]=0:af8fa000 (2fff)
  get Phys(data[n=1+3000]=f6c73000)
AtapiVirtToPhysAddr_: f6c73000 -> 00000000:af8fd000
  ph data[0]=0:af8fa000 (3fff)
  get Phys(data[n=1+4000]=f6c74000)
AtapiVirtToPhysAddr_: f6c74000 -> 00000000:af906000
  ph data[1]=0:af906000 (fff)
  get Phys(data[n=2+1000]=f6c75000)
AtapiVirtToPhysAddr_: f6c75000 -> 00000000:af8ff000
  ph data[2]=0:af8ff000 (fff)
  get Phys(data[n=3+1000]=f6c76000)
AtapiVirtToPhysAddr_: f6c76000 -> 00000000:af8d8000
  ph data[3]=0:af8d8000 (fff)
  get Phys(data[n=4+1000]=f6c77000)
AtapiVirtToPhysAddr_: f6c77000 -> 00000000:af8e9000
  ph data[4]=0:af8e9000 (fff)
  get Phys(data[n=5+1000]=f6c78000)
AtapiVirtToPhysAddr_: f6c78000 -> 00000000:af8f2000
  ph data[5]=0:af8f2000 (fff)
  get Phys(data[n=6+1000]=f6c79000)
AtapiVirtToPhysAddr_: f6c79000 -> 00000000:af8f3000
  ph data[5]=0:af8f2000 (1fff)
  get Phys(data[n=6+2000]=f6c7a000)
AtapiVirtToPhysAddr_: f6c7a000 -> 00000000:af8f4000
  ph data[5]=0:af8f2000 (2fff)
  get Phys(data[n=6+3000]=f6c7b000)
AtapiVirtToPhysAddr_: f6c7b000 -> 00000000:af8f5000
  ph data[5]=0:af8f2000 (3fff)
  get Phys(data[n=6+4000]=f6c7c000)
AtapiVirtToPhysAddr_: f6c7c000 -> 00000000:af8fe000
  ph data[6]=0:af8fe000 (fff)
  get Phys(data[n=7+1000]=f6c7d000)
AtapiVirtToPhysAddr_: f6c7d000 -> 00000000:af8f7000
  ph data[7]=0:af8f7000 (fff)
  get Phys(data[n=8+1000]=f6c7e000)
AtapiVirtToPhysAddr_: f6c7e000 -> 00000000:af8d0000
  ph data[8]=0:af8d0000 (fff)
  get Phys(data[n=9+1000]=f6c7f000)
AtapiVirtToPhysAddr_: f6c7f000 -> 00000000:af8e1000
  set TERM
  ph data[9]=0:af8e1000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b5eecb68
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0xb5eed388
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f98210, Count 0x40(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x5, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb6777018
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f982e0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f982e0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f6c80000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f6c80000)
AtapiVirtToPhysAddr_: f6c80000 -> 00000000:af8ea000
  ph data[0]=0:af8ea000 (fff)
  get Phys(data[n=1+1000]=f6c81000)
AtapiVirtToPhysAddr_: f6c81000 -> 00000000:af8eb000
  ph data[0]=0:af8ea000 (1fff)
  get Phys(data[n=1+2000]=f6c82000)
AtapiVirtToPhysAddr_: f6c82000 -> 00000000:af8ec000
  ph data[0]=0:af8ea000 (2fff)
  get Phys(data[n=1+3000]=f6c83000)
AtapiVirtToPhysAddr_: f6c83000 -> 00000000:af8ed000
  ph data[0]=0:af8ea000 (3fff)
  get Phys(data[n=1+4000]=f6c84000)
AtapiVirtToPhysAddr_: f6c84000 -> 00000000:af8f6000
  ph data[1]=0:af8f6000 (fff)
  get Phys(data[n=2+1000]=f6c85000)
AtapiVirtToPhysAddr_: f6c85000 -> 00000000:af8ef000
  ph data[2]=0:af8ef000 (fff)
  get Phys(data[n=3+1000]=f6c86000)
AtapiVirtToPhysAddr_: f6c86000 -> 00000000:af8c8000
  ph data[3]=0:af8c8000 (fff)
  get Phys(data[n=4+1000]=f6c87000)
AtapiVirtToPhysAddr_: f6c87000 -> 00000000:af8d9000
  ph data[4]=0:af8d9000 (fff)
  get Phys(data[n=5+1000]=f6c88000)
AtapiVirtToPhysAddr_: f6c88000 -> 00000000:af8e2000
  ph data[5]=0:af8e2000 (fff)
  get Phys(data[n=6+1000]=f6c89000)
AtapiVirtToPhysAddr_: f6c89000 -> 00000000:af8e3000
  ph data[5]=0:af8e2000 (1fff)
  get Phys(data[n=6+2000]=f6c8a000)
AtapiVirtToPhysAddr_: f6c8a000 -> 00000000:af8e4000
  ph data[5]=0:af8e2000 (2fff)
  get Phys(data[n=6+3000]=f6c8b000)
AtapiVirtToPhysAddr_: f6c8b000 -> 00000000:af8e5000
  ph data[5]=0:af8e2000 (3fff)
  get Phys(data[n=6+4000]=f6c8c000)
AtapiVirtToPhysAddr_: f6c8c000 -> 00000000:af8ee000
  ph data[6]=0:af8ee000 (fff)
  get Phys(data[n=7+1000]=f6c8d000)
AtapiVirtToPhysAddr_: f6c8d000 -> 00000000:af8e7000
  ph data[7]=0:af8e7000 (fff)
  get Phys(data[n=8+1000]=f6c8e000)
AtapiVirtToPhysAddr_: f6c8e000 -> 00000000:af8c0000
  ph data[8]=0:af8c0000 (fff)
  get Phys(data[n=9+1000]=f6c8f000)
AtapiVirtToPhysAddr_: f6c8f000 -> 00000000:af8d1000
  set TERM
  ph data[9]=0:af8d1000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 4000, WordsLeft 4000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 8000, full size 8000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0xb5eecb68
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eecb68, CDB 0xb5eecb98, AtaReq 0xb677c090, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f98260, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0xa, flags 0x45, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eecb68
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5770
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f98370, OrigWordsRequested 0x4000, DevSize 0x40
IdeReadWrite (REQ): Starting sector is 38f98370, Number of WORDS 0x4000, DevSize 0x40
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6c90000, count 8000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6c90000)
AtapiVirtToPhysAddr_: f6c90000 -> 00000000:af8da000
  ph data[0]=0:af8da000 (fff)
  get Phys(data[n=1+1000]=f6c91000)
AtapiVirtToPhysAddr_: f6c91000 -> 00000000:af8db000
  ph data[0]=0:af8da000 (1fff)
  get Phys(data[n=1+2000]=f6c92000)
AtapiVirtToPhysAddr_: f6c92000 -> 00000000:af8dc000
  ph data[0]=0:af8da000 (2fff)
  get Phys(data[n=1+3000]=f6c93000)
AtapiVirtToPhysAddr_: f6c93000 -> 00000000:af8dd000
  ph data[0]=0:af8da000 (3fff)
  get Phys(data[n=1+4000]=f6c94000)
AtapiVirtToPhysAddr_: f6c94000 -> 00000000:af8e6000
  ph data[1]=0:af8e6000 (fff)
  get Phys(data[n=2+1000]=f6c95000)
AtapiVirtToPhysAddr_: f6c95000 -> 00000000:af8df000
  ph data[2]=0:af8df000 (fff)
  get Phys(data[n=3+1000]=f6c96000)
AtapiVirtToPhysAddr_: f6c96000 -> 00000000:af8b8000
  ph data[3]=0:af8b8000 (fff)
  get Phys(data[n=4+1000]=f6c97000)
AtapiVirtToPhysAddr_: f6c97000 -> 00000000:af8c9000
  set TERM
  ph data[4]=0:af8c9000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eecb68, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eecb68
AtapiInterrupt: NextRequest, srb=0xb5ef2528
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f982e0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0xa, flags 0x45, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0xb5eed388
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff474
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f98370, Count 0x40(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x5, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
(ntoskrnl/config/cmcheck.c:25) CmCheckRegistry(0xB5EEE008, 0) is UNIMPLEMENTED!
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 4000, WordsLeft 4000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 8000, full size 8000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb5eed388
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5770
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f983b0, OrigWordsRequested 0x6000, DevSize 0x60
IdeReadWrite (REQ): Starting sector is 38f983b0, Number of WORDS 0x6000, DevSize 0x60
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6c58000, count c000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6c58000)
AtapiVirtToPhysAddr_: f6c58000 -> 00000000:af8d2000
  ph data[0]=0:af8d2000 (fff)
  get Phys(data[n=1+1000]=f6c59000)
AtapiVirtToPhysAddr_: f6c59000 -> 00000000:af8d3000
  ph data[0]=0:af8d2000 (1fff)
  get Phys(data[n=1+2000]=f6c5a000)
AtapiVirtToPhysAddr_: f6c5a000 -> 00000000:af8d4000
  ph data[0]=0:af8d2000 (2fff)
  get Phys(data[n=1+3000]=f6c5b000)
AtapiVirtToPhysAddr_: f6c5b000 -> 00000000:af8d5000
  ph data[0]=0:af8d2000 (3fff)
  get Phys(data[n=1+4000]=f6c5c000)
AtapiVirtToPhysAddr_: f6c5c000 -> 00000000:af8de000
  ph data[1]=0:af8de000 (fff)
  get Phys(data[n=2+1000]=f6c5d000)
AtapiVirtToPhysAddr_: f6c5d000 -> 00000000:af8d7000
  ph data[2]=0:af8d7000 (fff)
  get Phys(data[n=3+1000]=f6c5e000)
AtapiVirtToPhysAddr_: f6c5e000 -> 00000000:af8b0000
  ph data[3]=0:af8b0000 (fff)
  get Phys(data[n=4+1000]=f6c5f000)
AtapiVirtToPhysAddr_: f6c5f000 -> 00000000:af8c1000
  ph data[4]=0:af8c1000 (fff)
  get Phys(data[n=5+1000]=f6c60000)
AtapiVirtToPhysAddr_: f6c60000 -> 00000000:af8ca000
  ph data[5]=0:af8ca000 (fff)
  get Phys(data[n=6+1000]=f6c61000)
AtapiVirtToPhysAddr_: f6c61000 -> 00000000:af8cb000
  ph data[5]=0:af8ca000 (1fff)
  get Phys(data[n=6+2000]=f6c62000)
AtapiVirtToPhysAddr_: f6c62000 -> 00000000:af8cc000
  ph data[5]=0:af8ca000 (2fff)
  get Phys(data[n=6+3000]=f6c63000)
AtapiVirtToPhysAddr_: f6c63000 -> 00000000:af8cd000
  set TERM
  ph data[5]=0:af8ca000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f983b0, Count 0x60(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x6, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb6777018
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f98420, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f98420, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f6c64000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f6c64000)
AtapiVirtToPhysAddr_: f6c64000 -> 00000000:af8d6000
  ph data[0]=0:af8d6000 (fff)
  get Phys(data[n=1+1000]=f6c65000)
AtapiVirtToPhysAddr_: f6c65000 -> 00000000:af8cf000
  ph data[1]=0:af8cf000 (fff)
  get Phys(data[n=2+1000]=f6c66000)
AtapiVirtToPhysAddr_: f6c66000 -> 00000000:af8a8000
  ph data[2]=0:af8a8000 (fff)
  get Phys(data[n=3+1000]=f6c67000)
AtapiVirtToPhysAddr_: f6c67000 -> 00000000:af8b9000
  ph data[3]=0:af8b9000 (fff)
  get Phys(data[n=4+1000]=f6c68000)
AtapiVirtToPhysAddr_: f6c68000 -> 00000000:af8c2000
  ph data[4]=0:af8c2000 (fff)
  get Phys(data[n=5+1000]=f6c69000)
AtapiVirtToPhysAddr_: f6c69000 -> 00000000:af8c3000
  ph data[4]=0:af8c2000 (1fff)
  get Phys(data[n=5+2000]=f6c6a000)
AtapiVirtToPhysAddr_: f6c6a000 -> 00000000:af8c4000
  ph data[4]=0:af8c2000 (2fff)
  get Phys(data[n=5+3000]=f6c6b000)
AtapiVirtToPhysAddr_: f6c6b000 -> 00000000:af8c5000
  ph data[4]=0:af8c2000 (3fff)
  get Phys(data[n=5+4000]=f6c6c000)
AtapiVirtToPhysAddr_: f6c6c000 -> 00000000:af8ce000
  ph data[5]=0:af8ce000 (fff)
  get Phys(data[n=6+1000]=f6c6d000)
AtapiVirtToPhysAddr_: f6c6d000 -> 00000000:af8c7000
  ph data[6]=0:af8c7000 (fff)
  get Phys(data[n=7+1000]=f6c6e000)
AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:af8a0000
  ph data[7]=0:af8a0000 (fff)
  get Phys(data[n=8+1000]=f6c6f000)
AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:af8b1000
  ph data[8]=0:af8b1000 (fff)
  get Phys(data[n=9+1000]=f6c70000)
AtapiVirtToPhysAddr_: f6c70000 -> 00000000:af8ba000
  ph data[9]=0:af8ba000 (fff)
  get Phys(data[n=10+1000]=f6c71000)
AtapiVirtToPhysAddr_: f6c71000 -> 00000000:af8bb000
  ph data[9]=0:af8ba000 (1fff)
  get Phys(data[n=10+2000]=f6c72000)
AtapiVirtToPhysAddr_: f6c72000 -> 00000000:af8bc000
  ph data[9]=0:af8ba000 (2fff)
  get Phys(data[n=10+3000]=f6c73000)
AtapiVirtToPhysAddr_: f6c73000 -> 00000000:af8bd000
  set TERM
  ph data[9]=0:af8ba000 (3fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 6000, WordsLeft 6000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered c000, full size c000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0xb5ef2528
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdb54
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f98420, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0xa, flags 0x45, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f984a0, OrigWordsRequested 0x6000, DevSize 0x60
IdeReadWrite (REQ): Starting sector is 38f984a0, Number of WORDS 0x6000, DevSize 0x60
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6c74000, count c000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6c74000)
AtapiVirtToPhysAddr_: f6c74000 -> 00000000:af8c6000
  ph data[0]=0:af8c6000 (fff)
  get Phys(data[n=1+1000]=f6c75000)
AtapiVirtToPhysAddr_: f6c75000 -> 00000000:af8bf000
  ph data[1]=0:af8bf000 (fff)
  get Phys(data[n=2+1000]=f6c76000)
AtapiVirtToPhysAddr_: f6c76000 -> 00000000:af898000
  ph data[2]=0:af898000 (fff)
  get Phys(data[n=3+1000]=f6c77000)
AtapiVirtToPhysAddr_: f6c77000 -> 00000000:af8a9000
  ph data[3]=0:af8a9000 (fff)
  get Phys(data[n=4+1000]=f6c78000)
AtapiVirtToPhysAddr_: f6c78000 -> 00000000:af8b2000
  ph data[4]=0:af8b2000 (fff)
  get Phys(data[n=5+1000]=f6c79000)
AtapiVirtToPhysAddr_: f6c79000 -> 00000000:af8b3000
  ph data[4]=0:af8b2000 (1fff)
  get Phys(data[n=5+2000]=f6c7a000)
AtapiVirtToPhysAddr_: f6c7a000 -> 00000000:af8b4000
  ph data[4]=0:af8b2000 (2fff)
  get Phys(data[n=5+3000]=f6c7b000)
AtapiVirtToPhysAddr_: f6c7b000 -> 00000000:af8b5000
  ph data[4]=0:af8b2000 (3fff)
  get Phys(data[n=5+4000]=f6c7c000)
AtapiVirtToPhysAddr_: f6c7c000 -> 00000000:af8be000
  ph data[5]=0:af8be000 (fff)
  get Phys(data[n=6+1000]=f6c7d000)
AtapiVirtToPhysAddr_: f6c7d000 -> 00000000:af8b7000
  ph data[6]=0:af8b7000 (fff)
  get Phys(data[n=7+1000]=f6c7e000)
AtapiVirtToPhysAddr_: f6c7e000 -> 00000000:af890000
  ph data[7]=0:af890000 (fff)
  get Phys(data[n=8+1000]=f6c7f000)
AtapiVirtToPhysAddr_: f6c7f000 -> 00000000:af8a1000
  set TERM
  ph data[8]=0:af8a1000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0xb5eed388
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b55f4
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f984a0, Count 0x60(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x9, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb6777018
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f98510, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f98510, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f6c80000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f6c80000)
AtapiVirtToPhysAddr_: f6c80000 -> 00000000:af8aa000
  ph data[0]=0:af8aa000 (fff)
  get Phys(data[n=1+1000]=f6c81000)
AtapiVirtToPhysAddr_: f6c81000 -> 00000000:af8ab000
  ph data[0]=0:af8aa000 (1fff)
  get Phys(data[n=1+2000]=f6c82000)
AtapiVirtToPhysAddr_: f6c82000 -> 00000000:af8ac000
  ph data[0]=0:af8aa000 (2fff)
  get Phys(data[n=1+3000]=f6c83000)
AtapiVirtToPhysAddr_: f6c83000 -> 00000000:af8ad000
  ph data[0]=0:af8aa000 (3fff)
  get Phys(data[n=1+4000]=f6c84000)
AtapiVirtToPhysAddr_: f6c84000 -> 00000000:af8b6000
  ph data[1]=0:af8b6000 (fff)
  get Phys(data[n=2+1000]=f6c85000)
AtapiVirtToPhysAddr_: f6c85000 -> 00000000:af8af000
  ph data[2]=0:af8af000 (fff)
  get Phys(data[n=3+1000]=f6c86000)
AtapiVirtToPhysAddr_: f6c86000 -> 00000000:af888000
  ph data[3]=0:af888000 (fff)
  get Phys(data[n=4+1000]=f6c87000)
AtapiVirtToPhysAddr_: f6c87000 -> 00000000:af899000
  ph data[4]=0:af899000 (fff)
  get Phys(data[n=5+1000]=f6c88000)
AtapiVirtToPhysAddr_: f6c88000 -> 00000000:af8a2000
  ph data[5]=0:af8a2000 (fff)
  get Phys(data[n=6+1000]=f6c89000)
AtapiVirtToPhysAddr_: f6c89000 -> 00000000:af8a3000
  ph data[5]=0:af8a2000 (1fff)
  get Phys(data[n=6+2000]=f6c8a000)
AtapiVirtToPhysAddr_: f6c8a000 -> 00000000:af8a4000
  ph data[5]=0:af8a2000 (2fff)
  get Phys(data[n=6+3000]=f6c8b000)
AtapiVirtToPhysAddr_: f6c8b000 -> 00000000:af8a5000
  ph data[5]=0:af8a2000 (3fff)
  get Phys(data[n=6+4000]=f6c8c000)
AtapiVirtToPhysAddr_: f6c8c000 -> 00000000:af8ae000
  ph data[6]=0:af8ae000 (fff)
  get Phys(data[n=7+1000]=f6c8d000)
AtapiVirtToPhysAddr_: f6c8d000 -> 00000000:af8a7000
  ph data[7]=0:af8a7000 (fff)
  get Phys(data[n=8+1000]=f6c8e000)
AtapiVirtToPhysAddr_: f6c8e000 -> 00000000:af880000
  ph data[8]=0:af880000 (fff)
  get Phys(data[n=9+1000]=f6c8f000)
AtapiVirtToPhysAddr_: f6c8f000 -> 00000000:af891000
  set TERM
  ph data[9]=0:af891000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 6000, WordsLeft 6000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered c000, full size c000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0xb5ef2528
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b55f4
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f98510, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0xa, flags 0x45, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f98590, OrigWordsRequested 0x4000, DevSize 0x40
IdeReadWrite (REQ): Starting sector is 38f98590, Number of WORDS 0x4000, DevSize 0x40
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6c90000, count 8000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6c90000)
AtapiVirtToPhysAddr_: f6c90000 -> 00000000:af89a000
  ph data[0]=0:af89a000 (fff)
  get Phys(data[n=1+1000]=f6c91000)
AtapiVirtToPhysAddr_: f6c91000 -> 00000000:af89b000
  ph data[0]=0:af89a000 (1fff)
  get Phys(data[n=1+2000]=f6c92000)
AtapiVirtToPhysAddr_: f6c92000 -> 00000000:af89c000
  ph data[0]=0:af89a000 (2fff)
  get Phys(data[n=1+3000]=f6c93000)
AtapiVirtToPhysAddr_: f6c93000 -> 00000000:af89d000
  ph data[0]=0:af89a000 (3fff)
  get Phys(data[n=1+4000]=f6c94000)
AtapiVirtToPhysAddr_: f6c94000 -> 00000000:af8a6000
  ph data[1]=0:af8a6000 (fff)
  get Phys(data[n=2+1000]=f6c95000)
AtapiVirtToPhysAddr_: f6c95000 -> 00000000:af89f000
  ph data[2]=0:af89f000 (fff)
  get Phys(data[n=3+1000]=f6c96000)
AtapiVirtToPhysAddr_: f6c96000 -> 00000000:af878000
  ph data[3]=0:af878000 (fff)
  get Phys(data[n=4+1000]=f6c97000)
AtapiVirtToPhysAddr_: f6c97000 -> 00000000:af889000
  set TERM
  ph data[4]=0:af889000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0xb5eed388
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f98590, Count 0x40(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x5, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 4000, WordsLeft 4000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 8000, full size 8000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb5eed388
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f985d0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f985d0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6c58000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6c58000)
AtapiVirtToPhysAddr_: f6c58000 -> 00000000:af892000
  ph data[0]=0:af892000 (fff)
  get Phys(data[n=1+1000]=f6c59000)
AtapiVirtToPhysAddr_: f6c59000 -> 00000000:af894000
  ph data[1]=0:af894000 (fff)
  get Phys(data[n=2+1000]=f6c5a000)
AtapiVirtToPhysAddr_: f6c5a000 -> 00000000:af895000
  ph data[1]=0:af894000 (1fff)
  get Phys(data[n=2+2000]=f6c5b000)
AtapiVirtToPhysAddr_: f6c5b000 -> 00000000:af89e000
  ph data[2]=0:af89e000 (fff)
  get Phys(data[n=3+1000]=f6c5c000)
AtapiVirtToPhysAddr_: f6c5c000 -> 00000000:af897000
  ph data[3]=0:af897000 (fff)
  get Phys(data[n=4+1000]=f6c5d000)
AtapiVirtToPhysAddr_: f6c5d000 -> 00000000:af870000
  ph data[4]=0:af870000 (fff)
  get Phys(data[n=5+1000]=f6c5e000)
AtapiVirtToPhysAddr_: f6c5e000 -> 00000000:af881000
  ph data[5]=0:af881000 (fff)
  get Phys(data[n=6+1000]=f6c5f000)
AtapiVirtToPhysAddr_: f6c5f000 -> 00000000:af88a000
  ph data[6]=0:af88a000 (fff)
  get Phys(data[n=7+1000]=f6c60000)
AtapiVirtToPhysAddr_: f6c60000 -> 00000000:af88b000
  ph data[6]=0:af88a000 (1fff)
  get Phys(data[n=7+2000]=f6c61000)
AtapiVirtToPhysAddr_: f6c61000 -> 00000000:af88c000
  ph data[6]=0:af88a000 (2fff)
  get Phys(data[n=7+3000]=f6c62000)
AtapiVirtToPhysAddr_: f6c62000 -> 00000000:af88d000
  ph data[6]=0:af88a000 (3fff)
  get Phys(data[n=7+4000]=f6c63000)
AtapiVirtToPhysAddr_: f6c63000 -> 00000000:af896000
  ph data[7]=0:af896000 (fff)
  get Phys(data[n=8+1000]=f6c64000)
AtapiVirtToPhysAddr_: f6c64000 -> 00000000:af88f000
  ph data[8]=0:af88f000 (fff)
  get Phys(data[n=9+1000]=f6c65000)
AtapiVirtToPhysAddr_: f6c65000 -> 00000000:af868000
  ph data[9]=0:af868000 (fff)
  get Phys(data[n=10+1000]=f6c66000)
AtapiVirtToPhysAddr_: f6c66000 -> 00000000:af879000
  ph data[10]=0:af879000 (fff)
  get Phys(data[n=11+1000]=f6c67000)
AtapiVirtToPhysAddr_: f6c67000 -> 00000000:af882000
  set TERM
  ph data[11]=0:af882000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f985d0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0xc, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb6777018
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f98650, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f98650, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f6c68000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f6c68000)
AtapiVirtToPhysAddr_: f6c68000 -> 00000000:af883000
  ph data[0]=0:af883000 (fff)
  get Phys(data[n=1+1000]=f6c69000)
AtapiVirtToPhysAddr_: f6c69000 -> 00000000:af884000
  ph data[0]=0:af883000 (1fff)
  get Phys(data[n=1+2000]=f6c6a000)
AtapiVirtToPhysAddr_: f6c6a000 -> 00000000:af885000
  ph data[0]=0:af883000 (2fff)
  get Phys(data[n=1+3000]=f6c6b000)
AtapiVirtToPhysAddr_: f6c6b000 -> 00000000:af88e000
  ph data[1]=0:af88e000 (fff)
  get Phys(data[n=2+1000]=f6c6c000)
AtapiVirtToPhysAddr_: f6c6c000 -> 00000000:af887000
  ph data[2]=0:af887000 (fff)
  get Phys(data[n=3+1000]=f6c6d000)
AtapiVirtToPhysAddr_: f6c6d000 -> 00000000:af860000
  ph data[3]=0:af860000 (fff)
  get Phys(data[n=4+1000]=f6c6e000)
AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:af871000
  ph data[4]=0:af871000 (fff)
  get Phys(data[n=5+1000]=f6c6f000)
AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:af87a000
  ph data[5]=0:af87a000 (fff)
  get Phys(data[n=6+1000]=f6c70000)
AtapiVirtToPhysAddr_: f6c70000 -> 00000000:af87b000
  ph data[5]=0:af87a000 (1fff)
  get Phys(data[n=6+2000]=f6c71000)
AtapiVirtToPhysAddr_: f6c71000 -> 00000000:af87c000
  ph data[5]=0:af87a000 (2fff)
  get Phys(data[n=6+3000]=f6c72000)
AtapiVirtToPhysAddr_: f6c72000 -> 00000000:af87d000
  ph data[5]=0:af87a000 (3fff)
  get Phys(data[n=6+4000]=f6c73000)
AtapiVirtToPhysAddr_: f6c73000 -> 00000000:af886000
  ph data[6]=0:af886000 (fff)
  get Phys(data[n=7+1000]=f6c74000)
AtapiVirtToPhysAddr_: f6c74000 -> 00000000:af87f000
  ph data[7]=0:af87f000 (fff)
  get Phys(data[n=8+1000]=f6c75000)
AtapiVirtToPhysAddr_: f6c75000 -> 00000000:af858000
  ph data[8]=0:af858000 (fff)
  get Phys(data[n=9+1000]=f6c76000)
AtapiVirtToPhysAddr_: f6c76000 -> 00000000:af869000
  ph data[9]=0:af869000 (fff)
  get Phys(data[n=10+1000]=f6c77000)
AtapiVirtToPhysAddr_: f6c77000 -> 00000000:af872000
  set TERM
  ph data[10]=0:af872000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eecb68, CDB 0xb5eecb98, AtaReq 0xb677c090, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f986d0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f986d0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6c78000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6c78000)
AtapiVirtToPhysAddr_: f6c78000 -> 00000000:af873000
  ph data[0]=0:af873000 (fff)
  get Phys(data[n=1+1000]=f6c79000)
AtapiVirtToPhysAddr_: f6c79000 -> 00000000:af874000
  ph data[0]=0:af873000 (1fff)
  get Phys(data[n=1+2000]=f6c7a000)
AtapiVirtToPhysAddr_: f6c7a000 -> 00000000:af875000
  ph data[0]=0:af873000 (2fff)
  get Phys(data[n=1+3000]=f6c7b000)
AtapiVirtToPhysAddr_: f6c7b000 -> 00000000:af87e000
  ph data[1]=0:af87e000 (fff)
  get Phys(data[n=2+1000]=f6c7c000)
AtapiVirtToPhysAddr_: f6c7c000 -> 00000000:af877000
  ph data[2]=0:af877000 (fff)
  get Phys(data[n=3+1000]=f6c7d000)
AtapiVirtToPhysAddr_: f6c7d000 -> 00000000:af850000
  ph data[3]=0:af850000 (fff)
  get Phys(data[n=4+1000]=f6c7e000)
AtapiVirtToPhysAddr_: f6c7e000 -> 00000000:af861000
  ph data[4]=0:af861000 (fff)
  get Phys(data[n=5+1000]=f6c7f000)
AtapiVirtToPhysAddr_: f6c7f000 -> 00000000:af86a000
  ph data[5]=0:af86a000 (fff)
  get Phys(data[n=6+1000]=f6c80000)
AtapiVirtToPhysAddr_: f6c80000 -> 00000000:af86b000
  ph data[5]=0:af86a000 (1fff)
  get Phys(data[n=6+2000]=f6c81000)
AtapiVirtToPhysAddr_: f6c81000 -> 00000000:af86c000
  ph data[5]=0:af86a000 (2fff)
  get Phys(data[n=6+3000]=f6c82000)
AtapiVirtToPhysAddr_: f6c82000 -> 00000000:af86d000
  ph data[5]=0:af86a000 (3fff)
  get Phys(data[n=6+4000]=f6c83000)
AtapiVirtToPhysAddr_: f6c83000 -> 00000000:af876000
  ph data[6]=0:af876000 (fff)
  get Phys(data[n=7+1000]=f6c84000)
AtapiVirtToPhysAddr_: f6c84000 -> 00000000:af86f000
  ph data[7]=0:af86f000 (fff)
  get Phys(data[n=8+1000]=f6c85000)
AtapiVirtToPhysAddr_: f6c85000 -> 00000000:af848000
  ph data[8]=0:af848000 (fff)
  get Phys(data[n=9+1000]=f6c86000)
AtapiVirtToPhysAddr_: f6c86000 -> 00000000:af859000
  ph data[9]=0:af859000 (fff)
  get Phys(data[n=10+1000]=f6c87000)
AtapiVirtToPhysAddr_: f6c87000 -> 00000000:af862000
  set TERM
  ph data[10]=0:af862000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b5eecb68
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0xb5ef2528
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f98650, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0xb, flags 0x45, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f98750, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f98750, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6c88000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6c88000)
AtapiVirtToPhysAddr_: f6c88000 -> 00000000:af863000
  ph data[0]=0:af863000 (fff)
  get Phys(data[n=1+1000]=f6c89000)
AtapiVirtToPhysAddr_: f6c89000 -> 00000000:af864000
  ph data[0]=0:af863000 (1fff)
  get Phys(data[n=1+2000]=f6c8a000)
AtapiVirtToPhysAddr_: f6c8a000 -> 00000000:af865000
  ph data[0]=0:af863000 (2fff)
  get Phys(data[n=1+3000]=f6c8b000)
AtapiVirtToPhysAddr_: f6c8b000 -> 00000000:af86e000
  ph data[1]=0:af86e000 (fff)
  get Phys(data[n=2+1000]=f6c8c000)
AtapiVirtToPhysAddr_: f6c8c000 -> 00000000:af867000
  ph data[2]=0:af867000 (fff)
  get Phys(data[n=3+1000]=f6c8d000)
AtapiVirtToPhysAddr_: f6c8d000 -> 00000000:af840000
  ph data[3]=0:af840000 (fff)
  get Phys(data[n=4+1000]=f6c8e000)
AtapiVirtToPhysAddr_: f6c8e000 -> 00000000:af851000
  ph data[4]=0:af851000 (fff)
  get Phys(data[n=5+1000]=f6c8f000)
AtapiVirtToPhysAddr_: f6c8f000 -> 00000000:af85a000
  ph data[5]=0:af85a000 (fff)
  get Phys(data[n=6+1000]=f6c90000)
AtapiVirtToPhysAddr_: f6c90000 -> 00000000:af85b000
  ph data[5]=0:af85a000 (1fff)
  get Phys(data[n=6+2000]=f6c91000)
AtapiVirtToPhysAddr_: f6c91000 -> 00000000:af85c000
  ph data[5]=0:af85a000 (2fff)
  get Phys(data[n=6+3000]=f6c92000)
AtapiVirtToPhysAddr_: f6c92000 -> 00000000:af85d000
  ph data[5]=0:af85a000 (3fff)
  get Phys(data[n=6+4000]=f6c93000)
AtapiVirtToPhysAddr_: f6c93000 -> 00000000:af866000
  ph data[6]=0:af866000 (fff)
  get Phys(data[n=7+1000]=f6c94000)
AtapiVirtToPhysAddr_: f6c94000 -> 00000000:af85f000
  ph data[7]=0:af85f000 (fff)
  get Phys(data[n=8+1000]=f6c95000)
AtapiVirtToPhysAddr_: f6c95000 -> 00000000:af838000
  ph data[8]=0:af838000 (fff)
  get Phys(data[n=9+1000]=f6c96000)
AtapiVirtToPhysAddr_: f6c96000 -> 00000000:af849000
  ph data[9]=0:af849000 (fff)
  get Phys(data[n=10+1000]=f6c97000)
AtapiVirtToPhysAddr_: f6c97000 -> 00000000:af852000
  set TERM
  ph data[10]=0:af852000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0xb5eecb68
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eecb68, CDB 0xb5eecb98, AtaReq 0xb677c090, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f986d0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0xb, flags 0x45, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eecb68
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eecb68, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eecb68
AtapiInterrupt: NextRequest, srb=0xb5eed388
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff47c
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f98750, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0xb, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb5eed388
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f987d0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f987d0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6c58000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6c58000)
AtapiVirtToPhysAddr_: f6c58000 -> 00000000:af853000
  ph data[0]=0:af853000 (fff)
  get Phys(data[n=1+1000]=f6c59000)
AtapiVirtToPhysAddr_: f6c59000 -> 00000000:af854000
  ph data[0]=0:af853000 (1fff)
  get Phys(data[n=1+2000]=f6c5a000)
AtapiVirtToPhysAddr_: f6c5a000 -> 00000000:af855000
  ph data[0]=0:af853000 (2fff)
  get Phys(data[n=1+3000]=f6c5b000)
AtapiVirtToPhysAddr_: f6c5b000 -> 00000000:af85e000
  ph data[1]=0:af85e000 (fff)
  get Phys(data[n=2+1000]=f6c5c000)
AtapiVirtToPhysAddr_: f6c5c000 -> 00000000:af857000
  ph data[2]=0:af857000 (fff)
  get Phys(data[n=3+1000]=f6c5d000)
AtapiVirtToPhysAddr_: f6c5d000 -> 00000000:af830000
  ph data[3]=0:af830000 (fff)
  get Phys(data[n=4+1000]=f6c5e000)
AtapiVirtToPhysAddr_: f6c5e000 -> 00000000:af841000
  ph data[4]=0:af841000 (fff)
  get Phys(data[n=5+1000]=f6c5f000)
AtapiVirtToPhysAddr_: f6c5f000 -> 00000000:af84a000
  ph data[5]=0:af84a000 (fff)
  get Phys(data[n=6+1000]=f6c60000)
AtapiVirtToPhysAddr_: f6c60000 -> 00000000:af84b000
  ph data[5]=0:af84a000 (1fff)
  get Phys(data[n=6+2000]=f6c61000)
AtapiVirtToPhysAddr_: f6c61000 -> 00000000:af84c000
  ph data[5]=0:af84a000 (2fff)
  get Phys(data[n=6+3000]=f6c62000)
AtapiVirtToPhysAddr_: f6c62000 -> 00000000:af84d000
  ph data[5]=0:af84a000 (3fff)
  get Phys(data[n=6+4000]=f6c63000)
AtapiVirtToPhysAddr_: f6c63000 -> 00000000:af856000
  ph data[6]=0:af856000 (fff)
  get Phys(data[n=7+1000]=f6c64000)
AtapiVirtToPhysAddr_: f6c64000 -> 00000000:af84f000
  ph data[7]=0:af84f000 (fff)
  get Phys(data[n=8+1000]=f6c65000)
AtapiVirtToPhysAddr_: f6c65000 -> 00000000:af828000
  ph data[8]=0:af828000 (fff)
  get Phys(data[n=9+1000]=f6c66000)
AtapiVirtToPhysAddr_: f6c66000 -> 00000000:af839000
  ph data[9]=0:af839000 (fff)
  get Phys(data[n=10+1000]=f6c67000)
AtapiVirtToPhysAddr_: f6c67000 -> 00000000:af842000
  set TERM
  ph data[10]=0:af842000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f987d0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0xb, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eecb68, CDB 0xb5eecb98, AtaReq 0xb677c090, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f98850, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38f98850, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6c68000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6c68000)
AtapiVirtToPhysAddr_: f6c68000 -> 00000000:af843000
  ph data[0]=0:af843000 (fff)
  get Phys(data[n=1+1000]=f6c69000)
AtapiVirtToPhysAddr_: f6c69000 -> 00000000:af844000
  ph data[0]=0:af843000 (1fff)
  get Phys(data[n=1+2000]=f6c6a000)
AtapiVirtToPhysAddr_: f6c6a000 -> 00000000:af845000
  ph data[0]=0:af843000 (2fff)
  get Phys(data[n=1+3000]=f6c6b000)
AtapiVirtToPhysAddr_: f6c6b000 -> 00000000:af84e000
  ph data[1]=0:af84e000 (fff)
  get Phys(data[n=2+1000]=f6c6c000)
AtapiVirtToPhysAddr_: f6c6c000 -> 00000000:af847000
  ph data[2]=0:af847000 (fff)
  get Phys(data[n=3+1000]=f6c6d000)
AtapiVirtToPhysAddr_: f6c6d000 -> 00000000:af820000
  ph data[3]=0:af820000 (fff)
  get Phys(data[n=4+1000]=f6c6e000)
AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:af831000
  ph data[4]=0:af831000 (fff)
  get Phys(data[n=5+1000]=f6c6f000)
AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:af83a000
  ph data[5]=0:af83a000 (fff)
  get Phys(data[n=6+1000]=f6c70000)
AtapiVirtToPhysAddr_: f6c70000 -> 00000000:af83b000
  ph data[5]=0:af83a000 (1fff)
  get Phys(data[n=6+2000]=f6c71000)
AtapiVirtToPhysAddr_: f6c71000 -> 00000000:af83c000
  ph data[5]=0:af83a000 (2fff)
  get Phys(data[n=6+3000]=f6c72000)
AtapiVirtToPhysAddr_: f6c72000 -> 00000000:af83d000
  ph data[5]=0:af83a000 (3fff)
  get Phys(data[n=6+4000]=f6c73000)
AtapiVirtToPhysAddr_: f6c73000 -> 00000000:af846000
  ph data[6]=0:af846000 (fff)
  get Phys(data[n=7+1000]=f6c74000)
AtapiVirtToPhysAddr_: f6c74000 -> 00000000:af83f000
  ph data[7]=0:af83f000 (fff)
  get Phys(data[n=8+1000]=f6c75000)
AtapiVirtToPhysAddr_: f6c75000 -> 00000000:af818000
  ph data[8]=0:af818000 (fff)
  get Phys(data[n=9+1000]=f6c76000)
AtapiVirtToPhysAddr_: f6c76000 -> 00000000:af829000
  ph data[9]=0:af829000 (fff)
  get Phys(data[n=10+1000]=f6c77000)
AtapiVirtToPhysAddr_: f6c77000 -> 00000000:af832000
  set TERM
  ph data[10]=0:af832000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5eecb68
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb6777018
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f988d0, OrigWordsRequested 0x4000, DevSize 0x40
IdeReadWrite (REQ): Starting sector is 38f988d0, Number of WORDS 0x4000, DevSize 0x40
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f6c78000, count 8000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f6c78000)
AtapiVirtToPhysAddr_: f6c78000 -> 00000000:af833000
  ph data[0]=0:af833000 (fff)
  get Phys(data[n=1+1000]=f6c79000)
AtapiVirtToPhysAddr_: f6c79000 -> 00000000:af834000
  ph data[0]=0:af833000 (1fff)
  get Phys(data[n=1+2000]=f6c7a000)
AtapiVirtToPhysAddr_: f6c7a000 -> 00000000:af835000
  ph data[0]=0:af833000 (2fff)
  get Phys(data[n=1+3000]=f6c7b000)
AtapiVirtToPhysAddr_: f6c7b000 -> 00000000:af83e000
  ph data[1]=0:af83e000 (fff)
  get Phys(data[n=2+1000]=f6c7c000)
AtapiVirtToPhysAddr_: f6c7c000 -> 00000000:af837000
  ph data[2]=0:af837000 (fff)
  get Phys(data[n=3+1000]=f6c7d000)
AtapiVirtToPhysAddr_: f6c7d000 -> 00000000:af810000
  ph data[3]=0:af810000 (fff)
  get Phys(data[n=4+1000]=f6c7e000)
AtapiVirtToPhysAddr_: f6c7e000 -> 00000000:af821000
  ph data[4]=0:af821000 (fff)
  get Phys(data[n=5+1000]=f6c7f000)
AtapiVirtToPhysAddr_: f6c7f000 -> 00000000:af82a000
  set TERM
  ph data[5]=0:af82a000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0xb5eecb68
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eecb68, CDB 0xb5eecb98, AtaReq 0xb677c090, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b55f4
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f98850, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0xb, flags 0x45, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eecb68
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5770
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 38f9f160, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38f9f160, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6c80000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6c80000)
AtapiVirtToPhysAddr_: f6c80000 -> 00000000:af82b000
  ph data[0]=0:af82b000 (fff)
  get Phys(data[n=1+1000]=f6c81000)
AtapiVirtToPhysAddr_: f6c81000 -> 00000000:af82c000
  set TERM
  ph data[0]=0:af82b000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb6779048, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb6779048
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39018900, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39018900, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f6c82000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f6c82000)
AtapiVirtToPhysAddr_: f6c82000 -> 00000000:af82d000
  ph data[0]=0:af82d000 (fff)
  get Phys(data[n=1+1000]=f6c83000)
AtapiVirtToPhysAddr_: f6c83000 -> 00000000:af836000
  ph data[1]=0:af836000 (fff)
  get Phys(data[n=2+1000]=f6c84000)
AtapiVirtToPhysAddr_: f6c84000 -> 00000000:af82f000
  ph data[2]=0:af82f000 (fff)
  get Phys(data[n=3+1000]=f6c85000)
AtapiVirtToPhysAddr_: f6c85000 -> 00000000:af808000
  ph data[3]=0:af808000 (fff)
  get Phys(data[n=4+1000]=f6c86000)
AtapiVirtToPhysAddr_: f6c86000 -> 00000000:af819000
  ph data[4]=0:af819000 (fff)
  get Phys(data[n=5+1000]=f6c87000)
AtapiVirtToPhysAddr_: f6c87000 -> 00000000:af822000
  ph data[5]=0:af822000 (fff)
  get Phys(data[n=6+1000]=f6c88000)
AtapiVirtToPhysAddr_: f6c88000 -> 00000000:af823000
  ph data[5]=0:af822000 (1fff)
  get Phys(data[n=6+2000]=f6c89000)
AtapiVirtToPhysAddr_: f6c89000 -> 00000000:af824000
  ph data[5]=0:af822000 (2fff)
  get Phys(data[n=6+3000]=f6c8a000)
AtapiVirtToPhysAddr_: f6c8a000 -> 00000000:af825000
  ph data[5]=0:af822000 (3fff)
  get Phys(data[n=6+4000]=f6c8b000)
AtapiVirtToPhysAddr_: f6c8b000 -> 00000000:af82e000
  ph data[6]=0:af82e000 (fff)
  get Phys(data[n=7+1000]=f6c8c000)
AtapiVirtToPhysAddr_: f6c8c000 -> 00000000:af827000
  ph data[7]=0:af827000 (fff)
  get Phys(data[n=8+1000]=f6c8d000)
AtapiVirtToPhysAddr_: f6c8d000 -> 00000000:af800000
  ph data[8]=0:af800000 (fff)
  get Phys(data[n=9+1000]=f6c8e000)
AtapiVirtToPhysAddr_: f6c8e000 -> 00000000:af811000
  ph data[9]=0:af811000 (fff)
  get Phys(data[n=10+1000]=f6c8f000)
AtapiVirtToPhysAddr_: f6c8f000 -> 00000000:af81a000
  ph data[10]=0:af81a000 (fff)
  get Phys(data[n=11+1000]=f6c90000)
AtapiVirtToPhysAddr_: f6c90000 -> 00000000:af81b000
  ph data[10]=0:af81a000 (1fff)
  get Phys(data[n=11+2000]=f6c91000)
AtapiVirtToPhysAddr_: f6c91000 -> 00000000:af81c000
  set TERM
  ph data[10]=0:af81a000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eecb68, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eecb68
AtapiInterrupt: NextRequest, srb=0xb5ef2528
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x2a
UniataNeedQueueing: qd=3
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f988d0, Count 0x40(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x6, flags 0x45, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eecb68, CDB 0xb5eecb98, AtaReq 0xb677c090, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39018980, OrigWordsRequested 0x3000, DevSize 0x30
IdeReadWrite (REQ): Starting sector is 39018980, Number of WORDS 0x3000, DevSize 0x30
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6c92000, count 6000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6c92000)
AtapiVirtToPhysAddr_: f6c92000 -> 00000000:af81d000
  ph data[0]=0:af81d000 (fff)
  get Phys(data[n=1+1000]=f6c93000)
AtapiVirtToPhysAddr_: f6c93000 -> 00000000:af826000
  ph data[1]=0:af826000 (fff)
  get Phys(data[n=2+1000]=f6c94000)
AtapiVirtToPhysAddr_: f6c94000 -> 00000000:af81f000
  ph data[2]=0:af81f000 (fff)
  get Phys(data[n=3+1000]=f6c95000)
AtapiVirtToPhysAddr_: f6c95000 -> 00000000:af7f8000
  ph data[3]=0:af7f8000 (fff)
  get Phys(data[n=4+1000]=f6c96000)
AtapiVirtToPhysAddr_: f6c96000 -> 00000000:af809000
  ph data[4]=0:af809000 (fff)
  get Phys(data[n=5+1000]=f6c97000)
AtapiVirtToPhysAddr_: f6c97000 -> 00000000:af812000
  set TERM
  ph data[5]=0:af812000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b5eecb68
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 4000, WordsLeft 4000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 8000, full size 8000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0xb5eed388
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: qd=3
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38f9f160, Count 0x10(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0xb6346750
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb6779048, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5724
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39018900, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0xb, flags 0x45, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0xb5eecb68
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eecb68, CDB 0xb5eecb98, AtaReq 0xb677c090, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704ae30
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39018980, Count 0x30(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x6, flags 0x45, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eecb68
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 3000, WordsLeft 3000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 6000, full size 6000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eecb68, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eecb68
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eecb68, CDB 0xb5eecb98, AtaReq 0xb677c090, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb5eecb68
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 390189b0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390189b0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6c58000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6c58000)
AtapiVirtToPhysAddr_: f6c58000 -> 00000000:af813000
  ph data[0]=0:af813000 (fff)
  get Phys(data[n=1+1000]=f6c59000)
AtapiVirtToPhysAddr_: f6c59000 -> 00000000:af814000
  ph data[0]=0:af813000 (1fff)
  get Phys(data[n=1+2000]=f6c5a000)
AtapiVirtToPhysAddr_: f6c5a000 -> 00000000:af815000
  ph data[0]=0:af813000 (2fff)
  get Phys(data[n=1+3000]=f6c5b000)
AtapiVirtToPhysAddr_: f6c5b000 -> 00000000:af81e000
  ph data[1]=0:af81e000 (fff)
  get Phys(data[n=2+1000]=f6c5c000)
AtapiVirtToPhysAddr_: f6c5c000 -> 00000000:af817000
  ph data[2]=0:af817000 (fff)
  get Phys(data[n=3+1000]=f6c5d000)
AtapiVirtToPhysAddr_: f6c5d000 -> 00000000:af7f0000
  ph data[3]=0:af7f0000 (fff)
  get Phys(data[n=4+1000]=f6c5e000)
AtapiVirtToPhysAddr_: f6c5e000 -> 00000000:af801000
  ph data[4]=0:af801000 (fff)
  get Phys(data[n=5+1000]=f6c5f000)
AtapiVirtToPhysAddr_: f6c5f000 -> 00000000:af80a000
  ph data[5]=0:af80a000 (fff)
  get Phys(data[n=6+1000]=f6c60000)
AtapiVirtToPhysAddr_: f6c60000 -> 00000000:af80b000
  ph data[5]=0:af80a000 (1fff)
  get Phys(data[n=6+2000]=f6c61000)
AtapiVirtToPhysAddr_: f6c61000 -> 00000000:af80c000
  ph data[5]=0:af80a000 (2fff)
  get Phys(data[n=6+3000]=f6c62000)
AtapiVirtToPhysAddr_: f6c62000 -> 00000000:af80d000
  ph data[5]=0:af80a000 (3fff)
  get Phys(data[n=6+4000]=f6c63000)
AtapiVirtToPhysAddr_: f6c63000 -> 00000000:af816000
  ph data[6]=0:af816000 (fff)
  get Phys(data[n=7+1000]=f6c64000)
AtapiVirtToPhysAddr_: f6c64000 -> 00000000:af80f000
  ph data[7]=0:af80f000 (fff)
  get Phys(data[n=8+1000]=f6c65000)
AtapiVirtToPhysAddr_: f6c65000 -> 00000000:af7e8000
  ph data[8]=0:af7e8000 (fff)
  get Phys(data[n=9+1000]=f6c66000)
AtapiVirtToPhysAddr_: f6c66000 -> 00000000:af7f9000
  ph data[9]=0:af7f9000 (fff)
  get Phys(data[n=10+1000]=f6c67000)
AtapiVirtToPhysAddr_: f6c67000 -> 00000000:af802000
  set TERM
  ph data[10]=0:af802000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390189b0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0xb, flags 0x45, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eecb68
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb6779048, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb6779048
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39018a30, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39018a30, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f6c68000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f6c68000)
AtapiVirtToPhysAddr_: f6c68000 -> 00000000:af803000
  ph data[0]=0:af803000 (fff)
  get Phys(data[n=1+1000]=f6c69000)
AtapiVirtToPhysAddr_: f6c69000 -> 00000000:af804000
  ph data[0]=0:af803000 (1fff)
  get Phys(data[n=1+2000]=f6c6a000)
AtapiVirtToPhysAddr_: f6c6a000 -> 00000000:af805000
  ph data[0]=0:af803000 (2fff)
  get Phys(data[n=1+3000]=f6c6b000)
AtapiVirtToPhysAddr_: f6c6b000 -> 00000000:af80e000
  ph data[1]=0:af80e000 (fff)
  get Phys(data[n=2+1000]=f6c6c000)
AtapiVirtToPhysAddr_: f6c6c000 -> 00000000:af807000
  ph data[2]=0:af807000 (fff)
  get Phys(data[n=3+1000]=f6c6d000)
AtapiVirtToPhysAddr_: f6c6d000 -> 00000000:af7e0000
  ph data[3]=0:af7e0000 (fff)
  get Phys(data[n=4+1000]=f6c6e000)
AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:af7f1000
  ph data[4]=0:af7f1000 (fff)
  get Phys(data[n=5+1000]=f6c6f000)
AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:af7fa000
  ph data[5]=0:af7fa000 (fff)
  get Phys(data[n=6+1000]=f6c70000)
AtapiVirtToPhysAddr_: f6c70000 -> 00000000:af7fb000
  ph data[5]=0:af7fa000 (1fff)
  get Phys(data[n=6+2000]=f6c71000)
AtapiVirtToPhysAddr_: f6c71000 -> 00000000:af7fc000
  ph data[5]=0:af7fa000 (2fff)
  get Phys(data[n=6+3000]=f6c72000)
AtapiVirtToPhysAddr_: f6c72000 -> 00000000:af7fd000
  ph data[5]=0:af7fa000 (3fff)
  get Phys(data[n=6+4000]=f6c73000)
AtapiVirtToPhysAddr_: f6c73000 -> 00000000:af806000
  ph data[6]=0:af806000 (fff)
  get Phys(data[n=7+1000]=f6c74000)
AtapiVirtToPhysAddr_: f6c74000 -> 00000000:af7ff000
  ph data[7]=0:af7ff000 (fff)
  get Phys(data[n=8+1000]=f6c75000)
AtapiVirtToPhysAddr_: f6c75000 -> 00000000:af7d8000
  ph data[8]=0:af7d8000 (fff)
  get Phys(data[n=9+1000]=f6c76000)
AtapiVirtToPhysAddr_: f6c76000 -> 00000000:af7e9000
  ph data[9]=0:af7e9000 (fff)
  get Phys(data[n=10+1000]=f6c77000)
AtapiVirtToPhysAddr_: f6c77000 -> 00000000:af7f2000
  set TERM
  ph data[10]=0:af7f2000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39018ab0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39018ab0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6c78000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6c78000)
AtapiVirtToPhysAddr_: f6c78000 -> 00000000:af7f3000
  ph data[0]=0:af7f3000 (fff)
  get Phys(data[n=1+1000]=f6c79000)
AtapiVirtToPhysAddr_: f6c79000 -> 00000000:af7f4000
  ph data[0]=0:af7f3000 (1fff)
  get Phys(data[n=1+2000]=f6c7a000)
AtapiVirtToPhysAddr_: f6c7a000 -> 00000000:af7f5000
  ph data[0]=0:af7f3000 (2fff)
  get Phys(data[n=1+3000]=f6c7b000)
AtapiVirtToPhysAddr_: f6c7b000 -> 00000000:af7fe000
  ph data[1]=0:af7fe000 (fff)
  get Phys(data[n=2+1000]=f6c7c000)
AtapiVirtToPhysAddr_: f6c7c000 -> 00000000:af7f7000
  ph data[2]=0:af7f7000 (fff)
  get Phys(data[n=3+1000]=f6c7d000)
AtapiVirtToPhysAddr_: f6c7d000 -> 00000000:af7d0000
  ph data[3]=0:af7d0000 (fff)
  get Phys(data[n=4+1000]=f6c7e000)
AtapiVirtToPhysAddr_: f6c7e000 -> 00000000:af7e1000
  ph data[4]=0:af7e1000 (fff)
  get Phys(data[n=5+1000]=f6c7f000)
AtapiVirtToPhysAddr_: f6c7f000 -> 00000000:af7ea000
  ph data[5]=0:af7ea000 (fff)
  get Phys(data[n=6+1000]=f6c80000)
AtapiVirtToPhysAddr_: f6c80000 -> 00000000:af7eb000
  ph data[5]=0:af7ea000 (1fff)
  get Phys(data[n=6+2000]=f6c81000)
AtapiVirtToPhysAddr_: f6c81000 -> 00000000:af7ec000
  ph data[5]=0:af7ea000 (2fff)
  get Phys(data[n=6+3000]=f6c82000)
AtapiVirtToPhysAddr_: f6c82000 -> 00000000:af7ed000
  ph data[5]=0:af7ea000 (3fff)
  get Phys(data[n=6+4000]=f6c83000)
AtapiVirtToPhysAddr_: f6c83000 -> 00000000:af7f6000
  ph data[6]=0:af7f6000 (fff)
  get Phys(data[n=7+1000]=f6c84000)
AtapiVirtToPhysAddr_: f6c84000 -> 00000000:af7ef000
  ph data[7]=0:af7ef000 (fff)
  get Phys(data[n=8+1000]=f6c85000)
AtapiVirtToPhysAddr_: f6c85000 -> 00000000:af7c8000
  ph data[8]=0:af7c8000 (fff)
  get Phys(data[n=9+1000]=f6c86000)
AtapiVirtToPhysAddr_: f6c86000 -> 00000000:af7d9000
  ph data[9]=0:af7d9000 (fff)
  get Phys(data[n=10+1000]=f6c87000)
AtapiVirtToPhysAddr_: f6c87000 -> 00000000:af7e2000
  set TERM
  ph data[10]=0:af7e2000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eecb68, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eecb68
AtapiInterrupt: NextRequest, srb=0xb6346750
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb6779048, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39018a30, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0xb, flags 0x45, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eecb68, CDB 0xb5eecb98, AtaReq 0xb677c090, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77b5720
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39018b30, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39018b30, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6c88000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6c88000)
AtapiVirtToPhysAddr_: f6c88000 -> 00000000:af7e3000
  ph data[0]=0:af7e3000 (fff)
  get Phys(data[n=1+1000]=f6c89000)
AtapiVirtToPhysAddr_: f6c89000 -> 00000000:af7e4000
  ph data[0]=0:af7e3000 (1fff)
  get Phys(data[n=1+2000]=f6c8a000)
AtapiVirtToPhysAddr_: f6c8a000 -> 00000000:af7e5000
  ph data[0]=0:af7e3000 (2fff)
  get Phys(data[n=1+3000]=f6c8b000)
AtapiVirtToPhysAddr_: f6c8b000 -> 00000000:af7ee000
  ph data[1]=0:af7ee000 (fff)
  get Phys(data[n=2+1000]=f6c8c000)
AtapiVirtToPhysAddr_: f6c8c000 -> 00000000:af7e7000
  ph data[2]=0:af7e7000 (fff)
  get Phys(data[n=3+1000]=f6c8d000)
AtapiVirtToPhysAddr_: f6c8d000 -> 00000000:af7c0000
  ph data[3]=0:af7c0000 (fff)
  get Phys(data[n=4+1000]=f6c8e000)
AtapiVirtToPhysAddr_: f6c8e000 -> 00000000:af7d1000
  ph data[4]=0:af7d1000 (fff)
  get Phys(data[n=5+1000]=f6c8f000)
AtapiVirtToPhysAddr_: f6c8f000 -> 00000000:af7da000
  ph data[5]=0:af7da000 (fff)
  get Phys(data[n=6+1000]=f6c90000)
AtapiVirtToPhysAddr_: f6c90000 -> 00000000:af7db000
  ph data[5]=0:af7da000 (1fff)
  get Phys(data[n=6+2000]=f6c91000)
AtapiVirtToPhysAddr_: f6c91000 -> 00000000:af7dc000
  ph data[5]=0:af7da000 (2fff)
  get Phys(data[n=6+3000]=f6c92000)
AtapiVirtToPhysAddr_: f6c92000 -> 00000000:af7dd000
  ph data[5]=0:af7da000 (3fff)
  get Phys(data[n=6+4000]=f6c93000)
AtapiVirtToPhysAddr_: f6c93000 -> 00000000:af7e6000
  ph data[6]=0:af7e6000 (fff)
  get Phys(data[n=7+1000]=f6c94000)
AtapiVirtToPhysAddr_: f6c94000 -> 00000000:af7df000
  ph data[7]=0:af7df000 (fff)
  get Phys(data[n=8+1000]=f6c95000)
AtapiVirtToPhysAddr_: f6c95000 -> 00000000:af7b8000
  ph data[8]=0:af7b8000 (fff)
  get Phys(data[n=9+1000]=f6c96000)
AtapiVirtToPhysAddr_: f6c96000 -> 00000000:af7c9000
  ph data[9]=0:af7c9000 (fff)
  get Phys(data[n=10+1000]=f6c97000)
AtapiVirtToPhysAddr_: f6c97000 -> 00000000:af7d2000
  set TERM
  ph data[10]=0:af7d2000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b5eecb68
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0xb5eed388
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704ae30
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39018ab0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0xb, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0xb5eecb68
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eecb68, CDB 0xb5eecb98, AtaReq 0xb677c090, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704b97c
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39018b30, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0xb, flags 0x45, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eecb68
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
(dll/win32/userenv/environment.c:296) RegOpenKeyExW() failed (Error 2)
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eecb68, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eecb68
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eecb68, CDB 0xb5eecb98, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5eecb68
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704b230
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc0640, OrigWordsRequested 0x8100, DevSize 0x81
IdeReadWrite (REQ): Starting sector is 38fc0640, Number of WORDS 0x8100, DevSize 0x81
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7012000, count 10200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7012000)
AtapiVirtToPhysAddr_: f7012000 -> 00000000:12123000
  ph data[0]=0:12123000 (fff)
  get Phys(data[n=1+1000]=f7013000)
AtapiVirtToPhysAddr_: f7013000 -> 00000000:12124000
  ph data[0]=0:12123000 (1fff)
  get Phys(data[n=1+2000]=f7014000)
AtapiVirtToPhysAddr_: f7014000 -> 00000000:12125000
  ph data[0]=0:12123000 (2fff)
  get Phys(data[n=1+3000]=f7015000)
AtapiVirtToPhysAddr_: f7015000 -> 00000000:1211e000
  ph data[1]=0:1211e000 (fff)
  get Phys(data[n=2+1000]=f7016000)
AtapiVirtToPhysAddr_: f7016000 -> 00000000:1211f000
  ph data[1]=0:1211e000 (1fff)
  get Phys(data[n=2+2000]=f7017000)
AtapiVirtToPhysAddr_: f7017000 -> 00000000:12120000
  ph data[1]=0:1211e000 (2fff)
  get Phys(data[n=2+3000]=f7018000)
AtapiVirtToPhysAddr_: f7018000 -> 00000000:12121000
  ph data[1]=0:1211e000 (3fff)
  get Phys(data[n=2+4000]=f7019000)
AtapiVirtToPhysAddr_: f7019000 -> 00000000:12122000
  ph data[1]=0:1211e000 (4fff)
  get Phys(data[n=2+5000]=f701a000)
AtapiVirtToPhysAddr_: f701a000 -> 00000000:1212b000
  ph data[2]=0:1212b000 (fff)
  get Phys(data[n=3+1000]=f701b000)
AtapiVirtToPhysAddr_: f701b000 -> 00000000:1212c000
  ph data[2]=0:1212b000 (1fff)
  get Phys(data[n=3+2000]=f701c000)
AtapiVirtToPhysAddr_: f701c000 -> 00000000:1212d000
  ph data[2]=0:1212b000 (2fff)
  get Phys(data[n=3+3000]=f701d000)
AtapiVirtToPhysAddr_: f701d000 -> 00000000:12126000
  ph data[3]=0:12126000 (fff)
  get Phys(data[n=4+1000]=f701e000)
AtapiVirtToPhysAddr_: f701e000 -> 00000000:12127000
  ph data[3]=0:12126000 (1fff)
  get Phys(data[n=4+2000]=f701f000)
AtapiVirtToPhysAddr_: f701f000 -> 00000000:12128000
  ph data[3]=0:12126000 (2fff)
  get Phys(data[n=4+3000]=f7020000)
AtapiVirtToPhysAddr_: f7020000 -> 00000000:12129000
  ph data[3]=0:12126000 (3fff)
  get Phys(data[n=4+4000]=f7021000)
AtapiVirtToPhysAddr_: f7021000 -> 00000000:1212a000
  ph data[3]=0:12126000 (4fff)
  get Phys(data[n=4+5000]=f7022000)
AtapiVirtToPhysAddr_: f7022000 -> 00000000:12133000
  set TERM
  ph data[4]=0:12133000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc0640, Count 0x81(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x5, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eecb68
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7665418
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3960b260, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3960b260, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6c6c000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6c6c000)
AtapiVirtToPhysAddr_: f6c6c000 -> 00000000:12163000
  ph data[0]=0:12163000 (fff)
  get Phys(data[n=1+1000]=f6c6d000)
AtapiVirtToPhysAddr_: f6c6d000 -> 00000000:12164000
  ph data[0]=0:12163000 (1fff)
  get Phys(data[n=1+2000]=f6c6e000)
AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:12165000
  ph data[0]=0:12163000 (2fff)
  get Phys(data[n=1+3000]=f6c6f000)
AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:1215e000
  ph data[1]=0:1215e000 (fff)
  get Phys(data[n=2+1000]=f6c70000)
AtapiVirtToPhysAddr_: f6c70000 -> 00000000:12167000
  ph data[2]=0:12167000 (fff)
  get Phys(data[n=3+1000]=f6c71000)
AtapiVirtToPhysAddr_: f6c71000 -> 00000000:12168000
  ph data[2]=0:12167000 (1fff)
  get Phys(data[n=3+2000]=f6c72000)
AtapiVirtToPhysAddr_: f6c72000 -> 00000000:12161000
  ph data[3]=0:12161000 (fff)
  get Phys(data[n=4+1000]=f6c73000)
AtapiVirtToPhysAddr_: f6c73000 -> 00000000:12162000
  ph data[3]=0:12161000 (1fff)
  get Phys(data[n=4+2000]=f6c74000)
AtapiVirtToPhysAddr_: f6c74000 -> 00000000:1216b000
  ph data[4]=0:1216b000 (fff)
  get Phys(data[n=5+1000]=f6c75000)
AtapiVirtToPhysAddr_: f6c75000 -> 00000000:1216c000
  ph data[4]=0:1216b000 (1fff)
  get Phys(data[n=5+2000]=f6c76000)
AtapiVirtToPhysAddr_: f6c76000 -> 00000000:1216d000
  ph data[4]=0:1216b000 (2fff)
  get Phys(data[n=5+3000]=f6c77000)
AtapiVirtToPhysAddr_: f6c77000 -> 00000000:12166000
  ph data[5]=0:12166000 (fff)
  get Phys(data[n=6+1000]=f6c78000)
AtapiVirtToPhysAddr_: f6c78000 -> 00000000:1216f000
  ph data[6]=0:1216f000 (fff)
  get Phys(data[n=7+1000]=f6c79000)
AtapiVirtToPhysAddr_: f6c79000 -> 00000000:12170000
  ph data[6]=0:1216f000 (1fff)
  get Phys(data[n=7+2000]=f6c7a000)
AtapiVirtToPhysAddr_: f6c7a000 -> 00000000:12169000
  ph data[7]=0:12169000 (fff)
  get Phys(data[n=8+1000]=f6c7b000)
AtapiVirtToPhysAddr_: f6c7b000 -> 00000000:1216a000
  set TERM
  ph data[7]=0:12169000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7665418
** Ide: Command AtaReq 0xb6779048
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3960b2e0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 3960b2e0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f6c7c000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f6c7c000)
AtapiVirtToPhysAddr_: f6c7c000 -> 00000000:12173000
  ph data[0]=0:12173000 (fff)
  get Phys(data[n=1+1000]=f6c7d000)
AtapiVirtToPhysAddr_: f6c7d000 -> 00000000:12174000
  ph data[0]=0:12173000 (1fff)
  get Phys(data[n=1+2000]=f6c7e000)
AtapiVirtToPhysAddr_: f6c7e000 -> 00000000:12175000
  ph data[0]=0:12173000 (2fff)
  get Phys(data[n=1+3000]=f6c7f000)
AtapiVirtToPhysAddr_: f6c7f000 -> 00000000:1216e000
  ph data[1]=0:1216e000 (fff)
  get Phys(data[n=2+1000]=f6c80000)
AtapiVirtToPhysAddr_: f6c80000 -> 00000000:12177000
  ph data[2]=0:12177000 (fff)
  get Phys(data[n=3+1000]=f6c81000)
AtapiVirtToPhysAddr_: f6c81000 -> 00000000:12178000
  ph data[2]=0:12177000 (1fff)
  get Phys(data[n=3+2000]=f6c82000)
AtapiVirtToPhysAddr_: f6c82000 -> 00000000:12171000
  ph data[3]=0:12171000 (fff)
  get Phys(data[n=4+1000]=f6c83000)
AtapiVirtToPhysAddr_: f6c83000 -> 00000000:12172000
  ph data[3]=0:12171000 (1fff)
  get Phys(data[n=4+2000]=f6c84000)
AtapiVirtToPhysAddr_: f6c84000 -> 00000000:1217b000
  ph data[4]=0:1217b000 (fff)
  get Phys(data[n=5+1000]=f6c85000)
AtapiVirtToPhysAddr_: f6c85000 -> 00000000:1217c000
  ph data[4]=0:1217b000 (1fff)
  get Phys(data[n=5+2000]=f6c86000)
AtapiVirtToPhysAddr_: f6c86000 -> 00000000:1217d000
  ph data[4]=0:1217b000 (2fff)
  get Phys(data[n=5+3000]=f6c87000)
AtapiVirtToPhysAddr_: f6c87000 -> 00000000:12176000
  ph data[5]=0:12176000 (fff)
  get Phys(data[n=6+1000]=f6c88000)
AtapiVirtToPhysAddr_: f6c88000 -> 00000000:1217f000
  ph data[6]=0:1217f000 (fff)
  get Phys(data[n=7+1000]=f6c89000)
AtapiVirtToPhysAddr_: f6c89000 -> 00000000:12180000
  ph data[6]=0:1217f000 (1fff)
  get Phys(data[n=7+2000]=f6c8a000)
AtapiVirtToPhysAddr_: f6c8a000 -> 00000000:12179000
  ph data[7]=0:12179000 (fff)
  get Phys(data[n=8+1000]=f6c8b000)
AtapiVirtToPhysAddr_: f6c8b000 -> 00000000:1217a000
  set TERM
  ph data[7]=0:12179000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7665418
** Ide: Command AtaReq 0xb6777018
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3960b360, OrigWordsRequested 0x5800, DevSize 0x58
IdeReadWrite (REQ): Starting sector is 3960b360, Number of WORDS 0x5800, DevSize 0x58
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f6c8c000, count b000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f6c8c000)
AtapiVirtToPhysAddr_: f6c8c000 -> 00000000:12183000
  ph data[0]=0:12183000 (fff)
  get Phys(data[n=1+1000]=f6c8d000)
AtapiVirtToPhysAddr_: f6c8d000 -> 00000000:12184000
  ph data[0]=0:12183000 (1fff)
  get Phys(data[n=1+2000]=f6c8e000)
AtapiVirtToPhysAddr_: f6c8e000 -> 00000000:12185000
  ph data[0]=0:12183000 (2fff)
  get Phys(data[n=1+3000]=f6c8f000)
AtapiVirtToPhysAddr_: f6c8f000 -> 00000000:1217e000
  ph data[1]=0:1217e000 (fff)
  get Phys(data[n=2+1000]=f6c90000)
AtapiVirtToPhysAddr_: f6c90000 -> 00000000:12187000
  ph data[2]=0:12187000 (fff)
  get Phys(data[n=3+1000]=f6c91000)
AtapiVirtToPhysAddr_: f6c91000 -> 00000000:12188000
  ph data[2]=0:12187000 (1fff)
  get Phys(data[n=3+2000]=f6c92000)
AtapiVirtToPhysAddr_: f6c92000 -> 00000000:12181000
  ph data[3]=0:12181000 (fff)
  get Phys(data[n=4+1000]=f6c93000)
AtapiVirtToPhysAddr_: f6c93000 -> 00000000:12182000
  ph data[3]=0:12181000 (1fff)
  get Phys(data[n=4+2000]=f6c94000)
AtapiVirtToPhysAddr_: f6c94000 -> 00000000:1218b000
  ph data[4]=0:1218b000 (fff)
  get Phys(data[n=5+1000]=f6c95000)
AtapiVirtToPhysAddr_: f6c95000 -> 00000000:1218c000
  ph data[4]=0:1218b000 (1fff)
  get Phys(data[n=5+2000]=f6c96000)
AtapiVirtToPhysAddr_: f6c96000 -> 00000000:1218d000
  set TERM
  ph data[4]=0:1218b000 (2fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8100, WordsLeft 8100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10200, full size 10200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eecb68, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eecb68
AtapiInterrupt: NextRequest, srb=0xb5eed388
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff4a4
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3960b260, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x8, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0xb6346750
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff4c8
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3960b2e0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x8, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0xb5ef2528
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff758
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3960b360, Count 0x58(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x5, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 5800, WordsLeft 5800
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered b000, full size b000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(win32ss/user/winsrv/usersrv/init.c:162) We are logged on
err:(base/system/winlogon/sas.c:538) Failed to open enumeration: 8
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef2528
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704b60c
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc0640, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fc0640, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:12084000
  ph data[0]=0:12084000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:1207d000
  set TERM
  ph data[1]=0:1207d000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc0640, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x2, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef2528
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704acec
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390585e0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390585e0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:121b6000
  ph data[0]=0:121b6000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:121c7000
  set TERM
  ph data[1]=0:121c7000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390585e0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x2, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef2528
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704b40c
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586b0, OrigWordsRequested 0xe00, DevSize 0xe
IdeReadWrite (REQ): Starting sector is 390586b0, Number of WORDS 0xe00, DevSize 0xe
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7050000, count 1c00, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:121f6000
  ph data[0]=0:121f6000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:12207000
  set TERM
  ph data[1]=0:12207000 (bff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586b0, Count 0xe(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x2, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered e00, WordsLeft e00
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 1c00, full size 1c00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef2528
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9ad00
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:1225f000
  ph data[0]=0:1225f000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:12258000
  set TERM
  ph data[1]=0:12258000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x2, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef2528
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9ad00
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:12299000
  ph data[0]=0:12299000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:1229a000
  set TERM
  ph data[0]=0:12299000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef2528
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9b230
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39058740, OrigWordsRequested 0x200, DevSize 0x2
IdeReadWrite (REQ): Starting sector is 39058740, Number of WORDS 0x200, DevSize 0x2
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7050000, count 400, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:122d9000
  set TERM
  ph data[0]=0:122d9000 (3ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39058740, Count 0x2(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 200, WordsLeft 200
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 400, full size 400
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef2528
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74fec68
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fb4170, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fb4170, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7022000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7022000)
AtapiVirtToPhysAddr_: f7022000 -> 00000000:12319000
  ph data[0]=0:12319000 (fff)
  get Phys(data[n=1+1000]=f7023000)
AtapiVirtToPhysAddr_: f7023000 -> 00000000:1231a000
  set TERM
  ph data[0]=0:12319000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fb4170, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef2528
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9ad00
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:11a21000
  ph data[0]=0:11a21000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:11a22000
  set TERM
  ph data[0]=0:11a21000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef2528
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74fec68
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38faca20, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38faca20, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:11a19000
  ph data[0]=0:11a19000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:11a1a000
  set TERM
  ph data[0]=0:11a19000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38faca20, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef2528
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74fec68
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fb4170, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fb4170, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:11a99000
  ph data[0]=0:11a99000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:11a9a000
  set TERM
  ph data[0]=0:11a99000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fb4170, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x1, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef2528
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff1e0
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc23a0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fc23a0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f6c58000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f6c58000)
AtapiVirtToPhysAddr_: f6c58000 -> 00000000:11ad3000
  ph data[0]=0:11ad3000 (fff)
  get Phys(data[n=1+1000]=f6c59000)
AtapiVirtToPhysAddr_: f6c59000 -> 00000000:11acc000
  ph data[1]=0:11acc000 (fff)
  get Phys(data[n=2+1000]=f6c5a000)
AtapiVirtToPhysAddr_: f6c5a000 -> 00000000:11acd000
  ph data[1]=0:11acc000 (1fff)
  get Phys(data[n=2+2000]=f6c5b000)
AtapiVirtToPhysAddr_: f6c5b000 -> 00000000:11ace000
  ph data[1]=0:11acc000 (2fff)
  get Phys(data[n=2+3000]=f6c5c000)
AtapiVirtToPhysAddr_: f6c5c000 -> 00000000:11ad7000
  ph data[2]=0:11ad7000 (fff)
  get Phys(data[n=3+1000]=f6c5d000)
AtapiVirtToPhysAddr_: f6c5d000 -> 00000000:11ad8000
  ph data[2]=0:11ad7000 (1fff)
  get Phys(data[n=3+2000]=f6c5e000)
AtapiVirtToPhysAddr_: f6c5e000 -> 00000000:11ae1000
  ph data[3]=0:11ae1000 (fff)
  get Phys(data[n=4+1000]=f6c5f000)
AtapiVirtToPhysAddr_: f6c5f000 -> 00000000:11ae2000
  ph data[3]=0:11ae1000 (1fff)
  get Phys(data[n=4+2000]=f6c60000)
AtapiVirtToPhysAddr_: f6c60000 -> 00000000:11adb000
  ph data[4]=0:11adb000 (fff)
  get Phys(data[n=5+1000]=f6c61000)
AtapiVirtToPhysAddr_: f6c61000 -> 00000000:11ad4000
  ph data[5]=0:11ad4000 (fff)
  get Phys(data[n=6+1000]=f6c62000)
AtapiVirtToPhysAddr_: f6c62000 -> 00000000:11ad5000
  ph data[5]=0:11ad4000 (1fff)
  get Phys(data[n=6+2000]=f6c63000)
AtapiVirtToPhysAddr_: f6c63000 -> 00000000:11ad6000
  ph data[5]=0:11ad4000 (2fff)
  get Phys(data[n=6+3000]=f6c64000)
AtapiVirtToPhysAddr_: f6c64000 -> 00000000:11adf000
  ph data[6]=0:11adf000 (fff)
  get Phys(data[n=7+1000]=f6c65000)
AtapiVirtToPhysAddr_: f6c65000 -> 00000000:11ae0000
  ph data[6]=0:11adf000 (1fff)
  get Phys(data[n=7+2000]=f6c66000)
AtapiVirtToPhysAddr_: f6c66000 -> 00000000:11ae9000
  ph data[7]=0:11ae9000 (fff)
  get Phys(data[n=8+1000]=f6c67000)
AtapiVirtToPhysAddr_: f6c67000 -> 00000000:11aea000
  set TERM
  ph data[7]=0:11ae9000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc23a0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x8, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff1e0
** Ide: Command AtaReq 0xb6779048
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc2420, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fc2420, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f6c68000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f6c68000)
AtapiVirtToPhysAddr_: f6c68000 -> 00000000:11ae3000
  ph data[0]=0:11ae3000 (fff)
  get Phys(data[n=1+1000]=f6c69000)
AtapiVirtToPhysAddr_: f6c69000 -> 00000000:11adc000
  ph data[1]=0:11adc000 (fff)
  get Phys(data[n=2+1000]=f6c6a000)
AtapiVirtToPhysAddr_: f6c6a000 -> 00000000:11add000
  ph data[1]=0:11adc000 (1fff)
  get Phys(data[n=2+2000]=f6c6b000)
AtapiVirtToPhysAddr_: f6c6b000 -> 00000000:11ade000
  ph data[1]=0:11adc000 (2fff)
  get Phys(data[n=2+3000]=f6c6c000)
AtapiVirtToPhysAddr_: f6c6c000 -> 00000000:11ae7000
  ph data[2]=0:11ae7000 (fff)
  get Phys(data[n=3+1000]=f6c6d000)
AtapiVirtToPhysAddr_: f6c6d000 -> 00000000:11ae8000
  ph data[2]=0:11ae7000 (1fff)
  get Phys(data[n=3+2000]=f6c6e000)
AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:11af1000
  ph data[3]=0:11af1000 (fff)
  get Phys(data[n=4+1000]=f6c6f000)
AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:11af2000
  ph data[3]=0:11af1000 (1fff)
  get Phys(data[n=4+2000]=f6c70000)
AtapiVirtToPhysAddr_: f6c70000 -> 00000000:11aeb000
  ph data[4]=0:11aeb000 (fff)
  get Phys(data[n=5+1000]=f6c71000)
AtapiVirtToPhysAddr_: f6c71000 -> 00000000:11ae4000
  ph data[5]=0:11ae4000 (fff)
  get Phys(data[n=6+1000]=f6c72000)
AtapiVirtToPhysAddr_: f6c72000 -> 00000000:11ae5000
  ph data[5]=0:11ae4000 (1fff)
  get Phys(data[n=6+2000]=f6c73000)
AtapiVirtToPhysAddr_: f6c73000 -> 00000000:11ae6000
  ph data[5]=0:11ae4000 (2fff)
  get Phys(data[n=6+3000]=f6c74000)
AtapiVirtToPhysAddr_: f6c74000 -> 00000000:11aef000
  ph data[6]=0:11aef000 (fff)
  get Phys(data[n=7+1000]=f6c75000)
AtapiVirtToPhysAddr_: f6c75000 -> 00000000:11af0000
  ph data[6]=0:11aef000 (1fff)
  get Phys(data[n=7+2000]=f6c76000)
AtapiVirtToPhysAddr_: f6c76000 -> 00000000:11af9000
  ph data[7]=0:11af9000 (fff)
  get Phys(data[n=8+1000]=f6c77000)
AtapiVirtToPhysAddr_: f6c77000 -> 00000000:11afa000
  set TERM
  ph data[7]=0:11af9000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff1e0
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc24a0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fc24a0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6c78000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6c78000)
AtapiVirtToPhysAddr_: f6c78000 -> 00000000:11af3000
  ph data[0]=0:11af3000 (fff)
  get Phys(data[n=1+1000]=f6c79000)
AtapiVirtToPhysAddr_: f6c79000 -> 00000000:11aec000
  ph data[1]=0:11aec000 (fff)
  get Phys(data[n=2+1000]=f6c7a000)
AtapiVirtToPhysAddr_: f6c7a000 -> 00000000:11aed000
  ph data[1]=0:11aec000 (1fff)
  get Phys(data[n=2+2000]=f6c7b000)
AtapiVirtToPhysAddr_: f6c7b000 -> 00000000:11aee000
  ph data[1]=0:11aec000 (2fff)
  get Phys(data[n=2+3000]=f6c7c000)
AtapiVirtToPhysAddr_: f6c7c000 -> 00000000:11af7000
  ph data[2]=0:11af7000 (fff)
  get Phys(data[n=3+1000]=f6c7d000)
AtapiVirtToPhysAddr_: f6c7d000 -> 00000000:11af8000
  ph data[2]=0:11af7000 (1fff)
  get Phys(data[n=3+2000]=f6c7e000)
AtapiVirtToPhysAddr_: f6c7e000 -> 00000000:11b01000
  ph data[3]=0:11b01000 (fff)
  get Phys(data[n=4+1000]=f6c7f000)
AtapiVirtToPhysAddr_: f6c7f000 -> 00000000:11b02000
  ph data[3]=0:11b01000 (1fff)
  get Phys(data[n=4+2000]=f6c80000)
AtapiVirtToPhysAddr_: f6c80000 -> 00000000:11afb000
  ph data[4]=0:11afb000 (fff)
  get Phys(data[n=5+1000]=f6c81000)
AtapiVirtToPhysAddr_: f6c81000 -> 00000000:11af4000
  ph data[5]=0:11af4000 (fff)
  get Phys(data[n=6+1000]=f6c82000)
AtapiVirtToPhysAddr_: f6c82000 -> 00000000:11af5000
  ph data[5]=0:11af4000 (1fff)
  get Phys(data[n=6+2000]=f6c83000)
AtapiVirtToPhysAddr_: f6c83000 -> 00000000:11af6000
  ph data[5]=0:11af4000 (2fff)
  get Phys(data[n=6+3000]=f6c84000)
AtapiVirtToPhysAddr_: f6c84000 -> 00000000:11aff000
  ph data[6]=0:11aff000 (fff)
  get Phys(data[n=7+1000]=f6c85000)
AtapiVirtToPhysAddr_: f6c85000 -> 00000000:11b00000
  ph data[6]=0:11aff000 (1fff)
  get Phys(data[n=7+2000]=f6c86000)
AtapiVirtToPhysAddr_: f6c86000 -> 00000000:11b09000
  ph data[7]=0:11b09000 (fff)
  get Phys(data[n=8+1000]=f6c87000)
AtapiVirtToPhysAddr_: f6c87000 -> 00000000:11b0a000
  set TERM
  ph data[7]=0:11b09000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eecb68, CDB 0xb5eecb98, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff1e0
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc2520, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fc2520, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6c88000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6c88000)
AtapiVirtToPhysAddr_: f6c88000 -> 00000000:11b03000
  ph data[0]=0:11b03000 (fff)
  get Phys(data[n=1+1000]=f6c89000)
AtapiVirtToPhysAddr_: f6c89000 -> 00000000:11afc000
  ph data[1]=0:11afc000 (fff)
  get Phys(data[n=2+1000]=f6c8a000)
AtapiVirtToPhysAddr_: f6c8a000 -> 00000000:11afd000
  ph data[1]=0:11afc000 (1fff)
  get Phys(data[n=2+2000]=f6c8b000)
AtapiVirtToPhysAddr_: f6c8b000 -> 00000000:11afe000
  ph data[1]=0:11afc000 (2fff)
  get Phys(data[n=2+3000]=f6c8c000)
AtapiVirtToPhysAddr_: f6c8c000 -> 00000000:11b07000
  ph data[2]=0:11b07000 (fff)
  get Phys(data[n=3+1000]=f6c8d000)
AtapiVirtToPhysAddr_: f6c8d000 -> 00000000:11b08000
  ph data[2]=0:11b07000 (1fff)
  get Phys(data[n=3+2000]=f6c8e000)
AtapiVirtToPhysAddr_: f6c8e000 -> 00000000:11b11000
  ph data[3]=0:11b11000 (fff)
  get Phys(data[n=4+1000]=f6c8f000)
AtapiVirtToPhysAddr_: f6c8f000 -> 00000000:11b12000
  ph data[3]=0:11b11000 (1fff)
  get Phys(data[n=4+2000]=f6c90000)
AtapiVirtToPhysAddr_: f6c90000 -> 00000000:11b0b000
  ph data[4]=0:11b0b000 (fff)
  get Phys(data[n=5+1000]=f6c91000)
AtapiVirtToPhysAddr_: f6c91000 -> 00000000:11b04000
  ph data[5]=0:11b04000 (fff)
  get Phys(data[n=6+1000]=f6c92000)
AtapiVirtToPhysAddr_: f6c92000 -> 00000000:11b05000
  ph data[5]=0:11b04000 (1fff)
  get Phys(data[n=6+2000]=f6c93000)
AtapiVirtToPhysAddr_: f6c93000 -> 00000000:11b06000
  ph data[5]=0:11b04000 (2fff)
  get Phys(data[n=6+3000]=f6c94000)
AtapiVirtToPhysAddr_: f6c94000 -> 00000000:11b0f000
  ph data[6]=0:11b0f000 (fff)
  get Phys(data[n=7+1000]=f6c95000)
AtapiVirtToPhysAddr_: f6c95000 -> 00000000:11b10000
  ph data[6]=0:11b0f000 (1fff)
  get Phys(data[n=7+2000]=f6c96000)
AtapiVirtToPhysAddr_: f6c96000 -> 00000000:11b19000
  ph data[7]=0:11b19000 (fff)
  get Phys(data[n=8+1000]=f6c97000)
AtapiVirtToPhysAddr_: f6c97000 -> 00000000:11b1a000
  set TERM
  ph data[7]=0:11b19000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b5eecb68
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb6782120, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=4
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9b174
** Ide: Command AtaReq 0xb6782120
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6782120: cmd aligned b6782200, d=80
  ahci_cmd_ptr 0xb6782200
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6782200)
AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:11b13000
  ph data[0]=0:11b13000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:11b0c000
  set TERM
  ph data[1]=0:11b0c000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6782200, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 5 request(s)!
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0xb6346750
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: qd=4
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc2420, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x8, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0xb5eed388
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc24a0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x8, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0xb5eecb68
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eecb68, CDB 0xb5eecb98, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc2520, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x8, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eecb68
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eecb68, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eecb68
AtapiInterrupt: NextRequest, srb=0xb5ef24e0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb6782120, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6fdae8c
** Ide: Command AtaReq 0xb6782120
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120
  AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200)
  prd_length 0x2, flags 0x5, base 8e45200
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef24e0
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff60c
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc23a0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fc23a0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7022000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7022000)
AtapiVirtToPhysAddr_: f7022000 -> 00000000:10873000
  ph data[0]=0:10873000 (fff)
  get Phys(data[n=1+1000]=f7023000)
AtapiVirtToPhysAddr_: f7023000 -> 00000000:10874000
  set TERM
  ph data[0]=0:10873000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc23a0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef24e0
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74fecec
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390585e0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390585e0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:1087d000
  ph data[0]=0:1087d000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:1087e000
  set TERM
  ph data[0]=0:1087d000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390585e0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef24e0
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9ad00
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:108bd000
  ph data[0]=0:108bd000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:108be000
  set TERM
  ph data[0]=0:108bd000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef24e0
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9ad00
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:108fd000
  ph data[0]=0:108fd000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:108fe000
  set TERM
  ph data[0]=0:108fd000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef24e0
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9b230
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39058700, OrigWordsRequested 0x400, DevSize 0x4
IdeReadWrite (REQ): Starting sector is 39058700, Number of WORDS 0x400, DevSize 0x4
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7050000, count 800, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:1097d000
  set TERM
  ph data[0]=0:1097d000 (7ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39058700, Count 0x4(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6782120, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff40c
** Ide: Command AtaReq 0xb6782120
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586b0, OrigWordsRequested 0xe00, DevSize 0xe
IdeReadWrite (REQ): Starting sector is 390586b0, Number of WORDS 0xe00, DevSize 0xe
  AtaReq 0xb6782120: cmd aligned b6782200, d=80
  ahci_cmd_ptr 0xb6782200
AtapiDmaSetup: mode 0x0, data f7022000, count 1c00, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6782200)
AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200
  get Phys(data[0]=f7022000)
AtapiVirtToPhysAddr_: f7022000 -> 00000000:1093d000
  ph data[0]=0:1093d000 (fff)
  get Phys(data[n=1+1000]=f7023000)
AtapiVirtToPhysAddr_: f7023000 -> 00000000:1093e000
  set TERM
  ph data[0]=0:1093d000 (1bff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6782200, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 400, WordsLeft 400
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 800, full size 800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0xb5eed388
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6782120, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf74ff310
** Ide: Command AtaReq 0xb6782120
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586b0, Count 0xe(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120
  AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200)
  prd_length 0x1, flags 0x5, base 8e45200
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered e00, WordsLeft e00
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 1c00, full size 1c00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef24e0
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9ad00
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:109bd000
  ph data[0]=0:109bd000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:109be000
  set TERM
  ph data[0]=0:109bd000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef24e0
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9b174
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:109fd000
  ph data[0]=0:109fd000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:109fe000
  set TERM
  ph data[0]=0:109fd000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef24e0
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9ad00
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:10a3d000
  ph data[0]=0:10a3d000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:10a3e000
  set TERM
  ph data[0]=0:10a3d000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef24e0
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9ad00
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7050000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:10a7d000
  ph data[0]=0:10a7d000 (fff)
  get Phys(data[n=1+1000]=f7051000)
AtapiVirtToPhysAddr_: f7051000 -> 00000000:10a7e000
  set TERM
  ph data[0]=0:10a7d000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef24e0
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9b230
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39058720, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 39058720, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f7050000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f7050000)
AtapiVirtToPhysAddr_: f7050000 -> 00000000:10abd000
  set TERM
  ph data[0]=0:10abd000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39058720, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef24e0
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9b600
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc25a0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fc25a0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6ffa000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6ffa000)
AtapiVirtToPhysAddr_: f6ffa000 -> 00000000:10b91000
  ph data[0]=0:10b91000 (fff)
  get Phys(data[n=1+1000]=f6ffb000)
AtapiVirtToPhysAddr_: f6ffb000 -> 00000000:10b82000
  ph data[1]=0:10b82000 (fff)
  get Phys(data[n=2+1000]=f6ffc000)
AtapiVirtToPhysAddr_: f6ffc000 -> 00000000:10b83000
  ph data[1]=0:10b82000 (1fff)
  get Phys(data[n=2+2000]=f6ffd000)
AtapiVirtToPhysAddr_: f6ffd000 -> 00000000:10b84000
  ph data[1]=0:10b82000 (2fff)
  get Phys(data[n=2+3000]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:10b85000
  ph data[1]=0:10b82000 (3fff)
  get Phys(data[n=2+4000]=f6fff000)
AtapiVirtToPhysAddr_: f6fff000 -> 00000000:10b8e000
  ph data[2]=0:10b8e000 (fff)
  get Phys(data[n=3+1000]=f7000000)
AtapiVirtToPhysAddr_: f7000000 -> 00000000:10b8f000
  ph data[2]=0:10b8e000 (1fff)
  get Phys(data[n=3+2000]=f7001000)
AtapiVirtToPhysAddr_: f7001000 -> 00000000:10b78000
  ph data[3]=0:10b78000 (fff)
  get Phys(data[n=4+1000]=f7002000)
AtapiVirtToPhysAddr_: f7002000 -> 00000000:10b99000
  ph data[4]=0:10b99000 (fff)
  get Phys(data[n=5+1000]=f7003000)
AtapiVirtToPhysAddr_: f7003000 -> 00000000:10b8a000
  ph data[5]=0:10b8a000 (fff)
  get Phys(data[n=6+1000]=f7004000)
AtapiVirtToPhysAddr_: f7004000 -> 00000000:10b8b000
  ph data[5]=0:10b8a000 (1fff)
  get Phys(data[n=6+2000]=f7005000)
AtapiVirtToPhysAddr_: f7005000 -> 00000000:10b8c000
  ph data[5]=0:10b8a000 (2fff)
  get Phys(data[n=6+3000]=f7006000)
AtapiVirtToPhysAddr_: f7006000 -> 00000000:10b8d000
  ph data[5]=0:10b8a000 (3fff)
  get Phys(data[n=6+4000]=f7007000)
AtapiVirtToPhysAddr_: f7007000 -> 00000000:10b96000
  ph data[6]=0:10b96000 (fff)
  get Phys(data[n=7+1000]=f7008000)
AtapiVirtToPhysAddr_: f7008000 -> 00000000:10b97000
  ph data[6]=0:10b96000 (1fff)
  get Phys(data[n=7+2000]=f7009000)
AtapiVirtToPhysAddr_: f7009000 -> 00000000:10b80000
  set TERM
  ph data[7]=0:10b80000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc25a0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x8, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6782120, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9b600
** Ide: Command AtaReq 0xb6782120
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc2620, OrigWordsRequested 0xc00, DevSize 0xc
IdeReadWrite (REQ): Starting sector is 38fc2620, Number of WORDS 0xc00, DevSize 0xc
  AtaReq 0xb6782120: cmd aligned b6782200, d=80
  ahci_cmd_ptr 0xb6782200
AtapiDmaSetup: mode 0x0, data f700a000, count 1800, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6782200)
AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200
  get Phys(data[0]=f700a000)
AtapiVirtToPhysAddr_: f700a000 -> 00000000:10ba1000
  ph data[0]=0:10ba1000 (fff)
  get Phys(data[n=1+1000]=f700b000)
AtapiVirtToPhysAddr_: f700b000 -> 00000000:10b92000
  set TERM
  ph data[1]=0:10b92000 (7ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6782200, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0xb5eed388
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6782120, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf705fad8
** Ide: Command AtaReq 0xb6782120
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc2620, Count 0xc(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120
  AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200)
  prd_length 0x2, flags 0x5, base 8e45200
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered c00, WordsLeft c00
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 1800, full size 1800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(win32ss/user/ntuser/desktop.c:3221) err: Attempted to change thread desktop although the thread has windows!
(drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb
(drivers/usb/usbehci/hardware.cpp:1321) CStatus b
(win32ss/user/ntuser/desktop.c:1317) err: ptiLastInput is CLEARED!!
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef24e0
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9ad00
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6ff0000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6ff0000)
AtapiVirtToPhysAddr_: f6ff0000 -> 00000000:10bcb000
  ph data[0]=0:10bcb000 (fff)
  get Phys(data[n=1+1000]=f6ff1000)
AtapiVirtToPhysAddr_: f6ff1000 -> 00000000:10bcc000
  set TERM
  ph data[0]=0:10bcb000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6782120, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf700b5c0
** Ide: Command AtaReq 0xb6782120
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39008170, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39008170, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6782120: cmd aligned b6782200, d=80
  ahci_cmd_ptr 0xb6782200
AtapiDmaSetup: mode 0x0, data f6c54000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6782200)
AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200
  get Phys(data[0]=f6c54000)
AtapiVirtToPhysAddr_: f6c54000 -> 00000000:27461000
  ph data[0]=0:27461000 (fff)
  get Phys(data[n=1+1000]=f6c55000)
AtapiVirtToPhysAddr_: f6c55000 -> 00000000:27462000
  ph data[0]=0:27461000 (1fff)
  get Phys(data[n=1+2000]=f6c56000)
AtapiVirtToPhysAddr_: f6c56000 -> 00000000:27463000
  ph data[0]=0:27461000 (2fff)
  get Phys(data[n=1+3000]=f6c57000)
AtapiVirtToPhysAddr_: f6c57000 -> 00000000:2746c000
  ph data[1]=0:2746c000 (fff)
  get Phys(data[n=2+1000]=f6c58000)
AtapiVirtToPhysAddr_: f6c58000 -> 00000000:2746d000
  ph data[1]=0:2746c000 (1fff)
  get Phys(data[n=2+2000]=f6c59000)
AtapiVirtToPhysAddr_: f6c59000 -> 00000000:27466000
  ph data[2]=0:27466000 (fff)
  get Phys(data[n=3+1000]=f6c5a000)
AtapiVirtToPhysAddr_: f6c5a000 -> 00000000:2745f000
  ph data[3]=0:2745f000 (fff)
  get Phys(data[n=4+1000]=f6c5b000)
AtapiVirtToPhysAddr_: f6c5b000 -> 00000000:27468000
  ph data[4]=0:27468000 (fff)
  get Phys(data[n=5+1000]=f6c5c000)
AtapiVirtToPhysAddr_: f6c5c000 -> 00000000:27469000
  ph data[4]=0:27468000 (1fff)
  get Phys(data[n=5+2000]=f6c5d000)
AtapiVirtToPhysAddr_: f6c5d000 -> 00000000:2746a000
  ph data[4]=0:27468000 (2fff)
  get Phys(data[n=5+3000]=f6c5e000)
AtapiVirtToPhysAddr_: f6c5e000 -> 00000000:2746b000
  ph data[4]=0:27468000 (3fff)
  get Phys(data[n=5+4000]=f6c5f000)
AtapiVirtToPhysAddr_: f6c5f000 -> 00000000:27474000
  ph data[5]=0:27474000 (fff)
  get Phys(data[n=6+1000]=f6c60000)
AtapiVirtToPhysAddr_: f6c60000 -> 00000000:27475000
  ph data[5]=0:27474000 (1fff)
  get Phys(data[n=6+2000]=f6c61000)
AtapiVirtToPhysAddr_: f6c61000 -> 00000000:2746e000
  ph data[6]=0:2746e000 (fff)
  get Phys(data[n=7+1000]=f6c62000)
AtapiVirtToPhysAddr_: f6c62000 -> 00000000:27467000
  ph data[7]=0:27467000 (fff)
  get Phys(data[n=8+1000]=f6c63000)
AtapiVirtToPhysAddr_: f6c63000 -> 00000000:27470000
  set TERM
  ph data[8]=0:27470000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6782200, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf700b5c0
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 390081f0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390081f0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6c64000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6c64000)
AtapiVirtToPhysAddr_: f6c64000 -> 00000000:27471000
  ph data[0]=0:27471000 (fff)
  get Phys(data[n=1+1000]=f6c65000)
AtapiVirtToPhysAddr_: f6c65000 -> 00000000:27472000
  ph data[0]=0:27471000 (1fff)
  get Phys(data[n=1+2000]=f6c66000)
AtapiVirtToPhysAddr_: f6c66000 -> 00000000:27473000
  ph data[0]=0:27471000 (2fff)
  get Phys(data[n=1+3000]=f6c67000)
AtapiVirtToPhysAddr_: f6c67000 -> 00000000:2747c000
  ph data[1]=0:2747c000 (fff)
  get Phys(data[n=2+1000]=f6c68000)
AtapiVirtToPhysAddr_: f6c68000 -> 00000000:2747d000
  ph data[1]=0:2747c000 (1fff)
  get Phys(data[n=2+2000]=f6c69000)
AtapiVirtToPhysAddr_: f6c69000 -> 00000000:27476000
  ph data[2]=0:27476000 (fff)
  get Phys(data[n=3+1000]=f6c6a000)
AtapiVirtToPhysAddr_: f6c6a000 -> 00000000:2746f000
  ph data[3]=0:2746f000 (fff)
  get Phys(data[n=4+1000]=f6c6b000)
AtapiVirtToPhysAddr_: f6c6b000 -> 00000000:27478000
  ph data[4]=0:27478000 (fff)
  get Phys(data[n=5+1000]=f6c6c000)
AtapiVirtToPhysAddr_: f6c6c000 -> 00000000:27479000
  ph data[4]=0:27478000 (1fff)
  get Phys(data[n=5+2000]=f6c6d000)
AtapiVirtToPhysAddr_: f6c6d000 -> 00000000:2747a000
  ph data[4]=0:27478000 (2fff)
  get Phys(data[n=5+3000]=f6c6e000)
AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:2747b000
  ph data[4]=0:27478000 (3fff)
  get Phys(data[n=5+4000]=f6c6f000)
AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:27484000
  ph data[5]=0:27484000 (fff)
  get Phys(data[n=6+1000]=f6c70000)
AtapiVirtToPhysAddr_: f6c70000 -> 00000000:27485000
  ph data[5]=0:27484000 (1fff)
  get Phys(data[n=6+2000]=f6c71000)
AtapiVirtToPhysAddr_: f6c71000 -> 00000000:2747e000
  ph data[6]=0:2747e000 (fff)
  get Phys(data[n=7+1000]=f6c72000)
AtapiVirtToPhysAddr_: f6c72000 -> 00000000:27477000
  ph data[7]=0:27477000 (fff)
  get Phys(data[n=8+1000]=f6c73000)
AtapiVirtToPhysAddr_: f6c73000 -> 00000000:27480000
  set TERM
  ph data[8]=0:27480000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6779048, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf700b5c0
** Ide: Command AtaReq 0xb6779048
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39008270, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39008270, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f6c74000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f6c74000)
AtapiVirtToPhysAddr_: f6c74000 -> 00000000:27481000
  ph data[0]=0:27481000 (fff)
  get Phys(data[n=1+1000]=f6c75000)
AtapiVirtToPhysAddr_: f6c75000 -> 00000000:27482000
  ph data[0]=0:27481000 (1fff)
  get Phys(data[n=1+2000]=f6c76000)
AtapiVirtToPhysAddr_: f6c76000 -> 00000000:27483000
  ph data[0]=0:27481000 (2fff)
  get Phys(data[n=1+3000]=f6c77000)
AtapiVirtToPhysAddr_: f6c77000 -> 00000000:2748c000
  ph data[1]=0:2748c000 (fff)
  get Phys(data[n=2+1000]=f6c78000)
AtapiVirtToPhysAddr_: f6c78000 -> 00000000:2748d000
  ph data[1]=0:2748c000 (1fff)
  get Phys(data[n=2+2000]=f6c79000)
AtapiVirtToPhysAddr_: f6c79000 -> 00000000:27486000
  ph data[2]=0:27486000 (fff)
  get Phys(data[n=3+1000]=f6c7a000)
AtapiVirtToPhysAddr_: f6c7a000 -> 00000000:2747f000
  ph data[3]=0:2747f000 (fff)
  get Phys(data[n=4+1000]=f6c7b000)
AtapiVirtToPhysAddr_: f6c7b000 -> 00000000:27488000
  ph data[4]=0:27488000 (fff)
  get Phys(data[n=5+1000]=f6c7c000)
AtapiVirtToPhysAddr_: f6c7c000 -> 00000000:27489000
  ph data[4]=0:27488000 (1fff)
  get Phys(data[n=5+2000]=f6c7d000)
AtapiVirtToPhysAddr_: f6c7d000 -> 00000000:2748a000
  ph data[4]=0:27488000 (2fff)
  get Phys(data[n=5+3000]=f6c7e000)
AtapiVirtToPhysAddr_: f6c7e000 -> 00000000:2748b000
  ph data[4]=0:27488000 (3fff)
  get Phys(data[n=5+4000]=f6c7f000)
AtapiVirtToPhysAddr_: f6c7f000 -> 00000000:27494000
  ph data[5]=0:27494000 (fff)
  get Phys(data[n=6+1000]=f6c80000)
AtapiVirtToPhysAddr_: f6c80000 -> 00000000:27495000
  ph data[5]=0:27494000 (1fff)
  get Phys(data[n=6+2000]=f6c81000)
AtapiVirtToPhysAddr_: f6c81000 -> 00000000:2748e000
  ph data[6]=0:2748e000 (fff)
  get Phys(data[n=7+1000]=f6c82000)
AtapiVirtToPhysAddr_: f6c82000 -> 00000000:27487000
  ph data[7]=0:27487000 (fff)
  get Phys(data[n=8+1000]=f6c83000)
AtapiVirtToPhysAddr_: f6c83000 -> 00000000:27490000
  set TERM
  ph data[8]=0:27490000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ee6b08, CDB 0xb5ee6b38, AtaReq 0xb6777018, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=4
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf700b5c0
** Ide: Command AtaReq 0xb6777018
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 390082f0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390082f0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f6c84000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f6c84000)
AtapiVirtToPhysAddr_: f6c84000 -> 00000000:27491000
  ph data[0]=0:27491000 (fff)
  get Phys(data[n=1+1000]=f6c85000)
AtapiVirtToPhysAddr_: f6c85000 -> 00000000:27492000
  ph data[0]=0:27491000 (1fff)
  get Phys(data[n=1+2000]=f6c86000)
AtapiVirtToPhysAddr_: f6c86000 -> 00000000:27493000
  ph data[0]=0:27491000 (2fff)
  get Phys(data[n=1+3000]=f6c87000)
AtapiVirtToPhysAddr_: f6c87000 -> 00000000:2749c000
  ph data[1]=0:2749c000 (fff)
  get Phys(data[n=2+1000]=f6c88000)
AtapiVirtToPhysAddr_: f6c88000 -> 00000000:2749d000
  ph data[1]=0:2749c000 (1fff)
  get Phys(data[n=2+2000]=f6c89000)
AtapiVirtToPhysAddr_: f6c89000 -> 00000000:27496000
  ph data[2]=0:27496000 (fff)
  get Phys(data[n=3+1000]=f6c8a000)
AtapiVirtToPhysAddr_: f6c8a000 -> 00000000:2748f000
  ph data[3]=0:2748f000 (fff)
  get Phys(data[n=4+1000]=f6c8b000)
AtapiVirtToPhysAddr_: f6c8b000 -> 00000000:27498000
  ph data[4]=0:27498000 (fff)
  get Phys(data[n=5+1000]=f6c8c000)
AtapiVirtToPhysAddr_: f6c8c000 -> 00000000:27499000
  ph data[4]=0:27498000 (1fff)
  get Phys(data[n=5+2000]=f6c8d000)
AtapiVirtToPhysAddr_: f6c8d000 -> 00000000:2749a000
  ph data[4]=0:27498000 (2fff)
  get Phys(data[n=5+3000]=f6c8e000)
AtapiVirtToPhysAddr_: f6c8e000 -> 00000000:2749b000
  ph data[4]=0:27498000 (3fff)
  get Phys(data[n=5+4000]=f6c8f000)
AtapiVirtToPhysAddr_: f6c8f000 -> 00000000:274a4000
  ph data[5]=0:274a4000 (fff)
  get Phys(data[n=6+1000]=f6c90000)
AtapiVirtToPhysAddr_: f6c90000 -> 00000000:274a5000
  ph data[5]=0:274a4000 (1fff)
  get Phys(data[n=6+2000]=f6c91000)
AtapiVirtToPhysAddr_: f6c91000 -> 00000000:2749e000
  ph data[6]=0:2749e000 (fff)
  get Phys(data[n=7+1000]=f6c92000)
AtapiVirtToPhysAddr_: f6c92000 -> 00000000:27497000
  ph data[7]=0:27497000 (fff)
  get Phys(data[n=8+1000]=f6c93000)
AtapiVirtToPhysAddr_: f6c93000 -> 00000000:274a0000
  set TERM
  ph data[8]=0:274a0000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 5 request(s)!
AtapiStartIo: next Srb b5ee6b08
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0xb5ee6b08
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ee6b08, CDB 0xb5ee6b38, AtaReq 0xb6777018, SCmd 0x2a
UniataNeedQueueing: qd=4
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390082f0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x9, flags 0x45, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ee6b08
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ee6b08, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ee6b08
AtapiInterrupt: NextRequest, srb=0xb5ef2528
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6779048, SCmd 0x2a
UniataNeedQueueing: qd=3
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9aec8
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39008270, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x9, flags 0x45, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0xb6346750
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf766566c
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390081f0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x9, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0xb5eed388
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6782120, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf766557c
** Ide: Command AtaReq 0xb6782120
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39008170, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120
  AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200)
  prd_length 0x9, flags 0x45, base 8e45200
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7665468
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3960b460, OrigWordsRequested 0x7b00, DevSize 0x7b
IdeReadWrite (REQ): Starting sector is 3960b460, Number of WORDS 0x7b00, DevSize 0x7b
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6c44000, count f600, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6c44000)
AtapiVirtToPhysAddr_: f6c44000 -> 00000000:0c7b3000
  ph data[0]=0:c7b3000 (fff)
  get Phys(data[n=1+1000]=f6c45000)
AtapiVirtToPhysAddr_: f6c45000 -> 00000000:0c7b4000
  ph data[0]=0:c7b3000 (1fff)
  get Phys(data[n=1+2000]=f6c46000)
AtapiVirtToPhysAddr_: f6c46000 -> 00000000:0c7b5000
  ph data[0]=0:c7b3000 (2fff)
  get Phys(data[n=1+3000]=f6c47000)
AtapiVirtToPhysAddr_: f6c47000 -> 00000000:0c7b6000
  ph data[0]=0:c7b3000 (3fff)
  get Phys(data[n=1+4000]=f6c48000)
AtapiVirtToPhysAddr_: f6c48000 -> 00000000:0c7b7000
  ph data[0]=0:c7b3000 (4fff)
  get Phys(data[n=1+5000]=f6c49000)
AtapiVirtToPhysAddr_: f6c49000 -> 00000000:0c7b8000
  ph data[0]=0:c7b3000 (5fff)
  get Phys(data[n=1+6000]=f6c4a000)
AtapiVirtToPhysAddr_: f6c4a000 -> 00000000:0c7b9000
  ph data[0]=0:c7b3000 (6fff)
  get Phys(data[n=1+7000]=f6c4b000)
AtapiVirtToPhysAddr_: f6c4b000 -> 00000000:0c7b2000
  ph data[1]=0:c7b2000 (fff)
  get Phys(data[n=2+1000]=f6c4c000)
AtapiVirtToPhysAddr_: f6c4c000 -> 00000000:0c7bb000
  ph data[2]=0:c7bb000 (fff)
  get Phys(data[n=3+1000]=f6c4d000)
AtapiVirtToPhysAddr_: f6c4d000 -> 00000000:0c7bc000
  ph data[2]=0:c7bb000 (1fff)
  get Phys(data[n=3+2000]=f6c4e000)
AtapiVirtToPhysAddr_: f6c4e000 -> 00000000:0c7bd000
  ph data[2]=0:c7bb000 (2fff)
  get Phys(data[n=3+3000]=f6c4f000)
AtapiVirtToPhysAddr_: f6c4f000 -> 00000000:0c7be000
  ph data[2]=0:c7bb000 (3fff)
  get Phys(data[n=3+4000]=f6c50000)
AtapiVirtToPhysAddr_: f6c50000 -> 00000000:0c7bf000
  ph data[2]=0:c7bb000 (4fff)
  get Phys(data[n=3+5000]=f6c51000)
AtapiVirtToPhysAddr_: f6c51000 -> 00000000:0c7c0000
  ph data[2]=0:c7bb000 (5fff)
  get Phys(data[n=3+6000]=f6c52000)
AtapiVirtToPhysAddr_: f6c52000 -> 00000000:0c7c1000
  ph data[2]=0:c7bb000 (6fff)
  get Phys(data[n=3+7000]=f6c53000)
AtapiVirtToPhysAddr_: f6c53000 -> 00000000:0c7ba000
  set TERM
  ph data[3]=0:c7ba000 (5ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0xb6346750
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf766536c
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3960b460, Count 0x7b(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x4, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6782120, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9b174
** Ide: Command AtaReq 0xb6782120
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6782120: cmd aligned b6782200, d=80
  ahci_cmd_ptr 0xb6782200
AtapiDmaSetup: mode 0x0, data f6ff0000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6782200)
AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200
  get Phys(data[0]=f6ff0000)
AtapiVirtToPhysAddr_: f6ff0000 -> 00000000:0c7f3000
  ph data[0]=0:c7f3000 (fff)
  get Phys(data[n=1+1000]=f6ff1000)
AtapiVirtToPhysAddr_: f6ff1000 -> 00000000:0c7f4000
  set TERM
  ph data[0]=0:c7f3000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6782200, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 7b00, WordsLeft 7b00
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered f600, full size f600
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0xb5eed388
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6782120, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6782120
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120
  AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200)
  prd_length 0x1, flags 0x5, base 8e45200
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5eed388
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9ad00
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6ff0000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6ff0000)
AtapiVirtToPhysAddr_: f6ff0000 -> 00000000:0bc4b000
  ph data[0]=0:bc4b000 (fff)
  get Phys(data[n=1+1000]=f6ff1000)
AtapiVirtToPhysAddr_: f6ff1000 -> 00000000:0bc4c000
  set TERM
  ph data[0]=0:bc4b000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb5eed388
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf70035c0
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39008170, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39008170, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6c54000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6c54000)
AtapiVirtToPhysAddr_: f6c54000 -> 00000000:27461000
  ph data[0]=0:27461000 (fff)
  get Phys(data[n=1+1000]=f6c55000)
AtapiVirtToPhysAddr_: f6c55000 -> 00000000:27462000
  ph data[0]=0:27461000 (1fff)
  get Phys(data[n=1+2000]=f6c56000)
AtapiVirtToPhysAddr_: f6c56000 -> 00000000:27463000
  ph data[0]=0:27461000 (2fff)
  get Phys(data[n=1+3000]=f6c57000)
AtapiVirtToPhysAddr_: f6c57000 -> 00000000:2746c000
  ph data[1]=0:2746c000 (fff)
  get Phys(data[n=2+1000]=f6c58000)
AtapiVirtToPhysAddr_: f6c58000 -> 00000000:2746d000
  ph data[1]=0:2746c000 (1fff)
  get Phys(data[n=2+2000]=f6c59000)
AtapiVirtToPhysAddr_: f6c59000 -> 00000000:27466000
  ph data[2]=0:27466000 (fff)
  get Phys(data[n=3+1000]=f6c5a000)
AtapiVirtToPhysAddr_: f6c5a000 -> 00000000:2745f000
  ph data[3]=0:2745f000 (fff)
  get Phys(data[n=4+1000]=f6c5b000)
AtapiVirtToPhysAddr_: f6c5b000 -> 00000000:27468000
  ph data[4]=0:27468000 (fff)
  get Phys(data[n=5+1000]=f6c5c000)
AtapiVirtToPhysAddr_: f6c5c000 -> 00000000:27469000
  ph data[4]=0:27468000 (1fff)
  get Phys(data[n=5+2000]=f6c5d000)
AtapiVirtToPhysAddr_: f6c5d000 -> 00000000:2746a000
  ph data[4]=0:27468000 (2fff)
  get Phys(data[n=5+3000]=f6c5e000)
AtapiVirtToPhysAddr_: f6c5e000 -> 00000000:2746b000
  ph data[4]=0:27468000 (3fff)
  get Phys(data[n=5+4000]=f6c5f000)
AtapiVirtToPhysAddr_: f6c5f000 -> 00000000:27474000
  ph data[5]=0:27474000 (fff)
  get Phys(data[n=6+1000]=f6c60000)
AtapiVirtToPhysAddr_: f6c60000 -> 00000000:27475000
  ph data[5]=0:27474000 (1fff)
  get Phys(data[n=6+2000]=f6c61000)
AtapiVirtToPhysAddr_: f6c61000 -> 00000000:2746e000
  ph data[6]=0:2746e000 (fff)
  get Phys(data[n=7+1000]=f6c62000)
AtapiVirtToPhysAddr_: f6c62000 -> 00000000:27467000
  ph data[7]=0:27467000 (fff)
  get Phys(data[n=8+1000]=f6c63000)
AtapiVirtToPhysAddr_: f6c63000 -> 00000000:27470000
  set TERM
  ph data[8]=0:27470000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39008170, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x9, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6782120, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf70035c0
** Ide: Command AtaReq 0xb6782120
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 390081f0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390081f0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6782120: cmd aligned b6782200, d=80
  ahci_cmd_ptr 0xb6782200
AtapiDmaSetup: mode 0x0, data f6c64000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6782200)
AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200
  get Phys(data[0]=f6c64000)
AtapiVirtToPhysAddr_: f6c64000 -> 00000000:27471000
  ph data[0]=0:27471000 (fff)
  get Phys(data[n=1+1000]=f6c65000)
AtapiVirtToPhysAddr_: f6c65000 -> 00000000:27472000
  ph data[0]=0:27471000 (1fff)
  get Phys(data[n=1+2000]=f6c66000)
AtapiVirtToPhysAddr_: f6c66000 -> 00000000:27473000
  ph data[0]=0:27471000 (2fff)
  get Phys(data[n=1+3000]=f6c67000)
AtapiVirtToPhysAddr_: f6c67000 -> 00000000:2747c000
  ph data[1]=0:2747c000 (fff)
  get Phys(data[n=2+1000]=f6c68000)
AtapiVirtToPhysAddr_: f6c68000 -> 00000000:2747d000
  ph data[1]=0:2747c000 (1fff)
  get Phys(data[n=2+2000]=f6c69000)
AtapiVirtToPhysAddr_: f6c69000 -> 00000000:27476000
  ph data[2]=0:27476000 (fff)
  get Phys(data[n=3+1000]=f6c6a000)
AtapiVirtToPhysAddr_: f6c6a000 -> 00000000:2746f000
  ph data[3]=0:2746f000 (fff)
  get Phys(data[n=4+1000]=f6c6b000)
AtapiVirtToPhysAddr_: f6c6b000 -> 00000000:27478000
  ph data[4]=0:27478000 (fff)
  get Phys(data[n=5+1000]=f6c6c000)
AtapiVirtToPhysAddr_: f6c6c000 -> 00000000:27479000
  ph data[4]=0:27478000 (1fff)
  get Phys(data[n=5+2000]=f6c6d000)
AtapiVirtToPhysAddr_: f6c6d000 -> 00000000:2747a000
  ph data[4]=0:27478000 (2fff)
  get Phys(data[n=5+3000]=f6c6e000)
AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:2747b000
  ph data[4]=0:27478000 (3fff)
  get Phys(data[n=5+4000]=f6c6f000)
AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:27484000
  ph data[5]=0:27484000 (fff)
  get Phys(data[n=6+1000]=f6c70000)
AtapiVirtToPhysAddr_: f6c70000 -> 00000000:27485000
  ph data[5]=0:27484000 (1fff)
  get Phys(data[n=6+2000]=f6c71000)
AtapiVirtToPhysAddr_: f6c71000 -> 00000000:2747e000
  ph data[6]=0:2747e000 (fff)
  get Phys(data[n=7+1000]=f6c72000)
AtapiVirtToPhysAddr_: f6c72000 -> 00000000:27477000
  ph data[7]=0:27477000 (fff)
  get Phys(data[n=8+1000]=f6c73000)
AtapiVirtToPhysAddr_: f6c73000 -> 00000000:27480000
  set TERM
  ph data[8]=0:27480000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6782200, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ee6b08, CDB 0xb5ee6b38, AtaReq 0xb6779048, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf70035c0
** Ide: Command AtaReq 0xb6779048
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39008270, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39008270, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f6c74000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f6c74000)
AtapiVirtToPhysAddr_: f6c74000 -> 00000000:27481000
  ph data[0]=0:27481000 (fff)
  get Phys(data[n=1+1000]=f6c75000)
AtapiVirtToPhysAddr_: f6c75000 -> 00000000:27482000
  ph data[0]=0:27481000 (1fff)
  get Phys(data[n=1+2000]=f6c76000)
AtapiVirtToPhysAddr_: f6c76000 -> 00000000:27483000
  ph data[0]=0:27481000 (2fff)
  get Phys(data[n=1+3000]=f6c77000)
AtapiVirtToPhysAddr_: f6c77000 -> 00000000:2748c000
  ph data[1]=0:2748c000 (fff)
  get Phys(data[n=2+1000]=f6c78000)
AtapiVirtToPhysAddr_: f6c78000 -> 00000000:2748d000
  ph data[1]=0:2748c000 (1fff)
  get Phys(data[n=2+2000]=f6c79000)
AtapiVirtToPhysAddr_: f6c79000 -> 00000000:27486000
  ph data[2]=0:27486000 (fff)
  get Phys(data[n=3+1000]=f6c7a000)
AtapiVirtToPhysAddr_: f6c7a000 -> 00000000:2747f000
  ph data[3]=0:2747f000 (fff)
  get Phys(data[n=4+1000]=f6c7b000)
AtapiVirtToPhysAddr_: f6c7b000 -> 00000000:27488000
  ph data[4]=0:27488000 (fff)
  get Phys(data[n=5+1000]=f6c7c000)
AtapiVirtToPhysAddr_: f6c7c000 -> 00000000:27489000
  ph data[4]=0:27488000 (1fff)
  get Phys(data[n=5+2000]=f6c7d000)
AtapiVirtToPhysAddr_: f6c7d000 -> 00000000:2748a000
  ph data[4]=0:27488000 (2fff)
  get Phys(data[n=5+3000]=f6c7e000)
AtapiVirtToPhysAddr_: f6c7e000 -> 00000000:2748b000
  ph data[4]=0:27488000 (3fff)
  get Phys(data[n=5+4000]=f6c7f000)
AtapiVirtToPhysAddr_: f6c7f000 -> 00000000:27494000
  ph data[5]=0:27494000 (fff)
  get Phys(data[n=6+1000]=f6c80000)
AtapiVirtToPhysAddr_: f6c80000 -> 00000000:27495000
  ph data[5]=0:27494000 (1fff)
  get Phys(data[n=6+2000]=f6c81000)
AtapiVirtToPhysAddr_: f6c81000 -> 00000000:2748e000
  ph data[6]=0:2748e000 (fff)
  get Phys(data[n=7+1000]=f6c82000)
AtapiVirtToPhysAddr_: f6c82000 -> 00000000:27487000
  ph data[7]=0:27487000 (fff)
  get Phys(data[n=8+1000]=f6c83000)
AtapiVirtToPhysAddr_: f6c83000 -> 00000000:27490000
  set TERM
  ph data[8]=0:27490000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b5ee6b08
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0xb5ef2528
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6782120, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7003494
** Ide: Command AtaReq 0xb6782120
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390081f0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120
  AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200)
  prd_length 0x9, flags 0x45, base 8e45200
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf70035c0
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 390082f0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390082f0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6c84000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6c84000)
AtapiVirtToPhysAddr_: f6c84000 -> 00000000:27491000
  ph data[0]=0:27491000 (fff)
  get Phys(data[n=1+1000]=f6c85000)
AtapiVirtToPhysAddr_: f6c85000 -> 00000000:27492000
  ph data[0]=0:27491000 (1fff)
  get Phys(data[n=1+2000]=f6c86000)
AtapiVirtToPhysAddr_: f6c86000 -> 00000000:27493000
  ph data[0]=0:27491000 (2fff)
  get Phys(data[n=1+3000]=f6c87000)
AtapiVirtToPhysAddr_: f6c87000 -> 00000000:2749c000
  ph data[1]=0:2749c000 (fff)
  get Phys(data[n=2+1000]=f6c88000)
AtapiVirtToPhysAddr_: f6c88000 -> 00000000:2749d000
  ph data[1]=0:2749c000 (1fff)
  get Phys(data[n=2+2000]=f6c89000)
AtapiVirtToPhysAddr_: f6c89000 -> 00000000:27496000
  ph data[2]=0:27496000 (fff)
  get Phys(data[n=3+1000]=f6c8a000)
AtapiVirtToPhysAddr_: f6c8a000 -> 00000000:2748f000
  ph data[3]=0:2748f000 (fff)
  get Phys(data[n=4+1000]=f6c8b000)
AtapiVirtToPhysAddr_: f6c8b000 -> 00000000:27498000
  ph data[4]=0:27498000 (fff)
  get Phys(data[n=5+1000]=f6c8c000)
AtapiVirtToPhysAddr_: f6c8c000 -> 00000000:27499000
  ph data[4]=0:27498000 (1fff)
  get Phys(data[n=5+2000]=f6c8d000)
AtapiVirtToPhysAddr_: f6c8d000 -> 00000000:2749a000
  ph data[4]=0:27498000 (2fff)
  get Phys(data[n=5+3000]=f6c8e000)
AtapiVirtToPhysAddr_: f6c8e000 -> 00000000:2749b000
  ph data[4]=0:27498000 (3fff)
  get Phys(data[n=5+4000]=f6c8f000)
AtapiVirtToPhysAddr_: f6c8f000 -> 00000000:274a4000
  ph data[5]=0:274a4000 (fff)
  get Phys(data[n=6+1000]=f6c90000)
AtapiVirtToPhysAddr_: f6c90000 -> 00000000:274a5000
  ph data[5]=0:274a4000 (1fff)
  get Phys(data[n=6+2000]=f6c91000)
AtapiVirtToPhysAddr_: f6c91000 -> 00000000:2749e000
  ph data[6]=0:2749e000 (fff)
  get Phys(data[n=7+1000]=f6c92000)
AtapiVirtToPhysAddr_: f6c92000 -> 00000000:27497000
  ph data[7]=0:27497000 (fff)
  get Phys(data[n=8+1000]=f6c93000)
AtapiVirtToPhysAddr_: f6c93000 -> 00000000:274a0000
  set TERM
  ph data[8]=0:274a0000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0xb5ee6b08
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ee6b08, CDB 0xb5ee6b38, AtaReq 0xb6779048, SCmd 0x2a
UniataNeedQueueing: qd=2
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7003494
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39008270, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x9, flags 0x45, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ee6b08
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ee6b08, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ee6b08
AtapiInterrupt: NextRequest, srb=0xb5eed388
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9aec8
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390082f0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x9, flags 0x45, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ee6b08, CDB 0xb5ee6b38, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9ad00
** Ide: Command AtaReq 0xb6779048
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f6ff0000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f6ff0000)
AtapiVirtToPhysAddr_: f6ff0000 -> 00000000:0bc8b000
  ph data[0]=0:bc8b000 (fff)
  get Phys(data[n=1+1000]=f6ff1000)
AtapiVirtToPhysAddr_: f6ff1000 -> 00000000:0bc8c000
  set TERM
  ph data[0]=0:bc8b000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5ee6b08
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0xb5ee6b08
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ee6b08, CDB 0xb5ee6b38, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9abd4
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ee6b08
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ee6b08, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ee6b08
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ee6b08, CDB 0xb5ee6b38, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ee6b08
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9b230
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39058710, OrigWordsRequested 0x400, DevSize 0x4
IdeReadWrite (REQ): Starting sector is 39058710, Number of WORDS 0x400, DevSize 0x4
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f6ff0000, count 800, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f6ff0000)
AtapiVirtToPhysAddr_: f6ff0000 -> 00000000:0bccb000
  set TERM
  ph data[0]=0:bccb000 (7ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39058710, Count 0x4(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ee6b08
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 400, WordsLeft 400
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 800, full size 800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ee6b08, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ee6b08
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ee6b08, CDB 0xb5ee6b38, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ee6b08
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704b230
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc0850, OrigWordsRequested 0x6b00, DevSize 0x6b
IdeReadWrite (REQ): Starting sector is 38fc0850, Number of WORDS 0x6b00, DevSize 0x6b
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f6c46000, count d600, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f6c46000)
AtapiVirtToPhysAddr_: f6c46000 -> 00000000:0bd0b000
  ph data[0]=0:bd0b000 (fff)
  get Phys(data[n=1+1000]=f6c47000)
AtapiVirtToPhysAddr_: f6c47000 -> 00000000:0bd0c000
  ph data[0]=0:bd0b000 (1fff)
  get Phys(data[n=1+2000]=f6c48000)
AtapiVirtToPhysAddr_: f6c48000 -> 00000000:0bd0d000
  ph data[0]=0:bd0b000 (2fff)
  get Phys(data[n=1+3000]=f6c49000)
AtapiVirtToPhysAddr_: f6c49000 -> 00000000:0bd0e000
  ph data[0]=0:bd0b000 (3fff)
  get Phys(data[n=1+4000]=f6c4a000)
AtapiVirtToPhysAddr_: f6c4a000 -> 00000000:0bd0f000
  ph data[0]=0:bd0b000 (4fff)
  get Phys(data[n=1+5000]=f6c4b000)
AtapiVirtToPhysAddr_: f6c4b000 -> 00000000:0bd10000
  ph data[0]=0:bd0b000 (5fff)
  get Phys(data[n=1+6000]=f6c4c000)
AtapiVirtToPhysAddr_: f6c4c000 -> 00000000:0bd11000
  ph data[0]=0:bd0b000 (6fff)
  get Phys(data[n=1+7000]=f6c4d000)
AtapiVirtToPhysAddr_: f6c4d000 -> 00000000:0bd1a000
  ph data[1]=0:bd1a000 (fff)
  get Phys(data[n=2+1000]=f6c4e000)
AtapiVirtToPhysAddr_: f6c4e000 -> 00000000:0bd13000
  ph data[2]=0:bd13000 (fff)
  get Phys(data[n=3+1000]=f6c4f000)
AtapiVirtToPhysAddr_: f6c4f000 -> 00000000:0bd14000
  ph data[2]=0:bd13000 (1fff)
  get Phys(data[n=3+2000]=f6c50000)
AtapiVirtToPhysAddr_: f6c50000 -> 00000000:0bd15000
  ph data[2]=0:bd13000 (2fff)
  get Phys(data[n=3+3000]=f6c51000)
AtapiVirtToPhysAddr_: f6c51000 -> 00000000:0bd16000
  ph data[2]=0:bd13000 (3fff)
  get Phys(data[n=3+4000]=f6c52000)
AtapiVirtToPhysAddr_: f6c52000 -> 00000000:0bd17000
  ph data[2]=0:bd13000 (4fff)
  get Phys(data[n=3+5000]=f6c53000)
AtapiVirtToPhysAddr_: f6c53000 -> 00000000:0bd18000
  set TERM
  ph data[2]=0:bd13000 (55ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc0850, Count 0x6b(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x3, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ee6b08
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9ad00
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6ff0000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6ff0000)
AtapiVirtToPhysAddr_: f6ff0000 -> 00000000:0bd53000
  ph data[0]=0:bd53000 (fff)
  get Phys(data[n=1+1000]=f6ff1000)
AtapiVirtToPhysAddr_: f6ff1000 -> 00000000:0bd4c000
  set TERM
  ph data[1]=0:bd4c000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 6b00, WordsLeft 6b00
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered d600, full size d600
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ee6b08, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ee6b08
AtapiInterrupt: NextRequest, srb=0xb5eed388
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x2, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ee6b08, CDB 0xb5ee6b38, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ee6b08
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704b60c
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fc0850, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fc0850, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f6ffe000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:afcb3000
  ph data[0]=0:afcb3000 (fff)
  get Phys(data[n=1+1000]=f6fff000)
AtapiVirtToPhysAddr_: f6fff000 -> 00000000:afcb4000
  set TERM
  ph data[0]=0:afcb3000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fc0850, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ee6b08
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ee6b08, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ee6b08
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ee6b08, CDB 0xb5ee6b38, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ee6b08
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9ad00
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f6ff0000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f6ff0000)
AtapiVirtToPhysAddr_: f6ff0000 -> 00000000:afcbd000
  ph data[0]=0:afcbd000 (fff)
  get Phys(data[n=1+1000]=f6ff1000)
AtapiVirtToPhysAddr_: f6ff1000 -> 00000000:afcbe000
  set TERM
  ph data[0]=0:afcbd000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ee6b08
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ee6b08, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ee6b08
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ee6b08, CDB 0xb5ee6b38, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ee6b08
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704acec
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390585e0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390585e0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f6ff0000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f6ff0000)
AtapiVirtToPhysAddr_: f6ff0000 -> 00000000:afca5000
  ph data[0]=0:afca5000 (fff)
  get Phys(data[n=1+1000]=f6ff1000)
AtapiVirtToPhysAddr_: f6ff1000 -> 00000000:afc9e000
  set TERM
  ph data[1]=0:afc9e000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390585e0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x2, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ee6b08
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9b230
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39058740, OrigWordsRequested 0x200, DevSize 0x2
IdeReadWrite (REQ): Starting sector is 39058740, Number of WORDS 0x200, DevSize 0x2
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6ffe000, count 400, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:afd25000
  set TERM
  ph data[0]=0:afd25000 (3ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ee6b08, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ee6b08
AtapiInterrupt: NextRequest, srb=0xb5eed388
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf78019c4
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39058740, Count 0x2(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ee6b08, CDB 0xb5ee6b38, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704b40c
** Ide: Command AtaReq 0xb6779048
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586b0, OrigWordsRequested 0xe00, DevSize 0xe
IdeReadWrite (REQ): Starting sector is 390586b0, Number of WORDS 0xe00, DevSize 0xe
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f6ff0000, count 1c00, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f6ff0000)
AtapiVirtToPhysAddr_: f6ff0000 -> 00000000:0286d000
  ph data[0]=0:286d000 (fff)
  get Phys(data[n=1+1000]=f6ff1000)
AtapiVirtToPhysAddr_: f6ff1000 -> 00000000:0286e000
  set TERM
  ph data[0]=0:286d000 (1bff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5ee6b08
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 200, WordsLeft 200
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 400, full size 400
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0xb5ee6b08
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ee6b08, CDB 0xb5ee6b38, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586b0, Count 0xe(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ee6b08
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered e00, WordsLeft e00
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 1c00, full size 1c00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ee6b08, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ee6b08
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5eed388
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9ad00
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6ffe000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:024ea000
  ph data[0]=0:24ea000 (fff)
  get Phys(data[n=1+1000]=f6fff000)
AtapiVirtToPhysAddr_: f6fff000 -> 00000000:0251b000
  set TERM
  ph data[1]=0:251b000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x2, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5eed388
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6ffcd00
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6ffe000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:02541000
  ph data[0]=0:2541000 (fff)
  get Phys(data[n=1+1000]=f6fff000)
AtapiVirtToPhysAddr_: f6fff000 -> 00000000:0254a000
  set TERM
  ph data[1]=0:254a000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x2, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5eed388
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9ad00
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6ffe000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:02419000
  ph data[0]=0:2419000 (fff)
  get Phys(data[n=1+1000]=f6fff000)
AtapiVirtToPhysAddr_: f6fff000 -> 00000000:02422000
  set TERM
  ph data[1]=0:2422000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x2, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5eed388
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9b230
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39058700, OrigWordsRequested 0x400, DevSize 0x4
IdeReadWrite (REQ): Starting sector is 39058700, Number of WORDS 0x400, DevSize 0x4
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6ffe000, count 800, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:025b9000
  set TERM
  ph data[0]=0:25b9000 (7ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39058700, Count 0x4(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 400, WordsLeft 400
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 800, full size 800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ee6b08, CDB 0xb5ee6b38, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ee6b08
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6ffd230
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39058740, OrigWordsRequested 0x200, DevSize 0x2
IdeReadWrite (REQ): Starting sector is 39058740, Number of WORDS 0x200, DevSize 0x2
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f6ff0000, count 400, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f6ff0000)
AtapiVirtToPhysAddr_: f6ff0000 -> 00000000:02601000
  set TERM
  ph data[0]=0:2601000 (3ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39058740, Count 0x2(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ee6b08
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 200, WordsLeft 200
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 400, full size 400
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ee6b08, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ee6b08
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ee6b08, CDB 0xb5ee6b38, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ee6b08
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9ad00
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f6ffe000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:02649000
  ph data[0]=0:2649000 (fff)
  get Phys(data[n=1+1000]=f6fff000)
AtapiVirtToPhysAddr_: f6fff000 -> 00000000:0265a000
  set TERM
  ph data[1]=0:265a000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x2, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ee6b08
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ee6b08, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ee6b08
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ee6b08, CDB 0xb5ee6b38, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ee6b08
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9b230
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39058720, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 39058720, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f6ffe000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:026a1000
  set TERM
  ph data[0]=0:26a1000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39058720, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ee6b08
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ee6b08, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ee6b08
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb
(drivers/usb/usbehci/hardware.cpp:1321) CStatus b
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ee6b08, CDB 0xb5ee6b38, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ee6b08
TopLevel (3), AtaReq 0xb6779048
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6c931e0
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fb4c70, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fb4c70, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f6c44000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f6c44000)
AtapiVirtToPhysAddr_: f6c44000 -> 00000000:0290a000
  ph data[0]=0:290a000 (fff)
  get Phys(data[n=1+1000]=f6c45000)
AtapiVirtToPhysAddr_: f6c45000 -> 00000000:02913000
  ph data[1]=0:2913000 (fff)
  get Phys(data[n=2+1000]=f6c46000)
AtapiVirtToPhysAddr_: f6c46000 -> 00000000:0291c000
  ph data[2]=0:291c000 (fff)
  get Phys(data[n=3+1000]=f6c47000)
AtapiVirtToPhysAddr_: f6c47000 -> 00000000:02935000
  ph data[3]=0:2935000 (fff)
  get Phys(data[n=4+1000]=f6c48000)
AtapiVirtToPhysAddr_: f6c48000 -> 00000000:029d6000
  ph data[4]=0:29d6000 (fff)
  get Phys(data[n=5+1000]=f6c49000)
AtapiVirtToPhysAddr_: f6c49000 -> 00000000:02917000
  ph data[5]=0:2917000 (fff)
  get Phys(data[n=6+1000]=f6c4a000)
AtapiVirtToPhysAddr_: f6c4a000 -> 00000000:028e8000
  ph data[6]=0:28e8000 (fff)
  get Phys(data[n=7+1000]=f6c4b000)
AtapiVirtToPhysAddr_: f6c4b000 -> 00000000:02911000
  ph data[7]=0:2911000 (fff)
  get Phys(data[n=8+1000]=f6c4c000)
AtapiVirtToPhysAddr_: f6c4c000 -> 00000000:02912000
  ph data[7]=0:2911000 (1fff)
  get Phys(data[n=8+2000]=f6c4d000)
AtapiVirtToPhysAddr_: f6c4d000 -> 00000000:0291b000
  ph data[8]=0:291b000 (fff)
  get Phys(data[n=9+1000]=f6c4e000)
AtapiVirtToPhysAddr_: f6c4e000 -> 00000000:02924000
  ph data[9]=0:2924000 (fff)
  get Phys(data[n=10+1000]=f6c4f000)
AtapiVirtToPhysAddr_: f6c4f000 -> 00000000:029d5000
  ph data[10]=0:29d5000 (fff)
  get Phys(data[n=11+1000]=f6c50000)
AtapiVirtToPhysAddr_: f6c50000 -> 00000000:029ee000
  ph data[11]=0:29ee000 (fff)
  get Phys(data[n=12+1000]=f6c51000)
AtapiVirtToPhysAddr_: f6c51000 -> 00000000:0291f000
  ph data[12]=0:291f000 (fff)
  get Phys(data[n=13+1000]=f6c52000)
AtapiVirtToPhysAddr_: f6c52000 -> 00000000:028f0000
  ph data[13]=0:28f0000 (fff)
  get Phys(data[n=14+1000]=f6c53000)
AtapiVirtToPhysAddr_: f6c53000 -> 00000000:02919000
  set TERM
  ph data[14]=0:2919000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fb4c70, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0xf, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ee6b08
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6c931e0
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fb4cf0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fb4cf0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6c54000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6c54000)
AtapiVirtToPhysAddr_: f6c54000 -> 00000000:0291a000
  ph data[0]=0:291a000 (fff)
  get Phys(data[n=1+1000]=f6c55000)
AtapiVirtToPhysAddr_: f6c55000 -> 00000000:02923000
  ph data[1]=0:2923000 (fff)
  get Phys(data[n=2+1000]=f6c56000)
AtapiVirtToPhysAddr_: f6c56000 -> 00000000:0292c000
  ph data[2]=0:292c000 (fff)
  get Phys(data[n=3+1000]=f6c57000)
AtapiVirtToPhysAddr_: f6c57000 -> 00000000:029ed000
  ph data[3]=0:29ed000 (fff)
  get Phys(data[n=4+1000]=f6c58000)
AtapiVirtToPhysAddr_: f6c58000 -> 00000000:029f6000
  ph data[4]=0:29f6000 (fff)
  get Phys(data[n=5+1000]=f6c59000)
AtapiVirtToPhysAddr_: f6c59000 -> 00000000:02927000
  ph data[5]=0:2927000 (fff)
  get Phys(data[n=6+1000]=f6c5a000)
AtapiVirtToPhysAddr_: f6c5a000 -> 00000000:028f8000
  ph data[6]=0:28f8000 (fff)
  get Phys(data[n=7+1000]=f6c5b000)
AtapiVirtToPhysAddr_: f6c5b000 -> 00000000:028c9000
  ph data[7]=0:28c9000 (fff)
  get Phys(data[n=8+1000]=f6c5c000)
AtapiVirtToPhysAddr_: f6c5c000 -> 00000000:02922000
  ph data[8]=0:2922000 (fff)
  get Phys(data[n=9+1000]=f6c5d000)
AtapiVirtToPhysAddr_: f6c5d000 -> 00000000:0292b000
  ph data[9]=0:292b000 (fff)
  get Phys(data[n=10+1000]=f6c5e000)
AtapiVirtToPhysAddr_: f6c5e000 -> 00000000:02934000
  ph data[10]=0:2934000 (fff)
  get Phys(data[n=11+1000]=f6c5f000)
AtapiVirtToPhysAddr_: f6c5f000 -> 00000000:029f5000
  ph data[11]=0:29f5000 (fff)
  get Phys(data[n=12+1000]=f6c60000)
AtapiVirtToPhysAddr_: f6c60000 -> 00000000:029fe000
  ph data[12]=0:29fe000 (fff)
  get Phys(data[n=13+1000]=f6c61000)
AtapiVirtToPhysAddr_: f6c61000 -> 00000000:0292f000
  ph data[13]=0:292f000 (fff)
  get Phys(data[n=14+1000]=f6c62000)
AtapiVirtToPhysAddr_: f6c62000 -> 00000000:02900000
  ph data[14]=0:2900000 (fff)
  get Phys(data[n=15+1000]=f6c63000)
AtapiVirtToPhysAddr_: f6c63000 -> 00000000:029b9000
  set TERM
  ph data[15]=0:29b9000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6782120, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6c931e0
** Ide: Command AtaReq 0xb6782120
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fb4d70, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fb4d70, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6782120: cmd aligned b6782200, d=80
  ahci_cmd_ptr 0xb6782200
AtapiDmaSetup: mode 0x0, data f6c64000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6782200)
AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200
  get Phys(data[0]=f6c64000)
AtapiVirtToPhysAddr_: f6c64000 -> 00000000:0292a000
  ph data[0]=0:292a000 (fff)
  get Phys(data[n=1+1000]=f6c65000)
AtapiVirtToPhysAddr_: f6c65000 -> 00000000:02933000
  ph data[1]=0:2933000 (fff)
  get Phys(data[n=2+1000]=f6c66000)
AtapiVirtToPhysAddr_: f6c66000 -> 00000000:029d4000
  ph data[2]=0:29d4000 (fff)
  get Phys(data[n=3+1000]=f6c67000)
AtapiVirtToPhysAddr_: f6c67000 -> 00000000:029fd000
  ph data[3]=0:29fd000 (fff)
  get Phys(data[n=4+1000]=f6c68000)
AtapiVirtToPhysAddr_: f6c68000 -> 00000000:02a06000
  ph data[4]=0:2a06000 (fff)
  get Phys(data[n=5+1000]=f6c69000)
AtapiVirtToPhysAddr_: f6c69000 -> 00000000:02937000
  ph data[5]=0:2937000 (fff)
  get Phys(data[n=6+1000]=f6c6a000)
AtapiVirtToPhysAddr_: f6c6a000 -> 00000000:02908000
  ph data[6]=0:2908000 (fff)
  get Phys(data[n=7+1000]=f6c6b000)
AtapiVirtToPhysAddr_: f6c6b000 -> 00000000:029d1000
  ph data[7]=0:29d1000 (fff)
  get Phys(data[n=8+1000]=f6c6c000)
AtapiVirtToPhysAddr_: f6c6c000 -> 00000000:028ea000
  ph data[8]=0:28ea000 (fff)
  get Phys(data[n=9+1000]=f6c6d000)
AtapiVirtToPhysAddr_: f6c6d000 -> 00000000:028f3000
  ph data[9]=0:28f3000 (fff)
  get Phys(data[n=10+1000]=f6c6e000)
AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:029e4000
  ph data[10]=0:29e4000 (fff)
  get Phys(data[n=11+1000]=f6c6f000)
AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:02a05000
  ph data[11]=0:2a05000 (fff)
  get Phys(data[n=12+1000]=f6c70000)
AtapiVirtToPhysAddr_: f6c70000 -> 00000000:02a0e000
  ph data[12]=0:2a0e000 (fff)
  get Phys(data[n=13+1000]=f6c71000)
AtapiVirtToPhysAddr_: f6c71000 -> 00000000:029d7000
  ph data[13]=0:29d7000 (fff)
  get Phys(data[n=14+1000]=f6c72000)
AtapiVirtToPhysAddr_: f6c72000 -> 00000000:029a8000
  ph data[14]=0:29a8000 (fff)
  get Phys(data[n=15+1000]=f6c73000)
AtapiVirtToPhysAddr_: f6c73000 -> 00000000:029d9000
  set TERM
  ph data[15]=0:29d9000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6782200, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6c931e0
** Ide: Command AtaReq 0xb6777018
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fb4df0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fb4df0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f6c74000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f6c74000)
AtapiVirtToPhysAddr_: f6c74000 -> 00000000:029c2000
  ph data[0]=0:29c2000 (fff)
  get Phys(data[n=1+1000]=f6c75000)
AtapiVirtToPhysAddr_: f6c75000 -> 00000000:029cb000
  ph data[1]=0:29cb000 (fff)
  get Phys(data[n=2+1000]=f6c76000)
AtapiVirtToPhysAddr_: f6c76000 -> 00000000:029ec000
  ph data[2]=0:29ec000 (fff)
  get Phys(data[n=3+1000]=f6c77000)
AtapiVirtToPhysAddr_: f6c77000 -> 00000000:02a0d000
  ph data[3]=0:2a0d000 (fff)
  get Phys(data[n=4+1000]=f6c78000)
AtapiVirtToPhysAddr_: f6c78000 -> 00000000:02a16000
  ph data[4]=0:2a16000 (fff)
  get Phys(data[n=5+1000]=f6c79000)
AtapiVirtToPhysAddr_: f6c79000 -> 00000000:029ef000
  ph data[5]=0:29ef000 (fff)
  get Phys(data[n=6+1000]=f6c7a000)
AtapiVirtToPhysAddr_: f6c7a000 -> 00000000:029c0000
  ph data[6]=0:29c0000 (fff)
  get Phys(data[n=7+1000]=f6c7b000)
AtapiVirtToPhysAddr_: f6c7b000 -> 00000000:029e1000
  ph data[7]=0:29e1000 (fff)
  get Phys(data[n=8+1000]=f6c7c000)
AtapiVirtToPhysAddr_: f6c7c000 -> 00000000:029da000
  ph data[8]=0:29da000 (fff)
  get Phys(data[n=9+1000]=f6c7d000)
AtapiVirtToPhysAddr_: f6c7d000 -> 00000000:029e3000
  ph data[9]=0:29e3000 (fff)
  get Phys(data[n=10+1000]=f6c7e000)
AtapiVirtToPhysAddr_: f6c7e000 -> 00000000:029f4000
  ph data[10]=0:29f4000 (fff)
  get Phys(data[n=11+1000]=f6c7f000)
AtapiVirtToPhysAddr_: f6c7f000 -> 00000000:02a15000
  ph data[11]=0:2a15000 (fff)
  get Phys(data[n=12+1000]=f6c80000)
AtapiVirtToPhysAddr_: f6c80000 -> 00000000:02a1e000
  ph data[12]=0:2a1e000 (fff)
  get Phys(data[n=13+1000]=f6c81000)
AtapiVirtToPhysAddr_: f6c81000 -> 00000000:029f7000
  ph data[13]=0:29f7000 (fff)
  get Phys(data[n=14+1000]=f6c82000)
AtapiVirtToPhysAddr_: f6c82000 -> 00000000:029c8000
  ph data[14]=0:29c8000 (fff)
  get Phys(data[n=15+1000]=f6c83000)
AtapiVirtToPhysAddr_: f6c83000 -> 00000000:029e9000
  set TERM
  ph data[15]=0:29e9000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ed6ed0, CDB 0xb5ed6f00, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=4
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6ffcd00
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6ffe000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:029ea000
  ph data[0]=0:29ea000 (fff)
  get Phys(data[n=1+1000]=f6fff000)
AtapiVirtToPhysAddr_: f6fff000 -> 00000000:029eb000
  set TERM
  ph data[0]=0:29ea000 (1fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 5 request(s)!
AtapiStartIo: next Srb b5ed6ed0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ee6b08, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ee6b08
AtapiInterrupt: NextRequest, srb=0xb5eed388
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=4
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fb4cf0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x10, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0xb5ef2528
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6782120, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6782120
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fb4d70, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120
  AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200)
  prd_length 0x10, flags 0x5, base 8e45200
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0xb5ef24e0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fb4df0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x10, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0xb5ed6ed0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ed6ed0, CDB 0xb5ed6f00, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7801a14
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ed6ed0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6c9360c
** Ide: Command AtaReq 0xb6777018
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fb4c70, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 38fb4c70, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f6ff0000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f6ff0000)
AtapiVirtToPhysAddr_: f6ff0000 -> 00000000:0289a000
  ph data[0]=0:289a000 (fff)
  get Phys(data[n=1+1000]=f6ff1000)
AtapiVirtToPhysAddr_: f6ff1000 -> 00000000:028ab000
  set TERM
  ph data[1]=0:28ab000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ed6ed0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ed6ed0
AtapiInterrupt: NextRequest, srb=0xb5ef24e0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809faa18
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fb4c70, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x2, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef24e0
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6c92cec
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390585e0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390585e0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6ffe000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:02520000
  ph data[0]=0:2520000 (fff)
  get Phys(data[n=1+1000]=f6fff000)
AtapiVirtToPhysAddr_: f6fff000 -> 00000000:02531000
  set TERM
  ph data[1]=0:2531000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390585e0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x2, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef24e0
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6ffd174
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6ffe000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:02678000
  ph data[0]=0:2678000 (fff)
  get Phys(data[n=1+1000]=f6fff000)
AtapiVirtToPhysAddr_: f6fff000 -> 00000000:02699000
  set TERM
  ph data[1]=0:2699000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x2, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef24e0
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6ffcd00
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6ffe000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:02628000
  ph data[0]=0:2628000 (fff)
  get Phys(data[n=1+1000]=f6fff000)
AtapiVirtToPhysAddr_: f6fff000 -> 00000000:02641000
  set TERM
  ph data[1]=0:2641000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x2, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef24e0
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6ffcd00
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6ffe000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:02440000
  ph data[0]=0:2440000 (fff)
  get Phys(data[n=1+1000]=f6fff000)
AtapiVirtToPhysAddr_: f6fff000 -> 00000000:02459000
  set TERM
  ph data[1]=0:2459000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x2, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef24e0
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6ffd230
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39058700, OrigWordsRequested 0x400, DevSize 0x4
IdeReadWrite (REQ): Starting sector is 39058700, Number of WORDS 0x400, DevSize 0x4
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6ffe000, count 800, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:024c0000
  set TERM
  ph data[0]=0:24c0000 (7ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39058700, Count 0x4(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6c9340c
** Ide: Command AtaReq 0xb6777018
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586b0, OrigWordsRequested 0xe00, DevSize 0xe
IdeReadWrite (REQ): Starting sector is 390586b0, Number of WORDS 0xe00, DevSize 0xe
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f6ff0000, count 1c00, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f6ff0000)
AtapiVirtToPhysAddr_: f6ff0000 -> 00000000:028a8000
  ph data[0]=0:28a8000 (fff)
  get Phys(data[n=1+1000]=f6ff1000)
AtapiVirtToPhysAddr_: f6ff1000 -> 00000000:02851000
  set TERM
  ph data[1]=0:2851000 (bff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 400, WordsLeft 400
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 800, full size 800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0xb5ef2528
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6c932c0
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586b0, Count 0xe(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x2, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered e00, WordsLeft e00
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 1c00, full size 1c00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef24e0
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6ffcd00
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6ffe000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:02828000
  ph data[0]=0:2828000 (fff)
  get Phys(data[n=1+1000]=f6fff000)
AtapiVirtToPhysAddr_: f6fff000 -> 00000000:02891000
  set TERM
  ph data[1]=0:2891000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x2, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef24e0
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6ffd174
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6ffe000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:026a0000
  ph data[0]=0:26a0000 (fff)
  get Phys(data[n=1+1000]=f6fff000)
AtapiVirtToPhysAddr_: f6fff000 -> 00000000:02811000
  set TERM
  ph data[1]=0:2811000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x2, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef24e0
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6ffcd00
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6ffe000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:02590000
  ph data[0]=0:2590000 (fff)
  get Phys(data[n=1+1000]=f6fff000)
AtapiVirtToPhysAddr_: f6fff000 -> 00000000:02681000
  set TERM
  ph data[1]=0:2681000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x2, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef24e0
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6ffcd00
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6ffe000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:025d8000
  ph data[0]=0:25d8000 (fff)
  get Phys(data[n=1+1000]=f6fff000)
AtapiVirtToPhysAddr_: f6fff000 -> 00000000:025a9000
  set TERM
  ph data[1]=0:25a9000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x2, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef24e0
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6ffd230
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39058720, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 39058720, Number of WORDS 0x100, DevSize 0x1
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6ffe000, count 200, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6ffe000)
AtapiVirtToPhysAddr_: f6ffe000 -> 00000000:02560000
  set TERM
  ph data[0]=0:2560000 (1ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39058720, Count 0x1(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x1, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 100, WordsLeft 100
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
fixme:(dll/win32/rpcrt4/rpc_server.c:1739) (0x1000): stub
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef24e0
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7665468
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3960b660, OrigWordsRequested 0x2800, DevSize 0x28
IdeReadWrite (REQ): Starting sector is 3960b660, Number of WORDS 0x2800, DevSize 0x28
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6c6e000, count 5000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6c6e000)
AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:afcc6000
  ph data[0]=0:afcc6000 (fff)
  get Phys(data[n=1+1000]=f6c6f000)
AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:afcf7000
  ph data[1]=0:afcf7000 (fff)
  get Phys(data[n=2+1000]=f6c70000)
AtapiVirtToPhysAddr_: f6c70000 -> 00000000:afd50000
  ph data[2]=0:afd50000 (fff)
  get Phys(data[n=3+1000]=f6c71000)
AtapiVirtToPhysAddr_: f6c71000 -> 00000000:0bd59000
  ph data[3]=0:bd59000 (fff)
  get Phys(data[n=4+1000]=f6c72000)
AtapiVirtToPhysAddr_: f6c72000 -> 00000000:afcc2000
  set TERM
  ph data[4]=0:afcc2000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x3960b660, Count 0x28(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x5, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
Boot took 58641771738 cycles!
Interrupts: 64297 System Calls: 86411 Context Switches: 63797
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 2800, WordsLeft 2800
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 5000, full size 5000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
(drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb
(drivers/usb/usbehci/hardware.cpp:1321) CStatus b
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb5ef24e0
TopLevel (3), AtaReq 0xb677c090
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf70035c0
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39008170, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39008170, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6c2a000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6c2a000)
AtapiVirtToPhysAddr_: f6c2a000 -> 00000000:27461000
  ph data[0]=0:27461000 (fff)
  get Phys(data[n=1+1000]=f6c2b000)
AtapiVirtToPhysAddr_: f6c2b000 -> 00000000:27462000
  ph data[0]=0:27461000 (1fff)
  get Phys(data[n=1+2000]=f6c2c000)
AtapiVirtToPhysAddr_: f6c2c000 -> 00000000:27463000
  ph data[0]=0:27461000 (2fff)
  get Phys(data[n=1+3000]=f6c2d000)
AtapiVirtToPhysAddr_: f6c2d000 -> 00000000:2746c000
  ph data[1]=0:2746c000 (fff)
  get Phys(data[n=2+1000]=f6c2e000)
AtapiVirtToPhysAddr_: f6c2e000 -> 00000000:2746d000
  ph data[1]=0:2746c000 (1fff)
  get Phys(data[n=2+2000]=f6c2f000)
AtapiVirtToPhysAddr_: f6c2f000 -> 00000000:27466000
  ph data[2]=0:27466000 (fff)
  get Phys(data[n=3+1000]=f6c30000)
AtapiVirtToPhysAddr_: f6c30000 -> 00000000:2745f000
  ph data[3]=0:2745f000 (fff)
  get Phys(data[n=4+1000]=f6c31000)
AtapiVirtToPhysAddr_: f6c31000 -> 00000000:27468000
  ph data[4]=0:27468000 (fff)
  get Phys(data[n=5+1000]=f6c32000)
AtapiVirtToPhysAddr_: f6c32000 -> 00000000:27469000
  ph data[4]=0:27468000 (1fff)
  get Phys(data[n=5+2000]=f6c33000)
AtapiVirtToPhysAddr_: f6c33000 -> 00000000:2746a000
  ph data[4]=0:27468000 (2fff)
  get Phys(data[n=5+3000]=f6c34000)
AtapiVirtToPhysAddr_: f6c34000 -> 00000000:2746b000
  ph data[4]=0:27468000 (3fff)
  get Phys(data[n=5+4000]=f6c35000)
AtapiVirtToPhysAddr_: f6c35000 -> 00000000:27474000
  ph data[5]=0:27474000 (fff)
  get Phys(data[n=6+1000]=f6c36000)
AtapiVirtToPhysAddr_: f6c36000 -> 00000000:27475000
  ph data[5]=0:27474000 (1fff)
  get Phys(data[n=6+2000]=f6c37000)
AtapiVirtToPhysAddr_: f6c37000 -> 00000000:2746e000
  ph data[6]=0:2746e000 (fff)
  get Phys(data[n=7+1000]=f6c38000)
AtapiVirtToPhysAddr_: f6c38000 -> 00000000:27467000
  ph data[7]=0:27467000 (fff)
  get Phys(data[n=8+1000]=f6c39000)
AtapiVirtToPhysAddr_: f6c39000 -> 00000000:27470000
  set TERM
  ph data[8]=0:27470000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39008170, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x9, flags 0x45, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf70035c0
** Ide: Command AtaReq 0xb6777018
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 390081f0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390081f0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f6c3a000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f6c3a000)
AtapiVirtToPhysAddr_: f6c3a000 -> 00000000:27471000
  ph data[0]=0:27471000 (fff)
  get Phys(data[n=1+1000]=f6c3b000)
AtapiVirtToPhysAddr_: f6c3b000 -> 00000000:27472000
  ph data[0]=0:27471000 (1fff)
  get Phys(data[n=1+2000]=f6c3c000)
AtapiVirtToPhysAddr_: f6c3c000 -> 00000000:27473000
  ph data[0]=0:27471000 (2fff)
  get Phys(data[n=1+3000]=f6c3d000)
AtapiVirtToPhysAddr_: f6c3d000 -> 00000000:2747c000
  ph data[1]=0:2747c000 (fff)
  get Phys(data[n=2+1000]=f6c3e000)
AtapiVirtToPhysAddr_: f6c3e000 -> 00000000:2747d000
  ph data[1]=0:2747c000 (1fff)
  get Phys(data[n=2+2000]=f6c3f000)
AtapiVirtToPhysAddr_: f6c3f000 -> 00000000:27476000
  ph data[2]=0:27476000 (fff)
  get Phys(data[n=3+1000]=f6c40000)
AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2746f000
  ph data[3]=0:2746f000 (fff)
  get Phys(data[n=4+1000]=f6c41000)
AtapiVirtToPhysAddr_: f6c41000 -> 00000000:27478000
  ph data[4]=0:27478000 (fff)
  get Phys(data[n=5+1000]=f6c42000)
AtapiVirtToPhysAddr_: f6c42000 -> 00000000:27479000
  ph data[4]=0:27478000 (1fff)
  get Phys(data[n=5+2000]=f6c43000)
AtapiVirtToPhysAddr_: f6c43000 -> 00000000:2747a000
  ph data[4]=0:27478000 (2fff)
  get Phys(data[n=5+3000]=f6c44000)
AtapiVirtToPhysAddr_: f6c44000 -> 00000000:2747b000
  ph data[4]=0:27478000 (3fff)
  get Phys(data[n=5+4000]=f6c45000)
AtapiVirtToPhysAddr_: f6c45000 -> 00000000:27484000
  ph data[5]=0:27484000 (fff)
  get Phys(data[n=6+1000]=f6c46000)
AtapiVirtToPhysAddr_: f6c46000 -> 00000000:27485000
  ph data[5]=0:27484000 (1fff)
  get Phys(data[n=6+2000]=f6c47000)
AtapiVirtToPhysAddr_: f6c47000 -> 00000000:2747e000
  ph data[6]=0:2747e000 (fff)
  get Phys(data[n=7+1000]=f6c48000)
AtapiVirtToPhysAddr_: f6c48000 -> 00000000:27477000
  ph data[7]=0:27477000 (fff)
  get Phys(data[n=8+1000]=f6c49000)
AtapiVirtToPhysAddr_: f6c49000 -> 00000000:27480000
  set TERM
  ph data[8]=0:27480000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0xb5ef2528
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf700345c
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390081f0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x9, flags 0x45, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf70035c0
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39008270, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39008270, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6c4a000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6c4a000)
AtapiVirtToPhysAddr_: f6c4a000 -> 00000000:27481000
  ph data[0]=0:27481000 (fff)
  get Phys(data[n=1+1000]=f6c4b000)
AtapiVirtToPhysAddr_: f6c4b000 -> 00000000:27482000
  ph data[0]=0:27481000 (1fff)
  get Phys(data[n=1+2000]=f6c4c000)
AtapiVirtToPhysAddr_: f6c4c000 -> 00000000:27483000
  ph data[0]=0:27481000 (2fff)
  get Phys(data[n=1+3000]=f6c4d000)
AtapiVirtToPhysAddr_: f6c4d000 -> 00000000:2748c000
  ph data[1]=0:2748c000 (fff)
  get Phys(data[n=2+1000]=f6c4e000)
AtapiVirtToPhysAddr_: f6c4e000 -> 00000000:2748d000
  ph data[1]=0:2748c000 (1fff)
  get Phys(data[n=2+2000]=f6c4f000)
AtapiVirtToPhysAddr_: f6c4f000 -> 00000000:27486000
  ph data[2]=0:27486000 (fff)
  get Phys(data[n=3+1000]=f6c50000)
AtapiVirtToPhysAddr_: f6c50000 -> 00000000:2747f000
  ph data[3]=0:2747f000 (fff)
  get Phys(data[n=4+1000]=f6c51000)
AtapiVirtToPhysAddr_: f6c51000 -> 00000000:27488000
  ph data[4]=0:27488000 (fff)
  get Phys(data[n=5+1000]=f6c52000)
AtapiVirtToPhysAddr_: f6c52000 -> 00000000:27489000
  ph data[4]=0:27488000 (1fff)
  get Phys(data[n=5+2000]=f6c53000)
AtapiVirtToPhysAddr_: f6c53000 -> 00000000:2748a000
  ph data[4]=0:27488000 (2fff)
  get Phys(data[n=5+3000]=f6c54000)
AtapiVirtToPhysAddr_: f6c54000 -> 00000000:2748b000
  ph data[4]=0:27488000 (3fff)
  get Phys(data[n=5+4000]=f6c55000)
AtapiVirtToPhysAddr_: f6c55000 -> 00000000:27494000
  ph data[5]=0:27494000 (fff)
  get Phys(data[n=6+1000]=f6c56000)
AtapiVirtToPhysAddr_: f6c56000 -> 00000000:27495000
  ph data[5]=0:27494000 (1fff)
  get Phys(data[n=6+2000]=f6c57000)
AtapiVirtToPhysAddr_: f6c57000 -> 00000000:2748e000
  ph data[6]=0:2748e000 (fff)
  get Phys(data[n=7+1000]=f6c58000)
AtapiVirtToPhysAddr_: f6c58000 -> 00000000:27487000
  ph data[7]=0:27487000 (fff)
  get Phys(data[n=8+1000]=f6c59000)
AtapiVirtToPhysAddr_: f6c59000 -> 00000000:27490000
  set TERM
  ph data[8]=0:27490000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0xb5ef24e0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7003494
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39008270, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x9, flags 0x45, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf70035c0
** Ide: Command AtaReq 0xb6777018
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 390082f0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390082f0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f6c5a000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f6c5a000)
AtapiVirtToPhysAddr_: f6c5a000 -> 00000000:27491000
  ph data[0]=0:27491000 (fff)
  get Phys(data[n=1+1000]=f6c5b000)
AtapiVirtToPhysAddr_: f6c5b000 -> 00000000:27492000
  ph data[0]=0:27491000 (1fff)
  get Phys(data[n=1+2000]=f6c5c000)
AtapiVirtToPhysAddr_: f6c5c000 -> 00000000:27493000
  ph data[0]=0:27491000 (2fff)
  get Phys(data[n=1+3000]=f6c5d000)
AtapiVirtToPhysAddr_: f6c5d000 -> 00000000:2749c000
  ph data[1]=0:2749c000 (fff)
  get Phys(data[n=2+1000]=f6c5e000)
AtapiVirtToPhysAddr_: f6c5e000 -> 00000000:2749d000
  ph data[1]=0:2749c000 (1fff)
  get Phys(data[n=2+2000]=f6c5f000)
AtapiVirtToPhysAddr_: f6c5f000 -> 00000000:27496000
  ph data[2]=0:27496000 (fff)
  get Phys(data[n=3+1000]=f6c60000)
AtapiVirtToPhysAddr_: f6c60000 -> 00000000:2748f000
  ph data[3]=0:2748f000 (fff)
  get Phys(data[n=4+1000]=f6c61000)
AtapiVirtToPhysAddr_: f6c61000 -> 00000000:27498000
  ph data[4]=0:27498000 (fff)
  get Phys(data[n=5+1000]=f6c62000)
AtapiVirtToPhysAddr_: f6c62000 -> 00000000:27499000
  ph data[4]=0:27498000 (1fff)
  get Phys(data[n=5+2000]=f6c63000)
AtapiVirtToPhysAddr_: f6c63000 -> 00000000:2749a000
  ph data[4]=0:27498000 (2fff)
  get Phys(data[n=5+3000]=f6c64000)
AtapiVirtToPhysAddr_: f6c64000 -> 00000000:2749b000
  ph data[4]=0:27498000 (3fff)
  get Phys(data[n=5+4000]=f6c65000)
AtapiVirtToPhysAddr_: f6c65000 -> 00000000:274a4000
  ph data[5]=0:274a4000 (fff)
  get Phys(data[n=6+1000]=f6c66000)
AtapiVirtToPhysAddr_: f6c66000 -> 00000000:274a5000
  ph data[5]=0:274a4000 (1fff)
  get Phys(data[n=6+2000]=f6c67000)
AtapiVirtToPhysAddr_: f6c67000 -> 00000000:2749e000
  ph data[6]=0:2749e000 (fff)
  get Phys(data[n=7+1000]=f6c68000)
AtapiVirtToPhysAddr_: f6c68000 -> 00000000:27497000
  ph data[7]=0:27497000 (fff)
  get Phys(data[n=8+1000]=f6c69000)
AtapiVirtToPhysAddr_: f6c69000 -> 00000000:274a0000
  set TERM
  ph data[8]=0:274a0000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0xb5ef2528
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf77fdcbc
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390082f0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x9, flags 0x45, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6777018, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef2528
TopLevel (3), AtaReq 0xb6777018
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6c93600
** Ide: Command AtaReq 0xb6777018
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fee1b0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fee1b0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6777018: cmd aligned b6777080, d=8
  ahci_cmd_ptr 0xb6777080
AtapiDmaSetup: mode 0x0, data f6bea000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6777080)
AtapiVirtToPhysAddr_: b6777080 -> 00000000:08e3a080
  get Phys(data[0]=f6bea000)
AtapiVirtToPhysAddr_: f6bea000 -> 00000000:afcb0000
  ph data[0]=0:afcb0000 (fff)
  get Phys(data[n=1+1000]=f6beb000)
AtapiVirtToPhysAddr_: f6beb000 -> 00000000:afd49000
  ph data[1]=0:afd49000 (fff)
  get Phys(data[n=2+1000]=f6bec000)
AtapiVirtToPhysAddr_: f6bec000 -> 00000000:afd12000
  ph data[2]=0:afd12000 (fff)
  get Phys(data[n=3+1000]=f6bed000)
AtapiVirtToPhysAddr_: f6bed000 -> 00000000:afd33000
  ph data[3]=0:afd33000 (fff)
  get Phys(data[n=4+1000]=f6bee000)
AtapiVirtToPhysAddr_: f6bee000 -> 00000000:afca4000
  ph data[4]=0:afca4000 (fff)
  get Phys(data[n=5+1000]=f6bef000)
AtapiVirtToPhysAddr_: f6bef000 -> 00000000:afd35000
  ph data[5]=0:afd35000 (fff)
  get Phys(data[n=6+1000]=f6bf0000)
AtapiVirtToPhysAddr_: f6bf0000 -> 00000000:afcae000
  ph data[6]=0:afcae000 (fff)
  get Phys(data[n=7+1000]=f6bf1000)
AtapiVirtToPhysAddr_: f6bf1000 -> 00000000:afd1f000
  ph data[7]=0:afd1f000 (fff)
  get Phys(data[n=8+1000]=f6bf2000)
AtapiVirtToPhysAddr_: f6bf2000 -> 00000000:afca8000
  ph data[8]=0:afca8000 (fff)
  get Phys(data[n=9+1000]=f6bf3000)
AtapiVirtToPhysAddr_: f6bf3000 -> 00000000:afd41000
  ph data[9]=0:afd41000 (fff)
  get Phys(data[n=10+1000]=f6bf4000)
AtapiVirtToPhysAddr_: f6bf4000 -> 00000000:afd0a000
  ph data[10]=0:afd0a000 (fff)
  get Phys(data[n=11+1000]=f6bf5000)
AtapiVirtToPhysAddr_: f6bf5000 -> 00000000:afd2b000
  ph data[11]=0:afd2b000 (fff)
  get Phys(data[n=12+1000]=f6bf6000)
AtapiVirtToPhysAddr_: f6bf6000 -> 00000000:028e4000
  ph data[12]=0:28e4000 (fff)
  get Phys(data[n=13+1000]=f6bf7000)
AtapiVirtToPhysAddr_: f6bf7000 -> 00000000:afd2d000
  ph data[13]=0:afd2d000 (fff)
  get Phys(data[n=14+1000]=f6bf8000)
AtapiVirtToPhysAddr_: f6bf8000 -> 00000000:afca6000
  ph data[14]=0:afca6000 (fff)
  get Phys(data[n=15+1000]=f6bf9000)
AtapiVirtToPhysAddr_: f6bf9000 -> 00000000:afd17000
  set TERM
  ph data[15]=0:afd17000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6777080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fee1b0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6777018
  AHCI AtaReq CMD 0xb6777080 (ph 0x8e3a080)
  prd_length 0x10, flags 0x5, base 8e3a080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6c93600
** Ide: Command AtaReq 0xb677c090
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fee230, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fee230, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677c090: cmd aligned b677c100, d=10
  ahci_cmd_ptr 0xb677c100
AtapiDmaSetup: mode 0x0, data f6bfa000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677c100)
AtapiVirtToPhysAddr_: b677c100 -> 00000000:08e3f100
  get Phys(data[0]=f6bfa000)
AtapiVirtToPhysAddr_: f6bfa000 -> 00000000:afca0000
  ph data[0]=0:afca0000 (fff)
  get Phys(data[n=1+1000]=f6bfb000)
AtapiVirtToPhysAddr_: f6bfb000 -> 00000000:afd39000
  ph data[1]=0:afd39000 (fff)
  get Phys(data[n=2+1000]=f6bfc000)
AtapiVirtToPhysAddr_: f6bfc000 -> 00000000:afd02000
  ph data[2]=0:afd02000 (fff)
  get Phys(data[n=3+1000]=f6bfd000)
AtapiVirtToPhysAddr_: f6bfd000 -> 00000000:afd23000
  ph data[3]=0:afd23000 (fff)
  get Phys(data[n=4+1000]=f6bfe000)
AtapiVirtToPhysAddr_: f6bfe000 -> 00000000:0289c000
  ph data[4]=0:289c000 (fff)
  get Phys(data[n=5+1000]=f6bff000)
AtapiVirtToPhysAddr_: f6bff000 -> 00000000:afd25000
  ph data[5]=0:afd25000 (fff)
  get Phys(data[n=6+1000]=f6c00000)
AtapiVirtToPhysAddr_: f6c00000 -> 00000000:afc9e000
  ph data[6]=0:afc9e000 (fff)
  get Phys(data[n=7+1000]=f6c01000)
AtapiVirtToPhysAddr_: f6c01000 -> 00000000:afd0f000
  ph data[7]=0:afd0f000 (fff)
  get Phys(data[n=8+1000]=f6c02000)
AtapiVirtToPhysAddr_: f6c02000 -> 00000000:028d0000
  ph data[8]=0:28d0000 (fff)
  get Phys(data[n=9+1000]=f6c03000)
AtapiVirtToPhysAddr_: f6c03000 -> 00000000:afd31000
  ph data[9]=0:afd31000 (fff)
  get Phys(data[n=10+1000]=f6c04000)
AtapiVirtToPhysAddr_: f6c04000 -> 00000000:afcfa000
  ph data[10]=0:afcfa000 (fff)
  get Phys(data[n=11+1000]=f6c05000)
AtapiVirtToPhysAddr_: f6c05000 -> 00000000:afd1b000
  ph data[11]=0:afd1b000 (fff)
  get Phys(data[n=12+1000]=f6c06000)
AtapiVirtToPhysAddr_: f6c06000 -> 00000000:02894000
  ph data[12]=0:2894000 (fff)
  get Phys(data[n=13+1000]=f6c07000)
AtapiVirtToPhysAddr_: f6c07000 -> 00000000:afd1d000
  ph data[13]=0:afd1d000 (fff)
  get Phys(data[n=14+1000]=f6c08000)
AtapiVirtToPhysAddr_: f6c08000 -> 00000000:028e6000
  ph data[14]=0:28e6000 (fff)
  get Phys(data[n=15+1000]=f6c09000)
AtapiVirtToPhysAddr_: f6c09000 -> 00000000:afd07000
  set TERM
  ph data[15]=0:afd07000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677c100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6782120, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6c93600
** Ide: Command AtaReq 0xb6782120
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fee2b0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fee2b0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6782120: cmd aligned b6782200, d=80
  ahci_cmd_ptr 0xb6782200
AtapiDmaSetup: mode 0x0, data f6c0a000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6782200)
AtapiVirtToPhysAddr_: b6782200 -> 00000000:08e45200
  get Phys(data[0]=f6c0a000)
AtapiVirtToPhysAddr_: f6c0a000 -> 00000000:028b8000
  ph data[0]=0:28b8000 (fff)
  get Phys(data[n=1+1000]=f6c0b000)
AtapiVirtToPhysAddr_: f6c0b000 -> 00000000:afd29000
  ph data[1]=0:afd29000 (fff)
  get Phys(data[n=2+1000]=f6c0c000)
AtapiVirtToPhysAddr_: f6c0c000 -> 00000000:afcb2000
  ph data[2]=0:afcb2000 (fff)
  get Phys(data[n=3+1000]=f6c0d000)
AtapiVirtToPhysAddr_: f6c0d000 -> 00000000:afd13000
  ph data[3]=0:afd13000 (fff)
  get Phys(data[n=4+1000]=f6c0e000)
AtapiVirtToPhysAddr_: f6c0e000 -> 00000000:0288c000
  ph data[4]=0:288c000 (fff)
  get Phys(data[n=5+1000]=f6c0f000)
AtapiVirtToPhysAddr_: f6c0f000 -> 00000000:afd15000
  ph data[5]=0:afd15000 (fff)
  get Phys(data[n=6+1000]=f6c10000)
AtapiVirtToPhysAddr_: f6c10000 -> 00000000:0289e000
  ph data[6]=0:289e000 (fff)
  get Phys(data[n=7+1000]=f6c11000)
AtapiVirtToPhysAddr_: f6c11000 -> 00000000:afcff000
  ph data[7]=0:afcff000 (fff)
  get Phys(data[n=8+1000]=f6c12000)
AtapiVirtToPhysAddr_: f6c12000 -> 00000000:02870000
  ph data[8]=0:2870000 (fff)
  get Phys(data[n=9+1000]=f6c13000)
AtapiVirtToPhysAddr_: f6c13000 -> 00000000:afd21000
  ph data[9]=0:afd21000 (fff)
  get Phys(data[n=10+1000]=f6c14000)
AtapiVirtToPhysAddr_: f6c14000 -> 00000000:afcaa000
  ph data[10]=0:afcaa000 (fff)
  get Phys(data[n=11+1000]=f6c15000)
AtapiVirtToPhysAddr_: f6c15000 -> 00000000:afd0b000
  ph data[11]=0:afd0b000 (fff)
  get Phys(data[n=12+1000]=f6c16000)
AtapiVirtToPhysAddr_: f6c16000 -> 00000000:02884000
  ph data[12]=0:2884000 (fff)
  get Phys(data[n=13+1000]=f6c17000)
AtapiVirtToPhysAddr_: f6c17000 -> 00000000:afd0d000
  ph data[13]=0:afd0d000 (fff)
  get Phys(data[n=14+1000]=f6c18000)
AtapiVirtToPhysAddr_: f6c18000 -> 00000000:02896000
  ph data[14]=0:2896000 (fff)
  get Phys(data[n=15+1000]=f6c19000)
AtapiVirtToPhysAddr_: f6c19000 -> 00000000:afcb7000
  set TERM
  ph data[15]=0:afcb7000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6782200, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ee6b08, CDB 0xb5ee6b38, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6c93600
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fee330, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fee330, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6c1a000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6c1a000)
AtapiVirtToPhysAddr_: f6c1a000 -> 00000000:02868000
  ph data[0]=0:2868000 (fff)
  get Phys(data[n=1+1000]=f6c1b000)
AtapiVirtToPhysAddr_: f6c1b000 -> 00000000:afd19000
  ph data[1]=0:afd19000 (fff)
  get Phys(data[n=2+1000]=f6c1c000)
AtapiVirtToPhysAddr_: f6c1c000 -> 00000000:afca2000
  ph data[2]=0:afca2000 (fff)
  get Phys(data[n=3+1000]=f6c1d000)
AtapiVirtToPhysAddr_: f6c1d000 -> 00000000:afd03000
  ph data[3]=0:afd03000 (fff)
  get Phys(data[n=4+1000]=f6c1e000)
AtapiVirtToPhysAddr_: f6c1e000 -> 00000000:0287c000
  ph data[4]=0:287c000 (fff)
  get Phys(data[n=5+1000]=f6c1f000)
AtapiVirtToPhysAddr_: f6c1f000 -> 00000000:afd05000
  ph data[5]=0:afd05000 (fff)
  get Phys(data[n=6+1000]=f6c20000)
AtapiVirtToPhysAddr_: f6c20000 -> 00000000:0288e000
  ph data[6]=0:288e000 (fff)
  get Phys(data[n=7+1000]=f6c21000)
AtapiVirtToPhysAddr_: f6c21000 -> 00000000:afcaf000
  ph data[7]=0:afcaf000 (fff)
  get Phys(data[n=8+1000]=f6c22000)
AtapiVirtToPhysAddr_: f6c22000 -> 00000000:02860000
  ph data[8]=0:2860000 (fff)
  get Phys(data[n=9+1000]=f6c23000)
AtapiVirtToPhysAddr_: f6c23000 -> 00000000:afd11000
  ph data[9]=0:afd11000 (fff)
  get Phys(data[n=10+1000]=f6c24000)
AtapiVirtToPhysAddr_: f6c24000 -> 00000000:028f2000
  ph data[10]=0:28f2000 (fff)
  get Phys(data[n=11+1000]=f6c25000)
AtapiVirtToPhysAddr_: f6c25000 -> 00000000:afcfb000
  ph data[11]=0:afcfb000 (fff)
  get Phys(data[n=12+1000]=f6c26000)
AtapiVirtToPhysAddr_: f6c26000 -> 00000000:02874000
  ph data[12]=0:2874000 (fff)
  get Phys(data[n=13+1000]=f6c27000)
AtapiVirtToPhysAddr_: f6c27000 -> 00000000:afcfd000
  ph data[13]=0:afcfd000 (fff)
  get Phys(data[n=14+1000]=f6c28000)
AtapiVirtToPhysAddr_: f6c28000 -> 00000000:02886000
  ph data[14]=0:2886000 (fff)
  get Phys(data[n=15+1000]=f6c29000)
AtapiVirtToPhysAddr_: f6c29000 -> 00000000:afca7000
  set TERM
  ph data[15]=0:afca7000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b5ee6b08
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=4
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9b600
** Ide: Command AtaReq 0xb6779048
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fb4e70, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fb4e70, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f6baa000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f6baa000)
AtapiVirtToPhysAddr_: f6baa000 -> 00000000:028e7000
  ph data[0]=0:28e7000 (fff)
  get Phys(data[n=1+1000]=f6bab000)
AtapiVirtToPhysAddr_: f6bab000 -> 00000000:02848000
  ph data[1]=0:2848000 (fff)
  get Phys(data[n=2+1000]=f6bac000)
AtapiVirtToPhysAddr_: f6bac000 -> 00000000:afcf9000
  ph data[2]=0:afcf9000 (fff)
  get Phys(data[n=3+1000]=f6bad000)
AtapiVirtToPhysAddr_: f6bad000 -> 00000000:0288a000
  ph data[3]=0:288a000 (fff)
  get Phys(data[n=4+1000]=f6bae000)
AtapiVirtToPhysAddr_: f6bae000 -> 00000000:afca3000
  ph data[4]=0:afca3000 (fff)
  get Phys(data[n=5+1000]=f6baf000)
AtapiVirtToPhysAddr_: f6baf000 -> 00000000:afcb4000
  ph data[5]=0:afcb4000 (fff)
  get Phys(data[n=6+1000]=f6bb0000)
AtapiVirtToPhysAddr_: f6bb0000 -> 00000000:028e5000
  ph data[6]=0:28e5000 (fff)
  get Phys(data[n=7+1000]=f6bb1000)
AtapiVirtToPhysAddr_: f6bb1000 -> 00000000:0286e000
  ph data[7]=0:286e000 (fff)
  get Phys(data[n=8+1000]=f6bb2000)
AtapiVirtToPhysAddr_: f6bb2000 -> 00000000:0289f000
  ph data[8]=0:289f000 (fff)
  get Phys(data[n=9+1000]=f6bb3000)
AtapiVirtToPhysAddr_: f6bb3000 -> 00000000:0bc88000
  ph data[9]=0:bc88000 (fff)
  get Phys(data[n=10+1000]=f6bb4000)
AtapiVirtToPhysAddr_: f6bb4000 -> 00000000:afcb1000
  ph data[10]=0:afcb1000 (fff)
  get Phys(data[n=11+1000]=f6bb5000)
AtapiVirtToPhysAddr_: f6bb5000 -> 00000000:02882000
  ph data[11]=0:2882000 (fff)
  get Phys(data[n=12+1000]=f6bb6000)
AtapiVirtToPhysAddr_: f6bb6000 -> 00000000:028e3000
  ph data[12]=0:28e3000 (fff)
  get Phys(data[n=13+1000]=f6bb7000)
AtapiVirtToPhysAddr_: f6bb7000 -> 00000000:0bc84000
  ph data[13]=0:bc84000 (fff)
  get Phys(data[n=14+1000]=f6bb8000)
AtapiVirtToPhysAddr_: f6bb8000 -> 00000000:0289d000
  ph data[14]=0:289d000 (fff)
  get Phys(data[n=15+1000]=f6bb9000)
AtapiVirtToPhysAddr_: f6bb9000 -> 00000000:0bc86000
  set TERM
  ph data[15]=0:bc86000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 5 request(s)!
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ed6ed0, CDB 0xb5ed6f00, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=5
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9b600
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fb4ef0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fb4ef0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f6bba000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f6bba000)
AtapiVirtToPhysAddr_: f6bba000 -> 00000000:02897000
  ph data[0]=0:2897000 (fff)
  get Phys(data[n=1+1000]=f6bbb000)
AtapiVirtToPhysAddr_: f6bbb000 -> 00000000:0bc80000
  ph data[1]=0:bc80000 (fff)
  get Phys(data[n=2+1000]=f6bbc000)
AtapiVirtToPhysAddr_: f6bbc000 -> 00000000:afca9000
  ph data[2]=0:afca9000 (fff)
  get Phys(data[n=3+1000]=f6bbd000)
AtapiVirtToPhysAddr_: f6bbd000 -> 00000000:0287a000
  ph data[3]=0:287a000 (fff)
  get Phys(data[n=4+1000]=f6bbe000)
AtapiVirtToPhysAddr_: f6bbe000 -> 00000000:0289b000
  ph data[4]=0:289b000 (fff)
  get Phys(data[n=5+1000]=f6bbf000)
AtapiVirtToPhysAddr_: f6bbf000 -> 00000000:0bc7c000
  ph data[5]=0:bc7c000 (fff)
  get Phys(data[n=6+1000]=f6bc0000)
AtapiVirtToPhysAddr_: f6bc0000 -> 00000000:02895000
  ph data[6]=0:2895000 (fff)
  get Phys(data[n=7+1000]=f6bc1000)
AtapiVirtToPhysAddr_: f6bc1000 -> 00000000:0bc7e000
  ph data[7]=0:bc7e000 (fff)
  get Phys(data[n=8+1000]=f6bc2000)
AtapiVirtToPhysAddr_: f6bc2000 -> 00000000:0288f000
  ph data[8]=0:288f000 (fff)
  get Phys(data[n=9+1000]=f6bc3000)
AtapiVirtToPhysAddr_: f6bc3000 -> 00000000:0bc78000
  ph data[9]=0:bc78000 (fff)
  get Phys(data[n=10+1000]=f6bc4000)
AtapiVirtToPhysAddr_: f6bc4000 -> 00000000:afca1000
  ph data[10]=0:afca1000 (fff)
  get Phys(data[n=11+1000]=f6bc5000)
AtapiVirtToPhysAddr_: f6bc5000 -> 00000000:02872000
  ph data[11]=0:2872000 (fff)
  get Phys(data[n=12+1000]=f6bc6000)
AtapiVirtToPhysAddr_: f6bc6000 -> 00000000:02893000
  ph data[12]=0:2893000 (fff)
  get Phys(data[n=13+1000]=f6bc7000)
AtapiVirtToPhysAddr_: f6bc7000 -> 00000000:0bc74000
  ph data[13]=0:bc74000 (fff)
  get Phys(data[n=14+1000]=f6bc8000)
AtapiVirtToPhysAddr_: f6bc8000 -> 00000000:0288d000
  ph data[14]=0:288d000 (fff)
  get Phys(data[n=15+1000]=f6bc9000)
AtapiVirtToPhysAddr_: f6bc9000 -> 00000000:0bc76000
  set TERM
  ph data[15]=0:bc76000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 6 request(s)!
AtapiStartIo: next Srb b5ed6ed0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eba1e8, CDB 0xb5eba218, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=6
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9b600
** Ide: Command AtaReq 0xb677b078
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fb4f70, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fb4f70, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f6bca000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f6bca000)
AtapiVirtToPhysAddr_: f6bca000 -> 00000000:02887000
  ph data[0]=0:2887000 (fff)
  get Phys(data[n=1+1000]=f6bcb000)
AtapiVirtToPhysAddr_: f6bcb000 -> 00000000:0bc70000
  ph data[1]=0:bc70000 (fff)
  get Phys(data[n=2+1000]=f6bcc000)
AtapiVirtToPhysAddr_: f6bcc000 -> 00000000:028e1000
  ph data[2]=0:28e1000 (fff)
  get Phys(data[n=3+1000]=f6bcd000)
AtapiVirtToPhysAddr_: f6bcd000 -> 00000000:0286a000
  ph data[3]=0:286a000 (fff)
  get Phys(data[n=4+1000]=f6bce000)
AtapiVirtToPhysAddr_: f6bce000 -> 00000000:0288b000
  ph data[4]=0:288b000 (fff)
  get Phys(data[n=5+1000]=f6bcf000)
AtapiVirtToPhysAddr_: f6bcf000 -> 00000000:0bc6c000
  ph data[5]=0:bc6c000 (fff)
  get Phys(data[n=6+1000]=f6bd0000)
AtapiVirtToPhysAddr_: f6bd0000 -> 00000000:02885000
  ph data[6]=0:2885000 (fff)
  get Phys(data[n=7+1000]=f6bd1000)
AtapiVirtToPhysAddr_: f6bd1000 -> 00000000:0bc6e000
  ph data[7]=0:bc6e000 (fff)
  get Phys(data[n=8+1000]=f6bd2000)
AtapiVirtToPhysAddr_: f6bd2000 -> 00000000:0287f000
  ph data[8]=0:287f000 (fff)
  get Phys(data[n=9+1000]=f6bd3000)
AtapiVirtToPhysAddr_: f6bd3000 -> 00000000:0bc68000
  ph data[9]=0:bc68000 (fff)
  get Phys(data[n=10+1000]=f6bd4000)
AtapiVirtToPhysAddr_: f6bd4000 -> 00000000:028d1000
  ph data[10]=0:28d1000 (fff)
  get Phys(data[n=11+1000]=f6bd5000)
AtapiVirtToPhysAddr_: f6bd5000 -> 00000000:02862000
  ph data[11]=0:2862000 (fff)
  get Phys(data[n=12+1000]=f6bd6000)
AtapiVirtToPhysAddr_: f6bd6000 -> 00000000:02883000
  ph data[12]=0:2883000 (fff)
  get Phys(data[n=13+1000]=f6bd7000)
AtapiVirtToPhysAddr_: f6bd7000 -> 00000000:0bc64000
  ph data[13]=0:bc64000 (fff)
  get Phys(data[n=14+1000]=f6bd8000)
AtapiVirtToPhysAddr_: f6bd8000 -> 00000000:0287d000
  ph data[14]=0:287d000 (fff)
  get Phys(data[n=15+1000]=f6bd9000)
AtapiVirtToPhysAddr_: f6bd9000 -> 00000000:0bc66000
  set TERM
  ph data[15]=0:bc66000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 7 request(s)!
AtapiStartIo: next Srb b5eba1e8
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eba1a0, CDB 0xb5eba1d0, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=7
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9b600
** Ide: Command AtaReq 0xb67800f0
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fb4ff0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fb4ff0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb67800f0: cmd aligned b6780180, d=30
  ahci_cmd_ptr 0xb6780180
AtapiDmaSetup: mode 0x0, data f6bda000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6780180)
AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180
  get Phys(data[0]=f6bda000)
AtapiVirtToPhysAddr_: f6bda000 -> 00000000:02877000
  ph data[0]=0:2877000 (fff)
  get Phys(data[n=1+1000]=f6bdb000)
AtapiVirtToPhysAddr_: f6bdb000 -> 00000000:0bc60000
  ph data[1]=0:bc60000 (fff)
  get Phys(data[n=2+1000]=f6bdc000)
AtapiVirtToPhysAddr_: f6bdc000 -> 00000000:02881000
  ph data[2]=0:2881000 (fff)
  get Phys(data[n=3+1000]=f6bdd000)
AtapiVirtToPhysAddr_: f6bdd000 -> 00000000:0bc8a000
  ph data[3]=0:bc8a000 (fff)
  get Phys(data[n=4+1000]=f6bde000)
AtapiVirtToPhysAddr_: f6bde000 -> 00000000:0287b000
  ph data[4]=0:287b000 (fff)
  get Phys(data[n=5+1000]=f6bdf000)
AtapiVirtToPhysAddr_: f6bdf000 -> 00000000:0bc5c000
  ph data[5]=0:bc5c000 (fff)
  get Phys(data[n=6+1000]=f6be0000)
AtapiVirtToPhysAddr_: f6be0000 -> 00000000:02875000
  ph data[6]=0:2875000 (fff)
  get Phys(data[n=7+1000]=f6be1000)
AtapiVirtToPhysAddr_: f6be1000 -> 00000000:0bc5e000
  ph data[7]=0:bc5e000 (fff)
  get Phys(data[n=8+1000]=f6be2000)
AtapiVirtToPhysAddr_: f6be2000 -> 00000000:0286f000
  ph data[8]=0:286f000 (fff)
  get Phys(data[n=9+1000]=f6be3000)
AtapiVirtToPhysAddr_: f6be3000 -> 00000000:0bc58000
  ph data[9]=0:bc58000 (fff)
  get Phys(data[n=10+1000]=f6be4000)
AtapiVirtToPhysAddr_: f6be4000 -> 00000000:02879000
  ph data[10]=0:2879000 (fff)
  get Phys(data[n=11+1000]=f6be5000)
AtapiVirtToPhysAddr_: f6be5000 -> 00000000:0bc82000
  ph data[11]=0:bc82000 (fff)
  get Phys(data[n=12+1000]=f6be6000)
AtapiVirtToPhysAddr_: f6be6000 -> 00000000:02873000
  ph data[12]=0:2873000 (fff)
  get Phys(data[n=13+1000]=f6be7000)
AtapiVirtToPhysAddr_: f6be7000 -> 00000000:0bc54000
  ph data[13]=0:bc54000 (fff)
  get Phys(data[n=14+1000]=f6be8000)
AtapiVirtToPhysAddr_: f6be8000 -> 00000000:0286d000
  ph data[14]=0:286d000 (fff)
  get Phys(data[n=15+1000]=f6be9000)
AtapiVirtToPhysAddr_: f6be9000 -> 00000000:0bc56000
  set TERM
  ph data[15]=0:bc56000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6780180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 8 request(s)!
AtapiStartIo: next Srb b5eba1a0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eb9238, CDB 0xb5eb9268, AtaReq 0xb677f0d8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=8
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704acec
** Ide: Command AtaReq 0xb677f0d8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390585e0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390585e0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677f0d8: cmd aligned b677f180, d=48
  ahci_cmd_ptr 0xb677f180
AtapiDmaSetup: mode 0x0, data f6ff0000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677f180)
AtapiVirtToPhysAddr_: b677f180 -> 00000000:08e42180
  get Phys(data[0]=f6ff0000)
AtapiVirtToPhysAddr_: f6ff0000 -> 00000000:0bc87000
  ph data[0]=0:bc87000 (fff)
  get Phys(data[n=1+1000]=f6ff1000)
AtapiVirtToPhysAddr_: f6ff1000 -> 00000000:0bc50000
  set TERM
  ph data[1]=0:bc50000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677f180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 9 request(s)!
AtapiStartIo: next Srb b5eb9238
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eb9150, CDB 0xb5eb9180, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=9
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf70035c0
** Ide: Command AtaReq 0xb677a060
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39008170, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39008170, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677a060: cmd aligned b677a100, d=40
  ahci_cmd_ptr 0xb677a100
AtapiDmaSetup: mode 0x0, data f6c2a000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677a100)
AtapiVirtToPhysAddr_: b677a100 -> 00000000:08e3d100
  get Phys(data[0]=f6c2a000)
AtapiVirtToPhysAddr_: f6c2a000 -> 00000000:27461000
  ph data[0]=0:27461000 (fff)
  get Phys(data[n=1+1000]=f6c2b000)
AtapiVirtToPhysAddr_: f6c2b000 -> 00000000:27462000
  ph data[0]=0:27461000 (1fff)
  get Phys(data[n=1+2000]=f6c2c000)
AtapiVirtToPhysAddr_: f6c2c000 -> 00000000:27463000
  ph data[0]=0:27461000 (2fff)
  get Phys(data[n=1+3000]=f6c2d000)
AtapiVirtToPhysAddr_: f6c2d000 -> 00000000:2746c000
  ph data[1]=0:2746c000 (fff)
  get Phys(data[n=2+1000]=f6c2e000)
AtapiVirtToPhysAddr_: f6c2e000 -> 00000000:2746d000
  ph data[1]=0:2746c000 (1fff)
  get Phys(data[n=2+2000]=f6c2f000)
AtapiVirtToPhysAddr_: f6c2f000 -> 00000000:27466000
  ph data[2]=0:27466000 (fff)
  get Phys(data[n=3+1000]=f6c30000)
AtapiVirtToPhysAddr_: f6c30000 -> 00000000:2745f000
  ph data[3]=0:2745f000 (fff)
  get Phys(data[n=4+1000]=f6c31000)
AtapiVirtToPhysAddr_: f6c31000 -> 00000000:27468000
  ph data[4]=0:27468000 (fff)
  get Phys(data[n=5+1000]=f6c32000)
AtapiVirtToPhysAddr_: f6c32000 -> 00000000:27469000
  ph data[4]=0:27468000 (1fff)
  get Phys(data[n=5+2000]=f6c33000)
AtapiVirtToPhysAddr_: f6c33000 -> 00000000:2746a000
  ph data[4]=0:27468000 (2fff)
  get Phys(data[n=5+3000]=f6c34000)
AtapiVirtToPhysAddr_: f6c34000 -> 00000000:2746b000
  ph data[4]=0:27468000 (3fff)
  get Phys(data[n=5+4000]=f6c35000)
AtapiVirtToPhysAddr_: f6c35000 -> 00000000:27474000
  ph data[5]=0:27474000 (fff)
  get Phys(data[n=6+1000]=f6c36000)
AtapiVirtToPhysAddr_: f6c36000 -> 00000000:27475000
  ph data[5]=0:27474000 (1fff)
  get Phys(data[n=6+2000]=f6c37000)
AtapiVirtToPhysAddr_: f6c37000 -> 00000000:2746e000
  ph data[6]=0:2746e000 (fff)
  get Phys(data[n=7+1000]=f6c38000)
AtapiVirtToPhysAddr_: f6c38000 -> 00000000:27467000
  ph data[7]=0:27467000 (fff)
  get Phys(data[n=8+1000]=f6c39000)
AtapiVirtToPhysAddr_: f6c39000 -> 00000000:27470000
  set TERM
  ph data[8]=0:27470000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677a100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 10 request(s)!
AtapiStartIo: next Srb b5eb9150
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eb8570, CDB 0xb5eb85a0, AtaReq 0xb6781108, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=a
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf70035c0
** Ide: Command AtaReq 0xb6781108
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 390081f0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390081f0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6781108: cmd aligned b6781180, d=18
  ahci_cmd_ptr 0xb6781180
AtapiDmaSetup: mode 0x0, data f6c3a000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6781180)
AtapiVirtToPhysAddr_: b6781180 -> 00000000:08e44180
  get Phys(data[0]=f6c3a000)
AtapiVirtToPhysAddr_: f6c3a000 -> 00000000:27471000
  ph data[0]=0:27471000 (fff)
  get Phys(data[n=1+1000]=f6c3b000)
AtapiVirtToPhysAddr_: f6c3b000 -> 00000000:27472000
  ph data[0]=0:27471000 (1fff)
  get Phys(data[n=1+2000]=f6c3c000)
AtapiVirtToPhysAddr_: f6c3c000 -> 00000000:27473000
  ph data[0]=0:27471000 (2fff)
  get Phys(data[n=1+3000]=f6c3d000)
AtapiVirtToPhysAddr_: f6c3d000 -> 00000000:2747c000
  ph data[1]=0:2747c000 (fff)
  get Phys(data[n=2+1000]=f6c3e000)
AtapiVirtToPhysAddr_: f6c3e000 -> 00000000:2747d000
  ph data[1]=0:2747c000 (1fff)
  get Phys(data[n=2+2000]=f6c3f000)
AtapiVirtToPhysAddr_: f6c3f000 -> 00000000:27476000
  ph data[2]=0:27476000 (fff)
  get Phys(data[n=3+1000]=f6c40000)
AtapiVirtToPhysAddr_: f6c40000 -> 00000000:2746f000
  ph data[3]=0:2746f000 (fff)
  get Phys(data[n=4+1000]=f6c41000)
AtapiVirtToPhysAddr_: f6c41000 -> 00000000:27478000
  ph data[4]=0:27478000 (fff)
  get Phys(data[n=5+1000]=f6c42000)
AtapiVirtToPhysAddr_: f6c42000 -> 00000000:27479000
  ph data[4]=0:27478000 (1fff)
  get Phys(data[n=5+2000]=f6c43000)
AtapiVirtToPhysAddr_: f6c43000 -> 00000000:2747a000
  ph data[4]=0:27478000 (2fff)
  get Phys(data[n=5+3000]=f6c44000)
AtapiVirtToPhysAddr_: f6c44000 -> 00000000:2747b000
  ph data[4]=0:27478000 (3fff)
  get Phys(data[n=5+4000]=f6c45000)
AtapiVirtToPhysAddr_: f6c45000 -> 00000000:27484000
  ph data[5]=0:27484000 (fff)
  get Phys(data[n=6+1000]=f6c46000)
AtapiVirtToPhysAddr_: f6c46000 -> 00000000:27485000
  ph data[5]=0:27484000 (1fff)
  get Phys(data[n=6+2000]=f6c47000)
AtapiVirtToPhysAddr_: f6c47000 -> 00000000:2747e000
  ph data[6]=0:2747e000 (fff)
  get Phys(data[n=7+1000]=f6c48000)
AtapiVirtToPhysAddr_: f6c48000 -> 00000000:27477000
  ph data[7]=0:27477000 (fff)
  get Phys(data[n=8+1000]=f6c49000)
AtapiVirtToPhysAddr_: f6c49000 -> 00000000:27480000
  set TERM
  ph data[8]=0:27480000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6781180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 11 request(s)!
AtapiStartIo: next Srb b5eb8570
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eb8390, CDB 0xb5eb83c0, AtaReq 0xb6778030, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=b
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf70035c0
** Ide: Command AtaReq 0xb6778030
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 39008270, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 39008270, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6778030: cmd aligned b6778100, d=70
  ahci_cmd_ptr 0xb6778100
AtapiDmaSetup: mode 0x0, data f6c4a000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6778100)
AtapiVirtToPhysAddr_: b6778100 -> 00000000:08e3b100
  get Phys(data[0]=f6c4a000)
AtapiVirtToPhysAddr_: f6c4a000 -> 00000000:27481000
  ph data[0]=0:27481000 (fff)
  get Phys(data[n=1+1000]=f6c4b000)
AtapiVirtToPhysAddr_: f6c4b000 -> 00000000:27482000
  ph data[0]=0:27481000 (1fff)
  get Phys(data[n=1+2000]=f6c4c000)
AtapiVirtToPhysAddr_: f6c4c000 -> 00000000:27483000
  ph data[0]=0:27481000 (2fff)
  get Phys(data[n=1+3000]=f6c4d000)
AtapiVirtToPhysAddr_: f6c4d000 -> 00000000:2748c000
  ph data[1]=0:2748c000 (fff)
  get Phys(data[n=2+1000]=f6c4e000)
AtapiVirtToPhysAddr_: f6c4e000 -> 00000000:2748d000
  ph data[1]=0:2748c000 (1fff)
  get Phys(data[n=2+2000]=f6c4f000)
AtapiVirtToPhysAddr_: f6c4f000 -> 00000000:27486000
  ph data[2]=0:27486000 (fff)
  get Phys(data[n=3+1000]=f6c50000)
AtapiVirtToPhysAddr_: f6c50000 -> 00000000:2747f000
  ph data[3]=0:2747f000 (fff)
  get Phys(data[n=4+1000]=f6c51000)
AtapiVirtToPhysAddr_: f6c51000 -> 00000000:27488000
  ph data[4]=0:27488000 (fff)
  get Phys(data[n=5+1000]=f6c52000)
AtapiVirtToPhysAddr_: f6c52000 -> 00000000:27489000
  ph data[4]=0:27488000 (1fff)
  get Phys(data[n=5+2000]=f6c53000)
AtapiVirtToPhysAddr_: f6c53000 -> 00000000:2748a000
  ph data[4]=0:27488000 (2fff)
  get Phys(data[n=5+3000]=f6c54000)
AtapiVirtToPhysAddr_: f6c54000 -> 00000000:2748b000
  ph data[4]=0:27488000 (3fff)
  get Phys(data[n=5+4000]=f6c55000)
AtapiVirtToPhysAddr_: f6c55000 -> 00000000:27494000
  ph data[5]=0:27494000 (fff)
  get Phys(data[n=6+1000]=f6c56000)
AtapiVirtToPhysAddr_: f6c56000 -> 00000000:27495000
  ph data[5]=0:27494000 (1fff)
  get Phys(data[n=6+2000]=f6c57000)
AtapiVirtToPhysAddr_: f6c57000 -> 00000000:2748e000
  ph data[6]=0:2748e000 (fff)
  get Phys(data[n=7+1000]=f6c58000)
AtapiVirtToPhysAddr_: f6c58000 -> 00000000:27487000
  ph data[7]=0:27487000 (fff)
  get Phys(data[n=8+1000]=f6c59000)
AtapiVirtToPhysAddr_: f6c59000 -> 00000000:27490000
  set TERM
  ph data[8]=0:27490000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6778100, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 12 request(s)!
AtapiStartIo: next Srb b5eb8390
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eb81b0, CDB 0xb5eb81e0, AtaReq 0xb677e0c0, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=c
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf70035c0
** Ide: Command AtaReq 0xb677e0c0
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
Attention: SCSIOP_WRITE on 2TB
IdeReadWrite (Orig REQ): Starting sector 390082f0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 390082f0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677e0c0: cmd aligned b677e180, d=60
  ahci_cmd_ptr 0xb677e180
AtapiDmaSetup: mode 0x0, data f6c5a000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677e180)
AtapiVirtToPhysAddr_: b677e180 -> 00000000:08e41180
  get Phys(data[0]=f6c5a000)
AtapiVirtToPhysAddr_: f6c5a000 -> 00000000:27491000
  ph data[0]=0:27491000 (fff)
  get Phys(data[n=1+1000]=f6c5b000)
AtapiVirtToPhysAddr_: f6c5b000 -> 00000000:27492000
  ph data[0]=0:27491000 (1fff)
  get Phys(data[n=1+2000]=f6c5c000)
AtapiVirtToPhysAddr_: f6c5c000 -> 00000000:27493000
  ph data[0]=0:27491000 (2fff)
  get Phys(data[n=1+3000]=f6c5d000)
AtapiVirtToPhysAddr_: f6c5d000 -> 00000000:2749c000
  ph data[1]=0:2749c000 (fff)
  get Phys(data[n=2+1000]=f6c5e000)
AtapiVirtToPhysAddr_: f6c5e000 -> 00000000:2749d000
  ph data[1]=0:2749c000 (1fff)
  get Phys(data[n=2+2000]=f6c5f000)
AtapiVirtToPhysAddr_: f6c5f000 -> 00000000:27496000
  ph data[2]=0:27496000 (fff)
  get Phys(data[n=3+1000]=f6c60000)
AtapiVirtToPhysAddr_: f6c60000 -> 00000000:2748f000
  ph data[3]=0:2748f000 (fff)
  get Phys(data[n=4+1000]=f6c61000)
AtapiVirtToPhysAddr_: f6c61000 -> 00000000:27498000
  ph data[4]=0:27498000 (fff)
  get Phys(data[n=5+1000]=f6c62000)
AtapiVirtToPhysAddr_: f6c62000 -> 00000000:27499000
  ph data[4]=0:27498000 (1fff)
  get Phys(data[n=5+2000]=f6c63000)
AtapiVirtToPhysAddr_: f6c63000 -> 00000000:2749a000
  ph data[4]=0:27498000 (2fff)
  get Phys(data[n=5+3000]=f6c64000)
AtapiVirtToPhysAddr_: f6c64000 -> 00000000:2749b000
  ph data[4]=0:27498000 (3fff)
  get Phys(data[n=5+4000]=f6c65000)
AtapiVirtToPhysAddr_: f6c65000 -> 00000000:274a4000
  ph data[5]=0:274a4000 (fff)
  get Phys(data[n=6+1000]=f6c66000)
AtapiVirtToPhysAddr_: f6c66000 -> 00000000:274a5000
  ph data[5]=0:274a4000 (1fff)
  get Phys(data[n=6+2000]=f6c67000)
AtapiVirtToPhysAddr_: f6c67000 -> 00000000:2749e000
  ph data[6]=0:2749e000 (fff)
  get Phys(data[n=7+1000]=f6c68000)
AtapiVirtToPhysAddr_: f6c68000 -> 00000000:27497000
  ph data[7]=0:27497000 (fff)
  get Phys(data[n=8+1000]=f6c69000)
AtapiVirtToPhysAddr_: f6c69000 -> 00000000:274a0000
  set TERM
  ph data[8]=0:274a0000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677e180, ch 0, dev 0
IdeReadWrite ahci io flags 45: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 13 request(s)!
AtapiStartIo: next Srb b5eb81b0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0xb5ef24e0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677c090, SCmd 0x28
UniataNeedQueueing: qd=c
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809faa18
** Ide: Command AtaReq 0xb677c090
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fee230, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677c090
  AHCI AtaReq CMD 0xb677c100 (ph 0x8e3f100)
  prd_length 0x10, flags 0x5, base 8e3f100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0xb5eed388
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb6782120, SCmd 0x28
UniataNeedQueueing: qd=b
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809faa18
** Ide: Command AtaReq 0xb6782120
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fee2b0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6782120
  AHCI AtaReq CMD 0xb6782200 (ph 0x8e45200)
  prd_length 0x10, flags 0x5, base 8e45200
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0xb5eb9150
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eb9150, CDB 0xb5eb9180, AtaReq 0xb677a060, SCmd 0x2a
UniataNeedQueueing: qd=a
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809faa18
** Ide: Command AtaReq 0xb677a060
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39008170, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677a060
  AHCI AtaReq CMD 0xb677a100 (ph 0x8e3d100)
  prd_length 0x9, flags 0x45, base 8e3d100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eb9150
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eb9150, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eb9150
AtapiInterrupt: NextRequest, srb=0xb5eb8390
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eb8390, CDB 0xb5eb83c0, AtaReq 0xb6778030, SCmd 0x2a
UniataNeedQueueing: qd=9
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809faa18
** Ide: Command AtaReq 0xb6778030
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39008270, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6778030
  AHCI AtaReq CMD 0xb6778100 (ph 0x8e3b100)
  prd_length 0x9, flags 0x45, base 8e3b100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eb8390
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eb8390, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eb8390
AtapiInterrupt: NextRequest, srb=0xb5eb81b0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eb81b0, CDB 0xb5eb81e0, AtaReq 0xb677e0c0, SCmd 0x2a
UniataNeedQueueing: qd=8
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809faa18
** Ide: Command AtaReq 0xb677e0c0
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390082f0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677e0c0
  AHCI AtaReq CMD 0xb677e180 (ph 0x8e41180)
  prd_length 0x9, flags 0x45, base 8e41180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eb81b0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eb81b0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eb81b0
AtapiInterrupt: NextRequest, srb=0xb5eb8570
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eb8570, CDB 0xb5eb85a0, AtaReq 0xb6781108, SCmd 0x2a
UniataNeedQueueing: qd=7
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809faa18
** Ide: Command AtaReq 0xb6781108
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390081f0, Count 0x80(0x1)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6781108
  AHCI AtaReq CMD 0xb6781180 (ph 0x8e44180)
  prd_length 0x9, flags 0x45, base 8e44180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eb8570
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=0, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eb8570, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eb8570
AtapiInterrupt: NextRequest, srb=0xb5ee6b08
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ee6b08, CDB 0xb5ee6b38, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=6
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809faa18
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fee330, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x10, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ee6b08
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ee6b08, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ee6b08
AtapiInterrupt: NextRequest, srb=0xb6346750
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb6346750, CDB 0xb6346780, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: qd=5
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809faa18
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fb4e70, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x10, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b6346750
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb6346750, status 1
AtapiInterrupt: RequestComplete, srb 0xb6346750
AtapiInterrupt: NextRequest, srb=0xb5ed6ed0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ed6ed0, CDB 0xb5ed6f00, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=4
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809faa18
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fb4ef0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0x10, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ed6ed0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ed6ed0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ed6ed0
AtapiInterrupt: NextRequest, srb=0xb5eba1e8
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eba1e8, CDB 0xb5eba218, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809faa18
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fb4f70, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x10, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eba1e8
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eba1e8, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eba1e8
AtapiInterrupt: NextRequest, srb=0xb5eba1a0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eba1a0, CDB 0xb5eba1d0, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809faa18
** Ide: Command AtaReq 0xb67800f0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fb4ff0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0
  AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180)
  prd_length 0x10, flags 0x5, base 8e43180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eba1a0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eba1a0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eba1a0
AtapiInterrupt: NextRequest, srb=0xb5eb9238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eb9238, CDB 0xb5eb9268, AtaReq 0xb677f0d8, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809faa18
** Ide: Command AtaReq 0xb677f0d8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390585e0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677f0d8
  AHCI AtaReq CMD 0xb677f180 (ph 0x8e42180)
  prd_length 0x2, flags 0x5, base 8e42180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eb9238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eb9238, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eb9238
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eb9150, CDB 0xb5eb9180, AtaReq 0xb677f0d8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5eb9150
TopLevel (3), AtaReq 0xb677f0d8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6c92d00
** Ide: Command AtaReq 0xb677f0d8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586c0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586c0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677f0d8: cmd aligned b677f180, d=48
  ahci_cmd_ptr 0xb677f180
AtapiDmaSetup: mode 0x0, data f6ff0000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677f180)
AtapiVirtToPhysAddr_: b677f180 -> 00000000:08e42180
  get Phys(data[0]=f6ff0000)
AtapiVirtToPhysAddr_: f6ff0000 -> 00000000:02858000
  ph data[0]=0:2858000 (fff)
  get Phys(data[n=1+1000]=f6ff1000)
AtapiVirtToPhysAddr_: f6ff1000 -> 00000000:afd59000
  set TERM
  ph data[1]=0:afd59000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677f180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586c0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677f0d8
  AHCI AtaReq CMD 0xb677f180 (ph 0x8e42180)
  prd_length 0x2, flags 0x5, base 8e42180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eb9150
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eb9150, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eb9150
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eb9150, CDB 0xb5eb9180, AtaReq 0xb677f0d8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5eb9150
TopLevel (3), AtaReq 0xb677f0d8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf704b40c
** Ide: Command AtaReq 0xb677f0d8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586b0, OrigWordsRequested 0xe00, DevSize 0xe
IdeReadWrite (REQ): Starting sector is 390586b0, Number of WORDS 0xe00, DevSize 0xe
  AtaReq 0xb677f0d8: cmd aligned b677f180, d=48
  ahci_cmd_ptr 0xb677f180
AtapiDmaSetup: mode 0x0, data f6c72000, count 1c00, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677f180)
AtapiVirtToPhysAddr_: b677f180 -> 00000000:08e42180
  get Phys(data[0]=f6c72000)
AtapiVirtToPhysAddr_: f6c72000 -> 00000000:02520000
  ph data[0]=0:2520000 (fff)
  get Phys(data[n=1+1000]=f6c73000)
AtapiVirtToPhysAddr_: f6c73000 -> 00000000:02531000
  set TERM
  ph data[1]=0:2531000 (bff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677f180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586b0, Count 0xe(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677f0d8
  AHCI AtaReq CMD 0xb677f180 (ph 0x8e42180)
  prd_length 0x2, flags 0x5, base 8e42180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eb9150
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered e00, WordsLeft e00
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 1c00, full size 1c00
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eb9150, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eb9150
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eb9150, CDB 0xb5eb9180, AtaReq 0xb677f0d8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5eb9150
TopLevel (3), AtaReq 0xb677f0d8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6c93174
** Ide: Command AtaReq 0xb677f0d8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677f0d8: cmd aligned b677f180, d=48
  ahci_cmd_ptr 0xb677f180
AtapiDmaSetup: mode 0x0, data f6c6e000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677f180)
AtapiVirtToPhysAddr_: b677f180 -> 00000000:08e42180
  get Phys(data[0]=f6c6e000)
AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:0bd6c000
  ph data[0]=0:bd6c000 (fff)
  get Phys(data[n=1+1000]=f6c6f000)
AtapiVirtToPhysAddr_: f6c6f000 -> 00000000:02865000
  set TERM
  ph data[1]=0:2865000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677f180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677f0d8
  AHCI AtaReq CMD 0xb677f180 (ph 0x8e42180)
  prd_length 0x2, flags 0x5, base 8e42180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eb9150
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eb9150, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eb9150
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eb9150, CDB 0xb5eb9180, AtaReq 0xb677f0d8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5eb9150
TopLevel (3), AtaReq 0xb677f0d8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9b600
** Ide: Command AtaReq 0xb677f0d8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fb5470, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fb5470, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677f0d8: cmd aligned b677f180, d=48
  ahci_cmd_ptr 0xb677f180
AtapiDmaSetup: mode 0x0, data f6c2a000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677f180)
AtapiVirtToPhysAddr_: b677f180 -> 00000000:08e42180
  get Phys(data[0]=f6c2a000)
AtapiVirtToPhysAddr_: f6c2a000 -> 00000000:025d7000
  ph data[0]=0:25d7000 (fff)
  get Phys(data[n=1+1000]=f6c2b000)
AtapiVirtToPhysAddr_: f6c2b000 -> 00000000:02590000
  ph data[1]=0:2590000 (fff)
  get Phys(data[n=2+1000]=f6c2c000)
AtapiVirtToPhysAddr_: f6c2c000 -> 00000000:025b1000
  ph data[2]=0:25b1000 (fff)
  get Phys(data[n=3+1000]=f6c2d000)
AtapiVirtToPhysAddr_: f6c2d000 -> 00000000:025aa000
  ph data[3]=0:25aa000 (fff)
  get Phys(data[n=4+1000]=f6c2e000)
AtapiVirtToPhysAddr_: f6c2e000 -> 00000000:0257b000
  ph data[4]=0:257b000 (fff)
  get Phys(data[n=5+1000]=f6c2f000)
AtapiVirtToPhysAddr_: f6c2f000 -> 00000000:02584000
  ph data[5]=0:2584000 (fff)
  get Phys(data[n=6+1000]=f6c30000)
AtapiVirtToPhysAddr_: f6c30000 -> 00000000:0257d000
  ph data[6]=0:257d000 (fff)
  get Phys(data[n=7+1000]=f6c31000)
AtapiVirtToPhysAddr_: f6c31000 -> 00000000:025b6000
  ph data[7]=0:25b6000 (fff)
  get Phys(data[n=8+1000]=f6c32000)
AtapiVirtToPhysAddr_: f6c32000 -> 00000000:026af000
  ph data[8]=0:26af000 (fff)
  get Phys(data[n=9+1000]=f6c33000)
AtapiVirtToPhysAddr_: f6c33000 -> 00000000:02568000
  ph data[9]=0:2568000 (fff)
  get Phys(data[n=10+1000]=f6c34000)
AtapiVirtToPhysAddr_: f6c34000 -> 00000000:026a1000
  ph data[10]=0:26a1000 (fff)
  get Phys(data[n=11+1000]=f6c35000)
AtapiVirtToPhysAddr_: f6c35000 -> 00000000:025b2000
  ph data[11]=0:25b2000 (fff)
  get Phys(data[n=12+1000]=f6c36000)
AtapiVirtToPhysAddr_: f6c36000 -> 00000000:025bb000
  ph data[12]=0:25bb000 (fff)
  get Phys(data[n=13+1000]=f6c37000)
AtapiVirtToPhysAddr_: f6c37000 -> 00000000:0258c000
  ph data[13]=0:258c000 (fff)
  get Phys(data[n=14+1000]=f6c38000)
AtapiVirtToPhysAddr_: f6c38000 -> 00000000:02585000
  ph data[14]=0:2585000 (fff)
  get Phys(data[n=15+1000]=f6c39000)
AtapiVirtToPhysAddr_: f6c39000 -> 00000000:025e6000
  set TERM
  ph data[15]=0:25e6000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677f180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fb5470, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677f0d8
  AHCI AtaReq CMD 0xb677f180 (ph 0x8e42180)
  prd_length 0x10, flags 0x5, base 8e42180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eb9150
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=1
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9b600
** Ide: Command AtaReq 0xb67800f0
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fb54f0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fb54f0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb67800f0: cmd aligned b6780180, d=30
  ahci_cmd_ptr 0xb6780180
AtapiDmaSetup: mode 0x0, data f6c3a000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6780180)
AtapiVirtToPhysAddr_: b6780180 -> 00000000:08e43180
  get Phys(data[0]=f6c3a000)
AtapiVirtToPhysAddr_: f6c3a000 -> 00000000:026b7000
  ph data[0]=0:26b7000 (fff)
  get Phys(data[n=1+1000]=f6c3b000)
AtapiVirtToPhysAddr_: f6c3b000 -> 00000000:02570000
  ph data[1]=0:2570000 (fff)
  get Phys(data[n=2+1000]=f6c3c000)
AtapiVirtToPhysAddr_: f6c3c000 -> 00000000:026a9000
  ph data[2]=0:26a9000 (fff)
  get Phys(data[n=3+1000]=f6c3d000)
AtapiVirtToPhysAddr_: f6c3d000 -> 00000000:02582000
  ph data[3]=0:2582000 (fff)
  get Phys(data[n=4+1000]=f6c3e000)
AtapiVirtToPhysAddr_: f6c3e000 -> 00000000:025c3000
  ph data[4]=0:25c3000 (fff)
  get Phys(data[n=5+1000]=f6c3f000)
AtapiVirtToPhysAddr_: f6c3f000 -> 00000000:02594000
  ph data[5]=0:2594000 (fff)
  get Phys(data[n=6+1000]=f6c40000)
AtapiVirtToPhysAddr_: f6c40000 -> 00000000:0258d000
  ph data[6]=0:258d000 (fff)
  get Phys(data[n=7+1000]=f6c41000)
AtapiVirtToPhysAddr_: f6c41000 -> 00000000:025ee000
  ph data[7]=0:25ee000 (fff)
  get Phys(data[n=8+1000]=f6c42000)
AtapiVirtToPhysAddr_: f6c42000 -> 00000000:026bf000
  ph data[8]=0:26bf000 (fff)
  get Phys(data[n=9+1000]=f6c43000)
AtapiVirtToPhysAddr_: f6c43000 -> 00000000:02578000
  ph data[9]=0:2578000 (fff)
  get Phys(data[n=10+1000]=f6c44000)
AtapiVirtToPhysAddr_: f6c44000 -> 00000000:026b1000
  ph data[10]=0:26b1000 (fff)
  get Phys(data[n=11+1000]=f6c45000)
AtapiVirtToPhysAddr_: f6c45000 -> 00000000:0258a000
  ph data[11]=0:258a000 (fff)
  get Phys(data[n=12+1000]=f6c46000)
AtapiVirtToPhysAddr_: f6c46000 -> 00000000:025cb000
  ph data[12]=0:25cb000 (fff)
  get Phys(data[n=13+1000]=f6c47000)
AtapiVirtToPhysAddr_: f6c47000 -> 00000000:0259c000
  ph data[13]=0:259c000 (fff)
  get Phys(data[n=14+1000]=f6c48000)
AtapiVirtToPhysAddr_: f6c48000 -> 00000000:025d5000
  ph data[14]=0:25d5000 (fff)
  get Phys(data[n=15+1000]=f6c49000)
AtapiVirtToPhysAddr_: f6c49000 -> 00000000:025fe000
  set TERM
  ph data[15]=0:25fe000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6780180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 2 request(s)!
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=2
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9b600
** Ide: Command AtaReq 0xb677b078
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fb5570, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fb5570, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb677b078: cmd aligned b677b100, d=28
  ahci_cmd_ptr 0xb677b100
AtapiDmaSetup: mode 0x0, data f6c4a000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677b100)
AtapiVirtToPhysAddr_: b677b100 -> 00000000:08e3e100
  get Phys(data[0]=f6c4a000)
AtapiVirtToPhysAddr_: f6c4a000 -> 00000000:026c7000
  ph data[0]=0:26c7000 (fff)
  get Phys(data[n=1+1000]=f6c4b000)
AtapiVirtToPhysAddr_: f6c4b000 -> 00000000:025b0000
  ph data[1]=0:25b0000 (fff)
  get Phys(data[n=2+1000]=f6c4c000)
AtapiVirtToPhysAddr_: f6c4c000 -> 00000000:026b9000
  ph data[2]=0:26b9000 (fff)
  get Phys(data[n=3+1000]=f6c4d000)
AtapiVirtToPhysAddr_: f6c4d000 -> 00000000:025ca000
  ph data[3]=0:25ca000 (fff)
  get Phys(data[n=4+1000]=f6c4e000)
AtapiVirtToPhysAddr_: f6c4e000 -> 00000000:026a3000
  ph data[4]=0:26a3000 (fff)
  get Phys(data[n=5+1000]=f6c4f000)
AtapiVirtToPhysAddr_: f6c4f000 -> 00000000:025d4000
  ph data[5]=0:25d4000 (fff)
  get Phys(data[n=6+1000]=f6c50000)
AtapiVirtToPhysAddr_: f6c50000 -> 00000000:025dd000
  ph data[6]=0:25dd000 (fff)
  get Phys(data[n=7+1000]=f6c51000)
AtapiVirtToPhysAddr_: f6c51000 -> 00000000:02606000
  ph data[7]=0:2606000 (fff)
  get Phys(data[n=8+1000]=f6c52000)
AtapiVirtToPhysAddr_: f6c52000 -> 00000000:026cf000
  ph data[8]=0:26cf000 (fff)
  get Phys(data[n=9+1000]=f6c53000)
AtapiVirtToPhysAddr_: f6c53000 -> 00000000:025b8000
  ph data[9]=0:25b8000 (fff)
  get Phys(data[n=10+1000]=f6c54000)
AtapiVirtToPhysAddr_: f6c54000 -> 00000000:026c1000
  ph data[10]=0:26c1000 (fff)
  get Phys(data[n=11+1000]=f6c55000)
AtapiVirtToPhysAddr_: f6c55000 -> 00000000:025d2000
  ph data[11]=0:25d2000 (fff)
  get Phys(data[n=12+1000]=f6c56000)
AtapiVirtToPhysAddr_: f6c56000 -> 00000000:026ab000
  ph data[12]=0:26ab000 (fff)
  get Phys(data[n=13+1000]=f6c57000)
AtapiVirtToPhysAddr_: f6c57000 -> 00000000:025dc000
  ph data[13]=0:25dc000 (fff)
  get Phys(data[n=14+1000]=f6c58000)
AtapiVirtToPhysAddr_: f6c58000 -> 00000000:026bd000
  ph data[14]=0:26bd000 (fff)
  get Phys(data[n=15+1000]=f6c59000)
AtapiVirtToPhysAddr_: f6c59000 -> 00000000:0260e000
  set TERM
  ph data[15]=0:260e000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677b100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 3 request(s)!
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=3
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9b600
** Ide: Command AtaReq 0xb6776000
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 38fb55f0, OrigWordsRequested 0x8000, DevSize 0x80
IdeReadWrite (REQ): Starting sector is 38fb55f0, Number of WORDS 0x8000, DevSize 0x80
  AtaReq 0xb6776000: cmd aligned b6776080, d=20
  ahci_cmd_ptr 0xb6776080
AtapiDmaSetup: mode 0x0, data f6c5a000, count 10000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6776080)
AtapiVirtToPhysAddr_: b6776080 -> 00000000:08e39080
  get Phys(data[0]=f6c5a000)
AtapiVirtToPhysAddr_: f6c5a000 -> 00000000:0260f000
  ph data[0]=0:260f000 (fff)
  get Phys(data[n=1+1000]=f6c5b000)
AtapiVirtToPhysAddr_: f6c5b000 -> 00000000:025c0000
  ph data[1]=0:25c0000 (fff)
  get Phys(data[n=2+1000]=f6c5c000)
AtapiVirtToPhysAddr_: f6c5c000 -> 00000000:02671000
  ph data[2]=0:2671000 (fff)
  get Phys(data[n=3+1000]=f6c5d000)
AtapiVirtToPhysAddr_: f6c5d000 -> 00000000:025da000
  ph data[3]=0:25da000 (fff)
  get Phys(data[n=4+1000]=f6c5e000)
AtapiVirtToPhysAddr_: f6c5e000 -> 00000000:026b3000
  ph data[4]=0:26b3000 (fff)
  get Phys(data[n=5+1000]=f6c5f000)
AtapiVirtToPhysAddr_: f6c5f000 -> 00000000:025e4000
  ph data[5]=0:25e4000 (fff)
  get Phys(data[n=6+1000]=f6c60000)
AtapiVirtToPhysAddr_: f6c60000 -> 00000000:026c5000
  ph data[6]=0:26c5000 (fff)
  get Phys(data[n=7+1000]=f6c61000)
AtapiVirtToPhysAddr_: f6c61000 -> 00000000:02616000
  ph data[7]=0:2616000 (fff)
  get Phys(data[n=8+1000]=f6c62000)
AtapiVirtToPhysAddr_: f6c62000 -> 00000000:02617000
  ph data[7]=0:2616000 (1fff)
  get Phys(data[n=8+2000]=f6c63000)
AtapiVirtToPhysAddr_: f6c63000 -> 00000000:025c8000
  ph data[8]=0:25c8000 (fff)
  get Phys(data[n=9+1000]=f6c64000)
AtapiVirtToPhysAddr_: f6c64000 -> 00000000:02681000
  ph data[9]=0:2681000 (fff)
  get Phys(data[n=10+1000]=f6c65000)
AtapiVirtToPhysAddr_: f6c65000 -> 00000000:025e2000
  ph data[10]=0:25e2000 (fff)
  get Phys(data[n=11+1000]=f6c66000)
AtapiVirtToPhysAddr_: f6c66000 -> 00000000:026bb000
  ph data[11]=0:26bb000 (fff)
  get Phys(data[n=12+1000]=f6c67000)
AtapiVirtToPhysAddr_: f6c67000 -> 00000000:025ec000
  ph data[12]=0:25ec000 (fff)
  get Phys(data[n=13+1000]=f6c68000)
AtapiVirtToPhysAddr_: f6c68000 -> 00000000:026cd000
  ph data[13]=0:26cd000 (fff)
  get Phys(data[n=14+1000]=f6c69000)
AtapiVirtToPhysAddr_: f6c69000 -> 00000000:0bd86000
  set TERM
  ph data[14]=0:bd86000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6776080, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 4 request(s)!
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eb8390, CDB 0xb5eb83c0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=4
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6c73230
** Ide: Command AtaReq 0xb6779048
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39058740, OrigWordsRequested 0x200, DevSize 0x2
IdeReadWrite (REQ): Starting sector is 39058740, Number of WORDS 0x200, DevSize 0x2
  AtaReq 0xb6779048: cmd aligned b6779100, d=58
  ahci_cmd_ptr 0xb6779100
AtapiDmaSetup: mode 0x0, data f6c6e000, count 400, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b6779100)
AtapiVirtToPhysAddr_: b6779100 -> 00000000:08e3c100
  get Phys(data[0]=f6c6e000)
AtapiVirtToPhysAddr_: f6c6e000 -> 00000000:026d5000
  set TERM
  ph data[0]=0:26d5000 (3ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b6779100, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 5 request(s)!
AtapiStartIo: next Srb b5eb8390
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eb81b0, CDB 0xb5eb81e0, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=5
Non-empty queue
Try IDE prepare
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6c92d00
** Ide: Command AtaReq 0xb677d0a8
** --- **
** Ide: Command continue prep
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6ff0000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6ff0000)
AtapiVirtToPhysAddr_: f6ff0000 -> 00000000:025bd000
  ph data[0]=0:25bd000 (fff)
  get Phys(data[n=1+1000]=f6ff1000)
AtapiVirtToPhysAddr_: f6ff1000 -> 00000000:0274e000
  set TERM
  ph data[1]=0:274e000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
IdeSendCommand: SRB_STATUS_PENDING
AtapiStartIo: Already have 6 request(s)!
AtapiStartIo: next Srb b5eb81b0
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eb9150, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eb9150
AtapiInterrupt: NextRequest, srb=0xb5eed388
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eed388, CDB 0xb5eed3b8, AtaReq 0xb67800f0, SCmd 0x28
UniataNeedQueueing: qd=5
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809faa18
** Ide: Command AtaReq 0xb67800f0
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fb54f0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb67800f0
  AHCI AtaReq CMD 0xb6780180 (ph 0x8e43180)
  prd_length 0x10, flags 0x5, base 8e43180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eed388
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eed388, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eed388
AtapiInterrupt: NextRequest, srb=0xb5ef24e0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef24e0, CDB 0xb5ef2510, AtaReq 0xb677b078, SCmd 0x28
UniataNeedQueueing: qd=4
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809faa18
** Ide: Command AtaReq 0xb677b078
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fb5570, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677b078
  AHCI AtaReq CMD 0xb677b100 (ph 0x8e3e100)
  prd_length 0x10, flags 0x5, base 8e3e100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef24e0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef24e0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef24e0
AtapiInterrupt: NextRequest, srb=0xb5ef2528
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb6776000, SCmd 0x28
UniataNeedQueueing: qd=3
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809faa18
** Ide: Command AtaReq 0xb6776000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x38fb55f0, Count 0x80(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6776000
  AHCI AtaReq CMD 0xb6776080 (ph 0x8e39080)
  prd_length 0xf, flags 0x5, base 8e39080
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x0
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0xe017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0xd0
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x1
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 8000, WordsLeft 8000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 10000, full size 10000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0xb5eb81b0
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eb81b0, CDB 0xb5eb81e0, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: qd=2
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809faa18
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x2, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eb81b0
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eb81b0, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eb81b0
AtapiInterrupt: NextRequest, srb=0xb5eb8390
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5eb8390, CDB 0xb5eb83c0, AtaReq 0xb6779048, SCmd 0x28
UniataNeedQueueing: qd=1
Send to device 28
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809fa970
** Ide: Command AtaReq 0xb6779048
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (ExecOnly): 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39058740, Count 0x2(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb6779048
  AHCI AtaReq CMD 0xb6779100 (ph 0x8e3c100)
  prd_length 0x1, flags 0x5, base 8e3c100
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5eb8390
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 1
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000
 AHCI: complete mask 0x0
  AHCI port 0 Base: 0xf778d100 MemIo 1 Proc 0
  AHCI0_0x0 (0xf778d100) = 0x913c000
  AHCI0_0x4 (0xf778d104) = 0x0
  AHCI0_0x8 (0xf778d108) = 0x913c400
  AHCI0_0xc (0xf778d10c) = 0x0
  AHCI0_0x10 (0xf778d110) = 0x1
  AHCI0_0x14 (0xf778d114) = 0xfd4000ff
  AHCI0_0x18 (0xf778d118) = 0x6017
  AHCI0_0x1c (0xf778d11c) = 0x0
  AHCI0_0x20 (0xf778d120) = 0x50
  AHCI0_0x24 (0xf778d124) = 0x101
  AHCI0_0x28 (0xf778d128) = 0x123
  AHCI0_0x2c (0xf778d12c) = 0x300
  AHCI0_0x30 (0xf778d130) = 0x0
  AHCI0_0x34 (0xf778d134) = 0x0
  AHCI0_0x38 (0xf778d138) = 0x0
  AHCI0_0x3c (0xf778d13c) = 0x0
 AHCI: unexpected, incomplete command or error ?
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 0)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 200, WordsLeft 200
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 400, full size 400
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5eb8390, status 1
AtapiInterrupt: RequestComplete, srb 0xb5eb8390
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef2528
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9b230
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39058710, OrigWordsRequested 0x400, DevSize 0x4
IdeReadWrite (REQ): Starting sector is 39058710, Number of WORDS 0x400, DevSize 0x4
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6ff0000, count 800, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6ff0000)
AtapiVirtToPhysAddr_: f6ff0000 -> 00000000:02588000
  set TERM
  ph data[0]=0:2588000 (7ff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x39058710, Count 0x4(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x1, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 400, WordsLeft 400
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 800, full size 800
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef2528
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6f9ad00
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6ff0000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6ff0000)
AtapiVirtToPhysAddr_: f6ff0000 -> 00000000:afd58000
  ph data[0]=0:afd58000 (fff)
  get Phys(data[n=1+1000]=f6ff1000)
AtapiVirtToPhysAddr_: f6ff1000 -> 00000000:0bd69000
  set TERM
  ph data[1]=0:bd69000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x2, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef2528
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6c72d00
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 390586d0, OrigWordsRequested 0x1000, DevSize 0x10
IdeReadWrite (REQ): Starting sector is 390586d0, Number of WORDS 0x1000, DevSize 0x10
  AtaReq 0xb677d0a8: cmd aligned b677d180, d=78
  ahci_cmd_ptr 0xb677d180
AtapiDmaSetup: mode 0x0, data f6ff0000, count 2000, lCh 0, dev 0
AtapiDmaSetup: Not DMA mode, assume this is just preparation
  get Phys(AHCI_CMD=b677d180)
AtapiVirtToPhysAddr_: b677d180 -> 00000000:08e40180
  get Phys(data[0]=f6ff0000)
AtapiVirtToPhysAddr_: f6ff0000 -> 00000000:02869000
  ph data[0]=0:2869000 (fff)
  get Phys(data[n=1+1000]=f6ff1000)
AtapiVirtToPhysAddr_: f6ff1000 -> 00000000:028b2000
  set TERM
  ph data[1]=0:28b2000 (fff)
AtapiDmaSetup: OK
IdeReadWrite: setup AHCI FIS
  AHCI setup FIS b677d180, ch 0, dev 0
IdeReadWrite ahci io flags 5: 
AtapiDmaReinit: ahci, nothing to do for HDD
IdeReadWrite: Lba 0x390586d0, Count 0x10(0x0)
UniataAhciBeginTransaction: lChan 0, AtaReq 0xb677d0a8
  AHCI AtaReq CMD 0xb677d180 (ph 0x8e40180)
  prd_length 0x2, flags 0x5, base 8e40180
ReadChannelPort4 ch0[18] = 6017
  CMD 0x6017
  Set CI
WriteChannelPort4 1 => ch0[38]
  No CMD START, already active
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b5ef2528
AtapiStartIo: query PORT for next request
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 2)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 1
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 1 => ch0[10]
 AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x1
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
UniataAhciEndTransaction: lChan 0
ReadChannelPort4 ch0[20] = 50
  TFD 0x50
ReadChannelPort4 ch0[34] = 0
ReadChannelPort4 ch0[38] = 0
AtapiInterrupt: Entered with status (0x50)
  AHCI branch (IDE)
AtapiInterrupt: i-reason=2, status=0x58
  AHCI path, WordsTransfered 1000, WordsLeft 1000
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 2000, full size 2000
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb5ef2528, status 1
AtapiInterrupt: RequestComplete, srb 0xb5ef2528
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
AtapiInterrupt2: NOT ACTIVE cntrlr 0x1 chan 0x0
Intr: DeviceID+VendorID/Rev 0x43911002/0x0 (ex 1)
AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x1 chan 0x0
AtapiInterrupt(base): cntrlr 0x1 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
imp: 0x3 & 0x1
UniataAhciStatus(0-0):
 hIS 0x1
ReadChannelPort4 ch0[10] = 0
ReadChannelPort4 ch0[38] = 0
ReadChannelPort4 ch0[34] = 0
WriteChannelPort4 0 => ch0[10]
 AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000
 AHCI: complete mask 0x0
AtapiInterrupt:
  cntrlr 0x1:0, irql 0x10, c 0
  DmaTransfer = TRUE
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   DeviceID+VendorID/Rev 0x43911002/0x0
imp: 0x3 & 0x1
  SRB 0xb5ef2528, CDB 0xb5ef2558, AtaReq 0xb677d0a8, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb5ef2528
TopLevel (3), AtaReq 0xb677d0a8
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf6c73230
** Ide: Command AtaReq 0xb677d0a8
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 39058700, OrigWordsRequested 0x400, DevSize 0x4